Functional importance of tyrosine 294 and the catalytic selectivity for the bis-Fe(IV) state of MauG revealed by replacement of this axial heme ligand with histidine

Antioxidant Nanozymes: Mechanisms, Activity Manipulation, and Applications

Antioxidant enzymes such as catalase, superoxide dismutase, and glutathione peroxidase play important roles in the inhibition of oxidative-damage-related pathological diseases. However, natural antioxidant enzymes face some limitations, including low stability, high cost, and less flexibility. Recently, antioxidant nanozymes have emerged as promising materials to replace natural antioxidant enzymes for their stability, cost savings, and flexible design. The present review firstly discusses the mechanisms of antioxidant nanozymes, focusing on catalase-, superoxide dismutase-, and glutathione peroxidase-like activities. Then, we summarize the main strategies for the manipulation of antioxidant nanozymes based on their size, morphology, composition, surface modification, and modification with a metal-organic framework. Furthermore, the applications of antioxidant nanozymes in medicine and healthcare are also discussed as potential biological applications. In brief, this review provides useful information for the further development of antioxidant nanozymes, offering opportunities to improve current limitations and expand the application of antioxidant nanozymes.

Tryptophan Can Promote Oxygen Reduction to Water in a Biosynthetic Model of Heme Copper Oxidases

Heme-copper oxidases (HCOs) utilize tyrosine (Tyr) to donate one of the four electrons required for the reduction of O₂ to water in biological respiration, while tryptophan (Trp) is speculated to fulfill the same role in cyt bd oxidases. We previously engineered myoglobin into a biosynthetic model of HCOs and demonstrated the critical role that Tyr serves in the oxygen reduction reaction (ORR). To address the roles of Tyr and Trp in these oxidases, we herein report the preparation of the same biosynthetic model with the Tyr replaced by Trp and further demonstrate that Trp can also promote the ORR, albeit with lower activity. An X-ray crystal structure of the Trp variant shows a hydrogen-bonding network involving two water molecules that are organized by Trp, similar to that in the Tyr variant, which is absent in the crystal structure with the native Phe residue. Additional electron paramagnetic resonance measurements are consistent with the formation of a Trp radical species upon reacting with H₂O₂. We attribute the lower activity of the Trp variant to Trp's higher reduction potential relative to Tyr. Together, these findings demonstrate, for the first time, that Trp can indeed promote the ORR and provides a structural basis for the observation of varying activities. The results support a redox role for the conserved Trp in bd oxidase while suggesting that HCOs use Tyr instead of Trp to achieve higher reactivity.

'Switch to love, switch to kill-dose and light co-regulate iron single-atom nanozyme to modulate cell fate

Remote control of cells and the regulation of cell events at the molecular level are of great interest to the biomedical field. In addition to mechanical forces and genes, chemical compounds and light play pivotal roles in regulating cell fate, which have boosted the fast growth of biology. Herein, we synthesized light-regulated, atomically dispersed Fe-N₄immobilized on a carbon substrate nanozyme (Fe-N/C single atom catalysts), whose peroxidase- and catalase-like properties can be enhanced by 120% and 135%, respectively, under 808-nm laser irradiation through the photothermal effect of Fe-N/C. Interestingly, a switch to love/switch to kill interaction between Fe-N/C dose and near-infrared (NIR) light co-regulating the Fe-N/C nanozyme to modulate cell fate was discovered. Based on this, we found that under NIR light irradiation, when the dose of Fe-N/C is low, it can scavenge more reactive oxygen species (ROS) and achieve cell protection; when the dose of Fe-N/C is too high, it tended to lead to cell apoptosis. This work not only provides an effective strategy for the regulation of nanozyme activity but also realizes the dual-functional application of nanozyme materials for the treatment of some specific diseases.

Protein-stabilized Ir nanoparticles with usual charge-selective peroxidase properties

Selective removal of an organic compound in the coexistence of other constituents is a great challenge in separation and purification processes. In this work, bovine serum albumin (BSA)-stabilized iridium nanoparticles (IrNPs) were prepared via a facile one-step precipitation method. The resulting BSA-IrNPs were comprehensively characterized by TEM, XRD, XPS, UV-vis, FT-IR, and fluorescence spectroscopy as well as circular dichroism spectrometry. It was found that the nanoparticles with an average diameter of 3.6 nm were embedded in the aggregated protein matrix and the structure of the coating agent was maintained well on the surface of nanoparticles. The as-prepared nanozymes (BSA-IrNPs) exhibit strong peroxidase-like activity and can selectively catalyse the degradation of cationic compounds by H₂O₂ in the coexistence of other inorganic or organic substances at room temperature. Interestingly, the degradation of amino acids could be precisely controlled by adjusting the pH above or below their isoelectric points. The catalytic selectivity of BSA-IrNPs should be ascribed to the anchoring effect between the amidogen-containing molecules and BSA through electrostatic adsorption. The nanozyme also exhibits excellent reusability as it can be readily recycled from solution by static settlement or centrifugation. Therefore, BSA-IrNPs have great potential for the selective removal of cationic compounds and amino acids in a complex matrix.

A Stable Ferryl Porphyrin at the Active Site of Y463M BthA

BthA is a diheme enzyme that is a member of the bacterial cytochrome c peroxidase superfamily, capable of generating a highly unusual Fe(IV)Fe(IV)═O oxidation state, known to be responsible for long-range oxidative chemistry in the enzyme MauG. Here, we show that installing a canonical Met ligand in lieu of the Tyr found at the heme of MauG associated with electron transfer, results in a construct that yields an unusually stable Fe(IV)═O porphyrin at the peroxidatic heme. This state is spontaneously formed at ambient conditions using either molecular O₂ or H₂O₂. The resulting data illustrate how a ferryl iron, with unforeseen stability, may be achieved in biology.

ZIF-67 as a Template Generating and Tuning "Raisin Pudding"-Type Nanozymes with Multiple Enzyme-like Activities: Toward Online Electrochemical Detection of 3,4-Dihydroxyphenylacetic Acid in Living Brains

Due to its unique structure and high porosity, metal-organic frameworks (MOFs) can act not only as nanozyme materials but also as carriers to encapsulate natural enzymes and thus have received extensive attention in recent years. However, a few research studies have been conducted to investigate MOF as a template to generate and tune nanozymes in the structure and performance. In this work, the "raisin pudding"-type ZIF-67/Cu_0.76Co_2.24O₄ nanospheres (ZIF-67/Cu_0.76Co_2.24O₄ NSs) were obtained by rationally regulating the weight ratio of ZIF-67 and Cu(NO₃)₂ in the synthesis process. Here, ZIF-67 not only acts as a template but also provides a cobalt source for the synthesis of cobalt copper oxide on the surface of ZIF-67/Cu_0.76Co_2.24O₄ NSs with multiple enzyme-like activities. The ZIF-67/Cu_0.76Co_2.24O₄ NSs can mimic four kinds of enzymes with peroxidase-like, glutathione peroxidase-like, superoxide dismutase-like, and laccase-like activities. Based on its laccase-like activity, an online electrochemical system for continuous monitoring of 3,4-dihydroxyphenylacetic acid with good linearity in the range of 0.5-20 μM and a detection limit of 0.15 μM was established. Furthermore, the alteration of DOPAC in the brain microdialysate before and after ischemia of the rats' brain was also successfully recorded. This work not only raises a new idea for the synthesis of nanozyme materials with multiple enzyme activities but also provides a new solution for the detection of neurotransmitters in living brains.

Nanozyme-based electrochemical biosensors for disease biomarker detection

In recent years, a new group of nanomaterials named nanozymes that exhibit enzyme-mimicking catalytic activity has emerged as a promising alternative to natural enzymes. Nanozymes can address some of the intrinsic limitations of natural enzymes such as high cost, low stability, difficulty in storage, and specific working conditions (i.e., narrow substrate, temperature and pH ranges). Thus, synthesis and applications of hybrid and stimuli-responsive advanced nanozymes could revolutionize the current practice in life sciences and biosensor applications. On the other hand, electrochemical biosensors have long been used as an efficient way for quantitative detection of analytes (biomarkers) of interest. As such, the use of nanozymes in electrochemical biosensors is particularly important to achieve low cost and stable biosensors for prognostics, diagnostics, and therapeutic monitoring of diseases. Herein, we summarize the recent advances in the synthesis and classification of common nanozymes and their application in electrochemical biosensor development. After briefly overviewing the applications of nanozymes in non-electrochemical-based biomolecular sensing systems, we thoroughly discuss the state-of-the-art advances in nanozyme-based electrochemical biosensors, including genosensors, immunosensors, cytosensors and aptasensors. The applications of nanozymes in microfluidic-based assays are also discussed separately. We also highlight the challenges of nanozyme-based electrochemical biosensors and provide some possible strategies to address these limitations. Finally, future perspectives on the development of nanozyme-based electrochemical biosensors for disease biomarker detection are presented. We envisage that standardization of nanozymes and their fabrication process may bring a paradigm shift in biomolecular sensing by fabricating highly specific, multi-enzyme mimicking nanozymes for highly sensitive, selective, and low-biofouling electrochemical biosensors.

A widely distributed diheme enzyme from Burkholderia that displays an atypically stable bis-Fe(IV) state

Bacterial diheme peroxidases represent a diverse enzyme family with functions that range from hydrogen peroxide (H2O2) reduction to post-translational modifications. By implementing a sequence similarity network (SSN) of the bCCP_MauG superfamily, we present the discovery of a unique diheme peroxidase BthA conserved in all Burkholderia. Using a combination of magnetic resonance, near-IR and Mössbauer spectroscopies and electrochemical methods, we report that BthA is capable of generating a bis-Fe(IV) species previously thought to be a unique feature of the diheme enzyme MauG. However, BthA is not MauG-like in that it catalytically converts H2O2 to water, and a 1.54-Å resolution crystal structure reveals striking differences between BthA and other superfamily members, including the essential residues for both bis-Fe(IV) formation and H2O2 turnover. Taken together, we find that BthA represents a previously undiscovered class of diheme enzymes, one that stabilizes a bis-Fe(IV) state and catalyzes H2O2 turnover in a mechanistically distinct manner.

Nanozymes: Classification, Catalytic Mechanisms, Activity Regulation, and Applications

Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

Protein-Derived Cofactors Revisited: Empowering Amino Acid Residues with New Functions

A protein-derived cofactor is a catalytic or redox-active site in a protein that is formed by post-translational modification of one or more amino acid residues. These post-translational modifications are irreversible and endow the modified amino acid residues with new functional properties. This Perspective focuses on the following advances in this area that have occurred during recent years. The biosynthesis of the tryptophan tryptophylquinone cofactor is catalyzed by a diheme enzyme, MauG. A bis-Fe^IV redox state of the hemes performs three two-electron oxidations of specific Trp residues via long-range electron transfer. In contrast, a flavoenzyme catalyzes the biosynthesis of the cysteine tryptophylquinone (CTQ) cofactor present in a newly discovered family of CTQ-dependent oxidases. Another carbonyl cofactor, the pyruvoyl cofactor found in classes of decarboxylases and reductases, is formed during an apparently autocatalytic cleavage of a precursor protein at the N-terminus of the cleavage product. It has been shown that in at least some cases, the cleavage is facilitated by binding to an accessory protein. Tyrosylquinonine cofactors, topaquinone and lysine tyrosylquinone, are found in copper-containing amine oxidases and lysyl oxidases, respectively. The physiological roles of different families of these enzymes in humans have been more clearly defined and shown to have significant implications with respect to human health. There has also been continued characterization of the roles of covalently cross-linked amino acid side chains that influence the reactivity of redox-active metal centers in proteins. These include Cys-Tyr species in galactose oxidase and cysteine dioxygenase and the Met-Tyr-Trp species in the catalase-peroxidase KatG.

Properties of the high-spin heme of MauG are altered by binding of preMADH at the protein surface 40 Å away

The diheme enzyme MauG catalyzes oxidative post-translational modifications of a protein substrate, precursor protein of methylamine dehydrogenase (preMADH), that binds to the surface of MauG. The high-spin heme iron of MauG is located 40 Å from preMADH. The ferric heme is an equilibrium of five- and six-coordinate states. PreMADH binding increases the proportion of five-coordinate heme three-fold. On reaction of MauG with H₂ O₂ both hemes become Fe^IV . In the absence of preMADH the hemes autoreduce to ferric in a multistep process involving multiple electron and proton transfers. Binding of preMADH in the absence of catalysis alters the mechanism of autoreduction of the ferryl heme. Thus, substrate binding alters the environment in the distal heme pocket of the high-spin heme over very long distance.

Fractional transfer of a free unpaired electron to overcome energy barriers in the formation of Fe(4+) from Fe(3+) during the core contraction of macrocycles: implication for heme distortion

The free unpaired electron in Fe(3+) ions cannot be directly removed, and needs a transfer pathway with at least four steps to overcome the high energy barriers to form Fe(4+) ions. Fine changes in the electronic structure of Fe(3+) ions on spin conversion were identified through a deeper analysis of the diffraction, spectral and electrochemical data for six non-planar iron porphyrins. Fe(3+) ions can form four d electron tautomers as the compression of the central ion is increased. This indicates that the Fe(3+) ion undergoes a multistep electron transfer where the total energy gap of electron transfer is split into several smaller gaps to form high-valent Fe(4+) ions. We find that the interchange of these four electron tautomers is clearly related to the core size of the macrocycle in the current series. The large energy barrier to produce iron(iv) complexes is overcome through a gradient effect of multiple energy levels. In addition, a possible porphyrin Fe(3+)˙ radical may be formed from its stable isoelectronic form, porphyrin Fe(3+), under strong core contraction. These results indicate the important role of heme distortion in its catalytic oxidation functions.

Converting the bis-FeIV state of the diheme enzyme MauG to Compound I decreases the reorganization energy for electron transfer

The electron transfer (ET) properties of two types of high-valent hemes were studied within the same protein matrix; the bis-Fe(IV) state of MauG and the Compound I state of Y294H MauG. The latter is formed as a consequence of mutation of the tyrosine which forms the distal axial ligand of the six-coordinate heme that allows it to stabilize Fe(IV) in the absence of an external ligand. The rates of the ET reaction of each high-valent species with the type I copper protein, amicyanin, were determined at different temperatures and analysed by ET theory. The reaction with bis-Fe(IV) wild-type (WT) MauG exhibited a reorganization energy (λ) that was 0.39 eV greater than that for the reaction of Compound I Y295H MauG. It is concluded that the delocalization of charge over the two hemes in the bis-Fe(IV) state is responsible for the larger λ, relative to the Compound I state in which the Fe(V) equivalent is isolated on one heme. Although the increase in λ decreases the rate of ET, the delocalization of charge decreases the ET distance to its natural substrate protein, thus increasing the ET rate. This describes how proteins can balance different ET properties of complex redox cofactors to optimize each system for its particular ET or catalytic reaction.

Roles of multiple-proton transfer pathways and proton-coupled electron transfer in the reactivity of the bis-FeIV state of MauG

The high-valent state of the diheme enzyme MauG exhibits charge-resonance (CR) stabilization in which the major species is a bis-Fe(IV) state with one heme present as Fe(IV)=O and the other as Fe(IV) with axial heme ligands provided by His and Tyr side chains. In the absence of its substrate, the high-valent state is relatively stable and returns to the diferric state over several minutes. It is shown that this process occurs in two phases. The first phase is redistribution of the resonance species that support the CR. The second phase is the loss of CR and reduction to the diferric state. Thermodynamic analysis revealed that the rates of the two phases exhibited different temperature dependencies and activation energies of 8.9 and 19.6 kcal/mol. The two phases exhibited kinetic solvent isotope effects of 2.5 and 2.3. Proton inventory plots of each reaction phase exhibited extreme curvature that could not be fit to models for one- or multiple-proton transfers in the transition state. Each did fit well to a model for two alternative pathways for proton transfer, each involving multiple protons. In each case the experimentally determined fractionation factors were consistent with one of the pathways involving tunneling. The percent of the reaction that involved the tunneling pathway differed for the two reaction phases. Using the crystal structure of MauG it was possible to propose proton-transfer pathways consistent with the experimental data using water molecules and amino acid side chains in the distal pocket of the high-spin heme.

A T67A mutation in the proximal pocket of the high-spin heme of MauG stabilizes formation of a mixed-valent FeII/FeIII state and enhances charge resonance stabilization of the bis-FeIV state

The diheme enzyme MauG catalyzes a six-electron oxidation required for posttranslational modification of a precursor of methylamine dehydrogenase (preMADH) to complete the biosynthesis of its protein-derived tryptophan tryptophylquinone (TTQ) cofactor. One heme is low-spin with ligands provided by His205 and Tyr294, and the other is high-spin with a ligand provided by His35. The side chain methyl groups of Thr67 and Leu70 are positioned at a distance of 3.4Å on either side of His35, maintaining a hydrophobic environment in the proximal pocket of the high-spin heme and restricting the movement of this ligand. Mutation of Thr67 to Ala in the proximal pocket of the high-spin heme prevented reduction of the low-spin heme by dithionite, yielding a mixed-valent state. The mutation also enhanced the stabilization of the charge-resonance-transition of the high-valent bis-FeIV state that is generated by addition of H2O2. The rates of electron transfer from TTQ biosynthetic intermediates to the high-valent form of T67A MauG were similar to that of wild-type MauG. These results are compared to those previously reported for mutation of residues in the distal pocket of the high-spin heme that also affected the redox properties and charge resonance transition stabilization of the high-valent state of the hemes. However, given the position of residue 67, the structure of the variant protein and the physical nature of the T67A mutation, the basis for the effects of the T67A mutation must be different from those of the mutations of the residues in the distal heme pocket.

Probing bis-Fe(IV) MauG: experimental evidence for the long-range charge-resonance model

The biosynthesis of tryptophan tryptophylquinone, a protein-derived cofactor, involves a long-range reaction mediated by a bis-Fe(IV) intermediate of a diheme enzyme, MauG. Recently, a unique charge-resonance (CR) phenomenon was discovered in this intermediate, and a biological, long-distance CR model was proposed. This model suggests that the chemical nature of the bis-Fe(IV) species is not as simple as it appears; rather, it is composed of a collection of resonance structures in a dynamic equilibrium. Here, we experimentally evaluated the proposed CR model by introducing small molecules to, and measuring the temperature dependence of, bis-Fe(IV) MauG. Spectroscopic evidence was presented to demonstrate that the selected compounds increase the decay rate of the bis-Fe(IV) species by disrupting the equilibrium of the resonance structures that constitutes the proposed CR model. The results support this new CR model and bring a fresh concept to the classical CR theory.

Bis-Fe(IV): nature's sniper for long-range oxidation

Iron-dependent enzymes are prevalent in nature and participate in a wide range of biological redox activities. Frequently, high-valence iron intermediates are involved in the catalytic events of iron-dependent enzymes, especially when the activation of peroxide or molecular oxygen is involved. Building on the fundamental framework of iron-oxygen chemistry, these reactive intermediates constantly attract significant attention from the enzymology community. During the past few decades, tremendous efforts from a number of laboratories have been dedicated to the capture and characterization of these intermediates to improve mechanistic understandings. In 2008, an unprecedented bis-Fe(IV) intermediate was reported in a c-type diheme enzyme, MauG, which is involved in the maturation of a tryptophan tryptophylquinone cofactor of methylamine dehydrogenase. This intermediate, although chemically equivalent to well-characterized high-valence iron intermediates, such as compound I, compound ES, and intermediate Q in methane monooxygenase, as well as the hypothetical Fe(V) species in Rieske non-heme oxygenases, is orders of magnitude more stable than these other high-valence species in the absence of its primary substrate. It has recently been discovered that the bis-Fe(IV) intermediate exhibits a unique near-IR absorption feature which has been attributed to a novel charge-resonance phenomenon. This review compares the properties of MauG with structurally related enzymes, summarizes the current knowledge of this new high-valence iron intermediate, including its chemical origin and structural basis, explores the formation and consequences of charge resonance, and recounts the long-range catalytic mechanism in which bis-Fe(IV) participates. Biological strategies for storing oxidizing equivalents with iron ions are also discussed.

Site-directed mutagenesis of Gln103 reveals the influence of this residue on the redox properties and stability of MauG

The diheme enzyme MauG catalyzes a six-electron oxidation that is required for the posttranslational modification of a precursor of methylamine dehydrogenase (preMADH) to complete the biosynthesis of its protein-derived cofactor, tryptophan tryptophylquinone (TTQ). Crystallographic and computational studies have implicated Gln103 in stabilizing the Fe^IV=O moiety of the bis-Fe^IV state by hydrogen bonding. The role of Gln103 was probed by site-directed mutagenesis. Q103L and Q103E mutations resulted in no expression and very little expression of the protein, respectively. Q103A MauG exhibited oxidative damage when isolated. Q103N MauG was isolated at levels comparable to that of wild-type MauG and exhibited normal activity in catalyzing the biosynthesis of TTQ from preMADH. The crystal structure of the Q103N MauG–preMADH complex suggests that a water may mediate hydrogen bonding between the shorter Asn103 side chain and the Fe^IV=O moiety. The Q103N mutation caused the two redox potentials associated with the diferric/diferrous redox couple to become less negative, although the redox cooperativity of the hemes of MauG was retained. Upon addition of H₂O₂, Q103N MauG exhibits changes in the absorbance spectrum in the Soret and near-IR regions consistent with formation of the bis-Fe^IV redox state. However, the rate of spontaneous return of the spectrum in the Soret region was 4.5-fold greater for Q103N MauG than for wild-type MauG. In contrast, the rate of spontaneous decay of the absorbance at 950 nm, which is associated with charge-resonance stabilization of the high-valence state, was similar for wild-type MauG and Q103N MauG. This suggests that as a consequence of the mutation a different distribution of resonance structures stabilizes the bis-Fe^IV state. These results demonstrate that subtle changes in the structure of the side chain of residue 103 can significantly affect the overall protein stability of MauG and alter the redox properties of the hemes.

MauG, a diheme enzyme that catalyzes tryptophan tryptophylquinone biosynthesis by remote catalysis

MauG contains two c-type hemes with atypical physical and catalytic properties. While most c-type cytochromes function simply as electron transfer mediators, MauG catalyzes the completion of tryptophan tryptophylquinone (TTQ)(1) biosynthesis within a precursor protein of methylamine dehydrogenase. This posttranslational modification is a six-electron oxidation that requires crosslinking of two Trp residues, oxygenation of a Trp residue and oxidation of the resulting quinol to TTQ. These reactions proceed via a bis-Fe(IV) state in which one heme is present as Fe(IV)O and the other is Fe(IV) with axial heme ligands provided by His and Tyr side chains. Catalysis does not involve direct contact between the protein substrate and either heme of MauG. Instead it is accomplished by remote catalysis using a hole hopping mechanism of electron transfer in which Trp residues of MauG are reversibly oxidized. In this process, long range electron transfer is coupled to the radical mediated chemical reactions that are required for TTQ biosynthesis.

Mutation of Trp(93) of MauG to tyrosine causes loss of bound Ca(2+) and alters the kinetic mechanism of tryptophan tryptophylquinone cofactor biosynthesis

The dihaem enzyme MauG catalyses a six-electron oxidation required for post-translational modification of preMADH (precursor of methylamine dehydrogenase) to complete the biosynthesis of its TTQ (tryptophan tryptophylquinone) cofactor. Trp93 of MauG is positioned midway between its two haems, and in close proximity to a Ca2+ that is critical for MauG function. Mutation of Trp93 to tyrosine caused loss of bound Ca2+ and changes in spectral features similar to those observed after removal of Ca2+ from WT (wild-type) MauG. However, whereas Ca2+-depleted WT MauG is inactive, W93Y MauG exhibited TTQ biosynthesis activity. The rate of TTQ biosynthesis from preMADH was much lower than that of WT MauG and exhibited highly unusual kinetic behaviour. The steady-state reaction exhibited a long lag phase, the duration of which was dependent on the concentration of preMADH. The accumulation of reaction intermediates, including a diradical species of preMADH and quinol MADH (methylamine dehydrogenase), was detected during this pre-steady-state phase. In contrast, steady-state oxidation of quinol MADH to TTQ, the final step of TTQ biosynthesis, exhibited no lag phase. A kinetic model is presented to explain the long pre-steady-state phase of the reaction of W93Y MauG, and the role of this conserved tryptophan residue in MauG and related dihaem enzymes is discussed.

Posttranslational biosynthesis of the protein-derived cofactor tryptophan tryptophylquinone

Methylamine dehydrogenase (MADH) catalyzes the oxidative deamination of methylamine to formaldehyde and ammonia. Tryptophan tryptophylquinone (TTQ) is the protein-derived cofactor of MADH required for this catalytic activity. TTQ is biosynthesized through the posttranslational modification of two tryptophan residues within MADH, during which the indole rings of two tryptophan side chains are cross-linked and two oxygen atoms are inserted into one of the indole rings. MauG is a c-type diheme enzyme that catalyzes the final three reactions in TTQ formation. In total, this is a six-electron oxidation process requiring three cycles of MauG-dependent two-electron oxidation events using either H2O2 or O2. The MauG redox form responsible for the catalytic activity is an unprecedented bis-Fe(IV) species. The amino acids of MADH that are modified are ≈ 40 Å from the site where MauG binds oxygen, and the reaction proceeds by a hole hopping electron transfer mechanism. This review addresses these highly unusual aspects of the long-range catalytic reaction mediated by MauG.

Carboxyl group of Glu113 is required for stabilization of the diferrous and bis-Fe(IV) states of MauG

The diheme enzyme MauG catalyzes a six-electron oxidation required for post-translational modification of a precursor of methylamine dehydrogenase (preMADH) to complete the biosynthesis of its protein-derived tryptophan tryptophylquinone (TTQ) cofactor. Crystallographic studies have implicated Glu113 in the formation of the bis-Fe(IV) state of MauG, in which one heme is Fe(IV)═O and the other is Fe(IV) with His-Tyr axial ligation. An E113Q mutation had no effect on the structure of MauG but significantly altered its redox properties. E113Q MauG could not be converted to the diferrous state by reduction with dithionite but was only reduced to a mixed valence Fe(II)/Fe(III) state, which is never observed in wild-type (WT) MauG. Addition of H2O2 to E113Q MauG generated a high valence state that formed more slowly and was less stable than the bis-Fe(IV) state of WT MauG. E113Q MauG exhibited no detectable TTQ biosynthesis activity in a steady-state assay with preMADH as the substrate. It did catalyze the steady-state oxidation of quinol MADH to the quinone, but 1000-fold less efficiently than WT MauG. Addition of H2O2 to a crystal of the E113Q MauG-preMADH complex resulted in partial synthesis of TTQ. Extended exposure of these crystals to H2O2 resulted in hydroxylation of Pro107 in the distal pocket of the high-spin heme. It is concluded that the loss of the carboxylic group of Glu113 disrupts the redox cooperativity between hemes that allows rapid formation of the diferrous state and alters the distribution of high-valence species that participate in charge-resonance stabilization of the bis-Fe(IV) redox state.

Structure of the processive rubber oxygenase RoxA from Xanthomonas sp

Rubber oxygenase A (RoxA) is one of only two known enzymes able to catalyze the oxidative cleavage of latex for biodegradation. RoxA acts as a processive dioxygenase to yield the predominant product 12-oxo-4,8-dimethyl-trideca-4,8-diene-1-al (ODTD), a tri-isoprene unit. Here we present a structural analysis of RoxA from Xanthomonas sp. strain 35Y at a resolution of 1.8 Å. The enzyme is a 75-kDa diheme c-type cytochrome with an unusually low degree of secondary structure. Analysis of the heme group arrangement and peptide chain topology of RoxA confirmed a distant kinship with diheme peroxidases of the CcpA family, but the proteins are functionally distinct, and the extracellular RoxA has evolved to have twice the molecular mass by successively accumulating extensions of peripheral loops. RoxA incorporates both oxygen atoms of its cosubstrate dioxygen into the rubber cleavage product ODTD, and we show that RoxA is isolated with O2 stably bound to the active site heme iron. Activation and cleavage of O2 require binding of polyisoprene, and thus the substrate needs to use hydrophobic access channels to reach the deeply buried active site of RoxA. The location and nature of these channels support a processive mechanism of latex cleavage.

Tryptophan-mediated charge-resonance stabilization in the bis-Fe(IV) redox state of MauG

The diheme enzyme MauG catalyzes posttranslational modifications of a methylamine dehydrogenase precursor protein to generate a tryptophan tryptophylquinone cofactor. The MauG-catalyzed reaction proceeds via a bis-Fe(IV) intermediate in which one heme is present as Fe(IV)=O and the other as Fe(IV) with axial histidine and tyrosine ligation. Herein, a unique near-infrared absorption feature exhibited specifically in bis-Fe(IV) MauG is described, and evidence is presented that it results from a charge-resonance-transition phenomenon. As the two hemes are physically separated by 14.5 Å, a hole-hopping mechanism is proposed in which a tryptophan residue located between the hemes is reversibly oxidized and reduced to increase the effective electronic coupling element and enhance the rate of reversible electron transfer between the hemes in bis-Fe(IV) MauG. Analysis of the MauG structure reveals that electron transfer via this mechanism is rapid enough to enable a charge-resonance stabilization of the bis-Fe(IV) state without direct contact between the hemes. The finding of the charge-resonance-transition phenomenon explains why the bis-Fe(IV) intermediate is stabilized in MauG and does not permanently oxidize its own aromatic residues.

A Trp199Glu MauG variant reveals a role for Trp199 interactions with pre-methylamine dehydrogenase during tryptophan tryptophylquinone biosynthesis

MauG catalyzes posttranslational modifications of a methylamine dehydrogenase precursor (preMADH) to complete the biosynthesis of its protein-derived tryptophan tryptophylquinone (TTQ) cofactor. Trp199 is present at the site of interaction between MauG and preMADH and is critical to this process as it mediates hole hopping during the inter-protein electron transfer that is required for catalysis. Trp199 was converted to Glu and the structure and reactivity of the W199E/preMADH complex were characterized. The results reveal that the nature of residue 199 is also important for productive complex formation between preMADH and MauG.

MauG: a di-heme enzyme required for methylamine dehydrogenase maturation

Methylamine dehydrogenase (MADH) requires the cofactor tryptophan tryptophylquinone (TTQ) for activity. TTQ is a posttranslational modification that results from an 8-electron oxidation of two specific tryptophans in the MADH β-subunit. The final 6-electron oxidation is catalyzed by an unusual c-type di-heme enzyme, MauG. The di-ferric enzyme can react with H(2)O(2), but atypically for c-type hemes the di-ferrous enzyme can react with O(2) as well. In both cases, an unprecedented bis-Fe(IV) redox state is formed, composed of a ferryl heme (Fe(IV)=O) with the second heme as Fe(IV) stabilized by His-Tyr axial ligation. Bis-Fe(IV) MauG acts as a potent 2-electron oxidant. Catalysis is long-range and requires a hole hopping electron transfer mechanism. This review highlights the current knowledge and focus of research into this fascinating system.

Effects of the loss of the axial tyrosine ligand of the low-spin heme of MauG on its physical properties and reactivity

MauG catalyzes posttranslational modifications of methylamine dehydrogenase to complete the biosynthesis of its protein-derived tryptophan tryptophylquinone (TTQ) cofactor. MauG possesses a five-coordinate high-spin and a six-coordinate low-spin ferric heme, the latter with His-Tyr ligation. Replacement of this tyrosine with lysine generates a MauG variant with only high-spin ferric heme and altered spectroscopic and redox properties. Y294K MauG cannot stabilize the bis-Fe(IV) redox state required for TTQ biosynthesis but instead forms a compound I-like species on reaction with peroxide. The results clarify the role of Tyr ligation of the five-coordinate heme in determining the physical and redox properties and reactivity of MauG.

Geometric and electronic structures of the His-Fe(IV)=O and His-Fe(IV)-Tyr hemes of MauG

Biosynthesis of the tryptophan tryptophylquinone (TTQ) cofactor activates the enzyme methylamine dehydrogenase. The diheme enzyme MauG catalyzes O-atom insertion and cross-linking of two Trp residues to complete TTQ synthesis. Solution optical and Mössbauer spectroscopic studies have indicated that the reactive form of MauG during turnover is an unusual bisFe(IV) intermediate, which has been formulated as a His-ligated ferryl heme [Fe(IV)=O] (heme A), and an Fe(IV) heme with an atypical His/Tyr ligation (heme B). In this study, Fe K-edge X-ray absorption spectroscopy and extended X-ray absorption fine structure studies have been combined with density functional theory (DFT) and time-dependent DFT methods to solve the geometric and electronic structures of each heme site in the MauG bisFe(IV) redox state. The ferryl heme site (heme A) is compared with the well-characterized compound I intermediate of cytochrome c peroxidase. Heme B is unprecedented in biology, and is shown to have a six-coordinate, S = 1 environment, with a short (1.85-Å) Fe-O(Tyr) bond. Experimentally calibrated DFT calculations are used to reveal a strong covalent interaction between the Fe and the O(Tyr) ligand of heme B in the high-valence form. A large change in the Fe-O(Tyr) bond distance on going from Fe(II) (2.02 Å) to Fe(III) (1.89 Å) to Fe(IV) (1.85 Å) signifies increasing localization of spin density on the tyrosinate ligand upon sequential oxidation of heme B to Fe(IV). As such, O(Tyr) plays an active role in attaining and stabilizing the MauG bisFe(IV) redox state.

Characterization of electron tunneling and hole hopping reactions between different forms of MauG and methylamine dehydrogenase within a natural protein complex

Respiration, photosynthesis, and metabolism require the transfer of electrons through and between proteins over relatively long distances. It is critical that this electron transfer (ET) occur with specificity to avoid cellular damage, and at a rate that is sufficient to support the biological activity. A multistep hole hopping mechanism could, in principle, enhance the efficiency of long-range ET through proteins as it does in organic semiconductors. To explore this possibility, two different ET reactions that occur over the same distance within the protein complex of the diheme enzyme MauG and different forms of methylamine dehydrogenase (MADH) were subjected to kinetic and thermodynamic analysis. An ET mechanism of single-step direct electron tunneling from diferrous MauG to the quinone form of MADH is consistent with the data. In contrast, the biosynthetic ET from preMADH, which contains incompletely synthesized tryptophan tryptophylquinone, to the bis-Fe(IV) form of MauG is best described by a two-step hole hopping mechanism. Experimentally determined ET distances matched the distances determined from the crystal structure that would be expected for single-step tunneling and multistep hopping. Experimentally determined relative values of electronic coupling (H(AB)) for the two reactions correlated well with the relative H(AB) values predicted from computational analysis of the structure. The rate of the hopping-mediated ET reaction is also 10-fold greater than that of the single-step tunneling reaction despite a smaller overall driving force for the hopping-mediated ET reaction. These data provide insight into how the intervening protein matrix and redox potentials of the electron donor and acceptor determine whether the ET reaction proceeds via single-step tunneling or multistep hopping.

Significant reduction in errors associated with nonbonded contacts in protein crystal structures: automated all-atom refinement with PrimeX

All-atom models are essential for many applications in molecular modeling and computational chemistry. Nonbonded atomic contacts much closer than the sum of the van der Waals radii of the two atoms (clashes) are commonly observed in such models derived from protein crystal structures. A set of 94 recently deposited protein structures in the resolution range 1.5-2.8 Å were analyzed for clashes by the addition of all H atoms to the models followed by optimization and energy minimization of the positions of just these H atoms. The results were compared with the same set of structures after automated all-atom refinement with PrimeX and with nonbonded contacts in protein crystal structures at a resolution equal to or better than 0.9 Å. The additional PrimeX refinement produced structures with reasonable summary geometric statistics and similar R(free) values to the original structures. The frequency of clashes at less than 0.8 times the sum of van der Waals radii was reduced over fourfold compared with that found in the original structures, to a level approaching that found in the ultrahigh-resolution structures. Moreover, severe clashes at less than or equal to 0.7 times the sum of atomic radii were reduced 15-fold. All-atom refinement with PrimeX produced improved crystal structure models with respect to nonbonded contacts and yielded changes in structural details that dramatically impacted on the interpretation of some protein-ligand interactions.

Electron hopping through proteins

Biological redox machines require efficient transfer of electrons and holes for function. Reactions involving multiple tunneling steps, termed "hopping," often promote charge separation within and between proteins that is essential for energy storage and conversion. Here we show how semiclassical electron transfer theory can be extended to include hopping reactions: graphical representations (called hopping maps) of the dependence of calculated two-step reaction rate constants on driving force are employed to account for flow in a rhenium-labeled azurin mutant as well as in two structurally characterized redox enzymes, DNA photolyase and MauG. Analysis of the 35 Å radical propagation in ribonucleotide reductases using hopping maps shows that all tyrosines and tryptophans on the radical pathway likely are involved in function. We suggest that hopping maps can facilitate the design and construction of artificial photosynthetic systems for the production of fuels and other chemicals.

Cofactor biosynthesis through protein post-translational modification

Post-translational modifications of amino acids can be used to generate novel cofactors capable of chemistries inaccessible to conventional amino acid side chains. The biosynthesis of these sites often requires one or more enzyme or protein accessory factors, the functions of which are quite diverse and often difficult to isolate in cases where multiple enzymes are involved. Herein is described the current knowledge of the biosynthesis of urease and nitrile hydratase metal centers, pyrroloquinoline quinone, hypusine, and tryptophan tryptophylquinone cofactors along with the most recent work elucidating the functions of individual accessory factors in these systems. These examples showcase the breadth and diversity of this continually expanding field.

Role of calcium in metalloenzymes: effects of calcium removal on the axial ligation geometry and magnetic properties of the catalytic diheme center in MauG

MauG is a diheme enzyme possessing a five-coordinate high-spin heme with an axial His ligand and a six-coordinate low-spin heme with His-Tyr axial ligation. A Ca(2+) ion is linked to the two hemes via hydrogen bond networks, and the enzyme activity depends on its presence. Removal of Ca(2+) altered the electron paramagnetic resonance (EPR) signals of each ferric heme such that the intensity of the high-spin heme was decreased and the low-spin heme was significantly broadened. Addition of Ca(2+) back to the sample restored the original EPR signals and enzyme activity. The molecular basis for this Ca(2+)-dependent behavior was studied by magnetic resonance and Mössbauer spectroscopy. The results show that in the Ca(2+)-depleted MauG the high-spin heme was converted to a low-spin heme and the original low-spin heme exhibited a change in the relative orientations of its two axial ligands. The properties of these two hemes are each different than those of the heme in native MauG and are now similar to each other. The EPR spectrum of Ca(2+)-free MauG appears to describe one set of low-spin ferric heme signals with a large g(max) and g anisotropy and a greatly altered spin relaxation property. Both EPR and Mössbauer spectroscopic results show that the two hemes are present as unusual highly rhombic low-spin hemes in Ca(2+)-depleted MauG, with a smaller orientation angle between the two axial ligand planes. These findings provide insight into the correlation of enzyme activity with the orientation of axial heme ligands and describe a role for the calcium ion in maintaining this structural orientation that is required for activity.

Proline 107 is a major determinant in maintaining the structure of the distal pocket and reactivity of the high-spin heme of MauG

The diheme enzyme MauG catalyzes a six-electron oxidation required for posttranslational modification of a precursor of methylamine dehydrogenase (preMADH) to complete the biosynthesis of its protein-derived tryptophan tryptophylquinone (TTQ) cofactor. Crystallographic studies had shown that Pro107, which resides in the distal pocket of the high-spin heme of MauG, changes conformation upon binding of CO or NO to the heme iron. In this study, Pro107 was converted to Cys, Val, and Ser by site-directed mutagenesis. The structures of each of these MauG mutant proteins in complex with preMADH were determined, as were their physical and catalytic properties. P107C MauG was inactive, and the crystal structure revealed that Cys107 had been oxidatively modified to a sulfinic acid. Mass spectrometry revealed that this modification was present prior to crystallization. P107V MauG exhibited spectroscopic and catalytic properties that were similar to those of wild-type MauG, but P107V MauG was more susceptible to oxidative damage. The P107S mutation caused a structural change that resulted in the five-coordinate high-spin heme being converted to a six-coordinate heme with a distal axial ligand provided by Glu113. EPR and resonance Raman spectroscopy revealed this heme remained high-spin but with greatly increased rhombicity as compared to that of the axial signal of wild-type MauG. P107S MauG was resistant to reduction by dithionite and reaction with H(2)O(2) and unable to catalyze TTQ biosynthesis. These results show that the presence of Pro107 is critical in maintaining the proper structure of the distal heme pocket of the high-spin heme of MauG, allowing exogenous ligands to bind and directing the reactivity of the heme-activated oxygen during catalysis, thus minimizing the oxidation of other residues of MauG.

Tryptophan tryptophylquinone biosynthesis: a radical approach to posttranslational modification

Protein-derived cofactors are formed by irreversible covalent posttranslational modification of amino acid residues. An example is tryptophan tryptophylquinone (TTQ) found in the enzyme methylamine dehydrogenase (MADH). TTQ biosynthesis requires the cross-linking of the indole rings of two Trp residues and the insertion of two oxygen atoms onto adjacent carbons of one of the indole rings. The diheme enzyme MauG catalyzes the completion of TTQ within a precursor protein of MADH. The preMADH substrate contains a single hydroxyl group on one of the tryptophans and no crosslink. MauG catalyzes a six-electron oxidation that completes TTQ assembly and generates fully active MADH. These oxidation reactions proceed via a high valent bis-Fe(IV) state in which one heme is present as Fe(IV)=O and the other is Fe(IV) with both axial heme ligands provided by amino acid side chains. The crystal structure of MauG in complex with preMADH revealed that catalysis does not involve direct contact between the hemes of MauG and the protein substrate. Rather it is accomplished through long-range electron transfer, which presumably generates radical intermediates. Kinetic, spectrophotometric, and site-directed mutagenesis studies are beginning to elucidate how the MauG protein controls the reactivity of the hemes and mediates the long range electron/radical transfer required for catalysis. This article is part of a Special Issue entitled: Radical SAM enzymes and Radical Enzymology.

Crystal structures of CO and NO adducts of MauG in complex with pre-methylamine dehydrogenase: implications for the mechanism of dioxygen activation

MauG is a diheme enzyme responsible for the post-translational formation of the catalytic tryptophan tryptophylquinone (TTQ) cofactor in methylamine dehydrogenase (MADH). MauG can utilize hydrogen peroxide, or molecular oxygen and reducing equivalents, to complete this reaction via a catalytic bis-Fe(IV) intermediate. Crystal structures of diferrous, Fe(II)-CO, and Fe(II)-NO forms of MauG in complex with its preMADH substrate have been determined and compared to one another as well as to the structure of the resting diferric MauG-preMADH complex. CO and NO each bind exclusively to the 5-coordinate high-spin heme with no change in ligation of the 6-coordinate low-spin heme. These structures reveal likely roles for amino acid residues in the distal pocket of the high-spin heme in oxygen binding and activation. Glu113 is implicated in the protonation of heme-bound diatomic oxygen intermediates in promoting cleavage of the O-O bond. Pro107 is shown to change conformation on the binding of each ligand and may play a steric role in oxygen activation by positioning the distal oxygen near Glu113. Gln103 is in a position to provide a hydrogen bond to the Fe(IV)═O moiety that may account for the unusual stability of this species in MauG.