High-resolution solution structure of basic fibroblast growth factor determined by multidimensional heteronuclear magnetic resonance spectroscopy

Structural and biochemical investigation into stable FGF2 mutants with novel mutation sites and hydrophobic replacements for surface-exposed cysteines

Fibroblast growth factor 2 (FGF2) is an attractive biomaterial for pharmaceuticals and functional cosmetics. To improve the thermo-stability of FGF2, we designed two mutants harboring four-point mutations: FGF2-M1 (D28E/C78L/C96I/S137P) and FGF2-M2 (D28E/C78I/C96I/S137P) through bioinformatics, molecular thermodynamics, and molecular modeling. The D28E mutation reduced fragmentation of the FGF2 wild type during preparation, and the substitution of a whale-specific amino acid, S137P, enhanced the thermal stability of FGF2. Surface-exposed cysteines that participate in oligomerization through intermolecular disulfide bond formation were substituted with hydrophobic residues (C78L/C78I and C96I) using the in silico method. High-resolution crystal structures revealed at the atomic level that the introduction of mutations stabilizes each local region by forming more favorable interactions with neighboring residues. In particular, P137 forms CH-π interactions with the side chain indole ring of W123, which seems to stabilize a β-hairpin structure, containing a heparin-binding site of FGF2. Compared to the wild type, both FGF2-M1 and FGF2-M2 maintained greater solubility after a week at 45 °C, with their Tm values rising by ~ 5 °C. Furthermore, the duration for FGF2-M1 and FGF2-M2 to reach 50% residual activity at 45 °C extended to 8.8- and 8.2-fold longer, respectively, than that of the wild type. Interestingly, the hydrophobic substitution of surface-exposed cysteine in both FGF2 mutants makes them more resistant to proteolytic cleavage by trypsin, subtilisin, proteinase K, and actinase than the wild type and the Cys → Ser substitution. The hydrophobic replacements can influence protease resistance as well as oligomerization and thermal stability. It is notable that hydrophobic substitutions of surface-exposed cysteines, as well as D28E and S137P of the FGF2 mutants, were designed through various approaches with structural implications. Therefore, the engineering strategies and structural insights adopted in this study could be applied to improve the stability of other proteins.

Fibroblast growth factor 2

Fibroblast Growth Factor 2 (FGF2), also known as basic fibroblast growth factor, is a potent stimulator of growth and differentiation in multiple tissues. Its discovery traces back over 50 years ago when it was first isolated from bovine pituitary extracts due to its ability to stimulate fibroblast proliferation. Subsequent studies investigating the genomic structure of FGF2 identified multiple protein isoforms, categorized as the low molecular weight and high molecular weight FGF2. These isoforms arise from alternative translation initiation events and exhibit unique molecular and cellular functions. In this concise review, we aim to provide an overview of what is currently known about the structure, expression, and functions of the FGF2 isoforms within the contexts of development, homeostasis, and disease.

Identification of a novel extracellular inhibitor of FGF2/FGFR signaling axis by combined virtual screening and NMR spectroscopy approach

The aberrant activation of the fibroblast growth factor 2 (FGF2)/fibroblast growth factor receptor (FGFR) signalling pathway drives severe pathologies, including cancer development and angiogenesis-driven pathologies. The perturbation of the FGF2/FGFR axis via extracellular allosteric small inhibitors is a promising strategy for developing FGFR inhibitors with improved safety and efficacy for cancer treatment. We have previously investigated the role of new extracellular inhibitors, such as rosmarinic acid (RA), which bind the FGFR-D2 domain and directly compete with FGF2 for the same binding site, enabling the disruption of the functional FGF2/FGFR interaction. To select ligands for the previously identified FGF2/FGFR RA binding site, NMR data-driven virtual screening has been performed on an in-house library of non-commercial small molecules and metabolites. A novel drug-like compound, a resorcinol derivative named RBA4 has been identified. NMR interaction studies demonstrate that RBA4 binds the FGF2/FGFR complex, in agreement with docking prediction. Residue-level NMR perturbations analysis highlights that the mode of action of RBA4 is similar to RA in terms of its ability to target the FGF2/FGFR-D2 complex, inducing perturbations on both proteins and triggering complex dissociation. Biological assays proved that RBA4 inhibited FGF2 proliferative activity at a level comparable to the previously reported natural product, RA. Identification of RBA4 chemical groups involved in direct interactions represents a starting point for further optimization of drug-like extracellular inhibitors with improved activity.

Inhibition of FGFR Signaling by Targeting FGF/FGFR Extracellular Interactions: Towards the Comprehension of the Molecular Mechanism through NMR Approaches

NMR-based approaches play a pivotal role in providing insight into molecular recognition mechanisms, affording the required atomic-level description and enabling the identification of promising inhibitors of protein–protein interactions. The aberrant activation of the fibroblast growth factor 2 (FGF2)/fibroblast growth factor receptor (FGFR) signaling pathway drives several pathologies, including cancer development, metastasis formation, resistance to therapy, angiogenesis-driven pathologies, vascular diseases, and viral infections. Most FGFR inhibitors targeting the intracellular ATP binding pocket of FGFR have adverse effects, such as limited specificity and relevant toxicity. A viable alternative is represented by targeting the FGF/FGFR extracellular interactions. We previously identified a few small-molecule inhibitors acting extracellularly, targeting FGFR or FGF. We have now built a small library of natural and synthetic molecules that potentially act as inhibitors of FGF2/FGFR interactions to improve our understanding of the molecular mechanisms of inhibitory activity. Here, we provide a comparative analysis of the interaction mode of small molecules with the FGF2/FGFR complex and the single protein domains. DOSY and residue-level NMR analysis afforded insights into the capability of the potential inhibitors to destabilize complex formation, highlighting different mechanisms of inhibition of FGF2-induced cell proliferation.

How the Ligand-Induced Reorganization of Protein Internal Energies Is Coupled to Conformational Events

Here, we introduce a novel computational method to identify the protein substructures most likely to support the functionally oriented structural deformations that occur upon ligand-binding. To this aim, we study the modulation of protein energetics along the trajectory of a molecular dynamics simulation of different proteins in the presence and in the absence of their respective ligands, namely, human FGF, human second PDZ from human PTP1E/PTPL1, and the N terminal domain of human Hsp90. The method is based on the idea that a subset of protein residues (hotspots) may initiate the global response via the disassembly and reassembly of interactions, which is reflected in the modulation of the overall protein energetics. To identify structural hotspots and dynamic states linked to the onset of functionally relevant conformational transitions, we define an energy profile to monitor the protein energetics, based on a previously introduced approach that highlights the essential nonbonded couplings among all residues. The energy profiles are calculated along the trajectory to yield a time-dependent evolution, and their relative population in the presence and absence of the ligand is evaluated by means of a clustering procedure. It is found that interconversion between clusters, as well as their population and the density of specific energy profiles in the vicinity of structural transitions, provides specific information on the impact of the ligand in driving the protein conformational response. This analysis also highlights the hotspot residues that are most responsive to the presence of the ligand. Importantly, identified hotspots are in agreement with experimental evidence in the three considered systems. We propose that this approach can be generally used in the prediction of "allosteric hotspots" and ligand-induced conformational responses, as well as to select conformations more likely to support functional transitions (e.g., in the framework of adaptive sampling approaches).

Binding efficiency of recombinant collagen-binding basic fibroblast growth factors (CBD-bFGFs) and their promotion for NIH-3T3 cell proliferation

The recombinant basic fibroblast growth factor (bFGF) containing collagen-binding domain (CBD) has been found to be a potential therapeutic factor in tissue regeneration. However, its binding efficiency and quantification remain uncertain. In this research, massive recombinant bFGFs with good bioactivity for enhancing the proliferation of NIH-3T3 cells were achieved. An ELISA-based quantitative method was set up to investigate the binding efficiency of CBD-bFGFs on collagen films. It indicated that the CBDs significantly increased the collagen-binding ability of bFGF (P < .05), with the optimum binding condition first determined to be in the pH range of 7.5-9.5 (P < .05). Then, the relevant equations to calculate the binding density of bFGF, C-bFGF, and V-bFGF were acquired. Analysis confirmed that the bioactivity of immobilized bFGFs was well correlated with the density of growth factor on collagen films. Based on this research, the density of growth factor is a logical and applicable dosage unit for quantification of binding efficiency of growth factors, rather than traditional concentration of soluble growth factors in tissue engineering applications.

Key steps in unconventional secretion of fibroblast growth factor 2 reconstituted with purified components

FGF2 is secreted from cells by an unconventional secretory pathway. This process is mediated by direct translocation across the plasma membrane. Here, we define the minimal molecular machinery required for FGF2 membrane translocation in a fully reconstituted inside-out vesicle system. FGF2 membrane translocation is thermodynamically driven by PI(4,5)P₂-induced membrane insertion of FGF2 oligomers. The latter serve as dynamic translocation intermediates of FGF2 with a subunit number in the range of 8-12 FGF2 molecules. Vectorial translocation of FGF2 across the membrane is governed by sequential and mutually exclusive interactions with PI(4,5)P₂ and heparan sulfates on opposing sides of the membrane. Based on atomistic molecular dynamics simulations, we propose a mechanism that drives PI(4,5)P₂ dependent oligomerization of FGF2. Our combined findings establish a novel type of self-sustained protein translocation across membranes revealing the molecular basis of the unconventional secretory pathway of FGF2.

DOI:http://dx.doi.org/10.7554/eLife.28985.001

Dimerization capacities of FGF2 purified with or without heparin-affinity chromatography

Fibroblast growth factor-2 (FGF2) is a pleiotropic growth factor exhibiting a variety of biological activities. In this article, we studied the capacity of FGF2 purified with or without heparin affinity chromatography to self-associate. Analyzing the NMR HSQC spectra for different FGF2 concentrations, heparin-affinity purified FGF2 showed perturbations that indicate dimerization and are a higher-order oligomerization state. HSQC perturbation observed with different FGF2 concentrations revealed a heparin-binding site and two dimer interfaces. Thus, with increasing protein concentrations, FGF2 monomers make contacts with each other and form dimers or higher order oligomers. On the contrary, FGF2 purified with ion-exchange chromatography did not show similar perturbation indicating that self-association of FGF2 is eliminated if purification is done without heparin-affinity chromatography. The HSQC spectra of heparin-affinity purified FGF2 can be reproduced to some extent by adding heparin tetra-saccharide to ion exchange chromatography purified FGF2. Heparin-affinity purified FGF2 bound to acceptor and donor beads in a tagged form using His-tagged or GST-tagged proteins, also dimerized in the AlphaScreen™ assay. This assay was further validated using different experimental conditions and competitors. The assay constitutes an interesting tool to study dimerization of other FGF forms as well.

Investigating the dynamic aspects of drug-protein recognition through a combination of MD and NMR analyses: implications for the development of protein-protein interaction inhibitors

In this paper, we investigate the dynamic aspects of the molecular recognition between a small molecule ligand and a flat, exposed protein surface, representing a typical target in the development of protein-protein interaction inhibitors. Specifically, we analyze the complex between the protein Fibroblast Growth Factor 2 (FGF2) and a recently discovered small molecule inhibitor, labeled sm27 for which the binding site and the residues mainly involved in small molecule recognition have been previously characterized. We have approached this problem using microsecond MD simulations and NMR-based characterizations of the dynamics of the apo and holo states of the system. Using direct combination and cross-validation of the results of the two techniques, we select the set of conformational states that best recapitulate the principal dynamic and structural properties of the complex. We then use this information to generate a multi-structure representation of the sm27-FGF2 interaction. We propose this kind of representation and approach as a useful tool in particular for the characterization of systems where the mutual dynamic influence between the interacting partners is expected to play an important role. The results presented can also be used to generate new rules for the rational expansion of the chemical diversity space of FGF2 inhibitors.

Structural insights into the interaction of human S100B and basic fibroblast growth factor (FGF2): Effects on FGFR1 receptor signaling

S100B is a calcium sensing protein belonging to the S100 protein family with intracellular and extracellular roles. It is one of the EF hand homodimeric proteins, which is known to interact with various protein targets to regulate varied biological functions. Extracellular S100B has been recently reported to interact with FGF2 in a RAGE-independent manner. However, the recognition mechanism of S100B-FGF2 interaction at the molecular level remains unclear. In this study, the critical residues on S100B-FGF2 interface were mapped by combined information derived from NMR spectroscopy and site directed mutagenesis experiments. Utilizing NMR titration data, we generated the structural models of S100B-FGF2 complex from the computational docking program, HADDOCK which were further proved stable during 15ns unrestrained molecular dynamics (MD) simulations. Isothermal titration calorimetry studies indicated S100B interaction with FGF2 is an entropically favored process implying dominant role of hydrophobic contacts at the protein-protein interface. Residue level information of S100B interaction with FGF2 was useful to understand the varied target recognition ability of S100B and further explained its role in effecting extracellular signaling diversity. Mechanistic insights into the S100B-FGF2 complex interface and cell-based assay studies involving mutants led us to conclude the novel role of S100B in FGF2 mediated FGFR1 receptor inactivation.

Multi-protein delivery by nanodiamonds promotes bone formation

Bone morphogenetic proteins (BMPs) are well-studied regulators of cartilage and bone development that have been Food and Drug Administration (FDA)-approved for the promotion of bone formation in certain procedures. BMPs are seeing more use in oral and maxillofacial surgeries because of recent FDA approval of InFUSE(®) for sinus augmentation and localized alveolar ridge augmentation. However, the utility of BMPs in medical and dental applications is limited by the delivery method. Currently, BMPs are delivered to the surgical site by the implantation of bulky collagen sponges. Here we evaluate the potential of detonation nanodiamonds (NDs) as a delivery vehicle for BMP-2 and basic fibroblast growth factor (bFGF). Nanodiamonds are biocompatible, 4- to 5-nm carbon nanoparticles that have previously been used to deliver a wide variety of molecules, including proteins and peptides. We find that both BMP-2 and bFGF are readily loaded onto NDs by physisorption, forming a stable colloidal solution, and are triggered to release in slightly acidic conditions. Simultaneous delivery of BMP-2 and bFGF by ND induces differentiation and proliferation in osteoblast progenitor cells. Overall, we find that NDs provide an effective injectable alternative for the delivery of BMP-2 and bFGF to promote bone formation.

Interactions between exogenous FGF-2 and sulfonic groups: in situ characterization and impact on the morphology of human adipose-derived stem cells

FGF-2 is often used as a supplement to stem cells culture medium aiming at preserving their self-renewal capacity and plasticity through the passages. However, little is known on the influence of the underlying substrate in these interactions. In this study, we have used mixed self-assembled monolayers with different ratios of -SO3H and -OH tail groups to investigate the influence of substrate properties (e.g., charge) on the FGF-2 adsorption and activity. QCM-D data demonstrated that, in the presence of -OH groups, the quantity of the adsorbed FGF-2 is proportional to the percentage of surface -SO3H groups. The bioactivity of the adsorbed FGF-2 follows the same tendency as demonstrated by its interactions with anti-FGF-2. Surprisingly, the adlayer of FGF-2 formed on the surface containing only SO3H-tailed SAMs was similar to the surface with 25% of -SO3H groups, demonstrating that FGF-2 adsorption is not solely driven by electrostatic interactions. We related these results with changes in the morphology of adipose-derived stem cells (ASCs) cultured on the same surfaces.

Diversification of the structural determinants of fibroblast growth factor-heparin interactions: implications for binding specificity

The functions of a large number (>435) of extracellular regulatory proteins are controlled by their interactions with heparan sulfate (HS). In the case of fibroblast growth factors (FGFs), HS binding determines their transport between cells and is required for the assembly of high affinity signaling complexes with their cognate FGF receptor. However, the specificity of the interaction of FGFs with HS is still debated. Here, we use a panel of FGFs (FGF-1, FGF-2, FGF-7, FGF-9, FGF-18, and FGF-21) spanning five FGF subfamilies to probe their specificities for HS at different levels as follows: binding parameters, identification of heparin-binding sites (HBSs) in the FGFs, changes in their secondary structure caused by heparin binding and structures in the sugar required for binding. For interaction with heparin, the FGFs exhibit K(D) values varying between 38 nM (FGF-18) and 620 nM (FGF-9) and association rate constants spanning over 20-fold (FGF-1, 2,900,000 M(-1) s(-1) and FGF-9, 130,000 M(-1) s(-1)). The canonical HBS in FGF-1, FGF-2, FGF-7, FGF-9, and FGF-18 differs in its size, and these FGFs have a different complement of secondary HBS, ranging from none (FGF-9) to two (FGF-1). Differential scanning fluorimetry identified clear preferences in these FGFs for distinct structural features in the polysaccharide. These data suggest that the differences in heparin-binding sites in both the protein and the sugar are greatest between subfamilies and may be more restricted within a FGF subfamily in accord with the known conservation of function within FGF subfamilies.

Direct and allosteric inhibition of the FGF2/HSPGs/FGFR1 ternary complex formation by an antiangiogenic, thrombospondin-1-mimic small molecule

Fibroblast growth factors (FGFs) are recognized targets for the development of therapies against angiogenesis-driven diseases, including cancer. The formation of a ternary complex with the transmembrane tyrosine kinase receptors (FGFRs), and heparan sulphate proteoglycans (HSPGs) is required for FGF2 pro-angiogenic activity. Here by using a combination of techniques including Nuclear Magnetic Resonance, Molecular Dynamics, Surface Plasmon Resonance and cell-based binding assays we clarify the molecular mechanism of inhibition of an angiostatic small molecule, sm27, mimicking the endogenous inhibitor of angiogenesis, thrombospondin-1. NMR and MD data demonstrate that sm27 engages the heparin-binding site of FGF2 and induces long-range dynamics perturbations along FGF2/FGFR1 interface regions. The functional consequence of the inhibitor binding is an impaired FGF2 interaction with both its receptors, as demonstrated by SPR and cell-based binding assays. We propose that sm27 antiangiogenic activity is based on a twofold-direct and allosteric-mechanism, inhibiting FGF2 binding to both its receptors.

Dual-targeting non-viral vector based on polyethylenimine improves gene transfer efficiency

Polyethylenimine (PEI) is the polymer most commonly used for transferring plasmids into eukaryotes, but its gene-transfer efficiency is lower compared to viral vectors. Receptors targeting PEI combined with ligands can enhance efficiency of gene transfer into the corresponding receptor-positive cells. Using the double-receptor-mediated pathway of viral infection, in this study we synthesized a novel non-viral vector based on PEI combined with two peptides recognizing FGF receptors (peptide YC25) and integrins (peptide CP9) on the cell surface. The dual targeting vector showed a physicochemical character similar to that of PEI, such as pDNA formation, particle size, zeta potential and lower toxicity. In vitro gene transfer showed that the dual-receptor targeted vector (YC25-PEI-CP9) exhibited a markedly higher transgene efficiency in cell lines with positive expression of FGF receptors and integrins, compared with single-peptide-modified PEI or unmodified PEI. In the cells with only integrin-positive expression, YC25-PEI-CP9 mediated a higher transgene expression than PEI but lower than CP9-PEI. The corresponding free peptides could inhibit the transgene efficiency of the peptide-coupled PEI. In vivo gene transfer in tumor-bearing nude mice also demonstrated that the dual-targeting vectors showed a significantly enhanced transfection efficiency in tumors with positive expression of FGF receptors and integrins. The synthesized polymer YC25-PEI-CP9 has the prospect to act as a novel kind of non-viral vector in gene therapy.

Molecular modeling of the interaction between heparan sulfate and cellular growth factors: bringing pieces together

Heparan sulfate is a polysaccharide belonging to the glycaminoglycan family. It interacts with numerous proteins of the extracellular matrix, in particular cellular growth factors. The number of experimental protein-heparin sulfate complexes obtained by crystallography or nuclear magnetic resonance is limited. Alternatively, computational approaches can be employed. Generally, they restrain the conformation of the glycosidic rings and linkages in order to reduce the complexity of the problem. Modeling the interaction between protein and heparan sulfate is indeed challenging because of the large size of the fragment needed for a strong binding, the flexibility brought by the glycosidic rings and linkages and the high density of negative charges. We propose a two-step method based on molecular docking and molecular dynamics simulation. Molecular docking allows exploring the positioning of a rigid heparin sulfate fragment on the protein surface. Molecular dynamics refine selected docking models by explicitly representing solvent molecules and not restraining the polysaccharide backbone. The interaction of a hexamer of heparin sulfate was studied in interaction with fibroblast growth factor 2 and stromal cell-derived factor 1α. This approach shed light on the plasticity of the growth factors interacting with heparan sulfate. This approach can be extended to the study of other protein/glycosaminoglycan complexes.

Biological functions of the low and high molecular weight protein isoforms of fibroblast growth factor-2 in cardiovascular development and disease

Fibroblast growth factor 2 (FGF2) consists of multiple protein isoforms (low molecular weight, LMW, and high molecular weight, HMW) produced by alternative translation from the Fgf2 gene. These protein isoforms are localized to different cellular compartments, indicating unique biological activity. FGF2 isoforms in the heart have distinct roles in many pathological circumstances in the heart including cardiac hypertrophy, ischemia-reperfusion injury, and atherosclerosis. These studies suggest distinct biological activities of FGF2 LMW and HMW isoforms both in vitro and in vivo. Yet, due to the limitations that only the recombinant FGF2 LMW isoform is readily available and that the FGF2 antibody is nonspecific with regards to its isoforms, much remains to be determined regarding the role(s) of the FGF2 LMW and HMW isoforms in cellular behavior and in cardiovascular development and pathophysiology. This review summarizes the activities of LMW and HMW isoforms of FGF2 in cardiovascular development and disease.

Vascularization and cellularization of collagen scaffolds incorporated with two different collagen-targeting human basic fibroblast growth factors

To develop a collagen-based wound targeting repair system, we introduced two collagen-binding domains (CBDs) into the human basic fibroblast growth factor (bFGF). Three expression vectors were constructed: the first one (named V-bFGF) contained bFGF and the CBD WREPSFCALS derived from von Willeband's factor (vWF); the second (named C-bFGF) contained bFGF and the CBD TKKTLRT derived from collagenase; the third (named bFGF) was bFGF as a control. The recombinant proteins of V-bFGF and C-bFGF were demonstrated to retain both growth factor activity and collagen-binding activity. We found that C-bFGF possessed higher collagen-binding ability than V-bFGF. The targeted repair systems consisting of collagen scaffolds and CBD-bFGFs were assembled in vitro and then implanted subcutaneously. Results showed that C-bFGF promoted vascularization at the implanted sites more effectively than V-bFGF. Histological analysis showed more cells migrated into collagen scaffolds incorporated with C-bFGF than those with V-bFGF. These data suggested that the higher collagen-binding ability the CBD-bFGF possessed, the more significant vascularization, and cellularization were observed. In summary, CBD-bFGF/collagen system could be used as a targeted repair system with beneficial effects of the restriction of bFGF diffusion, the prolonging of bFGF activity, and the targeted promotion of vascularization and cellularization.

Solution NMR structure of a human FGF-1 monomer, activated by a hexasaccharide heparin-analogue

The 3D structure of a complex formed by the acidic fibroblast growth factor (FGF-1) and a specifically designed synthetic heparin hexasaccharide has been determined by NMR spectroscopy. This hexasaccharide can substitute natural heparins in FGF-1 mitogenesis assays, in spite of not inducing any apparent dimerization of the growth factor. The use of this well defined synthetic heparin analogue has allowed us to perform a detailed NMR structural analysis of the heparin-FGF interaction, overcoming the limitations of NMR to deal with the high molecular mass and heterogeneity of the FGF-1 oligomers formed in the presence of natural heparin fragments. Our results confirm that glycosaminoglycans induced FGF-1 dimerization either in a cis or trans disposition with respect to the heparin chain is not an absolute requirement for biological activity.

A topology-constrained distance network algorithm for protein structure determination from NOESY data

This article formulates the multidimensional nuclear Overhauser effect spectroscopy (NOESY) interpretation problem using graph theory and presents a novel, bottom-up, topology-constrained distance network analysis algorithm for NOESY cross peak interpretation using assigned resonances. AutoStructure is a software suite that implements this topology-constrained distance network analysis algorithm and iteratively generates structures using the three-dimensional (3D) protein structure calculation programs XPLOR/CNS or DYANA. The minimum input for AutoStructure includes the amino acid sequence, a list of resonance assignments, and lists of 2D, 3D, and/or 4D-NOESY cross peaks. AutoStructure can also analyze homodimeric proteins when X-filtered NOESY experiments are available. The quality of input data and final 3D structures is evaluated using recall, precision, and F-measure (RPF) scores, a statistical measure of goodness of fit with the input data. AutoStructure has been tested on three protein NMR data sets for which high-quality structures have previously been solved by an expert, and yields comparable high-quality distance constraint lists and 3D protein structures in hours. We also compare several protein structures determined using AutoStructure with corresponding homologous proteins determined with other independent methods. The program has been used in more than two dozen protein structure determinations, several of which have already been published.

Xylosyltransferase I acceptor properties of fibroblast growth factor and its fragment bFGF (1-24)

Human basic fibroblast growth factor (bFGF) is a heparin-binding growth factor containing a G-S-G-motif which is a potential recognition sequence of xylosyltransferase I (XT-I). Here, we show that the recombinant human bFGF was xylosylated in vitro by human XT-I and that the fragment bFGF (1-24) is a good XT-I acceptor (K(m) = 20.8 microM for native XT-I and K(m) = 22.3 microM for recombinant XT-I). MALDI and MALDI-PSD time-of-flight mass spectrometric analyses of the xylosylated bFGF protein demonstrate the transfer of xylose to the serine residue of the G-S-G-motif in the amino terminal end of bFGF. The peptide bFGF (1-24) is well suitable as an acceptor substrate for XT-I and can be used in a radiochemical assay to measure the XT-I activity in cell culture supernatant and human body fluids, respectively. Furthermore, we could demonstrate that the XT-I interacts strongly with heparin and that this glycosaminoglycan is a predominantly non-competitive inhibitor of the enzyme using the fragment bFGF (1-24) as xylose acceptor.

Fibroblast growth factor-2(23) binds directly to the survival of motoneuron protein and is associated with small nuclear RNAs

The SMN (survival of motoneuron) protein is mutated in patients with the neurodegenerative disease spinal muscular atrophy. We have shown previously that a high-molecular-mass isoform of FGF (fibroblast growth factor) 2 (FGF-2(23)) is in a complex with SMN [Claus, Doring, Gringel, Muller-Ostermeyer, Fuhlrott, Kraft and Grothe (2003) J. Biol. Chem. 278, 479-485]. FGF-2 is a neurotrophic factor for motoneurons, and is known not only as a classical extracellular growth factor, but also as a nuclear protein. In the present study, we demonstrate that SMN binds to the arginine-rich N-terminus of FGF-2(23). In turn, FGF-2(23) interacts with amino acid residues 1-90 of the human SMN protein. This sequence displays nucleic-acid-binding capacity and overlaps partially with known binding sites for Gemin2/SIP1 (SMN-interacting protein 1) and p53. Finally, as a functional consequence of FGF-2(23) binding to SMN, FGF-2(23) is in a complex with the small nuclear RNAs U2 and U4. Since SMN functions as an assembly factor for snRNPs (small nuclear ribonucleoprotein particles), these results suggest binding of FGF-2(23) to snRNPs.

An integrated platform for automated analysis of protein NMR structures

Recent developments provide automated analysis of NMR assignments and three-dimensional (3D) structures of proteins. These approaches are generally applicable to proteins ranging from about 50 to 150 amino acids. In this chapter, we summarize progress by the Northeast Structural Genomics Consortium in standardizing the NMR data collection process for protein structure determination and in building an integrated platform for automated protein NMR structure analysis. Our integrated platform includes the following principal steps: (1) standardized NMR data collection, (2) standardized data processing (including spectral referencing and Fourier transformation), (3) automated peak picking and peak list editing, (4) automated analysis of resonance assignments, (5) automated analysis of NOESY data together with 3D structure determination, and (6) methods for protein structure validation. In particular, the software AutoStructure for automated NOESY data analysis is described in this chapter, together with a discussion of practical considerations for its use in high-throughput structure production efforts. The critical area of data quality assessment has evolved significantly over the past few years and involves evaluation of both intermediate and final peak lists, resonance assignments, and structural information derived from the NMR data. Methods for quality control of each of the major automated analysis steps in our platform are also discussed. Despite significant remaining challenges, when good quality data are available, automated analysis of protein NMR assignments and structures with this platform is both fast and reliable.

Heparin-binding domains in vascular biology

Heparin is a major anticoagulant with activity mediated primarily through its interaction with antithrombin (AT). Heparan sulfate (HS), structurally related to heparin, binds a wide range of proteins of different functionality, taking part in various physiological and pathological processes. The heparin-AT complex, the most well understood facet of anticoagulation, serves as a prototypical example of the important role of heparin/HS in vascular biology. Extensive studies have identified common structural features in heparin/HS-binding sites of proteins. These include the elucidation of consensus sequences in proteins, patterns of clusters of basic and nonbasic residues, and common spatial arrangements of basic amino acids in the heparin-binding sites. Although these studies have provided valuable information, heparin/HS-binding proteins differ widely in structure. The prediction of heparin/HS-binding proteins from sequence information is not currently possible, and elucidation of protein-binding sites requires the individual study of each glycosaminoglycan-protein complex. Thus, x-ray crystallography and site-directed mutagenesis experiments are among the most powerful tools, providing accurate structural information, facilitating the characterization of heparin-protein complexes. Heparin and structurally related heparan sulfate bind a large number of proteins, taking part in a wide range of biological processes, particularly ones involved in vascular biology. Heparin-binding domains share certain common structural features, but there is no absolute dependency on specific sequences or protein folds.

Probing fibroblast growth factor dimerization and role of heparin-like glycosaminoglycans in modulating dimerization and signaling

For a number of growth factors and cytokines, ligand dimerization is believed to be central to the formation of an active signaling complex. In the case of fibroblast growth factor-2 (FGF2) signaling, heparin/heparan sulfate-like glycosaminoglycans (HLGAGs) are involved through interaction with both FGF2 and its receptors (FGFRs) in assembling a tertiary complex and modulating FGF2 activity. Biochemical data have suggested different modes of HLGAG-induced FGF2 dimerization involving specific protein-protein contacts. In addition, several recent x-ray crystallography studies of FGF.FGFR and FGF.FGFR.HLGAG complexes have revealed other modes of molecular assemblage, with no FGF-FGF contacts. All these different biochemical and structural findings have clarified less and in fact raised more questions as to which mode of FGF2 dimerization, if any, is essential for signaling. In this study, we address the issue of FGF2 dimerization in signaling using a combination of biochemical, biophysical, and site-directed mutagenesis approaches. Our findings presented here provide direct evidence of FGF2 dimerization in mediating FGF2 signaling.

High-resolution solution structure of the catalytic fragment of human collagenase-3 (MMP-13) complexed with a hydroxamic acid inhibitor

The high-resolution solution structure of the catalytic fragment of human collagenase-3 (MMP-13) complexed with a sulfonamide derivative of a hydroxamic acid compound (WAY-151693) has been determined by multidimensional heteronuclear NMR. A total of 30 structures were calculated for residues 7-164 by means of hybrid distance geometry-simulated annealing using a total of 3280 experimental NMR restraints. The atomic rms distribution about the mean coordinate positions for the 30 structures is 0.43(+/-0.05) A for the backbone atoms, 0.80(+/-0.09) A for all atoms, and 0.47(+/-0.04) A for all atoms excluding disordered side-chains. The overall structure of MMP-13 is composed of a beta-sheet consisting of five beta-strands in a mixed parallel and anti-parallel arrangement and three alpha-helices where its overall fold is consistent with previously solved MMP structures. A comparison of the NMR structure of MMP-13 with the published 1.6 A resolution X-ray structure indicates that the major differences between the structures is associated with loop dynamics and crystal-packing interactions. The side-chains of some active-site residues for the NMR and X-ray structures of MMP-13 adopt distinct conformations. This is attributed to the presence of unique inhibitors in the two structures that encounter distinct interactions with MMP-13. The major structural difference observed between the MMP-13 and MMP-1 NMR structures is the relative size and shape of the S1' pocket where this pocket is significantly longer for MMP-13, nearly reaching the surface of the protein. Additionally, MMP-1 and MMP-13 exhibit different dynamic properties for the active-site loop and the structural Zn-binding region. The inhibitor WAY-151693 is well defined in the MMP-13 active-site based on a total of 52 distance restraints. The binding motif of WAY-151693 in the MMP-13 complex is consistent with our previously reported MMP-1:CGS-27023A NMR structure and is similar to the MMP-13: RS-130830 X-ray structure.

Analysis by NMR spectroscopy of the structural homology between the linear and the cyclic peptide recognized by anti-human leukocyte antigen class I monoclonal antibody TP25.99*

The anti-human leukocyte antigen (HLA) class I monoclonal antibody (mAb) TP25.99 has a unique specificity since it recognizes both a conformational and a linear determinant expressed on the beta(2)-mu-associated and beta(2)-mu-free HLA class I heavy chains, respectively. Previously, we reported the identification of a cyclic and a linear peptide that inhibits mAb TP25.99 binding to the beta(2)-mu-associated and beta(2)-mu-free HLA class I heavy chains (S. A. Desai, X. Wang, E. J. Noronha, Q. Zhou, V. Rebmann, H. Grosse-Wilde, F. J. Moy, R. Powers, and S. Ferrone, submitted for publication). The linear X(19) and cyclic LX-8 peptides contain sequence homologous to residues 239-242, 245, and 246 and to residues 194-198, respectively, of HLA class I heavy chain alpha(3) domain. Analysis by two-dimensional transfer nuclear Overhauser effect spectroscopy of the induced solution structures of the linear X(19) and cyclic LX-8 peptides in the presence of mAb TP25.99 showed that the two peptides adopt a similar structural motif despite the lack of sequence homology. The backbone fold is suggestive of a short helical segment followed by a tight turn, reminiscent of the determinant loop region (residues 194-198) on beta(2)-mu-associated HLA class I heavy chains. The structural similarity between the linear X(19) and cyclic LX-8 peptides and the lack of sequence homology suggests that mAb TP25.99 predominantly recognizes a structural motif instead of a consensus sequence.

High throughput protein fold identification by using experimental constraints derived from intramolecular cross-links and mass spectrometry

We have used intramolecular cross-linking, MS, and sequence threading to rapidly identify the fold of a model protein, bovine basic fibroblast growth factor (FGF)-2. Its tertiary structure was probed with a lysine-specific cross-linking agent, bis(sulfosuccinimidyl) suberate (BS(3)). Sites of cross-linking were determined by tryptic peptide mapping by using time-of-flight MS. Eighteen unique intramolecular lysine (Lys-Lys) cross-links were identified. The assignments for eight cross-linked peptides were confirmed by using post source decay MS. The interatomic distance constraints were all consistent with the tertiary structure of FGF-2. These relatively few constraints, in conjunction with threading, correctly identified FGF-2 as a member of the beta-trefoil fold family. To further demonstrate utility, we used the top-scoring homolog, IL-1beta, to build an FGF-2 homology model with a backbone error of 4.8 A (rms deviation). This method is fast, is general, uses small amounts of material, and is amenable to automation.

Fibroblast growth factor-2

Fibroblast growth factor-2 (FGF-2) is a heparin-binding growth factor which occurs in several isoforms resulting from alternative initiations of translation: an 18 kD cytoplasmic isoform and four larger molecular weight nuclear isoforms (22, 22.5, 24 and 34 kD). FGF-2 has pleiotropic roles in many cell types and tissues; it is a motogenic, angiogenic and survival factor which is involved in cell migration, cell differentiation and in a variety of developmental processes. Although devoid of signal peptide, it could be secreted. It acts mainly through a paracrine/autocrine mechanism involving high affinity transmembrane receptors and heparan sulfate proteoglycan low affinity receptors, but also through still unknown intracrine process(es) on intracellular targets. FGF-2 has many biological functions which are probably isoform-specific. Nevertheless, FGF-2 is not essential for embryonic development as knock-out mice for the growth factor are viable and fertile although they exhibit abnormalities in neuronal differentiation. Use of FGF-2 as therapeutic agent for the treatment of ischemic cardiovascular disease is promising and clinical trials are in progress.

Mass spectral characterization of a protein-nucleic acid photocrosslink

A photocrosslink between basic fibroblast growth factor (bFGF155) and a high affinity ssDNA oligonucleotide was characterized by positive ion electrospray ionization mass spectrometry (ESIMS). The DNA was a 61-mer oligonucleotide photoaptamer bearing seven bromodeoxyuridines, identified by in vitro selection. Specific photocrosslinking of the protein to the oligonucleotide was achieved by 308 nm XeCl excimer laser excitation. The cross-linked protein nucleic acid complex was proteolyzed with trypsin. The resulting peptide crosslink was purified by PAGE, eluted, and digested by snake venom phosphodiesterase/alkaline phosphatase. Comparison of the oligonucleotide vs. the degraded peptide crosslink by high performance liquid chromatography coupled to an electrospray ionization triple quadrupole mass spectrometer showed a single ion unique to the crosslinked material. Sequencing by collision induced dissociation (MS/MS) on a triple quadrupole mass spectrometer revealed that this ion was the nonapeptide TGQYKLGSK (residues 130-138) crosslinked to a dinucleotide at Tyr133. The MS/MS spectrum indicated sequential fragmentation of the oligonucleotide to uracil covalently attached to the nonapeptide followed by fragmentation of the peptide bonds. Tyr133 is located within the heparin binding pocket, suggesting that the in vitro selection targeted this negative ion binding region of bFGF155.

Inhibition of cell growth by a fused protein of human ribonuclease 1 and human basic fibroblast growth factor

Pancreatic-type RNases are considered to have cytotoxic potential due to their ability to degrade RNA molecules when they enter the cytosol. However, most of these RNases show little cytotoxicity because cells have no active uptake mechanism for these RNases and because the ubiquitous cytoplasmic RNase inhibitor is considered to play a protective role against the endocytotic leak of RNases from the outside of cells. To study the cytotoxic potential of RNase toward malignant cells targeting growth factor receptors, the C-terminus of human RNase 1 was fused to the N-terminus of human basic fibroblast growth factor (bFGF). This RNase-FGF fused protein effectively inhibited the growth of mouse melanoma cell line B16/BL6 with high levels of cell surface FGF receptor. This effect appeared to result from prolongation of the overall cell cycle rather than the killing of cells or specific arrest in a particular phase of the cell cycle. Thus, human RNase 1 fused to a ligand of cell surface molecules, such as the FGF receptor, is shown to be an effective candidate for a selective cell targeting agent with low toxic effects on normal cell types.

Automated analysis of NMR assignments and structures for proteins

Recent developments in protein NMR technology have provided spectral data that are highly amenable to analysis by advanced computer software systems. Specific data collection strategies, coupled with these computer programs, allow automated analysis of extensive backbone and sidechain resonance assignments and three-dimensional structures for proteins of 50 to 200 amino acids.

Heparan sulfate mediates bFGF transport through basement membrane by diffusion with rapid reversible binding

Basic fibroblast growth factor (bFGF) is a pluripotent cytokine with a wide range of target cells. Heparan sulfate binds bFGF, and this interaction has been demonstrated to protect bFGF against physical denaturation and protease degradation. The high concentrations of heparan sulfate in basement membranes have implicated these matrices as storage sites for bFGF in vivo. However, the mechanisms by which basement membranes modulate bFGF storage and release is unknown. To gain insight into these mechanisms, we have developed experimental and mathematical models of extracellular growth factor transport through basement membrane. Intact Descemet's membranes isolated from bovine corneas were mounted within customized diffusion cells and growth factor transport was measured under a variety of conditions that decoupled the diffusion process from the heparan sulfate binding phenomenon. Transport experiments were conducted with bFGF and interleukin 1beta. In addition, bFGF-heparan sulfate binding was disrupted in diffusion studies with high ionic strength buffer and buffers containing protamine sulfate. Transport of bFGF was enhanced dramatically when heparan sulfate binding was inhibited. This process was modeled as a problem of diffusion with fast reversible binding. Experimental parameters were incorporated into a mathematical model and independent simulations were run that showed that the experimental data were accurately predicted by the mathematical model. Thus, this study indicated that basement membranes function as dynamic regulators of growth factor transport, allowing for rapid response to changing environmental conditions. The fundamental principles controlling bFGF transport through basement membrane that have been identified here might have applications in understanding how growth factor distribution is regulated throughout an organism during development and in the adult state.

Diversity does make a difference: fibroblast growth factor-heparin interactions

Fibroblast growth factors (FGFs) are members of a protein family with a broad range of biological activities. The best characterized FGFs interact with two distinct extracellular receptors--a transmembrane tyrosine kinase FGF receptor (FGFR) and a heparan f1p4ate-related proteoglycan of the extracellular matrix. These components form a FGF-FGFR-proteoglycan complex that activates the FGF-mediated signal transduction process through FGFR dimerization. Recent crystal structure determinations of FGF-heparin complexes have provided insights into both the interactions between these components and the role of heparin-like proteoglycans in FGF function. Future advances in this field will benefit enormously from an ability to specifically prepare homogeneous heparin-based oligosaccharides of defined sequence for use in biochemical and structural studies of FGF and many other systems.

Correlation between the 1.6 A crystal structure and mutational analysis of keratinocyte growth factor

A comprehensive deletion, mutational, and structural analysis of the native recombinant keratinocyte growth factor (KGF) polypeptide has resulted in the identification of the amino acids responsible for its biological activity. One of these KGF mutants (delta23KGF-R144Q) has biological activity comparable to the native protein, and its crystal structure was determined by the multiple isomorphous replacement plus anomalous scattering method (MIRAS). The structure of KGF reveals that it folds into a beta-trefoil motif similar to other members of fibroblast growth factor (FGF) family whose structures have been resolved. This fold consists of 12 anti-parallel beta-strands in which three pairs of the strands form a six-stranded beta-barrel structure and the other three pairs of beta-strands cap the barrel with hairpin triplets forming a triangular array. KGF has 10 well-defined beta strands, which form five double-stranded anti-parallel beta-sheets. A sixth poorly defined beta-strand pair is in the loop between residues 133 and 144, and is defined by only a single hydrogen bond between the two strands. The KGF mutant has 10 additional ordered amino terminus residues (24-33) compared to the other FGF structures, which are important for biological activity. Based on mutagenesis, thermal stability, and structural data we postulate that residues TRP125, THR126, and His127 predominantly confer receptor binding specificity to KGF. Additionally, residues GLN152, GLN138, and THR42 are implicated in heparin binding. The increased thermal stability of delta23KGF-R144Q can structurally be explained by the additional formation of hydrogen bonds between the GLN side chain and a main-chain carbonyl on an adjoining loop. The correlation of the structure and biochemistry of KGF provides a framework for a rational design of this potentially important human therapeutic.

Glycosaminoglycans can influence fibroblast growth factor-2 mitogenicity without significant growth factor binding

Fibroblast growth factors are important heparin binding, mitogenic proteins. The binding site in heparin and heparan sulfate for fibroblast growth factor-2 (basic fibroblast growth factor) has been described as rich in glucosamine-2-sulfate 1-->4 linked to iduronic acid-2-sulfate. The glucosamine residue in the heparin binding site is also 6-sulfated. A new glycosaminoglycan, acharan sulfate, has been chemically modified to prepare a polysaccharide, N-sulfoacharan sulfate, consisting of glucosamine-2-sulfate 1-->4 linked to iduronic acid-2-sulfate. Acharan sulfate binds very weakly to fibroblast growth factor-2 while N-sulfoacharan sulfate binds with nearly the same affinity as heparin. Mitogenicity studies were performed using heparan sulfate-free cells stably transfected with fibroblast growth factor receptor-1. Acharan sulfate inhibits heparin's enhancement of fibroblast growth factor-2 mitogenic activity, without affecting cell viability, while N-sulfoacharan sulfate shows heparin-like activity but at a greatly reduced level. These results suggest additional mechanisms not requiring high affinity glycosaminoglycan binding to fibroblast growth factor-2 may be important in its mitogenic activity.