Conformation and thermal denaturation of apocalmodulin: role of electrostatic mutations

Bionanofactory for green synthesis of collagen nanoparticles, characterization, optimization, in-vitro and in-vivo anticancer activities

Collagen nanoparticles (collagen-NPs) are promising biological polymer nanoparticles due to their exceptional biodegradability and biocompatibility. Collagen-NPs were bio-fabricated from pure marine collagen using the cell-free supernatant of a newly isolated strain, Streptomyces sp. strain NEAA-3. Streptomyces sp. strain NEAA-3 was identified as Streptomyces plicatus strain NEAA-3 based on its cultural, morphological, physiological properties and 16S rRNA sequence analysis. The sequence data has been deposited under accession number OR501412.1 in the GenBank database. The face-centered central composite design (FCCD) was used to improve collagen-NPs biosynthesis. The maximum yield of collagen-NPs was 9.33 mg/mL with a collagen concentration of 10 mg/mL, an initial pH of 7, an incubation time of 72 h, and a temperature of 35 °C. Using the desirability function approach, the collagen-NPs biosynthesis obtained after FCCD optimization (9.53 mg/mL) was 3.92 times more than the collagen-NPs biosynthesis obtained before optimization process (2.43 mg/mL). The TEM analysis of collagen-NPs revealed hollow sphere nanoscale particles with an average diameter of 33.15 ± 10.02 nm. FTIR spectra confirmed the functional groups of the collagen, collagen-NPs and the cell-free supernatant that are essential for the efficient capping of collagen-NPs. The biosynthesized collagen-NPs exhibited antioxidant activity and anticancer activity against HeP-G2, MCF-7 and HCT116 cell lines. Collagen-NPs assessed as an effective drug loading carrier with methotrexate (MTX), a chemotherapeutic agent. The TEM analysis revealed that the average size of MTX-loaded collagen-NPs was 35.4 ± 8.9 nm. The percentages of drug loading (DL%) and encapsulation efficiency (EE%) were respectively 22.67 and 45.81%.

Intrinsically disordered protein domain of human ameloblastin in synthetic fusion with calmodulin increases calmodulin stability and modulates its function

Constantly increasing attention to bioengineered proteins has led to the rapid development of new functional targets. Here we present the biophysical and functional characteristics of the newly designed CaM/AMBN-Ct fusion protein. The two-domain artificial target consists of calmodulin (CaM) and ameloblastin C-terminus (AMBN-Ct). CaM as a well-characterized calcium ions (Ca²⁺) binding protein offers plenty of options in terms of Ca²⁺ detection in biomedicine and biotechnologies. Highly negatively charged AMBN-Ct belongs to intrinsically disordered proteins (IDPs). CaM/AMBN-Ct was designed to open new ways of communication synergies between the domains with potential functional improvement. The character and function of CaM/AMBN-Ct were explored by biophysical and molecular modelling methods. Experimental studies have revealed increased stability and preserved CaM/AMBN-Ct function. The results of molecular dynamic simulations (MDs) outlined different interface patterns between the domains with potential allosteric communication within the fusion.

Comparison of ligand binding and conformational stability of human calmodulin with its homolog from the malaria parasite Plasmodium falciparum

Calmodulin (CaM), the key calcium sensor of eukaryotic cells regulating a great number of target proteins, belongs to the most conserved proteins. We compared function and properties of CaMs from two evolutionarily distant species, the human (Homo sapiens) representing vertebrates, and the malaria parasite Plasmodium falciparum (Pf). The biophysical characterization revealed higher stability of Pf CaM attributed to the more stable C-terminal domain in both Ca2+ free and saturated states. In vitro binding and functional assays demonstrated that human and Pf CaM exhibit similar biochemical features involving small molecule inhibitor binding and target enzyme activation as illustrated by comparable affinities differing only within a factor of three. It has been reported that CaM antagonists proved to be antimalarials, so Pf CaM could be a potential target to combat malaria parasites. Indeed, we observed that phenotypically active compounds from the Malaria Box could show inhibitory action on Pf CaM, among them the most potent exhibited comparable inhibition to known antagonists of vertebrate CaM. However, based on the minor binding differences in Pf CaM to human CaM, we conclude that CaM is an unsuited target for human intervention against malaria, due to the likely interference with the host protein.

Binding of Nox5's EF-Hand domain to the peptides corresponding to the phosphorylatable region and regulatory inhibitory loop in its dehydrogenase domain

Reactive oxygen species (ROS) produced by NADPH oxidase 5 (Nox5) are regulated by Ca2+ flux through the interactions of its self-contained EF-hand domain (EFD), dehydrogenase domain (DH), and transmembrane domain. Studies suggest that the regulatory EF-hand binding domain (REFBD) and phosphorylatable (PhosR) sequences within DH play an important role in Nox5's superoxide-generating activity. However, the interplay of the EFD-DH interaction is largely unclear. Here, we used two synthetic peptides corresponding to the putative REFBD and PhosR sequences, as well as DH construct proteins, and separately studied their binding to EFD by fluorescence spectroscopy and calorimetry. With mutagenesis, we revealed that the C-terminal half domain of EFD binds specifically to REFBD in a Ca2+-dependent manner, which is driven primarily by hydrophobic interactions to form a more compact structure. On the other hand, the interaction between EFD and PhosR is not Ca2+-dependent and is primarily dominated by electrostatic interactions. The binding constants (Ka) for both peptides to EFD were calculated to be in the range of 105 M-1. The formation of the binary complex EFD/REFBD and ternary complex EFD/REFBD/PhosR was demonstrated by fluorescence resonance energy transfer (FRET). However, EFD binding to PhosR appears to be not biologically important while the conformational change on its C-terminal half domain resembles a major factor in EFD-DH domain-domain interactions.

Electrochemical detection of DNA mismatches using a branch-shaped hierarchical SWNT-DNA nano-hybrid bioelectrode

Common approaches for DNA mutation detection are high cost and have difficult or complex procedure. We propose a fast quantitative method for recognition of DNA mutation based on SWNT/DNA self-assembled nanostructure. Covalent SWNT/DNA hybrid nanostructures are widely used in the fabrication of electrochemical biosensors. Interfacing carbon nanotubes with DNA in particular, is used as a detection method for the analysis of genetic disorders or the detection of mismatches in DNA hybridisation. We have designed a self-assembled, branch-shaped hybrid nanostructure by hybridisation of two sticky oligos that are attached to the ends of SWNTs via a linker oligo. These hybrid nanostructures showed a good conductivity that was greater than free SWNTs. Impedance spectroscopy studies illustrated that the conductivity of these hybrid nanostructures depended on the conformation and structure of the hybridised DNA. We demonstrated that the strategy of using SWNT/DNA self-assembled hybrid nanostructure fabrication yields sensitive and selective tools to discriminate mismatches in DNA. Cyclic voltammetry (CV) and impedance spectroscopy clearly revealed that the conductivity of the branch-shaped and hierarchical hybridised SWNT/DNA nanostructure is higher when matched, than when mismatched in a 1 and 1' hybridised SWNT/DNA nanostructure. Rapid biosensing of match and mismatch nanostructure based on carbon printed electrode showed similar results which can be used for rapid and fast detection of DNA mismatch.

Site I Inactivation Impacts Calmodulin Calcium Binding and Activation of Bordetella pertussis Adenylate Cyclase Toxin

Site I inactivation of calmodulin (CaM) was used to examine the importance of aspartic acid 22 at position 3 in CaM calcium binding, protein folding, and activation of the Bordetella pertussis adenylate cyclase toxin domain (CyaA-ACD). NMR calcium titration experiments showed that site I in the CaM mutant (D22A) remained largely unperturbed, while sites II, III, and IV exhibited calcium-induced conformational changes similar to wild-type CaM (CaMWt). Circular dichroism analyses revealed that D22A had comparable α-helical content to CaMWt, and only modest differences in α-helical composition were detected between CaMWt-CyaA-ACD and D22A-CyaA-ACD complexes. However, the thermal stability of the D22A-CyaA-ACD complex was reduced, as compared to the CaMWt-CyaA-ACD complex. Moreover, CaM-dependent activity of CyaA-ACD decreased 87% in the presence of D22A. Taken together, our findings provide evidence that D22A engages CyaA-ACD, likely through C-terminal mediated binding, and that site I inactivation exerts functional effects through the modification of stabilizing interactions that occur between N-terminal CaM and CyaA-ACD.

A cryptophane-based "turn-on" 129Xe NMR biosensor for monitoring calmodulin

We present the first cryptophane-based "turn-on" 129Xe NMR biosensor, employing a peptide-functionalized cryptophane to monitor the activation of calmodulin (CaM) protein in solution. In the absence of CaM binding, interaction between the peptide and cryptophane completely suppresses the hyperpolarized 129Xe-cryptophane NMR signal. Biosensor binding to Ca2+-activated CaM produces the expected 129Xe-cryptophane NMR signal.

Biochemical characterization of the bacterial peroxidase from the human pathogen Neisseria gonorrhoeae

Neisseria gonorrhoeae is an obligate human pathogen that expresses an array of molecular systems to detoxify reactive oxygen species as defense mechanisms during colonization and infection. One of these is the bacterial peroxidase that reduces H₂O₂ to water in its periplasm. The soluble form of this enzyme was heterologously expressed in E. coli in the holo-form binding two c-types hemes, a high-potential E heme and a low-potential P heme, with redox potentials of (+310mV) and (-190mV/-300mV), respectively in the presence of calcium ions, at pH7.5. Visible and EPR spectroscopic analysis together with activity assays indicate the presence of a calcium dependent reductive activation mechanism in thgonorrhoeaeNeisseria gonorrhoeae bacterial peroxidase, in which P heme is bis-His coordinated low-spin in the fully oxidized state of the enzyme, and becomes penta-coordinated high-spin upon reduction of E heme in the presence of calcium ions. The activated enzyme has a high affinity for H₂O₂ (K_M of 4±1μM), with maximum activity being attained at pH7.0 and 37°C, with the rate-limiting step in the catalytic cycle being the electron transfer between the two hemes. In this enzyme, dimer formation is not promoted at high ionic strength, thus differing from the classical bacterial peroxidases. These results contribute to the understanding of the involvement of Neisseria gonorrhoeae bacterial peroxidase has a first line defense mechanism against exogenously produced hydrogen peroxide in the host environment.

The effects of thioamide backbone substitution on protein stability: a study in α-helical, β-sheet, and polyproline II helical contexts

Thioamides are single atom substitutions of the peptide bond that serve as versatile probes of protein structure. Effective use of thioamides requires a robust understanding of the impact that the substitution has on a protein of interest. However, the thermodynamic effects of thioamide incorporation have only been studied in small structural motifs, and their influence on secondary structure in the context of full-length proteins is not known. Here we describe a comprehensive survey of thioamide substitutions in three benchmark protein systems (calmodulin, the B1 domain of protein G, and collagen) featuring the most prevalent secondary structure motifs: α-helix, β-sheet, and polyproline type II helix. We find that in most cases, effects on thermostability can be understood in terms of the positioning and local environment of the thioamide relative to proximal structural elements and hydrogen bonding networks. These observations set the stage for the rational design of thioamide substituted proteins with predictable stabilities.

Characterization of phospho-(tyrosine)-mimetic calmodulin mutants

Calmodulin (CaM) phosphorylated at different serine/threonine and tyrosine residues is known to exert differential regulatory effects on a variety of CaM-binding enzymes as compared to non-phosphorylated CaM. In this report we describe the preparation and characterization of a series of phospho-(Y)-mimetic CaM mutants in which either one or the two tyrosine residues present in CaM (Y99 and Y138) were substituted to aspartic acid or glutamic acid. It was expected that the negative charge of the respective carboxyl group of these amino acids mimics the negative charge of phosphate and reproduce the effects that distinct phospho-(Y)-CaM species may have on target proteins. We describe some physicochemical properties of these CaM mutants as compared to wild type CaM, after their expression in Escherichia coli and purification to homogeneity, including: i) changes in their electrophoretic mobility in the absence and presence of Ca2+; ii) ultraviolet (UV) light absorption spectra, far- and near-UV circular dichroism data; iii) thermal stability in the absence and presence of Ca2+; and iv) Tb3+-emitted fluorescence upon tyrosine excitation. We also describe some biochemical properties of these CaM mutants, such as their differential phosphorylation by the tyrosine kinase c-Src, and their action as compared to wild type CaM, on the activity of two CaM-dependent enzymes: cyclic nucleotide phosphodiesterase 1 (PDE1) and endothelial nitric oxide synthase (eNOS) assayed in vitro.

Structural plasticity of calmodulin on the surface of CaF2 nanoparticles preserves its biological function

Nanoparticles are increasingly used in biomedical applications and are especially attractive as biocompatible and biodegradable protein delivery systems. Herein, the interaction between biocompatible 25 nm CaF2 nanoparticles and the ubiquitous calcium sensor calmodulin has been investigated in order to assess the potential of these particles to serve as suitable surface protein carriers. Calmodulin is a multifunctional messenger protein that activates a wide variety of signaling pathways in eukaryotic cells by changing its conformation in a calcium-dependent manner. Isothermal titration calorimetry and circular dichroism studies have shown that the interaction between calmodulin and CaF2 nanoparticles occurs with physiologically relevant affinity and that the binding process is fully reversible, occurring without significant alterations in protein secondary and tertiary structures. Experiments performed with a mutant form of calmodulin having an impaired Ca(2+)-binding ability in the C-terminal lobe suggest that the EF-hand Ca(2+)-binding motifs are directly involved in the binding of calmodulin to the CaF2 matrix. The residual capability of nanoparticle-bound calmodulin to function as a calcium sensor protein, binding to and altering the activity of a target protein, was successfully probed by biochemical assays. Even if efficiently carried by CaF2 nanoparticles, calmodulin may dissociate, thus retaining the ability to bind the peptide encompassing the putative C-terminal calmodulin-binding domain of glutamate decarboxylase and activate the enzyme. We conclude that the high flexibility and structural plasticity of calmodulin are responsible for the preservation of its function when bound in high amounts to a nanoparticle surface.

A general framework improving teaching ligand binding to a macromolecule

The interaction of a ligand with a macromolecule has been modeled following different theories. The tenants of the induced fit model consider that upon ligand binding, the protein-ligand complex undergoes a conformational change. In contrast, the allosteric model assumes that only one among different coexisting conformers of a given protein is suitable to bind the ligand optimally. In the present paper, we propose a general framework to model the binding of ligands to a macromolecule. Such framework built on the binding polynomial allows opening new ways to teach in a unified manner ligand binding, enzymology and receptor binding in pharmacology. Moreover, we have developed simple software that allows building the binding polynomial from the schematic description of the biological system under study. Taking calmodulin as a canonical example, we show here that the proposed tool allows the easy retrieval of previously experimental and computational reports. This article is part of a Special Issue entitled: Calcium Signaling in Health and Disease. Guest Editors: Geert Bultynck, Jacques Haiech, Claus W. Heizmann, Joachim Krebs, and Marc Moreau.

Calcium-dependent conformational transition of calmodulin determined by Fourier transform infrared spectroscopy

The Ca(2+)-induced conformational changes in calmodulin (CaM) were monitored by Fourier transform infrared spectroscopy (FT-IR) at different molar ratios of Ca(2+) to CaM. The results show that these changes occur in two distinctive transitions. The first transition involves significant changes in the overall secondary structure with a small gain in solvent accessibility, and is completed after the second Ca(2+) binds to both EF-hands of its C-terminal domain. The second transition is accompanied by CaM folding into a tighter, less hydrogen-exchangeable structure, and is completed by the addition of the fourth Ca(2+) to have four Ca(2+) per molecule. Particularly, α-helices in CaM-nCa(2+)(n=0, 1, 2) are less stable than those in CaM-nCa(2+)(n=3, 4).

Use of SANS and biophysical techniques to reveal subtle conformational differences between native apo-calmodulin and its unfolded states

Apo-calmodulin, a small, mainly α, soluble protein is a calcium-dependent protein activator. It is made of two N- and C-terminal domains having a sequence homology of 70%, an identical folding but different stabilities, and is thus an interesting system for unfolding studies. The use of small angle neutron scattering (SANS) and other biophysical techniques has permitted to reveal conformational difference between native and thermal denatured states of apo-calmodulin. The results show that secondary and tertiary structures of apo-calmodulin evolve in a synchronous way, indicating the absence in the unfolding pathway of molten-globule state sufficiently stable to affect transition curves. From SANS experiments, at 85 °C, apo-calmodulin adopts a polymer chain conformation with some residual local structures. After cooling down, apo-calmodulin recovers a compact state, with a secondary structure close to the native one but with a higher radius of gyration and a different tyrosine environment. In fact on a timescale of few minutes, heat denaturation of apo-calmodulin is partially reversible, but on a time scale of hours (for SANS experiments), the long exposure to heat may lead to a non-reversibility due to some chemical perturbation of the protein. In fact, from Mass Spectrometry measurements, we got evidence of dehydration and deamidation of heated apo-calmodulin.

Spectroscopic characterization of furosemide binding to human carbonic anhydrase II

This study reports the interaction between furosemide and human carbonic anhydrase II (hCA II) using fluorescence, UV-vis and circular dichroism (CD) spectroscopy. Fluorescence data indicated that furosemide quenches the intrinsic fluorescence of the enzyme via a static mechanism and hydrogen bonding and van der Walls interactions play the major role in the drug binding. The binding average distance between furosemide and hCA II was estimated on the basis of the theory of Förster energy transfer. Decrease of protein surface hydrophobicity was also documented upon furosemide binding. Chemical modification of hCA II using N-bromosuccinimide indicated decrease of the number of accessible tryptophans in the presence of furosemide. CD results suggested the occurance of some alterations in α-helical content as well as tertiary structure of hCA II upon drug binding.

A study on the self assembly of Fe(II) and dual binding of Ni(II) porphyrazines on CT-DNA

Interaction of N , N ′, N ″, N ‴-tetramethyltetra-2,3-pyridinoporphyrazinatonickel(II), ([ Ni (2,3- tmtppa )]4+) and N , N ′, N ″, N ‴-tetramethyltetra-2,3-pyridinoporphyrazinatoiron(II), ([ Fe (2,3- tmtppa )]4+) with calf thymus DNA (CT-DNA) have been studied in 1mM phosphate buffer and low ionic strength (5 mM NaCl ) using several spectroscopic techniques: absorbance, fluorescence and circular dichroism. The 2:1 porphyrazine/DNA mole ratio, existence of moderate hypochromicity, moderate and progressive red shift and conservative ICD in the visible part of [ Fe (2,3- tmtppa )]4+ spectra suggested an outside binding with self-stacking mode. Analysis of the dramatic hypochromicity, small blue shift and bisignate ICD in the Q-band absorption region of [ Ni (2,3- tmtppa )]4+ spectra and 1:1 porphyrazine/DNA mole ratio possibly led us to the dual binding mode of this complex, i.e. at the minor and major grooves of DNA. The influence of the ionic strength on the porphyrazine-DNA binding confirmed this suggestion. The fluorescence quenching of DNA-ethidium bromide complex by porphyrazines was investigated. The values of quenching constants ( K sv ) and the rate constants of the quenching ( K q ) were determined by Stern-Volmer equation. The values of K sv have been obtained (2.07 ± 0.11) × 106 and (0.48 ± 0.01) × 106 M−1 for [ Fe (2,3- tmtppa )]4+ and [ Ni (2,3- tmtppa )]4+, respectively, at 27°C. The higher affinity of [ Fe (2,3- tmtppa )]4+ for the quenching of EB-DNA fluorescence with respect to Ni complex was attributed to self-stacking of the former along DNA helix and favorable energy transfer between EB+ and cationic porphyrazine. ΔG25 (the difference between the free energy of the native ( N ) and the denatured (D) form of DNA at 25°C), ΔHm and ΔSm (difference between enthalpy and entropy at Tm) were extracted from thermal curves. The decline in the melting temperature of DNA following the addition of porphyrazine complexes confirms that the substantial mode of Ni and Fe interaction is not intercalation. The thermodynamic results imply that both Ni and Fe complexes have a slight destabilizing effect on the DNA. A comparison between [ Ni ( tmtppa )]4+ and [ Fe ( tmtppa )]4+ indicates that the latter is more effective than the former.

Relationship between stability and flexibility in the most flexible region of Photinus pyralis luciferase

Firefly luciferase is a protein with a large N-terminal and a small C-terminal domain. B-factor analysis shows that its C-terminal is much more flexible than its N-terminal. Studies on hyperthermophile proteins have been shown that the increased thermal stability of hyperthermophile proteins is due to their enhanced conformational rigidity and the relationship between flexibility, stability and function in most of proteins is on debate. Two mutations (D474K and D476N) in the most flexible region of firefly luciferase were designed. Thermostability analysis shows that D476N mutation doesn't have any significant effect but D474K mutation destabilized protein. On the other hand, flexibility analysis using dynamic quenching and limited proteolysis demonstrates that D474K mutation became much more flexible than wild type although D476N doesn't have any significant difference. Intrinsic and ANS fluorescence studies demonstrate that D476N mutation is brought about by structural changes without significant effect on thermostability and flexibility. Molecular modeling reveals that disruption of a salt bridge between D(474) and K(445) accompanying with some H-bond deletion may be involved in destabilization of D474K mutant.

The effect of macromolecular crowding, ionic strength and calcium binding on calmodulin dynamics

The flexibility in the structure of calmodulin (CaM) allows its binding to over 300 target proteins in the cell. To investigate the structure-function relationship of CaM, we combined methods of computer simulation and experiments based on circular dichroism (CD) to investigate the structural characteristics of CaM that influence its target recognition in crowded cell-like conditions. We developed a unique multiscale solution of charges computed from quantum chemistry, together with protein reconstruction, coarse-grained molecular simulations, and statistical physics, to represent the charge distribution in the transition from apoCaM to holoCaM upon calcium binding. Computationally, we found that increased levels of macromolecular crowding, in addition to calcium binding and ionic strength typical of that found inside cells, can impact the conformation, helicity and the EF hand orientation of CaM. Because EF hand orientation impacts the affinity of calcium binding and the specificity of CaM's target selection, our results may provide unique insight into understanding the promiscuous behavior of calmodulin in target selection inside cells.

Proteins are workhorses for driving biological functions inside cells. Calmodulin (CaM) is a protein that can carry cellular signals by triggered conformational changes due to calcium binding that alters target binding. Interestingly, CaM is able to bind over 300 targets. One of the challenges in characterizing CaM's ability to bind multiple targets lies in that CaM is a flexible protein and its structure is easily modulated by the physicochemical changes in its surroundings, particularly inside a complex cellular milieu. In order to determine structure-function relationships of CaM, we employed a combined approach of experiments, computer simulations and statistical physics in the investigation of the effect of calcium-binding, salt concentration, and macromolecular crowding on CaM. The results revealed unique folding energy landscapes of CaM in the absence and presence of calcium ions and the structural implications of CaM are interpreted under cell-like conditions. Further, a large conformational change in CaM in response to environmental impacts, dictates the packing of local helices that may be critical to its function of target binding and recognition among vast target selections.

Effects of trehalose and sorbitol on the activity and structure of Pseudomonas cepacia lipase: spectroscopic insight

The stability of enzymes with no reduction in their catalytic activity still remains a critical issue in industrial applications. Naturally occurring osmolytes are commonly used as protein stabilizers. In this study we have investigated the effects of sorbitol and trehalose on the structural stability and activity of Pseudomonas cepacia lipase (PCL), using UV-visible, circular dichroism (CD) and fluorescence spectroscopy. Surface plasmon resonance (SPR) technique was used to trace changes in the refractive index and dielectric constant of the environment. The results revealed that catalytic activity and intrinsic fluorescence intensity of PCL increased in the presence of both osmolytes. Far-UV CD spectra indicated that the protein has undergone some conformational changes upon interacting with these osmolytes. Increasing the concentration of sorbitol led to changes in the refractive index and consequently the dielectric constant of environment; whereas in the case of trehalose, such changes were not significant. Unfavorable interactions of trehalose with protein surface induced higher preferential exclusion from the enzyme-water interface than that of sorbitol. Results of this report could give further insights about the stabilization mechanism of osmolytes.

A general strategy to characterize calmodulin-calcium complexes involved in CaM-target recognition: DAPK and EGFR calmodulin binding domains interact with different calmodulin-calcium complexes

Calmodulin (CaM) is a ubiquitous Ca(2+) sensor regulating many biochemical processes in eukaryotic cells. Its interaction with a great variety of different target proteins has led to the fundamental question of its mechanism of action. CaM exhibits four "EF hand" type Ca(2+) binding sites. One way to explain CaM functioning is to consider that the protein interacts differently with its target proteins depending on the number of Ca(2+) ions bound to it. To test this hypothesis, the binding properties of three entities known to interact with CaM (a fluorescent probe and two peptide analogs to the CaM binding sites of death associated protein kinase (DAPK) and of EGFR) were investigated using a quantitative approach based on fluorescence polarization (FP). Probe and peptide interactions with CaM were studied using a titration matrix in which both CaM and calcium concentrations were varied. Experiments were performed with SynCaM, a hybrid CaM able to activate CaM dependent enzymes from mammalian and plant cells. Results show that the interaction between CaM and its targets is regulated by the number of calcium ions bound to the protein, namely one for the DAPK peptide, two for the probe and four for the EGFR peptide. The approach used provides a new tool to elaborate a typology of CaM-targets, based on their recognition by the various CaM-Ca(n) (n=0-4) complexes. This article is part of a Special Issue entitled: 11th European Symposium on Calcium.

Relationship between stability and bioluminescence color of firefly luciferase

Firefly luciferase catalyzes the oxidation of luciferin in the presence of ATP, Mg(2+) and molecular oxygen. The bioluminescence color of firefly luciferases is identified by the luciferase structure and assay conditions. Amongst different types of beetles, luciferase from Phrixotrix railroad worm (PhRE) with a unique additional residue (Arg353) naturally emits red bioluminescence color. By insertion of Arg356 in luciferase of Lampyris turkestanicus, corresponding to Arg353 in Phrixotrix hirtus, the color of the emitted light was changed to red. To understand the effect of this position on the bioluminescence color shift, four residues with similar sizes but different charges (Arg, Lys, Glu, and Gln) were inserted into Photinus pyralis luciferase. Comparison of mutants with native luciferase shows that mutation brought an increase in the content of secondary structure and globular compactness of (P. pylalis) luciferase. Comparative study of chemical denaturation of native and mutant luciferases by activity measurement, intrinsic and extrinsic fluorescence, circular dichroism, and DSC techniques revealed that insertion of positively charged residues (Arg, Lys) in the flexible loop (352-358) plays a significant role on the stability of (P. pyralis) luciferase and changes the light color to red.

Inverse tuning of metal binding affinity and protein stability by altering charged coordination residues in designed calcium binding proteins

Ca(2+ )binding proteins are essential for regulating the role of Ca(2+ )in cell signaling and maintaining Ca(2+ )homeostasis. Negatively charged residues such as Asp and Glu are often found in Ca(2+ )binding proteins and are known to influence Ca(2+ )binding affinity and protein stability. In this paper, we report a systematic investigation of the role of local charge number and type of coordination residues in Ca(2+ )binding and protein stability using de novo designed Ca(2+ )binding proteins. The approach of de novo design was chosen to avoid the complications of cooperative binding and Ca(2+)-induced conformational change associated with natural proteins. We show that when the number of negatively charged coordination residues increased from 2 to 5 in a relatively restricted Ca(2+)-binding site, Ca(2+ )binding affinities increased by more than 3 orders of magnitude and metal selectivity for trivalent Ln(3+ )over divalent Ca(2+ )increased by more than 100-fold. Additionally, the thermal transition temperatures of the apo forms of the designed proteins decreased due to charge repulsion at the Ca(2+ )binding pocket. The thermal stability of the proteins was regained upon Ca(2+ )and Ln(3+ )binding to the designed Ca(2+ )binding pocket. We therefore observe a striking tradeoff between Ca(2+)/Ln(3+ )affinity and protein stability when the net charge of the coordination residues is varied. Our study has strong implications for understanding and predicting Ca(2+)-conferred thermal stabilization of natural Ca(2+ )binding proteins as well as for designing novel metalloproteins with tunable Ca(2+ )and Ln(3+ )binding affinity and selectivity.PACS codes: 05.10.-a.

Thermodynamic effects of noncoded and coded methionine substitutions in calmodulin

The methionine residues in the calcium (Ca2+) regulatory protein calmodulin (CaM) are structurally and functionally important. They are buried within the N- and C-domains of apo-CaM but become solvent-exposed in Ca2+-CaM, where they interact with numerous target proteins. Previous structural studies have shown that methionine substitutions to the noncoded amino acids selenomethionine, ethionine, or norleucine, or mutation to leucine do not impact the main chain structure of CaM. Here we used differential scanning calorimetry to show that these substitutions enhance the stability of both domains, with the largest increase in melting temperature (19-26 degrees C) achieved with leucine or norleucine in the apo-C-domain. Nuclear magnetic resonance spectroscopy experiments also revealed the loss of a slow conformational exchange process in the Leu-substituted apo-C-domain. In addition, isothermal titration calorimetry experiments revealed considerable changes in the enthalpy and entropy of target binding to apo-CaM and Ca2+-CaM, but the free energy of binding was largely unaffected due to enthalpy-entropy compensation. Collectively, these results demonstrate that noncoded and coded methionine substitutions can be accommodated in CaM because of the structural plasticity of the protein. However, adjustments in side-chain packing and dynamics lead to significant differences in protein stability and the thermodynamics of target binding.

Rational design of a conformation-switchable Ca2+- and Tb3+-binding protein without the use of multiple coupled metal-binding sites

Ca2+, as a messenger of signal transduction, regulates numerous target molecules via Ca2+-induced conformational changes. Investigation into the determinants for Ca2+-induced conformational change is often impeded by cooperativity between multiple metal-binding sites or protein oligomerization in naturally occurring proteins. To dissect the relative contributions of key determinants for Ca2+-dependent conformational changes, we report the design of a single-site Ca2+-binding protein (CD2.trigger) created by altering charged residues at an electrostatically sensitive location on the surface of the host protein rat Cluster of Differentiation 2 (CD2).CD2.trigger binds to Tb3+ and Ca2+ with dissociation constants of 0.3 +/- 0.1 and 90 +/- 25 microM, respectively. This protein is largely unfolded in the absence of metal ions at physiological pH, but Tb3+ or Ca2+ binding results in folding of the native-like conformation. Neutralization of the charged coordination residues, either by mutation or protonation, similarly induces folding of the protein. The control of a major conformational change by a single Ca2+ ion, achieved on a protein designed without reliance on sequence similarity to known Ca2+-dependent proteins and coupled metal-binding sites, represents an important step in the design of trigger proteins.

Comparative studies of wild type Escherichia coli 5-enolpyruvylshikimate 3-phosphate synthase with three glyphosate-insensitive mutated forms: activity, stability and structural characterization

5-Enolpyruvylshikimate 3-phosphate (EPSP) synthase is an essential enzyme of the shikimate pathway and is the target for the herbicide, glyphosate. Several glyphosate-insensitive forms of Escherichia coli EPSP synthase had been reported in the literatures. In the present study the function and structure of wild type enzyme and three different mutated variants (G96A, A183T and G96A/A183T) were compared. Results showed that G96A and G96A/A183T variants are insensitive to glyphosate but display a 31- and 8-fold lower affinity for phosphoenolpyruvate (PEP) as substrate, respectively. In addition, chemical stability of the enzyme variants against Gdn-HCl revealed more stability of the wild type and G96A variant when compared to the G96A/A183T and A183T variants. Comparison of the enzymes containing Ala183Thr replacement with the wild type showed a lower resistance to digestion by the proteases. Moreover, with respect to fluorescence quenching by acrylamide, A183T and G96A/A183T variants were characterized by a higher structural flexibility and more exposure of tryptophan residues to the solvent. In addition, based on the results of circular dichroism and intrinsic fluorescence studies, these two variants represent a significant decrease of secondary structures and changes in the tertiary structure as compared to the wild type and the G96A variant.

Biophysical study of thermal denaturation of apo-calmodulin: dynamics of native and unfolded states

Apo-calmodulin, a small, mainly alpha, soluble protein is a calcium-dependent protein activator. This article presents a study of internal dynamics of native and thermal unfolded apo-calmodulin, using quasi-elastic neutron scattering. This technique can probe protein internal dynamics in the picosecond timescale and in the nanometer length-scale. It appears that a dynamical transition is associated with thermal denaturation of apo-calmodulin. This dynamical transition goes together with a decrease of the confinement of hydrogen atoms, a decrease of immobile protons proportion and an increase of dynamical heterogeneity. The comparison of native and unfolded states dynamics suggests that the dynamics of protein atoms is more influenced by their distance to the backbone than by their solvent exposure.

Critical Role of Glu175 on Stability and Folding of Bacterial Luciferase: Stopped-flow Fluorescence Study

Bacterial luciferase is a heterodimeric enzyme, which catalyzes the light emission reaction, utilizing reduced FMN (FMNH2), a long chain aliphatic aldehyde and O(2), to produce green-blue light. This enzyme can be readily classed as slow or fast decay based on their rate of luminescence decay in a single turnover. Mutation of Glu175 in alpha subunit to Gly converted slow decay Xenorhabdus Luminescence luciferase to fast decay one. The following studies revealed that changing the luciferase flexibility and lake of Glu-flavin interactions are responsible for the unusual kinetic properties of mutant enzyme. Optical and thermodynamics studies have caused a decrease in free energy and anisotropy of mutant enzyme. Moreover, the role of Glu175 in transition state of folding pathway by use of stopped-flow fluorescence technique has been studied which suggesting that Glu175 is not involved in transition state of folding and appears as surface residue of the nucleus or as a member of one of a few alternative folding nuclei. These results suggest that mutation of Glu175 to Gly extended the structure of Xenorhabdus Luminescence luciferase, locally.

Micellar Peroxidase-Catalyzed Synthesis of Chiral Polyaniline

Micellar peroxidase-catalyzed synthesis of chiral polyaniline (PANI) in the presence of dodecylbenzenesulfonic acid (DBSA) was developed. The effect of DBSA concentration on the catalytic efficiency of horseradish and palm tree peroxidases was examined. Favorable conditions for the enzymatic synthesis of chiral PANI, determined by a multiple factors design, demonstrated that the PANIs with the highest chirality were produced in the presence of low concentrations of optically active camphorsulphonic acid (CSA). Unexpectedly, the chiral PANI was also synthesized in the absence of CSA in feed. The favorable conditions for the enzymatic production of chiral and conducting PANIs were shown to be different. The morphology of the chiral PANI particles was examined by transmission and scanning electron microscopies.

The Influence of Insertion of a Critical Residue (Arg356) in Structure and Bioluminescence Spectra of Firefly Luciferase

The firefly bioluminescence reaction, which uses luciferin, Mg-ATP, and molecular oxygen to yield an electronically excited oxyluciferin, is carried out by luciferase and visible light is emitted. The bioluminescence color of firefly luciferases is determined by the luciferase structure and assay conditions. Among different beetle luciferases, those from Phrixothrix railroad worm emit either yellow or red bioluminescence colors. Sequence alignment analysis shows that the red-emitter luciferase from Phrixothrix hirtus has an additional Arg residue at 353, which is absent in firefly luciferases. We report here the construction and purification of a mutant at residue Arg(356), which is not conserved in beetle luciferases. By insertion of an additional residue (Arg(356)) using site-specific insertion mutagenesis in a green-emitter luciferase (Lampyris turkestanicus) the color of emitted light was changed to red and the optimum temperature of activity was also increased. Insertion of this Arg in an important flexible loop showed changes of the bioluminescence color and the luciferase reaction took place with relatively retention of its basic kinetic properties such as Km and relative activity. Comparison of native and mutant luciferases using homology modeling reveals a significant conformational change of the flexible loop in the red mutant. Movement of flexible loop brought about a new ionic interaction concomitant with a change in polarity of the emitter site, thereby leading to red emission. It is worthwhile to note that the increased optimum temperature and emission of red light might make mutant luciferase a suitable reporter for the study of gene expression and bioluminescence imaging.

Thermostabilization of Bacillus amyloliquefaciens α-amylase by chemical cross-linking

Chemical cross-linking of a mesophilic alpha-amylase from Bacillus amyloliquefaciens (BAA) was carried out. Intra-molecular cross-links between lysine residues upon treatment of the enzyme with ethylene glycol bis(succinic acid N-hydroxy succinimide ester) resulted in enhancement of thermostability as indicated by irreversible thermoinactivation experiments. Enhancement of thermostability coincided with a dramatic protection against aggregation, combined with a decrease in surface hydrophobicity. Deamidation, another important mechanism of irreversible thermoinactivation, was also diminished upon modification. While no significant changes in the kinetic parameters are evident, rigidification of the protein structure is suggested by circular dichroism (CD) and fluorescence studies.

Stepwise modification of lysine residues of glucose oxidase with citraconic anhydride

Structural properties of modified forms of glucose oxidase made by stepwise specific modification have been investigated. By a single step modification, one of the modified forms resulted in the conversion of native structure of glucose oxidase to molten globule like form [S. Hosseinkhani, B. Ranjbar, H. Naderi-Manesh, M. Nemat-Gorgani, FEBS Lett. 561 (2004) 213-216]. Chemical modification of lysine residues in glucose oxidase was carried out using different concentration of citraconic anhydride. Modification brought about changes in the tertiary structure with some degree of alteration in secondary structure. FTIR, far and near-UV CD spectropolarimetry, intrinsic and extrinsic fluorescence spectroscopy showed structural changes of glucose oxidase in a concentration dependent manner. This was supported by comparative study of secondary and tertiary structure.