Degradable, thermo-sensitive poly(N-isopropyl acrylamide)-based scaffolds with controlled porosity for tissue engineering applications

UV-Initiated Frontal Polymerization for the Fast Synthesis of Bubble-Free, Self-Propagating Hydrogel Anticorrosive Coatings

Hydrogels are formed through the cross-linking of hydrophilic polymer chains within an aqueous microenvironment. A novel synthesis strategy, UV-initiated frontal polymerization to quickly synthesize bubble-free, self-propagating hydrogel anticorrosive coatings in aqueous conditions, was presented, in which the self-propagating polymerization rate reached 16.7 mm min^-1. SEM, AFM, FTIR, EIS, IC, XPS, and ultra-depth-of-field microscopy were used to characterize the surface morphology and anti-corrosion properties of the hydrogel coating. The addition of nano-SiO₂ formed dense hydrogen bonds, and the stability of the three-dimensional network was enhanced. Underwater, the hydrogel coating could physically block corrosive media from reaching steel surfaces, and it was 75% effective at blocking chloride ions after 7 days under osmotic pressure. In addition, 1,2,4-triazole accumulated on the steel surface, and then the active anti-corrosion function took effect. This paper provides the basis for the in situ synthesis of hydrogel anticorrosive coatings on the surface of mild steel in a wet or underwater state.

The Application of Porous Scaffolds for Cardiovascular Tissues

As the number of arteriosclerotic diseases continues to increase, much improvement is still needed with treatments for cardiovascular diseases. This is mainly due to the limitations of currently existing treatment options, including the limited number of donor organs available or the long-term durability of the artificial organs. Therefore, tissue engineering has attracted significant attention as a tissue regeneration therapy in this area. Porous scaffolds are one of the effective methods for tissue engineering. However, it could be better, and its effectiveness varies depending on the tissue application. This paper will address the challenges presented by various materials and their combinations. We will also describe some of the latest methods for tissue engineering.

Recent Advances in Cardiac Patches: Materials, Preparations, and Properties

Cardiac patches are biomaterials that can be used for transplantation and repair of damaged myocardium by combining seed cells with the ability to form cardiomyocytes and suitable scaffold materials. On the one hand, they provide temporary support to the infarcted area, and on the other hand, they repair the damaged myocardium by delivering cells or bioactive factors to integrate with the host, which have gradually become a hot research topic in recent years. This paper summarizes the structural properties of natural myocardium and reviews the recent research progress of cardiac patches, including the seed cells and scaffold materials used in patch preparation, as well as the main methods of scaffold preparation and the structure properties of various scaffolds. In addition, a comprehensive analysis of the problems faced in the clinical implementation of cardiac patches is presented. Finally, we look forward to the development of cardiac patches and point out that precisely tunable anisotropic tissue engineering scaffolds close to natural myocardial tissue will become an important direction for future research.

Medical Applications of Porous Biomaterials: Features of Porosity and Tissue-Specific Implications for Biocompatibility

Porosity is an important material feature commonly employed in implants and tissue scaffolds. The presence of material voids permits the infiltration of cells, mechanical compliance, and outward diffusion of pharmaceutical agents. Various studies have confirmed that porosity indeed promotes favorable tissue responses, including minimal fibrous encapsulation during the foreign body reaction (FBR). However, increased biofilm formation and calcification is also described to arise due to biomaterial porosity. Additionally, the relevance of host responses like the FBR, infection, calcification, and thrombosis are dependent on tissue location and specific tissue microenvironment. In this review, the features of porous materials and the implications of porosity in the context of medical devices is discussed. Common methods to create porous materials are also discussed, as well as the parameters that are used to tune pore features. Responses toward porous biomaterials are also reviewed, including the various stages of the FBR, hemocompatibility, biofilm formation, and calcification. Finally, these host responses are considered in tissue specific locations including the subcutis, bone, cardiovascular system, brain, eye, and female reproductive tract. The effects of porosity across the various tissues of the body is highlighted and the need to consider the tissue context when engineering biomaterials is emphasized.

Recent Development of Conductive Hydrogels for Tissue Engineering: Review and Perspective

In recent years, tissue engineering techniques have been rapidly developed and offer a new therapeutic approach to organ or tissue damage repair. However, most of tissue engineering scaffolds are nonconductive and cannot establish effective electrical coupling with tissue for the electroactive tissues. Electroconductive hydrogels (ECHs) have received increasing attention in tissue engineering owing to their electroconductivity, biocompatibility and high water content. In vitro, ECHs can not only promote the communication of electrical signals between cells, but also mediate the adhesion, proliferation, migration, and differentiation of different kinds of cells. In vivo, ECHs can transmit the electric signal to electroactive tissues and activate bioelectrical signaling pathways to promote tissue repair. As a result, implanting ECHs into damaged tissues can effectively reconstruct physiological functions related to electrical conduction. In this review, we first present an overview about the classifications and the fabrication methods of ECHs. And then, the applications of ECHs in tissue engineering, including cardiac, nerve, skin and skeletal muscle tissue, are highlighted. At last, we provide some rational guidelines for designing ECHs towards clinical applications. This article is protected by copyright. All rights reserved.

High-performance bilayer composites for the replacement of osteochondral defects

Two novel bilayer constructs for the repair of osteochondral defects were developed from nanofibers and ceramic particles embedded into PVA matrices, exhibiting multiple promising properties similar to those of corresponding natural tissues.

An injectable thermosensitive hydrogel with self-assembled peptide coupled with antimicrobial peptide for enhanced wound healing

Wound dressing based on thermosensitive hydrogel shows advantages over performed traditional dressings such as rapid reversible sol-gel-sol transition property and the capacity of filling the irregular wound area. Herein, RA-Amps...

A Review on Synthesis Methods of Phyllosilicate- and Graphene-Filled Composite Hydrogels

This review discusses, in brief, the various synthetic methods of two widely-used nanofillers; phyllosilicate and graphene. Both are 2D fillers introduced into hydrogel matrices to achieve mechanical robustness and water uptake behavior. Both the fillers are inserted by physical and chemical gelation methods where most of the chemical gelation, i.e., covalent approaches, results in better physical properties compared to their physical gels. Physical gels occur due to supramolecular assembly, van der Waals interactions, electrostatic interactions, hydrophobic associations, and H-bonding. For chemical gelation, in situ radical triggered gelation mostly occurs.

Poly(2-alkyl-2-oxazoline)-Heparin Hydrogels-Expanding the Physicochemical Parameter Space of Biohybrid Materials

Poly(ethylene glycol) (PEG)-glycosaminoglycan (GAG) hydrogel networks are established as very versatile biomaterials. Herein, the synthetic gel component of the biohybrid materials is systematically varied by combining different poly(2-alkyl-2-oxazolines) (POx) with heparin applying a Michael-type addition crosslinking scheme: POx of gradated hydrophilicity and temperature-responsiveness provides polymer networks of distinctly different stiffness and swelling. Adjusting the mechanical properties and the GAG concentration of the gels to similar values allows for modulating the release of GAG-binding growth factors (VEGF165 and PDGF-BB) by the choice of the POx and its temperature-dependent conformation. Adsorption of fibronectin, growth of fibroblasts, and bacterial adhesion scale with the hydrophobicity of the gel-incorporated POx. In vitro hemocompatibility tests with freshly drawn human whole blood show advantages of POx-based gels compared to the PEG-based reference materials. Biohybrid POx hydrogels can therefore enable biomedical technologies requiring GAG-based materials with customized and switchable physicochemical characteristics.

Engineered Bioactive Polymeric Surfaces by Radiation Induced Graft Copolymerization: Strategies and Applications

The interest in developing antimicrobial surfaces is currently surging with the rise in global infectious disease events. Radiation-induced graft copolymerization (RIGC) is a powerful technique enabling permanent tunable and desired surface modifications imparting antimicrobial properties to polymer substrates to prevent disease transmission and provide safer biomaterials and healthcare products. This review aims to provide a broader perspective of the progress taking place in strategies for designing various antimicrobial polymeric surfaces using RIGC methods and their applications in medical devices, healthcare, textile, tissue engineering and food packing. Particularly, the use of UV, plasma, electron beam (EB) and γ-rays for biocides covalent immobilization to various polymers surfaces including nonwoven fabrics, films, nanofibers, nanocomposites, catheters, sutures, wound dressing patches and contact lenses is reviewed. The different strategies to enhance the grafted antimicrobial properties are discussed with an emphasis on the emerging approach of in-situ formation of metal nanoparticles (NPs) in radiation grafted substrates. The current applications of the polymers with antimicrobial surfaces are discussed together with their future research directions. It is expected that this review would attract attention of researchers and scientists to realize the merits of RIGC in developing timely, necessary antimicrobial materials to mitigate the fast-growing microbial activities and promote hygienic lifestyles.

A review of hydrogel systems based on poly(N-isopropyl acrylamide) for use in the engineering of bone tissues

Bone fracture is usually a medical condition where occurred by high force impact or stress. Recent advances to repair damaged or diseased bone tissues employs three-dimensional (3D) polymer matrices. This review aims to investigate the potential of injectable, dual thermally, and chemically gelable N-isopropyl acrylamide-based hydrogels to deliver scaffold, cells, and growth factors in vitro and in vivo.

Multi-stimuli-responsive aggregation of nanoparticles driven by the manipulation of colloidal stability

The capacity to control the dispersed or aggregated state of colloidal particles is particularly attractive for facilitating a diverse range of smart applications. For this reason, stimuli-responsive nanoparticles have garnered much attention in recent years. Colloidal systems that exhibit multi-stimuli-responsive behaviour are particularly interesting materials due to the greater spatial and temporal control they display in terms of dispersion/aggregation status; such behaviour can be exploited for implant formation, easy separation of a previously dispersed material or for the blocking of unwanted pores. This review will provide an overview of the recent publications regarding multi-stimuli-responsive microgels and hybrid core-shell nanoparticles. These polymer-based nanoparticles are highly sensitive to environmental conditions and can form aggregated clusters due to a loss of colloidal stability, triggered by temperature, pH and ionic strength stimuli. We aim to provide the reader with a discussion of the recent developments in this area, as well as an understanding of the fundamental concepts which underpin the responsive behaviour, and an exploration of their applications.

Enzymatically Triggered Jack-in-the-Box-like Hydrogels

Enzymes can support the synthesis or degradation of biomacromolecules in natural processes. Here, we demonstrate that enzymes can induce a macroscopic-directed movement of microstructured hydrogels following a mechanism that we call a "Jack-in-the-box" effect. The material's design is based on the formation of internal stresses induced by a deformation load on an architectured microscale, which are kinetically frozen by the generation of polyester locking domains, similar to a Jack-in-the-box toy (i.e., a compressed spring stabilized by a closed box lid). To induce the controlled macroscopic movement, the locking domains are equipped with enzyme-specific cleavable bonds (i.e., a box with a lock and key system). As a result of enzymatic reaction, a transformed shape is achieved by the release of internal stresses. There is an increase in entropy in combination with a swelling-supported stretching of polymer chains within the microarchitectured hydrogel (i.e., the encased clown pops-up with a pre-stressed movement when the box is unlocked). This utilization of an enzyme as a physiological stimulus may offer new approaches to create interactive and enzyme-specific materials for different applications such as an optical indicator of the enzyme's presence or actuators and sensors in biotechnology and in fermentation processes.

Bioengineered Skin Substitutes: Advances and Future Trends

As the largest organ in the human body, the skin has the function of maintaining balance and protecting from external factors such as bacteria, chemicals, and temperature. If the wound does not heal in time after skin damage, it may cause infection or life-threatening complications. In particular, medical treatment of large skin defects caused by burns or trauma remains challenging. Therefore, human bioengineered skin substitutes represent an alternative approach to treat such injuries. Based on the chemical composition and scaffold material, skin substitutes can be classified into acellular or cellular grafts, as well as natural-based or synthetic skin substitutes. Further, they can be categorized as epidermal, dermal, and composite grafts, based on the skin component they contain. This review presents the common commercially available skin substitutes and their clinical use. Moreover, the choice of an appropriate hydrogel type to prepare cell-laden skin substitutes is discussed. Additionally, we present recent advances in the field of bioengineered human skin substitutes using three-dimensional (3D) bioprinting techniques. Finally, we discuss different skin substitute developments to meet different criteria for optimal wound healing.

Bioprintable tough hydrogels for tissue engineering applications

Bioprinting is an advanced fabrication approach to engineer complex living structures as the conventional fabrication methods are incapable of integrating structural and biological complexities. It offers the versatility of printing different cell incorporated hydrogels (bioink) layer by layer; offering control over spatial resolution and cell distribution to mimic native tissue architectures. However, the bioprinting of tough hydrogels involve additional complexities, such as employing complex crosslinking or reinforcing mechanisms during printing and pre/post printing cellular activities. Solving this complexity requires attention from engineering, material science and cell biology perspectives. In this review, we discuss different types of bioprinting techniques with focus on current state-of-the-art in bioink formulations and pivotal characteristics of bioinks for tough hydrogel printing. We discuss the scope of transition from 3D to 4D bioprinting and some of the advanced characterization techniques for in-depth understanding of the 3D printing process from the microstructural perspective, along with few specific applications and conclude with the future perspectives in biofabrication of hydrogels for tissue engineering applications.

Thermo-responsive plasmonic systems: old materials with new applications

Thermo-responsive plasmonic systems of gold and poly(N-isopropylacrylamide) have been actively studied for several decades but this system keeps reinventing itself, with new concepts and applications which seed new fields. In this minireview, we show the latest few years development and applications of this intriguing system. We start from the basic working principles of this puzzling system which shows different plasmon shifts for even slightly different chemistries. We then present its applications to colloidal actuation, plasmon/meta-film tuning, and bioimaging and sensing. Finally we briefly summarize and propose several promising applications of the ongoing effort in this field.

Thermoresponsive Inverted Colloidal Crystal Hydrogel Scaffolds for Lymphoid Tissue Engineering

Inverted colloidal crystal (ICC) hydrogel scaffolds represent unique opportunities in modeling lymphoid tissues and expanding hematopoietic-lymphoid cells. Fully interconnected spherical pore arrays direct the formation of stromal networks and facilitate interactions between stroma and hematopoietic-lymphoid cells. However, due to the intricate architecture of these materials, release of expanded cells is restricted and requires mechanical disruption or chemical dissolution of the hydrogel scaffold. One potent biomaterials strategy to release pore-entrapped hematopoietic-lymphoid cells without breaking the scaffolds apart is to transiently increase the dimensions of these materials using stimuli-responsive polymers. Having this mindset, thermoresponsive ICC scaffolds that undergo rapid (<1 min) and substantial (>300%) diameter change over a physiological temperature range (4-37 °C) by using poly(N-isopropylacrylamide) (PNIPAM) with nanogel crosslinkers is developed. For a proof-of-concept study, the stromal niche by creating osteospheroids, aggregates of osteoblasts, and bone chips is first replicated, and subsequently Nalm-6 model hematopoietic-lymphoid cells are introduced. A sixfold increase in cell count is harvested when ICC hydrogel scaffolds are expanded without termination of the established 3D stromal cell culture. It is envisioned that thermoresponsive ICC hydrogel scaffolds will enable for scalable and sustainable ex vivo expansion of hematopoietic-lymphoid cells.

Thermoresponsive polymers and their biomedical application in tissue engineering - a review

Thermoresponsive polymers hold great potential in the biomedical field, since they enable the fabrication of cell sheets, in situ drug delivery and 3D-printing under physiological conditions. In this review we provide an overview of several thermoresponsive polymers and their application, with focus on poly(N-isopropylacrylamide)-surfaces for cell sheet engineering. Basic knowledge of important processes like protein adsorption on surfaces and cell adhesion is provided. For different thermoresponsive polymers, namely PNIPAm, Pluronics, elastin-like polypeptides (ELP) and poly(N-vinylcaprolactam) (PNVCL), synthesis and basic chemical and physical properties have been described and the mechanism of their thermoresponsive behavior highlighted. Fabrication methods of thermoresponsive surfaces have been discussed, focusing on PNIPAm, and describing several methods in detail. The latter part of this review is dedicated to the application of the thermoresponsive polymers and with regard to cell sheet engineering, the process of temperature-dependent cell sheet detachment is explained. We provide insight into several applications of PNIPAm surfaces in cell sheet engineering. For Pluronics, ELP and PNVCL we show their application in the field of drug delivery and tissue engineering. We conclude, that research of thermoresponsive polymers has made big progress in recent years, especially for PNIPAm since the 1990s. However, manifold research possibilities, e.g. in surface fabrication and 3D-printing and further translational applications are conceivable in near future.

Facile Fabrication of Composite Scaffolds for Long-Term Controlled Dual Drug Release

Bone tuberculosis (TB) caused by mycobacterium tuberculosis continues to present a formidable challenge to humans. To effectively cure serious bone TB, a novel kind of composite scaffolds with long-term dual drug release behaviours were prepared to satisfy the needs of both bone regeneration and antituberculosis drug therapy. In virtue of an improved O/W emulsion technique, water-soluble isoniazid (INH)-loaded gelatin microparticles were obtained by tailoring the content of β-tricalcium phosphate (β-TCP), which played significant roles in INH entrapment efficiency and drug release behaviours. By mixing with the poly(ε-caprolactone)-block-poly (lactic-co-glycolic acid) (b-PLGC) solution containing oil-soluble rifampicin (RFP) via the particle leaching combined with phase separation technique, the dual drugs-loaded composite scaffolds were fabricated, which possessed interconnected porous structures and achieved the steady release of INH and RFP drugs for three months. Moreover, this dual drugs-loaded system could basically achieve their expectant roles of respective drugs without obvious influences with each other. This strategy on preparation of intelligent composite scaffolds with the multi-drugs loading capacity and controlled long-term release behaviour will be potential and promising substrates in clinical treatment of bone tuberculosis.

Current research trends and challenges in tissue engineering for mending broken hearts

Cardiovascular disease (CVD) is among the leading causes of mortality worldwide. The shortage of donor hearts to treat end-stage heart failure patients is a critical problem. An average of 3500 heart transplant surgeries are performed globally, half of these transplants are performed in the US alone. Stem cell therapy is growing rapidly as an alternative strategy to repair or replace the damaged heart tissue after a myocardial infarction (MI). Nevertheless, the relatively poor survival of the stem cells in the ischemic heart is a major challenge to the therapeutic efficacy of stem-cell transplantation. Recent advancements in tissue engineering offer novel biomaterials and innovative technologies to improve upon the survival of stem cells as well as to repair the damaged heart tissue following a myocardial infarction (MI). However, there are several limitations in tissue engineering technologies to develop a fully functional, beating cardiac tissue. Therefore, the main goal of this review article is to address the current advancements and barriers in cardiac tissue engineering to augment the survival and retention of stem cells in the ischemic heart.

Functional Skin Grafts: Where Biomaterials Meet Stem Cells

Skin tissue engineering has attained several clinical milestones making remarkable progress over the past decades. Skin is inhabited by a plethora of cells spatiotemporally arranged in a 3-dimensional (3D) matrix, creating a complex microenvironment of cell-matrix interactions. This complexity makes it difficult to mimic the native skin structure using conventional tissue engineering approaches. With the advent of newer fabrication strategies, the field is evolving rapidly. However, there is still a long way before an artificial skin substitute can fully mimic the functions and anatomical hierarchy of native human skin. The current focus of skin tissue engineers is primarily to develop a 3D construct that maintains the functionality of cultured cells in a guided manner over a period of time. While several natural and synthetic biopolymers have been translated, only partial clinical success is attained so far. Key challenges include the hierarchical complexity of skin anatomy; compositional mismatch in terms of material properties (stiffness, roughness, wettability) and degradation rate; biological complications like varied cell numbers, cell types, matrix gradients in each layer, varied immune responses, and varied methods of fabrication. In addition, with newer biomaterials being adopted for fabricating patient-specific skin substitutes, issues related to escalating processing costs, scalability, and stability of the constructs under in vivo conditions have raised some concerns. This review provides an overview of the field of skin regenerative medicine, existing clinical therapies, and limitations of the current techniques. We have further elaborated on the upcoming tissue engineering strategies that may serve as promising alternatives for generating functional skin substitutes, the pros and cons associated with each technique, and scope of their translational potential in the treatment of chronic skin ailments.

Temperature Driven Transformation in Dextran-Graft-PNIPAM/Embedded Silver Nanoparticle Hybrid System

During the last decade, stimuli-responsible polymers based on poly(N-isopropylacrylamide) having conformational transition in the range of physiological temperature have been discussed as novel drug delivery nanosystems. A star-like copolymer with a dextran core and grafted poly(N-isopropylacrylamide) arms (D-g-PNIPAM) was synthesized, characterized, and used as a matrix for silver sol preparation. The comparative study of the behavior of individual D-g-PNIPAM and the nanohybrid system D-g-PNIPAM/silver nanoparticles has been done in the temperature range near the lower critical solution temperature (LCST). The methods of Dynamic Light Scattering, small angle X-ray scattering, and UV-VIS absorption spectroscopy have been used. The existence of single nanoparticles and aggregated nanoparticles located in a limited polymer macromolecular volume was established. The increase of the temperature leads to slight aggregation of the silver nanoparticles at the LCST transition. Single nanoparticles do not aggregate with the temperature increase. The thermally induced collapse of end-grafted poly(N-isopropylacrylamide) chains above the LCST do not affect significantly the size characteristics of silver nanoparticles incorporated into the polymer matrix.

Synthesis of Novel pH-Tunable Thermoresponsive Hydroxyl-Terminated Hyperbranched Polyether

In this study, a new pH-tunable thermoresponsive hydroxyl-terminated hyperbranched polyether (HTHP 2) was successfully prepared via a one-pot cationic polymerization technique and postmodification. In the first step, hydroxyl-terminated hyperbranched polyether containing double bonds (HTHP 1) were synthesized. Then, through thiol-ene "click" reaction, pH-responsive carboxyl groups were introduced to the target polymer of HTHP 2. The products were characterized via Fourier-transform infrared spectra (FTIR), nuclear magnetic resonance (NMR), and size-exclusion chromatography-multiangle laser light scattering (SEC-MALLS). Moreover, dynamic light scattering (DLS) and UV-Vis spectroscopy was employed to study the pH- and thermoresponsiveness in detail. Results showed that HTHP 2 possessed typical pH-controllable thermoresponsive behavior. By regulating the solution pH value range 3.0-5.4, LCST of HTHP 2 could be changed from 12.8 to 68.0 °C. Meanwhile, the cell viabilities of A549 cells were more than 80% for in vitro cytotoxicity tests of HTHP 2, suggested that HTHP 2 polymers are of good biocompatibility for up to 24 h.

Raman Microspectroscopy Study of the Hydrolytic Degradation of Polyanhydride Network Polymers

Raman microspectroscopy was employed in this work to study the degradation of a polyanhydride network polymer synthesized from 4-pentenoic anhydride and pentaerythritol tetrakis(3-mercaptopropionate) monomers in order to illustrate the utility of this method and improve the understanding of the polyanhydride degradation and erosion. Disk-shaped polymer samples were immersed in buffer solutions for different periods of time, and hydrolytic degradation was monitored spatially and temporally via kinetic Raman studies at various depths of penetration into the samples. Erosion, meanwhile, was monitored via mass loss measurements. Dispersive Raman microspectroscopy is shown to be a particularly valuable tool for the study of the hydrolytic degradation of these materials. It confirms that these thiol-ene polyanhydrides are indeed surface eroding, while also revealing that degradation starts to occur at the core of samples on a short time scale (less than 5 h). At any given degradation time, there is a concentration gradient of the unreacted anhydride, with the unreacted anhydride concentration increasing from the outer edge to the center of the polymer samples. Further, the anhydride functionality is found to decrease approximately linearly with degradation time at all depths in the samples, though the degradation rate does appear to increase slightly as degradation occurs.

3D printing approaches for cardiac tissue engineering and role of immune modulation in tissue regeneration

Conventional tissue engineering, cell therapy, and current medical approaches were shown to be successful in reducing mortality rate and complications caused by cardiovascular diseases (CVDs). But still they have many limitations to fully manage CVDs due to complex composition of native myocardium and microvascularization. Fabrication of fully functional construct to replace infarcted area or regeneration of progenitor cells is important to address CVDs burden. Three-dimensional (3D) printed scaffolds and 3D bioprinting technique have potential to develop fully functional heart construct that can integrate with native tissues rapidly. In this review, we presented an overview of 3D printed approaches for cardiac tissue engineering, and advances in 3D bioprinting of cardiac construct and models. We also discussed role of immune modulation to promote tissue regeneration.

Hyperbranched Polycaprolactone through RAFT Polymerization of 2-Methylene-1,3-dioxepane

Hyperbranched polycaprolactone with controlled structure was synthesized by reversible addition-fragmentation chain transfer radical ring-opening polymerization along with self-condensed vinyl polymerization (SCVP) of 2-methylene-1,3-dioxepane (MDO). Vinyl 2-[(ethoxycarbonothioyl) sulfanyl] propanoate (ECTVP) was used as polymerizable chain transfer agent. Living polymerization behavior was proved via pseudo linear kinetics, the molecular weight of polymers increasing with conversion and successful chain extension. The structure of polymers was characterized by ¹H NMR spectroscopy, tripe detection gel permeation chromatography, and differential scanning calorimetry. The polymer composition was shown to be able to tune to vary the amount of ester repeat units in the polymer backbone, and hence determine the degree of branching. As expected, the degree of crystallinity was lower and the rate of degradation was faster in cases of increasing the number of branches.

A Standardized Collagen-Based Scaffold Improves Human Hepatocyte Shipment and Allows Metabolic Studies over 10 Days

Due to pronounced species differences, hepatotoxicity of new drugs often cannot be detected in animal studies. Alternatively, human hepatocytes could be used, but there are some limitations. The cells are not always available on demand or in sufficient amounts, so far there has been only limited success to allow the transport of freshly isolated hepatocytes without massive loss of function or their cultivation for a long time. Since it is well accepted that the cultivation of hepatocytes in 3D is related to an improved function, we here tested the Optimaix-3D Scaffold from Matricel for the transport and cultivation of hepatocytes. After characterization of the scaffold, we shipped cells on the scaffold and/or cultivated them over 10 days. With the evaluation of hepatocyte functions such as urea production, albumin synthesis, and CYP activity, we showed that the metabolic activity of the cells on the scaffold remained nearly constant over the culture time whereas a significant decrease in metabolic activity occurred in 2D cultures. In addition, we demonstrated that significantly fewer cells were lost during transport. In summary, the collagen-based scaffold allows the transport and cultivation of hepatocytes without loss of function over 10 days.

It's All in the Delivery: Designing Hydrogels for Cell and Non-viral Gene Therapies

Hydrogels provide a regenerative medicine platform with their ability to create an environment that supports transplanted or endogenous infiltrating cells and enables these cells to restore or replace the function of tissues lost to disease or trauma. Furthermore, these systems have been employed as delivery vehicles for therapeutic genes, which can direct and/or enhance the function of the transplanted or endogenous cells. Herein, we review recent advances in the development of hydrogels for cell and non-viral gene delivery through understanding the design parameters, including both physical and biological components, on promoting transgene expression, cell engraftment, and ultimately cell function. Furthermore, this review identifies emerging opportunities for combining cell and gene delivery approaches to overcome challenges to the field.

Thermogelling, ABC Triblock Copolymer Platform for Resorbable Hydrogels with Tunable, Degradation-Mediated Drug Release

Clinical application of injectable, thermoresponsive hydrogels is hindered by lack of degradability and controlled drug release. To overcome these challenges, a family of thermoresponsive, ABC triblock polymer-based hydrogels has been engineered to degrade and release drug cargo through either oxidative or hydrolytic/enzymatic mechanisms dictated by the "A" block composition. Three ABC triblock copolymers are synthesized with varying "A" blocks, including oxidation-sensitive poly(propylene sulfide), slow hydrolytically/enzymatically degradable poly(ε-caprolactone), and fast hydrolytically/enzymatically degradable poly(D,L-lactide-co-glycolide), forming the respective formulations PPS135-b-PDMA152-b-PNIPAAM225 (PDN), PCL85-b-PDMA150-b-PNIPAAM150 (CDN), and PLGA60-b-PDMA148-b-PNIPAAM152 (LGDN). For all three polymers, hydrophilic poly(N,N-dimethylacrylamide) and thermally responsive poly(N-isopropylacrylamide) comprise the "B" and "C" blocks, respectively. These copolymers form micelles in aqueous solutions at ambient temperature that can be preloaded with small molecule drugs. These solutions quickly transition into hydrogels upon heating to 37 °C, forming a supra-assembly of physically crosslinked, drug-loaded micelles. PDN hydrogels are selectively degraded under oxidative conditions while CDN and LGDN hydrogels are inert to oxidation but show differential rates of hydrolytic/enzymatic decomposition. All three hydrogels are cytocompatible in vitro and in vivo, and drug-loaded hydrogels demonstrate differential release kinetics in vivo corresponding with their specific degradation mechanism. These collective data highlight the potential cell and drug delivery use of this tunable class of ABC triblock polymer thermogels.

Multiple-Level Porous Polymer Monoliths with Interconnected Cellular Topology Prepared by Combining Hard Sphere and Emulsion Templating for Use in Bone Tissue Engineering

A combination of hard sphere and high internal phase emulsion templating gives a platform for synthesizing hierarchically porous polymers with a unique topology exhibiting interconnected spherical features on multiple levels. Polymeric spheres are fused by thermal sintering to create a 3D monolithic structure while an emulsion with a high proportion of internal phase and monomers in the continuous phase is added to the voids of the previously constructed monolith. Following polymerization of the emulsion and dissolution of the templating structure, a down-replicating topology is created with a primary level of pores as a result of fused spheres of the 3D monolithic structure, a secondary level of pores resulting from the emulsion's internal phase, and a tertiary level of interconnecting channels. Thiol-ene chemistry with divinyladipate and pentaerythritol tetrakis(3-mercaptopropionate) is used to demonstrate the preparation of a crosslinked polyester with overall porosity close to 90%. Due to multilevel porosity, such materials are interesting for applications in bone tissue engineering, possibly simulating the native sponge like bone structure. Their potential to promote ossteointegration is tested using human bone derived osteoblasts. Material-cell interactions are evaluated and they reveal growth and proliferation of osteoblasts both on surface and in the bulk of the scaffold.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Electrochemical preparation and characterization of PNIPAM-HAp scaffolds for bone tissue engineering

In the last decade, a variety of methods for fabrication of three-dimensional biomimetic scaffolds based on hydrogels have been developed for tissue engineering. However, many methods require the use of catalysts which compromises the biocompatibility of the scaffolds. The electrochemical polymerization (ECP) of acrylic monomers has received an increased attention in recent years due to its versatility in the production of highly biocompatible coatings for the electrodes used in medical devices. The main aim of this work was the use of ECP as scaffold fabrication technique to produce highly porous poly(N-isopropylacrylamide) (PNIPAM)/hydroxyapatite (HAp) composite for bone tissue regeneration. The prepared PNIPAM-HAp porous scaffolds were characterized by SEM, FTIR, water swelling, porosity measurements and X-ray diffraction (XRD) techniques. FTIR indicates that ECP promotes a successful conversion of NIPAM to PNIPAM. The water swelling and porosity were shown to be controlled by the HAp content in PNIPAM-HAp scaffolds. The PNIPAM-HAp scaffolds exhibited no cytotoxicity to MG63 cells, showing that ECP are potentially useful for the production of PNIPAM-HAp scaffolds. To address the osteomyelitis, a significant complication in orthopedic surgeries, PNIPAM-HAp scaffolds were loaded with the antibiotic oxacillin. The oxacillin release and the bacterial killing activity of the released oxacillin from PNIPAM-HAp against S. aureus and P. aeruginosa were demonstrated. These observations demonstrate that ECP are promising technique for the production of non-toxic, biocompatible PNIPAM-HAp scaffolds for tissue engineering.