Synthesis of Biodegradable and Electroactive Tetraaniline Grafted Poly(ester amide) Copolymers for Bone Tissue Engineering

Evaluation of the effect of co-transplantation of collagen-hydroxyapatite bio-scaffold containing nanolycopene and human endometrial mesenchymal stem cell derived exosomes to regenerate bone in rat critical size calvarial defect

This study aimed to evaluate the effect of nanoparticles based on the PLGA and biomolecule of lycopene (i.e. NLcp) and exosomes loaded on hydroxyapatite/collagen-based scaffolds (HA/Coll), on human endometrial MSCs (hEnMSCs) differentiation into osteoblast cells. To this end, after synthesizing NLcp and isolating hEnMSC-derived exosomes, and studying their characterizations, HA/Coll scaffold with/without NLcp and exosome was fabricated. In following, the rat skull-defect model was created on 54 male Sprague-Dawley rats (12 weeks old) which were classified into 6 groups [control group (4 healthy rats), negative control group: bone defect without grafting (10 rats), and experimental groups including bone defect grafted with HA/Coll scaffold (10 rats), HA/Coll/NLcp scaffold (10 rats), HA/Coll scaffold + exosome (10 rats), and HA/Coll-NLcp scaffold + exosome (10 rats)]. Finally, the grafted membrane along with its surrounding tissues was removed at 90 days after surgery, to assess the amount of defect repair by Hematoxylin and eosin staining. Moreover, immunohistochemical and X-ray Micro-Computed Tomography (Micro-CT) analyses were performed to assess osteocalcin and mean bone volume fraction (BVF). Based on the results, although, the existence of the exosome in the scaffold network can significantly increase mean BVF compared to HA/Coll scaffold and HA/Coll-NLcp scaffold (2.25-fold and 1.5-fold, respectively). However, the combination of NLcp and exosome indicated more effect on mean BVF; so that the HA/Coll-NLcp scaffold + exosome led to a 15.95 % increase in mean BVF than the HA/Coll scaffold + exosome. Hence, synthesized NLcp in this study can act as a suitable bioactive to stimulate the osteogenic, promotion of cell proliferation and its differentiation when used in the polymer scaffold structure or loaded into polymeric carriers containing the exosome.

Conductive hydrogels based on tragacanth and silk fibroin containing dopamine functionalized carboxyl-capped aniline pentamer: Merging hemostasis, antibacterial, and anti-oxidant properties into a multifunctional hydrogel for burn wound healing

Hydrogels possessing both conductive characteristics and notable antibacterial and antioxidant properties hold considerable significance within the realm of wound healing and recovery. The object of current study is the development of conductive hydrogels with antibacterial and antioxidant properties, emphasizing their potential for effective wound healing, especially in treating third-degree burns. For this purpose, various conductive hydrogels are developed based on tragacanth and silk fibroin, with variable dopamine functionalized carboxyl-capped aniline pentamer (CAP@DA). The FTIR analysis confirms that the CAP powder was successfully synthesized and modified with DA. The results show that the incorporation of CAP@DA into hydrogels can increase the porosity and swellability of the hydrogels. Additionally, the mechanical and viscoelastic properties of the hydrogels are also improved. The release of vancomycin from the hydrogels is sustained over time, and the hydrogels are effective in inhibiting the growth of Methicillin-resistant Staphylococcus aureus (MRSA). In vitro cell studies of the hydrogels show that all hydrogels are biocompatible and support cell attachment. The hydrogels' tissue adhesiveness yielded a satisfactory hemostatic outcome in a rat-liver injury model. The third-degree burn was created on the dorsal back paravertebral region of the rats and then grafted with hydrogels. The burn was monitored for 3, 7, and 14 days to evaluate the efficacy of the hydrogel in promoting wound healing. The hydrogels revealed treatment effect, resulting in enhancements in wound closure, dermal collagen matrix production, new blood formation, and anti-inflammatory properties. Better results were obtained for hydrogel with increasing CAP@DA. In summary, the multifunctional conducive hydrogel, featuring potent antibacterial properties, markedly facilitated the wound regeneration process.

Recent advances of responsive scaffolds in bone tissue engineering

The investigation of bone defect repair has been a significant focus in clinical research. The gradual progress and utilization of different scaffolds for bone repair have been facilitated by advancements in material science and tissue engineering. In recent times, the attainment of precise regulation and targeted drug release has emerged as a crucial concern in bone tissue engineering. As a result, we present a comprehensive review of recent developments in responsive scaffolds pertaining to the field of bone defect repair. The objective of this review is to provide a comprehensive summary and forecast of prospects, thereby contributing novel insights to the field of bone defect repair.

Facile fabrication of biocompatible injectable blended polymeric hydrogel with bioactive nanoformulation to improving cardiac tissue regeneration efficiency after myocardial infarction for nursing care potential applications

Recent years, cardiac vascular disease has arisen owing to acute myocardial infarction (MI) and heart failure leading to death worldwide. Various treatments are available for MI in modern medicine such as implantation of devices, pharmaceutical therapy, and transplantation of organs, nonetheless, it has many complications in finding an organ donor, devices for stenosis, high intrusiveness and long-time hospitalization. To overcome these problems, we have designed and developed a novel hydrogel material with a combination of Se NPs loaded poly(ethylene glycol)/tannic acid (PEG/TA) hydrogel for the treatment of acute MI repair. Herein, Se NPs were characterized by effective analytical and spectroscopic techniques. In vitro cell compatibility and anti-oxidant analyses were examined on human cardiomyocytes in different concentrations of Se NPs and appropriate Se NPs loaded hydrogel samples to demonstrate its greater suitability for in vivo cardiac applications. In vivo investigations of MI mice models injected with Se hydrogels established that LV wall thickness was conserved significantly from the value of 235.6 µm to 390 µm. In addition, the relative scar thickness (33.6%) and infarct size (17.1%) of the MI model were enormously reduced after injection of Se hydrogel when compared to the Se NPs and control (MI) sample, respectively, which confirmed that Se introduced hydrogel have greatly influenced on the restoration of the infarcted heart. Based on the investigated results of the nanoformulation samples, it could be a promising material for future generations treatment of acute myocardial infarction and cardiac repair applications.

Toward Sustainable Wearable Electronic Textiles

Smart wearable electronic textiles (e-textiles) that can detect and differentiate multiple stimuli, while also collecting and storing the diverse array of data signals using highly innovative, multifunctional, and intelligent garments, are of great value for personalized healthcare applications. However, material performance and sustainability, complicated and difficult e-textile fabrication methods, and their limited end-of-life processability are major challenges to wide adoption of e-textiles. In this review, we explore the potential for sustainable materials, manufacturing techniques, and their end-of-the-life processes for developing eco-friendly e-textiles. In addition, we survey the current state-of-the-art for sustainable fibers and electronic materials (i.e., conductors, semiconductors, and dielectrics) to serve as different components in wearable e-textiles and then provide an overview of environmentally friendly digital manufacturing techniques for such textiles which involve less or no water utilization, combined with a reduction in both material waste and energy consumption. Furthermore, standardized parameters for evaluating the sustainability of e-textiles are established, such as life cycle analysis, biodegradability, and recyclability. Finally, we discuss the current development trends, as well as the future research directions for wearable e-textiles which include an integrated product design approach based on the use of eco-friendly materials, the development of sustainable manufacturing processes, and an effective end-of-the-life strategy to manufacture next generation smart and sustainable wearable e-textiles that can be either recycled to value-added products or decomposed in the landfill without any negative environmental impacts.

Structural and biological engineering of 3D hydrogels for wound healing

Chronic wounds have become one of the most important issues for healthcare systems and are a leading cause of death worldwide. Wound dressings are necessary to facilitate wound treatment. Engineering wound dressings may substantially reduce healing time, reduce the risk of recurrent infections, and reduce the disability and costs associated. In the path of engineering of an ideal wound dressing, hydrogels have played a leading role. Hydrogels are 3D hydrophilic polymeric structures that can provide a protective barrier, mimic the native extracellular matrix (ECM), and provide a humid environment. Due to their advantages, hydrogels (with different architectural, physical, mechanical, and biological properties) have been extensively explored as wound dressing platforms. Here we describe recent studies on hydrogels for wound healing applications with a strong focus on the interplay between the fabrication method used and the architectural, mechanical, and biological performance achieved. Moreover, we review different categories of additives which can enhance wound regeneration using 3D hydrogel dressings. Hydrogel engineering for wound healing applications promises the generation of smart solutions to solve this pressing problem, enabling key functionalities such as bacterial growth inhibition, enhanced re-epithelialization, vascularization, improved recovery of the tissue functionality, and overall, accelerated and effective wound healing.

Construction of enzyme-laden vascular scaffolds based on hyaluronic acid oligosaccharides-modified collagen nanofibers for antithrombosis and in-situ endothelialization of tissue-engineered blood vessels

The current use of synthetic grafts often yields low patency in the reconstruction of small-diameter blood vessels owing to the deposition of thrombi and imperfect coverage of the endothelium on the graft lumen. Therefore, the design of vascular scaffolds with antithrombotic performance and endothelialization is greatly required. Herein, we developed an enzyme-laden scaffold based on hyaluronic acid oligosaccharides-modified collagen nanofibers (labeled HA-COL) to improve the anti-platelet capacity and endothelialization of vascular grafts. In this study, HA-COL nanofibers not only encouraged the endothelialization of vascular scaffolds, but acted as an antiplatelet enzyme-laden platform. Apyrase (Apy) and 5'-nucleotidase (5'-NT) were covalently grafted onto the nanofibers, which in turn converted the platelet-sensitive substance: adenosine diphosphate (ADP) into adenosine monophosphate (AMP) and adenosine, thereby, improving the antithrombotic performance of the scaffolds. Notably, the catalytic end-product: adenosine would work in coordination with HA-COL to synergistically enhance the endothelialization of the vascular scaffolds. The results demonstrated that the enzyme-laden scaffolds maintained catalytic performance, reduced platelet adhesion and aggregation, and guaranteed higher patency after 1-month in situ transplantation. Moreover, these scaffolds showed optimal cytocompatibility, tissue compatibility, scaffold biodegradability and tissue regenerative capability during in vivo implantation. Overall, these engineered vascular scaffolds demonstrated their capacity for endothelialization and antithrombotic performance, suggesting their potential for small-diameter vascular tissue engineering applications. STATEMENT OF SIGNIFICANCE: Considering the critical problems in small-diameter vascular reconstruction, the enzyme-laden vascular scaffolds were prepared for improving in-situ endothelialization and antithrombotic performances of artificial blood vessels. The electrospun HA-COL nanofibers were used as the main matrix materials, which provided favorable structural templates for the regeneration of vasculature and functioned as a platform for the loading of enzymes. The enzyme-laden scaffolds with the biomimetic cascading reaction would convert ADP into adenosine, thereby, decreasing the sensitivity of platelets and improving the antithrombotic performance of tissue-engineered blood vessels (TEBVs). The nanofibrous scaffolds exhibited optimal cytocompatibility, tissue compatibility and regenerative capability, working together with catalytic products of dual-enzyme reaction that would synergistically contribute to TEBVs endothelialization. This study provides a new method for the improvement of in-situ endothelialization of small-diameter TEBVs while qualified with antithrombotic performance.

Polyurethane and polyurethane/hydroxyapatite scaffold in a three-dimensional culture system

Designing a new scaffold with an optimal ability of osteogenesis differentiation is a significant step bone tissue engineering along with the growing demands for bone craft in recent decades. Herein, we used Polyurethane (PU), a novel biocompatible and flexible polymer, and Hydroxyapatite (HA), the major component of human hard tissues matrix for developing new scaffolds and analyzing the in vitro osteogenic differentiation potential of human adipose-derived mesenchymal stem cells (Ad-MSCs) in basal and induction media. Gene expression analysis was performed to evaluate the expression level of four osteogenic differentiation genes. MTT assays were also done to assess the attachment and proliferation of the cells after 7 and 21 days of seeding to scaffolds. The expression level of RUNX2 was increased in seeded cells on PU/HA scaffolds compared with the PU. Cellular adhesion and proliferation of the Ad-MSCs were higher in PU/HA than PU scaffolds according to the histology analysis. The PU and PU/HA scaffolds supported the attachment, proliferation, and differentiation of Ad-MSCs, and they are suitable candidates for producing constructs in bone regeneration. However, further in-vitro and in-vivo studies on these scaffolds are needed to introduce an appropriate candidate for clinical bone regeneration.

Recent Advances of Poly(ester amide)s-Based Biomaterials

Biodegradable and biocompatible biomaterials have offered much more opportunities from an engineering standpoint for treating diseases and maintaining health. Poly(ester amide)s (PEAs), as an outstanding family among such biomaterials, have risen overwhelmingly in the past decades. These synthetic polymers have easily and widely available raw materials and a diversity of synthetic approaches, which have attracted considerable attention. More importantly, combining the superiorities of polyamides and polyesters, PEAs have emerged with better functions. They could have improved biodegradability, biocompatibility, and cell-material interactions. The PEAs derived from α-amino acids even allow the introduction of pendant sites for further modification or functionalization. Meanwhile, it is gradually recognized that the chemical structures are closely related to the physiochemical and biological properties of PEAs so that their properties can be precisely controlled. PEAs therefore become significant materials in the biomedical fields. This review will attempt to summarize the recent progress in the development of PEAs with respect to the preparation materials and methods, structure-property relationships along with their latest biomedical accomplishments, especially for drug delivery and tissue engineering.

3D-printed antioxidant antibacterial carboxymethyl cellulose/ε-polylysine hydrogel promoted skin wound repair

Developing a wound dressing for the treatment of large and irregular-shaped wounds remains a great challenge. Herein we developed novel printable bionic hydrogels with antibacterial and antioxidant properties which could effectively overcome the challenge by inhibiting inflammation and accelerating wound healing. The CMC/PL (CP) hydrogels were customized with glycidyl methacrylate (GMA) modified carboxymethyl cellulose (CMC) and ε-polylysine (ε-PL) via ultraviolet (UV) light polymerization using a 3D printer. Except for the high compression modulus (238 kPa), stable rheological properties, and effective degradability, these CP hydrogels also had an excellent inhibitory effect (95%) on both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Remarkably, CP hydrogels could remove the excessive reactive oxygen species (ROS) and protect the fibroblasts from damage. Compared with the commercial dressing (Tegaderm ™ film), CP hydrogels showed a better ability to increase the expression of VEGF and CD31, accelerate granulation tissue regeneration, and promote wound healing. This work provides a new strategy to fabricate on-demand multi-functional hydrogels in the field of skin tissue engineering.

Biodegradable aniline-derived electroconductive film for the regulation of neural stem cell fate

Neural stem cells (NSCs) represent significant potential and promise in the treatment of neurodegenerative diseases and nerve injuries. An efficient methodology or platform that can help in specifically directing the stem cell fate is important and highly desirable for future clinical therapy. In this study, a biodegradable electrical conductive film composed of an oxidative polymerized carboxyl-capped aniline pentamer (CCAP) and ring-opening polymerized tetra poly(d,l-lactide) (4a-PLA) was designed with the addition of the dopant, namely chondroitin sulfate. This conductive film acts as a biological substrate for the exogenous/endogenous electric field transmission in tissue, resulting in the control of NSC fate, as well as improvement in neural tissue regeneration. The results show that CCAP is successfully synthesized and then conjugated onto 4a-PLA to form a network structure with electrical conductivity, cell adhesion capacity, and biodegradability. The neuronal differentiation of NSCs can be induced on 4a-PLAAP, and the neuronal maturation process can be facilitated by the manipulation of the electrical field. This biocompatible and electroactive material can serve as a platform to determine the cell fate of NSCs and be employed in neural regeneration. For future perspectives, its promising performance shows potential in applications, such as electrode-tissue integration interfaces, coatings on neuroprosthetics devices and neural probes, and smart drug delivery system in neurological systems.

Porous Electroactive and Biodegradable Polyurethane Membrane through Self-Doping Organogel

In order to improve the processability of conductive polyurethane (CPU) containing aniline oligomers, a new CPU containing aniline trimer (AT) and l-lysine (PUAT) are designed and synthesized. Further, the 3D porous PUAT membranes have been prepared by a simple gel cooperated with freeze-drying method. Chemical testings and conductive properties testify a self- doping model of PUAT based on the rich electronic l-lysine and electroaffinity AT moities. The self-doping behavior further endows the PUAT copolymers specific characteristics such as high electrical conductivity and the formation of the polaron lattice like-structure in good solvent dimethyl sulfoxide. The combination of organogel and freeze-drying could prevent the collapse of pore structure when the copolymers are molded as membranes. The synergistic effect of l-lysine and AT components has a strong influence on the dissolution, degradation, thermal stability, and mechanical properties of PUAT. The excellent properties of PUAT would broad the application of conductive polymers in biomedicine field.

Biodegradable Materials for Sustainable Health Monitoring Devices

The recent advent of biodegradable materials has offered huge opportunity to transform healthcare technologies by enabling sensors that degrade naturally after use. The implantable electronic systems made from such materials eliminate the need for extraction or reoperation, minimize chronic inflammatory responses, and hence offer attractive propositions for future biomedical technology. The eco-friendly sensor systems developed from degradable materials could also help mitigate some of the major environmental issues by reducing the volume of electronic or medical waste produced and, in turn, the carbon footprint. With this background, herein we present a comprehensive overview of the structural and functional biodegradable materials that have been used for various biodegradable or bioresorbable electronic devices. The discussion focuses on the dissolution rates and degradation mechanisms of materials such as natural and synthetic polymers, organic or inorganic semiconductors, and hydrolyzable metals. The recent trend and examples of biodegradable or bioresorbable materials-based sensors for body monitoring, diagnostic, and medical therapeutic applications are also presented. Lastly, key technological challenges are discussed for clinical application of biodegradable sensors, particularly for implantable devices with wireless data and power transfer. Promising perspectives for the advancement of future generation of biodegradable sensor systems are also presented.

Mimicking the electrophysiological microenvironment of bone tissue using electroactive materials to promote its regeneration

The process of bone tissue repair and regeneration is complex and requires a variety of physiological signals, including biochemical, electrical and mechanical signals, which collaborate to ensure functional recovery. The inherent piezoelectric properties of bone tissues can convert mechanical stimulation into electrical effects, which play significant roles in bone maturation, remodeling and reconstruction. Electroactive materials, including conductive materials, piezoelectric materials and electret materials, can simulate the physiological and electrical microenvironment of bone tissue, thereby promoting bone regeneration and reconstruction. In this paper, the structures and performances of different types of electroactive materials and their applications in the field of bone repair and regeneration are reviewed, particularly by providing the results from in vivo evaluations using various animal models. Their advantages and disadvantages as bone repair materials are discussed, and the methods for tuning their performances are also described, with the aim of providing an up-to-date account of the proposed topics.

Nanostructured Biomaterials for Bone Regeneration

This review article addresses the various aspects of nano-biomaterials used in or being pursued for the purpose of promoting bone regeneration. In the last decade, significant growth in the fields of polymer sciences, nanotechnology, and biotechnology has resulted in the development of new nano-biomaterials. These are extensively explored as drug delivery carriers and as implantable devices. At the interface of nanomaterials and biological systems, the organic and synthetic worlds have merged over the past two decades, forming a new scientific field incorporating nano-material design for biological applications. For this field to evolve, there is a need to understand the dynamic forces and molecular components that shape these interactions and influence function, while also considering safety. While there is still much to learn about the bio-physicochemical interactions at the interface, we are at a point where pockets of accumulated knowledge can provide a conceptual framework to guide further exploration and inform future product development. This review is intended as a resource for academics, scientists, and physicians working in the field of orthopedics and bone repair.

Three dimensional printed degradable and conductive polymer scaffolds promote chondrogenic differentiation of chondroprogenitor cells

We report a conductive and biodegradable 3D printed polymer scaffold that promotes chondrogenic differentiation of chondroprogenitor cells. The conductive material consists of tetraniline-b-polycaprolactone-b-tetraaniline and polycaprolactone.

A micropatterned conductive electrospun nanofiber mesh combined with electrical stimulation for synergistically enhancing differentiation of rat neural stem cells

The micropatterned conductive nanofiber mesh combined with ES effectively facilitates the differentiation of NSCs into neuron and suppresses the formation of astrocytes.

Mussel-Inspired Conducting Copolymer with Aniline Tetramer as Intelligent Biological Adhesive for Bone Tissue Engineering

Electrically conducting polymers have been emerging as intelligent bioactive materials for regulating cell behaviors and bone tissue regeneration. Additionally, poor adhesion between conventional implants and native bone tissue may lead to displacement, local inflammation, and unnecessary secondary surgery. Thus, a conductive bioadhesive with strong adhesion performance provides an effective approach to fulfill fixation and regeneration of comminuted bone fracture. Inspired by mussel chemistry, we designed the conductive copolymers poly{[aniline tetramer methacrylamide]-co-[dopamine methacrylamide]-co-[poly(ethylene glycol) methyl ether methacrylate]} [poly(ATMA-co-DOPAMA-co-PEGMA); AT:conductive aniline tetramer; DOPA:dopamine; PEG:poly(ethylene glycol))] with AT content 3.0, 6.0, and 9.0 mol %, respectively. The adhesive strength of this copolymer was enhanced during tensile process perhaps due to the synergistic effects of H-bonding, π-π interactions, and polymer long-chain entanglement, reaching up to 1.28 MPa with 6 mol % AT. Biological characterizations of preosteoblasts indicated that the bioadhesives exhibited desirable biocompatibility. In addition, the osteogenic differentiation was synergistically enhanced by the conductive substrate and electrical stimulation with a square wave, frequency of 100 Hz, 50% duty cycle, and electrical potential of 500 mV, as indicated by ALP activity, calcium deposition, and expression of osteogenic genes. The ALP activity at 14 days and calcium deposition at 28 days on the 9 mol % AT group were significantly higher than that on PLGA under electrical stimulation. The expression value of OPN for 9 mol % AT group was notably upregulated by 5.9-fold compared with PLGA at 7 days under electrical stimulation. Overall, the conductive polymers with strong adhesion can synergistically upregulate the cellular activity combining with electrical stimulation and might be a promising bioadhesive for orthopedic and dental applications.

Electrically Conductive Materials: Opportunities and Challenges in Tissue Engineering

Tissue engineering endeavors to regenerate tissues and organs through appropriate cellular and molecular interactions at biological interfaces. To this aim, bio-mimicking scaffolds have been designed and practiced to regenerate and repair dysfunctional tissues by modifying cellular activity. Cellular activity and intracellular signaling are performances given to a tissue as a result of the function of elaborated electrically conductive materials. In some cases, conductive materials have exhibited antibacterial properties; moreover, such materials can be utilized for on-demand drug release. Various types of materials ranging from polymers to ceramics and metals have been utilized as parts of conductive tissue engineering scaffolds, having conductivity assortments from a range of semi-conductive to conductive. The cellular and molecular activity can also be affected by the microstructure; therefore, the fabrication methods should be evaluated along with an appropriate selection of conductive materials. This review aims to address the research progress toward the use of electrically conductive materials for the modulation of cellular response at the material-tissue interface for tissue engineering applications.

Poly (lactic-co-glycolic acid)/graphene oxide composites combined with electrical stimulation in wound healing: preparation and characterization

PURPOSE

In this study, we fabricated multifunctional, electrically conductive composites by incorporating graphene oxide (GO) into a poly (lactic-co-glycolic acid) (PLGA) copolymer for wound repair. Furthermore, the resultant composites were coupled with electrical stimulation to further improve the therapeutic effect of wound repair.

METHODS

We evaluated the surface morphology of the composites, as well as their physical properties, cytotoxicity, and antibacterial activity, along with the combined effects of composites and electrical stimulation (ES) in a rat model of wound healing.

RESULTS

Application of the PLGA/GO composites to full-thickness wounds confirmed their advantageous biological properties, as evident from the observed improvements in wound-specific mechanical properties, biocompatibility, and antibacterial activity. Additionally, we found that the combination of composites and ES improved composite-mediated cell survival and accelerated wound healing in vivo by promoting neovascularization and the formation of type I collagen.

CONCLUSION

These results demonstrated that combined treatment with the PLGA/GO composite and ES promoted vascularization and epidermal remodeling and accelerated wound healing in rats, thereby suggesting the efficacy of PLGA/GO+ES for broad applications associated with wound repair.

A review of using green chemistry methods for biomaterials in tissue engineering

Although environmentally safe, or green, technologies have revolutionized other fields (such as consumables, automobiles, etc.), its use in biomaterials is still at its infancy. However, in the few cases in which safe manufacturing technology and materials have been implemented to prevent postpollution and reduce the consumption of synthesized scaffold (such as bone, cartilage, blood cell, nerve, skin, and muscle) has had a significant impact on different applications of tissue engineering. In the present research, we report the use of biological materials as templates for preparing different kinds of tissues and the application of safe green methods in tissue engineering technology. These include green methods for bone and tissue engineering-based biomaterials, which have received the greatest amount of citations in recent years. Thoughts on what is needed for this field to grow are also critically included. In this paper, the impending applications of safe, ecofriendly materials and green methods in tissue engineering have been detailed.

3D bioprinting for cardiovascular regeneration and pharmacology

Cardiovascular disease (CVD) is a major cause of morbidity and mortality worldwide. Compared to traditional therapeutic strategies, three-dimensional (3D) bioprinting is one of the most advanced techniques for creating complicated cardiovascular implants with biomimetic features, which are capable of recapitulating both the native physiochemical and biomechanical characteristics of the cardiovascular system. The present review provides an overview of the cardiovascular system, as well as describes the principles of, and recent advances in, 3D bioprinting cardiovascular tissues and models. Moreover, this review will focus on the applications of 3D bioprinting technology in cardiovascular repair/regeneration and pharmacological modeling, further discussing current challenges and perspectives.

Conducting Polymers for Tissue Engineering

Electrically conducting polymers such as polyaniline, polypyrrole, polythiophene, and their derivatives (mainly aniline oligomer and poly(3,4-ethylenedioxythiophene)) with good biocompatibility find wide applications in biomedical fields including bioactuators, biosensors, neural implants, drug delivery systems, and tissue engineering scaffolds. This review focuses on these conductive polymers for tissue engineering applications. Conductive polymers exhibit promising conductivity as bioactive scaffolds for tissue regeneration, and their conductive nature allows cells or tissue cultured on them to be stimulated by electrical signals. However, their mechanical brittleness and poor processability restrict their application. Therefore, conductive polymeric composites based on conductive polymers and biocompatible biodegradable polymers (natural or synthetic) were developed. The major objective of this review is to summarize the conductive biomaterials used in tissue engineering including conductive composite films, conductive nanofibers, conductive hydrogels, and conductive composite scaffolds fabricated by various methods such as electrospinning, coating, or deposition by in situ polymerization. Furthermore, recent progress in tissue engineering applications using these conductive biomaterials including bone tissue engineering, muscle tissue engineering, nerve tissue engineering, cardiac tissue engineering, and wound healing application are discussed in detail.

Novel Conducting and Biodegradable Copolymers with Noncytotoxic Properties toward Embryonic Stem Cells

Electroactive biomaterials that are easily processed as scaffolds with good biocompatibility for tissue regeneration are difficult to design. Herein, the synthesis and characterization of a variety of novel electroactive, biodegradable biomaterials based on poly(3,4-ethylenedioxythiphene) copolymerized with poly(d,l lactic acid) (PEDOT-co-PDLLA) are presented. These copolymers were obtained using (2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl)methanol (EDOT-OH) as an initiator in a lactide ring-opening polymerization reaction, resulting in EDOT-PDLLA macromonomer. Conducting PEDOT-co-PDLLA copolymers (in three different proportions) were achieved by chemical copolymerization with 3,4-ethylenedioxythiophene (EDOT) monomers and persulfate oxidant. The PEDOT-co-PDLLA copolymers were structurally characterized by 1H NMR and Fourier transform infrared spectroscopy. Cyclic voltammetry confirmed the electroactive character of the materials, and conductivity measurements were performed via electrochemical impedance spectroscopy. In vitro biodegradability was evaluated using proteinase K over 35 days, showing 29-46% (w/w) biodegradation. Noncytotoxicity was assessed by adhesion, migration, and proliferation assays using embryonic stem cells (E14.tg2a); excellent neuronal differentiation was observed. These novel electroactive and biodegradable PEDOT-co-PDLLA copolymers present surface chemistry and charge density properties that make them potentially useful as scaffold materials in different fields of applications, especially for neuronal tissue engineering.

Oligoaniline-based conductive biomaterials for tissue engineering

The science and engineering of biomaterials have improved the human life expectancy. Tissue engineering is one of the nascent strategies with an aim to fulfill this target. Tissue engineering scaffolds are one of the most significant aspects of the recent tissue repair strategies; hence, it is imperative to design biomimetic substrates with suitable features. Conductive substrates can ameliorate the cellular activity through enhancement of cellular signaling. Biocompatible polymers with conductivity can mimic the cells' niche in an appropriate manner. Bioconductive polymers based on aniline oligomers can potentially actualize this purpose because of their unique and tailoring properties. The aniline oligomers can be positioned within the molecular structure of other polymers, thus painter acting with the side groups of the main polymer or acting as a comonomer in their backbone. The conductivity of oligoaniline-based conductive biomaterials can be tailored to mimic the electrical and mechanical properties of targeted tissues/organs. These bioconductive substrates can be designed with high mechanical strength for hard tissues such as the bone and with high elasticity to be used for the cardiac tissue or can be synthesized in the form of injectable hydrogels, particles, and nanofibers for noninvasive implantation; these structures can be used for applications such as drug/gene delivery and extracellular biomimetic structures. It is expected that with progress in the fields of biomaterials and tissue engineering, more innovative constructs will be proposed in the near future. This review discusses the recent advancements in the use of oligoaniline-based conductive biomaterials for tissue engineering and regenerative medicine applications.

STATEMENT OF SIGNIFICANCE

The tissue engineering applications of aniline oligomers and their derivatives have recently attracted an increasing interest due to their electroactive and biodegradable properties. However, no reports have systematically reviewed the critical role of oligoaniline-based conductive biomaterials in tissue engineering. Research on aniline oligomers is growing today opening new scenarios that expand the potential of these biomaterials from "traditional" treatments to a new era of tissue engineering. The conductivity of this class of biomaterials can be tailored similar to that of tissues/organs. To the best of our knowledge, this is the first review article in which such issue is systematically reviewed and critically discussed in the light of the existing literature. Undoubtedly, investigations on the use of oligoaniline-based conductive biomaterials in tissue engineering need further advancement and a lot of critical questions are yet to be answered. In this review, we introduce the salient features, the hurdles that must be overcome, the hopes, and practical constraints for further development.

Biodegradable Polymeric Materials in Degradable Electronic Devices

Biodegradable electronics have great potential to reduce the environmental footprint of devices and enable advanced health monitoring and therapeutic technologies. Complex biodegradable electronics require biodegradable substrates, insulators, conductors, and semiconductors, all of which comprise the fundamental building blocks of devices. This review will survey recent trends in the strategies used to fabricate biodegradable forms of each of these components. Polymers that can disintegrate without full chemical breakdown (type I), as well as those that can be recycled into monomeric and oligomeric building blocks (type II), will be discussed. Type I degradation is typically achieved with engineering and material science based strategies, whereas type II degradation often requires deliberate synthetic approaches. Notably, unconventional degradable linkages capable of maintaining long-range conjugation have been relatively unexplored, yet may enable fully biodegradable conductors and semiconductors with uncompromised electrical properties. While substantial progress has been made in developing degradable device components, the electrical and mechanical properties of these materials must be improved before fully degradable complex electronics can be realized.

A critical review on the prospect of polyaniline-grafted biodegradable nanocomposite

Among the various electrically conducting polymers, polyaniline (PANI) has gained attentions due to its unique properties and doping chemistry. A number of electrically conducting biodegradable polymers has been synthesized by incorporating a biodegradable content of cellulose, chitin, chitosan, etc. in the matrix of PANI. The hybrid materials are also employed as photocatalysts, antibacterial agents, sensors, fuel cells and as materials in biomedical applications. Furthermore, these biodegradable and biocompatible conducting polymers are employed in tissue engineering, dental implants and targeted drug delivery. This review presents state of the art of PANI based biodegradable polymers along with their synthesis routes and unique applications in diverse fields. In future, the synthesis of PANI-grafted biodegradable nanocomposite material is expected to open innovative ways for their outstanding applications.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Dopamine-Incorporated Dual Bioactive Electroactive Shape Memory Polyurethane Elastomers with Physiological Shape Recovery Temperature, High Stretchability, and Enhanced C2C12 Myogenic Differentiation

Soft tissue engineering needs elastic biomaterials not only mimicking the elasticity of soft tissue but also possessing multiple bioactivity to promote cell adhesion, proliferation, and differentiation, which still remain ongoing challenges. Herein, we synthesized a series of dopamine-incorporated dual bioactive electroactive shape memory polyurethane elastomers by combining the properties of elastomeric poly(citric acid-co-polycaprolactone) (CA-PCL) polyurethane elastomer, bioactive dopamine (DA), and electroactive aniline hexamer (AH). The chemical structures, electroactivity, conductivity, thermal properties, hydrophilicity and hydration ability, mechanical properties, and degradability of the polyurethane elastomers were systematically characterized. The elastomers showed excellent shape fixity ratio and shape recovery ability under physiological conditions. The elastomers' elongation and stress were tailored by the AH content, whereas the hydrophilicity and hydration ability of the elastomers were adjusted by the content of DA and AH, as well as the doping state of AH. The viability and proliferation results of C2C12 cells seeded on the elastomers showed their excellent cytocompatibility. Additionally, by analyzing the protein and gene level, the promotion effect on myogenic differentiation of C2C12 cells by these elastomers compared to that by control groups (PCL80 000, CA-PCL elastomer, and CA-PCL elastomer with the DA segment) was demonstrated. Furthermore, the results from subcutaneous implantation confirmed the elastomers' mild host response in vivo. These results represent that these dopamine-incorporated dual bioactive electroactive shape memory polyurethane elastomers are promising candidates for soft tissue regeneration that is sensitive to electrical signals.

Electrospun aniline-tetramer-co-polycaprolactone fibres for conductive, biodegradable scaffolds

Conjugated polymers have been proposed as promising materials for scaffolds in tissue engineering applications. The restricted processability and biodegradability of conjugated polymers limit their use for biomedical applications however. Here we synthesised a block-co-polymer of aniline tetramer and PCL (AT-PCL), and processed it into fibrous non-woven scaffolds by electrospinning. We showed that fibronectin (Fn) adhesion was dependant on the AT-PCL oxidative state, with a reduced Fn unfolding length on doped membranes. Furthermore, we demonstrated the cytocompatibility and potential of these membranes to support the growth and osteogenic differentiation of MC3T3-E1 over 21 days.

Poly(α-hydroxy acid)s and poly(α-hydroxy acid-co-α-amino acid)s derived from amino acid

Polyesters derived from the α-hydroxy acids, lactic acid, and glycolic acid, are the most common biodegradable polymers in clinical use. These polymers have been tailored for a range of applications that require a physical material possessing. The physical and mechanical properties of these polymers fit the specific application and also safely biodegrade. These polymers are hydrophobic and do not possess functional side groups. This does not allow hydrophilic or hydrophobic manipulation, conjugation of active agents along the polymer chain, etc. These manipulations have partly been achieved by block copolymerization with, for example, poly(ethylene glycol), to obtain an amphiphilic copolymer. The objective of this review is to survey PLA functional copolymers in which functional α-hydroxy acids derived from amino acids are introduced along the polymer chain, allowing endless manipulation of PLA. Biodegradable functional polyesters are one of the most versatile biomaterials available to biomedical scientists. Amino acids with their variable side chains are ideal candidates for synthesizing such structural as well as stereochemically diverse polymers. They render control over functionalization, conjugation, crosslinking, stimulus responsiveness, and tunable mechanical/thermal properties. Functionalized amino acid derived polyesters are widely used, mainly due to advancement in ring opening polymerization (primarily O-carboxyanhydride mediated). The reaction proceeds under milder conditions and yields high molecular weight polymers. We reviewed on advances in the synthetic methodologies for poly-α-hydroxy esters derived from amino acids with appropriate recent examples.

Receptor-ligand interactions: Advanced biomedical applications

Receptor-ligand interactions (RLIs) are at the base of all biological events occurring in living cells. The understanding of interactions between complementary macromolecules in biological systems represents a high-priority research area in bionanotechnology to design the artificial systems mimicking natural processes. This review summarizes and analyzes RLIs in some cutting-edge biomedical fields, in particular, for the preparation of novel stationary phases to separate complex biological mixtures in medical diagnostics, for the design of ultrasensitive biosensors for identification of biomarkers of various diseases at early stages, as well as in the development of innovative biomaterials and approaches for regenerative medicine. All these biotechnological fields are closely related, because their success depends on a proper choice, combination and spatial disposition of the single components of ligand-receptor pairs on the surface of appropriately designed support.

Poly(ester amide)s: recent insights into synthesis, stability and biomedical applications

Recent progress in polyesteramides, which are important polymers that can combine the properties of polyesters and polyamides, is described with a focus on synthesis and their application as biomaterials.