Electrospinning bioactive supramolecular polymers from water

Manufacturing 3D Biomimetic Tissue: A Strategy Involving the Integration of Electrospun Nanofibers with a 3D-Printed Framework for Enhanced Tissue Regeneration

3D printing and electrospinning are versatile techniques employed to produce 3D structures, such as scaffolds and ultrathin fibers, facilitating the creation of a cellular microenvironment in vitro. These two approaches operate on distinct working principles and utilize different polymeric materials to generate the desired structure. This review provides an extensive overview of these techniques and their potential roles in biomedical applications. Despite their potential role in fabricating complex structures, each technique has its own limitations. Electrospun fibers may have ambiguous geometry, while 3D-printed constructs may exhibit poor resolution with limited mechanical complexity. Consequently, the integration of electrospinning and 3D-printing methods may be explored to maximize the benefits and overcome the individual limitations of these techniques. This review highlights recent advancements in combined techniques for generating structures with controlled porosities on the micro-nano scale, leading to improved mechanical structural integrity. Collectively, these techniques also allow the fabrication of nature-inspired structures, contributing to a paradigm shift in research and technology. Finally, the review concludes by examining the advantages, disadvantages, and future outlooks of existing technologies in addressing challenges and exploring potential opportunities.

Designed peptide amphiphiles as scaffolds for tissue engineering

Peptide amphiphiles (PAs) are peptide-based molecules that contain a peptide sequence as a head group covalently conjugated to a hydrophobic segment, such as lipid tails. They can self-assemble into well-ordered supramolecular nanostructures such as micelles, vesicles, twisted ribbons and nanofibers. In addition, the diversity of natural amino acids gives the possibility to produce PAs with different sequences. These properties along with their biocompatibility, biodegradability and a high resemblance to native extracellular matrix (ECM) have resulted in PAs being considered as ideal scaffold materials for tissue engineering (TE) applications. This review introduces the 20 natural canonical amino acids as building blocks followed by highlighting the three categories of PAs: amphiphilic peptides, lipidated peptide amphiphiles and supramolecular peptide amphiphile conjugates, as well as their design rules that dictate the peptide self-assembly process. Furthermore, 3D bio-fabrication strategies of PAs hydrogels are discussed and the recent advances of PA-based scaffolds in TE with the emphasis on bone, cartilage and neural tissue regeneration both in vitro and in vivo are considered. Finally, future prospects and challenges are discussed.

Recent Advancements in Plant-Derived Nanomaterials Research for Biomedical Applications

Engineering, physics, chemistry, and biology are all involved in nanotechnology, which comprises a wide variety of multidisciplinary scientific field devices. The holistic utilization of metallic nanoparticles in the disciplines of bio-engineering and bio-medicine has attracted a great deal of attention. Medical nanotechnology research can offer immense health benefits for humans. While the advantages of developing nanomaterials have been well documented, it is precisely apparent that there are still some major issues that remain unattended to those need to be resolved immediately so as to ensure that they do not adversely affect living organisms in any manner. The existence of nanoparticles gives them particular value in biology and materials science, as an emerging scientific field, with multiple applications in science and technology, especially with numerous frontiers in the development of new materials. Presented here is a review of recent noteworthy developments regarding plant-derived nanomaterials and their use in the development of medicine and biomedical applications around the world.

Recent advances in electrospinning supramolecular systems

Electrospinning is one of the simple, versatile, and convenient techniques for producing nanofibers that have found numerous applications in the fields of biomedical engineering, surface materials, and catalysis. Despite the great achievements, the electrospinning compounds are still limited to the utilization of polymers with high molar mass which are regarded as an indispensable element for the production of nanofibers. It is found that electrospinning chemicals based on supramolecular systems can avoid the use of high molecular weight polymers, and it is emerging as a powerful route to generate fibers in the nano-scale size. The presence of strong intermolecular interactions that function as chain entanglements allows for the formation of nanofibers during the process of electrospinning. This article provides recent impressive developments concerning nanofiber preparation made by the combination of electrospinning and supramolecular chemistry, which enables easy access to tailor-made nanofibers. Electrospinning supramolecular systems consisting of phospholipids, surfactants, crown ether derivatives as well as cyclodextrins will be highlighted in this review. Moreover, we will pay particular attention to the functionalities of electrospun nanofibers obtained from supramolecular systems.

Wool Keratin-Based Nanofibres-In Vitro Validation

Protein-based nanofibres are commonly used in the biomedical field to support cell growth. For this study, the cell viability of wool keratin-based nanofibres was tested. Membranes were obtained by electrospinning using formic acid, hexafluoroisopropanol, and water as solvents. For aqueous solutions, polyethylene oxide blended with keratin was employed, and their use to support in vitro cell interactions was also validated. Morphological characterization and secondary structure quantification were carried out by SEM and FTIR analyses. Although formic acid produced the best nanofibres from a morphological point of view, the results showed a better response to cell proliferation after 14 days in the case of fibres from hexafluoroisopropanol solution. Polyethylene oxide in keratin nanofibres was demonstrated, over time, to influence in vitro cell interactions, modifying membranes-wettability and reducing the contact between keratin chains and water molecules, respectively.

Peptide-Based Electrospun Fibers: Current Status and Emerging Developments

Electrospinning is a well-known, straightforward, and versatile technique, widely used for the preparation of fibers by electrifying a polymer solution. However, a high molecular weight is not essential for obtaining uniform electrospun fibers; in fact, the primary criterion to succeed is the presence of sufficient intermolecular interactions, which function similar to chain entanglements. Some small molecules able to self-assemble have been electrospun from solution into fibers and, among them, peptides containing both natural and non-natural amino acids are of particular relevance. Nowadays, the use of peptides for this purpose is at an early stage, but it is gaining more and more interest, and we are now witnessing the transition from basic research towards applications. Considering the novelty in the relevant processing, the aim of this review is to analyze the state of the art from the early 2000s on. Moreover, advantages and drawbacks in using peptides as the main or sole component for generating electrospun nanofibers will be discussed. Characterization techniques that are specifically targeted to the produced peptide fibers are presented.

Advances in Fabricating the Electrospun Biopolymer-Based Biomaterials

Biopolymers formed into a fibrous morphology through electrospinning are of increasing interest in the field of biomedicine due to their intrinsic biocompatibility and biodegradability and their ability to be biomimetic to various fibrous structures present in animal tissues. However, their mechanical properties are often unsatisfactory and their processing may be troublesome. Thus, extensive research interest is focused on improving these qualities. This review article presents the selection of the recent advances in techniques aimed to improve the electrospinnability of various biopolymers (polysaccharides, polynucleotides, peptides, and phospholipids). The electrospinning of single materials, and the variety of co-polymers, with and without additives, is covered. Additionally, various crosslinking strategies are presented. Examples of cytocompatibility, biocompatibility, and antimicrobial properties are analyzed. Special attention is given to whey protein isolate as an example of a novel, promising, green material with good potential in the field of biomedicine. This review ends with a brief summary and outlook for the biomedical applicability of electrospinnable biopolymers.

Peptide grafting strategies before and after electrospinning of nanofibers

Nanofiber films produced by electrospinning currently provide a promising platform for different applications. Although nonfunctionalized nanofiber films from natural or synthetic polymers are extensively used, electrospun materials combined with peptides are gaining more interest. In fact, the selection of specific peptides improves the performance of the material for biological applications and mainly for tissue engineering, mostly by maintaining similar mechanical properties with respect to the simple polymer. The main drawback in using peptides blended with a polymer is the quick release of the peptides. To avoid this problem, covalent linking of the peptide is more beneficial. Here, we reviewed synthetic protocols that enable covalent grafting of peptides to polymers before or after the electrospinning procedures to obtain more robust electrospun materials. Applications and the performance of the new material compared to that of the starting polymer are discussed.

Carbon Nanomaterials Embedded in Conductive Polymers: A State of the Art

Carbon nanomaterials are at the forefront of the newest technologies of the third millennium, and together with conductive polymers, represent a vast area of indispensable knowledge for developing the devices of tomorrow. This review focusses on the most recent advances in the field of conductive nanotechnology, which combines the properties of carbon nanomaterials with conjugated polymers. Hybrid materials resulting from the embedding of carbon nanotubes, carbon dots and graphene derivatives are taken into consideration and fully explored, with discussion of the most recent literature. An introduction into the three most widely used conductive polymers and a final section about the most recent biological results obtained using carbon nanotube hybrids will complete this overview of these innovative and beyond belief materials.

Synthetic peptide hydrogels as 3D scaffolds for tissue engineering

The regeneration of tissues and organs poses an immense challenge due to the extreme complexity in the research work involved. Despite the tissue engineering approach being considered as a promising strategy for more than two decades, a key issue impeding its progress is the lack of ideal scaffold materials. Nature-inspired synthetic peptide hydrogels are inherently biocompatible, and its high resemblance to extracellular matrix makes peptide hydrogels suitable 3D scaffold materials. This review covers the important aspects of peptide hydrogels as 3D scaffolds, including mechanical properties, biodegradability and bioactivity, and the current approaches in creating matrices with optimized features. Many of these scaffolds contain peptide sequences that are widely reported for tissue repair and regeneration and these peptide sequences will also be discussed. Furthermore, 3D biofabrication strategies of synthetic peptide hydrogels and the recent advances of peptide hydrogels in tissue engineering will also be described to reflect the current trend in the field. In the final section, we will present the future outlook in the design and development of peptide-based hydrogels for translational tissue engineering applications.

Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications

Electrospinning is a versatile and viable technique for generating ultrathin fibers. Remarkable progress has been made with regard to the development of electrospinning methods and engineering of electrospun nanofibers to suit or enable various applications. We aim to provide a comprehensive overview of electrospinning, including the principle, methods, materials, and applications. We begin with a brief introduction to the early history of electrospinning, followed by discussion of its principle and typical apparatus. We then discuss its renaissance over the past two decades as a powerful technology for the production of nanofibers with diversified compositions, structures, and properties. Afterward, we discuss the applications of electrospun nanofibers, including their use as "smart" mats, filtration membranes, catalytic supports, energy harvesting/conversion/storage components, and photonic and electronic devices, as well as biomedical scaffolds. We highlight the most relevant and recent advances related to the applications of electrospun nanofibers by focusing on the most representative examples. We also offer perspectives on the challenges, opportunities, and new directions for future development. At the end, we discuss approaches to the scale-up production of electrospun nanofibers and briefly discuss various types of commercial products based on electrospun nanofibers that have found widespread use in our everyday life.

Graphene Nanoplatelet- and Hydroxyapatite-Doped Supramolecular Electrospun Fibers as Potential Materials for Tissue Engineering and Cell Culture

Porous and fibrous artificial extracellular matrices (ECM) called scaffolds are considered to be promising avenues of research in the field of biomedical engineering, including tissue fabrication through cell culture. The current work deals with the fabrication of new matrix-type scaffolds through electrospinning, in order to support future three-dimensional tissue formation. The selected material for the fabrication of these scaffolds was a supramolecular polymer (SP) that is based on ureiodypyrimidone hydrogen bonding units (UPy). More precisely, pure SP and modified electrospun scaffolds with (a) graphene nanoplatelets (GNPs), (b) hydroxyapatite (HA), and (c) a mixture of both were fabricated for the needs of the current study. The aim of this work is to engineer and to characterize SP electrospun scaffolds (with and without fillers) and study whether the introduction of the fillers improve the physical and mechanical properties of them. The obtained results indicate that doping the SP scaffolds with GNPs led to improved apparent mechanical properties while HA seems to slightly deteriorate them. For all cases, doping provided thinner fibers with a more hydrophilic surface. Taking together, these types of SP scaffolds can be further studied as potential candidate for cell culture.

Self-assembling peptides cross-linked with genipin: resilient hydrogels and self-standing electrospun scaffolds for tissue engineering applications

Self-assembling peptides (SAPs) are synthetic bioinspired biomaterials that can be feasibly multi-functionalized for applications in surgery, drug delivery, optics and tissue engineering (TE). Despite their promising biocompatibility and biomimetic properties, they have never been considered real competitors of polymers and/or cross-linked extracellular matrix (ECM) natural proteins. Indeed, synthetic SAP-made hydrogels usually feature modest mechanical properties, limiting their potential applications, due to the transient non-covalent interactions involved in the self-assembling phenomenon. Cross-linked SAP-hydrogels have been recently introduced to bridge this gap, but several questions remain open. New strategies leading to stiffer gels of SAPs may allow for a full exploitation of the SAP technology in TE and beyond. We have developed and characterized a genipin cross-linking strategy significantly increasing the stiffness and resiliency of FAQ(LDLK)3, a functionalized SAP already used for nervous cell cultures. We characterized different protocols of cross-linking, analyzing their dose and time-dependent efficiency, influencing stiffness, bioabsorption time and molecular arrangements. We choose the best developed protocol to electrospin into nanofibers, for the first time, self-standing, water-stable and flexible fibrous mats and micro-channels entirely made of SAPs. This work may open the door to the development and tailoring of bioprostheses entirely made of SAPs for different TE applications.

Fabrication of supramolecular cyclodextrin-fullerene nonwovens by electrospinning

Direct electrospinning of small molecules has great potential to fabricate a new class of fiber materials because this approach realizes the creation of various functional materials through the numerous molecular combinations. In this paper, we demonstrate a proof-of-concept to fabricate supramolecular fiber materials composed of cyclodextrin (CD)–fullerene inclusion complexes by electrospinning. Similar to the molecular state of fullerenes in solution, the resulting fibers include molecularly-dispersed fullerenes. We believe such a concept could be expanded to diverse host–guest complexes, opening up supramolecular solid materials science and engineering.

3D Scaffolds Based on Conductive Polymers for Biomedical Applications

3D scaffolds appear to be a cost-effective ultimate answer for biomedical applications, facilitating rapid results while providing an environment similar to in vivo tissue. These biomaterials offer large surface areas for cell or biomaterial attachment, proliferation, biosensing and drug delivery applications. Among 3D scaffolds, the ones based on conjugated polymers (CPs) and natural nonconductive polymers arranged in a 3D architecture provide tridimensionality to cellular culture along with a high surface area for cell adherence and proliferation as well electrical conductivity for stimulation or sensing. However, the scaffolds must also obey other characteristics: homogeneous porosity, with pore sizes large enough to allow cell penetration and nutrient flow; elasticity and wettability similar to the tissue of implantation; and a suitable composition to enhance cell-matrix interactions. In this Review, we summarize the fabrication methods, characterization techniques and main applications of conductive 3D scaffolds based on conductive polymers. The main barrier in the development of these platforms has been the fabrication and subsequent maintenance of the third dimension due to challenges in the manipulation of conductive polymers. In the last decades, different approaches to overcome these barriers have been developed for the production of conductive 3D scaffolds, demonstrating a huge potential for biomedical purposes. Finally, we present an overview of the emerging strategies developed to manufacture 3D conductive scaffolds, the techniques used to fully characterize them, and the biomedical fields where they have been applied.

Pullulan-alginate fibers produced using free surface electrospinning

Pullulan-alginate ultrafine fibers, with and without CaCl₂, were electrospun from aqueous polymer solutions using a free-surface electrospinning method, without the use of synthetic spinning aid polymer. Aqueous pullulan solution (10%, w/w) could be electrospun into beaded fibers of 110 nm in diameter with a board diameter distribution. By contrast, continuous and smooth fibers were formed when 0.8 to 1.6% (w/w) alginate was added to the 10% (w/w) pullulan solutions, producing smaller fibers ranging from 87 to 57 nm in diameter. The positive effect of alginate can be attributed to the increase in polymer chain entanglement, as well as enhanced hydrogen bonding interaction between pullulan and alginate. The addition of trace amount of CaCl₂ (up to 0.045%, w/w) resulted in smooth and ultrafine fibers that were significantly smaller in diameter and greater thermal stability than those prepared without the addition of CaCl_2. The production of typical electrospun fibers involves the use of undesirable organic solvents and/or non-food grade synthetic spinning aid polymer. The water-based edible biopolymer systems presented in this study can be useful for the preparation of nano-scale fibers that are more conducive for food, nutraceutical, and pharmaceutical applications.

* Engineering Membranes for Bone Regeneration

This review is focused on the use of membranes for the specific application of bone regeneration. The first section focuses on the relevance of membranes in this context and what are the specifications that they should possess to improve the regeneration of bone. Afterward, several techniques to engineer bone membranes by using "bulk"-like methods are discussed, where different parameters to induce bone formation are disclosed in a way to have desirable structural and functional properties. Subsequently, the production of nanostructured membranes using a bottom-up approach is discussed by highlighting the main advances in the field of bone regeneration. Primordial importance is given to the promotion of osteoconductive and osteoinductive capability during the membrane design. Whenever possible, the films prepared using different techniques are compared in terms of handability, bone guiding ability, osteoinductivity, adequate mechanical properties, or biodegradability. A last chapter contemplates membranes only composed by cells, disclosing their potential to regenerate bone.

Structural water as an essential comonomer in supramolecular polymerization

Although the concept of structural water that is bound inside hydrophobic pockets and helps to stabilize protein structures is well established, water has rarely found a similar role in supramolecular polymers. Water is often used as a solvent for supramolecular polymerization, however without taking the role of a comonomer for the supramolecular polymer structure. We report a low-molecular weight monomer whose supramolecular polymerization is triggered by the incorporation of water. The presence of water molecules as comonomers is essential to the polymerization process. The supramolecular polymeric material exhibits strong adhesion to surfaces, such as glass and paper. It can be used as a water-activated glue, which can be released at higher temperatures and reused many times without losing its performance.

Evolution of Surface Nanopores in Pressurised Gyrospun Polymeric Microfibers

The selection of a solvent or solvent system and the ensuing polymer–solvent interactions are crucial factors affecting the preparation of fibers with multiple morphologies. A range of poly(methylmethacrylate) fibers were prepared by pressurised gyration using acetone, chloroform, N,N-dimethylformamide (DMF), ethyl acetate and dichloromethane as solvents. It was found that microscale fibers with surface nanopores were formed when using chloroform, ethyl acetate and dichloromethane and poreless fibers were formed when using acetone and DMF as the solvent. These observations are explained on the basis of the physical properties of the solvents and mechanisms of pore formation. The formation of porous fibers is caused by many solvent properties such as volatility, solubility parameters, vapour pressure and surface tension. Cross-sectional images show that the nanopores are only on the surface of the fibers and they were not inter-connected. Further, the results show that fibers with desired nanopores (40–400 nm) can be prepared by carefully selecting the solvent and applied pressure in the gyration process.

Tough and Porous Hydrogels Prepared by Simple Lyophilization of LC Gels

Porous hydrogels possessing mechanical toughness were prepared from sacran, a supergiant liquid crystalline (LC) polysaccharide produced from Aphanothece sacrum. First, layered hydrogels were prepared by thermal cross-linking of film cast over a sacran LC solution. Then, anisotropic pores were constructed using a freeze-drying technique on the water-swollen layered hydrogels. Scanning electron microscopic observation revealed that pores were observable only on the side faces of sponge materials parallel to the layered structure but never on the top or bottom faces. The pore size, porosity, and swelling behavior were controlled by the thermal-cross-linking temperature. To clarify the freezing effect, a freeze-thawing method was used for comparison. The freeze-thawed hydrogels also formed layers but no pores. The mechanical properties and network structures of hydrogels were also studied, clarifying that porous hydrogels, even those with a high quantity of pores, were tough owing to the pores orienting along the layer direction like tunnels.

Fabrication of nanofibrous electrospun scaffolds from a heterogeneous library of co- and self-assembling peptides

Self-assembling (SAPs) and co-assembling peptides (CAPs) are driving increasing enthusiasm as synthetic but biologically inspired biomaterials amenable of easy functionalization for regenerative medicine. On the other hand, electrospinning (ES) is a versatile technique useful for tailoring the nanostructures of various biomaterials into scaffolds resembling the extracellular matrices found in organs and tissues. The synergistic merging of these two approaches is a long-awaited advance in nanomedicine that has not been deeply documented so far. In the present work, we describe the successful ES of a library of diverse SAPs and CAPs into biomimetic nanofibrous mats. Our results suggest that suitable ES solutions are characterized by high concentrations of peptides, providing backbone physical chain entanglements, and by random coil/α-helical conformations while β-sheet aggregation may be detrimental to spinnability. The resulting peptide fibers feature interconnected seamless mats with nanofibers average diameters ranging from ∼100nm to ∼400nm. Also, peptide chemical nature and ES set up parameters play pivotal roles in determining the conformational transitions and morphological properties of the produced nanofibers. Far from being an exhaustive description of the just-opened novel field of ES-assembled peptides, this seminal work aims at shining a light on a still missing general theory for the production of electrospun peptidic biomaterials bringing together the spatial, biochemical and biomimetic of these two techniques into unique scaffolds for tissue engineering.

STATEMENT OF SIGNIFICANCE

Construction of peptide hydrogels has received considerable attention due to their potential as nanostructures amenable of easy functionalization and capable of creating microenvironments suited for culturing cells and triggering tissue regeneration. They display a superior biocompatibility unmatched by other known synthetic biomaterials so far. However, their applications are confined to body fillers because most of them do spontaneously form hydrogels, while effective tissue regeneration often requires well-defined fibrous scaffolds. In this work, we developed electrospun fibers of various peptides (cross-beta self-assembling, hierarchically assembling, functionalized, co-assembling) and we provided a deep understanding of the crucial phenomena to be taken into account when peptides fibers fabrication. These results open new venues for exploring novel regenerative applications of peptide nanofibrous scaffolds.

Liquid crystal templating as an approach to spatially and temporally organise soft matter

Liquid crystal templating: an emerging technique to organise and control soft matter at multiple length scales.

Latent Oxidative Polymerization of Catecholamines as Potential Cross-linkers for Biocompatible and Multifunctional Biopolymer Scaffolds

Electrospinning of naturally occurring biopolymers for biological applications requires postspinning cross-linking for endurance in protease-rich microenvironments and prevention of rapid dissolution. The most commonly used cross-linkers often generate cytotoxic byproducts, which necessitate high concentrations or time-consuming procedures. Herein, we report the addition of "safe" catecholamine cross-linkers to collagen or gelatin dope solutions followed by electrospinning yielded junction-containing nanofibrous mats. Subsequent in situ oxidative polymerization of the catecholamines increased the density of soldered junctions and maintained the porous nanofiber architecture. This protocol imparted photoluminescence to the biopolymers, a smooth noncytotoxic coating, and good mechanical/structural stability in aqueous solutions. The utility of our approach was demonstrated by the preparation of durable antimicrobial wound dressings and mineralized osteoconductive scaffolds via peptide antibiotics and calcium chloride (CaCl₂) incorporation into the dope solutions. The mineralized composite mats consist of amorphous calcium carbonate that enhanced the osteoblasts cell proliferation, differentiation, and expression of important osteogenic marker proteins. In proof-of-concept experiments, antibiotic-loaded mats displayed superior antimicrobial properties relative to silver (Ag)-based dressings, and accelerated wound healing in a porcine deep dermal burn injury model.

Peptidic Biomaterials: From Self-Assembling to Regenerative Medicine

Peptidic biomaterials represent a particularly exciting topic in regenerative medicine. Peptidic scaffolds can be specifically designed for biomimetic customization for targeted therapy. The field is at a pivotal point where preclinical research is being translated into clinics, so it is crucial to understand the theory and describe the status of this rapidly developing technology. In this review, we highlight major advantages and current limitations of self-assembling peptide-based biomaterials, and we discuss the most widely used classes of assembling peptides, describing recent and promising approaches in tissue engineering, drug delivery, and clinics. We also suggest design strategies and hurdles that still need to be overcome to fully exploit their therapeutic potential.

Directed peptide amphiphile assembly using aqueous liquid crystal templates in magnetic fields

An alignment technique based on the combination of magnetic fields and a liquid crystal (LC) template uses the advantages of both approaches: the magnetic fields offer non-contact methods that apply to all sample sizes and shapes, whilst the LC templates offer high susceptibilities. The combination introduces a route to control the spatial organization of materials with low intrinsic susceptibilities. We demonstrate that we can unidirectionally align one such material, peptide amphiphiles in water, on a centimeter scale at a tenfold lower magnetic field by using a lyotropic chromonic liquid crystal as a template. We can transform the aligned supramolecular assemblies into optically active π-conjugated polymers after photopolymerization. Lastly, by reducing the magnetic field strength needed for addressing these assemblies, we are able to create more complex structures by initiating self-assembly of our supramolecular materials under competing alignment forces between the magnetically induced alignment of the assemblies (with a positive diamagnetic anisotropy) and the elastic force dominated alignment of the template (with a negative diamagnetic anisotropy), which is directed orthogonally. Although the approach is still in its infancy and many critical parameters need optimization, we believe that it is a very promising technique to create tailor-made complex structures of (aqueous) functional soft matter.

Processing and surface modification of polymer nanofibers for biological scaffolds: a review

Polymeric fibrous constructs possess high surface area-to-volume ratios when compared with solid substrates and are quite commonly used as tissue engineering and cell growth scaffolds. An overview of important design and material considerations for fibrous scaffolds as well as an outline of both established and emerging solution- and melt-based fabrication techniques is provided. Innovative post-process surface modification avenues using "click" chemistry with both single and dual active cues as well as gradient cues, which maintain the fibrous structure are described. By combining process parameters with post-process surface modification, researchers have been able to selectively tune cellular response after seeding and culturing on fibrous constructs.

Directed Assembly of Soft Anisotropic Nanoparticles by Colloid Electrospinning

Directed assembly of triblock copolymer worms to produce nanostructured fibers is achieved via colloid electrospinning. These copolymer worms are conveniently prepared by polymerization-induced self-assembly in concentrated aqueous dispersion. Addition of a second water-soluble component, poly(vinyl alcohol), is found to be critical for the production of well-defined fibers: trial experiments performed using the worms alone produce only spherical microparticles. Transmission electron microscopy studies confirm that the worm morphology survives electrospinning and the worms become orientated parallel to the main axis of the fibers during their generation. The average deviant angle (θ_dev ) between the worm orientation and fiber axis decreases from 17° to 9° as the worm/PVA mass ratio increases from 1.15:1 to 5:1, indicating a greater degree of worm alignment within fibers with higher worm contents and smaller fiber diameters. Thus triblock copolymer fibers of ≈300 ± 120 nm diameter can be readily produced that comprise aligned worms on the nanoscale.

Directing Soft Matter in Water Using Electric Fields

Directing the spatial organization of functional supramolecular and polymeric materials at larger length scales is essential for many biological and molecular optoelectronic applications. Although the application of electrical fields is one of the most powerful approaches to induce spatial control, it is rarely applied experimentally in aqueous solutions, since the low susceptibility of soft and biological materials requires the use of high fields, which leads to parasitic heating and electrochemical degradation. In this work, we demonstrate that we can apply electric fields when we use a mineral liquid crystal as a responsive template. Besides aligning and positioning functional soft matter, we show that the concentration of the liquid crystal template controls the morphology of the assembly. As our setup is very easy to operate and our approach lacks specific molecular interactions, we believe it will be applicable for a wide range of (aqueous) materials.

Creating biomaterials with spatially organized functionality

Biomaterials for tissue engineering provide scaffolds to support cells and guide tissue regeneration. Despite significant advances in biomaterials design and fabrication techniques, engineered tissue constructs remain functionally inferior to native tissues. This is largely due to the inability to recreate the complex and dynamic hierarchical organization of the extracellular matrix components, which is intimately linked to a tissue's biological function. This review discusses current state-of-the-art strategies to control the spatial presentation of physical and biochemical cues within a biomaterial to recapitulate native tissue organization and function.

A structurally self-assembled peptide nano-architecture by one-step electrospinning

Peptide self-assembly during electrospinning while the solvent is evaporating and the fibres are forming.

Methods and strategies for the synthesis of diverse nanoparticles and their applications: a comprehensive overview

Various methods to synthesize diverse nanoparticles with their different applications.

1,1,1,3,3,3-Hexafluoro-2-propanol (HFIP) as a novel and effective solvent to facilely prepare cyclodextrin-assembled materials

HFIP solutions of CDs act as a powerful tool to facilely prepare CD-assembled materials.

Supramolecular copolymers obtained from two-component gels: metal ion-mediated cross-linking, enhanced viscoelasticity and supramolecular yarns

Bolaamphiphilic l-histidine and 2,2′-bipyridine-dicarboxylic acids were assembled into supramolecular polymers, which were further cross-linked by Cu(ii) ions.