Artificial biomelanin: highly light-absorbing nano-sized eumelanin by biomimetic synthesis in chicken egg white

A Novel Mechanically Robust and Biodegradable Egg White Hydrogel Membrane by Combined Unidirectional Nanopore Dehydration and Annealing

A homogeneous egg white obtained by high-speed shearing and centrifugation was dehydrated into a fragile and water-soluble egg white glass (EWG) by unidirectional nanopore dehydration (UND). After EWG annealing, it can become an egg white hydrogel membrane (EWHM) that is water-insoluble, flexible, biocompatible, and mechanically robust. Its tensile strength, elongation at break, and the swelling ratio are about 5.84 MPa, 50-110%, and 60-130%, respectively. Protein structure analysis showed that UND caused the rearrangement of the protein molecules to form EWG with random coil and α-helix structures. The thermal decomposition temperature of the EWG was 309.25 °C. After EWG annealing at over 100 or 110 °C for 1.0 h or 45 min, the porous network EWHM was mainly composed of β-sheet structures, and the thermal decomposition temperature increased to 317.25-318.43 °C. Their 12-day residues in five proteases ranged from 1% to 99%, and the order was pepsin > neutral protease > papain > trypsin > alkaline protease. Mouse fibroblast L929 cells can adhere, grow, and proliferate well on these EWHMs. Therefore, the combined technology of UND and annealing for green and novel processing of EWHM has potential applications in the field of biomimetic and biomedical materials.

Experimental Methods to Get Polydopamine Films: A Comparative Review on the Synthesis Methods, the Films' Composition and Properties

In 2007, polydopamine (PDA) films were shown to be formed spontaneously on the surface of all known classes of materials by simply dipping those substrates in an aerated dopamine solution at pH = 8.5 in the presence of Tris(hydroxymethyl) amino methane buffer. This universal deposition method has raised a burst of interest in surface science, owing not only to the universality of this water based one pot deposition method but also to the ease of secondary modifications. Since then, PDA films and particles are shown to have applications in energy conversion, water remediation systems, and last but not least in bioscience. The deposition of PDA films from aerated dopamine solutions is however a slow and inefficient process at ambient temperature with most of the formed material being lost as a precipitate. This incited to explore the possibility to get PDA and related films based on other catecholamines, using other oxidants than dissolved oxygen and other deposition methods. Those alternatives to get PDA and related films are reviewed and compared in this paper. It will appear that many more investigations are required to get better insights in the relationships between the preparation method of PDA and the properties of the obtained coatings.

Melanins as Sustainable Resources for Advanced Biotechnological Applications

Melanins are a class of biopolymers that are widespread in nature and have diverse origins, chemical compositions, and functions. Their chemical, electrical, optical, and paramagnetic properties offer opportunities for applications in materials science, particularly for medical and technical uses. This review focuses on the application of analytical techniques to study melanins in multidisciplinary contexts with a view to their use as sustainable resources for advanced biotechnological applications, and how these may facilitate the achievement of the United Nations Sustainable Development Goals.

An insight on egg white: From most common functional food to biomaterial application

Natural egg white tis widely used as an ingredient in nutritional foods and for food processing. Due to its characteristic foaming, emulsification, adhesion, and gelation, and its heat setting, biocompatibility, and low cost, research into the application and development of egg white in biomaterials, especially medical biomaterials, have been receiving attention. The composition and characteristics of egg white protein, and the physical mixing and chemically cross-linking of egg white with other materials used to make degradable packaging films, bioceramics, bioplastics, biomimetic films, hydrogels, 3D scaffolds, bone regeneration, biopatterning, biosensors, and so forth, are reviewed in detail in this report. The novel egg white-based biomaterials in various forms and applications could be constructed mostly through physical treatments such as ultrasonic wave, ultraviolet, laser and other radiation or high-temperature calcination. Furthermore, the application and prospects for the use of egg white in biomaterials is also discussed.

Current developments in the nanomediated delivery of photoprotective phytochemicals

Natural products have been used to protect the skin from harmful UV radiation for decades. Due to the ecotoxicological implications of synthetic sunscreen exposure in aquatic ecosystems, there is a greater need to explore alternative sources of UV filters. Recent research has focused on discovering novel UV absorbing photoprotective molecules from nature. In response to the excessive damage caused by UVB rays, plants induce the production of high concentrations of phytoprotective secondary metabolites and anti-oxidative enzymes. Despite promising UV absorbing and photoprotective properties, plant secondary metabolites have been underutilized in topical delivery due to low solubility and high instability. Numerous phytochemicals have been effectively nanosized, incorporated in formulations, and studied for their sustained effects in photoprotection. The present review outlines recent developments in nanosizing and delivering photoprotective crude plant extract and phytochemicals from a phytochemical perspective. We searched for articles using keywords: "UV damage," "skin photoprotection," "photodamage," and "nano delivery" in varied combinations. We identified and reviewed literature from 43 original research articles exploring nanosized phytochemicals and crude plant extracts with photoprotective activity. Nanosized phytochemicals retained higher amounts of bioactive compounds in the skin and acted as depots for their sustained release. Novel approaches in nanosizing considerably improved the photostability, efficacy, and water resistance of plant secondary metabolites. We further discuss the need for broad-spectrum sunscreen products, potential challenges, and future growth in this area.

Melanin and Melanin-Like Hybrid Materials in Regenerative Medicine

Melanins are a group of dark insoluble pigments found widespread in nature. In mammals, the brown-black eumelanins and the reddish-yellow pheomelanins are the main determinants of skin, hair, and eye pigmentation and play a significant role in photoprotection as well as in many biological functions ensuring homeostasis. Due to their broad-spectrum light absorption, radical scavenging, electric conductivity, and paramagnetic behavior, eumelanins are widely studied in the biomedical field. The continuing advancements in the development of biomimetic design strategies offer novel opportunities toward specifically engineered multifunctional biomaterials for regenerative medicine. Melanin and melanin-like coatings have been shown to increase cell attachment and proliferation on different substrates and to promote and ameliorate skin, bone, and nerve defect healing in several in vivo models. Herein, the state of the art and future perspectives of melanins as promising bioinspired platforms for natural regeneration processes are highlighted and discussed.

Polydopamine as a stable and functional nanomaterial

The mussel inspired chemistry of dopamine leading to versatile coatings on the surface of all kinds of materials in a one pot process was considered as the unique aspect of catecholamine for a long time. Only recently, research has been undertaken to valorize the simultaneous oxidation and colloid formation in dopamine solutions in the presence of an oxidant. This mini review summarizes the synthesis methods allowing to get controlled nanomaterials, either nanoparticles, hollow capsules or nanotubes and even chiral nanomaterials from dopamine solutions. Finally the applications of those nanomaterials will be described.

Functional Protein-Based Bioinspired Nanomaterials: From Coupled Proteins, Synthetic Approaches, Nanostructures to Applications

Protein-based bioinspired nanomaterials (PBNs) combines the advantage of the size, shape, and surface chemistry of nanomaterials, the morphology and functions of natural materials, and the physical and chemical properties of various proteins. Recently, there are many exciting developments on biomimetic nanomaterials using proteins for different applications including, tissue engineering, drug delivery, diagnosis and therapy, smart materials and structures, and water collection and separation. Protein-based biomaterials with high biocompatibility and biodegradability could be modified to obtain the healing effects of natural organisms after injury by mimicking the extracellular matrix. For cancer and other diseases that are difficult to cure now, new therapeutic methods involving different kinds of biomaterials are studied. The nanomaterials with surface modification, which can achieve high drug loading, can be used as drug carriers to enhance target and trigger deliveries. For environment protection and the sustainability of the world, protein-based nanomaterials are also applied for water treatment. A wide range of contaminants from natural water source, such as organic dyes, oil substances, and multiple heavy ions, could be absorbed by protein-based nanomaterials. This review summarizes the formation and application of functional PBNs, and the details of their nanostructures, the proteins involved, and the synthetic approaches are addressed.

Polydopamine Nanoparticles Prepared Using Redox-Active Transition Metals

Autoxidation of dopamine to polydopamine by dissolved oxygen is a slow process that requires highly alkaline conditions. Polydopamine can be formed rapidly also in mildly acidic and neutral solutions by using redox-active transition-metal ions. We present a comparative study of polydopamine nanoparticles formed by autoxidation and aerobic or anaerobic oxidation in the presence of Ce(IV), Fe(III), Cu(II), and Mn(VII). The UV-vis spectra of the purified nanoparticles are similar, and dopaminechrome is an early intermediate species. At low pH, Cu(II) requires the presence of oxygen and chloride ions to produce polydopamine at a reasonable rate. The changes in dispersibility and surface charge take place at around pH 4, which indicates the presence of ionizable groups, especially carboxylic acids, on their surface. X-ray photoelectron spectroscopy shows the presence of three different classes of carbons, and the carbonyl/carboxylate carbons amount to 5-15 atom %. The N 1s spectra show the presence of protonated free amino groups, suggesting that these groups may interact with the π-electrons of the intact aromatic dihydroxyindole moieties, especially in the metal-induced samples. The autoxidized and Mn(VII)-induced samples do not contain metals, but the metal content is 1-2 atom % in samples prepared with Ce(IV) or Cu(II), and ca. 20 atom % in polydopamine prepared in the presence of Fe(III). These differences in the metal content can be explained by the oxidation and complexation properties of the metals using the general model developed. In addition, the nitrogen content is lower in the metal-induced samples. All of the metal oxidants studied can be used to rapidly prepare polydopamine at room temperature, but the possible influence of the metal content and nitrogen loss should be taken into account.

Effects of pH and Oxidants on the First Steps of Polydopamine Formation: A Thermodynamic Approach

We present a general thermodynamic top-down analysis of the effects of oxidants and pH on dopamine oxidation and cyclization, supplemented with UV-vis and electrochemical studies. The model is applicable to other catecholamines and various experimental conditions. The results show that the decisive physicochemical parameters in autoxidation are the p K values of the semiquinone and the amino group in the oxidized quinone. Addition of Ce(IV) or Fe(III) enhances dopamine oxidation in acidic media in aerobic and anaerobic conditions by the direct oxidation of dopamine and, in the presence of oxygen, also by the autoxidation of the formed semiquinone. At pH 4.5, the enhancement of the one-electron oxidation of dopamine explains the overall reaction enhancement, but at a lower pH, cyclization becomes rate-determining. Oxidation by Cu(II) at reasonable rates requires the presence of oxygen or chloride ions.

Free-standing polydopamine films generated in the presence of different metallic ions: the comparison of reaction process and film properties

Polydopamine is widely used in surface modification, nanofiltration, photonic devices and drug delivery. The formation mechanism and properties of polydopamine are modified by the experimental conditions. Herein we demonstrated a comparison study of free-standing polydopamine films generated at the air-solution interface and their corresponding nanoparticles in solutions, in the presence of various metallic cations, Na+, Ca2+, Mg2+ and Co2+. Adding metallic ions influenced the intermediates in dopamine polymerization, and in turn the morphology and properties of the produced free-standing polydopamine films. Moreover, we observed that the polymerization process accompanying the stratification determines the formation of free-standing films at the air-solution interface: the fast polymerization of dopamine in a Co2+ environment leads to a rugged film surface and porous film body, whereas the comparatively slow polymerization of dopamine under conditions of other metallic ions results in a smooth and solid film. In addition, the water contact angles of the upper and lower surface of the polydopamine films were different. This investigation enriches our knowledge of dopamine polymerization in different environments, which is particularly useful for further application of free-standing polydopamine films.

Boric Acid as an Efficient Agent for the Control of Polydopamine Self-Assembly and Surface Properties

The deposition of polydopamine (PDA) films on surfaces, a versatile deposition method with respect to the nature of the used substrate, is unfortunately accompanied by deposition of insoluble precipitates in solution after a prolonged oxidation time of dopamine solutions. Therefore, there is evident interest to find methods able to stop the deposition of PDA on surfaces and to simultaneously control the self-assembly of PDA in solution to get stable colloidal aggregates. In addition to proposed methods relying on the use of polymers like poly(vinyl alcohol) and proteins like human serum albumin, we show herein that boric acid is an efficient adjuvant that is simultaneously able to stop the self-assembly of PDA in solution as well as on surfaces and to change the adhesive properties of the resulting PDA coatings.

Bio-Optics and Bio-Inspired Optical Materials

Through the use of the limited materials palette, optimally designed micro- and nanostructures, and tightly regulated processes, nature demonstrates exquisite control of light-matter interactions at various length scales. In fact, control of light-matter interactions is an important element in the evolutionary arms race and has led to highly engineered optical materials and systems. In this review, we present a detailed summary of various optical effects found in nature with a particular emphasis on the materials and optical design aspects responsible for their optical functionality. Using several representative examples, we discuss various optical phenomena, including absorption and transparency, diffraction, interference, reflection and antireflection, scattering, light harvesting, wave guiding and lensing, camouflage, and bioluminescence, that are responsible for the unique optical properties of materials and structures found in nature and biology. Great strides in understanding the design principles adapted by nature have led to a tremendous progress in realizing biomimetic and bioinspired optical materials and photonic devices. We discuss the various micro- and nanofabrication techniques that have been employed for realizing advanced biomimetic optical structures.

Stable Benzacridine Pigments by Oxidative Coupling of Chlorogenic Acid with Amino Acids and Proteins: Toward Natural Product-Based Green Food Coloring

The occasional greening of sweet potatoes and other plant tissues observed during cooking or other food processing has been shown to arise from the autoxidative coupling of chlorogenic acid (CGA, 5-caffeoylquinic acid) with amino acid components, leading to trihydroxybenzacridine pigments. To explore the potential of this reaction for food coloring, we report herein the optimized biomimetic preparation of trihydroxybenzacridine pigments from CGA and amino acids such as glycine and lysine, their straightforward purification by gel filtration chromatography, the UHPLC-MS/MS analysis of the purified pigment fraction, and a detailed characterization of the pH-dependent trihydroxybenzacridine chromophore. Similar green pigments were also obtained by analogous reaction of CGA with a low-cost protein, bovine serum albumin, and by simply adding CGA to chicken egg white (CEW) under stirring. Neither the purified pigments from amino acids nor the pigmented CEW exerted significant toxicity against two human cell lines, Caco-2 and HepG2, at doses compatible with common use in food coloring. Additions of the pure pigments or pigmented CEW to different food matrices imparted intense green hues, and the thermal stability of these preparations proved satisfactory up to 90 °C. The potential application of the greening reaction for the sensing of fish deterioration is also disclosed.

Composite Materials and Films Based on Melanins, Polydopamine, and Other Catecholamine-Based Materials

Polydopamine (PDA) is related to eumelanins in its composition and structure. These pigments allow the design, inspired by natural materials, of composite nanoparticles and films for applications in the field of energy conversion and the design of biomaterials. This short review summarizes the main advances in the design of PDA-based composites with inorganic and organic materials.

TGF-β1/Smad3 Pathway Targets PP2A-AMPK-FoxO1 Signaling to Regulate Hepatic Gluconeogenesis

Maintenance of glucose homeostasis is essential for normal physiology. Deviation from normal glucose levels, in either direction, increases susceptibility to serious medical complications such as hypoglycemia and diabetes. Maintenance of glucose homeostasis is achieved via functional interactions among various organs: liver, skeletal muscle, adipose tissue, brain, and the endocrine pancreas. The liver is the primary site of endogenous glucose production, especially during states of prolonged fasting. However, enhanced gluconeogenesis is also a signature feature of type 2 diabetes (T2D). Thus, elucidating the signaling pathways that regulate hepatic gluconeogenesis would allow better insight into the process of normal endogenous glucose production as well as how this process is impaired in T2D. Here we demonstrate that the TGF-β1/Smad3 signaling pathway promotes hepatic gluconeogenesis, both upon prolonged fasting and during T2D. In contrast, genetic and pharmacological inhibition of TGF-β1/Smad3 signals suppressed endogenous glucose production. TGF-β1 and Smad3 signals achieved this effect via the targeting of key regulators of hepatic gluconeogenesis, protein phosphatase 2A (PP2A), AMP-activated protein kinase (AMPK), and FoxO1 proteins. Specifically, TGF-β1 signaling suppressed the LKB1-AMPK axis, thereby facilitating the nuclear translocation of FoxO1 and activation of key gluconeogenic genes, glucose-6-phosphatase and phosphoenolpyruvate carboxykinase. These findings underscore an important role of TGF-β1/Smad3 signaling in hepatic gluconeogenesis, both in normal physiology and in the pathophysiology of metabolic diseases such as diabetes, and are thus of significant medical relevance.

Expanding the aqueous-based redox-facilitated self-polymerization chemistry of catecholamines to 5,6-dihydroxy-1H-benzimidazole and its 2-substituted derivatives

Redox-facilitated self-polymerization can be performed with 5,6-dihydroxy-1H-benzimidazole to generate materials analogous to polydopamine, proving the possibility to expand the catecholamine-based chemistry to N-heterocyclic catechol derivatives.

Polydopamine nanofilms as visible light-harvesting interfaces for palladium nanocrystal catalyzed coupling reactions

We herein report mussel-inspired polydopamine nanofilms as light-harvesting interfaces for heterogeneous palladium catalyzed coupling reactions under irradiation from visible light.

Oxidative Self-Polymerization of Dopamine in an Acidic Environment

A weak alkaline condition (pH > 8) is a general requirement for oxidative self-polymerization of dopamine. Here, we first demonstrated the generation of polydopamine in an acidic environment via a hydrothermal method. The pH scope of self-polymerization of dopamine is extended to pH ∼ 1 in a hydrothermal process. Polydopamine generated via a hydrothermal method shows similar chemical features and radical scavenging activity with that generated in a basic environment.