Adsorption Force of Fibronectin on Various Surface Chemistries and Its Vital Role in Osteoblast Adhesion

Advances of Blood Coagulation Factor XIII in Bone Healing

The biologic process of bone healing is complicated, involving a variety of cells, cytokines, and growth factors. As a result of bone damage, the activation of a clotting cascade leads to hematoma with a high osteogenic potential in the initial stages of healing. A major factor involved in this course of events is clotting factor XIII (FXIII), which can regulate bone defect repair in different ways during various stages of healing. Autografts and allografts often have defects in clinical practice, making the development of advanced materials that support bone regeneration a critical requirement. Few studies, however, have examined the promotion of bone healing by FXIII in combination with biomaterials, in particular, its effect on blood coagulation and osteogenesis. Therefore, we mainly summarized the role of FXIII in promoting bone regeneration by regulating the extracellular matrix and type I collagen, bone-related cells, angiogenesis, and platelets, and described the research progress of FXIII = related biomaterials on osteogenesis. This review provides a reference for investigators to explore the mechanism by which FXIII promotes bone healing and the combination of FXIII with biomaterials to achieve targeted bone tissue repair.

Amino-Functionalized Zirconium-Based Metal-Organic Frameworks as Bifunctional Nanomaterials to Treat Bone Tumors and Promote Osteogenesis

Bone tumor patients often encounter challenges associated with cancer cell residues and bone defects postoperation. To address this, there is an urgent need to develop a material that can enable tumor treatment and promote bone repair. Metal-organic frameworks (MOFs) have attracted the interest of many researchers due to their special porous structure, which has great potential in regenerative medicine and drug delivery. However, few studies explore MOFs with dual antitumor and bone regeneration properties. In this study, we investigated amino-functionalized zirconium-based MOF nanoparticles (UiO-66-NH2 NPs) as bifunctional nanomaterials for bone tumor treatment and osteogenesis promotion. UiO-66-NH2 NPs loading with doxorubicin (DOX) (DOX@UiO-66-NH2 NPs) showed good antitumor efficacy both in vitro and in vivo. Additionally, DOX@UiO-66-NH2 NPs significantly reduced lung injury compared to free DOX in vivo. Interestingly, the internalized UiO-66-NH2 NPs notably promoted the osteogenic differentiation of preosteoblasts. RNA-sequencing data revealed that PI3K-Akt signaling pathways or MAPK signaling pathways might be involved in this enhanced osteogenesis. Overall, UiO-66-NH2 NPs exhibit dual functionality in tumor treatment and bone repair, making them highly promising as a bifunctional material with broad application prospects.

Unusual effects of a nanoporous gold substrate on cell adhesion and differentiation because of independent multi-branch signaling of focal adhesions

A variety of cell behaviors, such as cell adhesion, motility, and fate, can be controlled by substrate characteristics such as surface topology and chemistry. In particular, the surface topology of substrates strongly affects cell behaviors, and the topological spacing is a critical factor in inducing cell responses. Various works have demonstrated that cell adhesion was enhanced with decreasing topological spacing although differentiation progressed slowly. However, there are exceptions, and thus, correlations between topological spacing and cell responses are still debated. We show that a nanoporous gold substrate affected cell adhesion while it neither affected osteogenic nor adipogenic differentiation. In addition, the cell adhesion was reduced with decreasing pore size. These do not agree with previous findings. A focal adhesion (FA) is an aggregate of modules comprising specific proteins such as FA kinase, talin, and vinculin. Therefore, it is suggested that because various extracellular signals can be independently branched off from the FA modules, the unusual effects of nanoporous gold substrates are related to the multi-branching of FAs.

The Cell Adhesion and Proliferation Enhancement Impact of Low-Temperature Atmospheric Pressure Plasma-Polymerized Heptylamine on the Surface of Ti6Al4V Alloy

To chemically functionalize the Ti6Al4V alloy surface, a custom-made low-temperature atmospheric pressure plasma reactor device was used to polymerize heptylamine on it. The effect of different deposition times, an important process parameter, was also investigated. For each deposition time group, the surface morphology was observed via scanning electron microscopy (SEM). The surface chemical content was analyzed via X-ray photoelectron spectroscopy, and surface hydrophilicity was measured via water contact angle. The adhesion of bone marrow stromal cells (BMSCs) on the modified Ti6Al4V alloy surfaces was also observed via SEM. A quantitative evaluation of cell proliferation was performed via the Cell Counting Kit-8 assay. The results revealed that amino groups were introduced on the Ti6Al4V alloy surface via plasma-polymerized heptylamine (PPHA). The percentages of NH2/C for various deposition times (0 s, 30 s, 45 s, 60 s, 90 s, and 120 s) were 3.39%, 5.14%, 6.71%, 6.72%, 7.31%, and 7.65%. A 30 s, 45 s, and 60 s deposition time could significantly increase surface hydrophilicity with a mean water contact angle of 62.1 ± 1.6°, 65.7 ± 1.1°, and 88.2 ± 1.4°, respectively. Meanwhile, a 60 s, 90 s, and 120 s deposition time promoted BMSCs cell adhesion and proliferation. However, this promotion effect differed non-significantly among the three groups. In conclusion, the introduction of amino groups on the Ti6Al4V alloy surface exhibited surface modification and enhancement of cell adhesion and proliferation, which was partially associated with deposition time.

Cell-Tissue Interaction: The Biomimetic Approach to Design Tissue Engineered Biomaterials

The advancement achieved in Tissue Engineering is based on a careful and in-depth study of cell-tissue interactions. The choice of a specific biomaterial in Tissue Engineering is fundamental, as it represents an interface for adherent cells in the creation of a microenvironment suitable for cell growth and differentiation. The knowledge of the biochemical and biophysical properties of the extracellular matrix is a useful tool for the optimization of polymeric scaffolds. This review aims to analyse the chemical, physical, and biological parameters on which are possible to act in Tissue Engineering for the optimization of polymeric scaffolds and the most recent progress presented in this field, including the novelty in the modification of the scaffolds' bulk and surface from a chemical and physical point of view to improve cell-biomaterial interaction. Moreover, we underline how understanding the impact of scaffolds on cell fate is of paramount importance for the successful advancement of Tissue Engineering. Finally, we conclude by reporting the future perspectives in this field in continuous development.

Response of Osteoblasts on Amine-Based Nanocoatings Correlates with the Amino Group Density

Increased life expectancy in industrialized countries is causing an increased incidence of osteoporosis and the need for bioactive bone implants. The integration of implants can be improved physically, but mainly by chemical modifications of the material surface. It was recognized that amino-group-containing coatings improved cell attachment and intracellular signaling. The aim of this study was to determine the role of the amino group density in this positive cell behavior by developing controlled amino-rich nanolayers. This work used covalent grafting of polymer-based nanocoatings with different amino group densities. Titanium coated with the positively-charged trimethoxysilylpropyl modified poly(ethyleneimine) (Ti-TMS-PEI), which mostly improved cell area after 30 min, possessed the highest amino group density with an N/C of 32%. Interestingly, changes in adhesion-related genes on Ti-TMS-PEI could be seen after 4 h. The mRNA microarray data showed a premature transition of the MG-63 cells into the beginning differentiation phase after 24 h indicating Ti-TMS-PEI as a supportive factor for osseointegration. This amino-rich nanolayer also induced higher bovine serum albumin protein adsorption and caused the cells to migrate slower on the surface after a more extended period of cell settlement as an indication of a better surface anchorage. In conclusion, the cell spreading on amine-based nanocoatings correlated well with the amino group density (N/C).

Material-driven fibronectin and vitronectin assembly enhances BMP-2 presentation and osteogenesis

Mesenchymal stem cell (MSC)-based tissue engineering strategies are of interest in the field of bone tissue regenerative medicine. MSCs are commonly investigated in combination with growth factors (GFs) and biomaterials to provide a regenerative environment for the cells. However, optimizing how biomaterials interact with MSCs and efficiently deliver GFs, remains a challenge. Here, via plasma polymerization, tissue culture plates are coated with a layer of poly (ethyl acrylate) (PEA), which is able to spontaneously permit fibronectin (FN) to form fibrillar nanonetworks. However, vitronectin (VN), another important extracellular matrix (ECM) protein forms multimeric globules on the polymer, thus not displaying functional groups to cells. Interestingly, when FN and VN are co-absorbed onto PEA surfaces, VN can be entrapped within the FN fibrillar nanonetwork in the monomeric form providing a heterogeneous, open ECM network. The combination of FN and VN promote MSC adhesion and leads to enhanced GF binding; here we demonstrate this with bone morphogenetic protein-2 (BMP2). Moreover, MSC differentiation into osteoblasts is enhanced, with elevated expression of osteopontin (OPN) and osteocalcin (OCN) quantified by immunostaining, and increased mineralization observed by von Kossa staining. Osteogenic intracellular signalling is also induced, with increased activity in the SMAD pathway. The study emphasizes the need of recapitulating the complexity of native ECM to achieve optimal cell-material interactions.

•

Vitronectin can be incorporated within fibronectin fibril networks upon co-coating onto poly (ethyl acrylate) modified surfaces.

•

Fibronectin and vitronectin networks promote mesenchymal stem cell adhesion and induce α5 integrin clustering.

•

Fibronectin and vitronectin nanonetworks improve bone morphogenetic protein-2 presentation to mesenchymal stem cells and thus facilitates osteogenesis.

Aptamer/Hydroxyapatite-Functionalized Titanium Substrate Promotes Implant Osseointegration via Recruiting Mesenchymal Stem Cells

Endowing bone regeneration materials with both stem cell recruitment and osteoinduction properties is a key factor in promoting osseointegration of titanium (Ti) implants. In this study, Apt19s-grafted oxidized hyaluronic acid (OHA) was deposited onto a protein-mediated biomineralization hydroxyapatite (HAp) coating of Ti. HAp was achieved by the treatment of lysozyme and tris(2-carboxyethyl) phosphonate mixture and then soaked in calcium ion (Ca²⁺) solution to obtain functional Ti substrate (Ti/HAp/OHA-Apt). In vitro studies confirmed that Ti/HAp/OHA-Apt could effectively maintain the sustained release of Apt19s from Ti for 7 days. The released Apt19s significantly enhanced the migration of bone marrow mesenchymal stem cells (MSCs), which was reflected by the experiment of transwell assay, wound healing, and zymogram detection. Compared with pure Ti, Ti/HAp/OHA-Apt was able to adjust the adsorption of functional proteins at the Ti-based interface to expose their active sites, which significantly increased the expression of adhesion-associated proteins (vinculin and tensin) in MSCs to promote their adhesion on Ti-based interface. In vitro cell experiments of alkaline phosphatase activity staining, mineralization detection, and expression of osteogenesis-related genes showed that Ti/HAp/OHA-Apt significantly enhanced the osteogenic differentiation ability of MSCs, which may be highly related to the porous structure of hydroxyapatite on Ti interface. In vivo test of Micro-CT, H&E staining, and histochemical staining further confirmed that Ti/HAp/OHA-Apt was able to promote MSC recruitment at the peri-implant interface to form new bone. This work provides a new approach to develop functional Ti-based materials for bone defect repair.

Fibronectin anchoring to viscoelastic poly(dimethylsiloxane) elastomers controls fibroblast mechanosensing and directional motility

The established link between deregulated tissue mechanics and various pathological states calls for the elucidation of the processes through which cells interrogate and interpret the mechanical properties of their microenvironment. In this work, we demonstrate that changes in the presentation of the extracellular matrix protein fibronectin on the surface of viscoelastic silicone elastomers have an overarching effect on cell mechanosensing, that is independent of bulk mechanics. Reduction of surface hydrophilicity resulted in altered fibronectin adsorption strength as monitored using atomic force microscopy imaging and pulling experiments. Consequently, primary human fibroblasts were able to remodel the fibronectin coating, adopt a polarized phenotype and migrate directionally even on soft elastomers, that otherwise were not able to resist the applied traction forces. The findings presented here provide valuable insight on how cellular forces are regulated by ligand presentation and used by cells to probe their mechanical environment, and have implications on biomaterial design for cell guidance.

Adsorption characteristics of peptides on ω-functionalized self-assembled monolayers: a molecular dynamics study

Molecular dynamics simulations were employed to investigate the adsorption behavior of a variety of amino-acid side-chain analogs (SCAs) and a β-hairpin (HP7) peptide on a series of liquid-like self-assembled monolayers (SAMs) with terminal functional groups of -OH, -OCH₃, -CH₃, and -CF₃. The relationships between the adsorption free energy of the SCAs and the interfacial properties of water on the SAMs were examined to determine the acute predictors of protein adsorption on the SAM surfaces. The structural changes of HP7 on the SAM surfaces were also investigated to understand the relationship between the surface nature and protein denaturation. It was found that the adsorption free energy of the SCAs was linearly related to the surface hydrophobicity, which was computed as the free energy of cavity formation near the SAM-water interfaces. In addition, the hydrophobic -CH₃ and -CF₃ SAMs produced substantial conformational changes in HP7 because of the strong hydrophobic attractions to the nonpolar side chains. The hydrophilic surface terminated by -OH also promoted structural changes in HP7 resulting from the formation of hydrogen bonds between the hydrophilic tail and HP7. Consequently, the moderate amphiphilic surface terminated by -OCH₃ avoided the denaturation of HP7 most efficiently, thus improving the biocompatibility of the surface. In conclusion, these results provide a deep understanding of protein adsorption for a wide range of polymeric surfaces, and they can potentially aid the design of appropriate biocompatible coatings for medical applications.

Understanding Myoblast Differentiation Pathways When Cultured on Electroactive Scaffolds through Proteomic Analysis

Electroactive materials allow the modulation of cell-materials interactions and cell fate, leading to advanced tissue regeneration strategies. Nevertheless, their effect at the cellular level is still poorly understood. In this context, the proteome analysis of C2C12 cell differentiation cultured on piezoelectric polymer films with null average surface charge (non-poled), net positive surface charge (poled +), and net negative surface charge (poled -) has been addressed. Protein/pathway alterations for skeletal muscle development were identified comparing proteomic profiles of C2C12 cells differentiated on poly(vinylidene fluoride), with similar cells differentiated on a polystyrene plate (control), using label-free liquid chromatography-tandem mass spectrometry (LC-MS/MS). Only significantly expressed proteins (P < 0.01, analysis of variance) were used for bioinformatic analyses. A total of 37 significantly expressed proteins were detected on the C2C12 proteome with PVDF "poled -" at 24 h, whereas on the PVDF "poled +", a total of 105 significantly expressed proteins were considered. At 5 days of differentiation, the number of significantly expressed proteins decreased to 23 and 31 in cells grown on negative and positive surface charge, respectively, the influence of surface charge being more explicit in some proteins. In both cases, proteins such as Fbn1, Hspg2, Rcn3, Tgm2, Mylpf, Anxa2, and Anxa6, involved in calcium-related signaling, were highly expressed during myoblast differentiation. Furthermore, some proteins involved in muscle contraction (Acta2, Anxa2, and Anxa6) were detected in the PVDF "poled +" sample. Upregulation of several proteins that enhance skeletal muscle development was detected in the PVDF "poled -" sample, including Ckm (422%), Tmem14c (384%), Serpinb6a (460%), adh7 (199%), and Car3 (171%), while for the "poled +" samples, these proteins were also upregulated at a smaller magnitude (254, 317, 253, 123, and 72%, respectively). Other differentially expressed proteins such as Mylpf (189%), Mybph (168%), and Mbnl1 (168%) were upregulated only in PVDF "poled -" samples, while Hba-a1 levels (581%) were increased in the PVDF "poled +" sample. On the other hand, cells cultured on non-poled samples have no differences with respect to the ones cultured on the control, in contrary to the poled films, with overall surface charge, demonstrating the relevance of scaffold surface charge on cell behavior. This study demonstrates that both positive and negative overall surface charges promote the differentiation of C2C12 cells through involvement of proteins related with the contraction of the skeletal muscle cells, with a more pronounced effect with the negative charged surfaces.

An Extracellular Matrix-Liposome Composite, a Novel Extracellular Matrix Delivery System for Accelerated Tissue Regeneration

The unfolded states of fibronectin (FN) subsequently induce the formation of an extracellular matrix (ECM) fibrillar network, which is necessary to generate new substitutive tissues. Here, the authors demonstrate that negatively charged small unilamellar vesicles (SUVs) qualify as candidates for FN delivery due to their remarkable effects on the autonomous binding and unfolding of FN, which leads to increased tissue regeneration. In vitro experiments revealed that the FN-SUV complex remarkably increased the attachment, differentiation, and migration of fibroblasts. The potential utilization of this complex in vivo to treat inflammatory colon diseases is also described based on results obtained for ameliorated conditions in rats with ulcerative colitis (UC) that had been treated with the FN-SUV complex. Their findings provide a new ECM-delivery platform for ECM-based therapeutic applications and suggest that properly designed SUVs may be an unprecedented FN-delivery system that is highly effective in treating UC and inflammatory bowel diseases.

Poly-L-Lysine and Human Plasmatic Fibronectin Films as Proactive Coatings to Improve Implant Biointegration

The success of stable and long-term implant integration implies the promotion, control, and respect of the cell microenvironment at the site of implantation. The key is to enhance the implant–host tissue cross talk by developing interfacial strategies that guarantee an optimal and stable seal of soft tissue onto the implant, while preventing potential early and late infection. Indeed, implant rejection is often jeopardized by lack of stable tissue surrounding the biomaterial combined with infections which reduce the lifespan and increase the failure rate of implants and morbidity and account for high medical costs. Thin films formed by the layer-by-layer (LbL) assembly of oppositely charged polyelectrolytes are particularly versatile and attractive for applications involving cell–material contact. With the combination of the extracellular matrix protein fibronectin (Fn, purified from human plasma) and poly-L-lysine (PLL, exhibiting specific chain lengths), we proposed proactive and biomimetic coatings able to guarantee enhanced cell attachment and exhibiting antimicrobial properties. Fn, able to create a biomimetic interface that could enhance cell attachment and promote extracellular cell matrix remodeling, is incorporated as the anionic polymer during film construction by the LbL technic whereas PLL is used as the cationic polymer for its capacity to confer remarkable antibacterial properties.

Favorable osteogenic activity of iron doped in silicocarnotite bioceramic: In vitro and in vivo Studies

Background

Methods

Results

Conclusion

The translational potential of this article

Fibronectin-Enriched Biomaterials, Biofunctionalization, and Proactivity: A Review

Modern innovation in reconstructive medicine implies the proposition of material-based strategies suitable for tissue repair and regeneration. The development of such systems necessitates the design of advanced materials and the control of their interactions with their surrounding cellular and molecular microenvironments. Biomaterials must actively engage cellular matter to direct and modulate biological responses at implant sites and beyond. Indeed, it is essential that a true dialogue exists between the implanted device and the cells. Biomaterial engineering implies the knowledge and control of cell fate considering the globality of the adhesion process, from initial cell attachment to differentiation. The extracellular matrix (ECM) represents a complex microenvironment able to meet these essential needs to establish a relationship between the material and the contacting cells. The ECM exhibits specific physical, chemical, and biochemical characteristics. Considering the complexity, heterogeneity, and versatility of ECM actors, fibronectin (Fn) has emerged among the ECM protagonists as the most pertinent representative key actor. The following review focuses on and synthesizes the research supporting the potential to use Fn in biomaterial functionalization to mimic the ECM and enhance cell–material interactions.

Biomimetic 3D-printed PCL scaffold containing a high concentration carbonated-nanohydroxyapatite with immobilized-collagen for bone tissue engineering: enhanced bioactivity and physicomechanical characteristics

A challenging approach of three-dimensional (3D)-biomimetic scaffold design for bone tissue engineering is to improve scaffold bioactivity and mechanical properties. We aimed to design and fabricate 3D-polycaprolactone (PCL)-based nanocomposite scaffold containing a high concentration homogeneously distributed carbonated-nanohydroxyapatite (C-nHA)-particles in combination with immobilized-collagen to mimic real bone properties. PCL-scaffolds without/with C-nHA at 30%, 45%, and 60% (wt/wt) were 3D-printed. PCL/C-nHA60%-scaffolds were surface-modified by NaOH-treatment and collagen-immobilization. Physicomechanical and biological properties were investigated experimentally and by finite-element (FE) modeling. Scaffold surface-roughness enhanced by increasing C-nHA (1.7 - 6.1-fold), but decreased by surface-modification (0.6-fold). The contact angle decreased by increasing C-nHA (0.9 - 0.7-fold), and by surface-modification (0.5-fold). The zeta potential decreased by increasing C-nHA (3.2-9.9-fold). Average elastic modulus, compressive strength, and reaction force enhanced by increasing C-nHA and by surface-modification. FE modeling revealed that von Mises stress distribution became less homogeneous by increasing C-nHA, and by surface-modification. Maximal von Mises stress for 2% compression strain in all scaffolds did not exceed yield stress for bulk-material. 3D-printed PCL/C-nHA60% with surface-modification enhanced pre-osteoblast spreading, proliferation, collagen deposition, alkaline phosphatase activity, and mineralization. In conclusion, a novel biomimetic 3D-printed PCL-scaffold containing a high concentration C-nHA with surface-modification was successfully fabricated. It exhibited superior physicomechanical and biological properties, making it a promising biomaterial for bone tissue engineering.

Adsorption Force of Fibronectin: A Balance Regulator to Transmission of Cell Traction Force and Fluid Shear Stress

Osteoblasts actively generate cell traction force (CTF) to sense chemical and mechanical microenvironments. Fluid shear stress (FSS) is a principle mechanical stimulus for bone modeling/remodeling. FSS and CTF share common interconnected elements for force transmission, among which the role of the protein-material interfacial force (F_ad) remains unclear. Here, we found that, on the low F_ad surface (5.47 ± 1.31 pN/FN), CTF overwhelmed F_ad to partially desorb FN, and FSS exacerbated the desorption, resulting in disassembly of the actin cytoskeleton and focal adhesions (FAs) to reduce CTF and establishment of a new mechanical balance at the FN-material interface. Contrarily, on the high F_ad surface (27.68 ± 5.24 pN/FN), pure CTF or the combination of CTF and FSS induced no FN desorption, and FSS promoted assembly of actin cytoskeletons and disassembly of FAs, regaining new mechanical balance at the cell-FN interface. These results indicate that F_ad is a mechanical regulator for transmission of CTF and FSS, which has never been reported before.

Dual effect of molecular mobility and functional groups of polyrotaxane surfaces on the fate of mesenchymal stem cells

Polyrotaxanes are supramolecular assemblies consisting of cyclic molecules (e.g., α-cyclodextrins) and linear polymer chains (e.g., poly[ethylene glycol]), in which cyclic molecules can move along the polymer chain. Here, we examined the effect of functional groups introduced into the α-cyclodextrins of polyrotaxane on cell responses such as adhesion, proliferation, and differentiation. Polyrotaxane-based triblock copolymers modified with methyl (CH3, hydrophobic, and nonionic), hydroxy (OH, hydrophilic and nonionic), amino (NH2, cationic), and sulfo (SO3H, anionic) groups were coated on the surface of the culture plate to fabricate polyrotaxane surfaces with different surface chemistries. The chemical compositions of each surface were determined via time-of-flight secondary ion mass spectrometry and X-ray photoelectron spectroscopy. The contact angle hysteresis reflecting the molecular mobility and zeta potential of each polyrotaxane surface changed depending on the functional groups. When osteoblast and adipocyte differentiation was induced in human mesenchymal stem cells cultured on each polyrotaxane surface, the cells adhered to the SO3H-modified polyrotaxane surfaces exhibited osteoblast differentiation, whereas the cells adhered to the OH-, NH2-, and SO3H-modified polyrotaxane surfaces preferentially underwent adipocyte differentiation compared with those on the unmodified and CH3-modified polyrotaxane surfaces. Interestingly, the SO3H-modified polyrotaxane surfaces promoted both osteoblast and adipocyte differentiation. High molecular mobility and negative charge on the SO3H-modified polyrotaxane surfaces are expected to contribute to the facilitation of both osteoblast and adipocyte differentiation.

Effects of titanium with different micro/nano structures on the ability of osteoblasts to resist oxidative stress

Excessive accumulation of oxidative intermediates in the elderly significantly aggravates bone degradation and hinders the osseointegration of topological titanium (Ti) implants. Thus, it is of great significance to evaluate the antioxidant and osteoinduction capabilities of various nano, micro or micro/nano-composite structures under oxidative stress (OS) microenvironment. In this study, we discovered that 110 nm titania nanotubes (TNTs) enhanced the adsorption of fibronectin (FN) proteins onto smooth and rough titanium surfaces to varying degrees. Compared with Ti and 30 nm TNTs (T₃₀) groups, cells on 110 nm TNTs (T₁₁₀), microstructure/30 nm TNTs (M₃₀) and microstructure/110 nm TNTs (M₁₁₀) had smaller area, lower reactive oxygen species (ROS), and better proliferation/osteogenic differentiation abilities under OS condition, but there was no significant difference among the three groups. In addition, combined with our previous study, we suggested that T₁₁₀, M₃₀ and M₁₁₀ resistance to OS was also strongly associated with the high expression of FN-receptor integrin α5 or β1. All the findings indicated that the micro/nano-composed structures (M₃₀ & M₁₁₀) had similar anti-oxidation and osteogenesis abilities to T₁₁₀, which provided guidance for the application of different titanium implants with different topologies in the elderly.

A new mechanism for reduced cell adhesion: Adsorption dynamics of collagen on a nanoporous gold surface

Nanostructured materials such as nanoparticles and nanoporous materials strongly affect cell behaviors such as cell viability. Because cellular uptake of nanoporous materials does not occur, mechanisms for the effects of nanoporous materials on cells are different from those of nanoparticles. The effects of nanoporous materials on cells are thought to result from large conformational changes in the extracellular matrix (ECM) induced by the nanoporous materials, although the mechanotransduction and the critical focal adhesion cluster size also have an effect on the cell response. However, we show that the adhesion of mesenchymal stem cells to a gold surface is reduced for nanoporous gold (NPG), despite the conformational changes in collagen induced by NPG being below the detection limits of the experimental analyses. The adsorption dynamics of collagen on NPG are investigated by molecular dynamics simulations to determine the origin of the reduced cell adhesion to NPG. The adsorption energy of collagen on NPG is lower than that on flat gold (FG) despite there being little difference between the global conformation of collagen segments adsorbed on NPG compared with FG. This finding is related to the surface strain of NPG and the limited movement of collagen amino acids owing to interchain hydrogen bonds. The results obtained in this study provide new insight into the interactions between nanostructured materials and the ECM.

The Body's Cellular and Molecular Response to Protein-Coated Medical Device Implants: A Review Focused on Fibronectin and BMP Proteins

Recent years have seen a marked rise in implantation into the body of a great variety of devices: hip, knee, and shoulder replacements, pacemakers, meshes, glucose sensors, and many others. Cochlear and retinal implants are being developed to restore hearing and sight. After surgery to implant a device, adjacent cells interact with the implant and release molecular signals that result in attraction, infiltration of the tissue, and attachment to the implant of various cell types including monocytes, macrophages, and platelets. These cells release additional signaling molecules (chemokines and cytokines) that recruit tissue repair cells to the device site. Some implants fail and require additional revision surgery that is traumatic for the patient and expensive for the payer. This review examines the literature for evidence to support the possibility that fibronectins and BMPs could be coated on the implants as part of the manufacturing process so that the proteins could be released into the tissue surrounding the implant and improve the rate of successful implantation.

The osteogenesis performance of titanium modified via plasma-enhanced chemical vapor deposition: in vitro and in vivo studies

Titanium (Ti) and its alloys are widely used in dental implants due to their favorable mechanical properties and biocompatibility. Surface characteristics, including physical and chemical properties, are crucial factors to enhance the osteogenesis performance of Ti. The aim of this study is to evaluate amino group surface modification to facilitate the osteogenic potential and bone repair of dental implants both in vitro and in vivo. Herein, amino group-modified Ti surfaces were constructed via the plasma-enhanced chemical vapor deposition (PECVD) technique with an allylamine monomer. The adhesion, proliferation, alkaline phosphate activity and osteogenesis-related genetic expression of MG-63 cells on the surfaces were performed in vitro and presented a significant increase in amino group-modified Ti compared with that in Ti. The in vivo study in miniature pigs was evaluated through micro-computed tomography analysis and histological evaluation, which exhibited enhanced new bone formation in amino group-modified Ti compared with that in Ti after implantation for 4, 8 and 12 weeks. Consequently, amino group surface modification with the PECVD technique may provide a promising modification method to enhance the osteogenesis performance of Ti implants.

Biological responses to physicochemical properties of biomaterial surface

Biomedical scientists use chemistry-driven processes found in nature as an inspiration to design biomaterials as promising diagnostic tools, therapeutic solutions, or tissue substitutes. While substantial consideration is devoted to the design and validation of biomaterials, the nature of their interactions with the surrounding biological microenvironment is commonly neglected. This gap of knowledge could be owing to our poor understanding of biochemical signaling pathways, lack of reliable techniques for designing biomaterials with optimal physicochemical properties, and/or poor stability of biomaterial properties after implantation. The success of host responses to biomaterials, known as biocompatibility, depends on chemical principles as the root of both cell signaling pathways in the body and how the biomaterial surface is designed. Most of the current review papers have discussed chemical engineering and biological principles of designing biomaterials as separate topics, which has resulted in neglecting the main role of chemistry in this field. In this review, we discuss biocompatibility in the context of chemistry, what it is and how to assess it, while describing contributions from both biochemical cues and biomaterials as well as the means of harmonizing them. We address both biochemical signal-transduction pathways and engineering principles of designing a biomaterial with an emphasis on its surface physicochemistry. As we aim to show the role of chemistry in the crosstalk between the surface physicochemical properties and body responses, we concisely highlight the main biochemical signal-transduction pathways involved in the biocompatibility complex. Finally, we discuss the progress and challenges associated with the current strategies used for improving the chemical and physical interactions between cells and biomaterial surface.

Single-molecule measurement and bioinformatics analysis suggest a preferred orientation of human coagulation factor VIII on hydrophobic interfaces

Investigating the adsorption behavior of coagulation proteins on interfaces will contribute to better understating blood clotting and to the development of biocompatible materials. In this work, atomic force microscopy (AFM)-based peakforce quantitative nanomechanical mapping (PF-QNM) was combined with bioinformatics tool to study the adsorption and orientation of coagulation factor VIII (FVIII) on both hydrophilic and hydrophobic interfaces by the height and mechanical measurement of single protein molecules. We found that interfacial hydrophilicity/hydrophobicity greatly influence the heights and Young's modulus of individual proteins. Compared to on the hydrophilic mica surface, FVIII proteins appear bigger vertical sizes while similar lateral sizes on the HOPG surface. The water accessible surface area analysis indicate stronger apolar properties C1 and C2 domains than others, suggesting a preferred orientation through the strong hydrophobic interactions between HOPG and the hydrophobic residues interface of the protein domains. These results provide novel insights on the adsorption and binding mechanism of the FVIII on cell membrane and will be helpful for the design of anticoagulant materials.

Shape recovery strain and nanostructures on recovered polyurethane films and their regulation to osteoblasts morphology

Shape memory polyurethanes (SMPUs) have emerged as novel dynamic substrates to regulate cell alignment, in which recovery-induced change in substrates topography has been described as the major contributor. This work, for the first time, confirmed the pivotal roles of recovery strain and phase-separated nanostructures of SMPUs in regulating cell morphology. SMPU films with different stretching ratios (0%, 50%, 100%, and 200%) were found to produce an average recovery strain from 19.41% to 34.04% within 2 h in dulbecco's modified eagle medium (DMEM). Meanwhile, the assembly of hard domains was enhanced during shape recovery, leading to the reorientation of fibrillar apophyses (i.e., nanostructures). Further observation of osteoblast morphology revealed that recovery strain resulted in perpendicular orientation of osteoblasts to strain direction. With the extension of incubation time (24 h), however, the perpendicular orientation was transformed to follow the nanostructures on recovered films, suggesting that the nanostructures might become the determinant of the long-term cell orientation. This study provides a biomechanics-based perspective to understand the dynamic interactions between SMPU and cells, which can help to guide the design of SMPU for specific biomedical applications.

Unveiling the Mechanism of Surface Hydrophilicity-Modulated Macrophage Polarization

With inflammation increasingly recognized as a key factor that influences fracture healing, the immunologic response is considered to play a pivotal role in determining implant-mediated osteogenesis. Herein, this paper demonstrates that modification of the surface hydrophilicity of Ti surface oxides can be utilized to control immune response by steering the macrophage polarization toward pro- or anti-inflammation phenotype. Enhanced anti-inflammatory and prohealing performance of macrophages is observed on hydrophilic surfaces compared to hydrophobic ones. Further study on the detailed mechanism demonstrates that the surface hydrophilicity controls specific proteins (fibronectin and fibrinogen) adsorption and conformation, which activate different signaling pathways (PI3K and NF-κB) through selective expression of integrin β1 or β2 to influence the behaviors of macrophages. Thus, this study presents a mechanism of macrophage polarization modulated by surface hydrophilicity for the surface design of advanced implant materials with satisfactory anti-inflammatory and osteogenesis-promoting properties.

The strength of the protein-material interaction determines cell fate

Extracellular matrix (ECM) proteins are key mediators of cell/material interactions. The surface density and conformation of these proteins adsorbed on the material surface influence cell adhesion and the cellular response. We have previously shown that subtle variations in surface chemistry lead to drastic changes in the conformation of adsorbed fibronectin (FN). On poly(ethyl acrylate) (PEA), FN unfolds and displays domains for cell adhesion and FN-FN interaction, whereas on poly(methyl acrylate) (PMA) - with only one methyl group less - FN remains globular as it is in solution. The effect of the strength of the protein/material interaction in cell response, and its relation to protein density and conformation, has received limited attention so far. In this work, we used FN-functionalized AFM cantilevers to evaluate, via force spectroscopy, the strength of interaction between fibronectin and the underlying polymer which controls FN conformation (PEA and PMA). We found that the strength of FN/PEA interaction is significantly higher than FN/PMA, which limits the mobility of FN layer on PEA, reduces the ability of cells to mechanically reorganize FN and then leads to enhanced proteolysis and degradation of the surrounding matrix with compromised cell viability. By contrast, both PEA and PMA support cell adhesion when FN density is increased and also in the presence of serum or other serum proteins, including vitronectin (VN) and bovine serum albumin (BSA), which provide a higher degree of mobility to the matrix.

STATEMENT OF SIGNIFICANCE

The identification of parameters influencing cell response is of paramount importance for the design of biomaterials that will act as synthetic scaffolds for cells to anchor, grow and, eventually, become specialised tissues. Cells interact with materials through an intermediate layer of proteins adsorbed on the material surface. It is known that the density and conformation of these proteins determine cell behaviour. Here we show that the strength of protein/material interactions, which has received very limited attention so far, is key to understand the cellular response to biomaterials. Very strong protein/material interactions reduce the ability of cells to mechanically reorganize proteins at the material interface which results in enhanced matrix degradation, leading ultimately to compromised cell viability.

Role of Ninth Type-III Domain of Fibronectin in the Mediation of Cell-Binding Domain Adsorption on Surfaces with Different Chemistries

The orientation and conformation of adhesive proteins after adsorption play a central role in cell-binding bioactivity. Fibronectin (Fn) holds two peptide sequences that favor cell adhesion: the Arg-Gly-Asp (RGD) loop on the tenth type-III domain (Fn-III₁₀) and the Pro-His-Ser-Arg-Asn (PHSRN) synergy site on the ninth type-III domain (Fn-III₉). Herein, adsorption of Fn fragments (Fn-III₁₀ and Fn-III_9-10) on self-assembled monolayers (SAMs) carrying various functional groups (-COOH, -NH₂, -CH₃, and -OH) was investigated by the Monte Carlo method and molecular dynamics simulation in order to understand its mediation effect on cell adhesion. The results demonstrated that Fn-III₉ could enhance the stiffness of the Fn molecule and further fix the adsorption orientation. The RGD site of the Fn fragment appeared to be deactivated on hydrophobic surfaces (CH₃-SAM) because of the binding of adjacent nonpolar residues on surfaces, whereas charged surfaces (COOH-SAM and NH₂-SAM) and hydrophilic surfaces (OH-SAM) were conducive to the formation of cell-binding-favorable orientation for Fn fragments. The cell adhesion capability of Fn fragments was highly improved on positively charged surfaces (NH₂-SAM) and hydrophilic surfaces because of the advantageous steric structure and orientation of both RGD and PHSRN sites. This work provides an insight into the interplay at the atomic scale between protein adsorption and surface chemistry for designing biologically responsive substrate surfaces.

The optimization and production of stable homogeneous amine enriched surfaces with characterized nanotopographical properties for enhanced osteoinduction of mesenchymal stem cells

Silane modification has been proposed as a powerful biomaterial surface modification tool. This is the first comprehensive investigation into the effect of silane chain length on the resultant properties of -NH₂ silane monolayers and the associated osteoinductive properties of the surface. A range of -NH₂ presenting silanes, chain length 3-11, were introduced to glass coverslips and characterized using water contact angles, atomic force microscopy, X-ray photoelectron spectroscopy, and Ninhydrin assays. The ability of the variation in chain length to form a homogenous layer across the entirety of the surfaces was also assessed. The osteoinductive potential of the resultant surfaces was evaluated by real-time polymerase chain reaction, immunocytochemistry, and von Kossa staining. Control of surface chemistry and topography was directly associated with changes in chain length. This resulted in the identification of a specific, chain length 11 (CL11) which significantly increased the osteoinductive properties of the modified materials. Only CL11 surfaces had a highly regular nano-topography/roughness which resulted in the formation of an appetite-like layer on the surface that induced a significantly enhanced osteoinductive response (increased expression of osteocalcin, CBFA1, sclerostin, and the production of a calcified matrix) across the entirety of the surface. © 2018 The Authors Journal of Biomedical Materials Research Part A Published by Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1862-1877, 2018.

Single Molecule Force Spectroscopy Reveals Two-Domain Binding Mode of Pilus-1 Tip Protein RrgA of Streptococcus pneumoniae to Fibronectin

For host cell adhesion and invasion, surface piliation procures benefits for bacteria. A detailed investigation of how pili adhere to host cells is therefore a key aspect in understanding their role during infection. Streptococcus pneumoniae TIGR 4, a clinical relevant serotype 4 strain, is capable of expressing pilus-1 with terminal RrgA, an adhesin interacting with host extracellular matrix (ECM) proteins. We used single molecule force spectroscopy to investigate the binding of full-length RrgA and single RrgA domains to fibronectin. Our results show that full-length RrgA and its terminal domains D3 and D4 bind to fibronectin with forces of 51.6 (full length), 52.8 (D3), and 46.2 pN (D4) at force-loading rates of around 1500 pN/s. Selective saturation of D3 and D4 binding sites on fibronectin showed that both domains can interact simultaneously with fibronectin, revealing a two-domain binding mechanism for the pilus-1 tip protein. The high off rates and the corresponding short lifetime of the RrgA Fn bond (τ = 0.26 s) may enable piliated pneumococci to form and maintain a transient contact to fibronectin-containing host surfaces and thus to efficiently scan the surface for specific receptors promoting host cell adhesion and invasion. These molecular properties could be essential for S. pneumoniae pili to mediate initial contact to the host cells and-shared with other piliated Gram-positive bacteria-favor host invasion.

The osteoimmunomodulatory properties of MBG scaffold coated with amino functional groups

Mesoporous bioactive glass (MBG) is a good scaffold for bone regeneration. In this study, amino functionalized MBG (N-MBG) was used as a model scaffold to examine the effect of the scaffold to bone marrow stromal cells (BMSCs) and macrophages. The MTT results revealed that the proliferation of BMSCs from ovariectomized rabbits was enhanced by N-MBG. Compared to the control group, the expression of osteogenic genes was significantly enhanced by N-MBG, which was related to CaSR pathway. Meanwhile, the anti-inflammatory cytokines (interleukin-10 and arginase-1) were also upregulated by N-MBG stimulation compared with MBG. Furthermore, the amino functionalization of MBG resulted in an increase in the pH value of the material extract. Interestingly, the formation of TRAP⁺ multinuclear cells was inhibited by the slightly alkaline extract to a certain extent, which reasonably explained the increase in TRAP⁺ multinuclear cells after adjusting the pH value of N-MBG extract. In vivo, the areas of new bone formation in the maxillary sinus floor elevation were increased in the N-MBG/BMSCs group with less TRAP⁺ multinuclear cells compared with the MBG/BMSCs group. These findings provided valuable insight that the osteogenic ability of MBG scaffold could be enhanced by amino functionalization due to coordinate BMSCs and macrophages differentiation.

The interfacial pH of acidic degradable polymeric biomaterials and its effects on osteoblast behavior

A weak alkaline environment is established to facilitate the growth of osteoblasts. Unfortunately, this is inconsistent with the application of biodegradable polymer in bone regeneration, as the degradation products are usually acidic. In this study, the variation of the interfacial pH of poly (D, L-lactide) and piperazine-based polyurethane ureas (P-PUUs), as the representations of acidic degradable materials, and the behavior of osteoblasts on these substrates with tunable interfacial pH were investigated in vitro. These results revealed that the release of degraded products caused a rapid decrease in the interfacial pH, and this could be relieved by the introduction of alkaline segments. On the contrary, when culturing with osteoblasts, the variation of the interfacial pH revealed an upward tendency, indicating that cell could construct the microenvironment by secreting cellular metabolites to satisfy its own survival. In addition, the behavior of osteoblasts on substrates exhibited that P-PUUs with the most PP units were better for cell growth and osteogenic differentiation of cells. This is due to the hydrophilic surface and the moderate N% in P-PUUs, key factors in the promotion of the early stages of cellular responses, and the interfacial pH contributing to the enhanced effect on osteogenic differentiation.

Strontium-doped calcium silicate bioceramic with enhanced in vitro osteogenic properties

Gehlenite (GLN, Ca₂SiAl₂O₇) is a bioceramic that has been recently shown to possess excellent mechanical strength and in vitro osteogenic properties for bone regeneration. Substitutional incorporation of strontium in place of calcium is an effective way to further enhance biological properties of calcium-based bioceramics and glasses. However, such strategy has the potential to affect other important physicochemical parameters such as strength and degradation due to differences in the ionic radius of strontium and calcium. This study is the first to investigate the effect of a range of concentrations of strontium substitution of calcium at 1, 2, 5, 10 mol% (S1-GLN, S2-GLN, S5-GLN and S10-GLN) on the physicochemical and biological properties of GLN. We showed that up to 2 mol% strontium ion substitution retains the monophasic GLN structure when sintered at 1450 °C, whereas higher concentrations resulted in presence of calcium silicate impurities. Increased strontium incorporation resulted in changes in grain morphology and reduced densification when the ceramics were sintered at 1450 °C. Porous GLN, S1-GLN and S2-GLN scaffolds (∼80% porosity) showed compressive strengths of 2.05 ± 0.46 MPa, 1.76 ± 0.79 MPa and 1.57 ± 0.52 MPa respectively. S1-GLN and S2-GLN immersed in simulated body fluid showed increased strontium ion release but reduced calcium and silicon ion release compared to GLN without affecting overall weight loss and pH over a 21 d period. The bioactivity of the S2-GLN ceramics was significantly improved as reflected in the significant upregulation of HOB proliferation and differentiation compared to GLN. Overall, these results suggest that increased incorporation of strontium presents a trade-off between bioactivity and mechanical strength for GLN bioceramics. This is an important consideration in the development of strontium-doped bioceramics.

Enhanced osteogenic activity of anatase TiO2 film: Surface hydroxyl groups induce conformational changes in fibronectin

In this study, with an attempt to identify the effects of TiO₂ crystalline phase compositions on the osteogenic properties, the anatase and rutile TiO₂ thin films with similar film thickness, surface topography and hydrophilicity were prepared on Si (100) substrates by atomic layer deposition (ALD), subsequent thermal annealing and ultraviolet irradiation. The films were studied with XRD, XPS, FE-SEM, AFM, FTIR and contact angle measurements. In vitro cellular assays showed that the anatase phase led to better osteoblast compatibility in terms of adhesion, proliferation, differentiation, mineralization as well as osteogenesis-related gene expression when compared with the rutile phase. We investigated the difference between the anatase and rutile TiO₂ films at the biomolecular level to explain the enhanced osteogenic activity of the anatase film. It was found that the presence of more TiOH groups on anatase surface induced more cell-binding sites of fibronectin (FN) exposed on its surface, causing a more active conformation of the adsorbed FN for subsequent osteoblast behaviors.

Confinement effect on the structure and elasticity of proteins interfacing polymers

The ordered nanostructured surfaces provide confined environments that allow functionalization of proteins. Here, we used the nanopores of poly(methyl methacrylate) films to attach fibrinogen and lysozyme, and discussed the changes in proteins' structures and elasticity upon confinement. Fourier-transform infrared spectroscopic analysis of protein secondary structures reveals that fibrinogen undergoes less structural change and behaves less stiff when the pore size is close to the protein size. Lysozyme, on the other hand, retains its native-like structure, however, it exhibits the highest modulus in 15 nm pores due to the lower macromolecular crowding effect the protein faces compared to lysozyme within larger pores. These findings manifest the effect of confinement and crowding on the conformation and elasticity of different shaped proteins tethered on surfaces.

Multi-Component Microscaffold With 3D Spatially Defined Proteinaceous Environment

In this paper, we present a multicomponent microenvironment consisting of proteinaceous networks with submicron-sized features optionally embedded into a photoresist microscaffold. By two-photon direct laser writing, free-standing 3D proteinaceous microstructures were fabricated for cell culture application, demonstrated with NIH/3T3 fibroblast cells. A Young's modulus of megapascal-order contributes to the challenge of structural sustainability of the proteinaceous microstructures for experiments as well as sequential fabrication steps. We propose to embed proteinaceous networks into a mechanically robust photoresist microscaffold. We investigate the limits of this 3D microfabrication of embedded proteinaceous networks and demonstrate the embedment of two different proteinaceous networks within one microscaffold. Performing cell culture of PC12 cells, we observe cell adhesion and cell motility on embedded proteinaceous networks of collagen type-IV mixed with bovine serum albumin into a photoresist microscaffold. The ability to structure proteinaceous elements for 3D spatial control of microenvironment might be a key feature in cell culture to decouple environmental cues to control cellular behavior.

Surfaces Mimicking Glycosaminoglycans Trigger Different Response of Stem Cells via Distinct Fibronectin Adsorption and Reorganization

We report on the utility of a platform created by self-assembled monolayers to investigate the influence of the degree of sulfation of glycosaminoglycans (GAGs) on their interactions with fibronectin (Fn) and the impact of these interactions on the adhesion and morphology of human adipose derived stem cells (ASCs). We used the label-free QCM-D, AFM and SPR to follow the changes in the protein adlayer in close proximity to the substrates surface and QCM-D in combination with live imaging to characterize the adherent cells. Our results suggest that Fn interactions with GAGs are governed by both H-bonding and electrostatic forces. Strong electrostatic interactions cause irreversible change in the protein conformation, while the weaker H-bonding only partially restricts the protein flexibility, allowing Fn reorganization and exposure of its binding sites for ASC adhesion. These findings imply that a delicate balance between these two types of forces must be considered in the design of biomaterials that mimic GAGs.

Surface chemistry regulates the sensitivity and tolerability of osteoblasts to various magnitudes of fluid shear stress

Scaffolds provide a physical support for osteoblasts and act as the medium to transfer mechanical stimuli to cells. To verify our hypothesis that the surface chemistry of scaffolds regulates the perception of cells to mechanical stimuli, the sensitivity and tolerability of osteoblasts to fluid shear stress (FSS) of various magnitudes (5, 12, 20 dynes/cm² ) were investigated on various surface chemistries (-OH, -CH₃ , -NH₂ ), and their follow-up effects on cell proliferation and differentiation were examined as well. The sensitivity was characterized by the release of adenosine triphosphate (ATP), nitric oxide (NO) and prostaglandin E₂ (PGE₂ ) while the tolerability was by cellular membrane integrity. The cell proliferation was characterized by S-phase cell fraction and the differentiation by ALP activity and ECM expression (fibronectin and type I collagen). As revealed, osteoblasts demonstrated higher sensitivity and lower tolerability on OH and CH₃ surfaces, yet lower sensitivity and higher tolerability on NH₂ surfaces. Observations on the focal adhesion formation, F-actin organization and cellular orientation before and after FSS exposure suggest that the potential mechanism lies in the differential control of F-actin organization and focal adhesion formation by surface chemistry, which further divergently mediates the sensitivity and tolerability of ROBs to FSS and the follow-up cell proliferation and differentiation. These findings are essentially valuable for design/selection of desirable surface chemistry to orchestrate with FSS stimuli, inducing appropriate cell responses and promoting bone formation. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2978-2991, 2016.

Surface functionalization and dynamics of polymeric cell culture substrates

The promise of growing tissues to replace or improve the function of failing ones, a practice often referred to as regenerative medicine, has been driven in recent years by the development of stem cells and cell lines. Stem cells are typically cultured outside the body to increase cell number or differentiate the cells into mature cell types. In order to maximize the regenerative potential of these cells, there is a need to understand cell-material interactions that direct cell behavior and cell-material dynamics. Most synthetic surfaces used for growth and differentiation of cells in the lab are impractical and cost prohibitive in clinical labs. This review focuses on the modification of low cost polymer substrates that are already widely used for cell culture so that they may be used to control and understand cell-material interactions. In addition, we discuss the ability of cells to exert dynamic control over the microenvironment leading to a more complex, less controlled surface.

Stretching-induced nanostructures on shape memory polyurethane films and their regulation to osteoblasts morphology

Programming such as stretching, compression and bending is indispensible to endow polyurethanes with shape memory effects. Despite extensive investigations on the contributions of programming processes to the shape memory effects of polyurethane, less attention has been paid to the nanostructures of shape memory polyurethanes surface during the programming process. Here we found that stretching could induce the reassembly of hard domains and thereby change the nanostructures on the film surfaces with dependence on the stretching ratios (0%, 50%, 100%, and 200%). In as-cast polyurethane films, hard segments sequentially assembled into nano-scale hard domains, round or fibrillar islands, and fibrillar apophyses. Upon stretching, the islands packed along the stretching axis to form reoriented fibrillar apophyses along the stretching direction. Stretching only changed the chemical patterns on polyurethane films without significantly altering surface roughness, with the primary composition of fibrillar apophyses being hydrophilic hard domains. Further analysis of osteoblasts morphology revealed that the focal adhesion formation and osteoblasts orientation were in accordance with the chemical patterns of the underlying stretched films, which corroborates the vital roles of stretching-induced nanostructures in regulating osteoblasts morphology. These novel findings suggest that programming might hold great potential for patterning polyurethane surfaces so as to direct cellular behavior. In addition, this work lays groundwork for guiding the programming of shape memory polyurethanes to produce appropriate nanostructures for predetermined medical applications.

Simultaneous characterization of protein–material and cell–protein interactions using dynamic QCM-D analysis on SAM surfaces

QCM-D signal patterns can serve as rules of thumb for biomaterial development by simultaneously characterizing different protein–material and cell–protein interactions.

Preferential adsorption of cell adhesive proteins from complex media on self-assembled monolayers and its effect on subsequent cell adhesion

We examined the effect of surface chemistry on adsorption of fibronectin (Fn) and vitronectin (Vn) and subsequent cell adhesion, employing self-assembled monolayers (SAMs) of alkanethiols carrying terminal methyl (CH3), hydroxyl groups (OH), carboxylic acid (COOH), and amine (NH2). More Fn and Vn adsorbed to COOH- and NH2-SAMs than to CH3- and OH-SAMs from a mixture with bovine serum albumin (BSA) and from 2% fetal bovine serum. Adhesion of human umbilical vein endothelial cells (HUVECs) on CH3- and OH-SAMs preadsorbed with Fn and BSA decreased with decreasing adsorbed Fn; however, HUVECs adhered to COOH- and NH2-SAMs even in the presence of BSA at 1000-fold more than Fn in a mixture because of the preferential adsorption of Fn and/or displacement of preadsorbed BSA with Fn and Vn in a serum-containing medium. SAMs coated with a mixture of Vn and BSA exhibited adhesion of HUVECs regardless of surface functional groups. A well-organized focal adhesion complex and actin stress fibers were observed only for COOH- and NH2-SAMs when SAMs were preadsorbed with Vn and BSA. These results suggest that COOH- and NH2-SAMs allow for both cell adhesion and cell spreading because of the high density of cell-binding domains derived from adsorbed Vn.

STATEMENT OF SIGNIFICANCE

Adsorption of cell adhesive proteins including fibronectin (Fn) and vitronectin (Vn) plays an important role in cell adhesion to artificial materials. However, for the development of biomaterials that contact with biological fluids, it is important to understand adsorption of Fn and Vn in complex media containing many kinds of proteins. Here, we focused on adsorption of Fn and Vn from complex media including mixed solution with albumin and fetal bovine serum, and its role on cell adhesion using self-assembled monolayers (SAMs). Our result demonstrates that SAMs carrying carboxylic acid or amine allow for both cell adhesion and cell spreading because of preferentially adsorbed Vn. The result provides insights into surface design of cell culture substrates and tissue engineering scaffolds.