Osteogenic Differentiation of Human Bone Marrow Mesenchymal Stem Cells Seeded on Melt Based Chitosan Scaffolds for Bone Tissue Engineering Applications

A bioactive microparticle-loaded osteogenically enhanced bioprinted scaffold that permits sustained release of BMP-2

Extrusion-based bioprinting technology is widely used for tissue regeneration and reconstruction. However, the method that uses only hydrogel as the bioink base material exhibits limited biofunctional properties and needs improvement to achieve the desired tissue regeneration. In this study, we present a three-dimensionally printed bioactive microparticle-loaded scaffold for use in bone regeneration applications. The unique structure of the microparticles provided sustained release of growth factor for > 4 weeks without the use of toxic or harmful substances. Before and after printing, the optimal particle ratio in the bioink for cell viability demonstrated a survival rate of ≥ 85% over 7 days. Notably, osteogenic differentiation and mineralization-mediated by human periosteum-derived cells in scaffolds with bioactive microparticles-increased over a 2-week interval. Here, we present an alternative bioprinting strategy that uses the sustained release of bioactive microparticles to improve biofunctional properties in a manner that is acceptable for clinical bone regeneration applications.

Recent development in multizonal scaffolds for osteochondral regeneration

Osteochondral (OC) repair is an extremely challenging topic due to the complex biphasic structure and poor intrinsic regenerative capability of natural osteochondral tissue. In contrast to the current surgical approaches which yield only short-term relief of symptoms, tissue engineering strategy has been shown more promising outcomes in treating OC defects since its emergence in the 1990s. In particular, the use of multizonal scaffolds (MZSs) that mimic the gradient transitions, from cartilage surface to the subchondral bone with either continuous or discontinuous compositions, structures, and properties of natural OC tissue, has been gaining momentum in recent years. Scrutinizing the latest developments in the field, this review offers a comprehensive summary of recent advances, current hurdles, and future perspectives of OC repair, particularly the use of MZSs including bilayered, trilayered, multilayered, and gradient scaffolds, by bringing together onerous demands of architecture designs, material selections, manufacturing techniques as well as the choices of growth factors and cells, each of which possesses its unique challenges and opportunities.

Mineralization of Bone Extracellular Matrix-like Scaffolds Fabricated as Silk Sericin-Functionalized Dense Collagen–Fibrin Hybrid Hydrogels

The design of hydrogels that combine both the biochemical cues needed to direct seeded cellular functions and mineralization to provide the structural and mechanical properties approaching those of mineralized native bone extracellular matrix (ECM) represents a significant challenge in bone tissue engineering. While fibrous hydrogels constituting of collagen or fibrin (and their hybrids) can be considered as scaffolds that mimic to some degree native bone ECM, their insufficient mechanical properties limit their application. In the present study, an automated gel aspiration–ejection (automated GAE) method was used to generate collagen–fibrin hybrid gel scaffolds with micro-architectures and mechanical properties approaching those of native bone ECM. Moreover, the functionalization of these hybrid scaffolds with negatively charged silk sericin accelerated their mineralization under acellular conditions in simulated body fluid and modulated the proliferation and osteoblastic differentiation of seeded MC3T3-E1 pre-osteoblastic cells. In the latter case, alkaline phosphatase activity measurements indicated that the hybrid gel scaffolds with seeded cells showed accelerated osteoblastic differentiation, which in turn led to increased matrix mineralization. In summary, the design of dense collagen–fibrin hybrid gels through an automated GAE process can provide a route to tailoring specific biochemical and mechanical properties to different types of bone ECM-like scaffolds, and can provide a model to better understand cell–matrix interactions in vitro for bioengineering purposes.

Flaxseed mucilage/calcium phosphate composites as bioactive material for bone tissue regeneration

Biocompatible polymers are attractive material for the manufacturing of surgical implants which break down in vivo without the necessity for a consequent operation for removal. Elaboration of composite biomaterials scaffolds as artificial bone graft materials remains a major task in bioengineering. Flaxseed mucilage was used as bioactive polysaccharide for preparing composite scaffolds made of calcium phosphate embedded in mucilage matrix. Calcium chloride was mixed with mucilage followed by the addition of phosphate precursor to stimulate the in situ formation of calcium phosphate. The obtained scaffolds mucilage/calcium phosphate at different pHs (5 and 8) were characterized using FTIR, XRD, TGA, SEM/EDX and TEM. The results showed the formation of two phases: mucilage/dicalcium phosphate dihydrate (MU/brushite) and mucilage/hydroxyapatite (MU/HA). MTT test was applied to evaluate viability of MC3T3-E1 osteoblasts cells, and the formed hybrids at various pH conditions were classified as non-cytotoxic. These findings establish the potential of developed composite to be used as bone graft substitute materials.

Nanomaterials-Incorporated Chemically Modified Gelatin Methacryloyl-Based Biomedical Composites: A Novel Approach for Bone Tissue Engineering

Gelatin methacryloyl (GelMA)-based composites are evolving three-dimensional (3D) networking hydrophilic protein composite scaffolds with high water content. These protein composites have been devoted to biomedical applications due to their unique abilities, such as flexibility, soft structure, versatility, stimuli-responsiveness, biocompatibility, biodegradability, and others. They resemble the native extracellular matrix (ECM) thanks to their remarkable cell-adhesion and matrix-metalloproteinase (MMP)-responsive amino acid motifs. These favorable properties promote cells to proliferate and inflate within GelMA-protein scaffolds. The performance of GelMA composites has been enriched using cell-amenable components, including peptides and proteins with a high affinity to harmonize cellular activities and tissue morphologies. Due to their inimitable merits, GelMA systems have been used in various fields such as drug delivery, biosensor, the food industry, biomedical, and other health sectors. The current knowledge and the role of GelMA scaffolds in bone tissue engineering are limited. The rational design and development of novel nanomaterials-incorporated GelMA-based composites with unique physicochemical and biological advantages would be used to regulate cellular functionality and bone regeneration. Substantial challenges remain. This review focuses on recent progress in mitigating those disputes. The study opens with a brief introduction to bone tissue engineering and GelMA-based composites, followed by their potential applications in bone tissue engineering. The future perspectives and current challenges of GelMA composites are demonstrated. This review would guide the researchers to design and fabricate more efficient multifunctional GelMA-based composites with improved characteristics for their practical applications in bone tissue engineering and biomedical segments.

Development and in vitro assessment of a bi-layered chitosan-nano-hydroxyapatite osteochondral scaffold

An innovative approach was developed to engineer a multi-layered chitosan scaffold for osteochondral defect repair. A combination of freeze drying and porogen-leaching out methods produced a porous, bioresorbable scaffold with a distinct gradient of pore size (mean = 160-275 μm). Incorporation of 70 wt% nano-hydroxyapatite (nHA) provided additional strength to the bone-like layer. The scaffold showed instantaneous mechanical recovery under compressive loading and did not delaminate under tensile loading. The scaffold supported the attachment and proliferation of human mesenchymal stem cells (MSCs), with typical adherent cell morphology found on the bone layer compared to a rounded cell morphology on the chondrogenic layer. Osteogenic and chondrogenic differentiation of MSCs preferentially occurred in selected layers of the scaffold in vitro, driven by the distinct pore gradient and material composition. This scaffold is a suitable candidate for minimally invasive arthroscopic delivery in the clinic with potential to regenerate damaged cartilage and bone.

A Non-thermal Biocompatible Plasma-Modified Chitosan Scaffold Enhances Osteogenic Differentiation in Bone Marrow Stem Cells

Non-thermal biocompatible plasma (NBP) was considered as an efficient tool in tissue engineering to modify the surface of biomaterials. Three-dimensional chitosan scaffolds have been extensively used in different ways because it holds some remarkable properties, including biodegradability and biocompatibility. In this study, we evaluated the osteogenic potential of NBP-treated chitosan scaffolds using two different plasma sources: a dielectric barrier discharge (NBP-DBD) and a soft jet (NBP-J). The surface modification of the scaffold was evaluated using scanning electron microscopy. For osteogenic differentiation of cells, proliferation and differentiation were tested by using bone marrow-derived stem cells (BMSCs). We observed that cell viability using NBP-DBD and NBP-J treated chitosan scaffolds yielded significant improvements in cell viability and differentiation. The results obtained with MTT and live/dead assays showed that NBP-modified scaffold increases cell metabolic by MTT assay and live/dead assay. It also observed that the NBP treatment is more effective at 5 min with DBD and was selected for further investigations. Enhanced osteogenic differentiation was observed using NBP-treated scaffolds, as reflected by increased alkaline phosphatase activity. Our findings showed that NBP is an innovative and beneficial tool for modifying chitosan scaffolds to increase their activity, making them suitable as biocompatible materials and for bone tissue engineering.

Predicting the molecular mechanism of glucosamine in accelerating bone defect repair by stimulating osteogenic proteins

OBJECTIVES

Bone defect is serious condition that is usually caused by traffic accident. Chitosan is a polymer developed as a scaffold to treat bone defect. However, the mechanism by which chitosan can accelerate bone growth in defect area is still unclear. This study aims to identify proteins which are crucial to the osteogenic properties of chitosan monomer using an in silico study.

METHODS

Molecular docking was carried out on chitosan monomer, which are d-glucosamine and glucosamine 6-phosphate units against bone morphogenetic protein 2 (BMP-2), fibronectin, fibroblast growth factor (Fgf), and phosphate transporter (PiT) using AutoDock Vina. Ligand preparation was carried out using Chem3D version 15.0.0.106, while protein preparation was performed using AutoDockTools version 1.5.6.

RESULTS

The results showed that glucosamine 6-phosphate had the best binding affinity with fibronectin and PiT, which was -5.7 kcal mol^-1 on both proteins, while d-glucosamine had the best binding affinity with PiT (-5.2 kcal mol^-1).

CONCLUSIONS

This study suggests that the osteogenic properties of chitosan may be due to the presence of bonds between glucosamine units and fibronectin and/or PiT. However, in vitro studies need to be done to prove this.

Chitosan and Hydroxyapatite Based Biomaterials to Circumvent Periprosthetic Joint Infections

Every year, worldwide, millions of people suffering from joint pain undergo joint replacement. For most patients, joint arthroplasty reduces pain and improve function, though a small fraction will experience implant failure. One of the main reasons includes prosthetic joint infection (PJI), involving the prosthesis and adjacent tissues. Few microorganisms (MO) are required to inoculate the implant, resulting in the formation of a biofilm on its surface. Standard treatment includes not only removal of the infected prosthesis but also the elimination of necrotic bone fragments, local and/or systemic administration of antibiotics, and revision arthroplasty with a new prosthesis, immediately after the infection is cleared. Therefore, an alternative to the conventional therapeutics would be the incorporation of natural antimicrobial compounds into the prosthesis. Chitosan (Ch) is a potential valuable biomaterial presenting properties such as biocompatibility, biodegradability, low immunogenicity, wound healing ability, antimicrobial activity, and anti-inflammatory potential. Regarding its antimicrobial activity, Gram-negative and Gram-positive bacteria, as well as fungi are highly susceptible to chitosan. Calcium phosphate (CaP)-based materials are commonly utilized in orthopedic and dentistry for their excellent biocompatibility and bioactivity, particularly in the establishment of cohesive bone bonding that yields effective and rapid osteointegration. At present, the majority of CaP-based materials are synthetic, which conducts to the depletion of the natural resources of phosphorous in the future due to the extensive use of phosphate. CaP in the form of hydroxyapatite (HAp) may be extracted from natural sources as fish bones or scales, which are by-products of the fish food industry. Thus, this review aims to enlighten the fundamental characteristics of Ch and HAp biomaterials which makes them attractive to PJI prevention and bone regeneration, summarizing relevant studies with these biomaterials to the field.

Hydroxyapatite Based Materials for Bone Tissue Engineering: A Brief and Comprehensive Introduction

Hydroxyapatite (HA) is widely used in bone tissue engineering for its bioactivity and biocompatibility, and a growing number of researchers are exploring ways to improve the physical properties and biological functions of hydroxyapatite. Up to now, HA has been used as inorganic building blocks for tissue engineering or as nanofillers to blend with polymers, furthermore, various methods such as ion doping or surface modification have been also reported to prepare functionalized HA. In this review, we try to give a brief and comprehensive introduction about HA-based materials, including ion-doped HA, HA/polymer composites and surface modified HA and their applications in bone tissue engineering. In addition, the prospective of HA is also discussed. This review may be helpful for researchers to get a general understanding about the development of hydroxyapatite based materials.

Fabrication of ultrahigh-molecular-weight polyethylene porous implant for bone application

Porous implants play a crucial role in allowing ingrowth of host connective tissue and thereby help in keeping the implant in its place. With the aim of mimicking the microstructure of natural extracellular matrix, ultrahigh-molecular-weight polyethylene (UHMWPE) porous samples with a desirable pore size distribution were developed by combining thermally induced phase separation and salt leaching techniques. The porous UHMWPE samples consisted of a nanofibrous UHMWPE matrix with a fibre diameter smaller than 500 nm, highly interconnected, with a controllable pore diameter from nanoscale to 300 µm. Moreover, a porous UHMWPE sample was also developed as a continuous and homogeneous coating onto the UHMWPE dense sample. The dense/porous UHMWPE sample supported human foetal osteoblast 1.19 cell line proliferation and differentiation, indicating the potential of porous UHMWPE with a desirable pore size distribution for bone application. An osseointegration model in the sheep revealed substantial bone formation within the pore layer at 12 weeks via SEM evaluation. Ingrown bone was more closely opposed to the pore wall when compared to the dense UHMWPE control. These results indicate that dense/porous UHMWPE could provide improved osseointegration while maintaining the structural integrity necessary for load-bearing orthopaedic application.

BMP gene delivery for skeletal tissue regeneration

Musculoskeletal disorders are common and can be associated with significant morbidity and reduced quality of life. Current treatments for major bone loss or cartilage defects are insufficient. Bone morphogenetic proteins (BMPs) are key players in the recruitment and regeneration of damaged musculoskeletal tissues, and attempts have been made to introduce the protein to fracture sites with limited success. In the last 20 years we have seen a substantial progress in the development of various BMP gene delivery platforms for several conditions. In this review we cover the progress made using several techniques for BMP gene delivery for bone as well as cartilage regeneration, with focus on recent advances in the field of skeletal tissue engineering. Some methods have shown success in large animal models, and with the global trend of introducing gene therapies into the clinical setting, it seems that the day in which BMP gene therapy will be viable for clinical use is near.

Programmed Sustained Release of Recombinant Human Bone Morphogenetic Protein-2 and Inorganic Ion Composite Hydrogel as Artificial Periosteum

Recombinant human bone morphogenetic protein-2 (rhBMP-2) and bioceramic are the widely used bioactive factors in treatment of bone defects, but these easily cause side effects because of uncontrollable local concentration. In this study, rhBMP-2 was grafted on the surface of mesoporous bioglass nanoparticles (MBGNs) with an amide bond and then photo-cross-linked together with methacrylate gelatin (GelMA); in this way, a GelMA/MBGNs-rhBMP-2 hydrogel membrane was fabricated to release rhBMP-2 in a controllable program during the early bone regeneration period and then release calcium and silicon ions to keep promoting osteogenesis instead of rhBMP-2 in a long term. In this way, rhBMP-2 can keep releasing for 4 weeks and then the ions keep releasing after 4 weeks; this process is matched to early and late osteogenesis procedures. In vitro study demonstrated that the early release of rhBMP-2 can effectively promote local cell osteogenic differentiation in a short period, and then, the inorganic ions can promote cell adhesion not only in the early stage but also keep promoting osteogenic differentiation for a long period. Finally, the GelMA/MBGNs-rhBMP-2 hydrogel shows a superior capacity in long-term osteogenesis and promoting bone tissue regeneration in rat calvarial critical size defect. This GelMA/MBGNs-rhBMP-2 hydrogel demonstrated a promising strategy for the controllable and safer use of bioactive factors such as rhBMP-2 in artificial periosteum to accelerate bone repairing.

Enhanced efficiency in isolation and expansion of hAMSCs via dual enzyme digestion and micro-carrier

A two-stage method of obtaining viable human amniotic stem cells (hAMSCs) in large-scale is described. First, human amniotic stem cells are isolated via dual enzyme (collagenase II and DNAase I) digestion. Next, relying on a culture of the cells from porous chitosan-based microspheres in vitro, high purity hAMSCs are obtained in large-scale. Dual enzymatic (collagenase II and DNase I) digestion provides a primary cell culture and first subculture with a lower contamination rate, higher purity and a larger number of isolated cells. The obtained hAMSCs were seeded onto chitosan microspheres (CM), gelatin-chitosan microspheres (GCM) and collagen-chitosan microspheres (CCM) to produce large numbers of hAMSCs for clinical trials. Growth activity measurement and differentiation essays of hAMSCs were realized. Within 2 weeks of culturing, GCMs achieved over 1.28 ± 0.06 × 107 hAMSCs whereas CCMs and CMs achieved 7.86 ± 0.11 × 106 and 1.98 ± 0.86 × 106 respectively within this time. In conclusion, hAMSCs showed excellent attachment and viability on GCM-chitosan microspheres, matching the hAMSCs' normal culture medium. Therefore, dual enzyme (collagenase II and DNAase I) digestion may be a more useful isolation process and culture of hAMSCs on porous GCM in vitro as an ideal environment for the large-scale expansion of highly functional hAMSCs for eventual use in stem cell-based therapy.

Chitosan oligosaccharide inhibits skull resorption induced by lipopolysaccharides in mice

Background

Low-molecular-weight chitosan oligosaccharide (LMCOS), a chitosan degradation product, is water-soluble and easily absorbable, rendering it a popular biomaterial to study. However, its effect on bone remodelling remains unknown. Therefore, we evaluated the effect of LMCOS on lipopolysaccharide (LPS)-induced bone resorption in mice.

Methods

Six-week-old male C57BL/6 mice (n = five per group) were randomly divided into five groups: PBS, LPS, LPS + 0.005% LMCOS, LPS + 0.05% LMCOS, and LPS + 0.5% LMCOS. Then, the corresponding reagents (300 μL) were injected into the skull of the mice. To induce bone resorption, LPS was administered at 10 mg/kg per injection. The mice were injected three times a week with PBS alone or LPS without or with LMCOS and sacrificed 2 weeks later. The skull was removed for micro-computed tomography, haematoxylin-eosin staining, and tartrate-resistant acid phosphatase staining. The area of bone damage and osteoclast formation were evaluated and recorded.

Results

LMCOS treatment during LPS-induced skull resorption led to a notable reduction in the area of bone destruction; we observed a dose-dependent decrease in the area of bone destruction and number of osteoclasts with increasing LMCOS concentration.

Conclusions

Our findings showed that LMCOS could inhibit skull bone damage induced by LPS in mice, further research to investigate its therapeutic potential for treating osteolytic diseases is required.

Fracture Non-Union: A Review of Clinical Challenges and Future Research Needs

Non-union of bone following fracture is an orthopaedic condition with a high morbidity and clinical burden. Despite its estimated global prevalence of nine million annually, the limit of bone regeneration therapy still results in patients living with pain, a reduced quality of life and associated psychological, social and financial repercussions. This review provides an overview of the current epidemiological and aetiological data, and highlights where the clinical challenges in treating non-union lie. Current treatment strategies are discussed as well as promising future research foci. Development in biotechnologies to treat non-union provides exciting scope for more effective treatment for this debilitating condition.

Promotion of osteogenic differentiation by non-thermal biocompatible plasma treated chitosan scaffold

Non-thermal biocompatible plasma (NBP) has recently emerged as an attractive tool for surface modification of biomaterials in tissue engineering. Three dimensional chitosan scaffolds have been widely used in bone tissue engineering due to biodegradable and biocompatible properties. The present study aimed to evaluate osteogenic potential of NBP treated chitosan scaffold. The surface characteristics of scaffolds were analyzed by scanning electron microscopy (SEM) and X-ray diffraction (XRD), cell proliferation and differentiation was tested with osteoprogenitor cell line MC3T3-E1. The results show that NBP modified scaffold increase cell metabolic by MTT assay and live/dead assay. More importantly, we evidenced enhancement of osteogenic differentiation on NBP treated scaffolds by an increase of alkaline phosphatase (ALP) activity, high degree of extracellular mineralization and up-regulated osteogenic marker genes expression level. The findings in our study highlighted NBP as the innovative method to modified chitosan scaffold and to fine-tuning the scaffold a more suitable and beneficial biomaterial for in vivo bone tissue engineering and clinical bone defects therapies.

Structure and properties of nano-hydroxyapatite/poly(butylene succinate) porous scaffold for bone tissue engineering prepared by using ethanol as porogen

Biodegradable polymers, because their degradation products are small molecules that do not cause immune system rejection, have been increasingly used by researchers to explore the preparation of scaffold with excellent mechanical properties, biocompatibility and biodegradability. In this study, nano-hydroxyapatite and polybutylene succinate were mixed by solution-blending to prepare a porous scaffold that could be used in the biomedical industry. Based on the viewpoint of bionics, porous scaffold with well pore structure and uniform dispersion of nano-hydroxyapatite particles was prepared using ethanol as a porogen. When ethanol was used as a porogen to prepare the porous scaffold, the effects of different mass ratios of nano-hydroxyapatite and polybutylene succinate on the porosity and pore structure of the porous scaffold were investigated under the same amount of ethanol. The mercury intrusion tests showed that the porosity of the 30 nano-hydroxyapatite/polybutylene succinate porous scaffold was 38.987%. The experiment results of in vitro mineralization and cell culture showed that the porous scaffolds have good osteogenic capacity and cell compatibility, including attachment and proliferation. All experiment results indicated that ethanol can be used as a porogen to prepare nano-hydroxyapatite/polybutylene succinate porous scaffold, and it has great potential as a scaffold for bone tissue engineering.

BMP-2-Immobilized Porous Matrix with Leaf-Stacked Structure as a Bioactive GBR Membrane

We developed an asymmetrically porous membrane with a leaf-stacked structure (LSS membrane; top with nanosized pores and bulk/bottom with leaf-stacked structure) via immersion-precipitation using polycarprolactone (PCL)/Pluronic F127 mixture solution (in tetraglycol). The bone morphogenetic protein-2 (BMP-2) is immobilized on the pore surfaces of the LSS membrane by immersing the membrane in the BMP-2 solution. The BMP-2 loaded in the LSS membrane is continuously released for 38 days (without additional modifications of the matrix) to improve osteogenic differentiation of cells and new bone formation (carvarial defect rat model). The leaf-stacked structure is recognized to be a physical stimulus for bone regeneration, and the stimulation effect is comparable to that of continuously released BMP-2. Moreover, we observe the combined effect of BMP-2 and the leaf-stacked structure for bone healing. Thus, we suggest that the BMP-2-immobilized LSS membrane may be a candidate as a bioactive guided bone regeneration (GBR) membrane for clinical applications, due to the use of clinically acceptable biomaterials and fabrication procedures as well as effective osteogenic differentiation and bone regeneration.

3D bioactive composite scaffolds for bone tissue engineering

Bone is the second most commonly transplanted tissue worldwide, with over four million operations using bone grafts or bone substitute materials annually to treat bone defects. However, significant limitations affect current treatment options and clinical demand for bone grafts continues to rise due to conditions such as trauma, cancer, infection and arthritis. Developing bioactive three-dimensional (3D) scaffolds to support bone regeneration has therefore become a key area of focus within bone tissue engineering (BTE). A variety of materials and manufacturing methods including 3D printing have been used to create novel alternatives to traditional bone grafts. However, individual groups of materials including polymers, ceramics and hydrogels have been unable to fully replicate the properties of bone when used alone. Favourable material properties can be combined and bioactivity improved when groups of materials are used together in composite 3D scaffolds. This review will therefore consider the ideal properties of bioactive composite 3D scaffolds and examine recent use of polymers, hydrogels, metals, ceramics and bio-glasses in BTE. Scaffold fabrication methodology, mechanical performance, biocompatibility, bioactivity, and potential clinical translations will be discussed.

Sustained Release of BMP-2 from Porous Particles with Leaf-Stacked Structure for Bone Regeneration

Sustained release of bioactive molecules from delivery systems is a common strategy for ensuring their prolonged bioactivity and for minimizing safety issues. However, residual toxic reagents, the use of harsh organic solvents, and complex fabrication procedures in conventional delivery systems are considered enormous impediments toward clinical use. Herein, we describe bone morphogenetic protein-2 (BMP-2)-immobilized porous polycaprolactone particles with unique leaf-stacked structures (LSS particles) prepared using clinically feasible materials and procedures. The BMP-2 immobilized in these LSS particles is continuously released up to 36 days to provide an appropriate environment for osteogenic differentiation of human periosteum-derived cells and new bone formation. Thus, the leaf-stacked structures of these LSS particles provide a simple but clinically applicable platform for effectively delivering a variety of bioactive molecules, such as growth factors, hormones, cytokines, peptides, etc.

Interleukin-17A promotes osteogenic differentiation by increasing OPG/RANKL ratio in stem cells from human exfoliated deciduous teeth (SHED)

Stem cells derived from human exfoliated deciduous teeth (SHED) represent a promising cell source for bone tissue regeneration. This study evaluated the effects of interleukin-17A (IL-17A) on the osteogenic differentiation of SHED. SHED were cultured in complete alpha minimum essential medium supplemented with osteoinducing reagents and treated with recombinant IL-17A. The cells were quantitatively analysed for proliferative activity by MTS assay, cell markers expression, and apoptotic activity by flow cytometry. For osteogenic differentiation, alkaline phosphatase (ALP) activity was quantified; mineralization assays were carried out using von Kossa and Alizarin red, and expression of osteogenic markers were analysed by real-time polymerase chain reaction and Western blot. The results showed that treatment with IL-17A increased proliferative activity in a dose-dependent manner, but reduced the expression of stem cell markers (c-Myc and Nanog) as the days progressed. IL-17A induced osteogenic differentiation in SHED as evidenced by high ALP activity, increased matrix mineralization, and upregulation of the mRNA expression of the osteogenic markers ALP, alpha 1 type 1 collagen (Col1A1), runt-related transcription factor 2 (RUNX2), osteopontin (OPN), osteocalcin (OCN), and osteoprotegerin (OPG) but downregulation of receptor activator of nuclear factor κB ligand (RANKL) as well as altering the OPG/RANKL ratio. Findings from our study indicate that IL-17A enhances proliferation and osteogenic differentiation of SHED by regulating OPG/RANKL mechanism thus suggests therapeutic potential of IL-17A in bone regeneration.

Evaluation of Peripheral Blood and Cord Blood Platelet Lysates in Isolation and Expansion of Multipotent Mesenchymal Stromal Cells

Abstract: Background: Multipotent Mesenchymal Stromal Cells (MSCs) are used in tissue engineering and regenerative medicine. The in vitro isolation and expansion of MSCs involve the use of foetal bovine serum (FBS). However, many concerns have been raised regarding the safety of this product. In this study, alternative additives derived either from peripheral or cord blood were tested as an FBS replacement. Methods: Platelet lysates (PL) from peripheral and cord blood were used for the expansion of MSCs. The levels of growth factors in peripheral blood (PB) and cord blood (CB) PLs were determined using the Multiple Reaction Monitoring (MRM). Finally, the cell doubling time (CDT), tri-lineage differentiation and phenotypic characterization of the MSCs expanded with FBS and PLs were determined. Results: MSCs treated with culture media containing FBS and PB-PL, were successfully isolated and expanded, whereas MSCs treated with CB-PL could not be maintained in culture. Furthermore, the MRM analysis yielded differences in growth factor levels between PB-PL and CB-PL. In addition, the MSCs were successfully expanded with FBS and PB-PL and exhibited tri-lineage differentiation and stable phenotypic characteristics. Conclusion: PB-PL could be used as an alternative additive for the production of MSCs culture medium applied to xenogeneic-free expansion and maintenance of MSCs in large scale clinical studies.

Structural design of polyurethane/poly(butylene succinate)/polycaprolactone compounds via a multilayer-assembled strategy: achieving tunable triple-shape memory performances

Novel strategy for structural design of multicomponent systems via layer-multiplying co-extrusion: achieving tunable triple-shape memory performances of polyurethane/poly(butylene succinate)/polycaprolactone compounds.

Strategy for Fabricating Multiple-Shape-Memory Polymeric Materials via the Multilayer Assembly of Co-Continuous Blends

Shape-memory polymeric materials containing alternating layers of thermoplastic polyurethane (TPU) and co-continuous poly(butylene succinate) (PBS)/polycaprolactone (PCL) blends (denoted SLBs) were fabricated through layer-multiplying coextrusion. Because there were two well-separated phase transitions caused by the melt of PCL and PBS, both the dual- and triple-shape-memory effects were discussed. Compared with the blending specimen with the same components, the TPU/SLB multilayer system with a multicontinuous structure and a plenty of layer interfaces was demonstrated to have higher shape fixity and recovery ability. When the number of layers reached 128, both the shape fixity and recovery ratios were beyond 95 and 85% in dual- and triple-shape-memory processes, respectively, which were difficult to be achieved through conventional melt-processing methods. On the basis of the classic viscoelastic theory, the parallel-assembled TPU and SLB layers capable of maintaining the same strain along the deforming direction were regarded to possess the maximum ability to fix temporary shapes and trigger them to recover back to original ones through the interfacial shearing effect. Accordingly, the present approach provided an efficient strategy for fabricating outstanding multiple-shape-memory polymers, which may exhibit a promising application in the fields of biomedical devices, sensors and actuators, and so forth.

Chitosan-based nanocomposites for the repair of bone defects

Chitosan scaffolds of different deacetylation degrees, average molecular weights and concentrations reinforced with silica nanoparticles were prepared for bone tissue regeneration. The resulting nanocomposites showed similar pore sizes (<300 μm) regardless the deacetylation degree and concentration used in their formulation. Their mechanical compression resistance was increased by a 30% with the addition of silica nanoparticles as nanofillers. The biocompatibility of the three-dimensional chitosan scaffolds was confirmed by the Alamar Blue assay in human primary osteoblasts as well as the formation of cell spheroids indicative of their great potential for bone regeneration. In vivo implantation of the scaffolds in a mice calvaria defect model provided substantial evidences of the suitability of these nanocomposites for bone tissue engineering showing a mature and dense collagenous tissue with small foci of mineralization, vascularized areas and the infiltration of osteoblasts and osteoclasts. Nevertheless, mature bone tissue formation was not observed after eight weeks of implantation.

A Combinational Effect of "Bulk" and "Surface" Shape-Memory Transitions on the Regulation of Cell Alignment

A novel shape-memory cell culture platform has been designed that is capable of simultaneously tuning surface topography and dimensionality to manipulate cell alignment. By crosslinking poly(ε-caprolactone) (PCL) macromonomers of precisely designed nanoarchitectures, a shape-memory PCL with switching temperature near body temperature is successfully prepared. The temporary strain-fixed PCLs are prepared by processing through heating, stretching, and cooling about the switching temperature. Temporary nanowrinkles are also formed spontaneously during the strain-fixing process with magnitudes that are dependent on the applied strain. The surface features completely transform from wrinkled to smooth upon shape-memory activation over a narrow temperature range. Shape-memory activation also triggers dimensional deformation in an initial fixed strain-dependent manner. A dynamic cell-orienting study demonstrates that surface topographical changes play a dominant role in cell alignment for samples with lower fixed strain, while dimensional changes play a dominant role in cell alignment for samples with higher fixed strain. The proposed shape-memory cell culture platform will become a powerful tool to investigate the effects of spatiotemporally presented mechanostructural stimuli on cell fate.

Keratin/chitosan UV-crosslinked composites promote the osteogenic differentiation of human adipose derived stem cells

A photocrosslinkable natural polymer, keratin/chitosan composite, promotes the aggregation and osteogenic differentiation of human adipose derived stem cells.

DHEA promotes osteoblast differentiation by regulating the expression of osteoblast-related genes and Foxp3(+) regulatory T cells

Several studies have reported that dehydroepiandrosterone (DHEA) promotes osteoblast proliferation and inhibits osteoblast apoptosis and that DHEA inhibits osteoclast maturation. However, whether DHEA regulates osteoblast differentiation remains unclear. The present study first examined the effect of DHEA on bone morphology in vivo. DHEA was found to increase bone volume (BV), bone mineral density (BMD), and the number of trabeculae in bone (Th.N) and it was found to decrease trabecular spacing in bone (Th.sp) in ovariectomized (OVX) mice. Next, the effect of DHEA on osteoblast differentiation was examined in vitro and osteoblastogenesis-related marker genes, such as Runx2, Osterix, Collagen1, and Osteocalcin, were also detected. DHEA increased osteoblast production in mesenchymal stem cells (MSCs) cultured in osteoblastogenic medium, and DHEA increased the expression of Runx2 and osterix, thereby increasing the expression of osteocalcin and collagen1. Immune cells and bone interact, so changes in immune cells were detected in vivo. DHEA increased the number of Foxp3(+) regulatory T cells (Tregs) in the spleen but it did not affect CTLA-4 or IL-10. When MSCs were treated with DHEA in the presence of Tregs, alkaline phosphatase (ALP) activity increased. Osteoblasts and adipocytes are both generated by MSCs. If osteoblast differentiation increases, adipocyte differentiation will decrease, and the reverse also holds true. DHEA was found to increase the number of adipocytes in osteoblastogenic medium but it had no effect on the number of adipocytes and expression of PPARγ mRNA in adipogenic medium. This finding suggests that osteoblasts may be involved in adipocyte production. In conclusion, the current results suggest that DHEA can improve postmenopausal osteoporosis (PMO) by up-regulating osteoblast differentiation via the up-regulation of the expression of osteoblastogenesis-related genes and via an increase in Foxp3(+) Tregs.

Synergistic intrafibrillar/extrafibrillar mineralization of collagen scaffolds based on a biomimetic strategy to promote the regeneration of bone defects

The mineralization of collagen scaffolds can improve their mechanical properties and biocompatibility, thereby providing an appropriate microenvironment for bone regeneration. The primary purpose of the present study is to fabricate a synergistically intra- and extrafibrillar mineralized collagen scaffold, which has many advantages in terms of biocompatibility, biomechanical properties, and further osteogenic potential. In this study, mineralized collagen scaffolds were fabricated using a traditional mineralization method (ie, immersed in simulated body fluid) as a control group and using a biomimetic method based on the polymer-induced liquid precursor process as an experimental group. In the polymer-induced liquid precursor process, a negatively charged polymer, carboxymethyl chitosan (CMC), was used to stabilize amorphous calcium phosphate (ACP) to form nanocomplexes of CMC/ACP. Collagen scaffolds mineralized based on the polymer-induced liquid precursor process were in gel form such that nanocomplexes of CMC/ACP can easily be drawn into the interstices of the collagen fibrils. Scanning electron microscopy and transmission electron microscopy were used to examine the porous micromorphology and synergistic mineralization pattern of the collagen scaffolds. Compared with simulated body fluid, nanocomplexes of CMC/ACP significantly increased the modulus of the collagen scaffolds. The results of in vitro experiments showed that the cell count and differentiated degrees in the experimental group were higher than those in the control group. Histological staining and micro-computed tomography showed that the amount of new bone regenerated in the experimental group was larger than that in the control group. The biomimetic mineralization will assist us in fabricating a novel collagen scaffold for clinical applications.

Development of Porous Beads to Provide Regulated BMP-2 Stimulation for Varying Durations: In Vitro and In Vivo Studies for Bone Regeneration

It is commonly accepted that the sustained release of bone morphogenetic protein-2 (BMP-2) can enhance bone regeneration and minimize its safety issues. However, little is known regarding the appropriate duration of BMP-2 stimulation for sufficient osteogenic differentiation and new bone formation because of the short half-life of BMP-2 in the physiological environment and the lack of a well-defined delivery matrix that can regulate the release period of BMP-2. In this study, we prepared porous poly(lactic-co-glycolic acid) (PLGA) beads with different surface pore sizes that can regulate the release period of BMP-2 (i.e., 7, 17, and 30 days) while providing the BMP-2 concentration required for bone regeneration. Our findings in both in vitro cell culture and in vivo animal studies using these BMP-2-loaded beads demonstrate that release of BMP-2 within 7 days affects only the initial differentiation of human periosteum-derived cells (hPDCs) and does not significantly enhance their subsequent differentiation into mature functional cells. However, extending the duration of BMP-2 stimulation over 17 days can provide a suitable environment for osteogenic differentiation of hPDCs and new bone formation.

Biomedical Applications of Biodegradable Polyesters

The focus in the field of biomedical engineering has shifted in recent years to biodegradable polymers and, in particular, polyesters. Dozens of polyester-based medical devices are commercially available, and every year more are introduced to the market. The mechanical performance and wide range of biodegradation properties of this class of polymers allow for high degrees of selectivity for targeted clinical applications. Recent research endeavors to expand the application of polymers have been driven by a need to target the general hydrophobic nature of polyesters and their limited cell motif sites. This review provides a comprehensive investigation into advanced strategies to modify polyesters and their clinical potential for future biomedical applications.

Multi-scale cellulose based new bio-aerogel composites with thermal super-insulating and tunable mechanical properties

Bio-composite aerogels based on bleached cellulose fibers (BCF) and cellulose nanoparticles having various morphological and physico-chemical characteristics are prepared by a freeze-drying technique and characterized. The various composite aerogels obtained were compared to a BCF aerogel used as the reference. Severe changes in the material morphology were observed by SEM and AFM due to a variation of the cellulose nanoparticle properties such as the aspect ratio, the crystalline index and the surface charge density. BCF fibers form a 3D network and they are surrounded by the cellulose nanoparticle thin films inducing a significant reduction of the size of the pores in comparison with a neat BCF based aerogel. BET analyses confirm the appearance of a new organization structure with pores of nanometric sizes. As a consequence, a decrease of the thermal conductivities is observed from 28mWm(-1)K(-1) (BCF aerogel) to 23mWm(-1)K(-1) (bio-composite aerogel), which is below the air conductivity (25mWm(-1)K(-1)). This improvement of the insulation properties for composite materials is more pronounced for aerogels based on cellulose nanoparticles having a low crystalline index and high surface charge (NFC-2h). The significant improvement of their insulation properties allows the bio-composite aerogels to enter the super-insulating materials family. The characteristics of cellulose nanoparticles also influence the mechanical properties of the bio-composite aerogels. A significant improvement of the mechanical properties under compression is obtained by self-organization, yielding a multi-scale architecture of the cellulose nanoparticles in the bio-composite aerogels. In this case, the mechanical property is more dependent on the morphology of the composite aerogel rather than the intrinsic characteristics of the cellulose nanoparticles.

Bone Scaffold Based on Biopolymer/Carbonate Apatite by Freeze Drying Method: Synthesis, Characterization, and In Vitro Cytotoxicity

The global need of biomaterial products especially in bone clinical application increases every year. The gold methods like autograft and allograft have some limitations in the application such as the availability of donor sites, antigenicity issues, the high cost, etc. To solve the problems, many researches and activities in the field of biomaterial have been conducted continuously in the past decades to develop the proper synthetic materials for bone substitutes which have properties similar to bone tissue. In this research, the synthesis of biocomposite for bone scaffold application prepared by freeze drying method has been done successfully. The materials used are biopolymer (alginate and chitosan) and bioceramics (carbonate apatite) with certain mixing variations. SEM result showed that the pores obtained by freeze drying method can mimic the pores of actual bone thus they will be able to resemble cells microenvironment, enhance interface interaction, and support cell proliferation. The existence of carbonate apatite on the scaffold’s surface can be observed with particle size of 0.05 – 1 μm and has been dispersed evenly. These results are in good agreement with FT-IR analysis that indicates the presence of PO43– functional group on the scaffold at wave numbers 569 and 1041.56 cm–1 and CO32– functional group at wave number 1411.89 cm–1. The in vitro biological evaluation of HeLa cells which exposed to extract solution of scaffold (in some variations of concentration) indicated that the scaffold obtained was not cytotoxic to the HeLa cells.

Induction of Angiogenesis by Matrigel Coating of VEGF-Loaded PEG/PCL-Based Hydrogel Scaffolds for hBMSC Transplantation

hBMSCs are multipotent cells that are useful for tissue regeneration to treat degenerative diseases and others for their differentiation ability into chondrocytes, osteoblasts, adipocytes, hepatocytes and neuronal cells. In this study, biodegradable elastic hydrogels consisting of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(ε-caprolactone) (PCL) scaffolds were evaluated for tissue engineering because of its biocompatibility and the ability to control the release of bioactive peptides. The primary cultured cells from human bone marrow are confirmed as hBMSC by immunohistochemical analysis. Mesenchymal stem cell markers (collagen type I, fibronectin, CD54, integrin1β, and Hu protein) were shown to be positive, while hematopoietic stem cell markers (CD14 and CD45) were shown to be negative. Three different hydrogel scaffolds with different block compositions (PEG:PCL=6:14 and 14:6 by weight) were fabricated using the salt leaching method. The hBMSCs were expanded, seeded on the scaffolds, and cultured up to 8 days under static conditions in Iscove's Modified Dulbecco's Media (IMDM). The growth of MSCs cultured on the hydrogel with PEG/PCL= 6/14 was faster than that of the others. In addition, the morphology of MSCs seemed to be normal and no cytotoxicity was found. The coating of the vascular endothelial growth factor (VEGF) containing scaffold with Matrigel slowed down the release of VEGF in vitro and promoted the angiogenesis when transplanted into BALB/c nude mice. These results suggest that hBMSCs can be supported by a biode gradable hydrogel scaffold for effective cell growth, and enhance the angiogenesis by Matrigel coating.

The notch signaling regulates CD105 expression, osteogenic differentiation and immunomodulation of human umbilical cord mesenchymal stem cells

Mesenchymal stem cells (MSCs) are a group of multipotent cells with key properties of multi-lineage differentiation, expressing a set of relatively specific surface markers and unique immunomodulatory functions. IDO1, a catabolic enzyme of tryptophan, represents a critical molecule mediating immunomodulatory functions of MSCs. However, the signaling pathways involved in regulating these key properties still remain elusive. To investigate the involvement of Notch signaling as well as other potential signaling pathway(s) in regulating these critical properties of MSCs, we treated human umbilical cord-derived mesenchymal stem cells (hUC-MSCs) with γ-secreatase inhibitor I (GSI-I), which inhibits both Notch signaling and ubiquitin-proteasome activities. It was shown that the GSI-I treatment resulted in apoptosis, reduced expression of surface markers CD73, CD90 and CD105, reduced osteogenic differentiation, and reduction of the hUC-MSCs-mediated suppression of Th1 lymphocyte proliferation and the IFN-γ-induced IDO1 expression. Through distinguishing the effects of GSI-I between Notch inhibition and proteasome inhibition, it was further observed that, whereas both Notch inhibition and proteasome inhibition were attributable to the reduced CD105 expression and osteogenic differentiation, but not to the induced apoptosis. However, Notch inhibition, but not proteasome inhibition, only contributed to the significant effect of GSI-I on Th1 proliferation probably through reducing IDO1 promoter activity. In conclusion, the Notch signaling may represent a very important cell signaling capable of regulating multiple critical properties, especially the immunomodulatory functions of MSCs.

PCL/alginate composite scaffolds for hard tissue engineering: fabrication, characterization, and cellular activities

Alginates have been used widely in biomedical applications because of good biocompatibility, low cost, and rapid gelation in the presence of calcium ions. However, poor mechanical properties and fabrication-ability for three-dimensional shapes have been obstacles in hard-tissue engineering applications. To overcome these shortcomings of alginates, we suggest a new composite system, consisting of a synthetic polymer, poly(ε-caprolactone), and various weight fractions (10-40 wt %) of alginate. The fabricated composite scaffolds displayed a multilayered 3D structure, consisting of microsized composite struts, and they provided a 100% offset for each layer. To show the feasibility of the scaffold for hard tissue regeneration, the composite scaffolds fabricated were assessed not only for physical properties, including surface roughness, tensile strength, and water absorption and wetting, but also in vitro osteoblastic cellular responses (cell-seeding efficiency, cell viability, fluorescence analyses, alkaline phosphatase (ALP) activity, and mineralization) by culturing with preosteoblasts (MC3T3-E1). Due to the alginate components in the composites, the scaffolds showed significantly enhanced wetting behavior, water-absorption (∼12-fold), and meaningful biological activities (∼2.1-fold for cell-seeding efficiency, ∼2.5-fold for cell-viability at 7 days, ∼3.4-fold for calcium deposition), compared with a pure PCL scaffold.

Response of human mesenchymal stem cells to intrafibrillar nanohydroxyapatite content and extrafibrillar nanohydroxyapatite in biomimetic chitosan/silk fibroin/nanohydroxyapatite nanofibrous membrane scaffolds

Incorporation of nanohydroxyapatite (nHAP) within a chitosan (CS)/silk fibroin (SF) nanofibrous membrane scaffold (NMS) may provide a favorable microenvironment that more closely mimics the natural bone tissue physiology and facilitates enhanced osteogensis of the implanted cell population. In this study, we prepared pristine CS/SF NMS, composite CS/SF/nHAP NMS containing intrafibrillar nHAP by in situ blending of 10% or 30% nHAP before the electrospinning step, and composite CS/SF/nHAP NMS containing extrafibrillar nHAP by depositing 30% nHAP through alternative soaking surface mineralization. We investigated the effect of the incorporation of HAP nanoparticles on the physicochemical properties of pristine and composite NMS. We confirmed the presence of ~30 nm nHAP in the composite nanofibrous membranes by thermogravimetry analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM), either embedded in or exposed on the nanofiber. Nonetheless, the alternative soaking surface mineralization method drastically influenced the mechanical properties of the NMS with 88% and 94% drop in Young’s modulus and ultimate maximum stress. Using in vitro cell culture experiments, we investigated the effects of nHAP content and location on proliferation and osteogenic differentiation of human bone marrow mesenchymal stem cells (hMSCs). The proliferation of hMSCs showed no significant difference among pristine and composite NMS. However, the extent of osteogenic differentiation of hMSCs was found to be positively correlated with the content of nHAP in the NMS, while its location within the nanofiber played a less significant role. In vivo experiments were carried out with hMSCs seeded in CS/SF/30%nHAP NMS prepared by in situ blending and subcutaneous implantation in nude mice. Micro-computed tomography images as well as histological and immunohistochemical analysis of the retrieved hMSCs/NMS construct 1 and 2 months postimplantation indicated that NMS had the potential for bone regeneration and can be suggested as a promising scaffold for bone tissue engineering.

Fabrication of polymeric biomaterials: a strategy for tissue engineering and medical devices

Fabrication of biomaterials scaffolds using various methods and techniques is discussed, utilising biocompatible, biodegradable and stimuli-responsive polymers and their composites. This review covers the lithography and printing techniques, self-organisation and self-assembly methods for 3D structural scaffolds generation, and smart hydrogels, for tissue regeneration and medical devices.

Application of Nanoscaffolds in Mesenchymal Stem Cell-Based Therapy

Regenerative medicine is an alternative solution for organ transplantation. Stem cells and nanoscaffolds are two essential components in regenerative medicine. Mesenchymal stem cells (MSCs) are considered as primary adult stem cells with high proliferation capacity, wide differentiation potential, and immunosuppression properties which make them unique for regenerative medicine and cell therapy. Scaffolds are engineered nanofibers that provide suitable microenvironment for cell signalling which has a great influence on cell proliferation, differentiation, and biology. Recently, application of scaffolds and MSCs is being utilized in obtaining more homogenous population of MSCs with higher cell proliferation rate and greater differentiation potential, which are crucial factors in regenerative medicine. In this review, the definition, biology, source, characterization, and isolation of MSCs and current report of application of nanofibers in regenerative medicine in different lesions are discussed.