Construction and characterization of ack deleted mutant of Clostridium tyrobutyricum for enhanced butyric acid and hydrogen production

Metabolic engineering of Caldicellulosiruptor bescii for hydrogen production

Hydrogen is an alternative fuel for transportation vehicles because it is clean, sustainable, and highly flammable. However, the production of hydrogen from lignocellulosic biomass by microorganisms presents challenges. This microbial process involves multiple complex steps, including thermal, chemical, and mechanical treatment of biomass to remove hemicellulose and lignin, as well as enzymatic hydrolysis to solubilize the plant cell walls. These steps not only incur costs but also result in the production of toxic hydrolysates, which inhibit microbial growth. A hyper-thermophilic bacterium of Caldicellulosiruptor bescii can produce hydrogen by decomposing and fermenting plant biomass without the need for conventional pretreatment. It is considered as a consolidated bioprocessing (CBP) microorganism. This review summarizes the basic scientific knowledge and hydrogen-producing capacity of C. bescii. Its genetic system and metabolic engineering strategies to improve hydrogen production are also discussed. KEY POINTS: • Hydrogen is an alternative and eco-friendly fuel. • Caldicellulosiruptor bescii produces hydrogen with a high yield in nature. • Metabolic engineering can make C. bescii to improve hydrogen production.

Hydrogen production pathways in Clostridia and their improvement by metabolic engineering

Biological production of hydrogen has a tremendous potential as an environmentally sustainable technology to generate a clean fuel. Among the different available methods to produce biohydrogen, dark fermentation features the highest productivity and can be used as a means to dispose of organic waste biomass. Within this approach, Clostridia have the highest theoretical H2 production yield. Nonetheless, most strains show actual yields far lower than the theoretical maximum: improving their efficiency becomes necessary for achieving cost-effective fermentation processes. This review aims at providing a survey of the metabolic network involved in H2 generation in Clostridia and strategies used to improve it through metabolic engineering. Together with current achievements, a number of future perspectives to implement these results will be illustrated.

Metabolic Engineering of Microorganisms to Produce Pyruvate and Derived Compounds

Pyruvate is a hub of various endogenous metabolic pathways, including glycolysis, TCA cycle, amino acid, and fatty acid biosynthesis. It has also been used as a precursor for pyruvate-derived compounds such as acetoin, 2,3-butanediol (2,3-BD), butanol, butyrate, and L-alanine biosynthesis. Pyruvate and derivatives are widely utilized in food, pharmaceuticals, pesticides, feed additives, and bioenergy industries. However, compounds such as pyruvate, acetoin, and butanol are often chemically synthesized from fossil feedstocks, resulting in declining fossil fuels and increasing environmental pollution. Metabolic engineering is a powerful tool for producing eco-friendly chemicals from renewable biomass resources through microbial fermentation. Here, we review and systematically summarize recent advances in the biosynthesis pathways, regulatory mechanisms, and metabolic engineering strategies for pyruvate and derivatives. Furthermore, the establishment of sustainable industrial synthesis platforms based on alternative substrates and new tools to produce these compounds is elaborated. Finally, we discuss the potential difficulties in the current metabolic engineering of pyruvate and derivatives and promising strategies for constructing efficient producers.

Wastewater-derived biohydrogen: Critical analysis of related enzymatic processes at the research and large scales

Organic-rich wastewater is a feasible feedstock for biohydrogen production. Numerous review on the performance of microorganisms and the diversity of their communities during a biohydrogen process were published. However, there is still no in-depth overview of enzymes for biohydrogen production from wastewater and their scale-up applications. This review aims at providing an insightful exploration of critical discussion in terms of: (i) the roles and applications of enzymes in wastewater-based biohydrogen fermentation; (ii) systematical introduction to the enzymatic processes of photo fermentation and dark fermentation; (iii) parameters that affect enzymatic performances and measures for enzyme activity/ability enhancement; (iv) biohydrogen production bioreactors; as well as (v) enzymatic biohydrogen production systems and their larger scales application. Furthermore, to assess the best applications of enzymes in biohydrogen production from wastewater, existing problems and feasible future studies on the development of low-cost enzyme production methods and immobilized enzymes, the construction of multiple enzyme cooperation systems, the study of biohydrogen production mechanisms, more effective bioreactor exploration, larger scales enzymatic biohydrogen production, and the enhancement of enzyme activity or ability are also addressed.

Model-based driving mechanism analysis for butyric acid production in Clostridium tyrobutyricum

Background

Butyric acid, an essential C4 platform chemical, is widely used in food, pharmaceutical, and animal feed industries. Clostridium tyrobutyricum is the most promising microorganism for industrial bio-butyrate production. However, the metabolic driving mechanism for butyrate synthesis was still not profoundly studied.

Results

This study reports a first-generation genome-scale model (GEM) for C. tyrobutyricum, which provides a comprehensive and systematic analysis for the butyrate synthesis driving mechanisms. Based on the analysis in silico, an energy conversion system, which couples the proton efflux with butyryl-CoA transformation by two redox loops of ferredoxin, could be the main driving force for butyrate synthesis. For verifying the driving mechanism, a hydrogenase (HydA) expression was perturbed by inducible regulation and knockout. The results showed that HydA deficiency significantly improved the intracellular NADH/NAD+ rate, decreased acetate accumulation (63.6% in serum bottle and 58.1% in bioreactor), and improved the yield of butyrate (26.3% in serum bottle and 34.5% in bioreactor). It was in line with the expectation based on the energy conversion coupling driving mechanism.

Conclusions

This work show that the first-generation GEM and coupling metabolic analysis effectively promoted in-depth understanding of the metabolic driving mechanism in C. tyrobutyricum and provided a new insight for tuning metabolic flux direction in Clostridium chassis cells.

Processing of Biomass Prior to Hydrogen Fermentation and Post-Fermentative Broth Management

Using bioconversion and simultaneous value-added product generation requires purification of the gaseous and the liquid streams before, during, and after the bioconversion process. The effect of diversified process parameters on the efficiency of biohydrogen generation via biological processes is a broad object of research. Biomass-based raw materials are often applied in investigations regarding biohydrogen generation using dark fermentation and photo fermentation microorganisms. The literature lacks information regarding model mixtures of lignocellulose and starch-based biomass, while the research is carried out based on a single type of raw material. The utilization of lignocellulosic and starch biomasses as the substrates for bioconversion processes requires the decomposition of lignocellulosic polymers into hexoses and pentoses. Among the components of lignocelluloses, mainly lignin is responsible for biomass recalcitrance. The natural carbohydrate-lignin shields must be disrupted to enable lignin removal before biomass hydrolysis and fermentation. The matrix of chemical compounds resulting from this kind of pretreatment may significantly affect the efficiency of biotransformation processes. Therefore, the actual state of knowledge on the factors affecting the culture of dark fermentation and photo fermentation microorganisms and their adaptation to fermentation of hydrolysates obtained from biomass requires to be monitored and a state of the art regarding this topic shall become a contribution to the field of bioconversion processes and the management of liquid streams after fermentation. The future research direction should be recognized as striving to simplification of the procedure, applying the assumptions of the circular economy and the responsible generation of liquid and gas streams that can be used and purified without large energy expenditure. The optimization of pre-treatment steps is crucial for the latter stages of the procedure.

Debottlenecking the biological hydrogen production pathway of dark fermentation: insight into the impact of strain improvement

Confronted with the exhaustion of the earth’s fossil fuel reservoirs, bio-based process to produce renewable energy is receiving significant interest. Hydrogen is considered as an attractive energy carrier that can replace fossil fuels in the future mainly due to its high energy content, recyclability and environment-friendly nature. Biological hydrogen production from renewable biomass or waste materials by dark fermentation is a promising alternative to conventional routes since it is energy-saving and reduces environmental pollution. However, the current yield and evolution rate of fermentative hydrogen production are still low. Strain improvement of the microorganisms employed for hydrogen production is required to make the process competitive with traditional production methods. The present review summarizes recent progresses on the screening for highly efficient hydrogen-producing strains using various strategies. As the metabolic pathways for fermentative hydrogen production have been largely resolved, it is now possible to engineer the hydrogen-producing strains by rational design. The hydrogen yields and production rates by different genetically modified microorganisms are discussed. The key limitations and challenges faced in present studies are also proposed. We hope that this review can provide useful information for scientists in the field of fermentative hydrogen production.

Hydrogen can be generated by microorganisms.

Dark fermentation is efficient for biological hydrogen production.

Strain improvement is critical to enhancing hydrogen-producing ability.

A comprehensive review on current status and future perspectives of microbial volatile fatty acids production as platform chemicals

Volatile fatty acids (VFA), the secondary metabolite of microbial fermentation, are used in a wide range of industries for production of commercially valuable chemicals. In this review, the fermentative production of VFAs by both pure as well mixed microbial cultures is highlighted along with the strategies for enhancing the VFA production through innovations in existing approaches. Role of conventionally applied tools for the optimization of operational parameters such as pH, temperature, retention time, organic loading rate, and headspace pressure has been discussed. Furthermore, a comparative assessment of above strategies on VFA production has been done with alternate developments such as co-fermentation, substrate pre-treatment, and in situ removal from fermented broth. The review also highlights the applications of different bioreactor geometries in the optimum production of VFAs and how metagenomic tools could provide a detailed insight into the microbial communities and their functional attributes that could be subjected to metabolic engineering for the efficient production of VFAs.

Increased Butyrate Production in Clostridium saccharoperbutylacetonicum from Lignocellulose-Derived Sugars

Butyrate is produced by chemical synthesis based on crude oil, produced by microbial fermentation, or extracted from animal fats (M. Dwidar, J.-Y. Park, R. J. Mitchell, and B.-I. Sang, The Scientific World Journal, 2012:471417, 2012, https://doi.org/10.1100/2012/471417). Butyrate production by anaerobic bacteria is highly favorable since waste or sustainable resources can be used as the substrates. For this purpose, the native hyper-butanol producer Clostridium saccharoperbutylacetonicum N1-4(HMT) was used as a chassis strain due to its broad substrate spectrum. BLASTp analysis of the predicted proteome of C. saccharoperbutylacetonicum N1-4(HMT) resulted in the identification of gene products potentially involved in acetone-butanol-ethanol (ABE) fermentation. Their participation in ABE fermentation was either confirmed or disproven by the parallel production of acids or solvents and the respective transcript levels obtained by transcriptome analysis of this strain. The genes encoding phosphotransacetylase (pta) and butyraldehyde dehydrogenase (bld) were deleted to reduce acetate and alcohol formation. The genes located in the butyryl-CoA synthesis (bcs) operon encoding crotonase, butyryl-CoA dehydrogenase with electron-transferring protein subunits α and β, and 3-hydroxybutyryl-CoA dehydrogenase were overexpressed to channel the flux further towards butyrate formation. Thereby, the native hyper-butanol producer C. saccharoperbutylacetonicum N1-4(HMT) was converted into the hyper-butyrate producer C. saccharoperbutylacetonicum ΔbldΔpta [pMTL83151_BCS_P_bgaL]. The transcription pattern following deletion and overexpression was characterized by a second transcriptomic study, revealing partial compensation for the deletion. Furthermore, this strain was characterized in pH-controlled fermentations with either glucose or Excello, a substrate yielded from spruce biomass. Butyrate was the main product, with maximum butyrate concentrations of 11.7 g·L^-1 and 14.3 g·L^-1, respectively. Minimal amounts of by-products were detected. IMPORTANCE Platform chemicals such as butyrate are usually produced chemically from crude oil, resulting in the carry-over of harmful compounds. The selective production of butyrate using sustainable resources or waste without harmful by-products can be achieved by bacteria such as clostridia. The hyper-butanol producer Clostridium saccharoperbutylacetonicum N1-4(HMT) was converted into a hyper-butyrate producer. Butyrate production with very small amounts of by-products was established with glucose and the sustainable lignocellulosic sugar substrate Excello extracted from spruce biomass by the biorefinery Borregaard (Sarpsborg, Norway).

Renewable hydrogen production by dark-fermentation: Current status, challenges and perspectives

Global urbanization has resulted in amplified energy and material consumption with simultaneous waste generation. Current energy demand is mostly fulfilled by finite fossil reserves, which has critical impact on the environment and thus, there is a need for carbon-neutral energy. In this view, biohydrogen (bio-H₂) is considered suitable due to its potential as a green and dependable carbon-neutral energy source in the emerging 'Hydrogen Economy'. Bio-H₂ production by dark fermentation of biowaste/biomass/wastewater is gaining significant attention. However, bio-H₂production still holds critical challenges towards scale-up with reference to process limitations and economic viabilities. This review illustrates the status of dark-fermentation process in the context of process sustainability and achieving commercial success. The review also provides an insight on various process integrations for maximum resource recovery including closed loop biorefinery approach towards the accomplishment of carbon neutral H₂ production.

Microbial engineering for the production of C2-C6 organic acids

Covering: up to the end of 2020Organic acids, as building block compounds, have been widely used in food, pharmaceutical, plastic, and chemical industries. Until now, chemical synthesis is still the primary method for industrial-scale organic acid production. However, this process encounters some inevitable challenges, such as depletable petroleum resources, harsh reaction conditions and complex downstream processes. To solve these problems, microbial cell factories provide a promising approach for achieving the sustainable production of organic acids. However, some key metabolites in central carbon metabolism are strictly regulated by the network of cellular metabolism, resulting in the low productivity of organic acids. Thus, multiple metabolic engineering strategies have been developed to reprogram microbial cell factories to produce organic acids, including monocarboxylic acids, hydroxy carboxylic acids, amino carboxylic acids, dicarboxylic acids and monomeric units for polymers. These strategies mainly center on improving the catalytic efficiency of the enzymes to increase the conversion rate, balancing the multi-gene biosynthetic pathways to reduce the byproduct formation, strengthening the metabolic flux to promote the product biosynthesis, optimizing the metabolic network to adapt the environmental conditions and enhancing substrate utilization to broaden the substrate spectrum. Here, we describe the recent advances in producing C₂-C₆ organic acids by metabolic engineering strategies. In addition, we provide new insights as to when, what and how these strategies should be taken. Future challenges are also discussed in further advancing microbial engineering and establishing efficient biorefineries.

Effects of benzyl viologen on increasing NADH availability, acetate assimilation, and butyric acid production by Clostridium tyrobutyricum

Clostridium tyrobutyricum produces butyric and acetic acids from glucose. The butyric acid yield and selectivity in the fermentation depend on NADH available for acetate reassimilation to butyric acid. In this study, benzyl viologen (BV), an artificial electron carrier that inhibits hydrogen production, was used to increase NADH availability and butyric acid production while eliminating acetic acid accumulation by facilitating its reassimilation. To better understand the mechanism of and find the optimum condition for BV effect on enhancing acetate assimilation and butyric acid production, BV at various concentrations and addition times during the fermentation were studied. Compared with the control without BV, the addition of 1 μM BV increased butyric acid production from glucose by ∼50% in yield and ∼29% in productivity while acetate production was completely inhibited. Furthermore, BV also increased the coutilization of glucose and exogenous acetate for butyric acid production. At a concentration ratio of acetate (g/L) to BV (mM) of 4, both acetate assimilation and butyrate biosynthesis increased with increasing the concentrations of BV (0-6.25 μM) and exogenous acetate (0-25 g/L). In a fed-batch fermentation with glucose and ∼15 g/L acetate and 3.75 μM BV, butyrate production reached 55.9 g/L with productivity 0.93 g/L/h, yield 0.48 g/g, and 97.4% purity, which would facilitate product purification and reduce production cost. Manipulating metabolic flux and redox balance via BV and acetate addition provided a simple to implement metabolic process engineering approach for butyric acid production from sugars and biomass hydrolysates.

Recent advances in n-butanol and butyrate production using engineered Clostridium tyrobutyricum

Acidogenic clostridia naturally producing acetic and butyric acids has attracted high interest as a novel host for butyrate and n-butanol production. Among them, Clostridium tyrobutyricum is a hyper butyrate-producing bacterium, which re-assimilates acetate for butyrate biosynthesis by butyryl-CoA/acetate CoA transferase (CoAT), rather than the phosphotransbutyrylase-butyrate kinase (PTB-BK) pathway widely found in clostridia and other microbial species. To date, C. tyrobutyricum has been engineered to overexpress a heterologous alcohol/aldehyde dehydrogenase, which converts butyryl-CoA to n-butanol. Compared to conventional solventogenic clostridia, which produce acetone, ethanol, and butanol in a biphasic fermentation process, the engineered C. tyrobutyricum with a high metabolic flux toward butyryl-CoA produced n-butanol at a high yield of > 0.30 g/g and titer of > 20 g/L in glucose fermentation. With no acetone production and a high C4/C2 ratio, butanol was the only major fermentation product by the recombinant C. tyrobutyricum, allowing simplified downstream processing for product purification. In this review, novel metabolic engineering strategies to improve n-butanol and butyrate production by C. tyrobutyricum from various substrates, including glucose, xylose, galactose, sucrose, and cellulosic hydrolysates containing the mixture of glucose and xylose, are discussed. Compared to other recombinant hosts such as Clostridium acetobutylicum and Escherichia coli, the engineered C. tyrobutyricum strains with higher butyrate and butanol titers, yields and productivities are the most promising hosts for potential industrial applications.

Development of novel strategies for higher fermentative biohydrogen recovery along with novel metabolites from organic wastes: The present state of the art

Depletion of fossil fuels and environmental concern has compelled us to search for alternative fuel. Hydrogen is considered as a dream fuel as it has high energy content (142 kJ g^-1 ) and is not chemically bound to carbon. At present, fossil fuel-based methods for producing hydrogen require high-energy input, which makes the processes expensive. The major processes for biohydrogen production are biophotolysis, microbial electrolysis, dark fermentation, and photofermentation. Fermentative hydrogen production has the additional advantages of potentially using various waste streams from different industries as feedstock. Novel strategies to enhance the productivity of fermentative hydrogen production include optimization in pretreatment methods, integrated fermentation systems (sequential and combined fermentation), use of nanoparticles as additives, metabolic engineering of microorganisms, improving the light utilization efficiency, developing more efficient photobioreactors, etc. More focus has been given to produce biohydrogen in a biorefinery approach in which, along with hydrogen gas, other metabolites (ethanol, butyric acid, 1,3-propanediol, etc.) are also produced, which have direct/indirect industrial applications. In present review, various emerging technologies that highlight biohydrogen production methods as effective and sustainable methods on a large scale have been critically reviewed. The possible future developments are also outlined.

Production of n-butanol from cassava bagasse hydrolysate by engineered Clostridium tyrobutyricum overexpressing adhE2: Kinetics and cost analysis

The production of biofuels such as butanol is usually limited by the availability of inexpensive raw materials and high substrate cost. Using food crops as feedstock in the biorefinery industry has been criticized for its competition with food supply, causing food shortage and increased food prices. In this study, cassava bagasse as an abundant, renewable, and inexpensive byproduct from the cassava starch industry was used for n-butanol production. Cassava bagasse hydrolysate containing mainly glucose was obtained after treatments with dilute acid and enzymes (glucoamylases and cellulases) and then supplemented with corn steep liquor for use as substrate in repeated-batch fermentation with engineered Clostridium tyrobutyricum CtΔack-adhE2 in a fibrous-bed bioreactor. Stable butanol production with high titer (>15.0 g/L), yield (>0.30 g/g), and productivity (~0.3 g/L∙h) was achieved, demonstrating the feasibility of an economically competitive process for n-butanol production from cassava bagasse for industrial application.

n-Butanol production from lignocellulosic biomass hydrolysates without detoxification by Clostridium tyrobutyricum Δack-adhE2 in a fibrous-bed bioreactor

Acetone-butanol-ethanol fermentation suffers from high substrate cost and low butanol titer and yield. In this study, engineered Clostridium tyrobutyricum CtΔack-adhE2 immobilized in a fibrous-bed bioreactor was used for butanol production from glucose and xylose present in the hydrolysates of low-cost lignocellulosic biomass including corn fiber, cotton stalk, soybean hull, and sugarcane bagasse. The biomass hydrolysates obtained after acid pretreatment and enzymatic hydrolysis were supplemented with corn steep liquor and used in repeated-batch fermentations. Butanol production with high titer (∼15 g/L), yield (∼0.3 g/g), and productivity (∼0.3 g/L∙h) was obtained from cotton stalk, soybean hull, and sugarcane bagasse hydrolysates, while corn fiber hydrolysate with higher inhibitor contents gave somewhat inferior results. The fermentation process was stable for long-term operation without any noticeable degeneration, demonstrating its potential for industrial application. A techno-economic analysis showed that n-butanol could be produced from lignocellulosic biomass using this novel fermentation process at ∼$2.5/gal for biofuel application.

Engineered Thermoanaerobacterium aotearoense with nfnAB knockout for improved hydrogen production from lignocellulose hydrolysates

BACKGROUND

As a renewable and clean energy carrier, the production of biohydrogen from low-value feedstock such as lignocellulose has increasingly garnered interest. The NADH-dependent reduced ferredoxin:NADP⁺ oxidoreductase (NfnAB) complex catalyzes electron transfer between reduced ferredoxin and NAD(P)⁺, which is critical for production of NAD(P)H-dependent products such as hydrogen and ethanol. In this study, the effects on end-product formation of deletion of nfnAB from Thermoanaerobacterium aotearoense SCUT27 were investigated.

RESULTS

Compared with the parental strain, the NADH/NAD⁺ ratio in the ∆nfnAB mutant was increased. The concentration of hydrogen and ethanol produced increased by (41.1 ± 2.37)% (p < 0.01) and (13.24 ± 1.12)% (p < 0.01), respectively, while the lactic acid concentration decreased by (11.88 ± 0.96)% (p < 0.01) when the ∆nfnAB mutant used glucose as sole carbon source. No obvious inhibition effect was observed for either SCUT27 or SCUT27/∆nfnAB when six types of lignocellulose hydrolysate pretreated with dilute acid were used for hydrogen production. Notably, the SCUT27/∆nfnAB mutant produced 190.63-209.31 mmol/L hydrogen, with a yield of 1.66-1.77 mol/mol and productivity of 12.71-13.95 mmol/L h from nonsterilized rice straw and corn cob hydrolysates pretreated with dilute acid.

CONCLUSIONS

The T. aotearoense SCUT27/∆nfnAB mutant showed higher hydrogen yield and productivity compared with those of the parental strain. Hence, we demonstrate that deletion of nfnAB from T. aotearoense SCUT27 is an effective approach to improve hydrogen production by redirecting the electron flux, and SCUT27/∆nfnAB is a promising candidate strain for efficient biohydrogen production from lignocellulosic hydrolysates.

Development of an in vivo fluorescence based gene expression reporter system for Clostridium tyrobutyricum

C. tyrobutyricum, an acidogenic Clostridium, has aroused increasing interest due to its potential to produce biofuel efficiently. However, construction of recombinant C. tyrobutyricum for enhanced biofuel production has been impeded by the limited genetic engineering tools. In this study, a flavin mononucleotide (FMN)-dependent fluorescent protein Bs2-based gene expression reporter system was developed to monitor transformation and explore in vivo strength and regulation of various promoters in C. tyrobutyricum and C. acetobutylicum. Unlike green fluorescent protein (GFP) and its variants, Bs2 can emit green light without oxygen, which makes it extremely suitable for promoter screening and transformation confirmation in organisms grown anaerobically. The expression levels of bs2 under thiolase promoters from C. tyrobutyricum and C. acetobutylicum were measured and compared based on fluorescence intensities. The capacities of the two promoters in driving secondary alcohol dehydrogenase (adh) gene for isopropanol production in C. tyrobutyricum were distinguished, confirming that this reporter system is a convenient, effective and reliable tool for promoter strength assay and real time monitoring in C. tyrobutyricum, while demonstrating the feasibility of producing isopropanol in C. tyrobutyricum for the first time.

Metabolic engineering of Escherichia coli for the production of butyric acid at high titer and productivity

BACKGROUND

Several anaerobic bacteria produce butyric acid, a commodity chemical with use in chemical, pharmaceutical, food and feed industries, using complex media with acetate as a co-product. Butyrate titer of various recombinant Escherichia coli did not exceed 10 g l^-1 in batch fermentations in any of the media tested.

RESULTS

A recombinant E. coli (strain LW393) that produced butyrate as the major fermentation product was constructed with genes from E. coli, Clostridium acetobutylicum and Treponema denticola. Strain LW393 produced 323 ± 6 mM (28.4 ± 0.4 g l^-1) butyric acid in batch fermentations in mineral salt medium with glucose as C source at a yield of 0.37 ± 0.01 g (g glucose consumed)^-1. Butyrate accounted for 90% of the total products produced by the culture. Supplementing this medium with yeast extract further increased butyric acid titer to 375 ± 4 mM. Average volumetric productivity of butyrate with xylose as C source was 0.89 ± 0.07 g l^-1 h^-1.

CONCLUSIONS

The butyrate titer reported in this study is about 2.5-3-times higher than the values reported for other recombinant E. coli and this is achieved in mineral salt medium with an expectation of lower purification and production cost of butyrate.

Clostridial whole cell and enzyme systems for hydrogen production: current state and perspectives

Strictly anaerobic bacteria of the Clostridium genus have attracted great interest as potential cell factories for molecular hydrogen production purposes. In addition to being a useful approach to this process, dark fermentation has the advantage of using the degradation of cheap agricultural residues and industrial wastes for molecular hydrogen production. However, many improvements are still required before large-scale hydrogen production from clostridial metabolism is possible. Here we review the literature on the basic biological processes involved in clostridial hydrogen production, and present the main advances obtained so far in order to enhance the hydrogen productivity, as well as suggesting some possible future prospects.

Butyric acid: Applications and recent advances in its bioproduction

Butyric acid is an important C4 organic acid with broad applications. It is currently produced by chemosynthesis from petroleum-based feedstocks. However, the fermentative production of butyric acid from renewable feedstocks has received growing attention because of consumer demand for green products and natural ingredients in foods, pharmaceuticals, animal feed supplements, and cosmetics. In this review, strategies for improving microbial butyric acid production, including strain engineering and novel fermentation process development are discussed and compared regarding product yield, titer, purity and productivity. Future perspectives on strain and process improvements for butyric acid production are also discussed.

Production of butyric acid from acid hydrolysate of corn husk in fermentation by Clostridium tyrobutyricum: kinetics and process economic analysis

BACKGROUND

Butyric acid is an important chemical currently produced from petrochemical feedstocks. Its production from renewable, low-cost biomass in fermentation has attracted large attention in recent years. In this study, the feasibility of corn husk, an abundant agricultural residue, for butyric acid production by using Clostridium tyrobutyricum immobilized in a fibrous bed bioreactor (FBB) was evaluated.

RESULTS

Hydrolysis of corn husk (10% solid loading) with 0.4 M H₂SO₄ at 110 °C for 6 h resulted in a hydrolysate containing ~ 50 g/L total reducing sugars (glucose:xylose = 1.3:1.0). The hydrolysate was used for butyric acid fermentation by C. tyrobutyricum in a FBB, which gave 42.6 and 53.0% higher butyric acid production from glucose and xylose, respectively, compared to free-cell fermentations. Fermentation with glucose and xylose mixture (1:1) produced 50.37 ± 0.04 g L^-1 butyric acid with a yield of 0.38 ± 0.02 g g^-1 and productivity of 0.34 ± 0.03 g L^-1 h^-1. Batch fermentation with corn husk hydrolysate produced 21.80 g L^-1 butyric acid with a yield of 0.39 g g^-1, comparable to those from glucose. Repeated-batch fermentations consistently produced 20.75 ± 0.65 g L^-1 butyric acid with an average yield of 0.39 ± 0.02 g g^-1 in three consecutive batches. An extractive fermentation process can be used to produce, separate, and concentrate butyric acid to > 30% (w/v) sodium butyrate at an economically attractive cost for application as an animal feed supplement.

CONCLUSION

A high concentration of total reducing sugars at ~ 50% (w/w) yield was obtained from corn husk after acid hydrolysis. Stable butyric acid production from corn husk hydrolysate was achieved in repeated-batch fermentation with C. tyrobutyricum immobilized in a FBB, demonstrating that corn husk can be used as an economical substrate for butyric acid production.

Assessing the benefits of horizontal gene transfer by laboratory evolution and genome sequencing

BACKGROUND

Recombination is widespread across the tree of life, because it helps purge deleterious mutations and creates novel adaptive traits. In prokaryotes, it often takes the form of horizontal gene transfer from a donor to a recipient bacterium. While such transfer is widespread in natural communities, its immediate fitness benefits are usually unknown. We asked whether any such benefits depend on the environment, and on the identity of donor and recipient strains. To this end, we adapted Escherichia coli to two novel carbon sources over several hundred generations of laboratory evolution, exposing evolving populations to various DNA donors.

RESULTS

At the end of these experiments, we measured fitness and sequenced the genomes of 65 clones from 34 replicate populations to study the genetic changes associated with adaptive evolution. Furthermore, we identified candidate de novo beneficial mutations. During adaptive evolution on the first carbon source, 4-Hydroxyphenylacetic acid (HPA), recombining populations adapted better, which was likely mediated by acquiring the hpa operon from the donor. In contrast, recombining populations did not adapt better to the second carbon source, butyric acid, even though they suffered fewer extinctions than non-recombining populations. The amount of DNA transferred, but not its benefit, strongly depended on the donor-recipient strain combination.

CONCLUSIONS

To our knowledge, our study is the first to investigate the genomic consequences of prokaryotic recombination and horizontal gene transfer during laboratory evolution. It shows that the benefits of recombination strongly depend on the environment and the foreign DNA donor.

Biosynthesis of butyric acid by Clostridium tyrobutyricum

Butyric acid (C₃H₇COOH) is an important chemical that is widely used in foodstuffs along with in the chemical and pharmaceutical industries. The bioproduction of butyric acid through large-scale fermentation has the potential to be more economical and efficient than petrochemical synthesis. In this paper, the metabolic pathways involved in the production of butyric acid from Clostridium tyrobutyricum using hexose and pentose as substrates are investigated, and approaches to enhance butyric acid production through genetic modification are discussed. Finally, bioreactor modifications (including fibrous bed bioreactor, inner disk-shaped matrix bioreactor, fibrous matrix packed in porous levitated sphere carriers), low-cost feedstocks, and special treatments (including continuous fermentation with cell recycling, extractive fermentation with solvent, using different artificial electron carriers) intended to improve the feasibility of commercial butyric acid bioproduction are summarized.

Recent advances and strategies in process and strain engineering for the production of butyric acid by microbial fermentation

Butyric acid is an important platform chemical, which is widely used in the fields of food, pharmaceutical, energy, etc. Microbial fermentation as an alternative approach for butyric acid production is attracting great attention as it is an environmentally friendly bioprocessing. However, traditional fermentative butyric acid production is still not economically competitive compared to chemical synthesis route, due to the low titer, low productivity, and high production cost. Therefore, reduction of butyric acid production cost by utilization of alternative inexpensive feedstock, and improvement of butyric acid production and productivity has become an important target. Recently, several advanced strategies have been developed for enhanced butyric acid production, including bioprocess techniques and metabolic engineering methods. This review provides an overview of advances and strategies in process and strain engineering for butyric acid production by microbial fermentation. Additionally, future perspectives on improvement of butyric acid production are also proposed.

Enhanced butyric acid tolerance and production by Class I heat shock protein-overproducing Clostridium tyrobutyricum ATCC 25755

The response of Clostridium tyrobutyricum to butyric acid stress involves various stress-related genes, and therefore overexpression of stress-related genes can improve butyric acid tolerance and yield. Class I heat shock proteins (HSPs) play an important role in the process of protecting bacteria from sudden changes of extracellular stress by assisting protein folding correctly. The results of quantitative real-time PCR indicated that the Class I HSGs grpE, dnaK, dnaJ, groEL, groES, and htpG were significantly upregulated under butyric acid stress, especially the dnaK and groE operons. Overexpression of groESL and htpG could significantly improve the tolerance of C. tyrobutyricum to butyric acid, while overexpression of dnaK and dnaJ showed negative effects on butyric acid tolerance. Acid production was also significantly promoted by increased GroESL expression levels; the final butyric acid and acetic acid concentrations were 28.2 and 38% higher for C. tyrobutyricum ATCC 25755/groESL than for the wild-type strain. In addition, when fed-batch fermentation was carried out using cell immobilization in a fibrous-bed bioreactor, the butyric acid yield produced by C. tyrobutyricum ATCC 25755/groESL reached 52.2 g/L, much higher than that for the control. The improved butyric acid yield is probably attributable to the high GroES and GroEL levels, which can stabilize the biosynthetic machinery of C. tyrobutyricum under extracellular butyric acid stress.

Butyric acid production from lignocellulosic biomass hydrolysates by engineered Clostridium tyrobutyricum overexpressing xylose catabolism genes for glucose and xylose co-utilization

Clostridium tyrobutyricum can utilize glucose and xylose as carbon source for butyric acid production. However, xylose catabolism is inhibited by glucose, hampering butyric acid production from lignocellulosic biomass hydrolysates containing both glucose and xylose. In this study, an engineered strain of C. tyrobutyricum Ct-pTBA overexpressing heterologous xylose catabolism genes (xylT, xylA, and xylB) was investigated for co-utilizing glucose and xylose present in hydrolysates of plant biomass, including soybean hull, corn fiber, wheat straw, rice straw, and sugarcane bagasse. Compared to the wild-type strain, Ct-pTBA showed higher xylose utilization without significant glucose catabolite repression, achieving near 100% utilization of glucose and xylose present in lignocellulosic biomass hydrolysates in bioreactor at pH 6. About 42.6g/L butyrate at a productivity of 0.56g/L·h and yield of 0.36g/g was obtained in batch fermentation, demonstrating the potential of C. tyrobutyricum Ct-pTBA for butyric acid production from lignocellulosic biomass hydrolysates.

n-Butanol production from sucrose and sugarcane juice by engineered Clostridium tyrobutyricum overexpressing sucrose catabolism genes and adhE2

The production of n-butanol from sugarcane juice by metabolically engineered Clostridium tyrobutyricum Ct(Δack)-pscrBAK overexpressing scr operon genes (scrB, scrA, and scrK) for sucrose catabolism and an aldehyde/alcohol dehydrogenase gene (adhE2) for butanol biosynthesis was studied with corn steep liquor (CSL) as a low-cost nitrogen source. In free cell fermentation, butanol production of ∼16g/L at a yield of 0.31±0.02g/g and productivity of 0.33±0.02g/L·h was obtained from sucrose and yield of 0.24±0.02g/g and productivity of 0.30±0.01g/L·h from sugarcane juice containing sucrose, glucose and fructose. The fermentation was also studied in a fibrous bed bioreactor (FBB) operated in a repeated batch mode for 10 consecutive cycles in 10days, achieving an average butanol yield of 0.21±0.02g/g and productivity of 0.53±0.05g/L·h from sugarcane juice, demonstrating its long-term stability without applying the antibiotic selection pressure.

Insights from the complete genome sequence of Clostridium tyrobutyricum provide a platform for biotechnological and industrial applications

Genetic research enables the evolution of novel biochemical reactions for the production of valuable chemicals from environmentally-friendly raw materials. However, the choice of appropriate microorganisms to support these reactions, which must have strong robustness and be capable of a significant product output, is a major difficulty. In the present study, the complete genome of the Clostridium tyrobutyricum strain CCTCC W428, a hydrogen- and butyric acid-producing bacterium with increased oxidative tolerance was analyzed. A total length of 3,011,209 bp of the C. tyrobutyricum genome with a GC content of 31.04% was assembled, and 3038 genes were discovered. Furthermore, a comparative clustering of proteins from C. tyrobutyricum CCTCC W428, C. acetobutylicum ATCC 824, and C. butyricum KNU-L09 was conducted. The results of genomic analysis indicate that butyric acid is produced by CCTCC W428 from butyryl-CoA through acetate reassimilation via CoA transferase, instead of the well-established phosphotransbutyrylase-butyrate kinase pathway. In addition, we identified ten proteins putatively involved in hydrogen production and 21 proteins associated with CRISPR systems, together with 358 ORFs related to ABC transporters and transcriptional regulators. Enzymes, such as oxidoreductases, HNH endonucleases, and catalase, were also found in this species. The genome sequence illustrates that C. tyrobutyricum has several desirable traits, and is expected to be suitable as a platform for the high-level production of bulk chemicals as well as bioenergy.

Butyric acid production from softwood hydrolysate by acetate-consuming Clostridium sp. S1 with high butyric acid yield and selectivity

The aim of this work was to study the butyric acid production from softwood hydrolysate by acetate-consuming Clostridium sp. S1. Results showed that Clostridium sp. S1 produced butyric acid by simultaneously utilizing glucose and mannose in softwood hydrolysate and, more remarkably, it consumed acetic acid in hydrolysate. Clostridium sp. S1 utilized each of glucose, mannose, and xylose as well as mixed sugars simultaneously with partially repressed xylose utilization. When softwood (Japanese larch) hydrolysate containing glucose and mannose as the main sugars was used, Clostridium sp. S1 produced 21.17g/L butyric acid with the yield of 0.47g/g sugar and the selectivity of 1 (g butyric acid/g total acids) owing to the consumption of acetic acid in hydrolysate. The results demonstrate potential of Clostridium sp. S1 to produce butyric acid selectively and effectively from hydrolysate not only by utilizing mixed sugars simultaneously but also by converting acetic acid to butyric acid.

The acquisition of Clostridium tyrobutyricum mutants with improved bioproduction under acidic conditions after two rounds of heavy-ion beam irradiation

End-product inhibition is a key factor limiting the production of organic acid during fermentation. Two rounds of heavy-ion beam irradiation may be an inexpensive, indispensable and reliable approach to increase the production of butyric acid during industrial fermentation processes. However, studies of the application of heavy ion radiation for butyric acid fermentation engineering are lacking. In this study, a second ¹²C⁶⁺ heavy-ion irradiation-response curve is used to describe the effect of exposure to a given dose of heavy ions on mutant strains of Clostridium tyrobutyricum. Versatile statistical elements are introduced to characterize the mechanism and factors contributing to improved butyric acid production and enhanced acid tolerance in adapted mutant strains harvested from the fermentations. We characterized the physiological properties of the strains over a large pH value gradient, which revealed that the mutant strains obtained after a second round of radiation exposure were most resistant to harsh external pH values and were better able to tolerate external pH values between 4.5 and 5.0. A customized second round of heavy-ion beam irradiation may be invaluable in process engineering.

Deciphering Clostridium tyrobutyricum Metabolism Based on the Whole-Genome Sequence and Proteome Analyses

Clostridium tyrobutyricum is a Gram-positive anaerobic bacterium that efficiently produces butyric acid and is considered a promising host for anaerobic production of bulk chemicals. Due to limited knowledge on the genetic and metabolic characteristics of this strain, however, little progress has been made in metabolic engineering of this strain. Here we report the complete genome sequence of C. tyrobutyricum KCTC 5387 (ATCC 25755), which consists of a 3.07-Mbp chromosome and a 63-kbp plasmid. The results of genomic analyses suggested that C. tyrobutyricum produces butyrate from butyryl-coenzyme A (butyryl-CoA) through acetate reassimilation by CoA transferase, differently from Clostridium acetobutylicum, which uses the phosphotransbutyrylase-butyrate kinase pathway; this was validated by reverse transcription-PCR (RT-PCR) of related genes, protein expression levels, in vitro CoA transferase assay, and fed-batch fermentation. In addition, the changes in protein expression levels during the course of batch fermentations on glucose were examined by shotgun proteomics. Unlike C. acetobutylicum, the expression levels of proteins involved in glycolytic and fermentative pathways in C. tyrobutyricum did not decrease even at the stationary phase. Proteins related to energy conservation mechanisms, including Rnf complex, NfnAB, and pyruvate-phosphate dikinase that are absent in C. acetobutylicum, were identified. Such features explain why this organism can produce butyric acid to a much higher titer and better tolerate toxic metabolites. This study presenting the complete genome sequence, global protein expression profiles, and genome-based metabolic characteristics during the batch fermentation of C. tyrobutyricum will be valuable in designing strategies for metabolic engineering of this strain.

IMPORTANCE

Bio-based production of chemicals from renewable biomass has become increasingly important due to our concerns on climate change and other environmental problems. C. tyrobutyricum has been used for efficient butyric acid production. In order to further increase the performance and expand the capabilities of this strain toward production of other chemicals, metabolic engineering needs to be performed. For this, better understanding on the metabolic and physiological characteristics of this bacterium at the genome level is needed. This work reporting the results of complete genomic and proteomic analyses together with new insights on butyric acid biosynthetic pathway and energy conservation will allow development of strategies for metabolic engineering of C. tyrobutyricum for the bio-based production of various chemicals in addition to butyric acid.

Insights into CO2 Fixation Pathway of Clostridium autoethanogenum by Targeted Mutagenesis

The future sustainable production of chemicals and fuels from nonpetrochemical resources and reduction of greenhouse gas emissions are two of the greatest societal challenges. Gas fermentation, which utilizes the ability of acetogenic bacteria such as Clostridium autoethanogenum to grow and convert CO₂ and CO into low-carbon fuels and chemicals, could potentially provide solutions to both. Acetogens fix these single-carbon gases via the Wood-Ljungdahl pathway. Two enzyme activities are predicted to be essential to the pathway: carbon monoxide dehydrogenase (CODH), which catalyzes the reversible oxidation of CO to CO₂, and acetyl coenzyme A (acetyl-CoA) synthase (ACS), which combines with CODH to form a CODH/ACS complex for acetyl-CoA fixation. Despite their pivotal role in carbon fixation, their functions have not been confirmed in vivo. By genetically manipulating all three CODH isogenes (acsA, cooS1, and cooS2) of C. autoethanogenum, we highlighted the functional redundancies of CODH by demonstrating that cooS1 and cooS2 are dispensable for autotrophy. Unexpectedly, the cooS1 inactivation strain showed a significantly reduced lag phase and a higher growth rate than the wild type on H₂ and CO₂. During heterotrophic growth on fructose, the acsA inactivation strain exhibited 61% reduced biomass and the abolishment of acetate production (a hallmark of acetogens), in favor of ethanol, lactate, and 2,3-butanediol production. A translational readthrough event was discovered in the uniquely truncated (compared to those of other acetogens) C. autoethanogenum acsA gene. Insights gained from studying the function of CODH enhance the overall understanding of autotrophy and can be used for optimization of biotechnological production of ethanol and other commodities via gas fermentation.

Gas fermentation is an emerging technology that converts the greenhouse gases CO₂ and CO in industrial waste gases and gasified biomass into fuels and chemical commodities. Acetogenic bacteria such as Clostridium autoethanogenum are central to this bioprocess, but the molecular and genetic characterization of this microorganism is currently lacking. By targeting all three of the isogenes encoding carbon monoxide dehydrogenase (CODH) in C. autoethanogenum, we identified the most important CODH isogene for carbon fixation and demonstrated that genetic inactivation of CODH could improve autotrophic growth. This study shows that disabling of the Wood-Ljungdahl pathway via the inactivation of acsA (encodes CODH) significantly impairs heterotrophic growth and alters the product profile by abolishing acetate production. Moreover, we discovered a previously undescribed mechanism for controlling the production of this enzyme. This study provides valuable insights into the acetogenic pathway and can be used for the development of more efficient and productive strains for gas fermentation.