One-Dimensional Coordination Polymers: Complexity and Diversity in Structures, Properties, and Applications

Dynamic Interchain Motion in 1D Tetrathiafulvalene-Based Coordination Polymers for Highly Sensitive Molecular Recognition

The application of electrically conductive 1D coordination polymers (1D CPs) in nanoelectronic molecular recognition is theoretically promising yet rarely explored due to the challenges in their synthesis and optimization of electrical properties. In this regard, two tetrathiafulvalene-based 1D CPs, namely [Co(m-H2TTFTB)(DMF)2(H2O)]n (Co-m-TTFTB), and {[Ni(m-H2TTFTB)(CH3CH2OH)1.5(H2O)1.5]·(H2O)0.5}n (Ni-m-TTFTB) are successfully constructed. The shorter S···S contacts between the [M(solvent)3(m-H2TTFTB)]n chains contribute to a significant improvement in their electrical conductivities. The powder X-ray diffraction (PXRD) under different organic solvents reveals the flexible and dynamic structural characteristic of M-m-TTFTB, which, combined with the 1D morphology, lead to their excellent performance for sensitive detection of volatile organic compounds. Co-m-TTFTB achieves a limit of detection for ethanol vapor down to 0.5 ppm, which is superior to the state-of-the-art chemiresistive sensors based on metal-organic frameworks or organic polymers at room temperature. In situ diffuse reflectance infrared Fourier transform spectroscopy, PXRD measurements and density functional theory calculations reveal the molecular insertion sensing mechanism and the corresponding structure-function relationship. This work expands the applicable scenario of 1D CPs and opens a new realm of 1D CP-based nanoelectronic sensors for highly sensitive room temperature gas detection.

Structural Diversity in Ga/In-Hydroxamate Metal-Organic Materials

Developing metal-organic materials (MOMs) with chemical robustness is a prerequisite to exploring their intriguing properties and applications. As part of a continuing effort to construct robust MOMs featuring chelated building units, here we introduce a "bent" thiophene-2,5-dihydroxamate ligand with multiple intrinsic conformations when it is used as a chelating linkage. This approach should further diversify the coordination chemistry in hydroxamate-based MOM structures without compromising the stability. In combination with Group 13 metals Ga/In to ensure homoleptic metal vertices, we report the successful crystallization of four MOMs with diverse structures and dimensionalities: SUM-81 as a 0D metal-organic polyhedron (MOP), SUM-82 as a 2D MOF with an fes topology, SUM-83 and SUM-84 as distinct 1D coordination polymers with shapes mimic stairs and mesh tubes, respectively. As these structures indeed contain the aforementioned different ligand conformations and combinations thereof, these results expand our understanding of the coordination chemistry of hydroxamates. To demonstrate the potential applicability of hydroxamate-chelated robust MOMs, the permanently porous SUM-81 MOP was successfully incorporated in a series of mixed matrix membranes for CO2/N2 separation, showing impressive performances.

A new 1D Mn(II) coordination polymer: Synthesis, crystal structure, hirshfeld surface analysis and molecular docking studies

The synthesis of novel metal-organic coordination polymers (MOCP) with the chemical formula [Mn2L (SCN)2(OH)2]3·CH3OH [L = 1,5-bis(pyridine-4-ylmethylene) carbonohydrazide] {1} was accomplished using two different techniques: solvothermal and sonochemical ultrasonic-assisted. An investigation was carried out to examine the impact of various factors such as reaction time, sonication power, temperature, and reactant concentration on the morphology and size of the crystals. Interestingly, it was found that sonication power and temperature did not affect the crystals' morphology and size. To further analyze the prepared microcrystals of MOCPs, SEM was utilized to examine their surface morphology, and XRD, elemental evaluation composition. The identification of the functional groups present in the prepared Mn-MOCPs was accomplished through the utilization of FT-IR spectroscopy. Subsequently, the calcination of 1 in an air atmosphere at 650 °C led to the formation of Mn3O4 nanoparticles. The geometric and electronic structure of the MOCPs was evaluated using density functional theory (DFT). The utilization of molecular docking methodologies demonstrated that the best cavity of the human androgen receptor possessed an interaction energy of -116.3 kJ mol-1. This energy encompassed a combination of both bonding and non-bonding interactions. The Results showed that steric interaction and electrostatic potential are the main interactions in AR polymer and Mn(II). These interactions in the defined cavity indicated that this polymer could be an effective anti-prostate candidate, because AR is involved in the growth of prostate cancer cells, and these interactions indicated the inhibition of prostate cancer cell growth.

Inorganic-organic hybrid Cu-dipyridyl semiconducting polymers based on the redox-active cluster [SFe3(CO)9]2-: filling the gap in iron carbonyl chalcogenide polymers

The construction of sulfur-incorporated cluster-based coordination polymers was limited and underexplored due to the lack of efficient synthetic routes. Herein, we report facile mechanochemical ways toward a new series of SFe3(CO)9-based dipyridyl-Cu polymers by three-component reactions of [Et4N]2[SFe3(CO)9] ([Et4N]2[1]) and [Cu(MeCN)4][BF4] with conjugated or conjugation-interrupted dipyridyl ligands, 1,2-bis(4-pyridyl)ethylene (bpee), 1,2-bis(4-pyridyl)ethane (bpea), 4,4'-dipyridyl (dpy), or 1,3-bis(4-pyridyl)propane (bpp), respectively. X-ray analysis showed that bpee-containing 2D polymers demonstrated unique SFe3(CO)9 cluster-armed and cluster-one-armed coordination modes via the hypervalent μ5-S atom. These S-Fe-Cu polymers could undergo flexible structural transformations with the change of cluster bonding modes by grinding with stoichiometric amounts of dipyridyls or 1/[Cu(MeCN)4]+. They exhibited semiconducting behaviors with low energy gaps of 1.55-1.79 eV and good electrical conductivities of 3.26 × 10-8-1.48 × 10-6 S cm-1, tuned by the SFe3(CO)9 cluster bonding modes accompanied by secondary interactions in the solid state. The electron transport efficiency of these polymers was further elucidated by solid-state packing, X-ray photoelectron spectroscopy (XPS), X-ray absorption near-edge spectroscopy (XANES), density of states (DOS), and crystal orbital Hamilton population (COHP) analysis. Finally, the solid-state electrochemistry of these polymers demonstrated redox-active behaviors with cathodically-shifted patterns compared to that of [Et4N]2[1], showing that their efficient electron communication was effectively enhanced by introducing 1 and dipyridyls as hybrid ligands into Cu+-containing networks.

A Three-Dimensionally Extended Metal-Organic Ladder Compound Exhibiting Proton Conduction

Ladder systems situated in the dimensional crossover region have attracted much attention because their electronic states and physical properties depend strongly on the electronic correlations among the constituent legs. Generally, two-/three-legged transition metal-oxide ladder compounds are studied as representative ladder systems, but two-/three-dimensional (2D/3D) extensions based on such ladder systems with a few numbers of legs are difficult because of the extreme synthesis conditions. Here, for the first time, we report the successful creation of a 3D extended two-legged ladder compound, [Pt(en)(dpye)I]2(NO3)4 ⋅ 2H2O (en=ethylenediamine; dpye=1,2-Di(4-pyridyl)ethane), which is obtained by simple oxidative polymerization of a small Pt macrocyclic complex using elemental I2. The unique 3D extended lattice consists of 1D mixed-valence halogen-bridged metal chains (⋅⋅⋅Pt-I-Pt-I⋅⋅⋅) and helically arranged macrocyclic units as the constituent legs and rungs, as confirmed by single-crystal X-ray diffraction. Diffuse X-ray scattering analyses and optical measurements revealed that the out-of-phase mixed-valence Pt2+/Pt4+ arrangement arises from the weak interchain correlation among adjacent legs. In addition, this compound shows an increase in proton conductivity by a factor of up to 1000, depending on humidity.

Luminescence turn-on sensor for the selective detection of trace water and methanol based on a Zn(ii) coordination polymer with 2,5-dihydroxyterephthalate

A highly selective detection of trace water in organic solvents is urgently required for the chemical industry. In this work, the simple sonochemical method was used for producing a luminescent sensor, [Zn(H2dhtp)(2,2'-bpy)(H2O)]n (Zn-CP) (H2dhtp2- = 2,5-dihydroxyterephthalate and 2,2'-bpy = 2,2'-bipyridine). Zn-CP exhibits reversible thermally-induced and methanol-mediated structural transformation. Importantly, Zn-CP has exceptional water sensing performance in both dry methanol and dry ethanol, with high selectivity, wide linear ranges, and a low limit of detection (LOD) of 0.08% (v/v). Upon the incremental addition of water, the luminescent intensities enhanced and shifted, along with the emission color changing from green to greenish yellow. In addition, Zn-CP can detect methanol selectively through turn-on luminescence intensity with LODs of 0.28, 0.52, and 0.35% (v/v) in dry ethanol, dry n-propanol, and dry n-butanol, respectively. The excited-state proton transfer of linker H2dhtp2-via enol-keto tautomerism and collaboration with structural transformation could be attributed to the sensing mechanism.

Self-Catalyzed Synthesis of Length-Controlled One-Dimensional Nickel Oxide@N-Doped Porous Carbon Nanostructures from Metal Ion Modified Nitrogen Heterocycles for Efficient Lithium Storage

Transition metal oxides with the merits of high theoretical capacities, natural abundance, low cost, and environmental benignity have been regarded as a promising anodic material for lithium ion batteries (LIBs). However, the severe volume expansion upon cycling and poor conductivity limit their cycling stability and rate capability. To address this issue, NiO embedded and N-doped porous carbon nanorods (NiO@NCNR) and nanotubes (NiO@NCNT) are synthesized by the metal-catalyzed graphitization and nitridization of monocrystalline Ni(II)-triazole coordinated framework and Ni(II)/melamine mixture, respectively, and the following oxidation in air. When applied as an anodic material for LIBs, the NiO@NCNR and NiO@NCNT hybrids exhibit a decent capacity of 895/832 mA h g-1 at 100 mA g-1, high rate capability of 484/467 mA h g-1 at 5.0 A g-1, and good long-term cycling stability of 663/634 mA h g-1 at 600th cycle at 1 A g-1, which are much better than those of NiO@carbon black (CB) control sample (701, 214, and 223 mA h g-1). The remarkable electrochemical properties benefit from the advanced nanoarchitecture of NiO@NCNR and NiO@NCNT, which offers a length-controlled one-dimensional porous carbon nanoarchitecture for effective e-/Li+ transport, affords a flexible carbon skeleton for spatial confinement, and forms abundant nanocavities for stress buffering and structure reinforcement during discharge/charging processes. The rational structural design and synthesis may pave a way for exploring advanced metal oxide based anodic materials for next-generation LIBs.

Solvent-induced structural transformation in a one-dimensional coordination polymer

We have rationally designed a one-dimensional coordination polymer (1D CP), termed 1D-DGIST-18, that exhibits intrinsic structural flexibility. This 1D CP enables its expansion into a three-dimensional network through supramolecular interactions involving coordinated solvents and/or ligands. The strategic selection of solvents for solvent exchange, prior to drying, significantly influences the structures of 1D-DGIST-18 by removing certain coordinating solvents and modulating π-π stacking. Consequently, a hierarchical porosity emerges, ranging from micro- to meso- to macroporous structures, which is attributed to its inherent structural dynamics. Additionally, the formation of excimers endows 1D-DGIST-18, when immersed in acetone, with 'turn-on' fluorescence, as evidenced by fluorescence decay profiles. These structural transitions within 1D-DGIST-18 are further elucidated using single-crystal X-ray diffractometry. The insights from this study provide a foundation for the design of materials with structural dynamics and tunable properties.

Three-Dimensional Polyoxometalate Organic Frameworks with One-Dimensional Channels Constructed by Multiple Helical Chains Based on 22-Core Ln/Mn/Mo Clusters for Proton Conduction

Two unique 22-core sandwich {[Mn6Mo6O37]Ln3[MnMo6O24]} (Ln = La or Pr) units have been assembled, featuring an undisclosed {Mn6Mo6} cluster. This assembly is subsequently integrated into two three-dimensional polyoxometalate organic frameworks, which exhibit one-dimensional hydrophilic hexagonal channels formed by six intertwined 63 helical chains, leading to effective proton conduction primarily facilitated by an abundance of water molecules within the channels.

Luminescent lanthanide mixed N-phthaloylglycinate and terephthalate coordination polymers: Structural and optical properties

A new class of lanthanide mixed-carboxylate ligands compounds with formula {[Ln2 (phthgly)4 (bdc)(H2 O)6 ]·(H2 O)4 }∞ , labelled as Ln3+ : Eu (1) and Gd (2) coordination polymers (CP) were synthesized under mild reaction conditions between lanthanide nitrate salts and a solution of N-phthaloylglycine (phthgly) and terephthalic (bdc) ligands. The (1) and (2) coordination polymers were formed by symmetric binuclear units, in which phthgly and bdc carboxylate ligands are coordinated to the lanthanide ions by different coordination modes. Surprisingly, all organic ligands participate in hydrogen bonding interactions, forming an extremally rigid crystalline structure. The red narrow emission bands from the 5 D0 →7 FJ transitions of the Eu3+ ion show a high colour purity. The intramolecular energy transfer process from L→Eu3+ ion has been discussed. The experimental intensity parameters (Ω2,4 ) reflect lower angular distortion and polarizability of the chemical environment around the metal ion compared with other Eu3+ compounds reported in the literature. This novel class of coordination polymer offers a more attractive platform for developing luminescent functional materials for different applications.

Preparation of pH-sensitive composite polyethersulfone membranes embedded by Ag(I) coordination polymer for the removal of cationic and anionic dyes

A pH-sensitive polyethersulfone (PES) membrane was prepared with the aid of newly synthesized Ag(I) coordination polymer (Ag(I)-CP) particles. Indicating obvious adsorptive property toward dyes, the Ag(I)-based metalorganic framework (MOF) was selected to be used as an additive to improve the dye selectivity of PES membranes for both cationic and anionic dyes. The performance examination and characterization of prepared membranes indicated the influence of Ag(I)-CP in PES membrane improvement. The effect of feed pH approved the membrane response to pH changes in dye removal results. By adjusting feed pH based on pHpzc of Ag(I)-CP, it is possible to remove both anionic and cationic dyes (97% of acid orange 7 (AO) & and 100% of methylene blue (MB)) from the effluent along with an enhanced permeated flux. The results offered a synergism in embedding Ag(I)-CP in PES membrane in dye removal efficiency. The additive particles can be applied with their natural size (200-300 nm) without severe influence on the uniformity of the membrane morphology if the optimum Ag(I)-CP content is considered.

Chemical Chartographisis: a contemporary perspective in molecular design and synthesis

The use of flexible molecular systems in solution, without strictly controlling their behaviour, has frequently been productive. Their potential could increase by a more holistic view of the reaction(s) process(es) in which they are involved. In this perspective, we introduce a broader approach - "Chemical Chartographisis" - and discuss three projects in detail to illustrate its potential. The topics involve bimetallic 3d/4f species and coordination compounds built from benzotriazole-based and (a)symmetric salan ligands and focus on catalytic and, in less detail, biological-related examples.

Regulation of Crystal Structures and Solid-State Photoreactivity of Diolefin Coordination Polymers by Carboxylate Ligands

Olefinic coordination polymers (CPs) have recently drawn more attention, owing to the many possibilities in conformational conversions and photochemical reactivity that olefin molecules offer. In the presence of different carboxylic acids, we utilize one diolefin ligand 4,4'-((1E,1'E)-(2,5-dimethoxyl-1,4-phenylene)bis(ethene-2,1-diyl))dipyridine (OCH3-bpeb) and Cd(II) to assemble six different crystalline CPs (1-6). By fine-tuning the substituent size, carboxyl group number, and geometrical configuration of carboxylate ligands, these diolefin CPs show quite different crystal architecture models, from one-dimensional intersecting stacking to one-dimensional parallel stacking to three-dimensional interpenetrated structure. Of these, four kinds of CPs (1, 2, 5, and 6) are demonstrated to be photoreactive for [2 + 2] cycloaddition reactions, as confirmed by proton nuclear magnetic resonance and single-crystal X-ray diffraction. Both 2 and 5 can be dimerized into different cyclobutane products in a single-crystal-to-single-crystal manner under visible light, and remarkably, the photocycloaddition reaction of 5 involves a rare phase transition with structural symmetry enhancement from P1̅ to P2/n. This work demonstrates the power of carboxylate ligands in tuning single crystal structures and photocycloaddition reactions of CPs, which provides important references for the further exploration of other physicochemical properties of functionalized olefin-containing complexes.

A new route for the syntheses of coordination polymers using magnetic influence: syntheses, crystal structures and fluorescence properties

Five coordination polymers [TM1(absa)(H2O)4]n and [TM2(absa)(bipy)(H2O)]n [TM1 = Zn (1), Co (2); TM2 = Zn (3), Co (4), Cu (5); Na2absa = 5,5'-azobissalicylic acid disodium salt; bipy = 4,4'-bipyride] were synthesized by solvent evaporation under a magnetic field. It is evident that magnetic fields bring significant and noticeable changes to the absa2- ligand orientation and the component movement behaviors to construct coordination polymers. The absa2- ligands bind to the metal ions in bridging coordination mode through the carboxylate groups, in addition to the bipy molecules adopting bridging modes. Photoluminescence measurements indicate that the emissions of compounds 1-5 are at 626, 600, 632, 658 and 682 nm in the solid state, respectively.

A new synthesis strategy for nitrogen-doped carbon nanofibers with cobalt oxide nanoparticles as anodic electrode materials for lithium ion batteries

Nitrogen-doped carbon nanoribbons and nanotubes decorated with Co3O4 nanoparticles were prepared by a metal-catalyzed graphitization-nitridization and oxidization process, using triazole and melamine as a solid nitrogen/carbon co-source, and assessed as anodes of lithium ion batteries (LIBs). These composite anodes display perfect electrochemical performance, indicating their potential for application in LIBs.

Phenylalanine-Based Co2+ and Cd2+ 1D Coordination Polymers: Structural Properties and Catalytic Application for Solvent-Free Aerobic Oxidation of Cycloalkene

Two 1D coordination polymers (CPs) with general formula [M(L)(H2O)(AcO)]n, (M = Co (1) or Cd (2), AcO = acetate anion and L denotes l-phenylalanine based ligand), were synthesized and fully characterized by various spectroscopies (UV-vis, FTIR, and NMR), thermal techniques, magnetic measurements (for 1), and single-crystal and powder X-ray diffraction studies. They can be described as "ribbon-like" 1D polymers constructed through a zigzag arrangement. The polymeric structure is developed due to the coordination mode adopted by the amino acid ligand, classified as μ3-N1O1:O1:O2, which simultaneously links three metal centers. This moiety also plays an important role as a magnetic coupler between metal centers in the cobalt system, which shows a weak antiferromagnetic interaction. Both CPs have also been used in the catalytic oxidation of cyclohexene with molecular oxygen (O2) as an oxidant. Under mild conditions, both compounds demonstrated remarkable catalytic activity, with the cobalt system being more efficient than the cadmium analogue (conversion: 73 and 58% and selectivity for the major product, 2-cyclohexanone: 63 and 55%, for 1 and 2, respectively). Leaching experiments and the results obtained using a radical quencher are consistent with a radical-mediated mechanism for the Co compound. The presence of the superoxide radical was also confirmed using EPR spectroscopy and DMPO as a spin trap, which was further validated by DFT calculations. The activity observed for the Cd analogue is attributed to the organic scaffold assisted by the templating effect of the metal ion.

Synthesis and crystal structure of catena-poly[cobalt(II)-di-μ-chlorido-μ-pyridazine-κ2N1:N2]

The reaction of cobalt dichloride hexa-hydrate with pyridazine leads to the formation of crystals of the title compound, [CoCl2(C4H4N2)]n. This compound is isotypic to a number of compounds with other divalent metal ions. Its asymmetric unit consists of a Co2+ atom (site symmetry 2/m), a chloride ion (site symmetry m) and a pyridazine mol-ecule (all atoms with site symmetry m). The Co2+ cations are coordinated by four chloride anions and two pyridazine ligands, generating trans-CoN4Cl2 octa-hedra, and are linked into [010] chains by pairs of μ-1,1-bridging chloride anions and bridging pyridazine ligands. In the crystal structure, the pyridazine ligands of neighboring chains are stacked onto each other, indicating π-π inter-actions. Powder X-ray diffraction proves that a pure crystalline phase was obtained. Differential thermonalysis coupled to thermogravimetry (DTA-TG) reveal that decomposition is observed at about 710 K. Magnetic measurements indicate low-temperature metamagnetic behavior as already observed in a related compound.

Divalent Heterometal Doped Titanium-Oxide Cluster Polymers: Structures, Photoresponse, and Photocatalysis

Five cluster polymers based on heterometal-doped titanium-oxide cluster (TOC) monomers are reported. The monomers feature Ti10-oxide cluster cores and are connected to the divalent closed-shell heterometal anchors by salicylate ligands. The Sr2+, Ba2+, and Pb2+ dopants cause the monomers to bind head-to-head and generate linear chains, while the Ca2+ and Cd2+ lead to head-to-tail connections and zigzag chains. The cluster polymers are responsive to visible-light up to 565 nm and photo-catalytically active in both H2 evolution and CO2/epoxide cycloaddition reactions. The photo-absorption, photo-charge separation, and photocatalytic properties of the cluster polymers are dependent on the heterometal dopants in order Cd > Pb > Ba > Sr > Ca. Heterometals serve as the catalytic sites in the cluster polymers, which depending on the contribution of the pCB bottom, facilitate photo-charge separation and interfacial charge transfer, further enhancing catalytic activity. The tunable compositions and topologies of the cluster polymers shown herein may inspire the design and synthesis of more multidimensional functional metal-oxide cluster materials for a variety of applications in the future.

Construction of Photoreactive Chiral Metal-Organic Frameworks and Their [2 + 2] Photocycloaddition Reactions

Chiral metal-organic frameworks (CMOFs) and solid-state [2 + 2] photocyclization have been explored as independent areas in crystal engineering. We herein report the photoreactive CMOFs that undergo a [2 + 2] photocycloaddition reaction for the first time. Through the incorporation of a dipyridyl olefin ligand, 1,4-bis[2-(4-pyridyl)ethenyl]benzene, and d-camphoric acid or l-camphoric acid, we constructed a pair of homochiral Zn(II) CMOFs (d-1 or l-1) with a two-dimensional sql topology via a two-step procedure to avoid racemization. Both d-1 and l-1 were photoinert due to the large olefin bond separation. The removal of the solvent molecules between layers enabled them (d-1a and l-1a) to undergo [2 + 2] cycloaddition reactions; d-1a is more reactive (70%) than l-1a (20%) probably due to proper desolvation-induced rearrangement. The photoluminescence properties are also discussed. This work presents a new perspective on photoreactive homochiral network materials with diverse topologies and applications.

In Situ Oxidation of Pyridyl-Dihydrobenzoimidazoquinazoline and the Synthesis of a Highly Luminescent Cd(II) Coordination Polymer: A Promising Candidate for Mutagenic Nitroaromatic Detection and Device Fabrication

Pyridyl-substituted imidazoquinoline, a potent fluorescent framework, is advantageous to architect multifunctional coordination networks for sensing and fabricating emergent electrical conductors. In this work, a Cd(II)-based one-dimensional (1D) coordination polymer (1D CP), [Cd(glu)2(pbiq)2(H2O)]n (1), [H2glu = glutaric acid and pbiq = 4-(6-(pyridin-4-yl)benzo[4,5]imidazo[1,2-c]quinazoline)], has been structurally confirmed by single-crystal X-ray crystallography. The H-bonding and π···π interactions built a three-dimensional (3D) supramolecular structure that strongly emits at 416 nm in acetonitrile suspension. Potentially intrusive nitroaromatics (NAs) and trinitrophenol (TNP) selectively quench the strong emission of 1, and the highest quenching is noted in the case of TNP. A detection limit (limit of detection (LOD)) of 1.51 × 10-7 M for TNP is determined. The band gap (3.31 eV) of 1 recognizes semiconducting behavior, and an electronic device is fabricated. The correlation of current vs voltage (I-V plot) reveals a substantial non-ohmic electrical conductivity of 1 (Λ: 1.10 × 10-5 S m-1) along with a low energy barrier (ΦB: 0.69), and the series resistance (Rs) becomes 6.21 kΩ.

Solid-State Structural Transformation in Zn(II) Metal-Organic Frameworks in a Single-Crystal-to-Single-Crystal Fashion

Solid-state structural transformation is an interesting methodology used to prepare various metal-organic frameworks (MOFs) that are challenging to prepare in direct synthetic procedures. On the other hand, solid-state [2 + 2] photoreactions are distinctive methodologies used for light-driven solid-state transformations. Meanwhile, most of these photoreactions explored are quantitative in nature, in addition to them being stereo-selective and regio-specific in manner. In this work, we successfully synthesized two photoreactive novel binuclear Zn(II) MOFs, [Zn2(spy)2(tdc)2] (1) and [Zn2(spy)4(tdc)2] (2) (where spy = 4-styrylpyridine and tdc = 2,5-thiophenedicarboxylate) with different secondary building units. Both MOFs are interdigitated in nature and are 2D and 1D frameworks, respectively. Both the compounds showed 100% and 50% photoreaction upon UV irradiation, as estimated from the structural analysis for 1 and 2, respectively. This light-driven transformation resulted in the formation of 3D, [Zn2(rctt-ppcb)(tdc)2] (3), and 2D, [Zn2(spy)2(rctt-ppcb)(tdc)2] (4) (where rctt = regio, cis, trans, trans; ppcb = 1,3-bis(4'-pyridyl)-2,4-bis(phenyl)cyclobutane), respectively. These solid-state structural transformations were observed as an interesting post-synthetic modification. Overall, we successfully transformed novel lower-dimensional frameworks into higher-dimensional materials using a solid-state [2 + 2] photocycloaddition reaction.

Insight into the Structural and Emissive Behavior of a Three-Dimensional Americium(III) Formate Coordination Polymer

We report the structural, vibrational, and optical properties of americium formate (Am(CHO2 )3 ) crystals synthesized via the in situ hydrolysis of dimethylformamide (DMF). The coordination polymer features Am3+ ions linked by formate ligands into a three-dimensional network that is isomorphous to several lanthanide analogs, (e. g., Eu3+ , Nd3+ , Tb3+ ). Structure determination revealed a nine-coordinate Am3+ metal center that features a unique local C3v symmetry. The metal-ligand bonding interactions were investigated by vibrational spectroscopy, natural localized molecular orbital calculations, and the quantum theory of atoms in molecules. The results paint a predominantly ionic bond picture and suggest the metal-oxygen bonds increase in strength from Nd-O Collapse

Key Words

• americium
• coordination polymers
• metal-organic frameworks
• photoluminescence
• transuranic

Collapse

MESH Headings Collapse

Grants

• S10 OD024973 NIH HHS
• 2018/07308-4 Fundação de Amparo à Pesquisa do Estado de São Paulo
• 306844/2020-6 CnPq
• FWP 73200, DE-SC0001136 Basic Energy Sciences

Collapse

Affiliation(s)

Aaron D Nicholas Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, WA, 99354, USA
Ana Arteaga Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, WA, 99354, USA
Lucas C Ducati Department of Fundamental Chemistry Institute of Chemistry, University of São Paulo, Av. Prof. Lineu Prestes 748, São Paulo, 05508-000, Brazil
Edgar C Buck Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, WA, 99354, USA
Jochen Autschbach Department of Chemistry, University at Buffalo State University of New York, Buffalo, NY, 14260-3000, USA
Robert G Surbella Pacific Northwest National Laboratory, 902 Battelle Boulevard, Richland, WA, 99354, USA

Collapse

Weakening the Interchain Interactions in One Dimensional Cobalt(II) Coordination Polymers by Preventing Intermolecular Hydrogen Bonding

The reaction of Co(NCS)₂ with N-methylaniline leads to the formation of [Co(NCS)₂(N-methylaniline)₂]_n (1), in which the cobalt(II) cations are octahedrally coordinated and linked into linear chains by pairs of thiocyanate anions. In contrast to [Co(NCS)₂(aniline)₂]_n (2) reported recently, in which the Co(NCS)₂ chains are linked by strong interchain N-H···S hydrogen bonding, such interactions are absent in 1. Computational studies reveal that the cobalt(II) ions in compound 1 show an easy-axis anisotropy that is lower than in 2, but with the direction of the easy axis being similar in both compounds. The high magnetic anisotropy is also confirmed by magnetic and FD-FT THz-EPR spectroscopy, which yield a consistent g_z value. These investigations prove that the intrachain interactions in 1 are slightly higher than in 2. Magnetic measurements reveal that the critical temperature for magnetic ordering in 1 is significantly lower than in 2, which indicates that the elimination of the hydrogen bonds leads to a weakening of the interchain interactions. This is finally proven by FD-FT THz-EPR experiments, which show that the interchain interaction energy in the N-methylaniline compound 1 is nine-fold smaller than in the aniline compound 2.

Water Content-Controlled Formation and Transformation of Concomitant Pseudopolymorph Coordination Polymers

Two concomitant pseudopolymorph coordination polymers {[Cd₂L₂(OAc)₄]·2DMSO} _n (1) and {[CdL(OAc)₂]·2.75H₂O} _n (2) were synthesized by self-assembly of 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene (L) and cadmium acetate in DMSO. Single-crystal X-ray diffraction confirmed that 1D ladder structural motifs exist for pseudopolymorphs 1 and 2 which contain DMSO and water guest molecules, respectively. Our study illustrated the active role of solvent water content in obtaining compound 2. We find that the presence of water as an impurity in the DMSO solvent creates the possibility of formation of concomitant pseudopolymorph coordination polymers which is a unique event. Furthermore, our analyses showed the effect of environmental humidity on the transformation of unstable compound 1. 1D ladder pseudopolymorphic compound 1 could be transformed to guest-free 1D linear compound [CdL(OAc)₂(H₂O)] _n (3') (the powder form of single crystals of 3) through a scarce case of water absorption from air. Also, the crystalline material of coordination polymer 3 was transformed to coordination polymer 2 through the dissolution-recrystallization structural transformation process in DMF or DMSO. Our study clarified that the amount of water in the reaction container can control the formation of one of the compounds 2 or 3. In the presence of a significant amount of water, compound 3 (coordinated water) will be produced, whereas if a small amount of water is present, compound 2 (uncoordinated water) is prepared as an exclusive product.

A Series of Metal-Organic Frameworks with 2,2'-Bipyridyl Derivatives: Synthesis vs. Structure Relationships, Adsorption, and Magnetic Studies

Five new metal-organic frameworks based on Mn(II) and 2,2'-bithiophen-5,5'-dicarboxylate (btdc^2-) with various chelating N-donor ligands (2,2'-bipyridyl = bpy; 5,5'-dimethyl-2,2'-bipyridyl = 5,5'-dmbpy; 4,4'-dimethyl-2,2'-bipyridyl = 4,4'-dmbpy) [Mn₃(btdc)₃(bpy)₂]·4DMF, 1; [Mn₃(btdc)₃(5,5'-dmbpy)₂]·5DMF, 2; [Mn(btdc)(4,4;-dmbpy)], 3; [Mn₂(btdc)₂(bpy)(dmf)]·0.5DMF, 4; [Mn₂(btdc)₂(5,5'-dmbpy)(dmf)]·DMF, 5 (dmf, DMF = N,N-dimethylformamide) have been synthesized, and their crystal structure has been established using single-crystal X-ray diffraction analysis (XRD). The chemical and phase purities of Compounds 1-3 have been confirmed via powder X-ray diffraction, thermogravimetric, and chemical analyses as well as IR spectroscopy. The influence of the bulkiness of the chelating N-donor ligand on the dimensionality and structure of the coordination polymer has been analyzed, and the decrease in the framework dimensionality, as well as the secondary building unit's nuclearity and connectivity, has been observed for bulkier ligands. For three-dimensional (3D) coordination polymer 1, the textural and gas adsorption properties have been studied, revealing noticeable ideal adsorbed solution theory (IAST) CO₂/N₂ and CO₂/CO selectivity factors (31.0 at 273 K and 19.1 at 298 K and 25.7 at 273 K and 17.0 at 298 K, respectively, for the equimolar composition and the total pressure of 1 bar). Moreover, significant adsorption selectivity for binary C₂-C₁ hydrocarbons mixtures (33.4 and 24.9 for C₂H₆/CH₄, 24.8 and 17.7 for C₂H₄/CH₄, 29.3 and 19.1 for C₂H₂/CH₄ at 273 K and 298 K, respectively, for the equimolar composition and the total pressure of 1 bar) has been observed, making it possible to separate on 1 natural, shale, and associated petroleum gas into valuable individual components. The ability of Compound 1 to separate benzene and cyclohexane in a vapor phase has also been analyzed based on the adsorption isotherms of individual components measured at 298 K. The preferable adsorption of C₆H₆ over C₆H₁₂ by 1 at high vapor pressures (V_B/V_CH = 1.36) can be explained by the existence of multiple van der Waals interactions between guest benzene molecules and the metal-organic host revealed by the XRD analysis of 1 immersed in pure benzene for several days (1≅2C₆H₆). Interestingly, at low vapor pressures, an inversed behavior of 1 with preferable adsorption of C₆H₁₂ over C₆H₆ (K_CH/K_B = 6.33) was observed; this is a very rare phenomenon. Moreover, magnetic properties (the temperature-dependent molar magnetic susceptibility, χ_p(T) and effective magnetic moments, μ_eff(T), as well as the field-dependent magnetization, M(H)) have been studied for Compounds 1-3, revealing paramagnetic behavior consistent with their crystal structure.

Nonlinear Optical and Magnetic Properties of FeII-SCN-HgII Isomers: Centrosymmetric Layers and Chiral Networks

Research on isomers is highly desirable due to their prospective role in better understanding of physicochemical properties of similar systems and further development of multifunctional molecular materials. Iron(II) and tetra(thiocyanato)mercury(II) ions self-assembled in the presence of 2-acetylpyridine (2-acpy) excess to form two {[Fe(2-acpy)][Hg(μ-SCN)₄]}_n isomers: two-dimensional (2D) centrosymmetric layers with folded ring structural motifs (1) and three-dimensional (3D) chiral networks with right- or left-handed {···Fe-NCS-Hg-SCN···}_∞ helixes (2). New methods of designing and synthesizing functional thiocyanate-bridged materials have been proposed. In addition, the similarity between 1 and 2 allowed for the description of subtle changes in IR and UV-visible spectra. Moreover, 2 shows spontaneous resolution, and it crystallizes in the noncentrosymmetric space group P2₁, leading to the occurrence of nonlinear optical activity in circular dichroism studies and second harmonic generation (SHG). At room temperature, the SH susceptibility for powder sample 2 reached 6.0 × 10^-11 esu. Ab initio calculations indicated the electric polarization vector and the crystallographic twofold screw axis pass through the aromatic ring. Magnetic studies for 1 and 2 revealed high-spin iron(II) with zero-field splitting at low temperatures. Analysis of magnetic data gave |D| = 37.45 cm^-1, |E/D| = 5.59 cm^-1, and ⟨g⟩ = 2.15 for 1, |D| = 36.78 cm^-1, |E/D| = 4.92 cm^-1, and ⟨g⟩ = 2.18 for 2, and information about the orientation of magnetic anisotropy vectors for both compounds.

Metal Organic Polygons and Polyhedra: Instabilities and Remedies

The field of coordination chemistry has undergone rapid transformation from preparation of monometallic complexes to multimetallic complexes. So far numerous multimetallic coordination complexes have been synthesized. Multimetallic coordination complexes with well-defined architectures are often called as metal organic polygons and polyhedra (MOPs). In recent past, MOPs have received tremendous attention due to their potential applicability in various emerging fields. However, the field of coordination chemistry of MOPs often suffer set back due to the instability of coordination complexes particularly in aqueous environment-mostly by aqueous solvent and atmospheric moisture. Accordingly, the fate of the field does not rely only on the water solubilities of newly synthesized MOPs but very much dependent on their stabilities both in solution and solid state. The present review discusses several methodologies to prepare MOPs and investigates their stabilities under various circumstances. Considering the potential applicability of MOPs in sustainable way, several methodologies (remedies) to enhance the stabilities of MOPs are discussed here.

Isostructural coordination polymers of the tethering naphthalene anchored bis(2-methylpyridinecarboxamide) ligand: single crystal, XPS, EDS and theoretical studies

Interesting correlation between various analytical techniques has been made in this work concerning new isostructural CPs.

Hierarchical Materials from High Information Content Macromolecular Building Blocks: Construction, Dynamic Interventions, and Prediction

Hierarchical materials that exhibit order over multiple length scales are ubiquitous in nature. Because hierarchy gives rise to unique properties and functions, many have sought inspiration from nature when designing and fabricating hierarchical matter. More and more, however, nature's own high-information content building blocks, proteins, peptides, and peptidomimetics, are being coopted to build hierarchy because the information that determines structure, function, and interfacial interactions can be readily encoded in these versatile macromolecules. Here, we take stock of recent progress in the rational design and characterization of hierarchical materials produced from high-information content blocks with a focus on stimuli-responsive and "smart" architectures. We also review advances in the use of computational simulations and data-driven predictions to shed light on how the side chain chemistry and conformational flexibility of macromolecular blocks drive the emergence of order and the acquisition of hierarchy and also on how ionic, solvent, and surface effects influence the outcomes of assembly. Continued progress in the above areas will ultimately usher in an era where an understanding of designed interactions, surface effects, and solution conditions can be harnessed to achieve predictive materials synthesis across scale and drive emergent phenomena in the self-assembly and reconfiguration of high-information content building blocks.

The double polymeric chain of catena-poly[(μ2-6-bromopyridine-3-carboxylato-κ2 O,O′) (6-bromopyridine-3-carboxylato-κ2 O,O′) (μ2-1,2-bis(4-pyridyl)ethylene-κ2 N:N′)cobalt(II)], C24H16CoBr2N4O4

C24H16CoBr2N4O4, monoclinic, P21/c (no. 14), a = 11.1134(4) Å, b = 16.1731(6) Å, c = 13.7057(5) Å, β = 105.363(4)°, V = 2375.41(16) Å3, Z = 4, R gt(F) = 0.0588, wR ref(F 2) = 0.1101, T = 170(2) K.

Coordination-Guided Conformational Locking of 1D Metal-Organic Frameworks for a Tunable Stimuli-Responsive Luminescence Region

One-dimensional (1D) metal-organic frameworks (MOFs) have shown great potential for designing more sensitive and smart stimuli-responsive photoluminescence metal-organic frameworks (PL-MOFs). Herein, we propose a strategy for constructing the 1D MOFs with tunable stimuli-responsive luminescence regions based on coordination-guided conformational locking. Two flexible 1D MOF microcrystals with trans- and cis-coordination modes, respectively, were synthesized by controlling the spatial constraint of solvents. The two 1D frameworks possess different conformation lockings of gain ligands, which have a great influence on the rotating restrictions and corresponding excited-state behaviors, generating the remarkably distinct color-tunable ranges (cyan-blue to green and cyan-blue to yellow, respectively). On this basis, the two 1D MOF materials, benefiting from the varied stimuli-responsive ranges, have displayed great potential in fulfilling the anticounterfeiting and information encryption applications. These results provide valuable guidance for the development of smart MOF-based stimuli-responsive materials in information identification and data encryption.

A Dual Functional 2D MOF Exhibiting Rare Photosalient Effect as well as Selective Pd(II) Sensing in Aqueous Medium

A Zn(II) based two-dimensional metal-organic framework (2D MOF) [Zn₂(suc)₂(4-nvp)₂] (1) [H₂suc = succinic acid and 4-nvp = 4-(1-naphthylvinyl)pyridine] exhibits a "photosalient effect" under UV light as well as sunlight along with the release of a stereoselective cyclobutane ligand, 1,3-bis(4'-pyridyl)-2,4-bis(naphthyl)cyclobutane (rctt-4-pncb). Photolysis of in situ generated MOF in solution also leads to the formation of rctt-4-pncb crystals. Interestingly, compound 1 shows a high selectivity for Pd(II) sensing in aqueous medium.

Lead(II)-Azido Metal–Organic Coordination Polymers: Synthesis, Structure and Application in PbO Nanomaterials Preparation

The current study aims to explain recent developments in the synthesis of Pb(II)-azido metal-organic coordination polymers. Coordination polymers are defined as hybrid materials encompassing metal-ion-based, organic linkers, vertices, and ligands, serving to link the vertices to 1D, 2D, or 3D periodic configurations. The coordination polymers have many applications and potential properties in many research fields, primarily dependent on particular host–guest interactions. Metal coordination polymers (CPs) and complexes have fascinating structural topologies. Therefore, they have found numerous applications in different areas over the past two decades. Azido-bridged complexes are inorganic coordination ligands with higher fascination that have been the subject of intense research because of their coordination adaptability and magnetic diversity. Several sonochemical methods have been developed to synthesize nanostructures. Researchers have recently been interested in using ultrasound in organic chemistry synthetics, since ultrasonic waves in liquids accelerate chemical reactions in heterogeneous and homogeneous systems. The sonochemical synthesis of lead–azide coordination compounds resulted from very fantastic morphologies, and some of these compounds are used as precursors for preparing nano lead oxide. The ultrasonic sonochemistry approach has been extensively applied in different research fields, such as medical imaging, biological cell disruption, thermoplastic welding, food processing, and waste treatment. CPs serve as appropriate precursors for preparing favorable materials at the nanoscale. Using these polymers as precursors is beneficial for preparing inorganic nanomaterials such as metal oxides.

Iodine‐Chemisorption, Interpenetration and Polycatenation: Cationic MOFs and CPs from Group 13 Metal Halides and Di‐Pyridyl‐Linkers

Eight cationic, two‐dimensional metal‐organic frameworks (MOFs) were synthesized in reactions of the group 13 metal halides AlBr₃, AlI₃, GaBr₃, InBr₃ and InI₃ with the dipyridyl ligands 1,2‐di(4‐pyridyl)ethylene (bpe), 1,2‐di(4‐pyridyl)ethane (bpa) and 4,4’‐bipyridine (bipy). Seven of them follow the general formula ²_∞[MX₂(L)₂]A, M=Al, In, X=Br, I, A⁻=[MX₄]⁻, I⁻, I₃⁻, L=bipy, bpa, bpe. Thereby, the porosity of the cationic frameworks can be utilized to take up the heavy molecule iodine in gas‐phase chemisorption vital for the capture of iodine radioisotopes. This is achieved by switching between I⁻ and the polyiodide I₃⁻ in the cavities at room temperature, including single‐crystal‐to‐single‐crystal transformation. The MOFs are 2D networks that exhibit (4,4)‐topology in general or (6,3)‐topology for ²_∞[(GaBr₂)₂(bpa)₅][GaBr₄]₂⋅bpa. The two‐dimensional networks can either be arranged to an inclined interpenetration of the cationic two‐dimensional networks, or to stacked networks without interpenetration. Interpenetration is accompanied by polycatenation. Due to the cationic character, the MOFs require the counter ions [MX₄]⁻, I⁻ or I₃⁻ counter ions in their pores. Whereas the [MX₄]⁻, ions are immobile, iodide allows for chemisorption. Furthermore, eight additional coordination polymers and complexes were identified and isolated that elaborate the reaction space of the herein reported syntheses.

Pt(ii)-coordinated tricomponent self-assemblies of tetrapyridyl porphyrin and dicarboxylate ligands: are they 3D prisms or 2D bow-ties?

Thermodynamically favored simultaneous coordination of Pt(ii) corners with aza- and carboxylate ligands yields tricomponent coordination complexes with sophisticated structures and functions, which require careful structural characterization to paint accurate depiction of their structure-function relationships. Previous reports claimed that heteroleptic coordination of cis-(Et3P)2PtII with tetrapyridyl porphyrins (M'TPP, M' = Zn or H2) and dicarboxylate ligands (XDC) yielded 3D tetragonal prisms containing two horizontal M'TPP faces and four vertical XDC pillars connected by eight Pt(ii) corners, even though such structures were not supported by their 1H NMR data. Through extensive X-ray crystallographic and NMR studies, herein, we demonstrate that self-assembly of cis-(Et3P)2PtII, M'TPP, and four different XDC linkers having varied lengths and rigidities actually yields bow-tie (⋈)-shaped 2D [{cis-(Et3P)2Pt}4(M'TPP) (XDC)2]4+ complexes featuring a M'TPP core and two parallel XDC linkers connected by four heteroleptic PtII corners instead of 3D prisms. This happened because (i) irrespective of their length (∼7-11 Å) and rigidity, the XDC linkers intramolecularly bridged two adjacent pyridyl-N atoms of a M'TPP core via PtII corners instead of connecting two cofacial M'TPP ligands and (ii) bow-tie complexes are entropically favored over prisms. The electron-rich ZnTPP core of a representative bow-tie complex selectively formed a charge-transfer complex with highly π-acidic 1,4,5,8,9,12-hexaazatriphenylene-2,3,6,7,10,11-heaxacarbonitrile but not with a π-donor such as pyrene. Thus, this work not only produced novel M'TPP-based bow-tie complexes and demonstrated their selective π-acid recognition capability, but also underscored the importance of proper structural characterization of supramolecular assemblies to ensure accurate depiction of their structure-property relationships.

Supramolecular Helical Assemblies of Dirhodium(II) Paddlewheels with 1,4-Diazabicyclo[2.2.2]octane: A Remarkable Substituent Effect on the Helical Sense Preference and Amplification of the Helical Handedness Excess of Metallo-Supramolecular Helical Polymers

We report unique coordination-driven supramolecular helical assemblies of a series of dirhodium(II) tetracarboxylate paddlewheels bearing chiral phenyl- or methyl-substituted amide-bound m-terphenyl residues with triethylene glycol monomethyl ether (TEG) or n-dodecyl tails through a 1:1 complexation with 1,4-diazabicyclo[2.2.2]octane (DABCO). The chiral dirhodium complexes with DABCO in CHCl₃/n-hexane (1:1) form one-handed helical coordination polymers with a controlled propeller chirality at the m-terphenyl groups, which are stabilized by intermolecular hydrogen-bonding networks between the adjacent amide groups at the periphery mainly via a cooperative nucleation-elongation mechanism as supported by circular dichroism (CD), vibrational CD, and variable-temperature (VT) absorption and CD analyses. The VT visible-absorption titrations revealed the temperature-dependent changes in the degree of polymerization. The columnar supramolecular helical structures were elucidated by X-ray diffraction and atomic force microscopy. The helix sense of the homopolymer carrying the bulky phenyl and n-dodecyl substituents is opposite those of other chiral homopolymers despite having the same absolute configuration at the pendants. A remarkably strong "sergeants and soldiers" (S&S) effect was observed in most of the chiral/achiral copolymers, while the copolymers of the bulky chiral phenyl-substituted dirhodium complexes with n-dodecyl chains displayed an "abnormal" S&S effect accompanied by an inversion of the helix sense, which could be switched to a "normal" S&S effect by changing the solvent composition. A nonracemic dirhodium complex of 20% enantiomeric excess bearing the less bulky chiral methyl substituents with n-dodecyl chains assembled with DABCO to form an almost one-handed helix (the "majority rule" (MR) effect), whereas the three other nonracemic copolymers showed a weak MR effect.

Rational and site-selective formation of coordination polymers consisting of d10 coinage metal ions with thiolate ligands using a metal ion-doped polymer substrate

Here, we report an interfacial approach for fabricating coordination polymers (CPs) consisting of d10 coinage metal ions with thiolate ligands on a polymer substrate. It was found that CPs were selectively formed on the polymer substrate, resulting in the formation of CP-based thin films. In addition, utilizing a mixed metal ion-doped polymer substrate leads to the formation of mixed-metal CP-based films.