Beyond Photovoltaics: Semiconductor Nanoarchitectures for Liquid-Junction Solar Cells

Charge Transfer from Quantum-Confined 0D, 1D, and 2D Nanocrystals

The properties of colloidal quantum-confined semiconductor nanocrystals (NCs), including zero-dimensional (0D) quantum dots, 1D nanorods, 2D nanoplatelets, and their heterostructures, can be tuned through their size, dimensionality, and material composition. In their photovoltaic and photocatalytic applications, a key step is to generate spatially separated and long-lived electrons and holes by interfacial charge transfer. These charge transfer properties have been extensively studied recently, which is the subject of this Review. The Review starts with a summary of the electronic structure and optical properties of 0D-2D nanocrystals, followed by the advances in wave function engineering, a novel way to control the spatial distribution of electrons and holes, through their size, dimension, and composition. It discusses the dependence of NC charge transfer on various parameters and the development of the Auger-assisted charge transfer model. Recent advances in understanding multiple exciton generation, decay, and dissociation are also discussed, with an emphasis on multiple carrier transfer. Finally, the applications of nanocrystal-based systems for photocatalysis are reviewed, focusing on the photodriven charge separation and recombination processes that dictate the function and performance of these materials. The Review ends with a summary and outlook of key remaining challenges and promising future directions in the field.

Improving the efficiency of quantum dot-sensitized solar cells by increasing the QD loading amount

In quantum dot-sensitized solar cells (QDSCs), optimized quantum dot (QD) loading mode and high QD loading amount are prerequisites for great device performance. Capping ligand-induced self-assembly (CLIS) mode represents the mainstream QD loading strategy in the fabrication of high-efficiency QDSCs. However, there remain limitations in CLIS that constrain further enhancement of QD loading levels. This review illustrates the development of various QD loading methods in QDSCs, with an emphasis on the outstanding merits and bottlenecks of CLIS. Subsequently, thermodynamic and kinetic factors dominating QD loading behaviors in CLIS are analyzed theoretically. Upon understanding driving forces, resistances, and energy effects in a QD assembly process, various novel strategies for improving the QD loading amount in CLIS are summarized, and the related functional mechanism is established. Finally, the article concludes and outlooks some remaining academic issues to be solved, so that higher QD loading amount and efficiencies of QDSCs can be anticipated in the future.

Enhancing the performance of PbS:CsPbBr3 bulk-heterojunction photodetectors by treating with imidazolium-based ionic liquids

All-inorganic lead halide perovskites and quantum dots (QDs) have gained significant attention since their emergence, owing to their immense potential for applications in optoelectronic devices. Here, enhanced-performance broadband photodetectors based on the bulk-heterostructure of a CsPbBr3 perovskite and PbS colloidal quantum dots (CQDs) are presented, and 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM]BF4) ionic liquids as a dual-purpose additive were introduced in the blended film to regulate the surface of QDs by facilitating surface passivation, adjusting energy levels, and coupling with longer alkyl chains as compared to iodide ions (I-). As a result, a superior-quality bulk-heterostructure based photodetector with long-term stability was obtained, showing outstanding performance in photodetection across the visible to near-infrared wavelength range, demonstrating a high photoresponsivity of 22.4 A W-1 with a response time of 16.2 ms and a specific detectivity of 1.58 × 1014 Jones under 405 nm illumination. Thus, this work provides a novel modification strategy for PbS:CsPbBr3 as a promising material for novel optoelectronics.

Induced UV photon sensing properties in narrow bandgap CdTe quantum dots through controlling hot electron dynamics

Mn-doped CdTe (Mn-CdTe) quantum dot (QD) as well as quantum dot solid (QD solid) nanostructures are formed and the established structures are confirmed through HR-TEM analysis. The dynamics of charge carriers in both doped & undoped QD and QD solid structures were investigated by transient absorption (TA) spectroscopy. A slow band edge bleach recovery is obtained for Mn-doped CdTe QD and CdTe QD solid systems at room temperature. Additionally, a blue shifted broad bleach behaviour is identified for the Mn-CdTe QD solid system, which is attributed to hot exciton formation in the solid upon photoexcitation with a higher photon energy than the band gap energy (hν > Eg). This noteworthy process of generation of hot excitons and slow charge recombination occurs by means of a synergetic action of the Mn dopant in the host CdTe QD solid system as well as the extended electronic wave function between the coupled QD solid. Apart from the Mn-assisted delayed relaxation of hot electrons in the QD solid, a suppression in dark current as well as a high ION/IOFF ratio of 3203.12 at 1 V is observed in the Mn-CdTe QD-solid based photosensitized device in the visible region. Furthermore, we were able to improve the UV photon harvesting property in a narrow band gap Mn-CdTe QD solid through reducing the higher excited carrier's energy losses.

Photoelectrochemical Engineering for Light-Assisted Rechargeable Metal Batteries: Mechanism, Development, and Future

Rechargeable battery devices with high energy density are highly demanded by  our  modern society. The use of metal anodes is extremely attractive for future rechargeable battery devices. However, the notorious metal dendritic and instability of solid electrolyte interface issues pose a series of challenges for metal anodes. Recently, considering the indigestible dynamical behavior of metal anodes, photoelectrochemical engineering of light-assisted metal anodes have been rapidly developed since they efficiently utilize the integration and synergy of oriented crystal engineering and photocatalysis engineering, which provided a potential way to unlock the interface electrochemical mechanism and deposition reaction kinetics of metal anodes. This review starts with the fundamentals of photoelectrochemical engineering and follows with the state-of-art advance of photoelectrochemical engineering for light-assisted rechargeable metal batteries where photoelectrode materials, working principles, types, and practical applications are explained. The last section summarizes the major challenges and some invigorating perspectives for future research on light-assisted rechargeable metal batteries.

Tandem cells for unbiased photoelectrochemical water splitting

Hydrogen is an essential energy carrier which will address the challenges posed by the energy crisis and climate change. Photoelectrochemical water splitting (PEC) is an important method for producing solar-powered hydrogen. The PEC tandem configuration harnesses sunlight as the exclusive energy source to drive both the hydrogen (HER) and oxygen evolution reactions (OER), simultaneously. Therefore, PEC tandem cells have been developed and gained tremendous interest in recent decades. This review describes the current status of the development of tandem cells for unbiased photoelectrochemical water splitting. The basic principles and prerequisites for constructing PEC tandem cells are introduced first. We then review various single photoelectrodes for use in water reduction or oxidation, and highlight the current state-of-the-art discoveries. Second, a close look into recent developments of PEC tandem cells in water splitting is provided. Finally, a perspective on the key challenges and prospects for the development of tandem cells for unbiased PEC water splitting are given.

Menezes L, Tittl A, Ren H, Maier SA. Optical Metasurfaces for Energy Conversion

Nanostructured surfaces with designed optical functionalities, such as metasurfaces, allow efficient harvesting of light at the nanoscale, enhancing light-matter interactions for a wide variety of material combinations. Exploiting light-driven matter excitations in these artificial materials opens up a new dimension in the conversion and management of energy at the nanoscale. In this review, we outline the impact, opportunities, applications, and challenges of optical metasurfaces in converting the energy of incoming photons into frequency-shifted photons, phonons, and energetic charge carriers. A myriad of opportunities await for the utilization of the converted energy. Here we cover the most pertinent aspects from a fundamental nanoscopic viewpoint all the way to applications.

Integrated Photovoltaic Charging and Energy Storage Systems: Mechanism, Optimization, and Future

As an emerging solar energy utilization technology, solar redox batteries (SPRBs) combine the superior advantages of photoelectrochemical (PEC) devices and redox batteries and are considered as alternative candidates for large-scale solar energy capture, conversion, and storage. In this review, a systematic summary from three aspects, including: dye sensitizers, PEC properties, and photoelectronic integrated systems, based on the characteristics of rechargeable batteries and the advantages of photovoltaic technology, is presented. The matching problem of high-performance dye sensitizers, strategies to improve the performance of photoelectrode PEC, and the working mechanism and structure design of multienergy photoelectronic integrated devices are mainly introduced and analyzed. In particular, the devices and improvement strategies of high-performance electrode materials are analyzed from the perspective of different photoelectronic integrated devices (liquid-based and solid-state-based). Finally, future perspectives are provided for further improving the performance of SPRBs. This work will open up new prospects for the development of high-efficiency photoelectronic integrated batteries.

Solar-to-Chemical Fuel Conversion via Metal Halide Perovskite Solar-Driven Electrocatalysis

Sunlight is an abundant and clean energy source, the harvesting of which could make a significant contribution to society's increasing energy demands. Metal halide perovskites (MHP) have recently received attention for solar fuel generation through photocatalysis and solar-driven electrocatalysis. However, MHP photocatalysis is limited by low solar energy conversion efficiency, poor stability, and impractical reaction conditions. Compared to photocatalysis, MHP solar-driven electrocatalysis not only exhibits higher solar conversion efficiency but also is more stable when operating under practical reaction conditions. In this Perspective, we outline three leading types of MHP solar-driven electrocatalysis device technologies now in the research spotlight, namely, (1) photovoltaic-electrochemical (PV-EC), (2) photovoltaic-photoelectrochemical (PV-PEC), and (3) photoelectrochemical (PEC) approaches for solar-to-fuel reactions, including water-splitting and the CO₂ reduction reaction. In addition, we compare each technology to show their relative technical advantages and limitations and highlight promising research directions for the rapidly emerging scientific field of MHP-based solar-driven electrocatalysis.

Cytotoxicity of ZnO Nanoparticle Under Dark via Oxygen Vacancy Dependent Reactive Oxygen Species Generation

Antimicrobial and cytotoxic effect of zinc oxide nanomaterials are popularly thought due to zinc ion leaching, but the exact mechanism of cytotoxicity is controversial and not fully understood. Recent works...

Visible-Light-Driven Water Oxidation on Self-Assembled Metal-Free Organic@Carbon Junctions at Neutral pH

Sustainable water oxidation requires low-cost, stable, and efficient redox couples, photosensitizers, and catalysts. Here, we introduce the in situ self-assembly of metal-atom-free organic-based semiconductive structures on the surface of carbon supports. The resulting TTF/TTF^•+@carbon junction (TTF = tetrathiafulvalene) acts as an all-in-one highly stable redox-shuttle/photosensitizer/molecular-catalyst triad for the visible-light-driven water oxidation reaction (WOR) at neutral pH, eliminating the need for metallic or organometallic catalysts and sacrificial electron acceptors. A water/butyronitrile emulsion was used to physically separate the photoproducts of the WOR, H⁺ and TTF, allowing the extraction and subsequent reduction of protons in water, and the in situ electrochemical oxidation of TTF to TTF^•+ on carbon in butyronitrile by constant anode potential electrolysis. During 100 h, no decomposition of TTF was observed and O₂ was generated from the emulsion while H₂ was constantly produced in the aqueous phase. This work opens new perspectives for a new generation of metal-atom-free, low-cost, redox-driven water-splitting strategies.

Visible-Light-Driven Oxidative Cleavage of Alkenes Using Water-Soluble CdSe Quantum Dots

The oxidative cleavage of C=C bonds is an important chemical reaction, which is a popular reaction in the photocatalytic field. However, high catalyst-loading and low turnover number (TON) are general shortcomings in reported visible-light-driven reactions. Herein, the direct oxidative cleavage of C=C bonds through water-soluble CdSe quantum dots (QDs) is described under visible-light irradiation at room temperature with high TON (up to 3.7×10⁴ ). Under the same conditions, water-soluble CdSe QDs could also oxidize sulfides to sulfoxides with 51-84 % yields and TONs up to 3.4×10⁴ . The key features of this photocatalytic protocol include high TONs, wide substrates scope, low catalyst loadings, simple and mild reaction conditions, and molecular O₂ as the oxidant.

Comparison of Ligand Architecture on Vapor Deposition Precursors: Synthesis, Characterization, and Reactivity of Volatile Cadmium Bis-Amidinate Complexes

The lack of low-temperature (<200 °C) and easy-to-handle vapor deposition precursors for cadmium has been a limitation for cadmium chalcogenide ALD. Here, the cadmium amidinate system is presented as a scaffold for vapor deposition precursor design because the alkyl groups can be altered to change the properties of the precursor. Thus, the molecular structure affects the precursor stability at elevated temperature, onset of volatility, and reactivity. Cadmium bis-N,N-diisopropylacetamidinate (1) was synthesized and evaluated for its thermal stability, volatility, and reactivity-properties relevant to ALD precursors. Compounds 2, cadmium bis-N,N-diisopropyltertertiarybutylamidinate, and 3, cadmium bis-N,N-diisopropylbutylamidinate, are analogous to 1 and were synthesized by substituting the alkyl group on the bridging carbon during amidinate synthesis. All three compounds are volatile under reduced pressure, and thermal stability studies showed 1 and 3 to be stable at 100 °C in solution for days to weeks, while 2 decomposed at 100 °C within 24 h. Solution phase reactivity studies show 1 to be reactive with thiols at room temperature in a stoichiometric manner. No reactivity with either bis-silyl sulfides or alkyl sulfides was observed up to 110 °C over more than 3 days. Overall, the cadmium amidinate compounds presented here show potential as precursors in ALD/CVD processing, which can contribute to research critical for semiconductor processing.

Improving the Efficiency of Quantum Dot Sensitized Solar Cells beyond 15% via Secondary Deposition

Low loading is one of the bottlenecks limiting the performance of quantum dot sensitized solar cells (QDSCs). Although previous QD secondary deposition relying on electrostatic interaction can improve QD loading, due to the introduction of new recombination centers, it is not capable of enhancing the photovoltage and fill factor. Herein, without the introduction of new recombination centers, a convenient QD secondary deposition approach is developed by creating new adsorption sites via the formation of a metal oxyhydroxide layer around QD presensitized photoanodes. MgCl₂ solution treated Zn-Cu-In-S-Se (ZCISSe) QD sensitized TiO₂ film electrodes have been chosen as a model device to investigate this secondary deposition approach. The experimental results demonstrate that additional 38% of the QDs are immobilized on the photoanode as a single layer. Due to the increased QD loading and concomitant enhanced light-harvesting capacity and reduced charge recombination, not only photocurrent but also photovoltage and fill factor have been remarkably enhanced. The average PCE of resulted ZCISSe QDSCs is boosted to 15.31% (J_sc = 26.52 mA cm^-2, V_oc = 0.802 V, FF = 0.720), from the original 13.54% (J_sc = 24.23 mA cm^-2, V_oc = 0.789 V, FF = 0.708). Furthermore, a new certified PCE record of 15.20% has been obtained for liquid-junction QDSCs.

Zn-Cu-In-S-Se Quinary "Green" Alloyed Quantum-Dot-Sensitized Solar Cells with a Certified Efficiency of 14.4

The photoelectronic properties of quantum dots (QDs) have a critical impact on the performance of quantum-dot-sensitized solar cells (QDSCs). Currently, I-III-VI group QDs have become the mainstream light-harvesting materials in high-performance QDSCs. However, it is still a great challenge to achieve satisfactory efficiency for light-harvesting, charge extraction, and charge collection simultaneously in QDSCs. We design and prepare Zn_0.4 Cu_0.7 In_1.0 S_x Se_2-x (ZCISSe) quinary alloyed QDs by cation/anion co-alloying strategy. The critical photoelectronic properties of target QDs, including band gap, conduction band energy level, and density of defect trap states, can be conveniently tailored. Experimental results demonstrate that the ZCISSe quinary alloyed QDs can achieve an ideal balance among light-harvesting, photogenerated electron extraction, and charge-collection efficiencies in QDSCs compared to its single anion or cation quaternary alloyed QD counterparts. Consequently, the quinary alloyed QDs boost the certified efficiency of QDSCs to 14.4 %, which is a new efficiency record for liquid-junction QD solar cells.

Design Principles and Developments of Integrated Solar Flow Batteries

ConspectusDue to the intermittent nature of sunlight, practical round-trip solar energy utilization systems require both efficient solar energy conversion and inexpensive large-scale energy storage. Conventional round-trip solar energy utilization systems typically rely on the combination of two or more separated devices to fulfill such requirements. Integrated solar flow batteries (SFBs) are a new type of device that integrates solar energy conversion and electrochemical storage. In SFBs, the solar energy absorbed by photoelectrodes is converted into chemical energy by charging up redox couples dissolved in electrolyte solutions in contact with the photoelectrodes. To deliver electricity on demand, the reverse redox reactions are carried out to release chemical energy stored in redox couples as one would do in the discharge of a normal redox flow battery (RFB). The integrated design of SFBs enables all the functions demanded by round trip solar energy utilization systems to be realized within a single device. Leveraging rapidly developing parallel technologies of photovoltaic solar cells and RFBs, significant progress in the field of SFBs has been made in the past few years. This Account aims to provide a general reference and tutorial for researchers who are interested in SFBs, and to describe the design principles and thus facilitate the development of this nascent field.The operation principle of SFBs is built on the working mechanism of RFBs and photoelectrochemical (PEC) cells, so we first describe the basic concept and important features of RFBs and redox couples with the emphasis on the quantitative understanding of RFB cell potentials. We also introduce different types of PEC cells and highlight two different photoelectrode designs that are commonly seen in SFB literature: simple semiconductor photoelectrodes and PV cell photoelectrodes. A set of experimental protocols for characterizing the redox couples, RFBs, photoelectrodes, and SFBs are presented to promote comparable assessment and discussion of important figures of merits of SFBs.Solar-to-output electricity efficiency (SOEE) defines the round trip energy efficiency of SFBs and has received substantial research attention. We introduce a quantitative simulation method to find the relationship between the SOEE and cell potential of SFBs and reveal the design principles for highly efficient SFBs. Several other important performance metrics of SFBs are also introduced. Then we review the historical development of SFBs and identify the state-of-the-art demonstrations at each development stage with more emphasis on our own research efforts in developing SFBs built with PV photoelectrodes. Finally, we preview some promising future directions and the challenges for advancing both the scientific understanding and practical applications of SFBs.

A large-area luminescent downshifting layer containing an Eu3+ complex for crystalline silicon solar cells

We present a large-area luminescent down-shifting layer consists of polyvinyl alcohol embedding a newly synthesized ternary Eu³⁺ complex. C-Si solar cell coated with this layer displayed an enhancement of ~15% in external quantum efficiency.

Al/Zn co-incorporated Cu–In–Se quantum dots for high efficiency quantum dot sensitized solar cells

A facile method for synthesizing high-quality Cu–In–Se quantum dots (QDs) was developed by Al/Zn co-incorporation. Benefiting from the reduction of trap-state defects in QDs, the efficiency of solar cells basing prepared QDs is obviously improved.

Microstructure characteristics of non-monodisperse quantum dots: on the potential of transmission electron microscopy combined with X-ray diffraction

Capability of TEM and XRD to reveal scale-bridging information about the microstructure of non-monodisperse quantum dots is illustrated on the CdSe quantum dots synthesized using an automated hot-injection method.

Boosting the Performance of Environmentally Friendly Quantum Dot-Sensitized Solar Cells over 13% Efficiency by Dual Sensitizers with Cascade Energy Structure

Generally, high light-harvesting efficiency, electron-injection efficiency, and charge-collection efficiency are the prerequisites for high-efficiency quantum-dot-sensitized solar cells (QDSCs). However, it is fairly difficult for a single QD sensitizer to meet these three requirements simultaneously. It is demonstrated that these parameters can be felicitously balanced by a cosensitization strategy through the adoption of environmental-friendly Zn-Cu-In-Se and Zn-Cu-In-S dual QD sensitizers with cascade energy structure. Experimental results indicate that: i) the combination of the dual QDs can improve the light-harvesting capability of the cells, especially in the visible light window; ii) the cosensitization approach can facilitate electron injection, benefitting from the cascade energy structure of the two QD sensitizers employed; iii) the charge-collection efficiency can be remarkably enhanced by the suppressed charge-recombination process due to the improved QD coverage on TiO₂ . Consequently, this cosensitization strategy delivers a new certified efficiency record of 12.98% for liquid-junction QDSCs under AM 1.5G 1 sun irradiation. Moreover, the constructed cells exhibit good stability in a high-humidity environment.

ZnSxSe1-x Alloy Passivation Layer for High-Efficiency Quantum-Dot-Sensitized Solar Cells

Interface modification is an important means for improving the performance of almost all optoelectronic devices. In quantum-dot-sensitized solar cells (QDSCs), effective surface modification of photoanode also has a critical impact on photovoltaic performance. At present, ZnS and ZnSe wide band gap semiconductors are the mainstream materials used for photoanode/electrolyte interface passivation in QDSCs. However, the problem with these two materials is that the passivation effect and the lattice match with TiO₂/QD are difficult to be balanced. Although ZnS can form a larger energetic barrier due to the higher conduction band edge, its lattice mismatch with TiO₂ and QD (such as CdSe and CuInSe₂) is large, leading to the formation of additional defect states. On the contrary, ZnSe has a small lattice mismatch with TiO₂ and QD but a relatively lower conduction band edge. Herein, we propose a strategy to employ ZnS_xSe_1-x alloy materials as a passivation layer for the first time to solve the drawbacks of single-component passivation layers. The ZnS_xSe_1-x alloy passivation layer was deposited on the Zn-Cu-In-Se (ZCISe) QD-sensitized TiO₂ film electrode via successive ionic layer adsorption and reaction (SILAR) method. A stable polyselenosulfide/sulfide mixed anions were served as anion precursor for the formation of ZnS_xSe_1-x alloy passivation layer. Experimental results revealed that the alloy passivation layer is more favorable for the suppression of charge recombination at the photoanode/electrolyte interface. In addition, the ZnS_xSe_1-x alloy passivation layer can significantly improve the photogenerated electron extraction efficiency compared to the current classical ZnS passivation layer as confirmed by the transient absorption (TA) measurement. Consequently, the average efficiency of QDSCs was improved from 12.17 to 13.08% with the replacement of traditional ZnS passivation layer by ZnSSe-10 under AM 1.5G one full sun illumination.

Efficiency Enhancement of Solid-State CuInS2 Quantum Dot-Sensitized Solar Cells by Improving the Charge Recombination

Copper indium sulfide quantum dots (CuInS₂ QDs) were incorporated into a nanocrystalline TiO₂ film by using spin coating-assisted successive ionic layer adsorption and reaction process to fabricate CuInS₂ QD-sensitized TiO₂ photoelectrodes for the solid-state quantum dot-sensitized solar cell (QDSSC) applications. The result shows that the photovoltaic performance of solar cell is extremely dependent on the number of cycles, which has an appreciable impact on the coverage ratio of CuInS₂ on the surface of TiO₂ and the density of surface defect states. In the following high-temperature annealing process, it is found that annealing TiO₂/CuInS₂ photoelectrode at a suitable temperature would be beneficial for decreasing the charge recombination and accelerating the charge transport. After annealing at 400 °C, a significantly enhanced photovoltaic properties of solid-state CuInS₂ QDSSCs are obtained, achieving the power conversion efficiency (PCE) of 3.13%, along with an open-circuit voltage (V_OC) of 0.68 V, a short-circuit photocurrent density (J_SC) of 11.33 mA cm^-2, and a fill factor (FF) of 0.41. The enhancement in the performance of solar cells is mainly ascribed to the suppression of charge recombination and the promotion of the electron transfer after annealing.

Enhancing Loading Amount and Performance of Quantum-Dot-Sensitized Solar Cells Based on Direct Adsorption of Quantum Dots from Bicomponent Solvents

Intrinsically weak interaction between oil-soluble quantum dots (QDs) and TiO₂ in a direct adsorption process limits QD loading and the performance of QD-sensitized solar cells (QDSCs). Herein, the underlying chemistry and mechanisms governing QD adsorption on TiO₂ were studied to improve QD loading and cell performance. Experimental results indicate that solvent polarity plays the crucial role in determining QD loading. Compared with single-component solvents, substantially greater QD loading can be realized at the critical point (CP) of bicomponent solvents, where QDs become metastable and start to precipitate. Through this strategy, average efficiency of 12.24% was obtained for ZCISe QDSCs, which is comparable to those based on the capping ligand induced self-assembly route. This report demonstrates the great potential of bicomponent solvents at the CP for high QD loading and excellent cell performance and presents a platform for assembling functional composites with the use of different nanocrystals and substrates.

Colloidal semiconductor nanocrystals in energy transfer reactions

Excitonic energy transfer is a versatile mechanism by which colloidal semiconductor nanocrystals can interact with a variety of nanoscale species. This feature article will discuss the latest research on the key scenarios under which semiconductor nanocrystals can engage in energy transfer with other nanoparticles, organic fluorophores, and plasmonic nanostructures, highlighting potential technological benefits to be gained from such processes.

Facile synthesized ZnO microcrystals for random microlasers and incandescent-type light sources

Well-crystallized ZnO microcrystals (MCs) with a well-faceted, smooth surface were successfully synthesized and employed to construct ultraviolet microsized random lasers.

Tenacic Acids: A New Class of Tenacious Binders to Metal Oxide Surfaces

The backbone of 2-hydroxyisophthalic acid was identified as a potential metal oxide anchor because of the perfect alignment of all three of its donor groups for binding to inorganic surfaces. It can therefore be used in the design of organic linkers for metal oxide based hybrid materials. Optimized and scalable methods for the synthesis of 2-hydroxyisophthalic acid (1) and its 5-substituted derivatives: 5-bromo- (2), 5-sulfooxy- (3), 5-hydroxy- (4), and 5-PEG600 (5) are presented. Dynamic light scattering (DLS) demonstrated that compound 2 inhibits Fe(OH)3 precipitation when FeIII aqueous solutions are titrated with NaOH, while similar titrations in the presence of the structurally-related isophthalic and salicylic acids, both missing the third donor group, show turbidity at pHs as low as 2.3 and 3.5, respectively. The adduct synthesized from 4.5 nm γ-Fe2 O3 nanoparticles and 5 is water-, alcohol- and CH2 Cl2 -soluble, and forms stable aqueous colloids in the pH range of 4.4-8.7. Moreover, at a pH close to neutral these colloids survive at 100 °C, demonstrating the high practicality of 2-hydroxyisophthalic acid for nanoparticulate inorganic/organic hybrid material design.

Interface Engineering in Quantum-Dot-Sensitized Solar Cells

The unique properties of II-VI semiconductor nanocrystals such as superior light absorption, size-dependent optoelectronic properties, solution processability, and interesting photophysics prompted quantum-dot-sensitized solar cells (QDSSCs) as promising candidates for next-generation photovoltaic (PV) technology. QDSSCs have advantages such as low-cost device fabrication, multiple exciton generation, and the possibility to push over the theoretical power conversion efficiency (PCE) limit of 32%. In spite of dedicated research efforts to enhance the PCE, optimize individual solar cell components, and better understand the underlying science, QDSSCs have unfortunately not lived up to their potential due to shortcomings in the fabrication process and with the QDs themselves. In this feature article, we briefly discuss the QDSSC concepts and mechanisms of the charge carrier recombination pathways that occur at multiple interfaces, viz., (i) metal oxide (MO)/QDs, (ii) MO/QDs/electrolyte, and (iii) counter electrode (CE)/electrolyte. The rational strategies that have been developed to minimize/block these charge recombination pathways are elaborated. The article concludes with a discussion of the present challenges in fabricating efficient devices and future prospects for QDSSCs.

Integrated Photoelectrochemical Solar Energy Conversion and Organic Redox Flow Battery Devices

Building on regenerative photoelectrochemical solar cells and emerging electrochemical redox flow batteries (RFBs), more efficient, scalable, compact, and cost-effective hybrid energy conversion and storage devices could be realized. An integrated photoelectrochemical solar energy conversion and electrochemical storage device is developed by integrating regenerative silicon solar cells and 9,10-anthraquinone-2,7-disulfonic acid (AQDS)/1,2-benzoquinone-3,5-disulfonic acid (BQDS) RFBs. The device can be directly charged by solar light without external bias, and discharged like normal RFBs with an energy storage density of 1.15 Wh L^-1 and a solar-to-output electricity efficiency (SOEE) of 1.7 % over many cycles. The concept exploits a previously undeveloped design connecting two major energy technologies and promises a general approach for storing solar energy electrochemically with high theoretical storage capacity and efficiency.

Solar light harvesting with multinary metal chalcogenide nanocrystals

The paper reviews the state of the art in the synthesis of multinary (ternary, quaternary and more complex) metal chalcogenide nanocrystals (NCs) and their applications as a light absorbing or an auxiliary component of light-harvesting systems. This includes solid-state and liquid-junction solar cells and photocatalytic/photoelectrochemical systems designed for the conversion of solar light into the electric current or the accumulation of solar energy in the form of products of various chemical reactions. The review discusses general aspects of the light absorption and photophysical properties of multinary metal chalcogenide NCs, the modern state of the synthetic strategies applied to produce the multinary metal chalcogenide NCs and related nanoheterostructures, and recent achievements in the metal chalcogenide NC-based solar cells and the photocatalytic/photoelectrochemical systems. The review is concluded by an outlook with a critical discussion of the most promising ways and challenging aspects of further progress in the metal chalcogenide NC-based solar photovoltaics and photochemistry.