Electrolytes in dye-sensitized solar cells

Advancements in Carbazole-Based Sensitizers and Hole-Transport Materials for Enhanced Photovoltaic Performance

Carbazole-based molecules play a significant role in dye-sensitized solar cells (DSSCs) due to their advantageous properties. Carbazole derivatives are known for their thermal stability, high hole-transport capability, electron-rich (p-type) characteristics, elevated photoconductivity, excellent chemical stability, and commercial availability. This review focuses on DSSCs, including their structures, working principles, device characterization, and the photovoltaic performance of carbazole-based derivatives. Specifically, it covers compounds such as 2,7-carbazole and indolo[3,2-b]carbazole, which are combined with various acceptors like benzothiadiazole, thiazolothiazole, diketopyrrolopyrrole, and quinoxaline, as reported over the past decade. The review will also outline the relationship between molecular structure and power-conversion efficiencies. Its goal is to summarize recent research and advancements in carbazole-based dyes featuring a D-π-A architecture for DSSCs. Additionally, this review addresses the evolution of carbazole-based hole-transport materials (HTMs), which present a promising alternative to the costly spiro-OMeTAD. We explore the development of novel HTMs that leverage the unique properties of carbazole derivatives to enhance charge transport, stability, and overall device performance. By examining recent innovations and emerging trends in carbazole-based HTMs, we provide insights into their potential to reduce costs and improve the efficiency of DSSCs.

Gels/Hydrogels in Different Devices/Instruments-A Review

Owing to their physical and chemical properties and stimuli-responsive nature, gels and hydrogels play vital roles in diverse application fields. The three-dimensional polymeric network structure of hydrogels is considered an alternative to many materials, such as conductors, ordinary films, constituent components of machines and robots, etc. The most recent applications of gels are in different devices like sensors, actuators, flexible screens, touch panels, flexible storage, solar cells, batteries, and electronic skin. This review article addresses the devices where gels are used, the progress of research, the working mechanisms of hydrogels in those devices, and future prospects. Preparation methods are also important for obtaining a suitable hydrogel. This review discusses different methods of hydrogel preparation from the respective raw materials. Moreover, the mechanism by which gels act as a part of electronic devices is described.

Far-red active unsymmetrical squaraine dyes containing N-arylated indoline donors for dye sensitized solar cells

Squaraine dyes possess sharp far-red active transition with high extinction coefficient and form aggregates on TiO2 surface. Aggregation of dyes on TiO2 has been considered as a detrimental factor for DSSC device performance, which can be controlled by appending alkyl groups to the dye structures. Hence by integrating alkylated (alkyl groups with both in-plane and out-of-plane) aryl group with indoline moiety to make it compatible with other electrolytes and for controlling the dye-aggregation, a series of squaraine acceptor-based dyes SQA4-6 have been designed and synthesized. SQA4-6 dyes showed absorption between 642 and 653 nm (λmax), photophysical and electrochemical studies indicated that the HOMO energy levels of this sets of dyes are well aligned with the potentials of I-/I 3 - and [Co(bpy)3]2+/3+ redox shuttles for better dye regeneration process. DSSC device efficiency of 3% has been achieved for SQA5 dye with iodolyte (I-/I 3 - ) electrolyte in the presence of 0.3 mM of chenodeoxycholic acid (CDCA). The IPCE profile of DSSC device fabricated with SQA4-6 dyes indicated the contribution of aggregated structures for the photocurrent generation.

Advances in Hierarchical Inorganic Nanostructures for Efficient Solar Energy Harvesting Systems

The urgent need to address the global energy and environmental crisis necessitates the development of efficient solar-power harvesting systems. Among the promising candidates, hierarchical inorganic nanostructures stand out due to their exceptional attributes, including a high specific surface area, abundant active sites, and tunable optoelectronic properties. In this comprehensive review, we delve into the fundamental principles underlying various solar energy harvesting technologies, including dye-sensitized solar cells (DSSCs), photocatalytic, photoelectrocatalytic (water splitting), and photothermal (water purification) systems, providing a foundational understanding of their operation. Thereafter, the discussion is focused on recent advancements in the synthesis, design, and development of hierarchical nanostructures composed of diverse inorganic material combinations, tailored for each of these solar energy harvesting systems. We meticulously elaborate on the distinct synthesis methods and conditions employed to fine-tune the morphological features of these hierarchical nanostructures. Furthermore, this review offers profound insights into critical aspects such as electron transfer mechanisms, band gap engineering, the creation of hetero-hybrid structures to optimize interface chemistry through diverse synthesis approaches, and precise adjustments of structural features. Beyond elucidating the scientific fundamentals, this review explores the large-scale applications of the aforementioned solar harvesting systems. Additionally, it addresses the existing challenges and outlines the prospects for achieving heightened solar-energy conversion efficiency.

Anionic Effect on Electrical Transport Properties of Solid Co2+/3+ Redox Mediators

In a solid-state dye-sensitized solar cell, a fast-ion conducting (σ25°C > 10-4 S cm-1) solid redox mediator (SRM; electrolyte) helps in fast dye regeneration and back-electron transfer inhibition. In this work, we synthesized solid Co2+/3+ redox mediators using a [(1 - x)succinonitrile: x poly(ethylene oxide)] matrix, LiX, Co(tris-2,2'-bipyridine)3(bis(trifluoromethyl) sulfonylimide)2, and Co(tris-2,2'-bipyridine)3(bis(trifluoromethyl) sulfonylimide)3 via the solution-cast method, and the results were compared with those of their acetonitrile-based liquid counterparts. The notation x is a weight fraction (=0, 0.5, and 1), and X represents an anion. The anion was either bis(trifluoromethyl) sulfonylimide [TFSI-; ionic size, 0.79 nm] or trifluoromethanesulfonate [Triflate-; ionic size, 0.44 nm]. The delocalized electrons and a low value of lattice energy for the anions made the lithium salts highly dissociable in the matrix. The electrolytes exhibited σ25°C ≈ 2.1 × 10-3 (1.5 × 10-3), 7.2 × 10-4 (3.1 × 10-4), and 9.7 × 10-7 (6.3 × 10-7) S cm-1 for x = 0, 0.5, and 1, respectively, with X = TFSI- (Triflate-) ions. The log σ-T-1 plot portrayed a linear curve for x = 0 and 1, and a downward curve for x = 0.5. The electrical transport study showed σ(TFSI-) > σ(Triflate-), with lower activation energy for TFSI- ions. The anionic effect increased from x = 0 to 1. This effect was explained using conventional techniques, such as Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), UV-visible spectroscopy (UV-vis), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA).

Effect of Mixture Composition on the Photophysics of Indoline Dyes in Imidazolium Ionic Liquid-Molecular Solvent Mixtures: A Femtosecond Transient Absorption Study

We conducted a study on the photophysics of three indoline dyes, D102, D149, and D205, in binary mixtures of ionic liquids (IL) and polar aprotic molecular solvents (MS). Specifically, we examined the behavior of these dyes in IL-MS mixtures containing four different imidazolium-based ILs and three different polar aprotic MSs. Our investigation involved several techniques, including stationary absorption and emission measurements, as well as femtosecond transient absorption (TA) spectroscopy. Through our analysis, we discovered a peculiar behavior of several photophysical properties at low IL mole fractions (0 < XIL < 0.2). Indeed, in this range of mixture composition, the absorption maximum wavelength decreases noticeably, while the emission maximum wavelength and the Stokes shift, expressed in wavenumbers, reach a maximum. while a minimum occurs in the relative quantum yield and the excited state lifetime. These results indicate that the solvation of dye undergoes a large change in this range of mixture composition. We found that, at high ionic liquid content, the excited relaxation times are correlated with the high viscosity, while at low content, it is the polarity of the solvent that influences the behavior of the excited relaxation times. At a mixture composition of around 0.10, the behavior of the photophysical properties of the studied IL-MS mixtures indicates a crossover between situations where the solvation is dominated by that of ions and that dominated by the solvent.

Effect of Position of Donor Units and Alkyl Groups on Dye-Sensitized Solar Cell Device Performance: Indoline-Aniline Donor-Based Visible Light Active Unsymmetrical Squaraine Dyes

Indoline (In) and aniline (An) donor-based visible light active unsymmetrical squaraine (SQ) dyes were synthesized for dye-sensitized solar cells (DSSCs), where the position of An and In units was changed with respect to the anchoring group (carboxylic acid) to have In-SQ-An-CO2H and An-SQ-In-CO2H sensitizers, AS1-AS5. Linear or branched alkyl groups were functionalized with the N atom of either In or An units to control the aggregation of the dyes on TiO2. AS1-AS5 exhibit an isomeric π-framework where the squaric acid unit is placed in the middle, where AS2 and AS5 dyes possess the anchoring group connected with the An donor, and AS1, AS3, and AS4 dyes having the anchoring group connected with the In donor. Hence, the conjugation between the middle squaric acid acceptor unit and the anchoring -CO2H group is short for AS2, AS5, and AK2 and longer for AS1, AS3, and AS4 dyes. AS dyes showed absorption between 501 and 535 nm with extinction coefficients of 1.46-1.61 × 105 M-1 cm-1. Further, the isomeric π-framework of An-SQ-In-CO2H and In-SQ-An-CO2H exhibited by means of changing the position of In and An units a bathochromic shift in the absorption properties of AS2 and AS5 compared to the AS1, AS3, and AS4 dyes. The DSSC device fabricated with the dyes contains short acceptor-anchoring group distance (AS2 and AS5) showed high photovoltaic performances compared to the dyes having longer distance (AS1, AS3, and AS4) with the iodolyte (I-/I3-) electrolyte. DSSC device efficiencies of 5.49, 6.34, 6.16, and 5.57% have been achieved for AS1, AS2, AS3, and AS4 dyes, respectively; without chenodeoxycholic acid (CDCA), small changes have been observed in the device performance of the AS dyes with CDCA. Significant changes have been noted in the DSSC parameters (open-circuit voltage VOC, short-circuit current JSC, fill factor ff, and efficiency η) for the AS5 dye while sensitized with CDCA and showed highest DSSC efficiency of 8.01% in the AS dye series. This study revealed the potential of shorter SQ acceptor-anchoring group distance over the longer one and the importance of alkyl groups on the overall DSSC device performance for the unsymmetrical squaraine dyes.

Screening novel candidates of ZL003-based organic dyes for dye-sensitized solar cells by modifying auxiliary electron acceptors: A theoretical study

In this work, a series of ZL003-based free-metal sensitizers with the donor-acceptor-π- conjugated spacer-acceptor (D-A-π-A) structure were designed by modifying auxiliary electron acceptors for the potential application in dye-sensitized solar cells. The energy levels of frontier molecular orbitals, absorption spectra, electronic transition, and photovoltaic parameters for all studied dyes were systematically evaluated using density functional theory (DFT)/time-dependent DFT calculations. Results illustrated that thienopyrazine (TPZ), selenadiazolopyridine (SDP), and thiadiazolopyridine (TDP) are excellent electron acceptors, and dye sensitizers functionalized by these acceptors have smaller HOMO-LUMO gaps, obviously red-shifted absorption bands and stronger light harvesting. The present study revealed that the photoelectric conversion efficiency (PCE) of ZL003 is around 13.42 % with a JSC of 20.21 mA·cm-2, VOC of 966 mV and FF of 0.688 under the AM 1.5G sun exposure, in good agreement with its experimental value (PCE = 13.6 ± 0.2 %, JSC = 20.73 ± 0.20 mA·cm-2, VOC = 956 ± 5 mV, and FF = 0.685 ± 0.005.). With the same procedure, the PCE values for M4, M6, and M7 were estimated to be as high as 19.93 %, 15.38 %, and 15.80 % respectively. Hence, these three dyes are expected to be highly efficient organic sensitizers applied in practical DSSCs.

Electrical transport properties of [(1 - x)succinonitrile:xpoly(ethylene oxide)]-LiCF3SO3-Co[tris-(2,2'-bipyridine)]3(TFSI)2-Co[tris-(2,2'-bipyridine)]3(TFSI)3 solid redox mediators

A solid redox mediator (solid electrolyte) with an electrical conductivity (σ25°C) greater than 10-4 S cm-1 is an essential requirement for a dye-sensitized solar cell in the harsh weather of Gulf countries. This paper reports the electrical properties of solid redox mediators prepared using highly dissociable ionic salts: Co[tris-(2,2'-bipyridine)]3(TFSI)2, Co[tris-(2,2'-bipyridine)]3(TFSI)3, and LiCF3SO3 as a source of Co2+, Co3+, and Li+ ions, respectively, in a solid matrix: [(1 - x)succinonitrile:xpoly(ethylene oxide)], where x = 0, 0.5, and 1 in weight fraction. In the presence of large size of cations (Co2+ and Co3+) and large-sized and weakly-coordinated anions (TFSI- and CF3SO3-), only the succinonitrile-poly(ethylene oxide) blend (x = 0.5) resulted in highly conductive amorphous regions with σ25°C of 4.7 × 10-4 S cm-1 for EO/Li+ = 108.4 and 3.1 × 10-4 S cm-1 for EO/Li+ = 216.8. These values are slightly lower than 1.5 × 10-3 S cm-1 for x = 0 and higher than 6.3 × 10-7 S cm-1 for x = 1. Only blend-based electrolytes exhibited a downward curve in the log σ-T-1 plot, a low value of pseudo-activation energy (0.06 eV), a high degree of transparency, and high thermal stability, making it useful for device applications.

Supramolecular gels - a panorama of low-molecular-weight gelators from ancient origins to next-generation technologies

Supramolecular gels, self-assembled from low-molecular-weight gelators (LMWGs), have a long history and a bright future. This review provides an overview of these materials, from their use in lubrication and personal care in the ancient world, through to next-generation technologies. In academic terms, colloid scientists in the 19th and early 20th centuries first understood such gels as being physically assembled as a result of weak interactions, combining a solid-like network having a degree of crystalline order with a highly mobile liquid-like phase. During the 20th century, industrial scientists began using these materials in new applications in the polymer, oil and food industries. The advent of supramolecular chemistry in the late 20th century, with its focus on non-covalent interactions and controlled self-assembly, saw the horizons for these materials shifted significantly beyond their historic rheological applications, expanding their potential. The ability to tune the LMWG chemical structure, manipulate hierarchical assembly, develop multi-component systems, and introduce new types of responsive and interactive behaviour, has been transformative. Furthermore, the dynamics of these materials are increasingly understood, creating metastable gels and transiently-fueled systems. New approaches to shaping and patterning gels are providing a unique opportunity for more sophisticated uses. These supramolecular advances are increasingly underpinning and informing next-generation applications - from drug delivery and regenerative medicine to environmental remediation and sustainable energy. In summary, this article presents a panorama over the field of supramolecular gels, emphasising how both academic and industrial scientists are building on the past, and engaging new fundamental insights and innovative concepts to open up exciting horizons for their future use.

A theoretical study on the role of the π-spacer in the thoughtful design of good light-absorbing dyes with phenothiazine for efficient dye-sensitized solar cells (DSSCs)

CONTEXT

In this work, we designed ten new organic phenothiazine dyes bridged by different πi-spacers (PTZ1-PTZ10) of D-π-A type based on the synthesized dye CC202-III for their efficacy in dye-sensitized solar cells (DSSC) applications. To learn how various π-spacers affect their performance in DSSCs, these isolated dyes and dye-cluster systems have had their geometries, electronic structures, absorption spectra, dipole moments, and molecular electrostatic potential examined and talked about. Additionally, a number of quantization parameters that affect power conversion efficiency (PCE), including light collection efficiency (LHE), reorganization energy (λtotal), vertical dipole moment (μnormal), strength electron injection driving force (ΔGinject), regeneration driving force (ΔGreg), excited state lifetime (τ), and open circuit voltage (VOC), were calculated in order to identify the organic dyes that would be best suited for DSSC applications. Calculated results revealed that the designed dyes PTZ3, PTZ4, PTZ5, and PTZ10 exhibit a lower energy gap among all dyes compared to the corresponding CC202-III. Additionally, PTZ3, PTZ4, PTZ5, PTZ7, PTZ8, PTZ9, and PTZ10 exhibit significant red-shifted absorption spectra compared to the other dyes with a larger oscillator strength, which improves the photocurrent density of the devices. The findings thus imply that bridge modification is a workable tactic to raise DSSC effectiveness.

METHOD

We used density functional theory (DFT) and time-dependent DFT (TD-DFT) methods to study the electronic and photovoltaic properties of the dyes designed (PTZ1-PTZ10) to assess their effectiveness in DSSCs. DFT and TD-DFT simulations are theoretically used to deeply analyze key characteristics of all organic dyes that affect open-circuit voltage (VOC) and short-circuit current (JSC) to identify structure-property relationships.

Molecular Engineering of Photosensitizers for Solid-State Dye-Sensitized Solar Cells: Recent Developments and Perspectives

Dye-sensitized solar cells (DSSCs) are a feasible alternative to traditional silicon-based solar cells because of their low cost, eco-friendliness, flexibility, and acceptable device efficiency. In recent years, solid-state DSSCs (ss-DSSCs) have garnered much interest as they can overcome the leakage and evaporation issues of liquid electrolyte systems. However, the poor morphology of solid electrolytes and their interface with photoanodes can minimize the device performance. The photosensitizer/dye is a critical component of ss-DSSCs and plays a vital role in the device's overall performance. In this review, we summarize recent developments and performance of photosensitizers, including mono- and co-sensitization of ruthenium, porphyrin, and metal-free organic dyes under 1 sun and ambient/artificial light conditions. We also discuss the various requirements that efficient photosensitizers should satisfy and provide an overview of their historical development over the years.

New Benzotrithiophene-Based Molecules as Organic P-Type Semiconductor for Small-Molecule Organic Solar Cells

A new benzotrithiophene-based small molecule, namely 2,5,8-Tris[5-(2,2-dicyanovinyl)-2-thienyl]-benzo[1,2-b:3,4-b':6,5-b″]-trithiophene (DCVT-BTT), was successfully synthesized and subsequently characterized. This compound was found to present an intense absorption band at a wavelength position of ∼544 nm and displayed potentially relevant optoelectronic properties for photovoltaic devices. Theoretical studies demonstrated an interesting behavior of charge transport as electron donor (hole-transporting) active material for heterojunction cells. A preliminary study of small-molecule organic solar cells based on DCVT-BTT (as the P-type organic semiconductor) and phenyl-C61-butyric acid methyl ester (as the N-type organic semiconductor) exhibited a power conversion efficiency of 2.04% at a donor: acceptor weight ratio of 1:1.

Biosynthesis, characterization and optimization of TiO2 nanoparticles by novel marine halophilic Halomonas sp. RAM2: application of natural dye-sensitized solar cells

BACKGROUND

Metal oxide nanoparticles (NPs) are becoming valuable due to their novel applications. The green synthesis of TiO2 NPs is more popular as a flexible and eco-friendly method compared to traditional chemical synthesis methods. TiO2 NPs are the most commonly used semiconductor in dye-sensitized solar cells (DSSCs).

RESULTS

The biogenic TiO2 NPs were produced extracellularly by the marine halophilic bacterium Halomonas sp. RAM2. Response surface methodology (RSM) was used to optimize the biosynthesis process, resulting in a starting TiO2 concentration of 0.031 M and a pH of 5 for 92 min (⁓15 nm). TiO2 NPs were well-characterized after the calcination process at different temperatures of 500, 600, 700 and 800 °C. Anatase TiO2 NPs (calcined at 500 °C) with a smaller surface area and a wider bandgap were nominated for use in natural dye-sensitized solar cells (NDSSCs). The natural dye used as a photosensitizer is a mixture of three carotenoids extracted from the marine bacterium Kocuria sp. RAM1. NDSSCs were evaluated under standard illumination. After optimization of the counter electrode, NDSSCBio(10) (10 layers) demonstrated the highest photoelectric conversion efficiency (η) of 0.44%, which was almost as good as NDSSCP25 (0.55%).

CONCLUSION

The obtained results confirmed the successful green synthesis of TiO2 NPs and suggested a novel use in combination with bacterial carotenoids in DSSC fabrication, which represents an initial step for further efficiency enhancement studies.

Functional Fiber Materials to Smart Fiber Devices

The development of fiber materials has accompanied the evolution of human civilization for centuries. Recent advances in materials science and chemistry offered fibers new applications with various functions, including energy harvesting, energy storing, displaying, health monitoring and treating, and computing. The unique one-dimensional shape of fiber devices endows them advantages to work as human-interfaced electronics due to the small size, lightweight, flexibility, and feasibility for integration into large-scale textile systems. In this review, we first present a discussion of the basics of fiber materials and the design principles of fiber devices, followed by a comprehensive analysis on recently developed fiber devices. Finally, we provide the current challenges facing this field and give an outlook on future research directions. With novel fiber devices and new applications continuing to be discovered after two decades of research, we envision that new fiber devices could have an important impact on our life in the near future.

D-A-D-based Unsymmetrical Thiosquaraine Dye for the Dye-Sensitized Solar Cells†

In dye-sensitized solar cell, modulating the electronic properties of the sensitizer by varying the donor, π-spacer, acceptor and anchoring groups help optimizing the structure of the dye for better device performance. Here, a donor-acceptor-donor-based unsymmetrical thiosquaraine sensitizer (SQ5S) has been designed and synthesized. Photophysical, electrochemical, theoretical and photovoltaic characterizations of SQ5S dye have been compared with its oxygen analog, SQ5. The incorporation of the sulfur atom in the acceptor unit of SQ5S dye showed an intense peak at 688 nm, which was 38 nm of red-shifted and showed the panchromatic light harvesting response with the onset of 850 nm compared with SQ5 dye. The LUMO and HOMO energy levels are well aligned with the conduction band of TiO₂ and the redox potential of electrolyte for the charge injection and the dye-regeneration processes, respectively. Photovoltaic efficiency of 1.51% (V_OC 610 mV, J_SC 3.07 mA cm^-2 , ff 81%) has been achieved for SQ5S dye, whereas SQ5 showed the device performance of 5.43% (V_OC 723 mV, J_SC 9.3 mA cm^-2 , ff 80%). The decreased device performance for the dye SQ5S has been attributed to the favorable intersystem crossing process associated with the photoexcited SQ5S that reduces the driving force for the charge injection process.

Triazine: An Important Building Block of Organic Materials for Solar Cell Application

Since the beginning of the 21st century, triazine-based molecules have been employed to construct different organic materials due to their unique optoelectronic properties. Among their applications, photovoltaics stands out because of the current need to develop efficient, economic, and green alternatives to energy generation based mainly on fossil fuels. Here, we review all the development of triazine-based organic materials for solar cell applications, including organic solar cells, dye-sensitized solar cells, and perovskite solar cells. Firstly, we attempt to illustrate the main synthetic routes to prepare triazine derivatives. Then, we introduce the main aspects associated with solar cells and their performance. Afterward, we discuss different works focused on the preparation, characterization, and evaluation of triazine derivatives in solar cells, distinguishing the type of photovoltaics and the role of the triazine-based material in their performance (e.g., as a donor, acceptor, hole-transporting material, electron-transporting material, among others). Throughout this review, the progress, drawbacks, and main issues of the performance of the mentioned solar cells are exposed and discussed. Finally, some conclusions and perspectives about this research topic are mentioned.

Solvent-Dependent Functional Aggregates of Unsymmetrical Squaraine Dyes on TiO2 Surface for Dye-Sensitized Solar Cells

Alkyl group wrapped donor-acceptor-donor (D-A-D) based unsymmetrical squaraine dyes SQ1, SQ5, and SQS4 were used to evaluate the effect of sensitizing solvents on dye-sensitized solar cell (DSSC) efficiency. A drastic change in DSSC efficiency was observed when the photo-anodes were sensitized in acetonitrile (bad solvent when considering dye solubility) and chloroform (good solvent) with an Iodolyte (I^-/I₃^-) electrolyte. The DSSC device sensitized with squaraine dyes in acetonitrile showed better photovoltaic performance with enhanced photocurrent generation and photovoltage compared to the device sensitized in chloroform. In a good sensitizing solvent, dyes with long hydrophobic alkyl chains are deleterious forming aggregates on the TiO₂ surface, which results in an incident photon-to-current conversion efficiency (IPCE) response mostly from monomeric and dimeric structures. Meanwhile, a bad sensitizing solvent facilitates the formation of well-packed self-assembled structures on the TiO₂ surface, which are responsible for a broad IPCE response and high device efficiencies. The photoanode sensitized in the bad sensitizing solvent showed enhanced V_OC values of 642, 675, and 699 mV; J_SC values of 6.38, 11.1, and 11.69 mA/cm²; and DSSC device efficiencies of 3.0, 5.63, and 6.13% for the SQ1, SQ5, and SQS4 dyes in the absence of a coadsorbent (chenodeoxycholic acid (CDCA)), respectively, which were further enhanced by CDCA addition. Meanwhile, the photoanode sensitized in the good sensitizing solvent showed relatively low photovoltaic V_OC values of 640, 652, and 650 mV; J_SC values of 5.78, 6.79, and 6.24 mA/cm²; and device efficiencies of 2.73, 3.35, and 3.20% for SQ1, SQ5, and SQS4 in the absence of CDCA, respectively, which were further varied with equivalents of CDCA. The best DSSC device efficiencies of 6.13 and 3.20% were obtained for SQS4 without CDCA, where the dye was sensitized in acetonitrile (bad) and chloroform (good) sensitizing solvents, respectively.

Titania Nanorods Embedded with 2-Bromo-3-(methylamino)naphthalene-1,4-dione for Dye-Sensitized Solar Cells

In a recent study, TiO2 nanorod electrodes were prepared by the hydrothermal approach followed by calcination at various temperatures from 300 to 600 °C. The effects of calcination temperature on the morphological and structural properties were investigated. The novel analogue of aminonaphthoquinone(2R-(n-alkylamino)-1,4-naphthoquinone) photosensitizer, viz. BrA1, 2-bromo-3-(methylamino)naphthalene-1,4-dione was synthesized from 2,3-dibromonaphthalene-1,4-dione. X-ray crystallographic data collection and refinement confirm that BrA1 crystallizes in the triclinic space group P 1̅. After loading BrA1, the photosensitizer on the annealed TiO2 nanorod (TiO2NR) electrodes, the optical properties of the photoanodes showed broadbands in each of the UV and visible regions, which are attributed to the π →π* and n → π* charge-transfer transitions, respectively. The dye-sensitized solar cell (DSSC) system was formed by loading the BrA1 photosensitizer on TiO2NR. The electrochemical impedance spectroscopy (EIS) analyses confirm that calcination temperature improves the charge transportation by lowering the resistance path during the photovoltaic process in TiO2NR (400 °C) photoanode-based DSSCs due to the sufficient photosensitizer adsorption and fast electron injection. Due to the effective light harvesting by the BrA1 photosensitizer and charge transport through the TiO2 nanorod, the power conversion efficiencies (PCE) of the TiO2NR (400 °C/BrA1-based) DSSCs were improved for 2-bromo-3-(methylamino)naphthalene-1,4-dione.

Efficient dye-sensitized solar cell fabricated using a less toxic alternative to electrolyte and charge collector

The photovoltaic investigation of novel and efficient dye-sensitized solar cells is discussed in this paper. Ruthenium-based synthetic dye (N3) is used as a sensitizer. A less toxic alternative is suggested for toxic indium-based glass substrates by using aluminum-doped zinc oxide (AZO) and fluorine-doped tin oxide (FTO) as charge collectors. Moreover, the electrolyte used is a mixture of polymer (polyaniline) and an iodide-triiodide couple to go for the approach involving a lower amount of iodine. In the paper study, on the extent of light, absorption of dye is done by ultraviolet-visible (UV-vis) spectroscopy. The morphological study of sheets is done using scanning electron microscopic (SEM) images to understand the binding of titania on photoanode. Photovoltaic characteristics (I-V) and induced photon to current efficiency (IPCE) measurements, and light harvesting efficiency (LHE) are also investigated. The highest power conversion efficiency of 6.18% is observed in the suggested fabricated green solar cell. Hence, more efficient, indium-free, and novel cell is fabricated by the usage of different charge collector substrates and quasi solid-state electrolytes.

Structural, Thermal, and Electrical Properties of Poly(Ethylene Oxide)-Tetramethyl Succinonitrile Blend for Redox Mediators

An all-solid−state dye-sensitized solar cell is one of the non-fossil fuel-based electrochemical devices for electricity generation in a high-temperature region. This device utilizes a redox mediator, which is a fast ion-conducting solid polymer electrolyte (SPE). The SPE makes the device economical, thinner, and safer in high-temperature regions. The SPE generally has a form of matrix−plasticizer−redox salts. Succinonitrile (SN) is generally employed as a plasticizer for reducing the crystallinity of poly(ethylene oxide), abbreviated as PEO, a common polymeric matrix. In the present paper, the structural and thermal properties of tetramethyl succinonitrile (TMSN) were compared with SN for its application as a solid plasticizer. TMSN and SN both are plastic crystals. TMSN has four methyl groups by replacing the hydrogen of the SN, resulting in higher molecular weight, solid−solid phase transition temperature, and melting temperature. We thoroughly studied the structural, thermal, and electrical properties of the [(1−x)PEO: xTMSN] blend for utilizing it as a matrix, where x = 0−0.25 in mole fraction. The FT-IR spectra and XRD patterns of the blends exhibited PEO-alike up to x = 0.15 mole and TMSN-alike for x > 0.15 mole. Differential scanning calorimetry revealed formation of a eutectic phase from x = 0.1 mole and phase separation from x = 0.15 mole. The blends with x = 0.1−0.15 mole had a low value of PEO crystallinity. Thermogravimetric analysis showed thermal stability of the blends up to 75 °C. The blends exhibited electrical conductivity, σ25°C more than 10−9 S cm−1, and Arrhenius behavior (activation energy, ~0.8 eV) in a temperature region, 25−50 °C.

Polyimide-Based Covalent Organic Framework as a Photocurrent Enhancer for Efficient Dye-Sensitized Solar Cells

Covalent organic frameworks (COFs) are of great interest in the energy and optoelectronic fields due to their high porosity, superior thermal stability, and highly ordered conjugated architecture, which are beneficial for charge migration, charge separation, and light harvesting. In this study, polyimide COFs (PI-COFs) are synthesized through the condensation reaction of pyromellitic dianhydride (PMDA) with tris(4-aminophenyl) amine (TAPA) and then doped in the TiO₂ photoelectrode of a dye-sensitized solar cell (DSSC) to co-work with N719 dye to explore their functionality. As a benchmark, the pristine DSSC without the doping of PI-COFs exhibits a power conversion efficiency of 9.05% under simulated one sun illumination. The doping of 0.04 wt % PI-COFs contributes an enhanced short-circuit current density (J_SC) from 17.43 to 19.03 mA/cm², and therefore, the cell efficiency is enhanced to 9.93%. The enhancement of J_SC is attributed to the bifunctionality of PI-COFs, which enhances the charge transfer/injection and suppresses the charge recombination through the host (PI-COF)-guest (N719 dye) interaction. In addition, the PI-COFs also function as a cosensitizer and contribute a small quantity of photoinduced electrons upon sunlight illumination. Surface modification of oxygen plasma improves the hydrophilicity of PI-COF particles and reinforces the heterogeneous linkage between PI-COF and TiO₂ nanoparticles, giving rise to more efficient charge injection. As a result, the champion cell exhibits a high power conversion efficiency of 10.46% with an enhanced J_SC of 19.43 mA/cm². This methodology of increasing solar efficiency by modification of the photoelectrode with the doping of PI-COFs in the TiO₂ nanoparticles is promising in the development of DSSCs.

Electrical Transport, Structural, Optical and Thermal Properties of [(1-x)Succinonitrile: xPEO]-LiTFSI-Co(bpy)3(TFSI)2-Co(bpy)3(TFSI)3 Solid Redox Mediators

The solar cell has been considered one of the safest modes for electricity generation. In a dye-sensitized solar cell, a commonly used iodide/triiodide redox mediator inhibits back-electron transfer reactions, regenerates dyes, and reduces triiodide into iodide. The use of iodide/triiodide redox, however, imposes several problems and hence needs to be replaced by alternative redox. This paper reports the first Co2+/Co3+ solid redox mediators, prepared using [(1−x)succinonitrile: xPEO] as a matrix and LiTFSI, Co(bpy)3(TFSI)2, and Co(bpy)3(TFSI)3 as sources of ions. The electrolytes are referred to as SN_E (x = 0), Blend 1_E (x = 0.5 with the ethereal oxygen of the PEO-to-lithium ion molar ratio (EO/Li+) of 113), Blend 2_E (x = 0.5; EO/Li+ = 226), and PEO_E (x = 1; EO/Li+ = 226), which achieved electrical conductivity of 2.1 × 10−3, 4.3 × 10−4, 7.2 × 10−4, and 9.7 × 10−7 S cm−1, respectively at 25 °C. Only the blend-based polymer electrolytes exhibited the Vogel-Tamman-Fulcher-type behavior (vitreous nature) with a required low pseudo-activation energy (0.05 eV), thermal stability up to 125 °C, and transparency in UV-A, visible, and near-infrared regions. FT-IR spectroscopy demonstrated the interaction between salt and matrix in the following order: SN_E < Blend 2_E < Blend 1_E << PEO_E. The results were compared with those of acetonitrile-based liquid electrolyte, ACN_E.

Photoexcited Intramolecular Charge Transfer in Dye Sensitizers: Predictive In Silico Screening for Dye-Sensitized Solar Cell Devices

Efficient photoinduced intramolecular charge transfer (ICT) from donor to acceptor in dye molecules is the functional basis and key property in the working of a dye-sensitized solar cell (DSSC). To understand the ICT process in photoexcited dye molecules, we analyze the electronic properties and structural parameters of a chosen set of experimentally synthesized donor-acceptor (D-A) and donor-π-spacer-acceptor (D-π-A) type dye molecules in their ground, excited, and cationic states. The correlation between structural modification and charge redistribution in different parts of the molecule helps to identify the extent of π-conjugation and spatial rearrangement of electron density localization along the molecular skeleton. We find that prominent twisting of several groups and the resulting molecular bond rearrangements in larger parts of the molecule promote efficient donor to acceptor ICT, such as in D-A type ADEKA1 and C275 dyes. Thus, based on the modest computation of structural and electronic properties of dye molecules in their respective ground, excited, and cationic states, we identify the desired structural changes that facilitate tunable intramolecular charge transfer to highlight a simple and direct prescription to screen out probable efficient dye molecules among many samples. Our approach complements recent experimental evidence of capturing the structural view of the excited-state charge transfer in molecules.

Novel 2D-AuSe nanostructures as effective platinum replacement counter electrodes in dye-sensitized solar cells

Studies to improve the efficiency of dye-sensitized solar cells (DSSCs) include, but are not limited to, finding alternatives such as 2D layered materials as replacement counter electrodes (CEs) to the commonly used Pt. Herein, we report for the first time, the use of AuSe as a counter electrode for the reduction of triiodide ions (I₃⁻) to iodide ions (I⁻). The colloidal synthesis of gold selenide nanostructures produced α-AuSe and β-AuSe dominated products as determined by XRD. Electron microscopy showed α-AuSe having belt-like structures while β-AuSe had a plate-like morphology. EDS mapping confirmed the elemental composition and homogeneity of the AuSe CEs. Cyclic voltammetry curves of the AuSe CEs displayed the double set of reduction–oxidation peaks associated with the reactions in the I₃⁻/I⁻ electrolyte and therefore were comparable to the Pt CV curve. The α-AuSe CE showed better electrocatalytic activity with a reduction current of 6.1 mA than that of β-AuSe and Pt CEs, which were 4.2 mA and 4.8 mA, respectively. The peak-to-peak separation (ΔE_pp) for the α-AuSe CE was also more favourable with a value of 532 mV over that of the β-AuSe CE of 739 mV however, both values were larger than that of the Pt CE, which was found to be 468 mV. The EIS and Tafel plot data showed that α-AuSe had the best catalytic activity compared to β-AuSe and was comparable to Pt. The DSSC using α-AuSe as a CE had the highest PCE (6.94%) as compared to Pt (4.89%) and β-AuSe (3.47%). The lower efficiency for Pt was attributed to the poorer fill factor. With these novel results, α-AuSe is an excellent candidate to be used as an alternative CE to Pt in DSSCs.

Studies to improve the efficiency of dye-sensitized solar cells (DSSCs) include, but are not limited to, finding alternatives such as 2D layered materials as replacement counter electrodes (CEs) to the commonly used Pt.

High-pressure transformation of dithiazolylidene-dithiazolium polyiodide with N-H…N hydrogen bond: A Raman Spectroscopy study

The insight into the behavior of polyiodides under non-ambient conditions can enrich the practical applications due to obtaining materials with adjustable and tunable conducting properties. In this work Raman spectroscopy study in the range 0 - 6.5 GPa has been performed for dithiazolylidene-dithiazolium zigzag polyiodide with N-H…N hydrogen bond. Variations of band positions in the low-wavenumber region of Raman spectra have been attributed to the changes in the anionic part of the unit cell. The association of different interacting polyiodide subunits at pressure above 1.5 GPa leads to the emergence of the bands at 98 and 115 cm^-1 due to consistent vibrations in the I₈^2- zigzag. The emergence of the band at 159 cm^-1 above 0.28 GPa can be assigned to N-H…N hydrogen bond vibration. The obtained results depict undergoing structure transformations: the stronger are cation…cation and anion…anion interactions the more likely is the observation of conducting properties due to the formation of polyiodide zigzag and strongly-bound hydrogen-bonded fragment.

Surface Structure of Alkyl/Fluoroalkylimidazolium Ionic-Liquid Mixtures

The gas-liquid interface of ionic liquids (ILs) is critically important in many applications, for example, in supported IL phase (SILP) catalysis. Methods to investigate the interfacial structure in these systems will allow their performance to be improved in a rational way. In this study, reactive-atom scattering (RAS), surface tension measurements, and molecular dynamics (MD) simulations were used to study the vacuum interface of mixtures of partially fluorinated and normal alkyl ILs. The underlying aim was to understand whether fluorinated IL ions could be used as additives to modify the surface structure of one of the most widely used families of alkyl ILs. The series of ILs 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C_nmim][Tf₂N]) with n = 4-12 were mixed with a fixed-length, semiperfluorinated analogue (1H,1H,2H,2H-perfluorooctyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₈mimF₁₃][Tf₂N]), forming [C_nmim]_(1-x)[C₈mimF₁₃]_x[Tf₂N] mixtures, where x is the bulk mole fraction of the fluorinated component. The RAS-LIF method combined O-atom projectiles with laser-induced fluorescence (LIF) detection of the product OH as a measure of surface exposure of the alkyl chains. For [C₈mim]_(1-x)[C₈mimF₁₃]_x[Tf₂N] mixtures, RAS-LIF OH yields are below those expected from stoichiometry. There are quantitatively consistent negative deviations from linearity of the surface tension. Both results imply that the lower-surface-tension fluoroalkyl material dominates the surface. A similar deficit is found for alkyl chain lengths n = 4, 6, 8, and 12 and for all (nonzero) x investigated by RAS-LIF. Accessible-surface-area (ASA) analyses of the MD simulations for [C_nmim]_(1-x)[C₈mimF₁₃]_x[Tf₂N] mixtures qualitatively reproduce the same primary effect of fluoro-chain predominance of the surface over most of the range of n. However, there are significant quantitative discrepancies between MD ASA predictions and experiment relating to the strength of any n-dependence of the relative alkyl coverage at fixed x, and on the x-dependence at fixed n. These discrepancies are discussed in the context of detailed examinations of the surface structures predicted in the MD simulations. Potential explanations, beyond experimental artifacts, include inadequacies in the classical force fields used in the MD simulations or the inability of simple ASA algorithms to capture dynamical factors that influence RAS-LIF yields.

Solar energy conversion using first row d-block metal coordination compound sensitizers and redox mediators

The use of renewable energy is essential for the future of the Earth, and solar photons are the ultimate source of energy to satisfy the ever-increasing global energy demands. Photoconversion using dye-sensitized solar cells (DSCs) is becoming an established technology to contribute to the sustainable energy market, and among state-of-the art DSCs are those which rely on ruthenium(ii) sensitizers and the triiodide/iodide (I3 -/I-) redox mediator. Ruthenium is a critical raw material, and in this review, we focus on the use of coordination complexes of the more abundant first row d-block metals, in particular copper, iron and zinc, as dyes in DSCs. A major challenge in these DSCs is an enhancement of their photoconversion efficiencies (PCEs) which currently lag significantly behind those containing ruthenium-based dyes. The redox mediator in a DSC is responsible for regenerating the ground state of the dye. Although the I3 -/I- couple has become an established redox shuttle, it has disadvantages: its redox potential limits the values of the open-circuit voltage (V OC) in the DSC and its use creates a corrosive chemical environment within the DSC which impacts upon the long-term stability of the cells. First row d-block metal coordination compounds, especially those containing cobalt, and copper, have come to the fore in the development of alternative redox mediators and we detail the progress in this field over the last decade, with particular attention to Cu2+/Cu+ redox mediators which, when coupled with appropriate dyes, have achieved V OC values in excess of 1000 mV. We also draw attention to aspects of the recyclability of DSCs.

Tetramethyl Succinonitrile as a Solid Plasticizer in a Poly(Ethylene Oxide)8 -LiI-I2 Solid Polymer Electrolyte

Dye-sensitized solar cell (DSSC) is a promising alternative to the commercially available amorphous silicon-based solar cell because of several advantageous properties. A DSSC with a fast ion conducting solid polymer electrolyte is required for the arid atmosphere of Gulf countries. In this work, we have proposed a new matrix, poly(ethylene oxide)-tetramethyl succinonitrile blend to synthesize a blend-LiI-I₂ solid polymer electrolyte for the DSSC application. The tetramethyl succinonitrile is a member of plastic crystal with a solid-solid phase transition temperature of approximately 71 °C and melting temperature of approximately 170.5 °C. Its molar fraction, 0.1-0.15 is sufficient enough for synthesizing a polymer electrolyte with electrical conductivity of more than 10^-4 S cm^-1 at room temperature. This electrolyte shows Vogel-Tamman-Fulcher type behavior with a low value (∼0.083 eV) of pseudo-activation energy for easy ion transport. The results of FT-IR spectroscopy, XRD, and DSC studies reveal the plasticizing effect of tetramethyl succinonitrile to form an amorphous phase. This electrolyte results in a ∼661% gain in J_SC and thereby a ∼552% gain in the cell efficiency (∼3.5%) with respect to the DSSC prepared with the tetramethyl succinonitrile-free electrolyte. This article is protected by copyright. All rights reserved.

Effect of a locust bean gum based gel electrolyte with nanocomposite additives on the performance of a dye-sensitized solar cell

In this study, we proposed Mn3O4 and Mn3O4·CuS nanocomposites as novel inorganic additives in locust bean gum (LBG) gel electrolytes for application in an aqueous dye-sensitized solar cell (DSSC).

Assembly of Polyiodide Networks with Cu(II) Complexes of Pyridinol-Based Tetraaza Macrocycles

Polyiodide networks are currently of great practical interest for the preparation of new electronic materials. The participation of metals in the formation of these networks is believed to improve their mechanical performance and thermal stability. Here we report the results on the construction of polyiodide networks obtained using Cu(II) complexes of a series of pyridinol-based tetraazacyclophanes as countercations. The assembly of these crystalline polyiodides takes place from aqueous solutions on the basis of similar structural elements, the [CuL]²⁺ and [Cu(H_–1L)]⁺ (L = L2, L2-Me, L2-Me₃) complex cations, so that the peculiarities induced by the increase of N-methylation of ligands, the structural variable of ligands, can be highlighted. First, solution equilibria involving ligands and complexes were analyzed (potentiometry, NMR, UV–vis, ITC). Then, the appropriate conditions could be selected to prepare polyiodides based on the above complex cations. Single-crystal XRD analysis showed that the coordination of pyridinol units to two metal ions is a prime feature of these ligands, leading to polymeric coordination chains of general formula {[Cu(H_–1L)]}_nⁿ⁺ (L = L2-Me, L2-Me₃). In the presence of the I^–/I₂ couple, the polymerization tendency stops with the formation of [(CuL)(CuH_–1L)]³⁺ (L = L2-Me, L2-Me₃) dimers which are surrounded by polyiodide networks. Moreover, coordination of the pyridinol group to two metal ions transforms the surface charge of the ring from negative to markedly positive, generating a suitable environment for the assembly of polyiodide anions, while N-methylation shifts the directional control of the assembly from H-bonds to I···I interactions. In fact, an extended concatenation of iodine atoms occurs around the complex dimeric cations, the supramolecular I···I interactions become shorter and shorter, fading into stronger forces dominated by the orbital overlap, which is promising for effective electronic materials.

Polyiodides with high iodine density are generated by Cu(II) complexes of pyridinol-based tetraazacyclophanes. Direct coordination of iodine atoms to Cu(II), anion−π interactions with electron-poor aromatic surfaces, and shift of the directional control of assembly from H-bonds to I···I interactions, governed by N-methylation, are the main elements leading to enhanced iodine chaining and strengthening of I···I contacts.

Recent Investigations on Thiocyanate-Free Ruthenium(II) 2,2'-Bipyridyl Complexes for Dye-Sensitized Solar Cells

Three decades ago, dye-sensitized solar cells (DSSCs) emerged as a method for harnessing the energy of the sun and for converting it into electricity. Since then, a lot of work has been devoted to create better global photovoltaic efficiencies and long term stability. Among photosensitizers for DSSCs, thiocyanate-free ruthenium(II) complexes have gained increasing interest due to their better stability compared to conventional thiocyanate-based complexes, such as benchmark dyes N719 and Z907. In this mini-review, two classes of thiocyanate-free Ru(II) complexes are presented: (a) bis-bipyridyl compounds bearing an ancillary cyclometalating bidentate ligand; (b) bipyridyl compounds bearing non-cyclometalating ancillary ligands. The coverage, mainly from 2014 up to now, is not exhaustive, but illustrates the most recent design strategies and photovoltaic properties of these two families of ruthenium(II) dyes.

Tumor Cell Distinguishable Nanomedicine Integrating Chemotherapeutic Sensitization and Protection

Theoretically, with a high enough drug dosage, cancer cells could be eliminated. However, the dosages that can be administered are limited by the therapeutic efficacy and side effects of the given drug. Herein, a nanomedicine integrating chemotherapeutic sensitization and protection was developed to relieve the limitation of administration dosage and to improve the efficacy of chemotherapy. The nanomedicine was endowed with the function of synergistically controlled release of CO and drugs under near-infrared (NIR) light irradiation. CO photo-induced release system (COPIRS) was synthesized by constructing an electron excitation–electron transfer group–electron-induced CO release structure and was used as the hydrophobic part, and then hydrophilic polymer (polyethylene glycol; PEG) was introduced by a thermal-responsive groups (DA group), forming a near-infrared-induced burst-release nanocarrier. In vitro and in vivo experiments showed that the nanomedicine can distinguish between tumor and normal cells and regulates the resistance of these different cells through the controlled release of carbonic oxide (CO), simultaneously enhancing the efficacy of chemotherapy drugs on tumor cells and chemotherapeutic protection on normal cells. This strategy could solve the current limitations on dosages due to toxicity and provide a solution for tumor cure by chemotherapy.