Structural Aspects of Stereodifferentiation in the Solid State

Insight of Employing Molecular Junctions for Sensor Applications

Molecular junctions (MJs) exhibit distinct charge transport properties and have the potential to become the next generation of electronic devices. Advancing molecular electronics for practical uses, such as sensors, is crucial to propel its progress to the next level. In this review, we discussed how MJs can serve as a sensor for detecting a wide range of analytes with exceptional sensitivity and specificity. The primary advances and potential of molecular junctions for the various kinds of sensors including photosensors, explosives (DNTs, TNTs), cancer biomarker detection (DNA, mRNA), COVID detection, biogases (CO, NO, NH), environmental pH, practical chemicals, and water pollutants are listed and examined here. The fundamental ideas of molecular junction formation as well as the sensing mechanism have been examined here. This review demonstrates that MJ-based sensors hold significant promise for real-time and on-site detection. It provides valuable insights into current research and outlines potential future directions for advancing molecular junction-based sensors for practical applications.

Theoretical Investigations on Free Energy of Binding Cilostazol with Different Cyclodextrins as Complex for Selective PDE3 Inhibition

Cilostazol is a phosphodiesterase III inhibitor characterized by poor solubility. This limitation can be overcome by using a drug carrier capable of delivering the drug to the target site. Cyclodextrins are essential as drug carriers because of their outstanding complexation abilities and their capacity to improve drug bioavailability. This study comprises two stages: The first involves verifying different cyclodextrins and their complexation abilities towards cilostazol. This was accomplished using molecular docking simulations (MDS) and density functional theory (DFT). Both techniques indicate that the largest Sulfobutyl Ether-β-Cyclodextrin forms the most stable complex with cilostazol. Additionally, other important parameters of the complex are described, including binding sites, dominant interactions, and thermodynamic parameters such as complexation enthalpy, Gibbs free energy, and Gibbs free energy of solvation. The second stage involves a binding study between cilostazol and Phosphodiesterse3 (PDE3). This study was conducted using molecular docking simulations, and the most important energetic parameters are detailed. This is the first such report, and we believe that the results of our predictions will pave the way for future drug development efforts using cyclodextrin-cilostazol complexes as potential therapeutics.

Easy and Effective Method for α-CD:N2O Host-Guest Complex Formation

α-CD:N2O "host-guest" type complexes were formed by a simple solid-gas reaction (N2O sorption into α-CD) under different gas pressures and temperatures. The new N2O inclusion method applied in the present study was compared with the already known technique based on the crystallization of clathrates from a water solution of α-CD saturated with N2O. A maximum storage capacity of 4.5 wt.% N2O was achieved when charging the cyclodextrin from a gas phase. The amount of included gas decreases to 1.3 wt.% when the complex is stored in air at 1 atm and room temperature, analogous to that achieved by the crystallization of α-CD:N2O. Furthermore, it was shown that the external coordination of N2O to either the upper or lower rim of α-CD without hydration water displacement is the preferred mode of binding, due to hydrogen bonds with neighboring -OH groups from the host macrocycle and three of the hydration water molecules nearby. The capacity of α-CD to store N2O and the thermal stability of the α-CD:N2O complex demonstrated promising applications of these types of complexes in food and beverages.

Preparation and temperature-controlled morphology of helical microrods composed of supramolecular α-cyclodextrin assemblies

Significant efforts have been devoted so far to artificially fabricate supramolecular helical nano- and microstructures through the regulated assembly of biological and synthetic building blocks. However, the preparation of supramolecular helical structures with a regulated morphology remains challenging. Here, helical microrods composed of supramolecular α-cyclodextrin (α-CD) assemblies were fabricated by allowing an α-CD/1,1,1,3,3,3-hexafluoro-2-propanol (HFIP)/2-pentanol mixture to stand at 30-60 °C under high humidity conditions. The morphology could be controlled by temperature to produce helical microrods with a regulated pitch and length. These helical rods can be applied as optical devices, chiral separation devices and asymmetric catalysts.

Preparation of aromatic β-cyclodextrin nano/microcapsules and corresponding aromatic textiles: A review

Fragrance finishing of textiles is receiving substantial interest, with aromatherapy being one of the most popular aspects of personal health care. However, the longevity of aroma on textiles and presence after subsequent launderings are major concerns for aromatic textiles directly loaded with essential oils. These drawbacks can be weakened by incorporating essential oil-complexed β-cyclodextrins (β-CDs) onto various textiles. This article reviews various preparation methods of aromatic β-cyclodextrin nano/microcapsules, as well as a wide variety of methods for the preparation of aromatic textiles based on them before and after forming, proposing future trends in preparation processes. The review also covers the complexation of β-CDs with essential oils, and the application of aromatic textiles based on β-CD nano/microcapsules. Systematic research on the preparation of aromatic textiles facilitates the realization of green and simple industrialized large-scale production, providing needed application potential in the fields of various functional materials.

N-Embedded Cubarene: A Quadrangular Member of the Macrocycle Family

Despite the large number of synthetic macrocycles, the cubarenes, the quadrangular-shaped macrocyclic arenes, remain less investigated, possibly due either to synthetic challenges or to the lack of suitable building blocks. In this paper, a N-embedded cubarene (cub[4]indolocarbazole) is facilely synthesized by FeCl₃·6H₂O-catalyzed cyclization in dichloromethane. The endo cavity of cub[4]indolocarbazole can bury quaternary ammonium salts in an intramolecular manner, whereas the intermolecular interaction between its exo walls with Cu²⁺ generates two-dimensional supramolecular tessellation.

Drug-Loaded Nanocarriers Composed of Cholesteryl Oleate Crystal Cores and Multiple-Nanosheet Shells of γ-Cyclodextrin Inclusion Complex Crystals

In this study, we prepared drug-loaded nanocarriers made of cholesteryl oleate (ChO) and γ-cyclodextrin (γ-CD). A nanosuspension (nanosuspension-I, NS-I) containing nanoparticles with a mean size of approximately 170 nm was obtained through the solvent-diffusion method using ethanol. A second nanosuspension (nanosuspension-II, NS-II), which was prepared by freeze-drying and redispersion of NS-I, exhibited an increased particle size of approximately 210 nm. Cryogenic transmission electron microscopy (cryo-TEM) and atomic force microscopy (AFM) force-distance curves indicated that the nanoparticles in NS-I were oblong and soft. However, those in NS-II were angular and stiff, and, interestingly, multiple nanosheets covered the solid-liquid interface. Synchrotron wide-angle X-ray diffraction (WAXD) analysis of NS-II indicated that the nanoparticles in it had a core-shell structure, where the ChO crystal in the inner core was covered by multiple nanosheets of ChO/γ-CD inclusion complex crystals. The X-ray peak analysis suggested that the γ-CD columns of the nanosheets were vertically stacked onto the ChO crystal interface. It was found that the nanosheets on the nanoparticle interface were formed during the freezing process. A model drug carbamazepine (CBZ) was loaded into the ChO/γ-CD nanoparticles by pre-dissolving CBZ in ethanol during the solvent-diffusion process. Cryo-TEM, ¹H NMR, ζ-potentials, and synchrotron WAXD indicated that CBZ was unexpectedly loaded into the shell as a CBZ/γ-CD inclusion complex crystalline nanosheet. The specific nanosheet structure, where ChO and CBZ coexisted in the same crystal of γ-CD, could achieve CBZ loading in the nanoparticles. ChO/γ-CD nanoparticles with the unique core-shell structure are expected to perform as practical carriers for drug delivery.

2-O-Methylated β-Cyclodextrin as an Effective Building Block to Construct Supramolecular Assemblies with Various Morphologies and Molecular Arrangements

The preparation of supramolecular cyclodextrin (CD) assemblies and control of their assembly mode through guest inclusion in CD cavities have been actively studied. Contrarily, there are limited reports on the control of the assembly mode of guest-free CD molecules by external stimuli. Herein, we report the use of 2-O-methylated β-cyclodextrin (2-Me-β-CD) as an effective building block in fabricating supramolecular assemblies with diverse morphologies and molecular arrangements through assembly mode control by various stimuli, such as temperature and solvent. When methanol and diethyl carbonate were used as good and poor solvents, respectively, 2-Me-β-CD formed an amorphous assembly through solvent evaporation on a polyethylene terephthalate (PET) substrate. Increasing the drying temperature and using crystalline substrates, such as highly oriented pyrolytic graphite (HOPG) and sapphire, changed the assembly mode of 2-Me-β-CD to a head-to-tail channel assembly. However, when a 2-Me-β-CD/1-propanol solution was mixed with linear alkanes as a poor solvent, 2-Me-β-CD with head-to-head channel assembly was formed as a precipitate. Additionally, when the corresponding cyclic alkane was used as an alternative poor solvent, an organogel composed of 2-Me-β-CD with head-to-head channel assemblies was obtained. The organogel obtained became a precipitate composed of 2-Me-β-CD with cage-type assembly upon heating at 50 °C. Among the supramolecular assemblies fabricated in this study, the head-to-tail channel assembly is a rare molecular assembly of β-CD and its derivatives. It possesses a modified columnar cavity that has potential applications in molecular recognition and sensing.

Highly Regulated Supramolecular Assembly of 2-O-Methylated α-Cyclodextrin to Construct Vertically Oriented Microrods on Graphite

Precisely controlling self-assembled molecules to fabricate highly ordered nano/microstructures is a challenging task. Here, a simple precipitation technique with common solvents forms supramolecular microstructures with highly regulated molecular arrangements from a methylated derivative of α-cyclodextrin at the 2-O position (2-Me-α-CD). The formation of a head-to-tail channel assembly of 2-Me-α-CD through host-guest complexation with a solvent molecule such as benzene or cyclohexane yields well-defined hexagonal microrods. Specifically, the self-assembly of 2-Me-α-CD forms vertically aligned hexagonal microrods on a highly ordered pyrolytic graphite (HOPG) surface via epitaxial growth. This work should provide insight into the design of supramolecular building blocks for controlled self-assembly.

A guanidino-γ-cyclodextrin superdimer generates a twin receptor for phosphate dimers assembled by anti-electrostatic hydrogen bonds

Octakis-6-guadinidino-γ-cyclodextrin (gguan) hydrochloride in the presence of phosphates crystallises from aqueous solution in the unprecedented form of a superdimer (dimer-within-a-dimer). The self-assembly exposes four circular octa-guanidinium regions that bind and stabilise discrete H-bonded phosphate anion dimers. The small (∼2 nm) gguan-phosphate assembly is preorganised and stable in aqueous solution, as demonstrated by DLS and NMR experiments.

Preparation, Characterization, and Bioavailability of Host-Guest Inclusion Complex of Ginsenoside Re with Gamma-Cyclodextrin

This work aimed at improving the water solubility of Ginsenoside (G)-Re by forming an inclusion complex. The solubility parameters of G-Re in alpha (α), beta (β), and gamma (γ) cyclodextrin (CD) were investigated. The phase solubility profiles were all classified as AL-type that indicated the 1:1 stoichiometric relationship with the stability constants Ks which were 22 M⁻¹ (α-CD), 612 M⁻¹ (β-CD), and 14,410 M⁻¹ (γ-CD), respectively. Molecular docking studies confirmed the results of phase solubility with the binding energy of −4.7 (α-CD), −5.10 (β-CD), and −6.70 (γ-CD) kcal/mol, respectively. The inclusion complex (IC) of G-Re was prepared with γ-CD via the water-stirring method followed by freeze-drying. The successful preparation of IC was confirmed by powder X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). In-vivo absorption studies were carried out by LC-MS/MS. Dissolution rate of G-Re was increased 9.27 times after inclusion, and the peak blood concentration was 2.7-fold higher than that of pure G-Re powder. The relative bioavailability calculated from the ratio of Area under the curve AUC₀–_∞ of the inclusion to pure G-Re powder was 171%. This study offers the first report that describes G-Re’s inclusion into γ-CD, and explored the inclusion complex’s mechanism at the molecular level. The results indicated that the solubility could be significantly improved as well as the bioavailability, implying γ-CD was a very suitable inclusion host for complex preparation of G-Re.

Self-assembly of cyclic grafted copolymers with rigid rings and their potential as drug nanocarriers

Enhancing the performance of polymer micelles by purposeful regulation of their structures is a challenging topic that receives widespread attention. In this study, we systematically conduct a comparative study between cyclic grafted copolymers with rigid and flexible rings in the self-assembly behavior via dissipative particle dynamics (DPD) simulation. With a focus on the possible stacking ways of rigid rings, we propose the energy-driven packing mechanism of cyclic grafted copolymers with rigid rings. For cyclic grafted copolymers with large ring size (14 and 21-membered rings), rigid rings present a novel channel-layer-combination layout, which is determined by the balance between the potential energy of micelles (E_micelle) and the interaction energy between water and micelles (E_int). Based on this mechanism, we further regulate a series of complex self-assembling structures, including curved rod-like, T-shape, annular and helical micelles. Compared with flexible copolymers, cyclic grafted copolymers with rigid rings provide a larger and loose hydrophobic core and higher structural stability with micelles due to the unique packing way of rigid rings. Therefore, their micelles have a great potential as drug nanocarriers. They possess a better drug loading capacity and disassemble more quickly than flexible counterparts under acidic tumor microenvironment. Furthermore, the endocytosis kinetics of rigid micelles is faster than the flexible counterparts for the adsorption and wrapping process. This study may provide a reasonable idea of structural design for polymer micelles to enhance their performance in biomedical applications.

A single-molecule electrical approach for amino acid detection and chirality recognition

One of the ultimate goals of analytic chemistry is to efficiently discriminate between amino acids. Here we demonstrate this ability using a single-molecule electrical methodology based on molecular nanocircuits formed from stable graphene-molecule-graphene single-molecule junctions. These molecular junctions are fabricated by covalently bonding a molecular machine featuring a permethylated-β-cyclodextrin between a pair of graphene point contacts. Using pH to vary the type and charge of the amino acids, we find distinct multimodal current fluctuations originating from the different host-guest interactions, consistent with theoretical calculations. These conductance data produce characteristic dwell times and shuttling rates for each amino acid, and allow accurate, statistical real-time, in situ measurements. Testing four amino acids and their enantiomers shows the ability to distinguish between them within a few microseconds, thus paving a facile and precise way to amino acid identification and even single-molecule protein sequencing.

Synthetic heme protein models that function in aqueous solution

Supramolecular porphyrin–cyclodextrin complexes act as biomimetic heme protein models in aqueous solution.

Study of Flavonoid/Hydroxypropyl-β-Cyclodextrin Inclusion Complexes by UV-Vis, FT-IR, DSC, and X-Ray Diffraction Analysis

The objective of this study was to investigate characterization of inclusion complexes of flavonoids with hydroxypropyl-β-cyclodextrin (HP-β-CD). The inclusion complexes of flavonoids with HP-β-CD was prepared by the freeze-drying method and its characterization was investigated by different analytical techniques including ultraviolet-visible spectroscopy, Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry, and X-ray diffractometry. The catechin/HP-β-CD complex exhibited the highest encapsulation efficiency (83.37%), followed by epicatechin/HP-β-CD (81.51%), morin hydrate/HP-β-CD (81.38%), and quercetin/HP-β-CD (81.16%). The inclusion complexes of HP-β-CD showed a decrease in the absorption of flavonoids with a small shift (≈2 nm) of the λ_max, while similar to the characteristic absorption peak of flavonoids. However, the FT-IR spectra of the flavonoid/HP-β-CD inclusion complexes did not display any features that were like the pure flavonoids, although the spectra were very similar to that of HP-β-CD. The melting point of flavonoids disappeared, and the thermal properties of HP-β-CD were altered following formation of the inclusion complex between flavonoids and HP-β-CD, resulting in a shift in the melting peak.

Macrocyclic Dinuclear Palladium Complex as a Novel Doubly Threaded [3]Rotaxane Scaffold and Its Application as a Rotaxane Cross-Linker

A dinuclear Pd^II complex possessing a cyclic ligand was developed as a novel doubly threaded [3]rotaxane scaffold and applied as a rotaxane cross-linker reagent. The dinuclear complex (PdMC)₂ was prepared by one-step macrocyclization followed by the double palladation reaction. ¹ H NMR analysis and UV/Vis measurements revealed the formation of a doubly threaded pseudo[3]rotaxane by the complexation of (PdMC)₂ with 2 equivalents of 2,6-disubstituted pyridine 3 through double metal coordination. The treatment of (PdMC)₂ with 2 equivalents of 4-vinylpyridine (VP) afforded a doubly threaded [3]rotaxane cross-linker (PdMC-VP)₂ . Radical co-polymerization of VP and t-butylstyrene in the presence of (PdMC-VP)₂ afforded a stable rotaxane cross-linked polymer (RCP). An elastic RCP was also prepared by using n-butyl acrylate as a monomer. The obtained RCPs exhibited higher swelling ability and higher mechanical toughness compared with the corresponding covalent cross-linked polymers.

The Role of β-Cyclodextrin in the Textile Industry-Review

β-Cyclodextrin (β-CD) is an oligosaccharide composed of seven units of D-(+)-glucopyranose joined by α-1,4 bonds, which is obtained from starch. Its singular trunk conical shape organization, with a well-defined cavity, provides an adequate environment for several types of molecules to be included. Complexation changes the properties of the guest molecules and can increase their stability and bioavailability, protecting against degradation, and reducing their volatility. Thanks to its versatility, biocompatibility, and biodegradability, β-CD is widespread in many research and industrial applications. In this review, we summarize the role of β-CD and its derivatives in the textile industry. First, we present some general physicochemical characteristics, followed by its application in the areas of dyeing, finishing, and wastewater treatment. The review covers the role of β-CD as an auxiliary agent in dyeing, and as a matrix for dye adsorption until chemical modifications are applied as a finishing agent. Finally, new perspectives about its use in textiles, such as in smart materials for microbial control, are presented.

Synergetic effects in the enantiodifferentiating photocyclodimerization of 2-anthracenecarboxylic acid mediated by β-cyclodextrin-pillar[5]arene-hybridized hosts

Tri-cavity hosts consisting of one pillar[5]arene (P5) sandwiched by two β-cyclodextrins (CDs) were synthesized, and their diastereoseparation was successfully accomplished. Photocyclodimerization of 2-anthracenecarboxylate with these hybrid hosts demonstrated the critical dependence of stereoselectivity on the absolute configuration of the central P5 and the conjugating positions on the β-CD, and gave the non-classical HT photodimers in up to 87% ee.

An Ultimate Stereocontrol in Supramolecular Photochirogenesis: Photocyclodimerization of 2-Anthracenecarboxylate Mediated by Sulfur-Linked β-Cyclodextrin Dimers

Stereoisomeric β-cyclodextrin (CD) dimers linked with a sulfur atom or an arene spacer were designed to create a tethered dual CD capsule for precisely manipulating the regio- and enantioselectivities of the photocyclodimerization of 2-anthracenecarboxylate (AC) to four stereoisomeric classical 9,10:9',10'-cyclodimers and two nonclassical 5,8:9',10'-cyclodimers. Among the dimeric CD hosts prepared, exo-3-thia-β-CD dimer formed 1:1 and 1:2 host-guest complexes with AC in aqueous solutions, the former of which hindered but the latter facilitated the AC photocyclodimerization with regio- and enantioselectivities much higher than those obtained with native β-CD or the rest of the β-CD dimers. The stereochemical outcomes turned out to be highly sensitive to and hence critically manipulable by the linking position and configuration of the connected saccharide units and the linker length, as well as the external variants, such as temperature, pH, and added salt. Eventually, the photocyclodimerization of AC mediated by the dimeric β-CD host gave enantiopure syn-head-to-tail-9,10:9',10'-cyclodimer in 97-98% yield in a pH 5.1 buffer solution at 0.5 °C and also in an aqueous CsCl solution at -20 °C.

Carbohydrate-based nanomaterials for biomedical applications

Carbohydrates are abundant biomolecules, with a strong tendency to form supramolecular networks. A host of carbohydrate-based nanomaterials have been exploited for biomedical applications. These structures are based on simple mono- or disaccharides, as well as on complex, polymeric systems. Chemical modifications serve to tune the shapes and properties of these materials. In particular, carbohydrate-based nanoparticles and nanogels were used for drug delivery, imaging, and tissue engineering applications. Due to the reversible nature of the assembly, often based on a combination of hydrogen bonding and hydrophobic interactions, carbohydrate-based materials are valuable substrates for the creations of responsive systems. Herein, we review the current research on carbohydrate-based nanomaterials, with a particular focus on carbohydrate assembly. We will discuss how these systems are formed and how their properties are tuned. Particular emphasis will be placed on the use of carbohydrates for biomedical applications. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Reversible Ion-Conducting Switch in a Novel Single-Ion Supramolecular Hydrogel Enabled by Photoresponsive Host-Guest Molecular Recognition

A novel ion-conducting supramolecular hydrogel with reversible photoconductive properties in which the azobenzene motif, α-cyclodextrin (α-CD), and ionic liquid are grafted onto the gel matrix is reported. Host-guest interactions with different association constants between α-CD and azobenzene or the anionic part of the ionic liquid can be readily tuned by photoinduced trans-cis isomerization of the azobenzene unit. When irradiated by 365 nm light, α-CD prefers to form a complex with the anionic part of the ionic liquid, resulting in decreased ionic mobility and thus high resistance of the hydrogel. However, under 420 nm light irradiation, a more stable complex is again formed between α-CD and trans-azobenzene, thereby releasing the bound anions to regenerate the low-resistive hydrogel. As such, remote control of the ionic conductivity of the hydrogel is realized by simple host-guest chemistry. With the incorporation of a logic gate, this hydrogel is able to reversibly switch an electric circuit on and off by light irradiation with certain wavelengths. The concept of photoswitchable ionic conductivity of a hydrogel mediated by competitive molecular recognition is potentially promising toward the fabrication of optoelectronic devices and applications in bioelectronic technology.

Host-Guest Complexation Using Pillar[5]arene Crystals: Crystal-Structure Dependent Uptake, Release, and Molecular Dynamics of an Alkane Guest

Host-guest complexation has been mainly investigated in solution, and it is unclear how guest molecules access the assembled structures of host and dynamics of guest molecules in the crystal state. In this study, we studied the uptake, release, and molecular dynamics of n-hexane vapor in the crystal state of pillar[5]arenes bearing different substituents. Pillar[5]arene bearing 10 ethyl groups yielded a crystal structure of herringbone-type 1:1 complexes with n-hexane, whereas pillar[5]arene with 10 allyl groups formed 1:1 complexes featuring a one-dimensional (1D) channel structure. For pillar[5]arene bearing 10 benzyl groups, one molecule of n-hexane was located in the cavity of pillar[5]arene, and another n-hexane molecule was located outside of the cavity between two pillar[5]arenes. The substituent-dependent differences in molecular arrangement influenced the uptake, release, and molecular dynamics of the n-hexane guest. The substituent effects were not observed in host-guest chemistry in solution, and these features are unique for the crystal state host-guest chemistry of pillar[5]arenes.

[Design Features in the Molecular-level Development of Solid Pharmaceutical Formulations Based on Supramolecular Structures]

We focused on the crystal structure of cyclodextrin (CD) to develop new solid CD complexes. There are two large spaces in the columnar structure of CD crystals: one inside a CD cavity and another between CD columns. New solid CD complexes can be designed by incorporating guest drugs between the CD columns. We succeeded in preparing a solid drug/[polyethylene glycol (PEG)/γ-CD-polypseudoraxane (PPRX)] complex by a sealed-heating method via the gas phase. A drug/(PEG/γ-CD-PPRX) complex has a structure in which PEGs are included in a γ-CD cavity, and guest drugs are incorporated between the γ-CD columns. Screening by a sealed-heating method determined that a variety of guest drugs with varying molecular size and log P could be incorporated into the spaces between γ-CD columns, following a stoichiometric rule. Another method, via solid phase using cogrinding and subsequent heating, was developed to prepare drug/(PEG/γ-CD-PPRX) complex. This method enabled us to prepare the complex with a thermally unstable drug, as well as a drug/(PEG/α-CD-PPRX) complex not formed using the sealed-heating method. Both the structure and molecular state of each drug in the complexes were characterized by powder X-ray diffraction and solid-state NMR measurements. The dissolution character and thermal stability of the drug incorporated in the complex could be improved by the specific complex formation. The solid CD complexes thus developed have potential for drug-encapsulation and as drug-release carriers, owing to their unique structural and pharmaceutical properties.

Electrospinning of Cyclodextrin Functional Nanofibers for Drug Delivery Applications

Electrospun nanofibers have sparked tremendous attention in drug delivery since they can offer high specific surface area, tailored release of drugs, controlled surface chemistry for preferred protein adsorption, and tunable porosity. Several functional motifs were incorporated into electrospun nanofibers to greatly expand their drug loading capacity or to provide the sustained release of the embedded drug molecules. In this regard, cyclodextrins (CyD) are considered as ideal drug carrier molecules as they are natural, edible, and biocompatible compounds with a truncated cone-shape with a relatively hydrophobic cavity interior for complexation with hydrophobic drugs and a hydrophilic exterior to increase the water-solubility of drugs. Further, the formation of CyD-drug inclusion complexes can protect drug molecules from physiological degradation, or elimination and thus increases the stability and bioavailability of drugs, of which the release takes place with time, accompanied by fiber degradation. In this review, we summarize studies related to CyD-functional electrospun nanofibers for drug delivery applications. The review begins with an introductory description of electrospinning; the structure, properties, and toxicology of CyD; and CyD-drug complexation. Thereafter, the release of various drug molecules from CyD-functional electrospun nanofibers is provided in subsequent sections. The review concludes with a summary and outlook on material strategies.

Spectral and theoretical study on complexation of sulfamethoxazole with β- and HPβ-cyclodextrins in binary and ternary systems

The inclusion complexes of sulfamethoxazole (SMX) with β-cyclodextrin (βCD) and (2-hydroxypropyl) β-cyclodextrin (HPβCD) were prepared. Fluorescence spectroscopy and electrospray mass spectrometry, ESI-MS, were used to investigate and characterize the inclusion complexation of SMX with cyclodextrins in solutions. Whereas in the solid state the complexes were characterized by Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD) and Raman techniques. Enhanced twisted intramolecular charge transfer (TICT), emission as well as local excited (LE) bands were observed upon addition of HPβCD indicate that SMX enters deeper into the cyclodextrins cavity. The stoichiometries and association constants of these complexes have been determined by monitoring the fluorescence data. The effect of presence of ternary components like arginine and cysteine on the complexation efficiency of SMX with cyclodextrins was investigated. Molecular Dynamic simulations were also performed to shed an atomistic insight into the complexation mechanism. The results obtained showed that complexes of SMX with both cyclodextrins are stabilized in aqueous media by strong hydrogen bonding interactions.

Molecular recognition of N-acetyltryptophan enantiomers by β-cyclodextrin

The enantioselectivity of β-cyclodextrin (β-CD) towards L- and D-N-acetyltryptophan (NAcTrp) has been studied in aqueous solution and the crystalline state. NMR studies in solution show that β-CD forms complexes of very similar but not identical geometry with both L- and D-NAcTrp and exhibits stronger binding with L-NAcTrp. In the crystalline state, only β-CD–L-NAcTrp crystallizes readily from aqueous solutions as a dimeric complex (two hosts enclosing two guest molecules). In contrast, crystals of the complex β-CD–D-NAcTrp were never obtained, although numerous conditions were tried. In aqueous solution, the orientation of the guest in both complexes is different than in the β-CD–L-NAcTrp complex in the crystal. Overall, the study shows that subtle differences observed between the β-CD–L,D-NAcTrp complexes in aqueous solution are magnified at the onset of crystallization, as a consequence of accumulation of many soft host–guest interactions and of the imposed crystallographic order, thus resulting in very dissimilar propensity of each enantiomer to produce crystals with β-CD.

Hydroformylation of Alkenes in a Planetary Ball Mill: From Additive-Controlled Reactivity to Supramolecular Control of Regioselectivity

The Rh-catalyzed hydroformylation of aromatic-substituted alkenes is performed in a planetary ball mill under CO/H₂ pressure. The dispersion of the substrate molecules and the Rh-catalyst into the grinding jar is ensured by saccharides: methyl-α-d-glucopyranoside, acyclic dextrins, or cyclodextrins (CDs, cyclic oligosaccharides). The reaction affords the exclusive formation of aldehydes whatever the saccharide. Acyclic saccharides disperse the components within the solid mixture leading to high conversions of alkenes. However, they showed typical selectivity for α-aldehyde products. If CDs are the dispersing additive, the steric hindrance exerted by the CDs on the primary coordination sphere of the metal modifies the selectivity so that the β-aldehydes were also formed in non-negligible proportions. Such through-space control via hydrophobic effects over reactivity and regioselectivity reveals the potential of such solventless process for catalysis in solid state.

Aza-capped cyclodextrins for intra-cavity metal complexation

N,N-Chelators based on aza-capped cyclodextrins were designed to produce complexes with an encapsulated metal unit.