Selective recovery of gold and other metal ions from an algal biomass

Metal sequestration by Microcystis extracellular polymers: a promising path to greener water treatment

The problem of heavy metal pollution in water bodies poses a significant threat to both the environment and human health, as these toxic substances can persist in aquatic ecosystems and accumulate in the food chain. This study investigates the promising potential of using Microcystis aeruginosa extracellular polymeric substances (EPS) as an environmentally friendly, highly efficient solution for capturing copper (Cu2+) and nickel (Ni2+) ions in water treatment, emphasizing their exceptional ability to promote green technology in heavy metal sequestration. We quantified saccharides, proteins, and amino acids in M. aeruginosa biomass and isolated EPS, highlighting their metal-chelating capabilities. Saccharide content was 36.5 mg g-1 in biomass and 21.4 mg g-1 in EPS, emphasizing their metal-binding ability. Proteins and amino acids were also prevalent, particularly in EPS. Scanning electron microscopy (SEM) revealed intricate 3D EPS structures, with pronounced porosity and branching configurations enhancing metal sorption. Elemental composition via energy dispersive X-ray analysis (EDAX) identified essential elements in both biomass and EPS. Fourier transform infrared (FTIR) spectroscopy unveiled molecular changes after metal treatment, indicating various binding mechanisms, including oxygen atom coordination, π-electron interactions, and electrostatic forces. Kinetic studies showed EPS expedited and enhanced Cu2+ and Ni2+ sorption compared to biomass. Thermodynamic analysis confirmed exothermic, spontaneous sorption. Equilibrium biosorption studies displayed strong binding and competitive interactions in binary metal systems. Importantly, EPS exhibited impressive maximum sorption capacities of 44.81 mg g-1 for Ni2+ and 37.06 mg g-1 for Cu2+. These findings underscore the potential of Microcystis EPS as a highly efficient sorbent for heavy metal removal in water treatment, with significant implications for environmental remediation and sustainable water purification.

Physicochemical properties of environmental media can affect the adsorption of arsenic (As) by microplastics

Microplastics are emerging pollutants that can adsorb heavy metals and threaten human health through food chain. Recently, there has been increasing interest in understanding the adsorption behavior of heavy metals by microplastics in farmland soil. In particular, arsenic (As), as a carcinogen, has the potential to be adsorbed by soil microplastics. However, the mechanisms and controlling factors of As adsorption by microplastics in farmland soil under natural conditions are still unknown. Here, microplastics and As were respectively added to farmland soils with different physicochemical properties from twelve provinces of China for adsorption experiment. We performed surface analysis of microplastics, quantified As accumulation through quasi-first-order kinetic equation and developed regression models to screen the factors controlling As adsorption. The results showed that the adsorption of As by soil microplastics was a chemical process accompanied by the loss of electrons from oxygen-containing functional groups. Soil cation exchange capacity (CEC) was the main factor controlling the adsorption rate, while soil organic matter (SOM), total nitrogen (TN) and CEC mainly influenced the equilibrium adsorption capacity. This is the first report on microplastic-As adsorption in natural soil, which allows deeper insights into risk assessment, prediction and control of microplastic-As pollution in agricultural soil.

Polystyrene and low-density polyethylene pellets are less effective in arsenic adsorption than uncontaminated river sediment

The adsorption process of inorganic arsenic (As) plays an important role in its mobility, bioavailability, and toxicity in the river environment. In this work, the adsorption of dissolved arsenite (As(III)) and arsenate (As(V)) by microplastics (MPs) pellets (polystyrene (PS) and low-density polyethylene (LDPE)), river sediment, and their mixture were investigated to assess the adsorption affinities and mechanism. The adsorption kinetics showed slow and mild rising zones from the natural behavior of the chemical adsorption. The results indicated that both MP characteristics and water properties played a significant role in the adsorption behavior of inorganic As species. The As adsorption equilibrium was modeled well by both Langmuir and Freundlich isotherms and partly fitted with the Sips model suggesting that both mono-layer and multi-layer adsorption occurred during adsorption The spontaneous adsorption process for both As(III) and As(V) was evidenced by the adsorption thermodynamics. The maximum adsorption capacities of As(III) and As(V) reached 143.3 mg/kg and 109.8 mg/kg on PS in deionized water, which were higher than those on sediment-PS mixture (119.3 mg/kg, 99.2 mg/kg), which were all lower than on sediment alone (263.3 mg/kg, 398.7 mg/kg). The Fourier transform infrared spectroscopy analysis identified that As(III) and As(V) interaction with sediment surface functional groups was the main adsorption mechanism from surface complexation and coordination. Two functional groups of polystyrene (-NH2, -OH) were mainly involved in the adsorption of inorganic As species on PS, while -COO- and -OH functional groups contributed to the adsorption mechanism of inorganic As species on LDPE. The findings provide valuable insight on the adsorption behavior and mechanisms of As(III) and As(V) in river systems in the presence of MPs particles. Both PS and LDPE were shown to be less effective than river sediment in the adsorption of As species from water, which provides a different perspective in understanding the scale of MPs impact in pollutant transport in the aquatic environment.

Microalgal flocculation and sedimentation: spatiotemporal evaluation of the effects of the pH and calcium concentration

The high cost of harvesting microalgae is a major hurdle for the microalgae industry, and an efficient pre-concentration method is required. In this study, the effects of using different pH values (between pH 3 and 11) and calcium (Ca²⁺) concentrations (between 0 and 5 mM) on Chlorella vulgaris sedimentation were investigated by evaluating the spacio-temporal distributions of microalgae cells. Fast and efficient sedimentation occurred (within 10 min) at a high Ca²⁺ concentration (5 mM) at pH 9 and 11. However, the sediment volume was lower at a Ca²⁺ concentration of 3 mM than at a Ca²⁺ concentration of 5 mM. This indicated that the Ca²⁺ concentration strongly affected the sediment volume. Fast sedimentation and a low sediment volume were found at pH 7 and a Ca²⁺ concentration of 5 mM, probably because of the neutral charge in the system (adhesion to calcium precipitates would have occurred at a high pH). The highest Ca²⁺ recovery (82%) was achieved when sediment produced at pH 11 and a Ca²⁺ concentration of 5 mM was acidified to pH 3.

Polyphosphate: A Multifunctional Metabolite in Cyanobacteria and Algae

Polyphosphate (polyP), a polymer of orthophosphate (PO4 3-) of varying lengths, has been identified in all kingdoms of life. It can serve as a source of chemical bond energy (phosphoanhydride bond) that may have been used by biological systems prior to the evolution of ATP. Intracellular polyP is mainly stored as granules in specific vacuoles called acidocalcisomes, and its synthesis and accumulation appear to impact a myriad of cellular functions. It serves as a reservoir for inorganic PO4 3- and an energy source for fueling cellular metabolism, participates in maintaining adenylate and metal cation homeostasis, functions as a scaffold for sequestering cations, exhibits chaperone function, covalently binds to proteins to modify their activity, and enables normal acclimation of cells to stress conditions. PolyP also appears to have a role in symbiotic and parasitic associations, and in higher eukaryotes, low polyP levels seem to impact cancerous proliferation, apoptosis, procoagulant and proinflammatory responses and cause defects in TOR signaling. In this review, we discuss the metabolism, storage, and function of polyP in photosynthetic microbes, which mostly includes research on green algae and cyanobacteria. We focus on factors that impact polyP synthesis, specific enzymes required for its synthesis and degradation, sequestration of polyP in acidocalcisomes, its role in cellular energetics, acclimation processes, and metal homeostasis, and then transition to its potential applications for bioremediation and medical purposes.

As(III) adsorption onto different-sized polystyrene microplastic particles and its mechanism

We systematically investigated the surface characteristics of polystyrene microplastic particles (PSMPs) prepared by ball milling to impart a porous surface structure and special surface characteristics, and studied the mechanism of adsorption of As(III) onto PSMPs. The sizes of the PSMPs prepared by ball milling for 2, 4, and 8 h were in the ranges of 0.1-1, 1-10, and 10-100 μm, respectively. That is, the longer the milling time is, the larger the specific surface area of the particles is. Moreover, the higher the point of zero charge is, the higher the adsorbed amount of As(III) is. The highest adsorption rate of As(III) onto PSMPs was found to be 1.12 mg g^-1. After 1200 min, the adsorption reached equilibrium, and a pseudo-second-order model better fitted the As(III) adsorption kinetics. The Langmuir and Freundlich models could well describe the adsorption isotherms. Furthermore, hydrogen bonds between As(III) and PSMPs were broken at high temperatures, resulting in a decrease in As(III) adsorption onto PSMP, which indicated that the adsorption process was exothermic. Increases in the pH and concentrations of interfering nitrate and phosphate ions in the solution led to inhibited As(III) adsorption of PSMPs. The electrostatic potential of most areas of the PSMP surface was positive, and the H atom on the carboxyl group exhibited a very large positive potential (+56.6 kcal/mol), and thus attracted arsenic oxyanions. Thus, it was determined that As(III) adsorbed to the surface of PSMPs through hydrogen bonding with the carboxyl group. Electrostatic forces and non-covalent interactions are the key mechanisms affecting the adsorption of As(III) onto PSMPs. This work provides a clear theoretical basis for the behavior of the PSMP as an arsenic carrier and might aid to improve the environmental toxicity of arsenic.

Gold extraction from biosolid sludge obtained by sewage treatment

Treatment of municipal wastewater, which involves multiple steps, produces large amounts of biosolid sludge, which is either incinerated or disposed in landfills. This sludge contains carbon, nitrogen, and phosphorous in appreciable amounts, and hence, it is being recently suggested that it should be used as a fertilizer. However, the biosolid sludge also contains large amounts of heavy metals, which exert harmful effects on the plantation and therefore, they must be removed before it can be used as a fertilizer. In addition, some of these heavy metals are precious such as gold. In this work, heavy metals present in the biosolid sludge produced from municipal wastewater plants were extracted using acidic solutions of different strengths. The method of selected gold extraction using tributyl phosphate (TBP) in kerosene solution from the metal rich acidic solution was also tested. The rate and yield of gold extraction increase with the increase in the acidic strength. The highest extracted gold yield was 0.012 mg/g of biomass. The amount of gold recovery into the TBP solution was 26%, which was much higher than that of other metals extracted into the acid solution. The importance of removing the metals from the biosolid is obvious, as it allows the latter to be used as a fertilizer. In addition, using only one additional step, a valuable product, gold, can be selectively separated, despite being present in lower amounts that other metals found in the sludge.

Adsorption of Uranium(VI) from Aqueous Solution by Modified Rice Stem

The biosorption is an effective and economical method to deal with the wastewater with low concentrations of uranium. In this study, we present a systematic investigation of the adsorption properties, such as the kinetics, thermodynamics, and mechanisms, of modified rice stems. The rice stems treated with 0.5 mol/L NaOH solutions show higher removal percentage of uranium than those unmodified under the conditions of initial pH (pH = 4.0), absorbent dosage (5–8 g/L), temperature (T = 298 K), and adsorption equilibrium time (t = 180 min). The removal percentage of uranium(VI) decreases with increasing initial concentration of uranium(VI). The Langmuir isotherm model, which suggests predominant monolayered sorption, is better than Freundlich and Temkin models to elucidate the adsorption isotherm of adsorbed uranium. Kinetic analyses indicate that the uranium(VI) adsorption of the modified rice stem is mainly controlled by surface adsorption. The pseudo-second-order kinetic model, with the correlation coefficient of R2 = 0.9992, fits the adsorption process much better than other kinetic models (e.g., pseudo-second-order kinetic model, Elovich kinetic model, and intraparticle diffusion model). The thermodynamic parameters ΔG0, ΔH0, and ΔS0 demonstrate that the adsorption of uranium(VI) is an endothermic and spontaneous process, which can be promoted by temperature. The adsorption of uranium can change the morphology and the structure characteristics of the modified rice stem through interaction with the adsorption sites, such as O-H, C=O, Si=O, and P-O on the surface.

Potential of Zeolite and Algae in Biomass Immobilization

The interest in utilizing algae for wastewater treatment has been increased due to many advantages. Algae-wastewater treatment system offers a cost-efficient and environmentally friendly alternative to conventional treatment processes such as electrocoagulation and flocculation. In this biosystem, algae can assimilate nutrients in the wastewater for their growth and simultaneously capture the carbon dioxide from the atmosphere during photosynthesis resulting in a decrease in the greenhouse gaseousness. Furthermore, the algal biomass obtained from the treatment process could be further converted to produce high value-added products. However, the recovery of free suspended algae from the treated effluent is one of the most important challenges during the treatment process as the current methods such as centrifugation and filtration are faced with the high cost. Immobilization of algae is a suitable approach to overcome the harvesting issue. However, there are some drawbacks with the common immobilization carriers such as alginate and polyacrylamide related to low stability and toxicity, respectively. Hence, it is necessary to apply a new carrier without the mentioned problems. One of the carriers that can be a suitable candidate for the immobilization is zeolite. To date, various types of zeolite have been used for the immobilization of cells of bacteria and yeast. If there is any possibility to apply them for the immobilization of algae, it needs to be considered in further studies. This article reviews cell immobilization technique, biomass immobilization onto zeolites, and algal immobilization with their applications. Furthermore, the potential application of zeolite as an ideal carrier for algal immobilization has been discussed.

A novel low cost microalgal harvesting technique with coagulant recovery and recycling

In this study, a novel low cost and sustainable microalgal harvesting technique was developed using the concept of coagulant recovery concentration and recycling. Al³⁺ can be recovered from harvested Scenedesmus acuminatus biomass with 0.1 M HCl, at an acid solution-biomass ratio of 250 ml g^-1. The residual Al³⁺ content in the purified biomass was reduced to 0.11 ± 0.0006 mg g^-1, while a higher content of 59.74 ± 3.11 mg g^-1 was found in the coagulation harvested biomass. The recovered Al³⁺ solution was concentrated 25 times and then reused for the harvesting of S. acuminatus. The Al³⁺ recovery and reuse were repeated 5 times, and the harvesting efficiencies were found higher than the fresh Al³⁺ as a result of the presence of extracellular polymeric substances in the recovered coagulant solution which aided the coagulation process. According to the technical-economic analysis, the cost of chemicals decreased 50% after 5 times recycling.

Zinc oxide templating of porous alginate beads for the recovery of gold ions

In this study, a novel porous alginate adsorbent was prepared by zinc oxide templating to selectively adsorb Au (III) ions from multi-metallic solutions under acidic condition. Due to the porous structure of the prepared sorbent, high uptake capacity and fast adsorption kinetics of Au (ІІІ) were achieved, which renders the prepared adsorbent great potential for practical applications in fixed-bed columns for large-scale applications. The adsorption of Au (III) by the prepared adsorbent led to the reduction of Au (III) to metallic gold. Adsorption and reduction of Au (III) in the process are mediated by the ionic and covalent interaction between Au (III) ions and the protonated functional groups on the modified alginate.

Status of electronic waste recycling techniques: a review

The increasing use of electrical and electronic equipment leads to a huge generation of electronic waste (e-waste). It is the fastest growing waste stream in the world. Almost all electrical and electronic equipment contain printed circuit boards as an essential part. Improper handling of these electronic wastes could bring serious risk to human health and the environment. On the other hand, proper handling of this waste requires a sound management strategy for awareness, collection, recycling, and reuse. Nowadays, the effective recycling of this type of waste has been considered as a main challenge for any society. Printed circuit boards (PCBs), which are the base of many electronic industries, are rich in valuable heavy metals and toxic halogenated organic substances. In this review, the composition of different PCBs and their harmful effects are discussed. Various techniques in common use for recycling the most important metals from the metallic fractions of e-waste are illustrated. The recovery of metals from e-waste material after physical separation through pyrometallurgical, hydrometallurgical, or biohydrometallurgical routes is also discussed, along with alternative uses of non-metallic fraction. The data are explained and compared with the current e-waste management efforts done in Egypt. Future perspectives and challenges facing Egypt for proper e-waste recycling are also discussed.

Potential use of algae for heavy metal bioremediation, a critical review

Algae have several industrial applications that can lower the cost of biofuel co-production. Among these co-production applications, environmental and wastewater bioremediation are increasingly important. Heavy metal pollution and its implications for public health and the environment have led to increased interest in developing environmental biotechnology approaches. We review the potential for algal biosorption and/or neutralization of the toxic effects of heavy metal ions, primarily focusing on their cellular structure, pretreatment, modification, as well as potential application of genetic engineering in biosorption performance. We evaluate pretreatment, immobilization, and factors affecting biosorption capacity, such as initial metal ion concentration, biomass concentration, initial pH, time, temperature, and interference of multi metal ions and introduce molecular tools to develop engineered algal strains with higher biosorption capacity and selectivity. We conclude that consideration of these parameters can lead to the development of low-cost micro and macroalgae cultivation with high bioremediation potential.

Recovery opportunities for metals and energy from sewage sludges

Limitations on current wastewater treatment plant (WWTP) biological processes and solids disposal options present opportunities to implement novel technologies that convert WWTPs into resource recovery facilities. This review considered replacing or augmenting extensive dewatering, anaerobic digestion, and off-site disposal with new thermo-chemical and liquid extraction processes. These technologies may better recover energy and metals while inactivating pathogens and destroying organic pollutants. Because limited direct comparisons between different sludge types exist in the literature for hydrothermal liquefaction, this study augments the findings with experimental data. These experiments demonstrated 50% reduction in sludge mass, with 30% of liquefaction products converted to bio-oil and most metals sequestered within a small mass of solid bio-char residue. Finally, each technology's contribution to the three sustainability pillars is investigated. Although limiting hazardous materials reintroduction to the environment may increase economic cost of sludge treatment, it is balanced by cleaner environment and valuable resource benefits for society.

Microalgae harvesting by pH adjusted coagulation-flocculation, recycling of the coagulant and the growth media

Coagulation-flocculation can be considered as one of the least energy intensive microalgae biomass harvesting processes. However, cost of the coagulant and biomass contamination are two critical issues that need to be considered. In this study, ferric chloride (72-96mg/L) was used to effectively harvest Scenedesmus sp. (530mg/L) - grown in BG-11 media and wastewater. Reducing the culture pH below 6.5, greatly improved the harvesting efficiency. Acidic solution (pH 1.0) was very effective to recover (almost 90%) the associated iron from the harvested biomass. Scenedesmus sp. was able to grow in the supernatant and utilize the residual iron in it. Iron extracted solution, with a supplementation of 9.8mg/L ferric chloride, was able to achieve similar harvesting efficiency. The potential recovery of iron from the harvested biomass and its reuse in the harvesting can improve the biomass quality for subsequent downstream processing while reducing the cost.

Influence of culture density, pH, organic acids and divalent cations on the removal of nutrients and metals by immobilized Anabaena doliolum and Chlorella vulgaris

The potential of alginate-immobilized Anabaena doliolum and Chlorella vulgaris was assessed for removal of nutrients (NO inf3 (sup-) and NH inf4 (sup+) ) and metals (Cr2O inf7 (sup2-) and Ni(2+)) at different biomass concentrations (0.05, 0.1, 0.25, 0.49 and 1.22 g dry wt l(-1)) and pH values (4 to 10). Though uptake of all these substances was higher in concentrated algal beads (0.25, 0.49 and 1.22 g dry wt l(-1)), their rate of uptake was significantly (P<0.001) lower than that of low (0.05 g dry wt l(-1)) cell density beads. For A. doliolum, there was no significant difference in uptake rates for beads having densities of 0.05 and 0.1 g dry wt l(-1). Chlorella vulgaris, however, showed maximum efficiency at 0.1 g dry wt l(-1). Uptake of both the nutrients and the metals was maximal at pH 7 followed by pH 8, 6, 9, 10, 5 and 4. Of the different substances (organic acids and divalent cations) used, humic acid was most efficient in decreasing metal uptake. Mg(2+) was, however, more efficient than Ca(2+) in decreasing Ni(2+) uptake. Immobilized algae with a cell density of 0.1 g dry wt l(-1) were the most efficient for nutrient and metal removal at pH 6 to 8.

Insights into the interactions of cyanobacteria with uranium

Due to various activities associated with nuclear industry, uranium is migrated to aquatic environments like groundwater, ponds or oceans. Uranium forms stable carbonate complexes in the oxic waters of pH 7-10 which results in a high degree of uranium mobility. Microorganisms employ various mechanisms which significantly influence the mobility and the speciation of uranium in aquatic environments. Uranyl bioremediation studies, this far, have generally focussed on low pH conditions and related to adsorption of positively charged UO2 (2+) onto negatively charged microbial surfaces. Sequestration of anionic uranium species, i.e. [UO2(CO3) 2 (2-) ] and [UO2(CO3) 3 (4-) ] onto microbial surfaces has received only scant attention. Marine cyanobacteria are effective metal adsorbents and represent an important sink for metals in aquatic environment. This article addresses the cyanobacterial interactions with toxic metals in general while stressing on uranium. It focusses on the possible mechanisms employed by cyanobacteria to sequester uranium from aqueous solutions above circumneutral pH where negatively charged uranyl carbonate complexes dominate aqueous uranium speciation. The mechanisms demonstrated by cyanobacteria are important components of biogeochemical cycle of uranium and are useful for the development of appropriate strategies, either to recover or remediate uranium from the aquatic environments.

Gold biosorption by exopolysaccharide producing cyanobacteria and purple nonsulphur bacteria

AIMS

This study was aimed at investigating the possible exploitation of phototrophic micro-organisms for the removal and the recovery of Au from Au-containing wastewaters deriving from a plating industry.

METHODS AND RESULTS

A screening among ten phototrophic micro-organisms was carried out with pure solutions of Au to select the best strain in terms of metal uptake and selectivity. The direct use of the selected micro-organism on the Au-containing industrial wastewater was then carried out with the aim of assessing the potential of its use for the removal and the recovery of the precious metal from industrial wastewaters.

CONCLUSIONS

This study showed the good potential of some exopolysaccharide-producing cyanobacteria as biosorbents for the recovery of Au from wastewaters of plating industries but also pointed out the need to design an efficient technology for the recovery of the metal from the biomass.

SIGNIFICANCE AND IMPACT OF THE STUDY

The selection of good biosorbents for the recovery of gold from industrial wastewaters may open new perspectives to a green biotechnology so far considered too expensive for the mere treatment of wastewaters containing low valuable metals.

Microalgae and wastewater treatment

Organic and inorganic substances which were released into the environment as a result of domestic, agricultural and industrial water activities lead to organic and inorganic pollution. The normal primary and secondary treatment processes of these wastewaters have been introduced in a growing number of places, in order to eliminate the easily settled materials and to oxidize the organic material present in wastewater. The final result is a clear, apparently clean effluent which is discharged into natural water bodies. This secondary effluent is, however, loaded with inorganic nitrogen and phosphorus and causes eutrophication and more long-term problems because of refractory organics and heavy metals that are discharged. Microalgae culture offers an interesting step for wastewater treatments, because they provide a tertiary biotreatment coupled with the production of potentially valuable biomass, which can be used for several purposes. Microalgae cultures offer an elegant solution to tertiary and quandary treatments due to the ability of microalgae to use inorganic nitrogen and phosphorus for their growth. And also, for their capacity to remove heavy metals, as well as some toxic organic compounds, therefore, it does not lead to secondary pollution. In the current review we will highlight on the role of micro-algae in the treatment of wastewater.

Sorption behavior of europium(III) and curium(III) on the cell surfaces of microorganisms

We investigated the association of europium(III) and curium(III) with the microorganismsChlorella vulgaris,Bacillus subtilis,Pseudomonas fluorescens,Halomonassp.,Halobacterium salinarum, andHalobacterium halobium. We determined the kinetics and distribution coefficients (Kd) for Eu(III) and Cm(III) sorption at pH 3-5 by batch experiments, and evaluated the number of water molecules in the inner-sphere (NH₂O) and the degree of strength of ligand field (RE/M) for Eu(III) by time-resolved laser-induced fluorescence spectroscopy (TRLFS). Exudates fromC. vulgaris,Halomonassp., andH. halobiumhad an affinity for Eu(III) and Cm(III). The logKdof Eu(III) and Cm(III) showed that their sorption was not fully due to the exchange with three protons on the functional groups on cell surfaces. The halophilic microorganisms (Halomonassp.,Halobacterium salinarum,H. halobium) showed almost no pH dependence in logKd, indicating that an exchange with Na+on the functional groups was involved in their sorption. The Δ NH₂O(=9-NH₂O) for Eu(III) onC. vulgariswas 1-3, while that for the other microorganisms was over 3, demonstrating that the coordination of Eu(III) withC. vulgariswas predominantly an outer-spherical process. TheRE/Mfor Eu(III) on halophilic microorganisms was 2.5-5, while that for non-halophilic ones was 1-2.5. This finding suggests that the coordination environment of Eu(III) on the halophilic microorganisms is more complicated than that on the other three non-halophilic ones.

Adsorption behavior of mercury on functionalized aspergillus versicolor mycelia: atomic force microscopic study

The adsorption characteristics of mercury on Aspergillus versicolor mycelia have been studied under varied environments. The mycelia are functionalized by carbon disulfide (CS(2)) treatment under alkaline conditions to examine the enhance uptake capacity and explore its potentiality in pollution control management. The functionalized A. versicolor mycelia have been characterized by scanning electron microscopy-energy dispersive X-ray analysis (SEM-EDXA), attenuated total reflection infrared (ATR-IR), and atomic force microscopy (AFM) probing. SEM and AFM images exhibit the formation of nanoparticles on the mycelial surface. ATR-IR profile confirms the functionalization of the mycelia following chemical treatment. ATR-IR and EDXA results demonstrate the binding of the sulfur groups of the functionalized mycelia to the mercury and consequent formation metal sulfide. AFM study reveals that the mycelial surface is covered by a layer of densely packed domain like structures. Sectional analysis yields significant increase in average roughness (R(rms)) value (20.5 +/- 1.82 nm) compared to that of the pristine mycelia (4.56 +/- 0.82 nm). Surface rigidity (0.88 +/- 0.06 N/m) and elasticity (92.6 +/- 10.2 MPa) obtained from a force distance curve using finite element modeling are found to increase significantly with respect to the corresponding values of (0.65 +/- 0.05 N/m and 32.8 +/- 4.5 MPa) of the nonfunctionalized mycelia. The maximum mercury adsorption capacity of the functionalized mycelia is observed to be 256.5 mg/g in comparison to 80.71 mg/g for the pristine mycelia.

Use of Algae for Removing Heavy Metal Ions From Wastewater: Progress and Prospects

Many algae have immense capability to sorb metals, and there is considerable potential for using them to treat wastewaters. Metal sorption involves binding on the cell surface and to intracellular ligands. The adsorbed metal is several times greater than intracellular metal. Carboxyl group is most important for metal binding. Concentration of metal and biomass in solution, pH, temperature, cations, anions and metabolic stage of the organism affect metal sorption. Algae can effectively remove metals from multi-metal solutions. Dead cells sorb more metal than live cells. Various pretreatments enhance metal sorption capacity of algae. CaCl2 pretreatment is the most suitable and economic method for activation of algal biomass. Algal periphyton has great potential for removing metals from wastewaters. An immobilized or granulated biomass-filled column can be used for several sorption/desorption cycles with unaltered or slightly decreased metal removal. Langmuir and Freundlich models, commonly used for fitting sorption data, cannot precisely describe metal sorption since they ignore the effect of pH, biomass concentration, etc. For commercial application of algal technology for metal removal from wastewaters, emphasis should be given to: (i) selection of strains with high metal sorption capacity, (ii) adequate understanding of sorption mechanisms, (iii) development of low-cost methods for cell immobilization, (iv) development of better models for predicting metal sorption, (v) genetic manipulation of algae for increased number of surface groups or over expression of metal binding proteins, and (vi) economic feasibility.

Adsorption study of metal ions onto crosslinked seaweed Laminaria japonica

An efficient and cost effective non-conventional adsorbent has been prepared from seaweed Laminaria japonica by crosslinking with epichlorohydrin. Its adsorption behavior for trivalent and divalent metal ions was studied and it was found to exhibit excellent selectivity towards several metal ions. As a typical example, binary mixture of Pb(II) and Zn(II) was studied by using a packed column, indicating that the Pb(II) ion can be easily separated from its mixture with a concentration factor of 74 times. The maximum adsorption capacity for Pb(II), Cd(II), Fe(III) was found to be 1.35, 1.1, 1.53 mol kg(-1), respectively, while 0.8 7 mol kg(-1) for both La(III) and Ce(III) from the single metal ion solution according to the adsorption isotherm. The obtained values are comparable to the commercially available synthetic chelating resins.

Competitive metal binding to a silicate-immobilized humic material

The investigation of the competitive binding of metal ions to a biogenic material comprised of organic peat immobilized in a polysilicate matrix was undertaken. This material was packed into 5.0mL bed-volume columns using 40-60mesh size particles. Two separate mixtures of metal ions were studied by monitoring the solution pH and the concentration of each metal in the effluent as a function of the volume of influent introduced to the material. These mixtures contained either the metal ions Ca(2+), Mg(2+), and Cu(2+) or the ions Cu(2+), Hg(2+), and Pb(2+). A general order of binding affinities was determined to be Mg(2+)<Ca(2+)<<Cu(2+)<Pb(2+)<Hg(2+). Comparisons of amounts of metal ions bound and protons released indicated the initial release of two protons for each divalent metal ion bound. However, prolonged exposure of the material to the metal solutions yielded a molar ratio of 1:1. This suggests the involvement of ion exchange sites followed by that of sites using an alternate binding mechanism. The presence of binding sites with varied mechanisms and metal ion affinities was further illustrated through the initial binding and subsequent release of lower affinity metal ions (e.g., Mg(2+) and Ca(2+)).

Proteins and protein-rich biomass as environmentally friendly adsorbents selective for precious metal ions

Proteins exhibit specific interactions with various metal ions, which play important roles in a living cell. Here, we found that various proteins selectively adsorbed precious metal ions at a wide range of pH values. Studies on protein sequences and on synthesized peptides revealed that a histidine-containing sequence had specific interactions with precious metal ions (Au3+ and Pd2+). We then investigated a few types of protein-rich biomass as adsorbents for precious metal ions. In the presence of various transition metal ions, Au3+ and Pd2+ were also selectively adsorbed onto the biomass tested. The bound precious metal ions were recovered by aqua regia after charring the metal-bound biomass. Finally, we demonstrated the successful recovery of Au3+ and Pd2+ from a metal refining solution and a metal plating waste using the biomass. We propose an environmentally friendly recycling system for precious metal ions using protein-rich biomass.

Evaluation of the marine algae Ulva fasciata and Sargassum sp. for the biosorption of Cu(II) from aqueous solutions

In this study, the adsorption properties of two different marine algae (Ulva fasciata (green algae) and Sargassum sp. (brown algae)) were investigated. Equilibrium isotherms and kinetics were studied to evaluate the relative ability of the two algae to sequester Cu(II) from aqueous solutions. The maximum biosorption capacity obtained was 73.5 mg g(-1) for U. fasciata and 72.5 mg g(-1) for Sargassum sp. at a solution pH of 5.5 +/- 0.5. A significant fraction of the total copper(II) uptake was achieved within 30 min. The copper(II) uptake by the biosorbents was best described by pseudo-second-order rate model.

Biosorption of copper(II) and cobalt(II) from aqueous solutions by crab shell particles

Biosorption of each of the heavy metals, copper(II) and cobalt(II) by crab shell was investigated in this study. The biosorption capacities of crab shell for copper and cobalt were studied at different particle sizes (0.456-1.117 mm), biosorbent dosages (1-10 g/l), initial metal concentrations (500-2000 mg/l) and solution pH values (3.5-6) in batch mode. At optimum particle size (0.767 mm), biosorbent dosage (5 g/l) and initial solution pH (pH 6); crab shell recorded maximum copper and cobalt uptakes of 243.9 and 322.6 mg/g, respectively, according to Langmuir model. The kinetic data obtained at different initial metal concentrations indicated that biosorption rate was fast and most of the process was completed within 2h, followed by slow attainment of equilibrium. Pseudo-second order model fitted the data well with very high correlation coefficients (>0.998). The presence of light and heavy metal ions influenced the copper and cobalt uptake potential of crab shell. Among several eluting agents, EDTA (pH 3.5, in HCl) performed well and also caused low biosorbent damage. The biosorbent was successfully regenerated and reused for five cycles.