Analysis of secondary organic aerosol compounds from the photooxidation of d-limonene in the presence of NOx and their detection in ambient PM2.5

Analytical methodologies for oxidized organic compounds in the atmosphere

Oxidized compounds in the atmosphere can occur as emitted primary compounds or as secondary products when volatile emitted precursors react with various oxidants. Due to the presence of polar functional groups, their vapor pressures decrease, and they condense onto small particles. Thereby, they have an effect on climate change by the formation of clouds and scattering solar radiation. The particles and oxidized compounds themselves can cause serious health problems when inhaled. Therefore, it is of utmost importance to study oxidized compounds in the atmosphere. Much ongoing research is focused on the discovery of new oxidized substances and on the evaluation of their sources and factors influencing their formation. Monitoring biogenic and anthropogenic primary oxidized compounds or secondary oxidized products in chamber experiments or field campaigns is common. New discoveries have been reported, including various oxidized compounds and a new group of compounds called highly oxidized organic molecules (HOMs). Analytics of HOMs are mainly focused on chromatography and high-resolution mass spectrometry employing chemical ionization for identifying and quantifying compounds at low concentrations. Oxidized compounds can also be monitored by spectrophotometric methods in which the determinations of total amounts are based on functional groups. This review highlights recent findings on oxidized organic compounds in the atmosphere and analytical methodologies used for their detection and quantification. The discussion includes gas and liquid chromatographic methods, sampling, extraction, concentration, and derivatization procedures involved, as well as mass spectrometric and spectrophotometric methods.

Molecular and Structural Characterization of Isomeric Compounds in Atmospheric Organic Aerosol Using Ion Mobility-Mass Spectrometry

Secondary organic aerosol (SOA) formed through multiphase atmospheric chemistry makes up a large fraction of airborne particles. The chemical composition and molecular structures of SOA constituents vary between different emission sources and aging processes in the atmosphere, which complicates their identification. In this work, we employ drift tube ion mobility spectrometry with quadrupole time-of-flight mass spectrometry (IM-MS) detection for rapid gas-phase separation and multidimensional characterization of isomers in two biogenic SOAs produced from ozonolysis of isomeric monoterpenes, d-limonene (LSOA) and α-pinene (PSOA). SOA samples were ionized using electrospray ionization (ESI) and characterized using IM-MS in both positive and negative ionization modes. The IM-derived collision cross sections in nitrogen gas (^DTCCS_N2 ) for individual SOA components were obtained using multifield and single-field measurements. A novel application of IM multiplexing/high-resolution demultiplexing methodology was employed to increase sensitivity, improve peak shapes, and augment mobility baseline resolution, which revealed several isomeric structures for the measured ions. For LSOA and PSOA samples, we report significant structural differences of the isomer structures. Molecular structural calculations using density functional theory combined with the theoretical modeling of CCS values provide insights into the structural differences between LSOA and PSOA constituents. The average ^DTCCS_N2 values for monomeric SOA components observed as [M + Na]⁺ ions are 3-6% higher than those of their [M - H]^- counterparts. Meanwhile, dimeric and trimeric isomer components in both samples showed an inverse trend with the relevant values of [M - H]^- ions being 3-7% higher than their [M + Na]⁺ counterparts, respectively. The results indicate that the structures of Na⁺-coordinated oligomeric ions are more compact than those of the corresponding deprotonated species. The coordination with Na⁺ occurs on the oxygen atoms of the carbonyl groups leading to a compact configuration. Meanwhile, deprotonated molecules have higher ^DTCCS_N2 values due to their elongated structures in the gas phase. Therefore, ^DTCCS_N2 values of isomers in SOA mixtures depend strongly on the mode of ionization in ESI. Additionally, PSOA monomers and dimers exhibit larger ^DTCCS_N2 values (1-4%) than their LSOA counterparts owing to more rigid structures. A cyclobutane ring is present with functional groups pointing in opposite directions in PSOA compounds, as compared to noncyclic flexible LSOA structures, forming more compact ions in the gas phase. Lastly, we investigated the effects of direct photolysis on the chemical transformations of selected individual PSOA components. We use IM-MS to reveal structural changes associated with aerosol aging by photolysis. This study illustrates the detailed molecular and structural descriptors for the detection and annotation of structural isomers in complex SOA mixtures.

Determination of Volatility Parameters of Secondary Organic Aerosol Components via Thermal Analysis

To date, there are limited data on the thermal properties of secondary organic aerosol (SOA) components. In this study, we employed an experimental method to evaluate the physical properties of some atmospherically relevant compounds. We estimated the thermodynamic properties of SOA components, in particularly some carboxylic acids. The molar heat capacity, melting point and enthalpy, and vaporization enthalpy of the samples were determined via differential scanning calorimetry and thermogravimetric analysis, and their vaporization enthalpy (ΔHvap) was estimated using Clausius–Clapeyron and Langmuir equations based on their thermogravimetric profiles. The thermodynamic properties of benzoic acid as a reference compound agree well with the reported values. The obtained specific heat capacities of benzoic acid, phthalic acid, pinic acid, ketopinic acid, cis-pinonic acid, terpenylic acid and diaterpenylic acid acetate (DTAA) are 118.1, 169.4, 189.9, 223.9, 246.1, 223.2, and 524.1 J mol−1 K−1, respectively. The ΔHvap of benzoic acid, phthalic acid, ketopinic acid, DTAA, and 3-methylbutane-1,2,3-tricarboxylic acid (3-MBTCA) are 93.2 ± 0.4, 131.6, 113.8, and 124.4 kJ mol−1, respectively. The melting and vaporization enthalpies of the SOA components range from 7.3 to 29.7 kJ mol−1.

Rates and Yields of Unimolecular Reactions Producing Highly Oxidized Peroxy Radicals in the OH-Induced Autoxidation of α-Pinene, β-Pinene, and Limonene

Recent ambient atmospheric measurements have detected highly oxygenated organic molecules (HOMs) at many sites and are a consequence of autoxidation processes occurring at ambient temperatures. Monoterpenes in particular have a propensity to autoxidize although they exhibit a wide range of HOM yields, which may be due to a variety of reasons including reactions with different oxidants like OH and O₃, differing hydrogen (H) atom transfer or peroxy radical cyclization rates, numbers of available reaction pathways, and/or energy loss processes for activated HO-monoterpene or O₃-monoterpene adducts. In this work, the autoxidation mechanisms of (+)-α-pinene, (+)-β-pinene, and (+)-limonene following initial OH oxidation and three successive O₂ additions are examined using density functional theory (DFT) to understand what accounts for the disparity. Rates of different potential autoxidation pathways initiated by OH addition or abstraction reactions are quantified using transition-state theory (TST) and master equation approaches using the lowest-energy conformers. OH abstraction reactions do not appreciably influence HOM production in the pinenes and limit autoxidation for limonene because the subsequent autoxidation reactions are slow while OH addition reactions are found to be the main route to HOMs for all three monoterpenes. Generally, faster autoxidation rates are computed in later unimolecular reactions that produce RO₇ radicals after OH addition (∼10 s^-1 or greater) than rates for RO₅ peroxy radical production (0.2-7 s^-1). Mechanistic pathways that form RO₇ peroxy radicals are similar for all three monoterpenes with a particular bicyclo RO₇ radical involving a five-membered peroxide ring being favored for all three monoterpenes. The molar yields of RO₇ radicals are 4.6% (+10.0/-2.4), 3.8% (+9.1/-2.6), and 7.6% (+13.1/-4.9) for α-pinene, β-pinene, and limonene, respectively, at 298 K and 1 ppb of NO and only significantly decline at NO concentrations exceeding 10 ppb. The higher yield for limonene relative to the pinenes is predominantly a consequence of the initial oxidation step: OH adducts of the bicyclic pinenes have to use the excess energy after OH addition to break one of the rings and make the molecule more flexible for autoxidation although this process is inefficient, while one of the prominent OH adducts for monocyclic limonene does not have to do this and may add O₂ immediately before autoxidizing further. These insights may be used to guide a better representation of these processes in atmospheric models because they affect particulate matter (PM), NO_x, and ozone concentrations via enhanced production of low-volatility species, less early-generation NO_x cycling, and altered organic nitrate production.

Rapid production of highly oxidized molecules in isoprene aerosol via peroxy and alkoxy radical isomerization pathways in low and high NOx environments: Combined laboratory, computational and field studies

Recently, we identified seven novel hydroxy-carboxylic acids resulting from gas-phase reactions of isoprene in the presence of nitrogen oxides (NO_x), ozone (O₃), and/or hydroxyl radicals (OH). In the present study, we provide evidence that hydroxy-carboxylic acids, namely methyltartaric acids (MTA) are: (1) reliable isoprene tracers, (2) likely produced via rapid peroxy radical hydrogen atom (H) shift reactions (autoxidation mechanism) and analogous alkoxy radical H shifts in low and high NO_x environments respectively and (3) representative of aged ambient aerosol in the low NO_x regime. Firstly, MTA are reliable tracers of isoprene aerosol because they have been identified in numerous chamber experiments involving isoprene conducted under a wide range of conditions and are absent in the oxidation of mono- and sesquiterpenes. They are also present in numerous samples of ambient aerosol collected during the past 20 years at several locations in the U.S. and Europe. Furthermore, MTA concentrations measured during a year-long field study in Research Triangle Park (RTP), NC in 2003 show a seasonal trend consistent with isoprene emissions and photochemical activity. Secondly, an analysis of chemical ionization mass spectrometer (CIMS) data of several chamber experiments in low and high NO_x environments show that highly oxidized molecules (HOMs) derived from isoprene that lead to MTAs may be produced rapidly and considered as early generation isoprene oxidation products in the gas phase. Density functional theory calculations show that rapid intramolecular H shifts involving peroxy and alkoxy radicals possess low barriers for methyl-hydroxy-butenals (MHBs) that may represent precursors for MTA. From these results, a viable rapid H shift mechanism is proposed to occur that produces isoprene derived HOMs like MTA. Finally, an analysis of the mechanism shows that autoxidation-like pathways in low and high NO_x may produce HOMs in a few OH oxidation steps like commonly detected methyl tetrol (MT) isoprene tracers. The ratio of MTA/MT in isoprene aerosol is also shown to be significantly greater in field versus chamber samples indicating the importance of such pathways in the atmosphere even for smaller hydrocarbons like isoprene.

Seasonal variation of dicarboxylic acids in PM2.5 in Beijing: Implications for the formation and aging processes of secondary organic aerosols

Dicarboxylic acids are a group of highly oxidized components, which can provide insights into the formation mechanism and aging process of secondary organic aerosols (SOA). Based on the 12-h day and night PM_2.5 samples collected in downtown Beijing in January, April, July and October of 2017, dicarboxylic acids and relevant components were measured to investigate their seasonal variation pattern and sources. High concentrations of the identified organic acids were observed, following the decreasing order of July > January > October > April. The high fractions of phthalic acid and maleic acid in January indicated severe aromatic SOA pollution during the sampling period in winter, and the high malonic acid to succinic acid and malic acid to succinic acid ratios in July suggested strong photochemical formation over the sampling period in summer. Based on the calculation of principle component analysis and multiple linear regression, water-soluble organic acids were mainly formed from the aerosol aging process during the sampling periods except for January, while water-soluble organic carbon (WSOC) mostly originated from combustion sources. Correlation analysis was conducted between the CO-normalized concentrations of organic acids and PM_2.5, O₃, as well as the meteorological parameters. The results suggested that gas-phase photooxidation contributed significantly to the formation of these organic acids during the entire sampling period, and the aqueous-phase process played an important role over the severe haze event in January. Our results also suggested that the intensity of photooxidation and the aging degree of SOA were enhanced along with the reduction of PM_2.5 in Beijing in recent years.

Indoor aerosol water content and phase state in U.S. residences: impacts of relative humidity, aerosol mass and composition, and mechanical system operation

Hygroscopic particulate matter (PM) constituents promote uptake of aerosol water (AW), depending on relative humidity (RH), which can constrain qualities such as organic aerosol (OA) phase state and inorganic aerosol (IA) deliquescence and efflorescence. This work provides a first incorporation of AW predictions into residential indoor PM simulations. The indoor model, IMAGES, which simulates factored OA concentrations and thermodynamics using the 2D-volatility basis set, was expanded to predict speciated IA concentrations, AW with κ-Köhler theory of hygroscopic growth, and OA phase state with glass transition temperatures. Since RH is the largest driver of AW and varies with meteorology, simulations were conducted using a database of historical ambient weather and pollution records spanning the sixteen U.S. climate zones, facilitating assessment of seasonal and regional trends. Over this diverse simulation set, the residential indoor AW mass was ∼10 to 100 times smaller than dry PM mass. This relative AW amount indoors was about ∼10 times smaller than outdoors, since indoor-emitted aerosol is likely less hygroscopic. The indoor OA phase state was typically semisolid, suggesting kinetic limitations might inhibit thermodynamic OA partitioning equilibrium from being established indoors. Residences in hot and humid climates during the summertime may have liquid indoor OA, while amorphous solid indoor OA can exist in cold climates. Deliquescence and efflorescence of recirculated IA within HVAC systems during cooling or heating, respectively, was also modeled. Oftentimes, two IA populations with different histories existing as wet or dry aerosol were generated by HVAC operation depending on indoor and outdoor environmental conditions and the HVAC operating mode.

Organic Hydroxy Acids as Highly Oxygenated Molecular (HOM) Tracers for Aged Isoprene Aerosol

Highly oxygenated molecules (HOMs) are a class of compounds associated with secondary organic aerosols exhibiting high oxygen to carbon (O:C) ratios and often originating from the oxidation of biogenic compounds. Here, the photooxidation and ozonolysis of isoprene were examined under a range of conditions to identify HOM tracers for aged isoprene aerosol. The HOM tracers were identified as silylated derivatives by gas chromatography-mass spectrometry and by detecting their parent compounds by liquid chromatography-high resolution mass spectrometry. In addition to the previously observed methyltetrols and 2-methylglyceric acid, seven tracer compounds were identified, including 2-methyltartronic acid (MTtA), 2-methylerythronic acid (2MeTrA), 3-methylerythronic acid (3MeTrA), 2-methylthreonic acid (2MTrA), 3-methylthreonic acid (3MTrA), erythro-methyltartaric acid (e-MTA), and threo-methyltartaric acid (t-MTA). The molecular structures were confirmed with authentic standards synthesized in the laboratory. The presence of some of these HOMs in the gas and particle phases simultaneously provides evidence of their gas/particle partitioning. To determine the contributions of aged isoprene products to ambient aerosols, we analyzed ambient PM2.5 samples collected in the southeastern United States in summer 2003 and at two European monitoring stations located in Zielonka and Godów (Poland). Our findings show that methyltartaric acids (MTA) and 2- and 3-methylthreonic acids (and their stereoisomers) are representative of aged isoprene aerosol because they occur both in the laboratory chamber aerosol obtained and in ambient PM2.5. On the basis of gas chromatography-mass spectrometry (GC-MS) analysis, their concentrations were found to range from 0.04 ng for 3-methylthreonic acid to 6.3 ng m-3 for methyltartaric acid at the southeast site in Duke Forest, NC, USA.

Secondary organic aerosol formation from styrene photolysis and photooxidation with hydroxyl radicals

The formation of secondary organic aerosol (SOA) generated by irradiating styrene in the presence and/or absence of OH, NOx, H₂O vapour and seed aerosol has been investigated for the first time. Experiments were conducted in a smog chamber at 298 K and atmospheric pressure. Styrene decay was measured by gas chromatography with a mass spectrometric detector (GC-MS), and the temporal evolution of the aerosol was monitored using a fast mobility particle sizer (FMPS). The SOA yield increases as the initial styrene concentration increases, leading to yields ranging from 1.8% to 3.5% for styrene photolysis, and from 2.4% to 5.0% for its photooxidation. In both cases, the organic aerosol formation can be expressed by a one-product gas/particle partitioning absorption model. The particle number concentration, mass and yield decrease in the presence of NOx and seed aerosol but increase at higher relative humidity (RH). The gas phase and SOA composition were analysed offline using a filter/denuder sampling system simultaneously collecting gas- and particle-phase products. Benzaldehyde was confirmed as the main gas-phase product of the reaction. However, although products in the particle phase were detected, they could not be identified. Moreover, the aqueous filter extracts were analysed using UV-Visible spectrophotometry to determine differences in the optical properties of SOA produced in the presence and absence of NOx. The results from this work may be used to discuss the implications of atmospheric SOA generation from styrene degradation.

Kinetics of Limonene Secondary Organic Aerosol Oxidation in the Aqueous Phase

Twenty semivolatile organic compounds that contribute to limonene secondary organic aerosol (SOA) were synthesized in the flow-tube reactor. Kinetics of the aqueous-phase oxidation of the synthesized compounds by hydroxyl radicals (OH) and ozone (O₃) were investigated at 298 ± 2 K using the relative rate method. Oxidized organic compounds identified as the major components of limonene SOA were quantified with liquid chromatography coupled to the electrospray ionization and quadrupole tandem mass spectrometry (LC-ESI/MS/MS). The bimolecular rate coefficients measured for the oxidation products of limonene are k_OH = 2-5 × 10⁹ M^-1 s^-1 for saturated and k_OH = 1-2 × 10¹⁰ M^-1 s^-1 for unsaturated compounds. Ozonolysis reaction bimolecular rate coefficients obtained for the unsaturated compounds in the aqueous phase are between 2 and 6 × 10⁴ M^-1 s^-1. The results obtained in this work also indicate that oxidation of limonene carboxylic acids by OH was about a factor of 2 slower for the carboxylate ions than for the protonated acids while the opposite was true for the ozonolysis. The data acquired provided new insights into kinetics of the limonene SOA processing in the aqueous phase. Ozonolysis of limonene SOA also increased the concentration of dimers, most likely due to reactions of the stabilized Criegee intermediates with the other, stable products. These results indicate that aqueous-phase oxidation of limonene SOA by OH and O₃ will be relevant in clouds, fogs, and wet aerosols.

Limononic Acid Oxidation by Hydroxyl Radicals and Ozone in the Aqueous Phase

Kinetics and mechanism of limononic acid (3-isopropenyl-6-oxoheptanoic acid, LA) oxidation by hydroxyl radicals (OH) and ozone (O₃) were studied in the aqueous phase at 298 ± 2 K. These reactions were investigated using liquid chromatography coupled to the electrospray ionization and quadrupole tandem mass spectrometry (LC-ESI/MS/MS). The rate coefficients determined for LA + OH reaction were: 1.3 ± 0.3 × 10¹⁰ M^-1 s^-1 at pH = 2 and 5.7 ± 0.6 × 10⁹ M^-1 s^-1 at pH = 10. The rate coefficient determined for LA ozonolysis was 4.2 ± 0.2 × 10⁴ M^-1 s^-1 at pH = 2. The calculated Henry's law constant (H) for LA was ca. 6.3 × 10⁶ M × atm^-1, thereby indicating that in fogs and clouds with LWC = 0.3-0.5 g × m^-3 LA will reside entirely in the aqueous phase. Calculated atmospheric lifetimes due to reaction with OH and O₃ strongly indicate that aqueous-phase oxidation can be important for LA under realistic atmospheric conditions. Under acidic conditions, the aqueous-phase oxidation of LA by OH will dominate over reaction with O₃, whereas the opposite is more likely when pH ≥ 4.5. The aqueous-phase oxidation of LA produced keto-limononic acid and a number of low-volatility products, such as hydroperoxy-LA and α-hydroxyhydroperoxides.

Smog induces oxidative stress and microbiota disruption

Smog is created through the interactions between pollutants in the air, fog, and sunlight. Air pollutants, such as carbon monoxide, heavy metals, nitrogen oxides, ozone, sulfur dioxide, volatile organic vapors, and particulate matters, can induce oxidative stress in human directly or indirectly through the formation of reactive oxygen species. The outermost boundary of human skin and mucous layers are covered by a complex network of human-associated microbes. The relation between these microbial communities and their human host are mostly mutualistic. These microbes not only provide nutrients, vitamins, and protection against other pathogens, they also influence human’s physical, immunological, nutritional, and mental developments. Elements in smog can induce oxidative stress to these microbes, leading to community collapse. Disruption of these mutualistic microbiota may introduce unexpected health risks, especially among the newborns and young children. Besides reducing the burning of fossil fuels as the ultimate solution of smog formation, advanced methods by using various physical, chemical, and biological means to reduce sulfur and nitrogen contains in fossil fuels could lower smog formation. Additionally, information on microbiota disruption, based on functional genomics, culturomics, and general ecological principles, should be included in the risk assessment of prolonged smog exposure to the health of human populations.

Constraints on primary and secondary particulate carbon sources using chemical tracer and 14C methods during CalNex-Bakersfield

The present study investigates primary and secondary sources of organic carbon for Bakersfield, CA, USA as part of the 2010 CalNex study. The method used here involves integrated sampling that is designed to allow for detailed and specific chemical analysis of particulate matter (PM) in the Bakersfield airshed. To achieve this objective, filter samples were taken during thirty-four 23-hr periods between 19 May and 26 June 2010 and analyzed for organic tracers by gas chromatography - mass spectrometry (GC-MS). Contributions to organic carbon (OC) were determined by two organic tracer-based techniques: primary OC by chemical mass balance and secondary OC by a mass fraction method. Radiocarbon (14C) measurements of the total organic carbon were also made to determine the split between the modern and fossil carbon and thereby constrain unknown sources of OC not accounted for by either tracer-based attribution technique. From the analysis, OC contributions from four primary sources and four secondary sources were determined, which comprised three sources of modern carbon and five sources of fossil carbon. The major primary sources of OC were from vegetative detritus (9.8%), diesel (2.3%), gasoline (<1.0%), and lubricating oil impacted motor vehicle exhaust (30%); measured secondary sources resulted from isoprene (1.5%), α-pinene (<1.0%), toluene (<1.0%), and naphthalene (<1.0%, as an upper limit) contributions. The average observed organic carbon (OC) was 6.42 ± 2.33 μgC m-3. The 14C derived apportionment indicated that modern and fossil components were nearly equivalent on average; however, the fossil contribution ranged from 32-66% over the five week campaign. With the fossil primary and secondary sources aggregated, only 25% of the fossil organic carbon could not be attributed. Whereas, nearly 80% of the modern carbon could not be attributed to primary and secondary sources accessible to this analysis, which included tracers of biomass burning, vegetative detritus and secondary biogenic carbon. The results of the current study contributes source-based evaluation of the carbonaceous aerosol at CalNex Bakersfield.

Organic aerosol molecular composition and gas-particle partitioning coefficients at a Mediterranean site (Corsica)

Molecular speciation of atmospheric organic matter was investigated during a short summer field campaign performed in a citrus fruit field in northern Corsica (June 2011). Aimed at assessing the performance on the field of newly developed analytical protocols, this work focuses on the molecular composition of both gas and particulate phases and provides an insight into partitioning behavior of the semi-volatile oxygenated fraction. Limonene ozonolysis tracers were specifically searched for, according to gas chromatography-mass spectrometry (GC-MS) data previously recorded for smog chamber experiments. A screening of other oxygenated species present in the field atmosphere was also performed. About sixty polar molecules were positively or tentatively identified in gas and/or particle phases. These molecules comprise a wide range of branched and linear, mono and di-carbonyls (C3-C7), mono and di-carboxylic acids (C3-C18), and compounds bearing up to three functionalities. Among these compounds, some can be specifically attributed to limonene oxidation and others can be related to α- or β-pinene oxidation. This provides an original snapshot of the organic matter composition at a Mediterranean site in summer. Furthermore, for compounds identified and quantified in both gaseous and particulate phases, an experimental gas/particle partitioning coefficient was determined. Several volatile products, which are not expected in the particulate phase assuming thermodynamic equilibrium, were nonetheless present in significant concentrations. Hypotheses are proposed to explain these observations, such as the possible aerosol viscosity that could hinder the theoretical equilibrium to be rapidly reached.

PM2.5 source apportionment with organic markers in the Southeastern Aerosol Research and Characterization (SEARCH) study

Positive matrix factorization (PMF) and effective variance (EV) solutions to the chemical mass balance (CMB) were applied to PM(2.5) (particulate matter with an aerodynamic diameter <2.5 μm) mass and chemically speciated measurements for samples taken from 2008 to 2010 at the Atlanta, Georgia, and Birmingham, Alabama, sites. Commonly measured PM(2.5) mass, elemental, ionic, and thermal carbon fraction concentrations were supplemented with detailed nonpolar organic speciation by thermal desorption-gas chromatography/mass spectrometry (TD-GC/MS). Source contribution estimates were calculated for motor vehicle exhaust, biomass burning, cooking, coal-fired power plants, road dust, vegetative detritus, and secondary sulfates and nitrates for Atlanta. Similar sources were found for Birmingham, with the addition of an industrial source and the separation of biomass burning into open burning and residential wood combustion. EV-CMB results based on conventional species were qualitatively similar to those estimated by PMF-CMB. Secondary ammonium sulfate was the largest contributor, accounting for 27-38% of PM(2.5), followed by biomass burning (21-24%) and motor vehicle exhaust (9-24%) at both sites, with 4-6% of PM(2.5) attributed to coal-fired power plants by EV-CMB. Including organic compounds in the EV-CMB reduced the motor vehicle exhaust and biomass burning contributions at both sites, with a 13-23% deficit for PM(2.5) mass. The PMF-CMB solution showed mixing of sources within the derived factors, both with and without the addition of speciated organics, as is often the case with complex source mixtures such as those at these urban-scale sites. The nonpolar TD-GC/MS compounds can be obtained from existing filter samples and are a useful complement to the elements, ions, and carbon fractions. However, they should be supplemented with other methods, such as TD-GC/MS on derivitized samples, to obtain a wider range of polar compounds such as sterols, sugars, and organic acids. The PMF and EV solutions to the CMB equations are complementary to, rather than replacements for, each other, as comparisons of their results reveal uncertainties that are not otherwise evident.

IMPLICATIONS

Organic markers can be measured on currently acquired PM(2.5) filter samples by thermal methods. These markers can complement element, ion, and carbon fraction measurements from long-term speciation networks. Applying the positive matrix factorization and effective variance solutions for the chemical mass balance equations provides useful information on the accuracy of the source contribution estimates. Nonpolar compounds need to be complemented with polar compounds to better apportion cooking and secondary organic aerosol contributors.

Real-Time Analysis of Ambient Organic Aerosols Using Aerosol Flowing Atmospheric-Pressure Afterglow Mass Spectrometry (AeroFAPA-MS)

Organic compounds contribute to a major fraction of atmospheric aerosols and have significant impacts on climate and human health. However, because of their chemical complexity, their measurement remains a major challenge for analytical instrumentation. Here we present the development and characterization of a new soft ionization technique that allows mass spectrometric real-time detection of organic compounds in aerosols. The aerosol flowing atmospheric-pressure afterglow (AeroFAPA) ion source is based on a helium glow discharge plasma, which generates excited helium species and primary reagent ions. Ionization of the analytes occurs in the afterglow region after thermal desorption and produces mainly intact quasimolecular ions, facilitating the interpretation of the acquired mass spectra. We illustrate that changes in aerosol composition and concentration are detected on the time scale of seconds and in the ng m(-3) range. Additionally, the successful application of AeroFAPA-MS during a field study in a mixed forest region is presented. In general, the observed compounds are in agreement with previous offline studies; however, the acquisition of chemical information and compound identification is much faster. The results demonstrate that AeroFAPA-MS is a suitable tool for organic aerosol analysis and reveal the potential of this technique to enable new insights into aerosol formation, growth, and transformation in the atmosphere.

Ultrafine particle emissions from essential-oil-based mosquito repellent products

Ultrafine particle (UFP) emissions from three essential-oil-based mosquito repellent products (lemon eucalyptus (LE), natural insects (NI), and bite shield (BS)) were tested in a 386 l chamber at a high air exchange rate of 24/h with filtered laboratory air. Total particle number concentration and size distribution were monitored by a condensation particle counter and a scanning mobility particle sizer, respectively. UFPs were emitted from all three products under indoor relevant ozone concentrations (~ 17 ppb). LE showed a nucleation burst followed by a relatively stable and continuous emission while the other two products (NI and BS) showed episodic emissions. The estimated maximum particle emission rate varied from 5.4 × 10(9) to 1.2 × 10(12) particles/min and was directly related to the dose of mosquito repellent used. These rates are comparable to those due to other indoor activities such as cooking and printing. The emission duration for LE lasted for 8-78 min depending on the dose applied while the emission duration for NI and BS lasted for 2-3 h.

PRACTICAL IMPLICATIONS

Certain essential-oil-based mosquito repellents can produce high concentrations of UFPs when applied, even at low ozone levels. Household and personal care products that contain essential oil may need to be tested at indoor relevant ozone levels to determine their potential to increase personal UFP exposures.

Glyoxal induced atmospheric photosensitized chemistry leading to organic aerosol growth

In recent years, it has been proposed that gas phase glyoxal could significantly contribute to ambient organic aerosol (OA) mass through multiphase chemistry. Of particular interest is the reaction between glyoxal and ammonium cations producing light-absorbing compounds such as imidazole derivatives. It was recently shown that imidazole-2-carboxaldehyde (IC) can act as a photosensitizer, initiating aerosol growth in the presence of gaseous volatile organic compounds. Given the potential importance of this new photosensitized growth pathway for ambient OA, the related reaction mechanism was investigated at a molecular level. Bulk and flow tube experiments were performed to identify major products of the reaction of limonene with the triplet state of IC by direct (±)ESI-HRMS and UPLC/(±)HESI-HRMS analysis. Detection of recombination products of IC with limonene or with itself, in bulk and flow tube experiments, showed that IC is able to initiate a radical chemistry in the aerosol phase under realistic irradiation conditions. Furthermore, highly oxygenated limonene reaction products were detected, clearly explaining the observed OA growth. The chemistry of peroxy radicals derived from limonene upon addition of oxygen explains the formation of such low-volatile compounds without any traditional gas phase oxidant.

A significant role for nitrate and peroxide groups on indoor secondary organic aerosol

This paper reports indoor secondary organic aerosol, SOA, composition based on the results from an improved model for indoor air chemistry. The model uses a detailed chemical mechanism that is near-explicit to describe the gas-phase degradation of relevant indoor VOC species. In addition, gas-to-particle partitioning is included for oxygenated products formed from the degradation of limonene, the most ubiquitous terpenoid species in the indoor environment. The detail inherent in the chemical mechanism permits the indoor SOA composition to be reported in greater detail than currently possible using experimental techniques. For typical indoor conditions in the suburban UK, SOA concentrations are ~1 μg m(-3) and dominated by nitrated material (~85%), with smaller contributions from peroxide (12%), carbonyl (3%), and acidic (1%) material. During cleaning activities, SOA concentrations can reach 20 μg m(-3) with the composition dominated by peroxide material (73%), with a smaller contribution from nitrated material (21%). The relative importance of these different moieties depends crucially (in order) on the outdoor concentration of O(3), the deposition rates employed and the scaling factor value applied to the partitioning coefficient. There are currently few studies that report observation of aerosol composition indoors, and most of these have been carried out under conditions that are not directly relevant. This study highlights the need to investigate SOA composition in real indoor environments. Further, there is a need to measure deposition rates for key indoor air species on relevant indoor surfaces and to reduce the uncertainties that still exist in gas-to-particle phase parametrization for both indoor and outdoor air chemistry models.

Use of denuder/filter apparatus to investigate terpene ozonolysis

A denuder/filter apparatus was used to collect the gaseous and particulate reaction products from ozonlysis of α-pinene, limonene and α-terpineol in an effort to develop sampling techniques for characterizing indoor environment chemistry. Carboxylic acids found in the particulate phase were derivatized to 2,2,2-trifuoroethylamides by reaction with 3-ethyl-1-[3-(dimethylamino)propyl]carbodiimide hydrochloride (EDC) and 2,2,2-trifluoroethylamine hydrochloride (TFEA). Carbonyl compounds collected in both gas phase and particulate phase were derivatized to their respective oximes by reaction with O-(2,3,4,5,6-pentafluoro-benzyl)hydroxylamine hydrochloride (PFBHA). The ozonolysis of α-pinene yielded the carboxylic acids: cis-pinonic acid and pinic acid and the proposed carboxylic acids methanetricarboxylic acid and terpenylic acid; the carbonyls: 4-oxopentanal, norpinonaldehyde, pinon aldehyde and the proposed carbonyl methylidenepropanedial. The ozonolysis of limonene yielded the carboxylic acids: limonic acid and pinic acid and the carbonyls: 1-(4-methylcyclohex-3-en-1-yl)ethanone (4AMCH), glyoxal, methyl glyoxal, 4-oxopentanal and 6-oxo-3-(prop-1-en-2-yl)heptanal (IPOH). The ozonolysis of α-terpineol yielded the proposed carboxylic acids: terpenylic acid and homoterpenylic acid and the carbonyls: (5E)-6-hydroxyhept-5-en-2-one, methyl glyoxal and 4-oxopentanal.

Enhancement effect of relative humidity on the formation and regional respiratory deposition of secondary organic aerosol

In this study, we investigated the effect of relative humidity (RH) on the formation of secondary organic aerosol (SOA) generated from the ozonolysis of d-limonene in an environmental chamber. The mass yield and the number concentration of SOA increased seven and eight times, respectively, when the RH increased from 18% to 82%. The measured total loss rates (apparent loss rates) of the number and mass concentration of SOA in the chamber ranged from 1.70 to 1.77 h(-1) and from 2.51 to 2.61 h(-1), respectively, at a controlled ventilation rate of 0.72±0.04 h(-1). The wall-deposition-loss-rate coefficient observed (1.00±0.02 h(-1)) was approximate to the estimated value based on Zhao and Wu's model which includes the factors of turbulence, Brownian diffusion, turbophoresis and surface roughness. According to the ICRP (International Commission on Radiological Protection) model, the inhaled SOA particles are deposited primarily in the alveoli of the lung. The integrated alveolar deposited dose of the mass (surface area) of SOA over 3h accounted for 74.0-74.8% (74.3-74.9%) of the total deposited dose at the investigated RH. Raising the RH resulted in the growth of SOA particle sizes and increment of the deposition dose but did not cause significant changes in the ratio of regional to the total respiratory deposition of SOA.

The use of polar organic compounds to estimate the contribution of domestic solid fuel combustion and biogenic sources to ambient levels of organic carbon and PM2.5 in Cork Harbour, Ireland

PM(2.5) samples collected at Cork Harbour, Ireland during summer, autumn, late autumn and winter, 2008-2009 were analyzed for polar organic compounds that are useful markers for aerosol source characterization. The determined compounds include tracers for biomass burning primary particles, fungal spores, markers for secondary organic aerosol (SOA) from isoprene, α-/β-pinene, and d-limonene. Seasonal and temporal variations and other characteristic features of the detected tracers are discussed in terms of aerosol sources and processes. The biogenic species were detected only during the summer period where the contributions of isoprene SOA and fungal spores to the PM(2.5) organic carbon (OC) were estimated to be 1.6% and 1% respectively. The biomass burning markers, and in particular levoglucosan, were present in all samples and attributed to the combustion of cellulose-containing fuels including wood, peat, bituminous and smokeless coal. The contribution of domestic solid fuel (DSF) burning to the measured OC mass concentration was estimated at 10.8, 50, 66.4 and 74.9% for summer, autumn, late autumn and winter periods, respectively, based on factors derived from a series of burning experiments on locally available fuels. Application of an alternative approach, namely principal component analysis-multiple linear regression (PCA-MLR), to the measured concentrations of the polar organic marker compounds used in conjunction with real-time air quality data provided similar trends and estimates for DSF combustion during all seasons except summer. This study clearly demonstrates that, despite the ban on the sale of bituminous coal in Cork and other large urban areas in Ireland, DSF combustion is still the major source of OC during autumn and winter periods and also makes a significant contribution to PM(2.5) levels. The developed marker approach for estimating the contribution of DSF combustion to ambient OC concentrations can, in principle, also be applied to other locations.

Mass spectrometric characterization of isomeric terpenoic acids from the oxidation of α-pinene, β-pinene, d-limonene, and Δ3-carene in fine forest aerosol

In this study, we present liquid chromatographic and mass spectral data for predominant terpenoic acids formed through oxidation of α-pinene, β-pinene, d-limonene, and Δ(3)-carene that occur in fine forest aerosol from K-puszta, Hungary, a rural site with coniferous vegetation. Characterization of these secondary organic aerosol tracers in fine ambient aerosol is important because it allows one to gain information on monoterpene precursors and source processes such as oxidation and aging processes. The mass spectral data were obtained using electrospray ionization in the negative ion mode, accurate mass measurements, and linear ion trap tandem mass spectrometric experiments. Emphasis is given to the mass spectrometric differentiation of isobaric terpenoic acids, such as, e.g. the molecular weight (MW) 186 terpenoic acids, cis-pinic, cis-caric, homoterpenylic, ketolimononic, and limonic acids. Other targeted isobaric terpenoic acids are the MW 184 terpenoic acids, cis-pinonic and cis-caronic acids, and the MW 204 tricarboxylic acids, 3-methyl-1,2,3-butanetricarboxylic and 3-carboxyheptanedioic acids. Fragmentation pathways are proposed to provide a rational explanation for the observed isomeric differences and/or to support the suggested tentative structures. For the completeness of the data set, data obtained for recently reported lactone-containing terpenoic acids (i.e. terpenylic and terebic acids), related or isobaric compounds (i.e. norpinic acid, diaterpenylic acid acetate, and unknown MW 188 compounds) are also included, the rationale being that other groups working on this topic could use this data compilation as a reference.

Characterization of atmospheric aerosols at a forested site in central Europe

Mass concentrations, mass size distributions, time series, and diel variations for organic tracers and major inorganic ions in aerosols from K-puszta, Hungary, during a 2003 summer period are reported. Emphasis was placed on alpha-beta-pinene secondary organic aerosol (SOA) tracers comprising cis-pinic acid, 3-hydroxyglutaric acid, and 3-methyl-1,2,3-butanetricarboxylic acid. Only cis-pinic acid and the d-limonene SOA tracer 3-carboxyheptanedioic acid exhibited diel variations with highest concentrations at night Malic acid was fairly well correlated with succinic and oxalic acid, pointing to a similar SOA formation process. No day-night variations were observed for the latter acids, suggesting that they are formed over relatively longtime scales. Of the ionic species sulfate, ammonium, and nitrate, only nitrate showed clear diel variations with highest concentrations at night. As to the size-segregated samples, the 2-methyltetrols were present in both the fine and coarse modes, while the C5-alkene triols and the alpha-/beta-pinene SOA tracers were only associated with the fine mode. The ionic species sulfate, ammonium, and nitrate made up for, on average, 24, 10, and 26% of the PM2.5 mass, while organic matter was responsible for 47% of that mass. Isoprene and alpha-pinene secondary organic carbon (SOC) accounted, on average, for, respectively, 6.8 and at least 4.8% of the PM2.5 organic carbon, but the contribution of isoprene SOC was more pronounced during daytime (9.6%), whereas that of alpha-pinene SOC was largest at night (at least 6.0%).

Spatial and seasonal trends in biogenic secondary organic aerosol tracers and water-soluble organic carbon in the southeastern United States

Twenty-four hour integrated filter samples of fine particulate matter (PM2.5) were collected from May 2004 to April 2005 at one rural site and three urban sites located in the southeastern United States. Filters were extracted and analyzed for both biogenic secondary organic aerosol (SOA) tracers via gas chromatography-mass spectrometry (GC-MS), and water-soluble organic carbon (WSOC) concentrations. The tracers reported in this study include isoprene-derived 2-methylthreitol and 2-methylerythritol, as well as pinene-derived cis-pinonic acid. The mean ambient concentrations ranged from 21.7 to 94.3 ng/m3, 5.31 to 17.9 ng/m3, and 1.87 to 3.18 microgC/m3 for 2-methyltetrols (sum of 2-methylerythritol and 2-methylthreitol), cispinonic acid and WSOC, respectively. Distinct spatial distributions were observed for all tracers with the highest concentration at the rural site and the lowest level at a coastal site. Although 2-methyltetrols were small fractions of WSOC, varying from 0.35% at an urban site to highest fractions of 1.09% at the rural site, WSOC exhibited significant correlation with 2-methyltetrols during summer, suggesting isoprene SOA makes an important contribution to WSOC. 2-Methyltetrols had the highest concentrations during the summer,when high temperature, intense solar radiation, and high ozone level occurred. However, no obvious seasonal variation was found for cispinonic acid. Between inland sites WSOC was more spatially homogeneous than the 2-methyltetrols, suggesting that WSOC was produced from a variety of mechanisms.

Release of isoprene and monoterpenes during the aerobic decomposition of orange wastes from laboratory incubation experiments

The release of isoprene and 12 monoterpenes during the decomposition of orange wastes was studied under controlled aerobic conditions in laboratory for a period of 2 months. Monoterpenes (mainly limonene, beta-myrcene, sabinene, and alpha-pinene) dominated among the released volatile organic compounds, but isoprene was only a very minor constituent. Two time windows with peak microbial activity were indicated by CO2 emission fluxes and waste temperature, both of which reached their maximums 3-4 days and 15-20 days after the incubation, respectively. Although isoprene had only one emission peak synchronizing with the first peak microbial activity, monoterpenes had relatively high emission rates, but they decreased at the beginning without correlation to the first peak of microbial activity, due largely to direct volatilization of these monoterpenes primarily present in orange substrates as inherited constituents. However, after the initial decrease the emission rates of monoterpenes rose again in conjunction with the second peak of microbial activity, indicating secondary production of these monoterpenes through microbial activity. On the basis of monitored emission fluxes, the amounts of secondarily formed monoterpenes from microbial activity well surpassed those inherited in the orange wastes. Production of total terpenes reached 1.10 x 10(4) mg kg(-1) (dry weight), of which limonene alone was 63%. For either limonene or total terpenes, about 95% of their emission occurred in the first 30 days, implying that organic wastes might give off considerable amount of terpenes during early disposal under aerobic conditions before the conventional anaerobic landfilling, and emission measurements just in landfills might underestimate the waste-related emissions of reactive organic gases.

Primary and secondary contributions to ambient PM in the midwestern United States

Ambient PM2.5 samples were collected in five midwestern United States cities throughout 2004: East St. Louis, Illinois; Detroit Michigan; Cincinnati, Ohio; Bondville, Illinois; and Northbrook, Illinois. Monthly composites were analyzed using chemical derivatization coupled with GC-MS analysis to estimate the contributions of several sources to the total ambient organic carbon. A chemical mass balance (CMB) approach was used to estimate contributions from several primary sources. An additional, organic tracer-based technique was employed to estimate secondary contributions, including secondary organic carbon derived from isoprene, alpha-pinene, beta-caryophyllene, and toluene. The sum of these contributions was compared with the total organic carbon measured at each sampling site, and reasonable carbon mass balances were observed for four of the five sites. In Bondville, Northbrook, Cincinnati, and Detroit a strong correlation was observed between the sum of the estimated primary and secondary contributions and the measured organic carbon (R2 = 0.73). The estimated secondary organic carbon concentrations were observed to vary considerably with season, with the strongest contributions coming from isoprene and alpha-pinene during the summer. While further research is required, there is some evidence that the contribution estimates for alpha-pinene, beta-caryophyllene, and toluene SOC may to some degree represent the contributions from the broader classes of monoterpenes, sesquiterpenes, and aromatics.

Effect of acidity on secondary organic aerosol formation from isoprene

The effect of particle-phase acidity on secondary organic aerosol (SOA) formation from isoprene is investigated in a laboratory chamber study, in which the acidity of the inorganic seed aerosol was controlled systematically. The observed enhancement in SOA mass concentration is closely correlated to increasing aerosol acidity (R2 = 0.979). Direct chemical evidence for acid-catalyzed particle-phase reactions was obtained from the SOA chemical analyses. Aerosol mass concentrations for the 2-methyltetrols, as well as the newly identified sulfate esters, both of which serve as tracers for isoprene SOA in ambient aerosols, increased significantly with enhanced aerosol acidity. Aerosol acidities, as measured in nmol of H+ m(-3), employed in the present study are in the same range as those observed in tropospheric aerosol collected from the eastern U.S.