Toxic effects of single-walled carbon nanotubes in the development of E. coli biofilm

Interface properties of nanostructured carbon-coated biological implants: an overview

The interfaces between medical implants and living tissues are of great complexity because of the simultaneous occurrence of a wide variety of phenomena. The engineering of implant surfaces represents a crucial challenge in material science, but the further improvement of implant properties remains a critical task. It can be achieved through several processes. Among them, the production of specialized coatings based on carbon-based materials stands very promising. The use of carbon coatings allows one to simultaneously fine-tune tribological, mechanical, and chemical properties. Here, we review applications of nanostructured carbon coatings (nanodiamonds, carbon nanotubes, and graphene-related materials) for the improvement of the overall properties of medical implants. We are focusing on biological interactions, improved corrosion resistance, and overall mechanical properties, trying to provide a complete overview within the field.

Low-dose zinc oxide nanoparticles trigger the growth and biofilm formation of Pseudomonas aeruginosa: a hormetic response

INTRODUCTION

Hormesis describes an inverse dose-response relationship, whereby a high dose of a toxic compound is inhibitory, and a low dose is stimulatory. This study explores the hormetic response of low concentrations of zinc oxide nanoparticles (ZnO NPs) toward Pseudomonas aeruginosa.

METHOD

Samples of P. aeruginosa, i.e. the reference strain, ATCC 27,853, together with six strains recovered from patients with cystic fibrosis, were exposed to ten decreasing ZnO NPs doses (0.78-400 µg/mL). The ZnO NPs were manufactured from Peganum harmala using a chemical green synthesis approach, and their properties were verified utilizing X-ray diffraction and scanning electron microscopy. A microtiter plate technique was employed to investigate the impact of ZnO NPs on the growth, biofilm formation and metabolic activity of P. aeruginosa. Real-time polymerase chain reactions were performed to determine the effect of ZnO NPs on the expression of seven biofilm-encoding genes.

RESULT

The ZnO NPs demonstrated concentration-dependent bactericidal and antibiofilm efficiency at concentrations of 100-400 µg/mL. However, growth was significantly stimulated at ZnO NPs concentration of 25 µg/mL (ATCC 27853, Pa 3 and Pa 4) and at 12.5 µg/mL and 6.25 µg/mL (ATCC 27853, Pa 2, Pa 4 and Pa 5). No significant positive growth was detected at dilutions < 6.25 µg/mL. similarly, biofilm formation was stimulated at concentration of 12.5 µg/mL (ATCC 27853 and Pa 1) and at 6.25 µg/mL (Pa 4). At concentration of 12.5 µg/mL, ZnO NPs upregulated the expression of LasB ( ATCC 27853, Pa 1 and Pa 4) and LasR and LasI (ATCC 27853 and Pa 1) as well as RhII expression (ATCC 27853, Pa 2 and Pa 4).

CONCLUSION

When exposed to low ZnO NPs concentrations, P. aeruginosa behaves in a hormetic manner, undergoing positive growth and biofilm formation. These results highlight the importance of understanding the response of P. aeruginosa following exposure to low ZnO NPs concentrations.

Long-term continuous degradation of carbon nanotubes by a bacteria-driven Fenton reaction

Very few bacteria are known that can degrade carbon nanotubes (CNTs), and the only known degradation mechanism is a Fenton reaction driven by Labrys sp. WJW with siderophores, which only occurs under iron-deficient conditions. No useful information is available on the degradation rates or long-term stability and continuity of the degradation reaction although several months or more are needed for CNT degradation. In this study, we investigated long-term continuous degradation of oxidized (carboxylated) single-walled CNTs (O-SWCNTs) using bacteria of the genus Shewanella. These bacteria are widely present in the environment and can drive the Fenton reaction by alternating anaerobic-aerobic growth conditions under more general environmental conditions. We first examined the effect of O-SWCNTs on the growth of S. oneidensis MR-1, and it was revealed that O-SWCNTs promote growth up to 30 μg/mL but inhibit growth at 40 μg/mL and above. Then, S. oneidensis MR-1 was subjected to incubation cycles consisting of 21-h anaerobic and 3-h aerobic periods in the presence of 30 μg/mL O-SWCNTs and 10 mM Fe(III) citrate. We determined key factors that help prolong the bacteria-driven Fenton reaction and finally achieved long-term continuous degradation of O-SWCNTs over 90 d. By maintaining a near neutral pH and replenishing Fe(III) citrate at 60 d, a degraded fraction of 56.3% was reached. S. oneidensis MR-1 produces Fe(II) from Fe(III) citrate, a final electron acceptor for anaerobic respiration during the anaerobic period. Then, ·OH is generated through the Fenton reaction by Fe(II) and H2O2 produced by MR-1 during the aerobic period. ·OH was responsible for O-SWCNT degradation, which was inhibited by scavengers of H2O2 and ·OH. Raman spectroscopy and X-ray photoelectron spectroscopy showed that the graphitic structure in O-SWCNTs was oxidized, and electron microscopy showed that long CNT fibers initially aggregated and became short and isolated during degradation. Since Shewanella spp. and iron are ubiquitous in the environment, this study suggests that a Fenton reaction driven by this genus is applicable to the degradation of CNTs under a wide range of conditions and will help researchers develop novel methods for waste treatment and environmental bioremediation against CNTs.

Exploring Nitrogen-Functionalized Graphene Composites for Urinary Catheter Applications

Graphene has been broadly studied, particularly for the fabrication of biomedical devices, owing to its physicochemical and antimicrobial properties. In this study, the antibiofilm efficacy of graphene nanoplatelet (GNP)-based composites as coatings for urinary catheters (UCs) was investigated. GNPs were functionalized with nitrogen (N-GNP) and incorporated into a polydimethylsiloxane (PDMS) matrix. The resulting materials were characterized, and the N-GNP/PDMS composite was evaluated against single- and multi-species biofilms of Staphylococcus aureus, Pseudomonas aeruginosa, and Klebsiella pneumoniae. Both biofilm cell composition and structure were analyzed. Furthermore, the antibacterial mechanisms of action of N-GNP were explored. The N-GNP/PDMS composite showed increased hydrophobicity and roughness compared to PDMS. In single-species biofilms, this composite significantly reduced the number of S. aureus, P. aeruginosa, and K. pneumoniae cells (by 64, 41, and 29%, respectively), and decreased S. aureus biofilm culturability (by 50%). In tri-species biofilms, a 41% reduction in total cells was observed. These results are aligned with the outcomes of the biofilm structure analysis. Moreover, N-GNP caused changes in membrane permeability and triggered reactive oxygen species (ROS) synthesis in S. aureus, whereas in Gram-negative bacteria, it only induced changes in cell metabolism. Overall, the N-GNP/PDMS composite inhibited biofilm development, showing the potential of these carbon materials as coatings for UCs.

Can Graphene Pave the Way to Successful Periodontal and Dental Prosthetic Treatments? A Narrative Review

Graphene, as a promising material, holds the potential to significantly enhance the field of dental practices. Incorporating graphene into dental materials imparts enhanced strength and durability, while graphene-based nanocomposites offer the prospect of innovative solutions such as antimicrobial dental implants or scaffolds. Ongoing research into graphene-based dental adhesives and composites also suggests their capacity to improve the quality and reliability of dental restorations. This narrative review aims to provide an up-to-date overview of the application of graphene derivatives in the dental domain, with a particular focus on their application in prosthodontics and periodontics. It is important to acknowledge that further research and development are imperative to fully explore the potential of graphene and ensure its safe use in dental practices.

Microbial Biofilms: Applications, Clinical Consequences, and Alternative Therapies

Biofilms are complex communities of microorganisms that grow on surfaces and are embedded in a matrix of extracellular polymeric substances. These are prevalent in various natural and man-made environments, ranging from industrial settings to medical devices, where they can have both positive and negative impacts. This review explores the diverse applications of microbial biofilms, their clinical consequences, and alternative therapies targeting these resilient structures. We have discussed beneficial applications of microbial biofilms, including their role in wastewater treatment, bioremediation, food industries, agriculture, and biotechnology. Additionally, we have highlighted the mechanisms of biofilm formation and clinical consequences of biofilms in the context of human health. We have also focused on the association of biofilms with antibiotic resistance, chronic infections, and medical device-related infections. To overcome these challenges, alternative therapeutic strategies are explored. The review examines the potential of various antimicrobial agents, such as antimicrobial peptides, quorum-sensing inhibitors, phytoextracts, and nanoparticles, in targeting biofilms. Furthermore, we highlight the future directions for research in this area and the potential of phytotherapy for the prevention and treatment of biofilm-related infections in clinical settings.

Remediation of environmental toxicants using carbonaceous materials: opportunity and challenges

Adsorption and photocatalytic properties of carbonaceous materials, viz., carbon nanotubes (CNTs), fullerene, graphene, graphene oxide, carbon nanofiber nanospheres, and activated carbon, are the legitimate weapons for the remediation of emerging and persistent inorganic/organic contaminants, heavy metals, and radionucleotides from the environment. High surface area, low or non-toxic nature, ease of synthesis, regeneration, and chemical modification of carbonaceous material make them ideal for the removal of toxicants. The research techniques investigated during the last decade for the elimination of environmental toxicants using carbonaceous materials are reviewed to offer comprehensive insight into the mechanism, efficiency, applications, advantages, and shortcomings. Opportunities and challenges associated with carbon materials have been discussed to suggest future perspectives in the remediation of environmental toxicants.

Oxidative Stress Response and E. coli Biofilm Formation under the Effect of Pristine and Modified Carbon Nanotubes

The article investigates the expression of oxyR and soxS oxidative stress genes in E. coli under the effect of pristine multi-walled carbon nanotubes (MWCNTs) and pristine single-walled carbon nanotubes (SWCNTs), MWCNTs and SWCNTs functionalized with carboxyl groups (MWCNTs-COOH and SWCNTs-COOH, respectively), SWCNTs functionalized with amino groups (SWCNTs-NH₂) and SWCNTs functionalized with octadecylamine (SWCNTs-ODA). Significant differences were found in the expression of the soxS gene, while no changes were observed in the expression level of the oxyR gene. The pro-oxidant effect of SWCNTs, SWCNTs-COOH, SWCNTs-NH₂, and SWCNTs-ODA is presented, and the contrary antioxidant effect of pristine MWCNTs and MWCNTs-COOH in the presence of methyl viologen hydrate (paraquat) is shown. The article shows that SWCNTs-COOH, SWCNTs-NH₂, and SWCNTs-ODA added to the medium generate the production of reactive oxygen species (ROS) in bacterial cells. SWCNTs-COOH intensified the E. coli biofilm formation, and the biofilm biomass exceeded the control by 25 times. Additionally, it is shown that the rpoS expression increased in response to MWCNTs-COOH and SWCNTs-COOH, and the effect of SWCNTs-COOH was more significant. SWCNTs-COOH and SWCNTs-NH₂ initiated an increase in ATP concentration in the planktonic cells and a decrease in the biofilm cells. The atomic force microscopy (AFM) method showed that the volume of E. coli planktonic cells after the exposure to carbon nanotubes (CNTs) decreased compared to that without exposure, mainly due to a decrease in cell height. The absence of a strong damaging effect of functionalized SWCNTs on E. coli K12 cells, both in suspension and in biofilms, is shown. Contact with functionalized SWCNTs initiated the aggregation of the polymeric substances of the biofilms; however, the cells did not lyse. Among the studied CNTs, SWCNTs-COOH caused an increased expression of the soxS and rpoS, the formation of ROS, and stimulation of the biofilm formation.

Tetracycline accumulation in biofilms enhances the selection pressure on Escherichia coli for expression of antibiotic resistance

Microorganisms are present as either biofilm or planktonic species in natural and engineered environments. Little is known about the selection pressure emanating from exposure to sub-minimal inhibitory concentration of antibiotics on planktonic vs. biofilm bacteria. In this study, an E. coli bioreporter was used to develop biofilms on glass and high-density polyethylene (HDPE) surfaces, and compared with the corresponding planktonic bacteria in antibiotic resistance expression when exposed to a range of μg/L levels of tetracycline. The antibiotic resistance-associated fluorescence emissions from biofilm E. coli reached up to 1.6 times more than those from planktonic bacteria. The intensively developed biofilms on glass surfaces caused the embedded bacteria to experience higher selection pressure and express more antibiotic resistance than those on HDPE surfaces. The temporal pattern of fluorescence emissions from biofilm E. coli was consistent with the biofilm-developing processes during the experimental period. The increased expression of antibiotic resistance from biofilm bacteria could be attributed to the high affinity of tetracycline with extracellular polymeric substances (EPS). The enhanced accumulation of tetracycline in biofilms could exert higher selection pressure on the embedded bacteria. These results suggest that in many natural and engineered systems the higher antibiotic resistance in biofilm bacteria could be attributed partially to the retention antibiotics by the EPS in biofilms.

Anti-Infective and Toxicity Properties of Carbon Based Materials: Graphene and Functionalized Carbon Nanotubes

Recently, antimicrobial activities of various carbon-based nanomaterials against specific pathogens have become one of the most significant research interests in this field. Carbon nanotubes (CNTs) are promising multidisciplinary nanostructures in biomedicine, drug delivery, genetic engineering, biosensors, and artificial implants. However, the biomedical administration of CNTs is dependent on their solubility, toxicity, and biocompatibility, as well as novel drug-delivery applications through optimization of the drug's loading capacity, cellular absorption, and continuous release within the target cell. The usage of CNTs and Graphene materials as antimicrobial agents and nanocarriers for antibiotics delivery would possibly improve their bioavailability and facilitate better anti-infective therapy. However, it is worth mentioning that CNTs' antimicrobial activity and toxicity are highly dependent on their preparation and synthesis method. Various types of research have confirmed that diameter, length, residual catalyst, metal content, surface coating, electronic structure, and dispersibility would affect CNTs' toxicity toward bacteria and human cells. In this review article, a general study was performed on the antimicrobial properties of carbon-based nanomaterials, as well as their toxicity and applications in confronting different microorganisms. This study could be useful for researchers who are looking for new and effective drug delivery methods in the field of microbial resistance.

Growth, biofilm formation and atrazine degrading gene (trzN) expression of Arthrobacter sp. DNS10 cultured with montmorillonite, kaolinite and goethite

The viable and degradation potential of the strains which adhered to soil minerals are essential for eliminating organic pollutants from soil. Herein, the interaction (growth, biofilm formation and survive) of Arthrobacter sp. DNS10, an atrazine degrading strain, with three kinds of typical soil minerals, such as montmorillonite, kaolinite and goethite, as well as the atrazine degradation gene (trzN) expression of the strain in the minerals system were studied. The results showed that montmorillonite had significant promotion effect on the growth of strain DNS10, followed by kaolinite, but goethite significantly inhibited the growth of strain DNS10. In contrast, goethite notably promoted the biofilm formation and there was less biofilm detected in montmorillonite containing system. The percentage of the survival bacteria in the biofilm that formed on montmorillonite, kaolinite and goethite was 53.8%, 40.8% and 28.2%. In addition, there were more reactive oxygen species (ROS) were detected in the cells that exposed to goethite than those of the cells exposed to kaolinite and montmorillonite. These results suggest that the electrostatic repulsion between kaolinite/montmorillonite and strain DNS10 prevents them from contacting each other and facilitates bacterial growth by allowing the strain to obtain more nutrients. Oppositely, the needle-like morphology of goethite might damage the strain DNS10 cell when they were combined by electrostatic attraction, and the goethite induced ROS also aggravate the cytotoxicity of goethite on strain DNS10. In addition, the relative transcription of trzN in the cells contacted with montmorillonite, kaolinite and goethite was 0.94-, 0.27- and 0.20- fold of the no mineral exposure treatment. Briefly, this research suggests that the minerals with different structure and/or physicochemical characteristics might cause various trend for the biofilm formation and degradation potential of the bacteria.

Bifunctional Amphiphilic Nanospikes with Antifogging and Antibiofouling Properties

Over the past few decades, extensive research efforts have been devoted to developing surfaces with unique functionalities, such as controlled wettability, antibiofouling, antifogging, and anti-icing behavior, for applications in a wide range of fields, including biomedical devices, optical instruments, microfluidics, and energy conservation and harvesting. However, many of the previously reported approaches have limitations with regard to eco-friendliness, multifunctionality, long-term stability and efficacy, and cost effectiveness. Herein, we propose a scalable bifunctional surface that simultaneously exhibits excellent antifogging and antibiofouling properties based on the synergistic integration of an eco-friendly and bio-friendly polyethylene glycol (PEG) hydrogel, oleamide (OA), and nanoscale architectures in a single flexible platform. We demonstrate that the PEG-OA-nanostructure hybrid exhibits excellent antifogging performance owing to its enhanced water absorption and spreading properties. We further show that the triple hybrid exhibits notable biofilm resistance without the use of toxic biocides or chemicals by integrating the "fouling-resistant" mechanism of the PEG hydrogel, the "fouling-release" mechanism of OA, and the "foulant-killing" mechanism of the nanostructures.

Functionalization of Multi-Walled Carbon Nanotubes Changes Their Antibiofilm and Probiofilm Effects on Environmental Bacteria

Releasing multi-walled carbon nanotubes (MWCNTs) into ecosystems affects the biofilm formation and metabolic activity of bacteria in aquatic and soil environments. Pristine (pMWCNTs), oleophilic (oMWCNTs), hydrophilic (hMWCNTs), and carboxylated (cMWCNTs) carbon nanotubes were used to investigate their effects on bacterial biofilm. A pronounced probiofilm effect of modified MWCNTs was observed on the Gram-negative bacteria of Pseudomonas fluorescens C2, Acinetobacter guillouiae 11 h, and Alcaligenes faecalis 2. None of the studied nanomaterials resulted in the complete inhibition of biofilm formation. The complete eradication of biofilms exposed to MWCNTs was not observed. The functionalization of carbon nanotubes was shown to change their probiofilm and antibiofilm effects. Gram-negative bacteria were the most susceptible to destruction, and among the modified MWCNTs, oMWCNTs had the greatest effect on biofilm destruction. The number of living cells in the biofilms was assessed by the reduction of XTT, and metabolic activity was assessed by the reduction of resazurin to fluorescent resorufin. The biofilms formed in the presence of MWCNTs reduced tetrozolium to formazan more actively than the control biofilms. When mature biofilms were exposed to MWCNTs, dehydrogenase activity decreased in Rhodococcus erythropolis 4-1, A. guillouiae 11 h, and A. faecalis 2 in the presence of pMWCNTs and hMWCNTs, as well as in A. guillouiae 11 h exposed to cMWCNTs. When mature biofilms were exposed to pMWCNTs, hMWCNTs, and cMWCNTs, the metabolism of cells decreased in most strains, and oMWCNTs did not have a pronounced inhibitory effect. The antibiofilm and probiofilm effects of MWCNTs were strain-dependent.

Unveiling steps of the TDP degradation pathway in Variovorax paradoxus TBEA6

Since the role of biobased plastics increases every year, the search for alternatives to petrol-based polymers is very important. Variovorax paradoxus TBEA6 is able to grow with 3,3'-thiodipropionic acid (TDP) as sole source for carbon and energy. TDP can be used as a precursor substrate for the synthesis of polythioesters (PTE). To increase the feasibility of PTE synthesis, a good understanding of the degradation pathway of TDP in V. paradoxus TBEA6 is essential. Therefore, two putative 3-hydroxyisobutyryl-CoA hydrolases (VPARA_03110 & VPARA_05510) and two putative 3-hydroxypropionate dehydrogenases (VPARA_41140 & VPARA_54550) were investigated in this study. The deletion mutant V. paradoxus ∆VPARA_05510 showed a TDP-negative phenotype during growth experiments. The ability to grow with TDP as sole carbon source was successfully restored by complementation. Supernatant analysis revealed that the deletion mutant did not metabolize TDP or 3MP anymore. A specific enzyme activity up to 0.032 U/mg for the purified 3-hydroxyisobutyryl-CoA hydrolase VPARA_05510 was determined. A shift in the proteins (VPARA_54550) melting temperature of 6 °C with 2000 µM 3HP in comparison to protein without ligand was observed during thermal shift assays with the putative 3-hydroxypropionate dehydrogenase.

Phenotypic and transcriptional study of the antimicrobial activity of silver and zinc oxide nanoparticles on a wastewater biofilm-forming Pseudomonas aeruginosa strain

The extensive use of nanoparticles (NPs) in industrial processes makes their potential release into the environment an issue of concern. Ag and ZnO NPs are among the most frequently used NPs, potentially reaching concentrations of 1-4 and 64 mg/kg, respectively, in Wastewater Treatment Plants (WWTPs), with unknown effects over microbial populations. Thus, we examined, in depth, the effect of such NPs on a P. aeruginosa strain isolated from a WWTP. We evaluated the growth, ROS production and biofilm formation, in addition to the transcriptomic response in presence of Ag and ZnO NPs at concentrations potentially found in sewage sludge. The transcriptomic and phenotypic patterns of P. aeruginosa in presence of Ag NPs were, in general, similar to the control treatment, with some specific transcriptional impacts affecting processes involved in biofilm formation and iron homeostasis. The biofilms formed under Ag NPs treatment were, on average, thinner and more homogeneous. ZnO NPs also alters the biofilm formation and iron homeostasis in P. aeruginosa, however, the higher and more toxic concentrations utilized caused an increase in cell death and eDNA release. Thus, the biofilm development was characterized by EPS production, via eDNA release. The number of differentially expressed genes in presence of ZnO NPs was higher compared to Ag NPs treatment. Even though the responses of P. aeruginosa to the presence of the studied metallic NPs was at some extent similar, the higher and more toxic concentrations of ZnO NPs produced greater changes concerning cell viability and ROS production, causing disruption in biofilm development.

Engineering plants with carbon nanotubes: a sustainable agriculture approach

Sustainable agriculture is an important conception to meet the growing food demand of the global population. The increased need for adequate and safe food, as well as the ongoing ecological destruction associated with conventional agriculture practices are key global challenges. Nanomaterials are being developed in the agriculture sector to improve the growth and protection of crops. Among the various engineered nanomaterials, carbon nanotubes (CNTs) are one of the most promising carbon-based nanomaterials owing to their attractive physiochemical properties such as small size, high surface area, and superior mechanical and thermal strength, offering better opportunities for agriculture sector applications. This review provides basic information about CNTs, including their history; classification; and electrical, thermal, and mechanical properties, with a focus on their applications in the agriculture field. Furthermore, the mechanisms of the uptake and translocation of CNTs in plants and their defense mechanisms against environmental stresses are discussed. Finally, the major shortcomings, threats, and challenges of CNTs are assessed to provide a broad and clear view of the potential and future directions for CNT-based agriculture applications to achieve the goal of sustainability.

Architectural Features and Resistance to Food-Grade Disinfectants in Listeria monocytogenes-Pseudomonas spp. Dual-Species Biofilms

Listeria monocytogenes is considered a foodborne pathogen of serious concern capable of forming multispecies biofilms with other bacterial species, such as Pseudomonas spp., adhered onto stainless steel (SS) surfaces. In an attempt to link the biofilms' morphology and resistance to biocides, dual-species biofilms of L. monocytogenes, in co-culture with either Pseudomonas aeruginosa, Pseudomonas fluorescens, or Pseudomonas putida, were assayed to ascertain their morphological characteristics and resistance toward benzalkonium chloride (BAC) and neutral electrolyzed water (NEW). Epifluorescence microscopy analysis revealed that each dual-species biofilm was distributed differently over the SS surface and that these differences were attributable to the presence of Pseudomonas spp. Confocal laser scanning microscopy (CLSM) assays demonstrated that despite these differences in distribution, all biofilms had similar maximum thicknesses. Along with this, colocalization analyses showed a strong trend of L. monocytogenes to share location within the biofilm with all Pseudomonas assayed whilst the latter distributed throughout the surface independently of the presence of L. monocytogenes, a fact that was especially evident in those biofilms in which cell clusters were present. Finally, a modified Gompertz equation was used to fit biofilms' BAC and NEW dose-response data. Outcomes demonstrated that L. monocytogenes was less susceptible to BAC when co-cultured with P. aeruginosa or P. fluorescens, whereas susceptibility to NEW was reduced in all three dual-species biofilms, which can be attributable to both the mechanism of action of the biocide and the architectural features of each biofilm. Therefore, the results herein provided can be used to optimize already existing and develop novel target-specific sanitation treatments based on the mechanism of action of the biocide and the biofilms' species composition and structure.

Recent advances in carbon-based nanomaterials for combating bacterial biofilm-associated infections

The prevalence of bacterial pathogens among humans has increased rapidly and poses a great threat to health. Two-thirds of bacterial infections are associated with biofilms. Recently, nanomaterials have emerged as anti-biofilm agents due to their enormous potential for combating biofilm-associated infections and infectious disease management. Among these, relatively high biocompatibility and unique physicochemical properties of carbon-based nanomaterials (CBNs) have attracted wide attention. This review presented the current advances in anti-biofilm CBNs. Different kinds of CBNs and their physicochemical characteristics were introduced first. Then, the various potential mechanisms underlying the action of anti-biofilm CBNs during different stages were discussed, including anti-biofouling activity, inhibition of quorum sensing, photothermal/photocatalytic inactivation, oxidative stress, and electrostatic and hydrophobic interactions. In particular, the review focused on the pivotal role played by CBNs as anti-biofilm agents and delivery vehicles. Finally, it described the challenges and outlook for the development of more efficient and bio-safer anti-biofilm CBNs.

Environmentally Induced Changes of Commercial Carbon Nanotubes in Aqueous Suspensions. Adaptive Behavior of Bacteria in Biofilms

The effects of environmental factors such as sunlight irradiation and the presence of humic acid (HA) on the physicochemical properties of commercial multiwall carbon nanotubes (MWCNT) suspended in a simulated inorganic matrix (SIM) and their impacts on bacteria growing in biofilms were evaluated. Both solar irradiation and the presence of HA lead to the dissolution of adsorbed metals on the MWCNT, which are residues of synthesis catalysts. Also, preferential adsorption of certain HA components on the MWCNT induces important modifications in the aliphatic/aromatic relationship of HA components in solution and the generation and release of new moieties. Results demonstrated that the variation of such physicochemical parameters strongly affects the interactions of MWCNT with Pseudomonas aeruginosa sessile bacteria. Thus, the number of attached bacteria increased, and stress responses such as decrease in bacterial size were found in the presence of sunlight-irradiated MWCNT with a particular distribution of extracellular polymeric substances (EPS) strands. A shielding effect was observed when HA was added. It was concluded that physicochemical alterations caused by environmental conditions (with/without irradiation, presence/absence of HA) on MWCNT-containing SIM trigger distinctive adaptive behavior of bacteria in biofilms. This information must be taken into account in the development of biologically assisted treatments for organic metal co-contamination of MWCNT-containing media since MWCNT discharge alters the physicochemical properties and composition of the aqueous environment and the response of the biofilms that interact with it.

Antimicrobial and anti-adhesive properties of carbon nanotube-based surfaces for medical applications: a systematic review

Although high-performance carbon materials are widely used in surface engineering, with emphasis on carbon nanotubes (CNTs), the application of CNT nanocomposites on medical surfaces is poorly documented. In this study, we aimed to evaluate the antimicrobial and anti-adhesive properties of CNT-based surfaces. For this purpose, a PRISMA-oriented systematic review was conducted based on predefined criteria and 59 studies were selected for the qualitative analysis. Results from the analyzed studies suggest that surfaces containing modified CNTs, and specially CNTs conjugated with different polymers, exhibited strong antimicrobial and anti-adhesive activities. These composites seem to preserve the CNT toxicity to microorganisms and promote CNT-cell interactions, as well as to protect them from nonspecific protein adsorption. However, CNTs cannot yet compete with the conventional strategies to fight biofilms as their toxicity profile on the human body has not been thoroughly addressed. This review can be helpful for the development of new engineered medical surfaces.

Review on Carbon Nanotube Varieties for Healthcare Application: Effect of Preparation Methods and Mechanism Insight

Many potential uses of carbon nanotubes (CNT) in various sectors have created an urge to assess their diverse range of properties pertaining to various applications like catalysis, biosensor, and antimicrobial activity. Increasing studies on the biosensor and antibacterial activity of CNT have prompted tremendous interest in the utilization of the carbon-based nanostructured material as an alternative to currently existing antibiotics. However, the study of bactericidal aspects of this nanomaterial is relatively new and hence the deeper understanding of the various physicochemical characteristics and antimicrobial nature of CNT is extremely wanted. This review covers the effect of framework substitution and explains the understanding of membrane disintegration and oxidative stresses upon nanomaterials for antimicrobial activity. The present article has also reviewed effect of preparation nanoparticle deposition and framework modification on carbon nanotube structure. The recent research on graphene-modified nanomaterials for biosensor applications related to healthcare/clinical applications have also been discussed. Major physicochemical contributing factors such as size, functionalization, high surface area, and aggregation features of CNT assisting in the bacterial killing have nicely been outlined. Hence, the present review explains the supporting information related with Single and multi-walled carbon nanotube and summarized the advantages of functionalized carbon nanotube/graphene-based nanostructured carbon-based materials towards protection and reduction of bacterial/viral infections in the healthcare sector.

Hormetic Promotion of Biofilm Growth by Polyvalent Bacteriophages at Low Concentrations

Interactions between bacteriophages (phages) and biofilms are poorly understood despite their broad ecological and water quality implications. Here, we report that biofilm exposure to lytic polyvalent phages at low concentrations (i.e., 10²-10⁴ phages/mL) can counterintuitively promote biofilm growth and densification (corroborated by confocal laser scanning microscopy (CLSM)). Such exposure hormetically upregulated quorum sensing genes (by 4.1- to 24.9-fold), polysaccharide production genes (by 3.7- to 9.3-fold), and curli synthesis genes (by 4.5- to 6.5-fold) in the biofilm-dwelling bacterial hosts (i.e., Escherichia coli and Pseudomonas aeruginosa) relative to unexposed controls. Accordingly, the biofilm matrix increased its polysaccharide and extracellular DNA content relative to unexposed controls (by 41.8 ± 2.3 and 81.4 ± 2.2%, respectively), which decreased biofilm permeability and increased structural integrity. This contributed to enhanced resistance to disinfection with chlorine (bacteria half-lives were 6.08 ± 0.05 vs 3.91 ± 0.03 min for unexposed controls) and to subsequent phage infection (biomass removal was 18.2 ± 1.2 vs 32.3 ± 1.2% for unexposed controls), apparently by mitigating diffusion of these antibacterial agents through the biofilm. Overall, low concentrations of phages reaching a biofilm may result in unintended biofilm stimulation, which might accelerate biofouling, biocorrosion, or other biofilm-related water quality problems.

Hydrophilic polymer-based anti-biofouling coatings: Preparation, mechanism, and durability

Anti-biofouling materials that combat microorganism attachment have been intensively studied due to the ever-growing demand on smart and durable coatings. Although various hydrophilic polymer surfaces demonstrated superior anti-biofouling properties, their practical application was hampered by the undesired mechanical vulnerability and complicated fabrication process. In this review, we summarized the mechanically and chemically robust anti-biofouling coatings into six strategies namely (i) 3D-grafted coatings, (ii) hierarchical spheres-based coatings, (iii) inorganic nanomaterials-reinforced coatings, (iv) hydrolysis-based coating, (v) semi-interpenetrating structure-based coatings, and (vi) layer-by-layer (LbL) assembled coatings. The anti-biofouling efficacy and durability of these coatings over a series of challenges were also comprehensively presented. The purpose of this review is to inspire researchers to develop novel anti-biofouling coatings for future practical applications.

Carbon nanomaterials against pathogens; the antimicrobial activity of carbon nanotubes, graphene/graphene oxide, fullerenes, and their nanocomposites

Recently, antibiotic resistance of pathogens has grown given the excessive and inappropriate usage of common antimicrobial agents. Hence, producing novel antimicrobial compounds is a necessity. Carbon nanomaterials (CNMs) such as carbon nanotubes, graphene/graphene oxide, and fullerenes, as an emerging class of novel materials, can exhibit a considerable antimicrobial activity, especially in the nanocomposite forms suitable for different fields including biomedical and food applications. These nanomaterials have attracted a great deal of interest due to their broad efficiency and novel features. The most important factor affecting the antimicrobial activity of CNMs is their size. Smaller particles with a higher surface to volume ratio can easily attach onto the microbial cells and affect their cell membrane integrity, metabolic procedures, and structural components. As these unique characteristics are found in CNMs, a wide range of possibilities have raised in terms of antimicrobial applications. This study aims to cover the antimicrobial activities of CNMs (both as individual forms and in nanocomposites) and comprehensively explain their mechanisms of action. The results of this review will present a broad perspective, summarizes the most remarkable findings, and provides an outlook regarding the antimicrobial properties of CNMs and their potential applications.

Novel Nanotherapeutics as Next-generation Anti-infective Agents: Current Trends and Future Prospectives

With the ever-increasing population and improvement in the healthcare system in the 21st century, the incidence of chronic microbial infections and associated health disorders has also increased at a striking pace. The ability of pathogenic microorganisms to form biofilm matrix aggravates the situation due to antibiotic resistance phenomenon resulting in resistance against conventional antibiotic therapy which has become a public health concern. The canonical Quorum Sensing (QS) signaling system hierarchically regulates the expression of an array of virulence phenotypes and controls the development of biofilm dynamics. It is imperative to develop an alternative, yet effective and non-conventional therapeutic approach, popularly known as "anti-infective therapy" which seems to be interesting. In this regard, targeting microbial QS associated virulence and biofilm development proves to be a quite astonishing approach in counteracting the paucity of traditional antibiotics. A number of synthetic and natural compounds are exploited for their efficacy in combating QS associated microbial infections but the bioavailability and biocompatibility limit their widespread applications. In this context, the nanotechnological intervention offers a new paradigm for widespread biomedical applications starting from targeted drug delivery to diagnostics for the diagnosis and treatment of infectious diseases, particularly to fight against microbial infections and antibiotics resistance in biofilms. A wide range of nanomaterials ranging from metallic nanoparticles to polymeric nanoparticles and recent advances in the development of carbon-based nanomaterials such as Carbon Nanotubes (CNTs), Graphene Oxide (GO) also immensely exhibited intrinsic antiinfective properties when targeted towards microbial infections and associated MDR phenomenon. In addition, the use of nano-based platforms as carriers emphatically increases the efficacy of targeted and sitespecific delivery of potential drug candidates for preventing microbial infections.

Biological Safe Gold Nanoparticle-Modified Dental Aligner Prevents the Porphyromonas gingivalis Biofilm Formation

Oral microbiology could directly influence overall health. Porphyromonas gingivalis (P. gingivalis) is a highly pathogenic bacterium that causes periodontitis and other related systematic diseases, including Alzheimer's disease. Orthodontic devices (e.g., invisalign aligner) is commonly used in populations with periodontitis who are also at a high risk of systematic diseases. In this study, newly explored antibacterial 4,6-diamino-2-pyrimidinethiol-modified gold nanoparticles (AuDAPT) were coated onto aligners. The coated aligners showed favorable antibacterial activity against P. gingivalis. In the presence of the coated aligner, the number of planktonic cells was decreased, and biofilm formation was prevented. This material also showed favorable biocompatibility in vivo and in vitro. This study reveals a new method for treating oral P. gingivalis by coating aligners with AuDAPT, which has typical advantages compared to other treatments for both periodontitis and related systematic diseases.

Suspended multiwalled, acid-functionalized carbon nanotubes promote aggregation of the opportunistic pathogen Pseudomonas aeruginosa

The increasing prevalence of carbon nanotubes (CNTs) as components of new functional materials has the unintended consequence of causing increases in CNT concentrations in aqueous environments. Aqueous systems are reservoirs for bacteria, including human and animal pathogens, that can form biofilms. At high concentrations, CNTs have been shown to display biocidal effects; however, at low concentrations, the interaction between CNTs and bacteria is more complicated, and antimicrobial action is highly dependent upon the properties of the CNTs in suspension. Here, impact of low concentrations of multiwalled CNTs (MWCNTs) on the biofilm-forming opportunistic human pathogen Pseudomonas aeruginosa is studied. Using phase contrast and confocal microscopy, flow cytometry, and antibiotic tolerance assays, it is found that sub-lethal concentrations (2 mg/L) of MWCNTs promote aggregation of P. aeruginosa into multicellular clusters. However, the antibiotic tolerance of these "young" bacterial-CNT aggregates is similar to that of CNT-free cultures. Overall, our results indicate that the co-occurrence of MWCNTs and P. aeruginosa in aqueous systems, which promotes the increased number and size of bacterial aggregates, could increase the dose to which humans or animals are exposed.

Mechanically Induced Bacterial Death Imaged in Real Time: A Simultaneous Nanoindentation and Fluorescence Microscopy Study

Mechano-bactericidal nanomaterials rely on their mechanical or physical interactions with bacteria and are promising antimicrobial strategies that overcome bacterial resistance. However, the real effect of mechanical versus chemical action on their activity is under debate. In this paper, we quantify the forces necessary to produce critical damage to the bacterial cell wall by performing simultaneous nanoindentation and fluorescence imaging of single bacterial cells. Our experimental setup allows puncturing the cell wall of an immobilized bacterium with the tip of an atomic force microscope (AFM) and following in real time the increase in the fluorescence signal from a cell membrane integrity marker. We correlate the forces exerted by the AFM tip with the fluorescence dynamics for tens of cells, and we find that forces above 20 nN are necessary to exert critical damage. Moreover, a similar experiment is performed in which bacterial viability is assessed through physiological activity, in order to gain a more complete view of the effect of mechanical forces on bacteria. Our results contribute to the quantitative understanding of the interaction between bacteria and nanomaterials.

Graphene Surfaces Interaction with Proteins, Bacteria, Mammalian Cells, and Blood Constituents: The Impact of Graphene Platelet Oxidation and Thickness

Graphene-based materials (GBMs) have been increasingly explored for biomedical applications. However, interaction between GBMs-integrating surfaces and bacteria, mammalian cells, and blood components, that is, the major biological systems in our body, is still poorly understood. In this study, we systematically explore the features of GBMs that most strongly impact the interactions of GBMs films with plasma proteins and biological systems. Films produced by vacuum filtration of GBMs with different oxidation degree and thickness depict different surface features: graphene oxide (GO) and few-layer GO (FLGO) films are more oxidized, smoother, and hydrophilic, while reduced GO (rGO) and few-layer graphene (FLG) are less or nonoxidized, rougher, and more hydrophobic. All films promote glutathione oxidation, although in a lower extent by rGO, indicating their potential to induce oxidative stress in biological systems. Human plasma proteins, which mediate most of the biological interactions, adsorb less to oxidized films than to rGO and FLG. Similarly, clinically relevant bacteria, Staphylococcus epidermidis, Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli, adhere less to GO and FLGO films, while rGO and FLG favor bacterial adhesion and viability. Surface features caused by the oxidation degree and thickness of the GBMs powders within the films have less influence toward human foreskin fibroblasts; all materials allow cell adhesion, proliferation and viability up to 14 days, despite less on rGO surfaces. Blood cells adhere to all films, with higher numbers in less or nonoxidized surfaces, despite none having caused hemolysis (<5%). Unlike thickness, oxidation degree of GBMs platelets strongly impact surface morphology/topography/chemistry of the films, consequently affecting protein adsorption and thus bacteria, fibroblasts and blood cells response. Overall, this study provides useful guidelines regarding the choice of the GBMs to use in the development of surfaces for an envisioned application. Oxidized materials appear as the most promising for biomedical applications that require low bacterial adhesion without being cytotoxic to mammalian cells.

Elucidation of Antimicrobial Activity of Non-Covalently Dispersed Carbon Nanotubes

Microorganisms have begun to develop resistance because of inappropriate and extensive use of antibiotics in the hospital setting. Therefore, it seems to be necessary to find a way to tackle these pathogens by developing new and effective antimicrobial agents. Carbon nanotubes (CNTs) have attracted growing attention because of their remarkable mechanical strength, electrical properties, and chemical and thermal stability for their potential applications in the field of biomedical as therapeutic and diagnostic nanotools. However, the impact of carbon nanotubes on microbial growth has not been fully investigated. The primary purpose of this research study is to investigate the antimicrobial activity of CNTs, particularly double-walled and multi-walled nanotubes on representative pathogenic strains such as Gram-positive bacteria Staphylococcus aureus, Gram-negative bacteria Pseudomonas aeruginosa, Klebsiella pneumoniae, and fungal strain Candida albicans. The dispersion ability of CNT types (double-walled and multi-walled) treated with a surfactant such as sodium dodecyl-benzenesulfonate (SDBS) and their impact on the microbial growth inhibition were also examined. A stock concentration 0.2 mg/mL of both double-walled and multi-walled CNTs was prepared homogenized by dispersing in surfactant solution by using probe sonication. UV-vis absorbance, Fourier transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM) were used for the characterization of CNTs dispersed in the surfactant solution to study the interaction between molecules of surfactant and CNTs. Later, scanning electron microscopy (SEM) was used to investigate how CNTs interact with the microbial cells. The antimicrobial activity was determined by analyzing optical density growth curves and viable cell count. This study revealed that microbial growth inhibited by non-covalently dispersed CNTs was both depend on the concentration and treatment time. In conclusion, the binding of surfactant molecules to the surface of CNTs increases its ability to disperse in aqueous solution. Non-covalent method of CNTs dispersion preserved their structure and increased microbial growth inhibition as a result. Multi-walled CNTs exhibited higher antimicrobial activity compared to double-walled CNTs against selected pathogens.

Towards a better understanding of Pseudomonas putida biofilm formation in the presence of ZnO nanoparticles (NPs): Role of NP concentration

Elucidating the effects of nanoparticles (NPs) on key bacterial functions not only deepens our understanding of nano-toxicity mechanisms, but also guides us in the design criteria for manufacturing safe nanomaterials. In this study, bacterial growth, biofilm development and the expression of biofilm-related genes were monitored in Pseudomonas putida KT2440, a plant-beneficial bacterium, following exposure to ZnO NPs. Low concentrations of NPs (0.5-30 mg L^-1) significantly promoted bacterial growth and biofilm formation, while higher concentrations (>30 mg L^-1) significantly inhibited biofilm formation. Confocal laser scanning microscopy revealed that microscope slides coated with 0.5 mg L^-1 of ZnO NPs showed enhanced bacterial colonization and biomass production, but at higher concentrations (250 mg L^-1), biomass production was about 11 times lower than that of the substrate without NPs. Increased protein and sugar contents of the biofilm matrix corroborated the stimulating effects of low concentrations of ZnO NPs. Physiological data were supported by changes in the expression of genes associated with oxidative stress and biofilm development. ZnO NPs at 0.5 mg L^-1 stimulated the expression of quorum sensing, lipopolysaccharide biosynthesis, and antibiotic resistance genes; high concentrations of ZnO NPs (250 mg L^-1) down-regulated biofilm formation-related genes and up-regulated antioxidant genes. Our results indicate that long-term release of low concentrations of ZnO NPs to the environment would promote undesired biofilm formation and increased resistance to antibiotics.

Effects of carbon nanotubes on biodegradation of pollutants: Positive or negative?

Recently, a large quantity of carbon nanotubes (CNTs) enters the environment due to the increasing production and applications. More and more researches are focused on the fate and possible ecological risks of CNTs. Some literatures summarized the effects of CNTs on the chemical behavior and fate of pollutants. However, little reviewed the effects of CNTs on the biodegradation of pollutants. In general, the effects of CNTs on the biodegradation of pollutants and the related mechanisms were summarized in this review. CNTs have positive or negative effects on the biodegradation of contaminants by affecting the functional microorganisms, enzymes and the bioavailability of pollutants. CNTs may affect the microbial growth, activity, biomass, community composition, diversity and the activity of enzymes. The decrease of the bioavailability of pollutants due to the sorption on CNTs also causes the reduction of the biodegradation of contaminants. In addition, the roles of CNTs are controlled by multiple mechanisms, which are divided into three aspects i.e., properties of CNTs, environment condition, and microorganisms themself. The better understanding of the fate of CNTs and their impacts on the biochemical process in the environment is conducive to determine the release of CNTs into the environment.

Nanomaterials for removal of waterborne pathogens

As the nanotechnological applications have taken over in different fields, their applications for water and wastewater treatment is also surfacing as a fast-developing and very promising area. Recent advancements in nanotechnological science and engineering advise that many of the waterborne pathogens could be culminated or debilitated using nanobiosorbents, nanocatalysts, bioactive nanoparticles, nanostructured catalytic membranes, nanobioreactors, nanoparticle-enhanced filtration among other products, and processes resulting from the development of nanotechnology. A detailed insight has been provided for advanced techniques such as photochemical (photocatalytic and advanced oxidation processes) applications of metal oxide nanoparticles, nanomembrane technology, bioinspired nanomaterials, and nanotechnological innovations (nano-Ag, fullerenes, nanotubes, and molecularly imprinted polymers, etc.), which prove to be highly potential as well as promising and cost-effective. However, there are still some shortcomings and challenges that must be overcome which will be looked upon in this chapter.

Efficient removal of atrazine by iron-modified biochar loaded Acinetobacter lwoffii DNS32

In order to efficiently remove commonly used herbicide atrazine in farmland, an iron-modified biochar (FeMBC) was fabricated via chemical co-precipitation of Fe³⁺ onto corn stalks biochar. The composites of FeMBC and Acinetobacter lwoffii DNS32 (bFeMBC) effectively accelerated the degradation rate of atrazine (100 mg L^-1) in inorganic salt culture solution. TEM，XRD，XPS and FTIR were used to study the basic properties of the Materials. FeMBC promoted the formation of bacterial biofilm, -NH functional group on the surface of bacterial extracellular polymers (EPS) and FeMBC could interact with the aromatic ring of atrazine through Hbonding, which were conducive for microbial capture of atrazine. Meanwhile, the pores (2-10 μm) of FeMBC facilitated the passage of the DNS32 strain and the atrazine molecule, which contributed to the efficient capture and degradation of atrazine by DNS32 strain. BFeMBC amendment helped to maintain the bacterial diversity in the atrazine contaminated soil. The increase of rare bacteria (relative abundance of 0.01%-0.05%) richness plays a certain role in stabilizing nutrient cycling, thereby promoting microbial nutrient utilization activities and has the function of pollutant degradation. This may contribute to the digestion of atrazine and its intermediate metabolites，reducing the stress of microbial in atrazine contaminated soil. bFeMBC amendment may be a promising in situ remediation technique for soil atrazine contamination.

Silver nanoparticles exert concentration-dependent influences on biofilm development and architecture

Objectives

To investigate the impact of silver nanoparticles (AgNPs) on the biofilm growth and architecture.

Materials and methods

Silver nitrate was reduced by d‐maltose to prepare AgNPs in the presence of ammonia and sodium hydroxide. The physicochemical properties of AgNPs were characterized by transmission electron microscopy, ultraviolet‐visible spectroscopy and inductively coupled plasma mass spectrometry. The development of biofilm with and without AgNPs was explored by crystal violet stain. The structures of mature biofilm were visually studied by confocal laser scanning microscopy and scanning electron microscopy. Bacterial cell, polysaccharide and protein within biofilm were assessed quantitatively by colony‐counting method, phenol‐sulphuric acid method and Bradford assay, respectively.

Results

The spherical AgNPs (about 30 nm) were successfully synthesized. The effect of AgNPs on Pseudomonas aeruginosa biofilm development was concentration‐dependent. Biofilm was more resistant to AgNPs than planktonic cells. Low doses of AgNPs exposure remarkably delayed the growth cycle of biofilm, whereas high concentration (18 μg/mL) of AgNPs fully prevented biofilm development. The analysis of biofilm architecture at the mature stage demonstrated that AgNPs exposure at all concentration led to significant decrease of cell viability within treated biofilms. However, sublethal doses of AgNPs increased the production of both polysaccharide and protein compared to control, which significantly changed the biofilm structure.

Conclusions

AgNPs exert concentration‐dependent influences on biofilm development and structure, which provides new insight into the role of concentration played in the interaction between antibacterial nanoparticles and biofilm, especially, an ignored sublethal concentration associated with potential unintended consequences.

Understanding the influence of carbon nanomaterials on microbial communities

Carbon nanomaterials (CNMs) are widely used because of their unique advantages in recent years. At the same time, the influence of CNMs on the environment is becoming increasingly prominent. This review mainly introduces the research progress in the effects of fullerenes, multi-walled carbon nanotubes (MWCNTs), single-walled carbon nanotubes (SWCNTs) and graphene on microorganisms and their toxicity mechanisms. On this basis, we have analyzed beneficial and adverse effects of fullerenes, graphene, MWCNTs and SWCNTs to microorganisms, and discussed the similarities of the toxicity mechanisms of different CNMs on microorganisms. This review helps provide ideas on how to protect microorganisms from the impacts of carbon nanomaterials, and it will be conductive to providing a strong theoretical basis for better application of carbon nanomaterials.

Chronic Exposure to an Environmentally Relevant Triclosan Concentration Induces Persistent Triclosan Resistance but Reversible Antibiotic Tolerance in Escherichia coli

The major concern regarding the biocide triclosan (TCS) stems from its potential coselection for antibiotic resistance. However, environmental impacts are often investigated using high concentrations and acute exposure, while predicted releases are typified by chronic low concentrations. Moreover, little information is available regarding the reversibility of TCS and derived antibiotic resistance with diminishing TCS usage. Here, the model Gram-negative bacterium Escherichia coli was exposed to 0.01 mg/L TCS continuously for more than 100 generations. The adapted cells gained considerable resistance to TCS as indicated by a significant increase in the minimal inhibitory concentration (MIC₅₀) from 0.034 to 0.581 mg/L. This adaptive evolution was attributed to overexpression and mutation of target genes (i.e., fabI) as evidenced by transcriptomic and genomic analyses. However, only mild tolerance to various antibiotics was observed, possibly due to reduced membrane permeability and biofilm formation. After TCS exposure ceased, the adapted cells showed persistent resistance to TCS due to inheritable genetic mutations, whereas their antibiotic tolerance declined over time. Our results suggest that extensive use of TCS may promote the evolution and persistence of TCS-resistant bacterial pathogens. A quantitative definition of the conditions under which TCS selects for multidrug resistance in the environment is crucially needed.

A review on the interactions between engineered nanoparticles with extracellular and intracellular polymeric substances from wastewater treatment aggregates

Engineered nanoparticles (ENPs) will inevitably enter wastewater treatment plants (WWTPs) due to their widespread application; thus, it is necessary to study the migration and transformation of nanoparticles in sewage treatment systems. Extracellular polymeric substances (EPSs) such as polysaccharides, proteins, nucleic acids, humic acids and other polymers are polymers released by microorganisms under certain conditions. Intracellular polymeric substances (IPSs) are microbial substances contained in the body with compositions similar to those of extracellular polymers. In this review, we summarize the characteristics of EPSs and IPSs from sewage-collecting microbial aggregates containing pure bacteria, activated sludge, granular sludge and biofilms. We also further investigate the dissolution, adsorption, aggregation, deposition, oxidation and other chemical transformation processes of nanoparticles, such as metals, metal oxides, and nonmetallic oxides. In particular, the review deeply analyzes the migration and transformation mechanisms of nanoparticles in EPS and IPS matrices, including physical, chemical, biological interactions mechanisms. Moreover, various factors, such as ionic strength, ionic valence, pH, light, oxidation-reduction potential and dissolved oxygen, influencing the interaction mechanisms are discussed. In recent years, studies on the interactions between EPSs/IPSs and nanoparticles have gradually increased, but the mechanisms of these interactions are seldom explored. Therefore, developing a systematic understanding of the migration and transformation mechanisms of ENPs is significant.

Inhibition of Wild Enterobacter cloacae Biofilm Formation by Nanostructured Graphene- and Hexagonal Boron Nitride-Coated Surfaces

Although biofilm formation is a very effective mechanism to sustain bacterial life, it is detrimental in medical and industrial sectors. Current strategies to control biofilm proliferation are typically based on biocides, which exhibit a negative environmental impact. In the search for environmentally friendly solutions, nanotechnology opens the possibility to control the interaction between biological systems and colonized surfaces by introducing nanostructured coatings that have the potential to affect bacterial adhesion by modifying surface properties at the same scale. In this work, we present a study on the performance of graphene and hexagonal boron nitride coatings (h-BN) to reduce biofilm formation. In contraposition to planktonic state, we focused on evaluating the efficiency of graphene and h-BN at the irreversible stage of biofilm formation, where most of the biocide solutions have a poor performance. A wild Enterobacter cloacae strain was isolated, from fouling found in a natural environment, and used in these experiments. According to our results, graphene and h-BN coatings modify surface energy and electrostatic interactions with biological systems. This nanoscale modification determines a significant reduction in biofilm formation at its irreversible stage. No bactericidal effects were found, suggesting both coatings offer a biocompatible solution for biofilm and fouling control in a wide range of applications.

Impact of soil clay minerals on growth, biofilm formation, and virulence gene expression of Escherichia coli O157:H7

Soil, composed mainly of minerals, plays a central role in the circulation of microbial pathogens in the environment. Herein, the growth, biofilm formation, and virulence gene expression of the pathogenic bacteria Escherichia coli O157:H7 were monitored following exposure to montmorillonite, kaolinite, and goethite, three common soil minerals in the clay size fraction. E. coli O157:H7 growth was notably promoted (P < 0.05), while biofilm formation was inhibited in the presence of montmorillonite (P < 0.05), which is attributed to the suppression of colanic acid (CA) production and an increase in bacterial motility. Kaolinite not only promoted bacterial growth (P < 0.05), but also contributed to biofilm formation upon stimulating CA production. Upon exposure to goethite, notably slower bacterial growth and higher biomass of biofilm were observed as compared to the control (P < 0.05). Goethite stimulated the synthesis of CA to encase cells in a protective biofilm in response to the tight association between bacteria and goethite, which could cause bacterial death. Additionally, the transcription of virulence factors (stxA-1 and stxA-2) was significantly decreased in goethite or kaolinite system (P < 0.05). These findings indicate that minerals play important roles in the physiological state of bacteria and ultimately govern the fate of this pathogen in soils.

Graphene oxide-silver nanocomposites modulate biofilm formation and extracellular polymeric substance (EPS) production

Biofilms with positive and negative actions ubiquitously affect medical infections, environmental remediation and industrial processes. However, it remains challenging to control the growth of harmful biofilms as well as to exploit the use of beneficial biofilms. Here we investigated the effect of an antibacterial graphene oxide-silver nanoparticles (GO-AgNPs) composite on Pseudomonas aeruginosa biofilm formation. We found that GO-AgNPs prevented biofilm formation in a dose-dependent manner, with a threshold of 15 μg mL^-1. Interestingly, the bacterial biomass significantly decreased, but extracellular polymeric substance (EPS) production remarkably increased in mature biofilms treated with GO-AgNPs of an appropriate concentration, suggesting that GO-AgNPs effectively modulate biofilm development and structure. Moreover, we established that GO-AgNPs caused bacterial death via both physical damage and oxidative stress, showing the synergic action of GO and AgNPs. These findings facilitate the use of graphene-based nanocomposites for greener antibiotic applications.

Recombinant Escherichia coli BL21-pET28a-egfp Cultivated with Nanomaterials in a Modified Microchannel for Biofilm Formation

The application of whole cells as catalytic biofilms in microchannels has attracted increasing scientific interest. However, the excessive biomass formation and structure of biofilms in a reactor limits their use. A microchannel reactor with surface modification was used to colonize recombinant Escherichia coil BL21-pET28a-egfp rapidly and accelerated growth of biofilms in the microchannel. The segmented flow system of 'air/culture medium containing nanomaterials' was firstly used to modulate the biofilms formation of recombinant E. coil; the inhibitory effects of nanomaterials on biofilm formation were investigated. The results indicated that the segmental flow mode has a significant impact on the structure and development of biofilms. Using the channels modified by silane reagent, the culture time of biofilms (30 h) was reduced by 6 h compared to unmodified channels. With the addition of graphene sheets (10 mg/L) in Luria-Bertani (LB) medium, the graphene sheets possessed a minimum inhibition rate of 3.23% against recombinant E. coil. The biofilms cultivated by the LB medium with added graphene sheets were stably formed in 20 h; the formation time was 33.33% shorter than that by LB medium without graphene. The developed method provides an efficient and simple approach for rapid preparation of catalytic biofilms in microchannel reactors.

Fullerenes Influence the Toxicity of Organic Micro-Contaminants to River Biofilms

Organic micro-contaminants (OMCs) enter in freshwaters and interact with other contaminants such as carbon nanoparticles, becoming a problem of unknown consequences for river ecosystems. Carbon nanoparticles (as fullerenes C₆₀) are good adsorbents of organic contaminants and their interaction can potentially affect their toxicity to river biofilms. We tested the C₆₀ interactions with selected OMCs and their effects on river biofilms in different short-term experiments. In these, river biofilms were exposed to C₆₀ and three OMCs (triclosan, diuron, or venlafaxine) and their respective mixtures with fullerenes (C₆₀ + each OMC). The effects were evaluated on structural, molecular, and functional descriptors of river biofilms. Our results showed that C₆₀ did not cause toxic effects in river biofilms, whereas diuron and triclosan significantly affected the heterotrophic and phototrophic components of biofilms and venlafaxine affected only the phototrophic component. The joint exposure of C₆₀ with venlafaxine was not producing differences with respect to the former response of the toxicant, but the overall response was antagonistic (i.e., decreased toxicity) with diuron, and synergistic (i.e., increased toxicity) with triclosan. We suggest that differences in the toxic responses could be related to the respective molecular structure of each OMC, to the concentration proportion between OMC and C_60, and to the possible competition between C₆₀ pollutants on blocking the receptors of the biological cell membranes. We conclude that the presence of C₆₀ at low concentrations modified the toxicity of OMC to river biofilms. These interactions should therefore be considered when predicting toxicity of OMC in river ecosystems.

Carbonaceous Nanomaterials Have Higher Effects on Soybean Rhizosphere Prokaryotic Communities During the Reproductive Growth Phase than During Vegetative Growth

Carbonaceous nanomaterials (CNMs) can affect agricultural soil prokaryotic communities, but how the effects vary with the crop growth stage is unknown. To investigate this, soybean plants were cultivated in soils amended with 0, 0.1, 100, or 1000 mg kg-1 of carbon black, multiwalled carbon nanotubes (MWCNTs), or graphene. Soil prokaryotic communities were analyzed by Illumina sequencing at day 0 and at the soybean vegetative and reproductive stages. The sequencing data were functionally annotated using the functional annotation of prokaryotic taxa (FAPROTAX) database. The prokaryotic communities were unaffected at day 0 and were altered at the plant vegetative stage only by 0.1 mg kg-1 MWCNTs. However, at the reproductive stage, when pods were filling, most treatments (except 1000 mg kg-1 MWCNTs) altered the prokaryotic community composition, including functional groups associated with C, N, and S cycling. The lower doses of CNMs, which were previously shown to be less agglomerated and thus more bioavailable in soil relative to the higher doses, were more effective toward both overall communities and individual functional groups. Taken together, prokaryotic communities in the soybean rhizosphere can be significantly phylogenetically and functionally altered in response to bioavailable CNMs, especially when soybean plants are actively directing resources to seed production.