Facile one-step synthesis of inorganic-framework molecularly imprinted TiO2/WO3 nanocomposite and its molecular recognitive photocatalytic degradation of target contaminant

3D/1D Fe3O4@TiO2/TC-TiO2/SiO2 Magnetic Inorganic-Framework Molecularly Imprinted Fibers for Targeted Photodegradation

To achieve a selective degradation of pollutants in a water body, 3D/1D magnetic molecularly imprinted fibers Fe3O4@TiO2/TC-TiO2/SiO2 were fabricated by an electrospinning method. The molecularly imprinted layer was successfully prepared by a direct imprinting method using TiO2 as a functional monomer. Fe3O4 facilitates the catalyst recovery and light utilization. The as-prepared fibrous photocatalyst has a large specific surface area of 132.4 m2/g. The successful generation of imprinted sites was proven by various characterizations. The weak interaction between the inorganic functional monomer and tetracycline (TC) was determined to be van der Waals force and hydrogen bonds by the IGMH isosurface theory. The construction of the 3D/1D homojunction of molecularly imprinted materials is beneficial to charge transfer. The as-prepared photocatalyst exhibits a high selectivity coefficient α = 737.38 competing with RhB. The TC removal efficiency reached 100% within only 20 min. In addition, the possible degradation pathway and the degradation mechanism are reasonably proposed. This work not only provides an in-depth mechanism of the weak interaction between the inorganic molecularly imprinted functional monomer and pollutant molecules but also offers new thoughts on the fabrication of photocatalysts for the effective and selective treatment of pollutants in water bodies.

Mixed Metal Oxide W-TiO2 Nanopowder for Environmental Process: Synergy of Adsorption and Photocatalysis

A mixed metal oxide W-TiO2 nanopowder photocatalyst was prepared by using the sol-gel method with a broad range of elemental compositions x = CW/(CW + CTi), including TiO2 and WO3. The material was structurally characterized and evaluated in adsorption and photocatalytic processes by testing its removal capacity of a representative pollutant methylene blue (MB) in aqueous solutions and under UV-A and sunlight illuminations. The nanopowders appeared to be more effective adsorbents than pure TiO2 and WO3 materials, showing a maximum at 15 mol% W, which was set as the tungsten solubility limit in anatase titania. At the same time, the photocatalytic decomposition of MB peaked at 2 mol% W. The examination of different compositions showed that the most effective MB removal took place at 15 mol% W, which was attributed to the combined action of adsorption and heterogeneous photocatalysis. Moreover, MB decomposition under sunlight was stronger than under UV-A, suggesting photocatalyst activation by visible light. The pollutant removal efficiency of the material with 15 mol% W was enhanced by a factor of ~10 compared to pure TiO2 at the beginning of the process, which shows its high potential for use in depollution processes in emergency cases of a great pollutant leak. As a result, a Wx=0.15-TiO2 catalyst could be of high interest for wastewater purification in industrial plants.

TiO2/Loofah-Halloysite Bio-Hybrid Composites as Efficient Systems for VOCs Removal

Volatile organic compounds (VOCs), recognized as hazardous air contaminants, prompt the exploration of sustainable air purification methods. Solar photocatalytic oxidation emerges as a promising solution, utilizing semiconductor photocatalysts like titanium dioxide (TiO2). However, the raw material crisis necessitates reduced TiO2 usage, leading to investigations into TiO2 modification techniques. The study introduces a novel approach by employing natural fibers, specifically loofah sponge, as a TiO2 support. This method aims to maintain photocatalytic activity while minimizing TiO2 content. The article explores using halloysite, a natural clay mineral, as a supportive material, enhancing mechanical strength and adsorption properties. The resulting TiO2/loofah-halloysite composites are evaluated for their efficacy in gas-phase photocatalytic oxidation of toluene and ethanol, chosen as representative VOCs. The conversion of toluene and ethanol on the composite was 88 % and 39 %, respectively, with high selectivity toward CO2. In addition to its high performance, the bio-composite was stable for several conversion cycles, keeping the conversion activity unchanged. The study contributes to developing green hybrid materials for VOC removal, showcasing potential applications across industries.

Alumina inorganic molecularly imprinted polymer modified multi-walled carbon nanotubes for uric acid detection in sweat

Alumina inorganic molecularly imprinted polymer (MIP) modified multi-walled carbon nanotubes (MWCNTs) on a glassy carbon electrode (MWCNTs-Al2O3-MIP/GCE) was firstly designed and fabricated by one-step electro deposition technique for the detection of uric acid (UA) in sweat. The UA templates were embedded within the inorganic MIP by co-deposition with Al2O3. Through the evaluation of morphology and structure by Field Emission Scanning Electron Microscope (SEM), Energy Dispersive X-ray Spectroscopy (EDS), X-ray Photoelectron Spectroscopy (XPS) and Transmission Electron Microscopy (TEM), it was verified that the specific recognition sites can be fabricated in the electrodeposited Al2O3 molecular imprinted layer. Due to the high selectivity of molecular imprinting holes, the MWCNTs-Al2O3-MIP/GCE electrode demonstrated an impressive imprinting factor of approximately 2.338 compared to the non-molecularly imprinted glassy carbon electrode (MWCNTs-Al2O3-NIP/GCE) toward uric acid detection. Moreover, it exhibited a remarkable limit of detection (LOD) of 50 nM for UA with wide detection range from 50 nM to 600 μM. The MWCNTs-Al2O3-MIP/GCE electrode also showed strong interference resistance against common substances found in sweat. These results highlight the excellent interference resistance and selectivity of MWCNTs-Al2O3-MIP/GCE sensor, positioning it as a novel sensing platform for non-invasive uric acid detection in human sweat.

Selective removal of sulfamethoxazole by a novel double Z-scheme photocatalyst: Preferential recognition and degradation mechanism

Sulfamethoxazole (SMX) is a significant environmental concern due to its adverse effects and ecological risks. SMX elimination in aquatic environments via photocatalysis presents a viable solution, given its high oxidation potential. However, such a solution remains controversial, primarily due to a lack of selectivity. Here we introduce a molecularly imprinted TiO2@Fe2O3@g-C3N4 (MFTC) photocatalyst designed for the selective degradation of SMX. To assess MFTC's selectivity, we applied it to degrade synthetic wastewater containing SMX alongside interfering species sulfadiazine (SDZ), ibuprofen (IBU), and bisphenol A (BPA). The results demonstrated a selective degradation efficiency rate of 96.8%, nearly twice that of competing pollutants. The molecularly imprinted sites within the catalyst played a crucial role by selectively capturing SMX and enhancing its adsorption, thereby improving catalytic efficiency. The degradation process involved •OH and •O2- free radicals, with a newly proposed double Z-scheme mechanism and potential pathway for SMX degradation by the MFTC photocatalytic system. This study enriches the application of photocatalysis using molecularly imprinted nanocomposite materials for treating complex pollutant mixtures in water.

Unveiling the Latest Developments in Molecularly Imprinted Photocatalysts: A State-of-the-Art Review

Responding to the growing concerns about environmental pollutants, scientists are increasingly turning to innovative solutions rooted in the field of environmental science. One such promising avenue combines the robustness of traditional photocatalysis with the precision of molecular imprinting, leading to the proposition of molecularly imprinted photocatalysts (MIPCs). These MIPCs hold the potential to specifically target and eliminate environmental pollutants, marking them as a promising tool in modern environmental remediation. As researchers delve deeper into this field, the design and optimization of MIPCs have become hotbeds for scientific inquiry. This comprehensive overview delves into the multifaceted approaches to MIPC design, elucidating on aspects like the selection of appropriate photocatalytic bases, the pivotal role of templates, the choice of monomeric building blocks, and the integration of effective cross-linking agents. However, as with all burgeoning technologies, the development of MIPCs is not without its challenges. These potential impediments to the successful innovation and implementation of MIPCs are also explored.

Electrochemical sensor for sensitive detection of bisphenol A based on molecularly imprinted TiO2 with oxygen vacancy

Bisphenol A (BPA) is an endocrine disrupting chemical and broadly used in plastics. The leakage of BPA in food and water cycles poses a significant risk to the environment and human health. Thus, monitoring the concentration of BPA to avoid its potential risk is highly important. In this work, a simple and efficient oxygen deficient molecularly imprinted TiO2 electrochemical sensor was proposed for the detection of BPA. The introduction both oxygen vacancies and molecular imprinting evidently enhanced the electrochemical oxidation signal of BPA. The sensor had a good linear response ranging from 0.01 μM to 20 μM with a limit of detection of 3.6 nM. Additionally, the sensor showed remarkable stability, reproducibility and interference resistant ability. It also exhibits excellent recovery during the detection of real water. These findings suggested that the sensor has the potential to be developed as a simple, efficient and low-cost monitoring system for the monitoring of BPA in water.

Novel graphene electrochemical transistors incorporating zirconia inorganic molecular imprinted layer：Design, construction and application for highly sensitive and selective detection of acetaminophen

Owing to their intrinsic amplifying effect together with chemical stability, graphene electrochemical transistor sensors (GECTs) are gaining momentum for sensing applications. However, the surface of GECTs for different detection substances must be modified with different recognition molecules, which was cumbersome and lack a universal method. Molecularly imprinted polymer (MIP) is a kind of polymer with specific recognition function for given molecules. Here, MIP and GECTs were combined to effectively solve the problem of weak selectivity of GECTs, and achieve the high sensitivity and selectivity of MIP-GECTs equipment in detecting acetaminophen (AP) in complex urine environment. A novel molecular imprinting sensor based on Au nanoparticles modified zirconia (ZrO₂) inorganic molecular imprinting membrane on reduced graphene oxide (ZrO₂-MIP-Au/rGO) was proposed. ZrO₂-MIP-Au/rGO was synthesized by one-step electropolymerization using AP as template, ZrO₂ precursor as the functional monomer. The -OH group on ZrO₂ and the -OH/-CONH- group on AP were easily bonded by hydrogen bonding to form a MIP layer on the surface, which allows the sensor to have a large number of imprinted cavities for AP specific adsorption. As a proof of method, the GECTs based on ZrO₂-MIP-Au/rGO functional gate electrode has the characteristics of wide linear range (0.1 nM-4 mM), low detection limit (0.1 nM) and high selectivity for AP detection. These achievements highlight the introduction of specific and selective MIP to GECTs with unique amplification function, which could effectively solve the problem of selectivity of GECTs in complex environments, suggesting the potential of MIP-GECTs in real-time diagnosis.

Molecularly imprinted 3D SERS sensor with inorganic frameworks for specific and recyclable SERS sensing application

Poor selectivity and reusability of Au/Ag nanostructures are the main challenges for surface-enhanced Raman spectroscopy (SERS) in real sample detection. Herein, a novel specific and reusable three-dimensional (3D) SERS sensor with dual functions of selective trapping and photocatalytic degradation was designed. Firstly, Au-Ag bimetallic nanoparticles decorated silicon nanowires array (SiNWs-AuAg) were prepared as 3D SERS substrate. Then, silicon-based inorganic-framework molecularly imprinted TiO₂ (TiO₂@SiMIP) was synthesized and immobilized on SiNWs-AuAg by using rhodamine 6G (R6G) as template molecule. Owing to the excellent SERS performance of SiNWs-AuAg and the specific affinity of TiO₂@SiMIP to template molecule, the prepared SERS sensor enables sensitive and selective detection of R6G in food samples with a limit of detection (LOD) of 0.27 nM. In addition, due to the photocatalysis of TiO₂ and the stability of silicon-based inorganic framework, the residual templates in TiO₂@SiMIP can be completely removed by UV irradiation, and the imprinted cavity of regenerated sensors still maintained good selectivity after regeneration by UV irradiation.

Composite CdS/TiO2 Powders for the Selective Reduction of 4-Nitrobenzaldehyde by Visible Light: Relation between Preparation, Morphology and Photocatalytic Activity

A series of composite CdS/TiO2 powders was obtained by nucleation of TiO2 on CdS nanoseeds. This combination presents the appropriate band edge position for photocatalytic redox reactions: visible light irradiation of CdS allows the injection of electrons into dark TiO2, increasing the lifetimes of separated charges. The electrons have been used for the quantitative photoreduction of 4-nitrobenzaldehyde to 4-aminobenzaldehyde, whose formation was pointed out by 1H NMR and ESI-MS positive ion mode. Concomitant sacrificial oxidation of 2-propanol, which was also the proton source, occurred. The use of characterization techniques (XRD, N2 adsorption-desorption) evidenced the principal factors driving the photocatalytic reaction: the nanometric size of anatase crystalline domains, the presence of dispersed CdS to form an extended active junction CdS/anatase, and the presence of mesopores as nanoreactors. The result is an efficient photocatalytic system that uses visible light. In addition, the presence of TiO2 in combination with CdS improves the stability of the photoactive material, enabling its recyclability.

Greenificated Molecularly Imprinted Materials for Advanced Applications

Molecular imprinting technology (MIT) produces artificial binding sites with precise complementarity to substrates and thereby is capable of exquisite molecular recognition. Over five decades of evolution, it is predicted that the resulting host imprinted materials will overtake natural receptors for research and application purposes, but in practice, this has not yet been realized due to the unsustainability of their life cycles (i.e., precursors, creation, use, recycling, and end-of-life). To address this issue, greenificated molecularly imprinted polymers (GMIPs) are a new class of plastic antibodies that have approached sustainability by following one or more of the greenification principles, while also demonstrating more far-reaching applications compared to their natural counterparts. In this review, the most recent developments in the delicate design and advanced application of GMIPs in six fast-growing and emerging fields are surveyed, namely biomedicine/therapy, catalysis, energy harvesting/storage, nanoparticle detection, gas sensing/adsorption, and environmental remediation. In addition, their distinct features are highlighted, and the optimal means to utilize these features for attaining incredibly far-reaching applications are discussed. Importantly, the obscure technical challenges of the greenificated MIT are revealed, and conceivable solutions are offered. Lastly, several perspectives on future research directions are proposed.

Plasma-Assisted Fabrication of Molecularly Imprinted NiAl-LDH Layer on Ni Nanorod Arrays for Glyphosate Detection

An inorganic-framework molecularly imprinted NiAl layered double hydroxide (MI-NiAl-LDH) with specific template molecule (glyphosate pesticide, Glyp) recognition ability was prepared on Ni nanorod arrays (Ni NRAs) through electrodeposition followed by a low-temperature O₂ plasma treatment. The freestanding Ni/MI-NiAl-LDH NRA electrode had highly enhanced sensitivity and selectivity. The electrocatalytic oxidation of Glyp was proposed to occur at Ni³⁺ centers in MI-NiAl-LDH, and the current response depended linearly on the Glyp concentration from 10.0 nmol/L to 1.0 μmol/L (R² = 0.9906), with the limit of detection (LOD) being 3.1 nmol/L (S/N = 3). An exceptional discriminating capability with tolerance for other similar organophosphorus compounds was achieved. Molecular imprinting (N and P residues) affected the electronic structure of NiAl-LDH, triggering the formation of highly active NiOOH sites at relatively lower anodic potentials and substantially enhancing the electrocatalytic oxidation ability of the NiAl-LDH interface toward the C-N bonds in Glyp. In combination with the surface enrichment effect of MI-NiAl-LDH toward template molecules, the electrochemical oxidation signal intensity of Glyp increased significantly, with a greater peak separation from interfering molecules. These results challenge the common belief that the excellent performance of inorganic-framework molecularly imprinted interfaces arises from their specific adsorption of template molecules, providing new insight into the development of high-performance organic-pollutant-sensing electrodes.

Superior degradation of phenolic contaminants in different water matrices via non-radical Fenton-like mechanism mediated by surface-disordered WO3

Heterogeneous Fenton-like catalysis mediated by solid catalyst is a promising oxidation technology for water purification. The redox reactivity, cost-effectiveness, and environmental compatibility of solid catalyst play governing roles in oxidant activation, radical generation, and pollutant degradation. Herein, the surface-disordered WO₃ (D-WO₃) functionally engineered by the unique crystalline-amorphous core-shell structure is proven to be a superior solid catalyst of heterogeneous Fenton-like catalysis for peroxymonosulfate (PMS) activation and pollutant degradation in various water matrices. Six typical phenolic and dye pollutants are effectively and selectively degraded in the D-WO₃/PMS system with much reduced matrix effects. Both radical identifying and scavenging tests elucidate the important role of non-radical ¹O₂ and mediated electron transfer during PMS activation on the D-WO₃ surface. The superior Fenton-like activity of D-WO₃ can be mainly attributed to the surface and sub-surface distorted lattice sites with finely tailored atomic and electronic structures and surface chemistry. These distorted lattice sites can thermodynamically serve as the key reactive centers of dissociative adsorption and catalytic activation for both PMS and pollutant, with high adsorption energy, strong structural activation, and smooth electron transfer. Our findings provide a new chance for heterogeneous Fenton-like catalysis mediated by transition metal oxides with high capacity, low cost, and no toxicity for promising water purification.

Synthesis and Photocatalytic Activity of TiO2/CdS Nanocomposites with Co-Exposed Anatase Highly Reactive Facets

In this work, TiO2/CdS nanocomposites with co-exposed {101}/[111]-facets (NH4F-TiO2/CdS), {101}/{010} facets (FMA-TiO2/CdS), and {101}/{010}/[111]-facets (HF-TiO2/CdS and Urea-TiO2/CdS) were successfully synthesized through a one-pot solvothermal method by using [Ti4O9]2- colloidal solution containing CdS crystals as the precursor. The crystal structure, morphology, specific surface area, pore size distribution, separation, and recombination of photogenerated electrons/holes of the TiO2/CdS nanocomposites were characterized. The photocatalytic activity and cycling performance of the TiO2/CdS nanocomposites were also investigated. The results showed that as-prepared FMA-TiO2/CdS with co-exposed {101}/{010} facets exhibited the highest photocatalytic activity in the process of photocatalytic degradation of methyl orange (MO), and its degradation efficiency was 88.4%. The rate constants of FMA-TiO2/CdS was 0.0167 min-1, which was 55.7, 4.0, 3.7, 3.5, 3.3, and 1.9 times of No catalyst, CdS, HF-TiO2/CdS, NH4F-TiO2/CdS, CM-TiO2, Urea-TiO2/CdS, respectively. The highest photocatalytic activity of FMA-TiO2/CdS could be attributed to the synergistic effects of the largest surface energy, co-exposed {101}/{010} facets, the lowest photoluminescence intensity, lower charge-transfer resistance, and a higher charge-transfer efficiency.

Targeted degradation of refractory organic compounds in wastewaters based on molecular imprinting catalysts

Efficient removal of low-concentration refractory pollutants is a crucial problem to ensuring water safety. The use of heterogeneous catalysis of molecular imprinting technology combined with traditional catalysts is a promising method to improve removal efficiency. Presently, the research into molecular imprinting targeting catalysts focuses mainly on material preparation and performance optimization. However, more researchers are investigating other applications of imprinting materials. This review provides recent progress in photocatalyst preparation, electrocatalyst, and Fenton-like catalysts synthesized by molecular imprinting. The principle and control points of target catalysts prepared by precipitation polymerization (PP) and surface molecular imprinting (S-MIP) are introduced. Also, the application of imprinted catalysts in targeted degradation of drugs, pesticides, environmental hormones, and other refractory pollutants is summarized. In addition, the reusability and stability of imprinted catalyst in water treatment are discussed, and the possible ecotoxicity risk is analyzed. Finally, we appraised the prospects, challenges, and opportunities of imprinted catalysts in the advanced oxidation process. This paper provides a reference for the targeted degradation of refractory pollutants and the preparation of targeted catalysts.

Microwave-assisted assembly of Ag2O-ZnO composite nanocones for electrochemical detection of 4-Nitrophenol and assessment of their photocatalytic activity towards degradation of 4-Nitrophenol and Methylene blue dye

4-Nitrophenol (4-NP) is an extensively utilized industrial chemical and one of major toxic water pollutant. Therefore, there is an urgent need to monitor the levels of 4-NP from environmental samples as well as its eradication are extremely important. Keeping this as a motivation, this research for the first-time reports microwave-assisted cost-effective synthesis of silver oxide (Ag₂O)-zinc oxide (ZnO) composite nanocones (CNCs, 80-100 nm) for simultaneous electrochemical detection and photodegradation of 4-NP from aqueous solutions. The Ag₂O-ZnO CNCs modified gold electrode was fabricated for electrochemical detection of 4-NP. Such fabricated sensor exhibited a sensitivity of 1.6 µA µM^-1cm^-2, wide linear detection range of 0.4-26 µM & 28-326 µM, and a low limit of detection of 23 nM. The sensor also exhibited good selectivity in real water samples. Also, an outstanding photocatalytic performance of Ag₂O-ZnO CNCs was evaluated towards UV-assisted degradation of 4-NP and organic water pollutant dye, methylene blue. The Ag₂O-ZnO CNCs exhibited excellent electro- and photocatalytic activities due to the formation of p-n nano-heterojunction comprising of p-type Ag₂O and n-type ZnO semiconductor nanoparticles within the composite. Therefore, herein reported smart CNCs can be projected as applied nano-system for cost-effective and rapid simultaneous detection and removal of 4-NP from aqueous solutions. Such nano-system can be useful for industrial application where detection and removal of 4-NP is a key issue to resolve.

Evaluation of the photocatalytic performance of molecularly imprinted S-TiO2 by paper microzones

The paper microzones method (PMZs) is a green chemical method that uses the principle of the three primary colors of red, green and blue (RGB) to detect the water quality of the droplets on white paper. However, this method is rarely used in the performance evaluation of photocatalysts. The paper details the first use of paper microzones utilized in the evaluation of photocatalyst performance. A sol-gel method was used to prepare molecularly imprinted modified TiO₂ photocatalysts for the treatment of different wastewaters, and characterized the catalysts using XRD and several other methods. The reliability of PMZs on the evaluation of photocatalytic activity and selectivity was also analyzed. The following results were obtained: EP-TiO₂ catalysts (EP, ethyl paraben, the imprinting molecule) with different S doping levels were synthesized using a one-step sol-gel method, and the best S doping ratio was found to be n(Ti):n(S) 3:1. S-EP-TiO₂ was found to be 100% anatase and showed excellent photocatalytic performance, while the PMZs method accurately determined changes in RGB levels for the photocatalytic degradation process of pollutants using S-EP-TiO₂ as the photocatalyst. A photocatalytic kinetic analysis showed the PMZs method was quite suitable for the evaluation of photocatalyst activity, but the evaluation of selectivity needs improvement. This method is a promising green chemistry way to evaluate photocatalyst performance and the rapid detection of outdoor sewage water quality.

Insight role of TiO2 to improve the photocatalytic performance of WO3 nanostructures for the efficient degradation of ciprofloxacin

The current research work is to investigate the photocatalytic efficiency and degradation of ciprofloxacin using WO3/TiO2 nanoparticles under visible light irradiation. The nanoparticles of tungsten trioxide (WO3) and its composite with titanium dioxide (TiO2) i.e. WO3/TiO2 was prepared by hydrothermal method. Four basic characterizations were performed to study the prepared sample materials. To study the morphology of the prepared samples, scanning electron microscopy (SEM) was used. The results of SEM clearly showed that tungsten trioxide (WO3) has Rectangular shaped structure. The average size of the pure Tungsten trioxide nanoparticles was about 40–540 nm. The composite of WO3/TiO2 has spherical structure. The reason behind that was the addition of TiO2 in WO3 changes the morphology of pure WO3, and transformed the rectangular structure to a spherical structure. The presence of TiO2 changes the position and orientation of the nanorods in all possible directions. For the detailed analysis of the functional groups present in these samples, band gap, and optical properties of these samples, Fourier transform infrared spectroscopy (FTIR), ultraviolet visible (UV–VIS) spectroscopy and Photoluminescence (PL) emission spectroscopy was used. UV–Vis spectroscopy results showed that the bandgaps of prepared catalysts vary within the range of 2.76 – 2.5 eV. This decrease in bandgap is directly related with the concentration ratio of TiO2 in WO3. The maximum excitation wavelength observed at 440 nm. The maximum degradation efficiency was at 2% of WO3/TiO2 composite catalyst due to unique morphological structure and increase rate of photo absorption.

Effects of Different Delocalized π-Conjugated Systems Towards the TiO2-Based Hybrid Photocatalysts

Modulating the structure of a photocatalyst at the molecular level can improve the photocatalytic efficiency and provides a guide for the synthesis of highly qualified photocatalysts. In this study, TiO2 was modified by various organic compounds to form different TiO2-based hybrid photocatalysts. 1,10-Phenanthroline (Phen) is an organic material with delocalized π-conjugated systems. It was used to modify TiO2 to form the hybrid photocatalyst Phen/TiO2. Furthermore, 1,10-phenanthrolin-5-amine (Phen-NH2) and 1,10-phenanthroline-5-nitro (Phen-NO2) were also used to modify TiO2 to form NH2-Phen/TiO2 and NO2-Phen/TiO2, respectively. The samples of TiO2, Phen/TiO2, NO2-Phen/TiO2, and NH2-Phen/TiO2 were carefully characterized, and their photocatalytic performance was compared. The results indicated that the photocatalytic efficiency followed the order of NH2-Phen/TiO2 > NO2-Phen/TiO2 > Phen/TiO2 > TiO2. It could be found that modifying TiO2 with different organic compounds containing delocalized π-conjugated systems could enhance the photocatalytic ability; furthermore, the level of this enhancement could be modulated by different delocalized π-conjugated systems.

Molecular Imprinting: Green Perspectives and Strategies

Advances in revolutionary technologies pose new challenges for human life; in response to them, global responsibility is pushing modern technologies toward greener pathways. Molecular imprinting technology (MIT) is a multidisciplinary mimic technology simulating the specific binding principle of enzymes to substrates or antigens to antibodies; along with its rapid progress and wide applications, MIT faces the challenge of complying with green sustainable development requirements. With the identification of environmental risks associated with unsustainable MIT, a new aspect of MIT, termed green MIT, has emerged and developed. However, so far, no clear definition has been provided to appraise green MIT. Herein, the implementation process of green chemistry in MIT is demonstrated and a mnemonic device in the form of an acronym, GREENIFICATION, is proposed to present the green MIT principles. The entire greenificated imprinting process is surveyed, including element choice, polymerization implementation, energy input, imprinting strategies, waste treatment, and recovery, as well as the impacts of these processes on operator health and the environment. Moreover, assistance of upgraded instrumentation in deploying greener goals is considered. Finally, future perspectives are presented to provide a more complete picture of the greenificated MIT road map and to pave the way for further development.

Selective adsorption and enhanced photodegradation of diclofenac in water by molecularly imprinted TiO2

In the paper, molecularly imprinted TiO₂ was prepared by surface molecularly imprinted technology and liquid phase deposition method for preferential removal of persistent toxic pollutants from complex environmental water. Diclofenac was selected as the template molecule and target for photodegradation study. The characterization results of SEM, TEM, FTIR and XRD showed that the TiO₂ film with imprinted diclofenac was successfully synthesized on the surface of TiO₂ particles. Meanwhile, the adsorption and photodegradation experiments also indicated that the molecularly imprinted TiO₂ had larger adsorption capacity, better selectivity and higher photodegradation performance for diclofenac than non-imprinted TiO₂. The primary active species and degradation pathways during photodegradation process were also elucidated according to radical capture experiments and UPLC-MS-TOF technology. The prepared molecularly imprinted TiO₂ has the advantages of efficient removal ability, high stability and environmental protection, so it has a wide application value in water treatment and water environmental restoration, especially when involved persistent toxic pollutants.

Innovative utilization of molecular imprinting technology for selective adsorption and (photo)catalytic eradication of organic pollutants

The rapid development of industrialization and urbanization results in a numerous production of various organic chemicals to meet the increasing demand in high-quality life. During the synthesis and utilization of these chemical products, their residues unavoidably emerged in environments to severely threaten human's health. It is thus urgent to exploit effective technology for readily removing the organic pollutants with high selectivity and good reusability. As one of the most promising approaches, molecular imprinting technology (MIT) employs a chemically synthetic route to construct artificial recognition sites in highly-crosslinked matrix with complementary cavity and functional groups to target species, which have been attracting more and more interest for environmental remediation, such as the selective adsorption/separation and improved catalytic degradation of pollutants. In this review, MIT is first introduced briefly to understand their preparing process, recognition mechanism and common imprinted systems. Then, their specific binding affinities are demonstrated for selectively adsorbing and removing target molecules with a large capacity. Furthermore, the innovative utilization of MIT in catalytic eradication of pollutants is comprehensively overviewed to emphasize their enhanced efficiency and improved performances, which are classified by the used catalytically-active nanocrystals and imprinted systems. After summarizing recent advances in these fields, some limitations are discussed and possible suggestions are given to guide the future exploitation on MIT for environmental protection.

Potential of TiO2 with Various Au Nanoparticles for Catalyzing Mesotrione Removal from Wastewaters under Sunlight

Nowadays, great focus is given to the contamination of surface and groundwater because of the extensive usage of pesticides in agriculture. The improvements of commercial catalyst TiO₂ activity using different Au nanoparticles were investigated for mesotrione photocatalytic degradation under simulated sunlight. The selected system was 2.43 × 10⁻³% Au–S–CH₂–CH₂–OH/TiO₂ (0.5 g/L) that was studied by transmission electron microscopy and ultraviolet-visible (UV-Vis) spectroscopy. It was found that TiO₂ particles size was ~20 nm and ~50 nm, respectively. The Au nanoparticles were below 10 nm and were well distributed within the framework of TiO₂. For 2.43 × 10⁻³% Au–S–CH₂–CH₂–OH/TiO₂ (0.5 g/L), band gap energy was 2.45 eV. In comparison to the pure TiO₂, addition of Au nanoparticles generally enhanced photocatalytic removal of mesotrione. By examining the degree of mineralization, it was found that 2.43 × 10⁻³% Au–S–CH₂–CH₂–OH/TiO₂ (0.5 g/L) system was the most efficient for the removal of the mesotrione and intermediates. The effect of tert-butanol, NaF and ethylenediaminetetraacetic acid disodium salt on the transformation rate suggested that the relative contribution of various reactive species changed in following order: h⁺ > ^●OH_ads > ^●OH_bulk. Finally, several intermediates that were formed during the photocatalytic treatment of mesotrione were identified.

Intimate coupling of photocatalysis and biodegradation for wastewater treatment: Mechanisms, recent advances and environmental applications

Due to the increase of emerging contaminants in water, how to use new treatment technology to make up for the defects of traditional wastewater treatment method has become one of the research hotspots at present. Intimate coupling of photocatalysis and biodegradation (ICPB) as a novel wastewater treatment method, which combines the advantages of biological treatment and photocatalytic reactions, has shown a great potential as a low-cost, environmental friendly and sustainable treatment technology. The system mainly consists of photocatalytic materials, porous carriers and biofilm. The key principle of ICPB is to transform bio-recalcitrant pollutants into biodegradable products by photocatalysis on the surface of porous carriers. The biodegradable products were mineralized simultaneously through the biofilm inside the carriers. Because of the protection of the carriers, the microorganism can remain active even under the UV-light, the mechanical force of water flow or the attack of free radicals. ICPB breaks the traditional concept that photocatalytic reaction and biodegradation must be separated in different reactors, improves the purification capacity of sewage and saves the cost. This review summarizes the recent advances of ICPB photocatalysts, carriers and biofilm being applied, and focuses on the mechanisms and reactor configurations which is particularly novel. Furthermore, the possible ongoing researches on ICPB are also put forward. This review will provide a valuable insight into the design and application of ICPB in environment and energy field.

Selective Adsorption and Photocatalytic Degradation of Extracellular Antibiotic Resistance Genes by Molecularly-Imprinted Graphitic Carbon Nitride

There is a growing need to mitigate the discharge of extracellular antibiotic resistance genes (ARGs) from municipal wastewater treatment systems. Here, molecularly-imprinted graphitic carbon nitride (MIP-C₃N₄) nanosheets were synthesized for selective photocatalytic degradation of a plasmid-encoded ARG (bla_NDM-1, coding for multidrug resistance New Delhi metallo-β-lactamase-1) in secondary effluent. Molecular imprinting with guanine enhanced ARG adsorption, which improved the utilization of photogenerated oxidizing species to degrade bla_NDM-1 rather than being scavenged by background nontarget constituents. Consequently, photocatalytic removal of bla_NDM-1 in secondary effluent with MIP-C₃N₄ (k = 0.111 ± 0.028 min^-1) was 37 times faster than with bare graphitic carbon nitride (k = 0.003 ± 0.001 min^-1) under UVA irradiation (365 nm, 3.64 × 10^-6 Einstein/L·s). MIP-C₃N₄ can efficiently catalyze the fragmentation of bla_NDM-1, which decreased the potential for ARG repair by transformed bacteria. Molecular imprinting also changed the primary degradation pathway; electron holes (h⁺) were the predominant oxidizing species responsible for bla_NDM-1 removal with MIP-C₃N₄ versus free radicals (i.e., ·OH and O₂^-) for coated but nonimprinted C₃N₄. Overall, MIP-C₃N₄ efficiently removed bla_NDM-1 from secondary effluent, demonstrating the potential for molecular imprinting to enhance the selectivity and efficacy of photocatalytic processes to mitigate dissemination of antibiotic resistance from sewage treatment systems.

Evaluation of photocatalytic selectivity of Ag/Zn modified molecularly imprinted TiO2 by multiwavelength measurement

In this paper, Ag/Zn-MIP-TiO₂ was prepared by sol-gel method, and the imprinted molecule was ethyl p-hydroxybenzoate. To study the properties of the Ag/Zn-MIP-TiO₂ on the photocatalytic activity, these factors were investigated: the effects of the dosage of Ag and Zn, the amount of imprinted molecules, the calcination temperature and time, then the capture of active substances. Besides, the selectivity of Ag/Zn-MIP-TiO₂ was investigated in three aspects: UV-vis multi-wavelength spectral integral area change, specific group absorbance change and traditional reaction kinetic parameter change. The selectivity coefficients of the three angles are 8.55, 1.47 and 6.77. And the selectivity factors are 4.12, 1.02 and 4.81, indicating that Ag/Zn-MIP-TiO₂ has high selectivity. Furthermore, its selectivity is not only for the specific characteristic groups on the target pollutants, but for the integrated target pollutants. From the perspective of materials, Ag/Zn-MIP-TiO₂ is 100% anatase with a lower band gap and a larger specific surface area. As a molecularly imprinted polymer, the active sites on the surface make it have selective recognition function. The results of photocatalytic experiments are as follows: the optimum Ag and Zn ratio is Ti:Ag:Zn = 100:1:0.75 (molar ratio); the best molecular weight of imprint is Ti:MIP = 5:1; the finest calcination temperature is 500 °C; the optimum calcination time is 2 h; the removal rate of ethyl p-hydroxybenzoate degraded by photocatalysis for 2 h is 99.1%; the main active substance of the photocatalytic reaction is •OH.

Artificial Cytochrome c Mimics: Graphene Oxide-Fe(III) Complex-Coated Molecularly Imprinted Colloidosomes for Selective Photoreduction of Highly Toxic Pollutants

Our previous works showed that the molecularly imprinted TiO₂ photocatalyst has been one of the most efficient materials for selective photooxidation of highly toxic organic pollutants (HTOPs) from complicated wastewater. However, some highly toxic pollutants (e.g., heavy metals) are very stable under the oxidizing environment. Therefore, the design of enzyme-like catalysts to selectively reduce highly toxic pollutants is extremely needed. In this work, inspired by the bioreduction ability of cytochrome c (cyt c, a heme containing metalloprotein), we presented a simple and efficient way to generate an artificial cyt c mimic (ACM) using graphene oxide (GO)-Fe(III) complex-coated molecularly imprinted colloidosomes. Prior to loading of Fe(III) centers to GO for constructing ACMs, GO-coated molecularly imprinted colloidosomes were synthesized via Pickering emulsion polymerization. Similar to a nature cyt c, the ACM contained both the molecular recognition element (molecularly imprinted cavity) and the non-heme electron sink (GO-Fe(III) complex), which resulted in the ACMs having good selectivity toward the enzyme-like reduction of the highly toxic target Cr(VI). Moreover, by using HepG2 cells as model cells, the Cr(VI) solution after treating by ACMs was proved to be safe and nontoxic. To confirm that the present method was universal for constructing ACMs, various GO-Fe(III) complex-coated molecularly imprinted colloidosomes, which could selectively photoreduce other highly toxic inorganic ions and organic pollutants, were also investigated. The ACMs described herein will act as a vector that encourages the design of more functional non-heme enzymes in sensing, environmental separation, clinical diagnose, and delivery of therapeutic agents.

A dual surface inorganic molecularly imprinted Bi2WO6-CuO/Ag2O heterostructure with enhanced activity-selectivity towards the photocatalytic degradation of target contaminants

The proposed mechanism reveals that under visible light, MG and AO dyes can be selectively degraded by produced radicals at the surface of the inorganic molecularly imprinted Ag₂O-CuO-Bi₂WO₆ heterojunction.

WO3 in suit embed into MIL-101 for enhancement charge carrier separation of photocatalyst

Compositing nanoparticles photo-catalyst with enormous surface areas metal–organic framework (MOF) will greatly improve photocatalytic performances. Herein, WO₃ nanoparticles are partly embedded into pores of MIL-101 or only supported on the outside of representative MIL-101, which were defined as embedded structure WO₃@MIL-101@WO₃ and coating structure WO₃&MIL-101 respectively. Different pH, concentration and loading percentage were researched. XRD, TEM and BET were carried to analyze the composites. Compared with the pristine WO₃, all WO₃ loaded MOF nanocomposites exhibited remarkable enhancing for the efficiency of photocatalytic degradation methylene blue under visible light. Their activity of the same loading percentage WO₃ in embedded structure and coating structure have increased for 9 and 3 times respectively compared with pure WO₃. The WO₃@MIL-101@WO₃ has 3 times higher efficiency than WO₃&MIL-101, because the shorter electron-transport distance can make a contribution to electron–hole separation. The further mechanism involved has been investigated by radical quantify experiment, XPS and photoluminescence spectroscopy.

Synthesis and Applications of Molecularly Imprinted Polymers Modified TiO₂ Nanomaterials: A Review

Titanium dioxide (TiO₂) nanomaterials have caused a widespread concern in the past several decades for their bulk characteristics and potential applications in many different areas. Lately, the combination between molecularly imprinted polymers (MIPs) and TiO₂ nanomaterials have been proven to improve the relative adsorption capacity, selectivity and accelerate the rate of mass transfer of analyte which is not possible using TiO₂ alone. Considering the unique performance of the MIPs modified TiO₂ nanomaterials, this review intends to give an overview of the recent progresses in the development of MIPs modified TiO₂ nanomaterials, the potential applications of their tailor-made characteristics. The limitations and challenges in this practically promising nanomaterials have also been raised and summarized. By means of the points raised in this article, we would like to provide some assistance for further development of preparation methodologies and the expansion of some potential applications in the field of MIPs modified TiO₂ nanomaterials.

Easily Recoverable, Micrometer-Sized TiO2 Hierarchical Spheres Decorated with Cyclodextrin for Enhanced Photocatalytic Degradation of Organic Micropollutants

Micrometer-sized titanium dioxide hierarchical spheres (TiO₂-HS) were assembled from nanosheets to address two common limitations of photocatalytic water treatment: (1) inefficiency associated with scavenging of oxidation capacity by nontarget water constituents and (2) energy-intensive separation and recovery of the photocatalyst slurry. These micrometer-sized spheres are amenable to low-energy separation, and over 99% were recaptured from both batch and continuous flow reactors using microfiltration. Using nanosheets as building blocks resulted in a large specific surface area-3 times larger than that of commercially available TiO₂ powder (Evonik P25). Anchoring food-grade cyclodextrin onto TiO₂-HS (i.e., CD-TiO₂-HS) provided hydrophobic cavities to entrap organic contaminants for more effective utilization of photocatalytically generated reactive oxygen species. CD-TiO₂-HS removed over 99% of various contaminants with dissimilar hydrophobicity (i.e., bisphenol A, bisphenol S, 2-naphthol, and 2,4-dichlorophenol) within 2 h under a low-intensity UVA input (3.64 × 10^-6 einstein/L/s). As with other catalyst (including TiO₂ slurry), periodic replacement or replenishment would be needed to maintain high treatment efficiency (e.g., we demonstrate full reactivation through simple reanchoring of CD). Nevertheless, this task would be offset by significant savings in photocatalyst separation. Thus, CD-TiO₂-HS is an attractive candidate for photocatalytic water and wastewater treatment of recalcitrant organic pollutants.

Carbon dots-decorated Na2W4O13 composite with WO3 for highly efficient photocatalytic antibacterial activity

Photodisinfection by semiconductors has been proven to be an effective method for achieving antibacterial or antifungal activity. However, the toxicity of the nanomaterial to the environment and organisms is a major concern. Herein, a highly efficient and environmentally friendly photodisinfection material of a carbon dots (CDs) decorated Na₂W₄O₁₃ composite with WO₃ photocatalyst was fabricated via a facile hydrothermal-calcination approach. The TEM (transmission electron microscopy) images showed that CDs decorated the surface of the Na₂W₄O₁₃ flakes. Compared with the samples without incorporated CDs, the as-synthesized composite of CDs/Na₂W₄O₁₃/WO₃ exhibited excellent antimicrobial activity against E. coli under visible light illumination. Electron spin resonance (ESR) spectroscopy and reactive species scavenging experiments revealed that the hydroxyl radicals and superoxide radical anions played the most important role in the photocatalytic bacterial inactivation. Furthermore, the cytotoxicity of the CDs/Na₂W₄O₁₃/WO₃ composite was evaluated by analyzing the viability of HepG2 and Chinese hamster lung (V79) cells using Cell Counting Kit-8 (CCK-8).

Recent Progress of Imprinted Nanomaterials in Analytical Chemistry

Molecularly imprinted polymers (MIPs) are a type of tailor-made materials that have ability to selectively recognize the target compound/s. MIPs have gained significant research interest in solid-phase extraction, catalysis, and sensor applications due to their unique properties such as low cost, robustness, and high selectivity. In addition, MIPs can be prepared as composite nanomaterials using nanoparticles, multiwalled carbon nanotubes (MWCNTs), nanorods, quantum dots (QDs), graphene, and clays. This review paper aims to demonstrate and highlight the recent progress of the applications of imprinted nanocomposite materials in analytical chemistry.