Reduced toxicity of olive mill waste waters by oxidative coupling with biomimetic catalysis

Different Weed Managements Influence the Seasonal Floristic Composition in a Super High-Density Olive Orchard

Weed management is not yet environmentally, agronomically, economically and socially sustainable in olive orchards. It is necessary to study appropriate integrated weed management systems (IWMSs) based on the knowledge of weed population and effects of weeding practices over time. The aim of this study was to evaluate the effects of different weed managements on seasonal floristic composition of a super high-density olive orchard, also exploiting the essential principles of an IWMS. Five weeding techniques were compared: chemical control (CHI), mowing (MEC), plastic (nonwoven tissue, TNT and polyethylene, PEN) and organic (with de-oiled olive pomace, DOP) mulching. Weed monitoring was carried out on six dates in a three-year period. The infestation of each of the main 18 weed species recorded (%) and the total infestation (%) on each monitoring date were determined. Results underlined that all weeding practices investigated in this multi-year study affected the floristic composition, weed characteristics (hemicryptophytes, cryptophytes and therophytes) and seed bank. TNT and PEN were the most effective methods for weed management. Particularly, total infestation coefficient was significantly lowest when plots were managed with TNT (13.91%) and PEN (14.38%) and highest for MEC (141.29%). However, DOP also significantly reduced infestation compared to CHI and MEC. Therefore, DOP could constitute an excellent strategy for weed management in super high-density olive groves, since it also has the possibility of distributing mulching materials in a mechanized way in field and can result in improvement of soil fertility and the possibility of valorizing waste. Further studies should be carried out to investigate the mechanism of action (physical and allelochemical) of de-oiled pomace or other organic agro-industrial materials and the recovery time of these mulching materials in super high-density olive orchards.

NMR spectroscopy of wastewater: A review, case study, and future potential

NMR spectroscopy is arguably the most powerful tool for the study of molecular structures and interactions, and is increasingly being applied to environmental research, such as the study of wastewater. With over 97% of the planet's water being saltwater, and two thirds of freshwater being frozen in the ice caps and glaciers, there is a significant need to maintain and reuse the remaining 1%, which is a precious resource, critical to the sustainability of most life on Earth. Sanitation and reutilization of wastewater is an important method of water conservation, especially in arid regions, making the understanding of wastewater itself, and of its treatment processes, a highly relevant area of environmental research. Here, the benefits, challenges and subtleties of using NMR spectroscopy for the analysis of wastewater are considered. First, the techniques available to overcome the specific challenges arising from the nature of wastewater (which is a complex and dilute matrix), including an examination of sample preparation and NMR techniques (such as solvent suppression), in both the solid and solution states, are discussed. Then, the arsenal of available NMR techniques for both structure elucidation (e.g., heteronuclear, multidimensional NMR, homonuclear scalar coupling-based experiments) and the study of intermolecular interactions (e.g., diffusion, nuclear Overhauser and saturation transfer-based techniques) in wastewater are examined. Examples of wastewater NMR studies from the literature are reviewed and potential areas for future research are identified. Organized by nucleus, this review includes the common heteronuclei (¹³C, ¹⁵N, ¹⁹F, ³¹P, ²⁹Si) as well as other environmentally relevant nuclei and metals such as ²⁷Al, ⁵¹V, ²⁰⁷Pb and ¹¹³Cd, among others. Further, the potential of additional NMR methods such as comprehensive multiphase NMR, NMR microscopy and hyphenated techniques (for example, LC-SPE-NMR-MS) for advancing the current understanding of wastewater are discussed. In addition, a case study that combines natural abundance (i.e. non-concentrated), targeted and non-targeted NMR to characterize wastewater, along with in vivo based NMR to understand its toxicity, is included. The study demonstrates that, when applied comprehensively, NMR can provide unique insights into not just the structure, but also potential impacts, of wastewater and wastewater treatment processes. Finally, low-field NMR, which holds considerable future potential for on-site wastewater monitoring, is briefly discussed. In summary, NMR spectroscopy is one of the most versatile tools in modern science, with abilities to study all phases (gases, liquids, gels and solids), chemical structures, interactions, interfaces, toxicity and much more. The authors hope this review will inspire more scientists to embrace NMR, given its huge potential for both wastewater analysis in particular and environmental research in general.

Recent advances in metalloporphyrins for environmental and energy applications

Porphyrin-based chemistry has reached an unprecedented period of rapid development after decades of study. Due to attractive multifunctional properties, porphyrins and their analogues have emerged as multifunctional organometals for environmental and energy purposes. In particular, pioneer works have been conducted to explore their application in pollution abatement, energy conversion and storage and molecule recognition. This review summarizes recent advances of porphyrins chemistry, focusing on elucidating the nature of catalytic process. The Fenton-like redox chemistry and photo-excitability of porphyrins and their analogues are discussed, highlighting the generation of high-valent iron oxo porphyrin species. Finally, challenges in current research are identified and perspectives for future development in this area are presented.

Biochars from olive mill waste have contrasting effects on plants, fungi and phytoparasitic nematodes

Olive mill waste (OMW), a byproduct from the extraction of olive oil, causes serious environmental problems for its disposal, and extensive efforts have been made to find cost-effective solutions for its management. Biochars produced from OMW were applied as soil amendment and found in many cases to successfully increase plant productivity and suppress diseases. This work aims to characterize biochars obtained by pyrolysis of OMW at 300 °C to 1000 °C using ¹³C NMR spectroscopy, LC-ESI-Q-TOF-MS and SEM (Scanning Electron Microscopy). Chemical characterization revealed that biochar composition varied according to the increase of pyrolysis temperature (PT). Thermal treated materials showed a progressive reduction of alkyl C fractions coupled to the enrichment in aromatic C products. In addition, numerous compounds present in the organic feedstock (fatty acids, phenolic compounds, triterpene acids) reduced (PT = 300 °C) or completely disappeared (PT ≥ 500 °C) in biochars as compared to untreated OMW. PT also affected surface morphology of biochars by increasing porosity and heterogeneity of pore size. The effects of biochars extracts on the growth of different organisms (two plants, one nematode and four fungal species) were also evaluated. When tested on different living organisms, biochars and OMW showed opposite effects. The root growth of Lepidium sativum and Brassica rapa, as well as the survival of the nematode Meloidogyne incognita, were inhibited by the untreated material or biochar produced at 300 °C, but toxicity decreased at higher PTs. Conversely, growth of Aspergillus, Fusarium, Rhizoctonia and Trichoderma fungi was stimulated by organic feedstock, while being inhibited by thermally treated biochars. Our findings showed a pattern of association between specific biochar chemical traits and its biological effects that, once mechanistically explained and tested in field conditions, may lead to effective applications in agriculture.

Valorization of treated olive mill wastewater in fertigation practice

Olive mill wastewater (OMW) brings about a major environmental problem in Tunisia as well as in the other Mediterranean countries. Its strong organic load and its toxicity due to the presence of complex phenolic compounds have dire effects when applied to soil. To overcome this difficulty, the OMW pretreatment was investigated in the present work using the Fenton oxidation reaction with zero-valent iron. Then, this pretreated wastewater was valorized in fertigation practice. The effects of the addition of different concentrations of both treated and raw OMW on soil and cropping system were investigated. The treatment by Fenton oxidation with zero-valent iron could reduce 50 % of COD and decrease 53 % of phenolic compounds. OMW application had a temporary effect on the soil pH and EC. The results showed that the evolution of soil pH and EC was related to the organic matter of the soil which depends on the spread concentrations of raw or treated OMW. After 15-day incubation period, the soil pH and EC tended to stabilize and return to the control level. Moreover, this stabilization is faster in treated OMW than that in raw OMW especially for concentrations as high as 3 and 4 %. Plants cultivated with treated OMW showed an increase in their germination. The results pointed an improvement in the stem length of plants which is almost similar to that of the control for both pea and tomato, especially for high concentrations of 3 and 4 %.

Understanding the role of manganese dioxide in the oxidation of phenolic compounds by aqueous permanganate

Recent studies have shown that manganese dioxide (MnO2) can significantly accelerate the oxidation kinetics of phenolic compounds such as triclosan and chlorophenols by potassium permanganate (Mn(VII)) in slightly acidic solutions. However, the role of MnO2 (i.e., as an oxidant vs catalyst) is still unclear. In this work, it was demonstrated that Mn(VII) oxidized triclosan (i.e., trichloro-2-phenoxyphenol) and its analogue 2-phenoxyphenol, mainly generating ether bond cleavage products (i.e., 2,4-dichlorophenol and phenol, respectively), while MnO2 reacted with them producing appreciable dimers as well as hydroxylated and quinone-like products. Using these two phenoxyphenols as mechanistic probes, it was interestingly found that MnO2 formed in situ or prepared ex situ greatly accelerated the kinetics but negligibly affected the pathways of their oxidation by Mn(VII) at acidic pH 5. The yields (R) of indicative products 2,4-dichlorophenol and phenol from their respective probes (i.e., molar ratios of product formed to probe lost) under various experimental conditions were quantified. Comparable R values were obtained during the treatment by Mn(VII) in the absence vs presence of MnO2. Meanwhile, it was confirmed that MnO2 could accelerate the kinetics of Mn(VII) oxidation of refractory nitrophenols (i.e., 2-nitrophenol and 4-nitrophenol), which otherwise showed negligible reactivity toward Mn(VII) and MnO2 individually, and the effect of MnO2 was strongly dependent upon its concentration as well as solution pH. These results clearly rule out the role of MnO2 as a mild co-oxidant and suggest a potential catalytic effect on Mn(VII) oxidation of phenolic compounds regardless of their susceptibility to oxidation by MnO2.

Recovery of antioxidants from olive mill wastewaters: a viable solution that promotes their overall sustainable management

Olive mill wastewaters (OMW) are rich in water-soluble polyphenolic compounds that show remarkable antioxidant properties. In this work, the recovery yield of compounds, such as hydroxytyrosol and tyrosol, as well as total phenols (TPh) from real OMW was investigated. Antioxidants were recovered by means of liquid-liquid solvent extraction. For this purpose, a laboratory-scale pilot unit was established and the effect of various organic solvents, namely ethyl acetate, diethyl ether and a mixture of chloroform/isopropyl alcohol, on process efficiency was investigated. It was found that the performance of the three extraction systems decreased in the order: ethyl acetate > chloroform/isopropanol > diethyl ether, in terms of their antioxidant recovery yield. It was estimated that treatment of 1 m(3) OMW with ethyl acetate could provide 0.247 kg hydroxytyrosol, 0.062 kg tyrosol and 3.44 kg of TPh. Furthermore, the environmental footprint of the whole liquid-liquid extraction system was estimated by means of the life cycle assessment (LCA) methodology to provide the best available and most sustainable extraction technique. From an environmental perspective, it was found that ethyl acetate and diethyl ether had similar environmental impacts. Specifically, for the production of 1 g hydroxytyrosol, tyrosol or TPh, 13.3, 53.1 or 0.949 kg CO2 equivalent would be released to the atmosphere, respectively. On the other hand, the chloroform/isopropyl alcohol mixture had detrimental effects onto ecosystems, human health and fossil fuels resources. In total, ethyl acetate yields low environmental impacts and high antioxidant recovery yield and thus it can be considered as the best solution, both from the environmental and technical point of view. Three alternative scenarios to improve the recovery performance and boost the sustainability of the ethyl acetate extraction system were also investigated and their total environmental impacts were estimated. It was found that with small process modifications the environmental impacts could be reduced by 29%, thus achieving a more sustainable antioxidants recovery process.

Olive oil mill wastewaters before and after treatment: a critical review from the ecotoxicological point of view

The olive oil mill wastewater (OMW) is a problematic and polluting effluent which may degrade the soil and water quality, with critical negative impacts on ecosystems functions and services provided. The main purpose of this review paper is presenting the state of the art of OMW treatments focusing on their efficiency to reduce OMW toxicity, and emphasizing the role of ecotoxicological tests on the evaluation of such efficiency before the up-scale of treatment methodologies being considered. In the majority of research works, the reduction of OMW toxicity is related to the degradation of phenolic compounds (considered as the main responsible for the toxic effects of OMW on seed germination, on bacteria, and on different species of soil and aquatic invertebrates) or the decrease of chemical oxygen demand content, which is not scientifically sound. Batteries of ecotoxicological tests are not applied before and after OMW treatments as they should be, thus leading to knowledge gaps in terms of accurate and real assessment of OMW toxicity. Although the toxicity of OMW is usually high, the evaluation of effects on sub-lethal endpoints, on individual and multispecies test systems, are currently lacking, and the real impacts yielded by its dilution, in freshwater trophic chains of receiving systems can not be assessed. As far as the terrestrial compartment is considered, ecotoxicological data available include tests only with plants and the evaluation of soil microbial parameters, reflecting concerns with the impacts on crops when using OMW for irrigation purposes. The evaluation of its ecotoxicity to other edaphic species were not performed giving rise to a completely lack of knowledge about the consequences of such practice on other soil functions. OMW production is a great environmental problem in Mediterranean countries; hence, engineers, chemists and ecotoxicologists should face this problem together to find an ecologically friend solution.