Efficient photocatalytic removal of NO in indoor air with hierarchical bismuth oxybromide nanoplate microspheres under visible light

Heterojunction structured BiOCl-Bi2S3 nanosheets as mitochondria-targeted near-infrared photothermal and photodynamic therapy agent

Mitochondria-targeted phototherapy, especially combined photothermal therapy (PTT) and photodynamic therapy (PDT), has been regarded as an attractive strategy for the treatment of tumor. In this study, a facile approach to prepare two-dimensional (2D) BiOCl-Bi₂S₃ nanostructures was developed, where Bi₂S₃ quantum dots were doped in/on the ultrathin BiOCl nanosheets, forming a p-n heterojunction. The BiOCl-Bi₂S₃ shows favorable photothermal conversion efficiency (32%) and synergistically reactive oxygen species (ROS) generating capability under near-infrared (NIR) irradiation. Moreover, the conjugation of synthetic targeting ligand to the surface of BiOCl-Bi₂S₃ endows the heterojunction effective tumor targeting ability and selective mitochondrial accumulation. The combined cancer targeting ability and synergistic PTT/PDT permit enhanced cooperative phototherapeutic efficiency of the 2D heterojunction. This study provides an attractive way for designing new class of heterostructure materials for potential applications in subcellular-targeted phototherapy.

Typical layered structure bismuth-based photocatalysts for photocatalytic nitrogen oxides oxidation

Traditional NO_x treatment methods require external reducing reagents and harsh reaction conditions, which is not conducive to effectively eliminate NO_x at low concentration, especially at ppb levels. Fortunately, low concentration NO_x can be removed by photocatalytic oxidation under mild reaction conditions. Bismuth (Bi)-based photocatalysts with the layered structure have obtained considerable concerns of photocatalytic NO_x oxidation. This review focused on typical layered Bi-based photocatalysts (Bi₂WO₆, Bi₂O₂CO₃, BiOY (YCl, Br, and I), BiOIO₃, and BiOCOOH) with the structure of [Bi₂O₂]²⁺ layer for photocatalytic NO_x oxidation. The strategies (morphological control, defect engineering, heterostructure construction, etc.) to improve photocatalytic oxidation activity were summarized. Furthermore, the mechanism involving various free radicals (hydroxyl radical, superoxide radical, etc.) of photocatalytic oxidation of NO_x was proposed. In addition, the non-NO₂ selectivity was also illuminated. Lastly, the current drawbacks and further research directions for photocatalytic NO_x oxidation were elaborated. The development of photocatalysts with high photocatalytic activity, wide light absorption range, and non-NO₂ selectivity is the focus of future research. This review aims to provide a pandect and theoretical guidance for the practical application of photocatalytic oxidation of NO_x.

2D MoS2/BiOBr van der Waals heterojunctions by liquid-phase exfoliation as photoelectrocatalysts for hydrogen evolution

As a semiconductor used for the photocatalytic hydrogen evolution reaction (HER), BiOBr has received intensive attention in recent years. However, the high recombination of photoexcited charge carriers results in poor photocatalytic efficiency. The combination with other photoactive semiconductors might represent a valuable approach to deal with the intrinsic limitations of the material. Given that BiOBr has a 2D structure, we propose a simple liquid-phase exfoliation method to peel BiOBr microspheres into few-layer nanosheets. By tuning the weight ratio between the precursors, we prepare a series of 2D MoS₂/BiOBr van der Waals (vdW) heterojunctions and study their behaviour as (photo)electrocatalysts for the HER, finding dramatic differences as a function of weight composition. Moreover, we found that pristine 2D BiOBr and the heterojunctions, with the exception of the 1% MoS₂/BiOBr composition, undergo photocorrosion, with BiOBr being reduced to metallic Bi. These findings provide useful guidelines to design novel 2D material-based (photo)electrocatalysts for the production of sustainable fuels.

Carbon Dots Mediated In Situ Confined Growth of Bi Clusters on g-C3 N4 Nanomeshes for Boosting Plasma-Assisted Photoreduction of CO2

Synthesis of high-efficiency, cost-effective, and stable photocatalysts has long been a priority for sustainable photocatalytic CO₂ reduction reactions (CRR), given its importance in achieving carbon neutrality goals under the new development philosophy. Fundamentally, the sluggish interface charge transportation and poor selectivity of products remain a challenge in the CRR progress. Herein, this work unveils a synergistic effect between high-density monodispersed Bi/carbon dots (CDs) and ultrathin graphite phase carbon nitride (g-C₃ N₄ ) nanomeshes for plasma-assisted photocatalytic CRR. The optimal g-C₃ N₄ /Bi/CDs heterojunction displays a high selectivity of 98% for CO production with a yield up to 22.7 µmol g^-1 without any sacrificial agent. The in situ confined growth of plasmonic Bi clusters favors the production of more hot carriers and improves the conductivity of g-C₃ N₄ . Meanwhile, a built-in electric field driving force modulates the directional injection photogenerated holes from plasmonic Bi clusters and g-C₃ N₄ photosensitive units to adjacent CDs reservoirs, thus promoting the rapid separation and oriented transfer in the CRR process. This work sheds light on the mechanism of plasma-assisted photocatalytic CRR and provides a pathway for designing highly efficient plasma-involved photocatalysts.

C-scheme electron transfer mechanism: An efficient ternary heterojunction photocatalyst carbon quantum dots/Bi/BiOBr with full ohmic contact

With a facile one-pot solvothermal method, an efficient ternary heterojunction photocatalyst carbon quantum dots (CQDs)/Bi/BiOBr is firstly prepared. Ethylene glycol (EG) is used as the solvent and carbon source for the first time. At 190 °C for 3 h, while BiOBr is synthesized, EG is employed to prepare CQDs through bottom-up method. CQDs are grafted by a large number of functional groups with reducibility, which reduce some neighboring BiO⁺ to metal Bi. By modifying the solvothermal temperature and time, CQDs and Bi are in-situ controllably deposited on the surface of BiOBr microspheres. Due to different Fermi levels and work functions, the interfaces of CQDs, BiOBr and Bi are connected through ohmic junctions with low contact impedance. The hot electrons from Bi with surface plasmon resonance (SPR) properties, and electrons in the CB of BiOBr flow to CQDs, forming a C-scheme electron transfer mechanism. O₂^- from CQDs and h⁺ in the VB of BiOBr respectively attack the sites with higher and lower electron density in methyl orange (MO) molecule, resulting in its photodegradation into small molecular products.

Photocatalytic NOx Removal in Bismuth-Oxyhalide (BiOX, X = I, Cl) Cement-Based Materials Exposed to Outdoor Conditions

Cement-based materials modified with 3D BiOX (X = I, Cl) microspheres at different percentages (1, 5 and 10% by weight of the cement binder) were prepared to investigate the durability of the photocatalytic NOx removal under outdoor conditions. Weathering—corresponding to a period of 13 months outdoors—was studied in terms of NO removal efficiency under visible and UVA light irradiation for BiOI and BiOCl mortars, respectively. Following this period, the samples were protected from the environment for four years, and NOx removal and selectivity to nitrates were assessed. BiOI and BiOCl mortar samples were initially photocatalytically active; NOx removal performance increased as BiOX content increased. There was good photocatalyst dispersion, and compressive strength was not significantly impacted. The BiOI mortars had nearly completely lost their activity after 5 years from casting, whereas mortars containing 10% BiOCl had maintained about 7% of initial performance. The results suggest that mortar deactivation is due to surface dirt and nitrates accumulation from NOx oxidation on the surface rather than carbonation. An internal self-deactivation mechanism that affects BiOI in mortar matrix has also been postulated.

Construction and Activity of an All-Organic Heterojunction Photocatalyst Based on Melem and Pyromellitic Dianhydride

The separation efficiency of photogenerated carriers in the g-C₃ N₄ system could be improved by the construction of all-organic heterojunctions. However, g-C₃ N₄ has a large π-π conjugated plane that induces a low number of amino groups (-NH₂ ), which are the sites of the heterojunction reaction with organic molecules. In this case, few heterojunction knots can be constructed, and the enhancement effect of the heterojunction cannot be fully displayed. In this study, an all-organic heterojunction with PMDA is constructed with melem instead of g-C₃ N₄ . Although the photocatalytic activity of melem is far below that of g-C₃ N₄ , the photocatalytic activity of PI (the all-organic heterojunction constructed with melem) is considerably higher than that of CP (the all-organic heterojunction constructed with g-C₃ N₄ ). This result is attributed to melem that has more -NH₂ groups to form more heterojunction knots, which can enable the effective transfer and separation of electron-hole pairs. These new findings may shed light on the design of all-organic heterojunction photocatalysts.

A facile synthesis of palladium nanoparticles decorated bismuth oxybromide nanostructures with exceptional photo-antimicrobial activities

Assessing the interaction between microbes and nanocatalysts for finding an inclusive, proactive and deep understanding of nanoparticles-based toxicity is vital for discovering their broad range of applications. Palladium based photocatalysts owing to their unique fundamental characteristics and brilliant physicochemical potential have gained immense interest in environment remediation as disinfection system. In the present study, we report synthesis of a novel palladium nanoparticles decorated bismuth oxybromide (Pd/BiOBr) nanostructures using an energy efficient solution-based method, having excellent photocatalytic antibacterial action. The synthesized nanomaterials was thoroughly characterized using various analytical techniques. The photocatalytic antibacterial efficiency of Pd/BiOBr was evaluated against some common pathogenic strains of Gram-positive and Gram-negative bacteria (Pseudomonas fluorescens, Pseudomonas aeruginosa, Escherichia coli, Aeromonas salmonicida, Salmonella typhimurium, Klebsiella pneumoniae, Bacillus subtilis). In our results Pd/BiOBr showed excellent photocatalytic disinfection efficacy with > 99.9% bacterial inactivation. A very low concentration of Pd/BiOBr (0.5 µg/mL) effectively inhibited the bacterial growth in response to just 2 h of visible light irradiation, while 1 µg/mL of Pd/BiOBr completely killed all the tested bacterial strains proving their magnificent bactericidal potential. The developed materials with exceptional antibacterial broad range efficiency can be used in different photocatalytic disinfection systems including water purification systems, biofilm exclusion and combating differential antibiotic resistance.

High-performance photocatalytic decomposition of PFOA by BiOX/TiO2 heterojunctions: Self-induced inner electric fields and band alignment

BiOX (X = Cl, Br and I) and BiOX/TiO₂ photocatalysts were prepared by a facile hydrothermal approach. The BiOX/TiO₂ heterojunctions demonstrated significantly enhanced efficiency for photocatalytic decomposition of perfluorooctanoic acid (PFOA) compared with sole BiOX or TiO₂. PFOA (10 mg L¹) was completely degraded by BiOCl(Br)/TiO₂ in 8 h. Moreover, BiOCl/TiO₂ attained deep decomposition of PFOA with a high defluorination ratio of 82%. The p-n heterojunctions between BiOX and TiO₂ were confirmed by a series of characterizations. The photo-induced holes would migrate from the valance band (VB) of TiO₂ to BiOX, driven by the built-in electric field (BIEF) near the interfaces of p-n heterojunctions, the inner electric fields (IEF) in BiOX and the higher VB position of BiOX. The X-ray diffraction (XRD) and TEM characterizations indicated that TiO₂ combined with BiOX along the [110] facet, which facilitated photo-induced electron transfer in the [001] direction, thus benefiting PFOA decomposition.

Singlet Oxygen and Mobile Hydroxyl Radicals Co-operating on Gas-Solid Catalytic Reaction Interfaces for Deeply Oxidizing NOx

Learning from the important role of porphyrin-based chromophores in natural photosynthesis, a bionic photocatalytic system based on tetrakis (4-carboxyphenyl) porphyrin-coupled TiO₂ was designed for photo-induced treating low-concentration NO_x indoor gas (550 parts per billion), achieving a high NO removal rate of 91% and a long stability under visible-light (λ ≥ 420 nm) irradiation. Besides the great contribution of the conventional ^•O₂^- reactive species, a synergic effect between a singlet oxygen (¹O₂) and mobile hydroxyl radicals (^•OH_f) was first illustrated for removing NO_x indoor gas (¹O₂ + 2NO → 2NO₂, NO₂ + ^•OH_f → HNO₃), inhibiting the production of the byproducts of NO₂. This work is helpful for understanding the surface mechanism of photocatalytic NO_x oxidation and provides a new perspective for the development of highly efficient air purification systems.

A novel BiOX photocatalyst for the "green" degradation of polymers used in oilfields

The wastes from functional polymers (polyanionic cellulose, polyacrylamide, potassium polyacrylamide, and hydroxyethyl cellulose) generated during oil and gas exploration and development are harmful to biodiversity and human health. However, most traditional treatments are inefficient in degradation and cause secondary pollution. In this paper, BiOBr_0.5Cl_0.5 a 3D flower-like solid solution with in-situ deposition of elementary substance Bi and surface oxygen vacancies was synthesized by the hydrolysis and the redox methods. The chemical compositions, the morphologies, and the UV-visible absorption properties of Bi/BiOBr_0.5Cl_0.5 were characterized. Moreover, the photocatalytic activity of Bi/BiOBr_0.5Cl_0.5 and the kinetic behavior of the RhB photocatalytic degradation were investigated. The photocatalytic degradation of RhB followed a pseudo-first-order kinetic reaction, and Bi/BiOBr_0.5Cl_0.5-0.3 demonstrated the highest photocatalytic activity: The RhB degradation efficiency of Bi/BiOBr_0.5Cl_0.5-0.3 was 85%, and the COD removal rate of the functional polymers conducted by Bi/BiOBr_0.5Cl_0.5-0.3 was greater than 80%. The exciton photocatalytic processes of Bi/BiOBr_0.5Cl_0.5 was found through the electron spin resonance (ESR) and the active-species trapping analyses of the photocatalytic degradations of RhB by Bi/BiOBr_0.5Cl_0.5. In summary, in this paper, the synthesis methods of Bi/BiOBr_0.5Cl_0.5 photocatalyst and the photocatalytic activity of the Bi/BiOBr_0.5Cl_0.5 on the degradations of polymers used in oilfields were reported, addressing the shortcomings of the existing treatments for polymer waste fluids that are incorporated into the oil and gas exploration and development process.

Fabrication of 1D/2D BiPO4/g-C3N4 heterostructured photocatalyst with enhanced photocatalytic efficiency for NO removal

The visible light photocatalytic removal of NO in air is a promising way. BiPO₄ is restricted by its wide band gap and can only be responded to ultraviolet light. Herein, 1D BiPO₄ nanorod/2D g-C₃N₄ heterostructured photocatalyst was successfully synthesized via a facile one-step hydrothermal process for efficient visible light photocatalytic removal of NO. With simulated sunlight irradiation, the photocatalytic NO removal activity of the BiPO₄/g-C₃N₄ (64%) is much higher than that of the pure BiPO₄ (7.2%) and g-C₃N₄ (50%). Its excellent photocatalytic performance was ascribed to broadening the light response range to visible light and boosting the separation and transfer of photogenerated electrons and holes. The NO photocatalytic removal mechanism was proposed by the free radical trapping experiment and in situ DRIFTS research. The present study might induce a new means to design BiPO₄-based heterostructured photocatalysts for the removal of NO from air pollution under simulated solar light irradiation.

Photocatalytic Air Purification Using Functional Polymeric Carbon Nitrides

The techniques for the production of the environment have received attention because of the increasing air pollution, which results in a negative impact on the living environment of mankind. Over the decades, burgeoning interest in polymeric carbon nitride (PCN) based photocatalysts for heterogeneous catalysis of air pollutants has been witnessed, which is improved by harvesting visible light, layered/defective structures, functional groups, suitable/adjustable band positions, and existing Lewis basic sites. PCN-based photocatalytic air purification can reduce the negative impacts of the emission of air pollutants and convert the undesirable and harmful materials into value-added or nontoxic, or low-toxic chemicals. However, based on previous reports, the systematic summary and analysis of PCN-based photocatalysts in the catalytic elimination of air pollutants have not been reported. The research progress of functional PCN-based composite materials as photocatalysts for the removal of air pollutants is reviewed here. The working mechanisms of each enhancement modification are elucidated and discussed on structures (nanostructure, molecular structue, and composite) regarding their effects on light-absorption/utilization, reactant adsorption, intermediate/product desorption, charge kinetics, and reactive oxygen species production. Perspectives related to further challenges and directions as well as design strategies of PCN-based photocatalysts in the heterogeneous catalysis of air pollutants are also provided.

Efficient and effective removal of emerging contaminants through the parallel coupling of rapid adsorption and photocatalytic degradation: A case study of fluoroquinolones

The development of efficient, effective, and large-scale treatment methods to address high-risk emerging contaminants (ECs) is a growing challenge in environmental remediation. Herein, a novel parallel coupling strategy of adsorption separation and photodegradation regeneration (parallel ASPR) is proposed; subsequently, an adsorptive photocatalyst (Zn-doped BiOI) is designed to demonstrate how to effectively eliminate fluoroquinolones (FQs) from water with the proposed ASPR scheme. Compared with pure BiOI, the addition of Zn²⁺ during synthesis has a significant influence on the morphology and structure of the products, resulting in Zn-doped BiOI samples with up to 5 times the specific surface area, 32 times the adsorption capacity, and 20 times the photocurrent intensity. The optimized Zn-doped BiOI sample has an excellent adsorption efficiency for FQs with a removal rate that exceeds 95% after 5 min of adsorption for all 6 tested FQ antibiotics. Then the adsorbed contaminants can be effectively degraded during the later visible-light irradiation process, and the adsorbent can be regenerated synchronously, showing excellent ASPR cycling performances. The mechanisms of rapid adsorption and photocatalysis were explored via material characterizations, adsorption models, density functional theory calculations, and photogenerated species analyses. The results reveal that the enhanced adsorption of Zn-doped BiOI for FQs is due to its high specific surface area, coordination-based chemical adsorption, and surface electrostatic attraction, while its superior visible-light photodegradation performance is mainly ascribed to its strong redox ability, abundant surface oxygen vacancies, and enhanced photogenerated carrier separation efficiency.

Integrated photocatalysis-adsorption-membrane separation in rotating reactor for synergistic removal of RhB

A synergistic system of integrated photocatalysis-adsorption-membrane separation in a rotating reactor was designed. The composite membrane was prepared via filtration process under vacuum, and it was composed of graphene oxide (GO) acted as the separation membrane, activated carbon (AC) as the adsorbent and Ag@BiOBr as the photocatalyst, respectively. In this Ag@BiOBr/AC/GO membrane system, rotation of the membrane could avoid the light-shielding effect from organic color pollutants to achieve the complete removal of pollutants. More importantly, the synergistic effect among photocatalysis, adsorption and membrane separation in rotating reactor was significant for the efficient removal of rhodamine B (RhB). In the Ag@BiOBr/AC/GO composite membrane, GO membrane layer could reject the organic molecular by the assistance of AC layer with efficient adsorption capacity, and Ag@BiOBr at outer layer could photodegrade the organics under visible light irradiation. The photocatalysis process could solve the problem of membrane fouling and adsorption could assist GO membrane for stopping the permeation of pollutants. Meanwhile, GO membrane was not only beneficial for catalyst recovery, but also could concentrate the pollutants via the membrane separation to accelerate the photocatalytic degradation. At the same time, both the photocatalysis degradation and membrane separation could promote the adsorption ability of AC. This synergistic system showed the significant potential for the practical application in the future.

Hydrogen Generation over RuO2 Nanoparticle-Decorated LaNaTaO3 Perovskite Photocatalysts under UV Exposure

The efficacy of LaNaTaO₃ perovskites decoration RuO₂ at diverse contents for the photocatalytic H₂ generation has been explored in this study. The photocatalytic performance of RuO₂ co-catalyst onto mesoporous LaNaTaO₃ was evaluated for H₂ under UV illumination. 3%RuO₂/LaNaTaO₃ perovskite photocatalyst revealed the highest photocatalytic H₂ generation performance, indicating that RuO₂ nanoparticles could promote the photocatalytic efficiency of LaNaTaO₃ perovskite significantly. The H₂ evolution rate of 3%RuO₂/LaNaTaO₃ perovskite is 11.6 and 1.3 times greater than that of bare LaNaTaO₃ perovskite employing either 10% CH₃OH or pure H₂O, respectively. Interestingly, the photonic efficiency of 3%RuO₂/LaNaTaO₃ perovskite was enhanced 10 times than LaNaTaO₃ perovskite in the presence of aqueous CH₃OH solutions as a hole sacrificial agent. The high separation of charge carriers is interpreted by the efficient hole capture using CH₃OH, hence leading to greater H₂ generation over RuO₂/LaNaTaO₃ perovskites. This is attributed to an adjustment position between recombination electron-hole pairs and also the reduction of potential conduction alignment as a result of RuO₂ incorporation. The suggested mechanisms of RuO₂/LaNaTaO₃ perovskites for H₂ generation employing either CH₃OH or pure H₂O were discussed. The photocatalytic performances of the perovskite photocatalyst were elucidated according to the PL intensity and the photocurrent response investigations.

Surface structure-dependent photocatalytic O2 activation for pollutant removal with bismuth oxyhalides

The purification of water and air by semiconductor photocatalysis is a rapidly growing area for academic research and industrial innovation, featured with ambient removal of organic or inorganic pollutants by using solar light as the energy source and atmospheric O₂ as the green oxidant. Both charge transfer and energy transfer from excited photocatalysts can overcome the spin-forbidden nature of O₂. Layered bismuth oxyhalides are a new group of two-dimensional photocatalysts with an appealing geometric and surface structure that allows the dynamic and selective tuning of O₂ activation at the surface molecular level. In this Feature Article, we specifically summarize our recent progress in selective O₂ activation by engineering surface structures of bismuth oxyhalides. Then, we demonstrate selective photocatalytic O₂ activation of bismuth oxyhalides for environmental control, including water decontamination, volatile organic compound oxidation and nitrogen oxide removal, as well as selective catalytic oxidations. Challenges and opportunities regarding the design of photocatalysts with satisfactory performance for potential environmental control applications are also presented.

La-doping induced localized excess electrons on (BiO)2CO3 for efficient photocatalytic NO removal and toxic intermediates suppression

Photocatalysis technology has been extensively adopted to abate typical air pollutants. Nevertheless, it is a challenge to develop photocatalysts aiming to simultaneously improve photocatalytic selectivity and efficiency. In this study, to improve the photocatalytic selectivity and the performance of (BiO)₂CO₃ in the oxidation of NO to target products (NO₂^- /NO₃^-), we developed a novel method to construct La-doped (BiO)₂CO₃ (La-BOC) for forming localized excess electrons (Ex) on (BiO)₂CO₃ surface. The results indicate that the Ex could effectively accelerate the activation of reactants and promote charge separation and transfer. Under visible light, the gas molecules could capture the Ex and get activated to produce reactive oxygen species (ROS) with high oxidation ability, which enables complete oxidation of NO to target products instead of producing other toxic by-products. Due to the functionality of the Ex, the photocatalytic selectivity and efficiency of La-BOC have been synchronously improved. Combining experimental and theoretical methods, this work unravels the pathway of charge carriers transportation/transformation and elucidates the photocatalytic NO oxidation mechanism. The present work could provide a novel method to improve photocatalytic selectivity and activity for safe air pollutant abatement.

Bi and oxygen defects improved visible light photocatalysis with BiOBr nanosheets

Bi metal attached BiOBr with oxygen defect (BiOBr(3)-Bi(x%, x = 10, 20, 30)) nanosheets was prepared via the hydrothermal process in this study. The different characterization techniques of x-ray diffraction, x-ray photoelectron spectrometer, electron spin resonance (ESR), field emission scanning electron microscope, and high resolution transmission electron microscope were used to distinguish the composition, crystal structure, and morphology of the samples. Under visible light irradiation, the BiOBr(3)-Bi(x%, x = 10, 20, 30) samples exhibited improved photocatalytic activity for the degradation of colored dyes (RhB) and colorless tetracycline hydrochloride. Such an improvement was ascribed to the widened visible light absorption and enhanced separation of the photogenerated electron-hole pairs because of the synergistic effect of oxygen vacancies and Bi metal with plasmon resonance effects. A possible photocatalytic mechanism of the quasi Z-scheme process was proposed on the basis of ESR measurements and radical-trapping experiments.

Photocatalytic BiOX Mortars under Visible Light Irradiation: Compatibility, NOx Efficiency and Nitrate Selectivity

The use of new photocatalysts active under visible light in cement-based building materials represents one interesting alternative to improve the air quality in the urban areas. This work undertakes the feasibility of using BiOX (X = Cl and I) as an addition on mortars for visible-light-driven NOx removal. The interaction between BiOX photocatalysts and cement matrix, and the influence of their addition on the inherent properties of the cement-based materials was studied. The NO removal by the samples ranking as follows BiOCl-cem > BiOI-cem > TiO2-cem. The higher efficiency under visible light of BiOCl-cem might be ascribed to the presence of oxygen vacancies together with a strong oxidation potential. BiOI-cem suffers a phase transformation of BiOI in alkaline media to an I-deficient bismuth oxide compound with poor visible light absorbance capability. However, BiOI-cem showed considerably higher nitrate selectivity that resulted in the highest NOx global removal efficiency. These results can make its use more environmentally sustainable than TiO2 and BiOCl cement composites.

UV-light-assisted green preparation of Bi/BiOBr/RGO composites with oxygen vacancies toward enhanced photocatalytic removal of organic dye

Concomitant formation of metallic Bi nanoparticles and oxygen vacancies was successfully achieved within Bi/BiOBr/RGO composites by green UV-light exposure.

Iodine ion doped bromo bismuth oxide modified bismuth germanate: A direct Z-scheme photocatalyst with enhanced visible-light photocatalytic performance

A series of Z-scheme I-BiOBr/Bi₁₂GeO₂₀ heterostructures were successfully obtained by a simple method. The Z-scheme I-BiOBr/Bi₁₂GeO₂₀ heterostructures show outstanding photocatalytic performance for degrading the various organic pollutants of the waste water. For degradation of Tetracycline (TC), the Z-scheme 30I-BiOBr/Bi₁₂GeO₂₀ heterostructure exhibits the superior rate constant, which is about 7.73 times, 3.52 times and 1.66 times higher than that of the pure Bi₁₂GeO₂₀, BiOBr and I-BiOBr, respectively. Meanwhile, as we expected, the Z-scheme 30I-BiOBr/Bi₁₂GeO₂₀ heterostructure also displays the enhanced photocatalytic perfomance for degradation of Ciprofloxacin (CIP), 2-Mercaptobenzothiazole (MBT) and reduction of aqueous Cr(VI). The enhancement of photocatalytic performance is attributed to the high redox capacity and the strong interfacial interaction between I-BiOBr and Bi₁₂GeO₂₀, which can effectively improve the separation of photo-induced electron-hole pairs. Additionally, the photocatalytic mechanism over the Z-scheme I-BiOBr/Bi₁₂GeO₂₀ heterostructure is provided. The research work may provide a promising approach to fabricate other Z-scheme heterostructures with efficient photocatalytic performance.

Recent Advances and Applications of Semiconductor Photocatalytic Technology

Along with the development of industry and the improvement of people’s living standards, peoples’ demand on resources has greatly increased, causing energy crises and environmental pollution. In recent years, photocatalytic technology has shown great potential as a low-cost, environmentally-friendly, and sustainable technology, and it has become a hot research topic. However, current photocatalytic technology cannot meet industrial requirements. The biggest challenge in the industrialization of photocatalyst technology is the development of an ideal photocatalyst, which should possess four features, including a high photocatalytic efficiency, a large specific surface area, a full utilization of sunlight, and recyclability. In this review, starting from the photocatalytic reaction mechanism and the preparation of the photocatalyst, we review the classification of current photocatalysts and the methods for improving photocatalytic performance; we also further discuss the potential industrial usage of photocatalytic technology. This review also aims to provide basic and comprehensive information on the industrialization of photocatalysis technology.

The activation of oxygen through oxygen vacancies in BiOCl/PPy to inhibit toxic intermediates and enhance the activity of photocatalytic nitric oxide removal

Photocatalysis is regarded as a promising technology for indoor air purification. Despite much effort, the inhibition of toxic intermediates and the promotion of nitric oxide (NO) oxidation activity still limit real applications due to catalyst design constraints. In order to circumvent this issue, oxygen vacancies were fabricated through a strong interaction between BiOCl and polypyrrole (PPy) based on computational predictions. Oxygen vacancies worked as sites to activate O2 molecules, and the relative barrier energies of NO oxidation were significantly reduced due to the O2 activation process. With the oxygen vacancy modification, the oxidizability of BiOCl was improved, and the generation of the superoxide radical (˙O2-) was promoted on BiOCl/PPy, while the hydroxyl radical (˙OH) remained unchanged under visible light irradiation. As a result, the efficiency of NO oxidation increased from 12% to 28%, while the NO2 production was inhibited completely. Finally, in situ diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS) investigations were conducted to shed light on the mechanism of the NO oxidation process. This work provides an in-depth understanding of the interaction between oxygen vacancies and O2 during the NO oxidation process, which offers a scheme to control the oxidation reaction.

Roles of N-Vacancies over Porous g-C3N4 Microtubes during Photocatalytic NO x Removal

The development of catalysts that effectively activate target pollutants and promote their complete conversion is an admirable objective in the environmental photocatalysis field. In this work, graphitic carbon nitride (g-C₃N₄) microtubes with tunable N-vacancy concentrations were controllably fabricated using an in situ soft-chemical method. The morphological evolution of g-C₃N₄, from the bulk to the porous tubular architecture, is discussed in detail with the aid of time-resolved hydrothermal experiments. We found that the NO removal ratio and apparent reaction rate constant of the g-C₃N₄ microtubes were 1.8 and 2.6 times higher than those of pristine g-C₃N₄, respectively. By combining detailed experimental characterization and density functional theory calculations, the effects of N-vacancies in the g-C₃N₄ microtubes on O₂ and NO adsorption activation, electron capture, and electronic structure were systematically investigated. These results demonstrate that surface N-vacancies act as specific sites for the adsorption activation of reactants and photoinduced electron capture, while enhancing the light-absorbing capability of g-C₃N₄. Moreover, the porous wall structures of the as-prepared g-C₃N₄ microtubes facilitate the diffusion of reactants, and their tubular architectures favor the oriented transfer of charge carriers. The intermediates formed during photocatalytic NO removal processes were identified by in situ diffuse reflectance infrared Fourier transform spectroscopy, and different reaction pathways over pristine and N-deficient g-C₃N₄ are proposed. This study provides a feasible strategy for air pollution control over g-C₃N₄ by introducing N-vacancy and porous tubular architecture simultaneously.