Catalytic Properties of Cobalt(III)−Oxo Cubanes in the TBHP Oxidation of Benzylic Alcohols

Tailoring the electron density of cobalt oxide clusters to provide highly selective superoxide and peroxide species for aerobic cyclohexane oxidation

The catalytic aerobic cyclohexane oxidation to cyclohexanol and cyclohexanone (KA oil) is an industrially relevant reaction. This work is focused on the synthesis of tailor-made catalysts based on the well-known Co₄O₄ core in order to successfully deal with cyclohexane oxidation reaction. The catalytic activity and selectivity of the synthesized catalysts can be correlated with the electronic density of the cluster, modulated by changing the organic ligands. This is not trivial in cyclohexane oxidation. Furthermore, the reaction mechanism is discussed on the basis of kinetics and spin trapping experiments, confirming that the electronic density of the catalyst has a clear influence on the distribution of the reaction products. In addition, in situ Raman spectroscopy was used to characterize the oxygen species formed on the cobalt cluster during the oxidation reaction. Altogether, it can be concluded that the catalyst with the highest oxidation potential promotes the formation of peroxide and superoxide species, which is the best way to oxidize inactivated CH bonds in alkanes. Finally, based on the results of the mechanistic studies, the contribution of these cobalt oxide clusters in each single reaction step of the whole process has been proposed.

Characterization and chemical reactivity of room-temperature-stable MnIII-alkylperoxo complexes

While alkylperoxomanganese(iii) (MnIII-OOR) intermediates are proposed in the catalytic cycles of several manganese-dependent enzymes, their characterization has proven to be a challenge due to their inherent thermal instability. Fundamental understanding of the structural and electronic properties of these important intermediates is limited to a series of complexes with thiolate-containing N4S- ligands. These well-characterized complexes are metastable yet unreactive in the direct oxidation of organic substrates. Because the stability and reactivity of MnIII-OOR complexes are likely to be highly dependent on their local coordination environment, we have generated two new MnIII-OOR complexes using a new amide-containing N5 - ligand. Using the 2-(bis((6-methylpyridin-2-yl)methyl)amino)-N-(quinolin-8-yl)acetamide (H6Medpaq) ligand, we generated the [MnIII(OO t Bu)(6Medpaq)]OTf and [MnIII(OOCm)(6Medpaq)]OTf complexes through reaction of their MnII or MnIII precursors with t BuOOH and CmOOH, respectively. Both of the new MnIII-OOR complexes are stable at room-temperature (t 1/2 = 5 and 8 days, respectively, at 298 K in CH3CN) and capable of reacting directly with phosphine substrates. The stability of these MnIII-OOR adducts render them amenable for detailed characterization, including by X-ray crystallography for [MnIII(OOCm)(6Medpaq)]OTf. Thermal decomposition studies support a decay pathway of the MnIII-OOR complexes by O-O bond homolysis. In contrast, direct reaction of [MnIII(OOCm)(6Medpaq)]+ with PPh3 provided evidence of heterolytic cleavage of the O-O bond. These studies reveal that both the stability and chemical reactivity of MnIII-OOR complexes can be tuned by the local coordination sphere.

Polynuclear Cobalt Complexes as Catalysts for Light-Driven Water Oxidation: A Review of Recent Advances

Photochemical water oxidation, as a half-reaction of water splitting, represents a great challenge towards the construction of artificial photosynthetic systems. Complexes of first-row transition metals have attracted great attention in the last decade due to their pronounced catalytic efficiency in water oxidation, comparable to that exhibited by classical platinum-group metal complexes. Cobalt, being an abundant and relatively cheap metal, has rich coordination chemistry allowing construction of a wide range of polynuclear architectures for the catalytic purposes. This review covers recent advances in application of cobalt complexes as (pre)catalysts for water oxidation in the model catalytic system comprising [Ru(bpy)3]2+ as a photosensitizer and S2O82− as a sacrificial electron acceptor. The catalytic parameters are summarized and discussed in view of the structures of the catalysts. Special attention is paid to the degradation of molecular catalysts under catalytic conditions and the experimental methods and techniques used to control their degradation as well as the leaching of cobalt ions.

Bioinspired cobalt cubanes with tunable redox potentials for photocatalytic water oxidation and CO2 reduction

The development of efficient, robust and earth-abundant catalysts for photocatalytic conversions has been the Achilles’ heel of solar energy utilization. Here, we report on a chemical approach based on ligand designed architectures to fabricate unique structural molecular catalysts coupled with appropriate light harvesters (e.g., carbon nitride and Ru(bpy)₃²⁺) for photoredox reactions. The “Co₄O₄” cubane complex Co₄O₄(CO₂Me)₄(RNC₅H₄)₄ (R = CN, Br, H, Me, OMe), serves as a molecular catalyst for the efficient and stable photocatalytic water oxidation and CO₂ reduction. A comprehensive structure–function analysis emerged herein, highlights the regulation of electronic characteristics for a molecular catalyst by selective ligand modification. This work demonstrates a modulation method for fabricating effective, stable and earth-abundant molecular catalysts, which might facilitate further innovation in the function-led design and synthesis of cubane clusters for photoredox reactions.

Copper based coordination polymers based on metalloligands: utilization as heterogeneous oxidation catalysts

This work presents two copper-based coordination polymers and their utilization as stable, reusable and heterogeneous catalysts for the epoxidation of olefins using O₂ and for peroxide-mediated oxidation of benzyl alcohols under solvent-free conditions.

Electron Paramagnetic Resonance Characterization of Dioxygen-Bridged Cobalt Dimers with Relevance to Water Oxidation

A variety of metal oxides can catalyze the oxidation of water to molecular oxygen when polarized by a sufficiently high electrochemical potential. Minimizing the overpotential and increasing the rate of the oxygen-evolving reaction (OER) are key goals in making such materials a component of viable energy storage devices. However, the structural factors that imbue the metal oxides with their catalytic power are difficult to assess as these solids contain many distinct metal-ion sites, have a varying amount of defect sites within the lattice, and can be composed of multiple phases. In the present study, we determined the magnetic properties for a series of dimeric cobalt complexes in which the two metal centers are bridged by a dioxygen moiety. Our spectroscopically validated electronic structure description indicates that each species is best described as two Co(III) ions that are bound to a μ-η¹η¹ superoxide ligand. Intriguingly, we found evidence that the two compounds that possess oxygen-evolving activity coordinate the superoxide ion in an unusual, nonplanar fashion. It appears as if the intermediately long Co···Co distance of 3.9 Å is responsible for the unusual superoxide binding geometry. This structural factor may be an important element in the design of solid-state OER catalysts.

X-ray Spectroscopic Characterization of Co(IV) and Metal-Metal Interactions in Co4O4: Electronic Structure Contributions to the Formation of High-Valent States Relevant to the Oxygen Evolution Reaction

The formation of high-valent states is a key factor in making highly active transition-metal-based catalysts of the oxygen evolution reaction (OER). These high oxidation states will be strongly influenced by the local geometric and electronic structures of the metal ion, which are difficult to study due to spectroscopically active and complex backgrounds, short lifetimes, and limited concentrations. Here, we use a wide range of complementary X-ray spectroscopies coupled to DFT calculations to study Co(III)4O4 cubanes and their first oxidized derivatives, which provide insight into the high-valent Co(IV) centers responsible for the activity of molecular and heterogeneous OER catalysts. The combination of X-ray absorption and 1s3p resonant inelastic X-ray scattering (Kβ RIXS) allows Co(IV) to be isolated and studied against a spectroscopically active Co(III) background. Co K- and L-edge X-ray absorption data allow for a detailed characterization of the 3d-manifold of effectively localized Co(IV) centers and provide a direct handle on the t2g-based redox-active molecular orbital. Kβ RIXS is also shown to provide a powerful probe of Co(IV), and specific spectral features are sensitive to the degree of oxo-mediated metal-metal coupling across Co4O4. Guided by the data, calculations show that electron-hole delocalization can actually oppose Co(IV) formation. Computational extension of Co4O4 to CoM3O4 structures (M = redox-inactive metal) defines electronic structure contributions to Co(IV) formation. Redox activity is shown to be linearly related to covalency, and M(III) oxo inductive effects on Co(IV) oxo bonding can tune the covalency of high-valent sites over a large range and thereby tune E(0) over hundreds of millivolts. Additionally, redox-inactive metal substitution can also switch the ground state and modify metal-metal and antibonding interactions across the cluster.

A discrete {Co4(μ3-OH)4}(4+) cluster with an oxygen-rich coordination environment as a catalyst for the epoxidation of various olefins

Using the sterically hindered terphenyl-based carboxylate, the tetrameric Co(ii) complex [Co4(μ3-OH)4(μ-O2CAr(4F-Ph))2(μ-OTf)2(Py)4] () with an asymmetric cubane-type core has been synthesized and fully characterized by X-ray diffraction, UV-vis spectroscopy, and electron paramagnetic resonance spectroscopy. Interestingly, the cubane-type cobalt cluster with 3-chloroperoxybenzoic acid as the oxidant was found to be very effective in the epoxidation of a variety of olefins, including terminal olefins which are more challenging targeting substrates. Moreover, this catalytic system showed a fast reaction rate and high epoxide yields under mild conditions. Based on product analysis and Hammett studies, the use of peroxyphenylacetic acid as a mechanistic probe, H2(18)O-exchange experiments, and EPR studies, it has been proposed that multiple reactive cobalt-oxo species Co(V)[double bond, length as m-dash]O and Co(IV)[double bond, length as m-dash]O were involved in the olefin epoxidation.

Iron(iii) and cobalt(iii) complexes with both tautomeric (keto and enol) forms of aroylhydrazone ligands: catalysts for the microwave assisted oxidation of alcohols

Aroylhydrazone Fe(iii) and Co(iii) complexes of both keto and enol tautomeric forms of the ligand are reported and shown to catalyze the microwave-assisted solvent-free peroxidative oxidation (by TBHP) of primary and secondary alcohols.

Artificial photosynthesis: a molecular approach to photo-induced water oxidation

By the use of a molecular approach we performed photo-induced water oxidation by combining different photosensitizers and catalysts in order to obtain an efficient system that pave the way to the construction of an artificial photosynthetic system. Different types of molecular catalysts, such as ruthenium and vanadium polyoxometalates or cobalt core stabilized by different organic ligands were combined with ruthenium (II) polypyridine complexes of different nuclearity, mononuclear species like [Ru(bpy)3]2+ or a tetranuclear dendrimer.

Catalytic Oxygen Evolution by Cobalt Oxido Thin Films

The contemporary demand to generate fuels from solar energy has stimulated intense effort to develop water splitting catalysts that can be coupled to light-absorbing materials. Cobalt oxido catalyst (Co-OECs) films deposited from buffered Co(II) solutions have emerged as arguably the most studied class of heterogeneous oxygen evolution catalysts. The interest in these materials stems from their formation by self-assembly, their self-healing properties, and their promising catalytic activity under a variety of conditions. The structure and function of these catalysts are reviewed here together with studies of molecular Co-O cluster compounds, which have proven invaluable in elucidating the chemistry of the Co-OECs.

Copper-organic frameworks assembled from in situ generated 5-(4-pyridyl)tetrazole building blocks: synthesis, structural features, topological analysis and catalytic oxidation of alcohols

Two new metal-organic compounds {[Cu3(μ3-4-ptz)4(μ2-N3)2(DMF)2](DMF)2}n (1) and {[Cu(4-ptz)2(H2O)2]}n (2) {4-ptz = 5-(4-pyridyl)tetrazolate} with 3D and 2D coordination networks, respectively, have been synthesized while studying the effect of reaction conditions on the coordination modes of 4-pytz by employing the [2 + 3] cycloaddition as a tool for generating in situ the 5-substituted tetrazole ligands from 4-pyridinecarbonitrile and NaN3 in the presence of a copper(ii) salt. The obtained compounds have been structurally characterized and the topological analysis of 1 discloses a topologically unique trinodal 3,5,6-connected 3D network which, upon further simplification, results in a uninodal 8-connected underlying net with the bcu (body centred cubic) topology driven by the [Cu3(μ2-N3)2] cluster nodes and μ3-4-ptz linkers. In contrast, the 2D metal-organic network in 2 has been classified as a uninodal 4-connected underlying net with the sql [Shubnikov tetragonal plane net] topology assembled from the Cu nodes and μ2-4-ptz linkers. The catalytic investigations disclosed that 1 and 2 act as active catalyst precursors towards the microwave-assisted homogeneous oxidation of secondary alcohols (1-phenylethanol, cyclohexanol, 2-hexanol, 3-hexanol, 2-octanol and 3-octanol) with tert-butylhydroperoxide, leading to the yields of the corresponding ketones up to 86% (TOF = 430 h(-1)) and 58% (TOF = 290 h(-1)) in the oxidation of 1-phenylethanol and cyclohexanol, respectively, after 1 h under low power (10 W) microwave irradiation, and in the absence of any added solvent or additive.

A functionalized, ethynyl-decorated, tetracobalt(iii) cubane molecular catalyst for photoinduced water oxidation

A new tetracobalt(iii)-oxo cubane 1 was prepared. The ethynyl groups do not affect the photocatalytic properties of 1, which, in contrast, appear to be improved.

Efficient C-H Bond Activations via O2 Cleavage by a Dianionic Cobalt(II) Complex

A dianionic, square planar cobalt(II) complex reacts with O₂ in the presence of acetonitrile to give a cyanomethylcobalt(III) complex formed by C-H bond cleavage. Interestingly, PhIO and p-tolylazide react similarly to give the same cyanomethylcobalt(III) complex. Competition studies with various hydrocarbon substrates indicate that the rate of C-H bond cleavage greatly depends on the p Ka of the C-H bond, rather than on the C-H bond dissociation energy. Kinetic isotope experiments reveal a moderate KIE value of ca. 3.5 using either O₂ or PhIO. The possible involvement of a cobalt(IV) oxo species in this chemistry is discussed.

Syntheses, Structures and Photoluminescence of a Series of Transition Metal-Cyanopyridine Polymers

A series of transition metal- n cyanopyridines ( i.e. pyridine- n-carbonitrile; n = 2, 3, 4) complexes with one-dimensional (1-D) structures, [CuCl2(pyridine-3-carbonitrile)2] n, [CuCl2(pyridine-4-carbonitrile)2] n and [CoCl2(pyridine-4-carbonitrile)2] n, have been synthesised via hydrothermal reactions and structurally characterised by single-crystal X-ray diffraction. All these complexes feature infinite 1-D chain-like structures. Photoluminescent investigation reveals that the title complexes display strong emissions which may originate from π→π* charge-transfer interaction of the ligands.