Sustained Water Oxidation by [Mn4O4]7+ Core Complexes Inspired by Oxygenic Photosynthesis

Research on engineered electrocatalysts for efficient water splitting: a comprehensive review

Water electrolysis plays an interesting role toward hydrogen generation for overcoming global environmental crisis and solving the energy storage problem. However, there is still a deficiency of efficient electrocatalysts to overcome sluggish kinetics for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Great efforts have been employed to produce potential catalysts with low overpotential, rapid kinetics, and excellent stability for HER and OER. At present, hydrogen economy is driven by electrocatalysts with excellent characteristics; thus, systematic design strategy has become the driving force to exploit earth-abundant transition metal-based electrocatalysts toward H₂ economy. In this review, the recent progress on newer materials including metals, alloys, and transition metal oxides (manganese oxides, cobalt oxides, nickel oxides, PBA-derived metal oxides, and metal complexes) as photocatalysts/electrocatalysts has been overviewed together with some methodologies for efficient water splitting. Metal-organic framework (MOF)-based electrocatalysts have been highly exploited owing to their interesting functionalities. The photovoltaic-electrocatalytic (PV-EC) process focused on harvesting high solar-to-hydrogen efficiency (STH) among various solar energy conversion as well as storage systems. Electrocatalysts/photocatalysts with high efficiency have become an urgent need for overall water splitting. Also, cutting-edge achievements in the fabrication of electrocatalysts along with theoretical consideration have been discussed.

Energy Landscape for the Electrocatalytic Oxidation of Water by a Single-Site Oxomanganese(V) Porphyrin

A cationic manganese porphyrin, Mn^III-TDMImP, is an efficient, homogeneous, single-site water oxidation electrocatalyst at neutral pH. The measured turnover frequency for oxygen production is 32 s^-1. Mechanistic analyses indicate that Mn^V(O)(OH₂), the protonated form of the corresponding trans-Mn^V(O)₂ species, is generated from the Mn^III(OH₂)₂ precursor in a 2-e^- two-proton process and is responsible for O-O bond formation with a H₂O molecule. Chloride ion is a competitive substrate with H₂O for the Mn^V(O)(OH₂) oxidant, forming hypochlorous acid with a rate constant that is 3 orders of magnitude larger than that of water oxidation. The data allow the construction of an experimental energy landscape for this water oxidation catalysis process.

Design of molecular water oxidation catalysts with earth-abundant metal ions

The four-electron oxidation of water (2H2O → O2 + 4H+ + 4e-) is considered the main bottleneck in artificial photosynthesis. In nature, this reaction is catalysed by a Mn4CaO5 cluster embedded in the oxygen-evolving complex of photosystem II. Ruthenium-based complexes have been successful artificial molecular catalysts for mimicking this reaction. However, for practical and large-scale applications in the future, molecular catalysts that contain earth-abundant first-row transition metal ions are preferred owing to their high natural abundance, low risk of depletion, and low costs. In this review, the frontier of water oxidation reactions mediated by first-row transition metal complexes is described. Special attention is paid towards the design of molecular structures of the catalysts and their reaction mechanisms, and these factors are expected to serve as guiding principles for creating efficient and robust molecular catalysts for water oxidation using ubiquitous elements.

Recent Advances in the Development of Molecular Catalyst-Based Anodes for Water Oxidation toward Artificial Photosynthesis

Catalytic water oxidation represents a bottleneck for developing artificial photosynthetic systems that store solar energy as renewable fuels. A variety of molecular water oxidation catalysts (WOCs) have been reported over the last two decades. In view of their applications in artificial photosynthesis devices, it is essential to immobilize molecular catalysts onto the surfaces of conducting/semiconducting supports for fabricating efficient and stable water oxidation anodes/photoanodes. Molecular WOC-based anodes are essential for developing photovoltaic artificial photosynthesis devices and, moreover, the performance of molecular WOC on anodes will provide important insight into designing extended molecular WOC-based photoanodes for photoelectrochemical (PEC) water oxidation. This Review concerns recent progress in the development of molecular WOC-based anodes over the last two decades and looks at the prospects for using such anodes in artificial photosynthesis.

Iron phosphate modified calcium iron oxide as an efficient and robust catalyst in electrocatalyzing oxygen evolution from seawater

CaFeO_x modified with electrodeposited FePO₄ exhibits high activity and stability in natural seawater splitting.

Tetranuclear Manganese Models of the OEC Displaying Hydrogen Bonding Interactions: Application to Electrocatalytic Water Oxidation to Hydrogen Peroxide

Toward the development of structural and functional models of the oxygen evolving complex (OEC) of photosystem II, we report the synthesis of site-differentiated tetranuclear manganese complexes featuring three six-coordinate and one five-coordinate Mn centers. To incorporate biologically relevant second coordination sphere interactions, substituents capable of hydrogen bonding are included as pyrazolates with arylamine substituents. Complexes with terminal anionic ligands, OH^- or Cl^-, bound to the lower coordinate metal center are supported through the hydrogen-bonding network in a fashion reminiscent of the enzymatic active site. The hydroxide complex was found to be a competent electrocatalyst for O-O bond formation, a key transformation pertinent to the OEC. In an acetonitrile-water mixture, at neutral pH, electrochemical water oxidation to hydrogen peroxide was observed, albeit with low (15%) Faradaic yield, likely due to competing reactions with organics. In agreement, 9,10-dihydroanthracene is electrochemically oxidized in the presence of this cluster both via H-atom abstraction and oxygenation with ∼50% combined Faradaic yield.

Frontiers of water oxidation: the quest for true catalysts

Development of advanced analytical techniques is essential for the identification of water oxidation catalysts together with mechanistic studies.

Water oxidation using earth-abundant transition metal catalysts: opportunities and challenges

Catalysts for the oxidation of water are a vital component of solar energy to fuel conversion technologies. This Perspective summarizes recent advances in the field of designing homogeneous water oxidation catalysts (WOCs) based on Mn, Fe, Co and Cu.

Cooperative effects in homogenous water oxidation catalysis by mononuclear ruthenium complexes

The homogenous water oxidation catalysis by [Ru(terpy)(bipy)Cl](+) (1) and [Ru(terpy)(Me2bipy)Cl](+) (2) (terpy = 2,2':6',2''-terpyridine, bipy = 2,2'-bipyridine, Me2bipy = 4,4'-dimethyl-2,2'-bipyridine) under the influence of two redox mediators [Ru(bipy)3](2+) (3) and [Ru(phen)2(Me2bipy)](2+) (4) (phen = 1,10-phenanthroline) was investigated using Ce(4+) as sacrificial oxidant. Oxygen evolution experiments revealed that mixtures of both 2-4 and 2-3 produced more molecular oxygen than catalyst 2 alone. In contrast, the combination of mediator 4 and catalyst 1 resulted in a lower catalytic performance of 1. Measurements of the temporal change in the intensity of a UV transition at 261 nm caused by the addition of four equivalents of Ce(4+) to 2 revealed three distinctive regions-suggested to correspond to the stepwise processes: (i) [Ru(IV)=O](2+) → [Ru(V)=O](3+); (ii) [Ru(V)=O](3+) → [Ru(III)-(OOH)](2+); and (iii) [Ru(III)-(OOH)](2+) → [Ru(II)-OH2](2+). UV-Visible spectrophotometric experiments on the 1-4 and 2-4 mixtures, also carried out with four equivalents of Ce(4+), demonstrated a faster [Ru(phen)2(Me2bipy)](3+) → [Ru(phen)2(Me2bipy)](2+) reduction rate in 2-4 than that observed for the 1-4 combination. Cyclic voltammetry data measured for the catalysts and the mixtures revealed a coincidence in the potentials of the Ru(II)/Ru(III) redox process of mediators 3 and 4 and the predicted [Ru(IV)=O](2+)/[Ru(V)=O](3+) potential of catalyst 2. In contrast, the [Ru(IV)=O](2+)/[Ru(V)=O](3+) process for catalyst 1 was found to occur at a higher potential than the Ru(II)/Ru(III) redox process for 4. Both the spectroscopic and electrochemical experiments provide evidence that the interplay between the mediator and the catalyst is an important determinant of the catalytic activity.

Enhancing catalytic activity by narrowing local energy gaps--X-ray studies of a manganese water oxidation catalyst

Changes in the local electronic structure of the Mn 3d orbitals of a Mn catalyst derived from a dinuclear Mn(III) complex during the water oxidation cycle were investigated ex situ by X-ray absorption spectroscopy (XAS) and resonant inelastic X-ray scattering (RIXS) analyses. Detailed information about the Mn 3d orbitals, especially the local HOMO-LUMO gap on Mn sites revealed by RIXS analyses, indicated that the enhancement in catalytic activity (water oxidation) originated from the narrowing of the local HOMO-LUMO gap when electrical voltage and visible light illumination were applied simultaneously to the Mn catalytic system.

The mechanism of water oxidation catalyzed by nanolayered manganese oxides: New insights

Herein we consider the mechanism of water oxidation by nanolayered manganese oxide in the presence of cerium(IV) ammonium nitrate. Based on membrane-inlet mass spectrometry results, the rate of H2((18))O exchange of μ-O groups on the surface of the nanolayered Mn-K oxide, and studies on water oxidation in the presence of different ratios of acetonitrile/water we propose a mechanism for water oxidation by nanolayered Mn oxides in the presence of cerium(IV) ammonium nitrate.

Earth-abundant metal complexes as catalysts for water oxidation; is it homogeneous or heterogeneous?

This minireview focuses on the aspects that determine whether particular catalysts for the oxidation of water are homogeneous or heterogeneous.

Mechanism for O-O bond formation in a biomimetic tetranuclear manganese cluster--A density functional theory study

Density functional theory calculations have been used to study the reaction mechanism of water oxidation catalyzed by a tetranuclear Mn-oxo cluster Mn4O4L6 (L=(C6H4)2PO4(-)). It is proposed that the O-O bond formation mechanism is different in the gas phase and in a water solution. In the gas phase, upon phosphate ligand dissociation triggered by light absorption, the O-O bond formation starting with both the Mn4(III,III,IV,IV) and Mn4(III,IV,IV,IV) oxidation states has to take place via direct coupling of two bridging oxo groups. The calculated barriers are 42.3 and 37.1 kcal/mol, respectively, and there is an endergonicity of more than 10 kcal/mol. Additional photons are needed to overcome these large barriers. In water solution, water binding to the two vacant sites of the Mn ions, again after phosphate dissociation triggered by light absorption, is thermodynamically and kinetically very favorable. The catalytic cycle is suggested to start from the Mn4(III,III,III,IV) oxidation state. The removal of three electrons and three protons leads to the formation of a Mn4(III,IV,IV,IV)-oxyl radical complex. The O-O bond formation then proceeds via a nucleophilic attack of water on the Mn(IV)-oxyl radical assisted by a Mn-bound hydroxide that abstracts a proton during the attack. This step was calculated to be rate-limiting with a total barrier of 29.2 kcal/mol. This is followed by proton-coupled electron transfer, O2 release, and water binding to start the next catalytic cycle.

Electrocatalytic oxygen evolution with an immobilized TAML activator

Iron complexes of tetra-amido macrocyclic ligands are important members of the suite of oxidation catalysts known as TAML activators. TAML activators are known to be fast homogeneous water oxidation (WO) catalysts, producing oxygen in the presence of chemical oxidants, e.g., ceric ammonium nitrate. These homogeneous systems exhibited low turnover numbers (TONs). Here we demonstrate immobilization on glassy carbon and carbon paper in an ink composed of the prototype TAML activator, carbon black, and Nafion and the subsequent use of this composition in heterogeneous electrocatalytic WO. The immobilized TAML system is shown to readily produce O2 with much higher TONs than the homogeneous predecessors.

Solar fuels generation and molecular systems: is it homogeneous or heterogeneous catalysis?

Catalysis is a key enabling technology for solar fuel generation. A number of catalytic systems, either molecular/homogeneous or solid/heterogeneous, have been developed during the last few decades for both the reductive and oxidative multi-electron reactions required for fuel production from water or CO(2) as renewable raw materials. While allowing for a fine tuning of the catalytic properties through ligand design, molecular approaches are frequently criticized because of the inherent fragility of the resulting catalysts, when exposed to extreme redox potentials. In a number of cases, it has been clearly established that the true catalytic species is heterogeneous in nature, arising from the transformation of the initial molecular species, which should rather be considered as a pre-catalyst. Whether such a situation is general or not is a matter of debate in the community. In this review, covering water oxidation and reduction catalysts, involving noble and non-noble metal ions, we limit our discussion to the cases in which this issue has been directly and properly addressed as well as those requiring more confirmation. The methodologies proposed for discriminating homogeneous and heterogeneous catalysis are inspired in part by those previously discussed by Finke in the case of homogeneous hydrogenation reaction in organometallic chemistry [J. A. Widegren and R. G. Finke, J. Mol. Catal. A, 2003, 198, 317-341].

Polyoxometalates immobilized in ordered mesoporous carbon nitride as highly efficient water oxidation catalysts

Support with pom poms: A hybrid material ([Co(4)(H(2)O)(2)(PW(9)O(34))(2)](10-)/mesoporous carbon nitride) is prepared as an efficient water oxidation catalyst, and shows excellent catalytic activity for water oxidation. Mesoporous carbon nitride as an immobilization matrix improves the catalytic water oxidation activity and structural durability of the assembled nanostructures.

Preparation and Characterization of Catalysts for Clean Energy: A Challenge for X-rays and Electrons

One of the most promising approaches to addressing the challenges of securing cheap and renewable energy sources is to design catalysts from earth abundant materials capable of promoting key chemical reactions including splitting water into hydrogen and oxygen (2H2O → 2H2 + O2) as well as both the oxidation (H2 → 2H+) and reduction (2H+ → H2) of hydrogen. Key to elucidating the origin of catalytic activity and improving catalyst design is determining molecular-level structure, in both the ‘resting state’ and in the functioning ‘active state’ of the catalysts. Herein, we explore some of the analytical challenges important for designing and studying new catalytic materials for making and using hydrogen. We discuss a case study that used the combined approach of X-ray absorption spectroscopy and transmission electron microscopy to understand the fate of the molecular cluster, [Mn4O4L6]+, in Nafion.

Photocatalytic Water Oxidation Using Manganese Compounds Immobilized in Nafion Polymer Membranes

Robust water oxidation catalysts using earth abundant metals are required as part of an overall scheme to convert sunlight into fuels. Here, we report the immobilization of [[Formula: see text]O(5)(terpy)(4)(H(2)O)(2)](ClO(4))(6) (terpy = 2,2';6',2″-terpyridine), [Mn(4)O(6)(tacn)(4)](ClO(4))(4) (tacn = 1,4,7-triazacyclononane), and manganese dioxide nanoparticles in Nafion on fluorine-doped tin oxide conducting glass electrodes. The electrodes are illuminated with white light in the presence of an applied potential and the resulting photocurrent is assigned to the oxidation of solvent water. Photodecomposition of the tetrameric complexes results in a material that is more active for light-driven electrooxidation of water. The reactivity, wavelength dependence, and stability of the compounds in Nafion under illumination are discussed.