Carbene-Pnictinidene Adducts

Phosphaarsenes - Combining Phospha- and Arsa-Wittig-Reagents

Dipnictenes of the type RPn=PnR (Pn=P, As, Sb, Bi) can be viewed as dimers of the corresponding pnictinidenes R-Pn. Phosphanylidene- and arsanylidenephosphoranes (R-Pn(PMe3); Pn=P, As) have been shown to be versatile synthetic surrogates for the delivery of pnictinidene fragments. We now report that thermal treatment of 1 : 1 mixtures of R-P(PMe3) and R'-As(PMe3) gives access to arsaphosphenes of the type RP=AsR'. Three examples are presented and the properties and reactivity of Mes*P=AsDipTer (1) (Mes*=2,4,6-tBu3-C6H2; DipTer=2,6-(2,6-iPr2C6H3)2-C6H3) were studied in detail. Solid state 31P NMR spectroscopy revealed a large 31P NMR chemical shift anisotropy with a span of ca. 920 ppm for 1 while computational methods were employed to investigate this pronounced magnetic deshielding of the P atom in 1. In the presence of the carbene IMe4 (IMe4=:C(MeNCMe)2) 1 is shown to be split into the corresponding NHC adducts Mes*P(IMe4) and DipTerAs(IMe4), which is additionally shown for diarsenes.

From Neutral Diarsenes to Diarsene Radical Ions and Diarsene Dications

Diarsene [L(MeO)GaAs]2 (L=HC[C(Me)N(Ar)]2, Ar=2,6-iPr2C6H3, 4) reacts with MeOTf and MeNHC (MeNHC=1,3,4,5-tetra-methylimidazol-2-ylidene) to the diarsene [L(TfO)GaAs]2 (5) and the carbene-coordinated diarsene [L(MeO)GaAsAs(MeNHC)Ga(OMe)L] (6). The NHC-coordination results in an inversion of the redox properties of the diarsene 4, which shows only a reversible reduction event at E1/2=-2.06 V vs Fc0/+1, whereas the carbene-coordinated diarsene 6 shows a reversible oxidation event at E1/2=-1.31 V vs Fc0/+1. Single electron transfer reactions of 4 and 6 yielded [K[2.2.2.]cryp][L(MeO)GaAs]2 (8) and [L(MeO)GaAsAs(MeNHC)-Ga(OMe)L][B(C6F5)4] (9) containing the radical anion [L(MeO)GaAs]2⋅- (8⋅-) and the NHC-coordinated radical cation [L(MeO)GaAsAs(MeNHC)Ga(OMe)L]⋅+ (9⋅+), respectively, while the salt-elimination reaction of the triflate-coordinated diarsene 5 with Na[B(C6F5)4] gave [LGaAs]2[B(C6F5)4]2 (11) containing the dication [LGaAs]2 2+ (112+). Compounds 1-11 were characterized by 1H and 13C NMR, EPR (8, 9), IR, and UV-Vis spectroscopy and by single crystal X-ray diffraction (sc-XRD). DFT calculations provided a detailed understanding of the electronic nature of the diarsenes (4, 6) and the radical ions (8⋅-, 9⋅+), respectively.

Isolation of an Anionic Dicarbene Embedded Sn2 P2 Cluster and Reversible CO2 Uptake

Decarbonylation of a cyclic bis-phosphaethynolatostannylene [(ADC)Sn(PCO)]2 based on an anionic dicarbene framework (ADC = PhC{N(Dipp)C}2 ; Dipp = 2,6-iPr2 C6 H3 ) under UV light results in the formation of a Sn2 P2 cluster compound [(ADC)SnP]2 as a green crystalline solid. The electronic structure of [(ADC)SnP]2 is analyzed by quantum-chemical calculations. At room temperature, [(ADC)SnP]2 reversibly binds with CO2 and forms [(ADC)2 {SnOC(O)P}SnP]. [(ADC)SnP]2 enables catalytic hydroboration of CO2 and reacts with elemental selenium and Fe2 (CO)9 to afford [(ADC)2 {Sn(Se)P2 }SnSe] and [(ADC)Sn{Fe(CO)4 }P]2 , respectively. All compounds are characterized by multinuclear NMR spectroscopy and their solid-state molecular structures are determined by single-crystal X-ray diffraction.

Synthesis and Reactivity of N-Heterocyclic Carbene Coordinated Formal Germanimidoyl-Phosphinidenes

Treatment of N-heterocyclic carbene (NHC) ligated germylidenylphosphinidene MsFluidtBu-GeP(NHCiPr) (where MsFluidtBu is a bulky hydrindacene substituent, and NHCiPr is 1,3-diisopropyl-4,5-dimethyl-imidazolin-2-ylidene) with mesityl azide and 4-tertbutylphenyl azide afforded NHC coordinated formal germanimidoyl-phosphinidenes, which represent the first compounds bearing both Ge═N double bond and phosphinidene functionalities. Studies of the chemical properties revealed that the reactions preferred to occur at the Ge═N double bond, which underwent [2 + 2] cycloadditions with CO2 and ethyl isocyanate, and coordinated with coinage metals through the nitrogen atom.

Bicyclic (alkyl)(amino)carbene (BICAAC)-supported phosphinidenes

Herein, the synthesis and characterization of bicyclic (alkyl)(amino)carbene (BICAAC)-stabilized phosphinidenes (1-4) are reported. Compounds 1-3 were obtained by reacting trihalophosphine [PX3, X = Cl (1), Br (2), I (3)] with BICAAC in THF. A BICAAC-stabilized bis-phosphinidene (4) was obtained from the reduction of compound 2. All four compounds were characterized by X-ray crystallography and heteronuclear NMR spectroscopy. Theoretical calculations indicated the predominant C(carbene)P double bond characteristic in compounds 1-4.

Isolation of (Aryl)-(Imino) Phosphide and (Aryl)-(Phosphaalkene) Amide Complexes of Alkali Metals from Carbene-Phosphinidenes under Reductive-Thermal Rearrangements

Two-electron reduction of cyclic alkyl(amino) carbene (cAAC)-supported chloro-phosphinidene cAAC=P-Cl (1) followed by unprecedented thermal rearrangements afforded the alkali metal complexes of (aryl)-(cyclic alkyl(imino)) phosphides 3 a-3 c, 4 a-4 b through migration of the 2,6-diisopropylphenyl (dipp) group from N to the P centre, and the (aryl)-(cyclic alkyl(phosphaalkene)) amide 5 through cleavage of the CMe2 -N bond followed by energetically favoured 5-exo-tet ring-closure in the presence of the alkali metals Cs (3 a-3 c), K (4 a, 4 b), and Li (5). Compound 3 a was found to be photoluminescent (PL), emitting bright orange light under a laboratory UV lamp of wavelength 365 nm with PL quantum yield (ϕPL ) of 2.6 % (λem =600 nm), and an average lifetime (τ) of 4.8 μs. Reaction of 3 a with CuCl and AgOTf afforded (aryl)-(cyclic alkyl(imino)) phosphide-stabilized tetra-nuclear CuI (6), and octa-nuclear AgI (7) clusters, respectively. Moreover, complexes 3 a-3 c provided a direct route for the stabilization of cyclic alkyl(aminoboryl) phosphaalkenes 8 a-8 c when treated with 1-bromo-N,N,N',N'-tetraisopropylboranediamine.

Triphosphiranes as phosphinidene-transfer agents - synthesis of regular and chelating NHC phosphinidene adducts

In this contribution we describe the general use of aryl-substituted triphosphiranes (Ar3P3; Ar = Mes, Dip, Tip) as phosphinidene transfer reagents towards N-heterocyclic carbenes (NHCs) to give a library of twelve N-heterocyclic carbene phosphinidene adducts of the type ArPNHC (NHCPs), in which the NHCs have varying steric profiles, allowing a systematic evaluation of their structural and NMR-spectroscopic properties. In the next series of experiments we utilized 1,3- and 1,4-phenylene bridged bis-NHCs to access a new class of chelating bis(NHCP)s, of which three derivatives could be structurally characterized. The 1,4-phenylene derivatives were shown to be susceptible to P-CNHC bond cleavage when irradiated with an LED (396 nm), providing a rare example of phosphinidene release from NHCPs. The coordination chemistry of 1,3-phenylene bridged bis(NHCP)s towards GeCl2(dioxane) and GaI3 was investigated and revealed the formation of ion-separated cationic complexes, with significant charge transfer from the ligand to the metal center according to NBO analyses.

Synthesis and Ligand Properties of Chelating Bis(N-heterocyclic carbene)-Stabilized Bis(phosphinidenes)

NHC-phosphinidene (NHCP) adducts are an emerging class of ligands with proven binding ability for main group and transition metal elements. They possess electron-rich P atoms with two lone pairs (LPs) of electrons, making them interesting platforms for the formation of multimetallic complexes. We describe herein a modular, high-yielding synthesis of bis(NHCP)s, starting from alkylidene-bridged bis(NHC)s ((IMe)2CnH2n; n = 1,3) and triphosphirane (PDip)3 (Dip = 2,6-iPr2C6H3) as phosphinidene transfer reagent. The coordination chemistry of [{DipP(IMe)}2CH2], 1, was studied in detail, and complexes [1·FeBr2] and [1·Rh(cod)]Cl were prepared, showing that the ligand has a flexible bite angle. The dicarbonyl complex [1·Rh(CO)2]Cl, with an average value for the CO stretching frequency of 2029 cm-1, indicates a strongly donating ligand when compared to related complexes. The binding ability of the remaining two phosphorus LPs was demonstrated with AuCl(SMe2), giving the heterotrimetallic complex [1·(AuCl)2·Rh(cod)]Cl. Moreover, [1·Rh(cod)]X (X- = Cl, B(3,5-(CF3)2-C6H3)4) was tested in the catalytic hydrogenation of methyl-Z-α-acetamidocinnamate (MAC) and dimethyl itaconate (ItMe2), revealing that the chloride complex was inactive, while the BArF complex demonstrated moderate activity. Additionally, [1·Rh(cod)]Cl was shown to be moderately air- and moisture-stable, slowly decomposing to the corresponding NHC-stabilized bis-dioxophosphorane, which was independently synthesized by treating the free ligand with dry O2.

Formation of a Hexaphosphido Cobalt Complex through P-P Condensation

The reaction between diphosphorus derivatives [(Cl ImDipp )P2 (Dipp)]OTf (1[OTf]) and [(Cl ImDipp )P2 (Dipp)Cl] (1[Cl]) with the cyclotetraphosphido cobalt complex [K(18c-6)][(PHDI)Co(η4 -cyclo-P4 )] (2) leads to the formation of complex [(PHDI)Co{η4 -cyclo-P6 (Dipp)(Cl ImDipp )}] (3), which features an unusual hexaphosphido ligand [Cl ImDipp =4,5-dichloro-1,3-bis(2,6-diisopropylphenyl)imidazol-2-yl, Dipp=2,6-diisopropylphenyl, 18c-6=18-crown-6, PHDI=bis(2,6-diisopropylphenyl)phenanthrene-9,10-diimine]. Complex 3 was obtained as a crystalline material with a moderate yield at low temperature. Upon exposure to ambient temperature, compound 3 slowly transforms into two other compounds, [K(18c-6)][(PHDI)Co(η4 -P7 Dipp)] (4) and [(PHDI)Co{cyclo-P5 (Cl ImDipp )}] (5). The novel complexes 3-5 were characterized using multinuclear NMR spectroscopy and single-crystal X-ray diffraction. To shed light on the formation of these compounds, a proposed mechanism based on 31 P NMR monitoring studies is presented.

1,3-Imidazole-Based Mesoionic Carbenes and Anionic Dicarbenes: Pushing the Limit of Classical N-Heterocyclic Carbenes

Classical N-heterocyclic carbenes (NHCs) featuring the carbene center at the C2-position of 1,3-imidazole framework (i.e. C2-carbenes) are well acknowledged as very versatile neutral ligands in molecular as well as in materials sciences. The efficiency and success of NHCs in diverse areas is essentially attributed to their persuasive stereoelectronics, in particular the potent σ-donor property. The NHCs with the carbene center at the unusual C4 (or C5) position, the so-called abnormal NHCs (aNHCs) or mesoionic carbenes (iMICs), are however superior σ-donors than C2-carbenes. Hence, iMICs have substantial potential in sustainable synthesis and catalysis. The main obstacle in this direction is rather demanding synthetic accessibility of iMICs. The aim of this review article is to highlight recent advances, particularly by the author's research group, in accessing stable iMICs, quantifying their properties, and exploring their applications in synthesis and catalysis. In addition, the synthetic viability and use of vicinal C4,C5-anionic dicarbenes (ADCs), also based on an 1,3-imidazole framework, are presented. As will be apparent on following pages, iMICs and ADCs hold potentials in pushing the limit of classical NHCs by enabling access to conceptually new main-group heterocycles, radicals, molecular catalysts, ligands sets, and more.

Free Ethynylarsinidene and Ethynylstibinidene: Heavier Analogues of Nitrenes and Phosphinidenes

Until now, there has been very little experimental evidence for the existence of free arsinidenes and stibinidenes, apart from the hydrides, AsH and SbH. Here, we report on photogeneration of triplet ethynylarsinidene, HCCAs, and triplet ethynylstibinidene, HCCSb, from ethynylarsine and ethynylstibine, respectively, in solid argon matrices. The products were identified using infrared spectroscopy and the associated UV absorption spectra are interpreted with the aid of theoretical predictions.

Carbene chemistry of arsenic, antimony, and bismuth: origin, evolution and future prospects

The discovery of the first isolable N-heterocyclic carbene in 1991 ushered in a new era in coordination chemistry. The remarkable bonding properties of carbenes have led to their rapid proliferation as auxiliary ligands for a wide range of transition metals and main group elements. In the case of group 15, while carbene-stabilized nitrogen and phosphorus compounds are extensively studied, the scope of research has shrunk significantly from arsenic to bismuth. This is essentially attributed to the decrease in stability of the C-E bond upon descending the group. Even so, modulating the carbene backbone or introducing alternative synthetic strategies not only alleviates the stability issues but also offers promising results in terms of the bonding and reactivities of these compounds. The purpose of the present perspective is to provide a comprehensive overview of the origins and development of carbene chemistry of arsenic, antimony, and bismuth, as well as to highlight the future prospects of this field.

A Carbene-Stabilized Boryl-Phosphinidene

Herein, the synthesis and characterization of the carbene-stabilized boryl phosphinidenes 1-3 are reported. Compounds 1-3 are obtained by reacting Me-cAAC=PK (Me2 -cAAC=dimethyl cyclic(alkyl)(amino)carbene) and dihaloaryl borane in toluene. All three compounds were characterized by X-ray crystallography. Quantum mechanical studies indicated that these compounds have two lone pairs on the P center viz., an σ-type lone pair and a "hidden" π-type lone pair. Hence, these compounds can act as double Lewis bases, and the basicity of the π-type lone pair is higher than the σ-type lone pair.

N-Heterocyclic Carbene-Phosphinidenide Complexes as Hydroboration Catalysts

The reactions of the N-heterocyclic carbene-phosphinidene adducts (NHC)PSiMe₃ and (NHC)PH with the dinuclear ruthenium and osmium complexes [(η⁶-p-cymene)MCl₂]₂ (M = Ru, Os) afforded the half-sandwich complexes [(η⁶-p-cymene){(NHC)P}MCl] and [(η⁶-p-cymene){(NHC)PH}MCl₂] with two- and three-legged piano-stool geometries, respectively (NHC = IDipp, IMes; IDipp = 1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene; IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene). The complexes were initially tested as precatalysts for the hydroboration of benzonitrile, and the most active species, the ruthenium complex [(η⁶-p-cymene){(IMes)P}RuCl], was further used for the efficient hydroboration of a wide range (ca. 50 substrates) of nitriles, carboxylic esters, and carboxamides in neat pinacolborane (HBpin) under comparatively mild reaction conditions (60-80 °C, 3-5 mol % catalyst loading). Preliminary mechanistic and kinetic studies are reported, and stoichiometric reactions with HBpin indicate the initial formation of the monohydride complex [(η⁶-p-cymene){(IMes)P}RuH] as the putative catalytically active species.

A neutral analogue of a phosphamethine cyanine

Reaction of an imidazolio-phosphide with a N-heterocyclic bromo-borane and NaH afforded a neutral analogue of a phosphamethine cyanine cation. DFT studies were used to analyse the dative bonding across P–C/B...

Switching from Heteronuclear Allyl Cations to Vinyl Cations by Using a Chemical Charge Trap

Halide abstraction of the carbene-coordinated pnictinidenes (^MecAAC)EGa(Cl)L (E = As 1, Sb 2, Bi 3, ^MecAAC = [H₂C(CMe₂)₂NDipp]C; L = HC[C(Me)NDipp]₂; Dipp = 2,6-i-Pr₂C₆H₃) yielded the series of cationic group 15 compounds [(^MecAAC)EGaL][Al(OR^F)₄] (E = As 4, Sb 5; Al(OR^F)₄ = Al(OC(CF₃)₃)₄) and [(^MecAAC)EGaL][B(Ar^F)₄] (E = Sb 6, Bi 7; B(Ar^F)₄ = B[C₆H₃(CF₃)₂]₄), which were characterized by heteronuclear NMR spectroscopy and sc-XRD. The electronic nature of the cations [(^MecAAC)EGaL]⁺ is controlled by the central pnictogen atom, according to quantum chemical calculations. The calculations furthermore demonstrated that compounds containing the lighter pnictogens (E = N, P) are best described as heteronuclear allyl cations, whereas heavier pnictogen atoms (E = As, Sb, Bi) serve as a trap for the positive charge, resulting in carbene-stabilized heterovinyl-type structures.

A Brønsted Acidic Gallium Hydride: Facile Interconversion of NNNN-Macrocycle Supported [GaI]+ and [GaIIIH]2

Protonolysis of [Cp*M] (M=Ga, In, Tl) with [(Me₄TACD)H][BAr₄^Me] (Me₄TACD=N,N′,N′′,N′′′‐tetramethyl‐1,4,7,10‐tetraazacyclododecane; [BAr₄^Me]⁻=[B{C₆H₃‐3,5‐(CH₃)₂}₄]⁻) provided monovalent salts [(Me₄TACD)M][BAr₄^Me], whereas [Cp*Al]₄ yielded trivalent [(Me₄TACD)AlH][BAr₄^Me]₂. Protonation of [(Me₄TACD)Ga][BAr₄^Me] with [Et₃NH][BAr₄^Me] gave an unusually acidic (pK_a(CH₃CN)=24.5) gallium(III) hydride dication [(Me₄TACD)GaH][BAr₄^Me]₂. Deprotonation with IMe₄ (1,3,4,5‐tetramethyl‐imidazol‐ylidene) returned [(Me₄TACD)Ga][BAr₄^Me]. These reversible processes occur with formal two‐electron oxidation and reduction of gallium. DFT calculations suggest that gallium(I) protonation is facilitated by strong coordination of the tetradentate ligand, which raises the HOMO energy. High nuclear charge of [(Me₄TACD)GaH]²⁺ facilitates hydride‐to‐metal charge transfer during deprotonation. Attempts to prepare a gallium(III) dihydride cation resulted in spontaneous dehydrogenation to [(Me₄TACD)Ga]⁺.

A PH-functionalized dicationic bis(imidazolio)diphosphine

Reaction of the iodide salt of a secondary imidazolio-iodophosphine [(L)PHI]I (L⁺ = 1,3-diarylimidazolium-yl) with an imidazolio-phosphide (L)PH in the presence of GaI₃ afforded the isolable salt of a dicationic, bis(imidazolio)-substituted dihydro-diphosphine [(L)₂P₂H₂][GaI₄]₂. Non-preparative formation of the cationic diphosphines was also observed upon spontaneous "dehalo-coupling" of [(L)PHI]⁺, or in reactions of [(L)PHI]I and (L)PH in the absence of GaI₃. Further reaction of [(L)₂P₂H₂]²⁺ with (L)PH produced an iodide salt of a known (bis)imidazolio-diphosphide monocation [(L)₂P₂H]⁺. The identity of cationic diphosphines and diphosphides was established by single-crystal X-ray diffraction studies. NMR spectroscopy revealed that dications [(L)₂P₂H₂]²⁺ exist as a mixture of meso- and rac-diastereomers in solution. Computational studies confirmed the stereochemical assignment of the isomers observed, and gave insight into the bonding situation of the diphosphine dications.

Rhodium and Iridium Complexes of Anionic Thione and Selone Ligands Derived from Anionic N-Heterocyclic Carbenes

The lithium salts of anionic N‐heterocyclic thiones and selones [{(WCA‐IDipp)E}Li(toluene)] (1: E=S; 2: E=Se; WCA=B(C₆F₅)₃, IDipp=1,3‐bis(2,6‐diisopropylphenyl)imidazolin‐2‐ylidene), which contain a weakly coordinating anionic (WCA) borate moiety in the imidazole backbone were reacted with Me₃SiCl, to furnish the silylated adducts (WCA‐IDipp)ESiMe₃ (3: E=S; 4: E=Se). The reaction of the latter with [(η⁵‐C₅Me₅)MCl₂]₂ (M=Rh, Ir) afforded the rhodium(III) and iridium(III) half‐sandwich complexes [{(WCA‐IDipp)E}MCl(η⁵‐C₅Me₅)] (5–8). The direct reaction of the lithium salts 1 and 2 with a half or a full equivalent of [M(COD)Cl]₂ (M=Rh, Ir) afforded the monometallic complexes [{(WCA‐IDipp)E}M(COD)] (9–12) or the bimetallic complexes [μ₂‐{(WCA‐IDipp)E}M₂(COD)₂(μ₂‐Cl)] (13–16), respectively. The bonding situation in these complexes has been investigated by means of density functional theory (DFT) calculations, revealing thiolate or selenolate ligand character with negligible metal‐chalcogen π‐interaction.

Generation and reactivity of an elusive base-stabilised phosphinidene

Reduction of phosphorus dichloride 6, supported by the diaryloxyphenyl group (OCO) featuring two bulky phenoxy wingtips, by PMe₃, generates a reactive intermediate that behaves as a base-stabilized phosphinidene (OCO)P (5). Warming up a solution of this species in toluene to room temperature results in trimerization to give the isolable cyclic triphosphine [(OCO)P]₃, whereas in situ trapping with 2,3-dimethylbutadiene-1,3 afforded a 3,4-dimethylphospholene-3. Investigation of the reduction of 6 by the phosphine PMe₃ by NMR led to the observation of a persistent species between -10 °C and 10 °C. A DFT study of this process suggests that this compound cannot be the proposed phosphinidene 5, and is more likely the diphosphine (OCO)ClP-PCl(OCO) (12). Attempted reduction of 5 by the bulky carbene IPr resulted in unusual electrophilic substitution in the carbene olefin backbone by the chlorophosphinyl group.

Application of ferrocene-bridged N-heterocyclic carbene stabilised bis-phosphinidenes in Sn(II) complexation

Two new bidentate ferrocene-bridged bis(N-heterocyclic carbene-phospinidenes) (bisNHCPs) were successfully isolated by treating 1,1'-bis-(dichlorophosphine)ferrocene with N-heterocyclic carbenes, followed by dechlorination using sodium naphthalenide. The bisNHCPs were used in complexation of various Sn(II) halides and Sn(II) bistriflate (SnX₂ with X = Cl, Br, I, OTf). Transmetalation to a CuCl complex and Sn(II) transfer to a bisimine was performed to investigate the stannyliumylidenes' reactivity.

Phosphine-Stabilized Pnictinidenes

The reaction of the intramolecular germylene‐phosphine Lewis pair (o‐PPh₂)C₆H₄GeAr* (1) with Group 15 element trichlorides ECl₃ (E=P, As, Sb) was investigated. After oxidative addition, the resulting compounds (o‐PPh₂)C₆H₄(Ar*)Ge(Cl)ECl₂ (2: E=P, 3: E=As, 4: E=Sb) were reduced by using sodium metal or LiHBEt₃. The molecular structures of the phosphine‐stabilized phosphinidene (o‐PPh₂)C₆H₄(Ar*)Ge(Cl)P (5), arsinidene (o‐PPh₂)C₆H₄(Ar*)Ge(Cl)As (6) and stibinidene (o‐PPh₂)C₆H₄(Ar*)Ge(Cl)Sb (7) are presented; they feature a two‐coordinate low‐valent Group 15 element. After chloride abstraction, a cyclic germaphosphene [(o‐PPh₂)C₆H₄(Ar*)GeP] [B(C₆H₃(CF₃)₂)₄] (8) was isolated. The ³¹P NMR data of the germaphosphene were compared with literature examples and analyzed by quantum chemical calculations. The phosphinidene was treated with [iBu₂AlH]₂, and the product of an Al−H addition to the low‐valent phosphorus atom (o‐PPh₂)C₆H₄(Ar*)Ge(H)P(H)Al(C₄H₉)₂ (9) was characterized.

Non-conventional Behavior of a 2,1-Benzazaphosphole: Heterodiene or Hidden Phosphinidene?

The titled 2,1-benzazaphosphole (1) (i. e. ArP, where Ar=2-(DippN=CH)C6 H4 , Dipp=2,6-iPr2 C6 H3 ) showed a spectacular reactivity behaving both as a reactive heterodiene in hetero-Diels-Alder (DA) reactions or as a hidden phosphinidene in the coordination toward selected transition metals (TMs). Thus, 1 reacts with electron-deficient alkynes RC≡CR (R=CO2 Me, C5 F4 N) giving 1-phospha-1,4-dihydro-iminonaphthalenes 2 and 3, that undergo hydrogen migration producing 1-phosphanaphthalenes 4 and 5. Compound 1 is also able to activate the C=C double bond in selected N-alkyl/aryl-maleimides RN(C(O)CH)2 (R=Me, tBu, Ph) resulting in the addition products 7-9 with bridged bicyclic [2.2.1] structures. The binding of the maleimides to 1 is semi-reversible upon heating. By contrast, when 1 was treated with selected TM complexes, it serves as a 4e donor bridging two TMs thus producing complexes [μ-ArP(AuCl)2 ] (10), [(μ-ArP)4 Ag4 ][X]4 (X=BF4 (11), OTf (12)) and [μ-ArP(Co2 (CO)6 )] (13). The structure and electron distribution of the starting material 1 as well as of other compounds were also studied from the theoretical point of view.

Carbodicarbene Bismaalkene Cations: Unravelling the Complexities of Carbene versus Carbone in Heavy Pnictogen Chemistry

We report a combined experimental and theoretical study on the first examples of carbodicarbene (CDC)-stabilized bismuth complexes, which feature low-coordinate cationic bismuth centers with C=Bi multiple-bond character. Monocations [(CDC)Bi(Ph)Cl][SbF6 ] (8) and [(CDC)BiBr2 (THF)2 ][SbF6 ] (11), dications [(CDC)Bi(Ph)][SbF6 ]2 (9) and [(CDC)BiBr(THF)3 ][NTf2 ]2 (12), and trication [(CDC)2 Bi][NTf2 ]3 (13) have been synthesized via sequential halide abstractions from (CDC)Bi(Ph)Cl2 (7) and (CDC)BiBr3 (10). Notably, the dications and trication exhibit C ⇉ Bi double dative bonds and thus represent unprecedented bismaalkene cations. The synthesis of these species highlights a unique non-reductive route to C-Bi π-bonding character. The CDC-[Bi] complexes (7-13) were compared with related NHC-[Bi] complexes (1, 3-6) and show substantially different structural properties. Indeed, the CDC ligand has a remarkable influence on the overall stability of the resulting low-coordinate Bi complexes, suggesting that CDC is a superior ligand to NHC in heavy pnictogen chemistry.

Di-tert-butyldiphosphatetrahedrane as a building block for phosphaalkenes and phosphirenes

The remarkable 'mixed' diphosphatetrahedrane (tBuCP)2 (1) - which is both the elusive dimeric form of the phosphaalkyne tBuCP and an isolobal analogue of the important industrial feedstock P4 - was recently isolated for the first time; however, its chemistry remains unexplored. Herein we report that treatment of 1 with various N-heterocyclic carbenes readily yields unusual, unsaturated organophosphorus motifs. These results demonstrate the significant potential of 1 as a building block for the synthesis of previously unknown organophosphorus compounds.

Aryl-substituted triarsiranes: synthesis and reactivity

Cyclotriarsanes are rare and described herein is a scalable synthetic protocol towards (AsAr)3, which allowed to study their reactivity towards [Cp2Ti(C2(SiMe3)2)], affording titanocene diarsene complexes, and towards N-heterocyclic carbenes (NHCs) to give straightforward access to a variety of NHC-arsinidene adducts.

The Reactivity of Phosphanylphosphinidene Complexes of Transition Metals Toward Terminal Dihaloalkanes

The reactivities of phosphanylphosphinidene complexes [(DippN)₂W(Cl)(η²-P–PtBu₂)]⁻ (1), [(pTol₃P)₂Pt(η²-P=PtBu₂)] (2), and [(dppe)Pt(η²-P=PtBu₂)] (3) toward dihaloalkanes and methyl iodide were investigated. The reactions of the anionic tungsten complex (1) with stochiometric Br(CH₂)_nBr (n = 3, 4, 6) led to the formation of neutral complexes with a tBu₂PP(CH₂)₃Br ligand or neutral dinuclear complexes with unusual tetradentate tBu₂PP(CH₂)_nPPtBu₂ ligands (n = 4, 6). The methylation of platinum complexes 2 and 3 with MeI yielded neutral or cationic complexes bearing side-on coordinated tBu₂P–P-Me moieties. The reaction of 2 with I(CH₂)₂I gave a platinum complex with a tBu₂P—P—I ligand. When the same dihaloalkane was reacted with 3, the P—P bond in the phosphanylphosphinidene ligand was cleaved to yield tBu₂PI, phosphorus polymers, [(dppe)PtI₂] and C₂H₄. Furthermore, the reaction of 3 with Br(CH₂)₂Br yielded dinuclear complex bearing a tetraphosphorus tBu₂PPPPtBu₂ ligand in the coordination sphere of the platinum. The molecular structures of the isolated products were established in the solid state and in solution by single-crystal X-ray diffraction and NMR spectroscopy. DFT studies indicated that the polyphosphorus ligands in the obtained complexes possess structures similar to free phosphenium cations tBu₂P⁺=P−R (R = Me, I) or (tBu₂P⁺=P)₂.

The phosphanylphosphinidene complexes of tungsten and platinum as building blocks for syntheses of polydentate phosphorus ligands.

Stretching the P-C Bond. Variations on Carbenes and Phosphanes

The stability and the structure of adducts formed between four substituted phosphanes (PX3, X:H, F, Cl, and NMe2) and 11 different carbenes have been investigated by DFT calculations. In most cases, the structure of the adducts depends strongly on the stability of the carbene itself, exhibiting a linear correlation with the increasing dissociation energy of the adduct. Carbenes of low stability form phosphorus ylides (F), which can be described as phosphane → carbene adducts supported with some back-bonding. The most stable carbenes, which have high energy lone pair, do not form stable F-type structures but carbene → phosphane adducts (E-type structure), utilizing the low-lying lowest unoccupied molecular orbital (LUMO) of the phosphane (with electronegative substituents), benefiting also from the carbene-pnictogen interaction. Especially noteworthy is the case of PCl3, which has an extremely low energy LUMO in its T-shaped form. Although this PCl3 structure is a transition state of rather high energy, the large stabilization energy of the complex makes this carbene-phosphane adduct stable. Most interestingly, in case of carbenes with medium stability both F- and E-type structures could be optimized, giving rise to bond-stretch isomerism. Likewise, for phosphorus ylides (F), the stability of the adducts G formed from carbenes with hypovalent phosphorus (PX-phosphinidene) is in a linear relationship with the stabilization of the carbene. Adducts of carbenes with hypervalent phosphorus (PX5) are the most stable when X is electronegative, and the carbene is highly nucleophilic.

Chalcogen complexes of anionic N-heterocyclic carbenes

Chalcogen complexes of anionic N-heterocyclic carbenes were isolated as lithium salts and their protonation and oxidation were studied.

Proton transfer vs. oligophosphine formation by P–C/P–H σ-bond metathesis: decoding the competing Brønsted and Lewis type reactivities of imidazolio-phosphines

Cationic imidazolio-phosphines show two-sided reactivity towards bases, undergoing either Brønsted-type proton transfer to imidazolio-phosphides or autocatalytic Lewis acid/base reaction cascades to yield P-free imidazolium ions and oligophosphines.

Controlled scrambling reactions to polyphosphanes via bond metathesis reactions

Triphosphanes R'2PP(R)PR'2 (9a,c: R = Py; 9b R = BTz), 1,3-diphenyl-2-pyridyl-triphospholane 9d and pentaphospholanes (RP)5 (13: R = Py; 18: R = BTz) are obtained in high yield of up to 98% from the reaction of dipyrazolylphosphanes RPpyr2 (5: R = Py; 6: R = BTz; pyr = 1,3-dimethylpyrazolyl) and the respective secondary phosphane (R'2PH, R' = Cy (9a,b), t Bu (9c); PhPH(CH2)2PHPh (9d)). The formation of derivatives 9a-d proceeds via a condensation reaction while the formation of 13 and 18 can only be explained by a selective scrambling reaction. We realized that the reaction outcome is strongly solvent dependent as outlined by the controlled scrambling reaction pathway towards pentaphospholane 13. In our further investigations to apply these compounds as ligands we first confined ourselves to the coordination chemistry of triphosphane 9a with respect to coinage metal salts and discussed the observation of different syn- and anti-isomeric metal complexes based on NMR and X-ray analyses as well as quantum chemical calculations. Methylation reactions of 9a with MeOTf yield triphosphan-1-ium Cy2MePP(Py)PCy2 + (10 +) and triphosphane-1,3-diium Cy2MePP(Py)PMeCy2 2+ (11 2+) cations as triflate salts. Salt 11[OTf]2 reacts with pentaphospholane 13 in an unprecedented chain growth reaction to give the tetraphosphane-1,4-diium triflate salt Cy2MePP(Py)P(Py)PMeCy2 2+ (19[OTf]2) via a P-P/P-P bond metathesis reaction. The latter salt is unstable in solution and rearranges via a rare [1,2]-migration of the Cy2MeP-group followed by the elimination of the triphosph-2-en-1-ium cation [Cy2MePPPMeCy2]+ (20 +) to yield a novel 1,4,2-diazaphospholium salt (21[OTf]).

Isolation of Carbene-Stabilized Arsenic Monophosphide [AsP] and its Radical Cation [AsP]+. and Dication [AsP]2

Arsenic monophosphide (AsP) species supported by two different N-heterocyclic carbenes were prepared by reaction of (IDipp)PSiMe3 (1) (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene) with (IMes)AsCl3 (2) (IMes=1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene) to afford the dichloride [(IMes)As(Cl)P(IDipp)]Cl (3), which upon reduction with KC8 furnished heteroleptic [(IMes)AsP(IDipp)] (4). The corresponding mono- and dications [(IMes)AsP(IDipp)][PF6 ], [5]PF6 , and [(IMes)AsP(IDipp)][GaCl4 ]2, [6][GaCl4 ]2 , respectively, were prepared by one-electron oxidation of 4 with ferrocenium hexafluorophosphate, [Fc]PF6, or by chloride abstraction from 3 with two equivalents of GaCl3 , respectively. Compounds 4-6 represent rare examples of heterodiatiomic interpnictogen compounds, and X-ray crystal structure determinations together with density functional theory (DFT) calculations reveal a consecutive shortening of the As-P bond lengths and increasing bond order, in agreement with the presence of an arsenic-phosphorus single bond in 4 and a double bond in 62+ . The EPR signal of the cationic radical [5]+. indicates a symmetric spin distribution on the AsP moiety through strong hyperfine coupling with the 75 As and 31 P nuclei.

Antimony(i) → Pd(ii) complexes with the (μ-Sb)Pd2 coordination framework

The reaction of the antimony(i) compound ArSb (1) (where Ar = C₆H₃-2,6-(CH[double bond, length as m-dash]NtBu)₂) with various dimeric allyl palladium(ii) complexes [Pd(η³-allyl)(μ-X)]₂ (where allyl = C₃H₅ or C₃H₄Me; X = Cl or CF₃CO₂) in a 1 : 1 stoichiometric ratio gave unique complexes with the μ-ArSb moiety bridging two palladium fragments, i.e. [{Pd(η³-C₃H₅)Cl}₂(μ-ArSb)] (2), [{Pd(η³-C₃H₄Me)Cl}₂(μ-ArSb)] (3) and [{Pd(η³-C₃H₅)(CF₃CO₂)}₂(μ-ArSb)] (4). Compound 1 serves formally as a 4e donor in 2-4. The treatment of 2 with another equivalent of ArSb led to the formation of the [Pd(η³-C₃H₅)(Cl)(μ-ArSb)] complex (5), proving that 1 is able to function as a 2e donor in target complexes as well. The structures of 2-5 were described in detail both in solution (NMR and mass spectrometry) and in the solid state (single crystal X-ray diffraction analysis). DFT methods were used to compare bonding in the 1 : 1 (5) and 1 : 2 (2) complexes. Furthermore, a comprehensive ¹²¹Sb Mössbauer spectroscopic investigation of complexes 2 and 5 along with parent ArSbCl₂ (6) and 1 was performed. For comparison, complexes [Fe(CO)₄(ArSb)] (7) and [Mo(CO)₅(ArSb)] (8) were also included in this study.