Adsorptive Demercuration by Virtue of an Appealing Interaction Involving Biopolymer Cellulose and Mercaptobenzothiazole

Modelling and optimising the performance of graphene oxide-Cu2SnS3-polyaniline nanocomposite as an adsorbent for mercury ion removal

Finding a cost-effective, efficient, and environmentally friendly technique for the removal of mercury ion (Hg2+) in water and wastewater can be a challenging task. This paper presents a novel and efficient adsorbent known as the graphene oxide-Cu2SnS3-polyaniline (GO-CTS-PANI) nanocomposite, which was synthesised and utilised to eliminate Hg2+ from water samples. The soft-soft interaction between Hg2+ and sulphur atoms besides chelating interaction between -N and Hg2+ is the main mechanism for Hg2+ adsorption onto the GO-CTS-PANI adsorbent. Various characterisation techniques, including Fourier transform infrared spectrophotometry (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), elemental mapping analysis, and X-ray diffraction analysis (XRD), were employed to analyse the adsorbent. The Box-Behnken method, utilising Design Expert Version 7.0.0, was employed to optimise the crucial factors influencing the adsorption process, such as pH, adsorbent quantity, and contact time. The results indicated that the most efficient adsorption occurred at pH 6.5, with 12 mg of GO-CTS-PANI adsorbent, and 30-min contact time that results in a maximum removal rate of 95% for 50 mg/L Hg2+ ions. The study also investigated the isotherm and kinetics of the adsorption process that the adsorption of Hg2+ onto the adsorbent happened in sequential layers (Freundlich isotherm) and followed by the pseudo-second-order kinetic model. Furthermore, response surface methodology (RSM) analysis indicates that pH is the most influential parameter in enhancing adsorption efficiency. In addition to traditional models, this study employed some artificial intelligence (AI) methods including the Random Forest algorithm to enhance the prediction of adsorption process efficiency. The findings demonstrated that the Random Forest algorithm exhibited high accuracy with a correlation coefficient of 0.98 between actual and predicted adsorption rates. This study highlights the potential of the GO-CTS-PANI nanocomposite for effectively removing of Hg2+ ions from water resources.

Adsorption of Hg(II) on polyethyleneimine-functionalized carboxymethylcellulose beads: Characterization, toxicity tests, and adsorption experiments

Mercury (Hg) is widely used in many industrial processes and is released into the environment. Therefore, efficient removal of Hg from water is of vital importance worldwide. Here, we explored the adsorption characteristics of Hg(II) on polyethyleneimine-functionalized carboxymethylcellulose (PEI-CMC) beads and studied the toxicity of the beads toward Daphnia magna and Pseudokirchneriella subcapitata. The PEI-CMC beads had an average particle size of 2.04 ± 0.25 mm, a point of zero charge (pH_pzc) of 5.8, and a swelling ratio of 2.45. Acute toxicity tests demonstrated that the PEI-CMC beads had no toxic effects on D. magna. The growth inhibition tests revealed that growth inhibition of P. subcapitata could be attributed to adsorption of trace elements in growth media on the PEI-CMC beads. The adsorption experiments exhibited that the Matthews and Weber model best described the kinetic data, whereas the Redlich-Peterson model was well fitted to the isotherm data. The theoretical maximum Hg(II) adsorption capacity of the PEI-CMC beads was 313.1 mg/g. The thermodynamic experiments showed endothermic nature of the Hg(II) adsorption on the PEI-CMC beads at 10-40 °C. The adsorption experiments exhibited that the Hg(II) adsorption capacity decreased gradually as pH increased from 2 to 12. The adsorption of Hg(II) on the PEI-CMC beads can occur through chelation and electrostatic attraction. The FTIR and XPS spectra before and after Hg(II) adsorption confirmed that chelation of neutral Hg(II) species (HgCl₂, HgClOH, and Hg(OH)₂) can occur with amino and oxygen-containing functional groups on the PEI-CMC beads. Considering species distribution of Hg(II) and the pH_pzc of the PEI-CMC beads, electrostatic attraction between the positively-charged beads and anionic Hg(II) species (HgCl₃^- and HgCl₄^2-) can take place in highly acidic solutions. The PEI-CMC beads were regenerated and reused for Hg(II) adsorption using 0.1 M HCl.

Enhanced immobilization of mercury (II) from desulphurization wastewater by EDTA functionalized graphene oxide nanoparticles

Graphene oxide (GO) is a new promising nanometer material in a superconductor and wastewater heavy metal ions removal for its functionalized groups. Ethylenediaminetetraacetic acid functionalized graphene oxide complexes (EDTA-GO) was produced by a realizable silanization chemical reaction. Characteristics of Hg(II) removal in desulphurization wastewater was also under investigation. The chemical composition and microstructures of the EDTA-GO adsorbents were characterized by X-ray photoelectron spectroscopy (XPS), Transmission electron microscope (TEM), Scanning Electron Microscopy (SEM) analyses. To investigate the performance of EDTA-GO adsorbents on adsorption of Hg(II) in wastewater of wet flue gas desulphurization (WFGD), experiments were performed to optimize the main influence factors such as reaction temperatures (35-70°C), pH values(2-13), contact time (0-120 min), initial Hg(II) concentrations(800 ug/L) and adsorbent doses (20-50 mg/L). The maximum uptake removal efficiency (97.14%) was achieved under the optimal conditions at the pH of 7, the temperature of 70°C, the Hg(II) concentration of 1200 μg/L and the EDTA-GO dose of 40 mg/L. The kinetic data fitting results were well consistent with the pseudo-second-order model (R²= 0.99997) and a spontaneous and endothermic adsorption reaction was elaborated by thermodynamics studies (ΔG < 0, ΔH > 0, ΔS > 0). The experiments of recycled adsorbents by HCl generation were carried out to obtain the performance of the reused EDTA-GO adsorbent, the fourth regenerative adsorption efficiency still maintained 80.4%, which indicated that excellent potential application in desulphurization wastewater treatment.

A green l-cysteine modified cellulose nanocrystals biosorbent for adsorption of mercury ions from aqueous solutions

Using a green biosorbent to remove toxic mercury ions from aqueous solutions is a significant undertaking. In the present study, a novel biosorbent, l-cysteine modified cellulose nanocrystals (Lcys-CNCs), was prepared by functionalizing high surface area cellulose nanocrystals with l-cysteine through periodate oxidation and reductive amination reaction. Lcys-CNCs were characterized by FT-IR, ¹³C CP-MAS NMR, elemental analysis, XPS, zeta potential and SEM. As cellulose nanocrystals are the natural nanomaterial, and l-cysteine contains strong mercury chelating groups, Lcys-CNCs show excellent adsorption capacity for mercury ions. The experimental conditions such as pH, contact time, and initial mercury ion concentration are discussed. The pseudo-second order model can describe the removal kinetics of Hg(ii) more accurately than the pseudo-first order model. The adsorption isotherm study of Hg(ii) followed the Langmuir model of monolayer adsorption. The maximum uptake capacity of Lcys-CNCs was determined to be 923 mg g⁻¹. Lcys-CNCs can remove mercury ions with 93% removal efficiency within 5 min from a 71 mg L⁻¹ solution. For Cd(ii), Pb(ii), Cu(ii) and Zn(ii) ions, Lcsy-CNCs can selectively adsorb Hg(ii) ions and the removal efficiency is 87.4% for Hg(ii). This study suggests Lcsy-CNCs are a green and highly efficient biosorbent for adsorption of mercury ions from aqueous solutions.

A green biosorbent, l-cysteine modified cellulose nanocrystals, was successfully synthesized and applied to adsorb mercury ions from aqueous solutions.

Simple synthesis and characterization of l-Cystine functionalized δ-FeOOH for highly efficient Hg(II) removal from contamined water and mining waste

l-Cystine functionalized δ-FeOOH nanoparticles (Cys-δ-FeOOH) were prepared by a cheap and straightforward method for using as an adsorbent of Hg(II) in aqueous solution. X-ray diffraction (XRD), attenuated total reflectance infrared spectroscopy (ATR-IR), and Raman spectroscopy confirmed that Cys-δ-FeOOH was successfully synthesized. Cys-δ-FeOOH with 14 nm crystal size, 34 m² g^-1 surface area, and 9 nm pore size were produced. The functionalization of the δ-FeOOH surface with cysteine decreases the point of zero charge of the iron oxyhydroxide from 8.4 in δ-FeOOH to 5.7 in Cys-δ-FeOOH, which is beneficial for the adsorption of Hg(II) near neutral pH. The maximum Hg(II) adsorption capacity of the δ-FeOOH and Cys-δ-FeOOH at pH 7 were found to be 35 mg g^-1 and 217 mg g^-1, respectively. The kinetics data were best fitted by a pseudo-second-order model, suggesting chemical adsorption on the surface and pores of Cys-δ-FeOOH nanoparticles. Finally, δ-FeOOH and Cys-δ-FeOOH filters were constructed for purifying mercury-contaminated water. The filters were highly efficient to treat mercury-contaminated water from a Brazilian river, reducing the concentration of mercury in water to values below the allowed limits by the current legislation.

Fabrication and Evaluation of Cellulose-Alginate-Hydroxyapatite Beads for the Removal of Heavy Metal Ions from Aqueous Solutions

In the present study, the potential of synthesized mixed cellulose, alginate and hydroxyapatite beads for the efficient removal of Ni (II) and Cu (II) ions from aqueous solutions was investigated. Cellulose, alginate and hydroxyapatite are known for their individual adsorption capacity. Beads were prepared in different ratios of these materials. The prepared beads were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and thermogravimetric analysis (TGA). FTIR and XRD analysis showed characteristic peaks assigned to cellulose, alginate and hydroxyapatite. Thermal stability was observed to increase with increase of hydroxyapatite percentage in beads. SEM images showed increased surface porosity and roughness with the increase of cellulose percentage. The prepared beads were used for the removal of Ni (II) and Cu (II) ions from aqueous solutions and the process was optimized with respect to pH, contact time, adsorbent dose and initial concentration of metal ions. The values of the coefficient of determination (R2) of the Langmuir and Freundlich adsorption model indicated that the adsorbed Cu (II) and Ni (II) ions form monolayer coverage on the adsorbent surface. In kinetic analysis, Pseudo-second-order model fitted the kinetic experimental data well, as it showed high R2 value; above 0.9990.

Effective Adsorption of Precious Metal Palladium over Polyethyleneimine-Functionalized Alumina Nanopowder and Its Reusability as a Catalyst for Energy and Environmental Applications

Palladium is one of the widely used precious metals toward catalysis, energy, and environmental applications. Efficient recovery and reusability of palladium from the spent catalysts is not only highly desirable for sustainable industrial processing but also for preventing environmental contamination. Here, we present a facile citrate-mediated amine functionalization of alumina nanopowder (AO) in aqueous medium. The surface functionalization is probed using infrared (IR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis, surface area, and zeta potential measurements. The amine-functionalized sorbent is thoroughly studied for its vital palladium-sorption parameters such as amount of adsorbent, pH, adsorption capacity, thermodynamics, and kinetics. The palladium adsorption over amine-functionalized AO is further characterized with X-ray diffraction and XPS. IR analysis of palladium adsorbed over polyethyleneimine is performed to elucidate the mechanistic insight on the role of nitrogen in capturing palladium. The amine-functionalized sorbent after adsorbing palladium is studied for the catalytic reduction of 4-nitrophenol and Cr(VI) and hydrogen generation from ammonia borane, which demonstrated its excellent catalytic activity and reusability toward energy and environmental applications. The environmentally benign materials and all-aqueous reactions employed in this work demonstrate the potential of the strategy for efficient and economical industrial transformations and waste-stream management.

Isopentyl-Sulfide-Impregnated Nano-MnO₂ for the Selective Sorption of Pd(II) from the Leaching Liquor of Ores

Conventional separation methods are not suitable for recovering palladium present in low concentrations in ore leaching solutions. In this study, a novel isopentyl sulfide (S₂₀₁)-impregnated α-MnO₂ nanorod adsorbent (BISIN) was prepared, characterized, and applied for the selective adsorption and separation of palladium from the leaching liquor of ores. Batch studies were carried out, and the main adsorption parameters were systematically investigated, in addition to the relevant thermodynamic parameters, isotherms, and kinetic models. The thermodynamic parameters reflected the endothermic and spontaneous nature of the adsorption. Moreover, the experimental results indicated that the Langmuir isotherm model fits the palladium adsorption data well and the adsorption was well described by the pseudo-second-order kinetic model. The main adsorption mechanisms of palladium were elucidated at the molecular level by X-ray crystal structure analysis. Thiourea was found to be an excellent desorption agent, and the palladium-thiourea complex was also confirmed by X-ray crystal structure analysis. The results indicated that almost all of the Pd(II) (>99.0%) is adsorbed on BISIN, whereas less than 2% of the adsorbed Pt(IV), Fe³⁺, Cu²⁺, Ni²⁺, and Co²⁺ is observed under the optimum conditions. The proposed method can be used for the efficient adsorption and separation of palladium from the leaching liquor of ores.

Efficient removal of transition metal ions using poly(amidoxime) ligand from polymer grafted kenaf cellulose

A broad peak of the reflectance spectra at 700 nm was created when Cu(ii) ions (6 to 18 ppm) is adsorbed by ligand whereas blank polymeric ligand does not. Colour optimization of Cu(ii)-complex and HR-TEM micrograph are shown in figure inset.

Enhanced sorption of mercury from compact fluorescent bulbs and contaminated water streams using functionalized multiwalled carbon nanotubes

Three different functionalized multiwalled carbon nanotubes were prepared, namely, oxidized CNTs (CNT-OX), iodide incorporated MWCNT (CNT-I) and sulfur incorporated MWCNT (CNT-S). The as prepared adsorbents were structurally characterized by various spectral techniques like scanning electron microscopy (SEM), energy dispersive X-ray (EDAX), Brunauer, Emmett, and Teller (BET) surface area analyzer, Fourier transform infra red (FTIR) and Raman spectroscopy. Loading of iodide and sulfur was evident from the EDAX graphs. The adsorption properties of Hg(2+) as a function of pH, contact time and initial metal concentration were characterized by Cold vapor AAS. The adsorption kinetics fitted the Pseudo second order kinetics and equilibrium was reached within 90 min. The experimental data were modeled with Langmuir, Freundlich, Dubinin-Redushkevich and Temkin isotherms and various isotherm parameters were evaluated. It was found that the mercury adsorption capacity for the prepared adsorbents were in the order of CNT-S>CNT-I>CNT-OX>CNT. Studies have been conducted to demonstrate the applicability of the sorbent toward the removal of Hg(0) from broken compact fluorescent light (CFL) bulbs and Hg(II) from contaminated water streams.