Solubilization of single-wall carbon nanotubes by supramolecular encapsulation of helical amylose

Ultrastrong and Reusable Solar‒Thermal‒Electric Generators by Economical Starch Vitrimers

In frigid regions, it is imperative to possess functionality materials that are ultrastrong, reusable, and economical, providing self-generated heat and electricity. One promising solution is a solar‒thermal‒electric (STE) generator, composed of solar‒thermal conversion phase change composites (PCCs) and temperature-difference power-generation-sheets. However, the existing PCCs face challenges with conflicting requirements for solar‒thermal conversion efficiency and mechanical robustness, mainly due to monotonous functionalized aerogel framework. Herein, a novel starch vitrimer aerogel is proposed that incorporates orientational distributed carboxylated carbon nanotubes (CCNT) to create PCC. This innovative design integrates large through-holes, mechanical robustness, and superior solar‒thermal conversion. Remarkably, PCC with only 0.8 wt.% CCNT loading achieves 85.8 MPa compressive strength, 102.4 °C at 200 mW cm-2 irradiation with an impressive 92.9% solar-thermal conversion efficiency. Noteworthy, the STE generator assembled with PCC harvests 99.1 W m-2 output power density, surpassing other reported STE generators. Strikingly, even under harsh conditions of -10 °C and 10 mW cm‒2 irradiation, the STE generator maintains 20 °C for PCC with 325 mV output voltage and 45 mA current, showcasing enhanced electricity generation in colder environments. This study introduces a groundbreaking STE generator, paving the way for self-sufficient heat and electricity supply in cold regions.

High selectivity molecularly imprinted polymer based on short amylose as bio-based functional monomers for selective extraction of λ-cyhalothrin

Nowadays, the development of sustainable molecularly imprinted polymers (MIPs) with high selectivity is still challenging due to the limitations of bio-based functional monomers. In this study, the highly selective and porous MIPs (LC-TMIPs) were designed and prepared on short amylose (SAM) as bio-based functional monomers, λ-cyhalothrin (LC) as a template molecule, and tetrafluoroterephthalonitrile as a rigid crosslinking agent. Static, dynamic, and selective adsorption experiments were conducted to investigate the adsorption performance. The results indicated that, compared to MIPs prepared using epichlorohydrin as flexible crosslinking agents, LC-TMIPs exhibited higher imprinting factor (3.93), selectivity (5.78), and adsorption capacity (35.79 mg g-1), as well as faster adsorption/desorption kinetics. The LC-TMIPs were used as sorbents for the selective determination of LC in both apple and cucumber samples by high-performance liquid chromatography. Under the optimal extraction conditions, the recoveries of the method reached 92.1-106.1 %, with a linear range of 1.5-30 ng g-1 and a detection limit of 0.5 ng g-1. The proposed preparation method of LC-TMIPs is expected to open a new way to prepare highly selective and sustainable MIPs for hydrophobic compounds.

Immobilized nickel boride nanoparticles on magnetic functionalized multi-walled carbon nanotubes: a new nanocomposite for the efficient one-pot synthesis of 1,4-benzodiazepines

In this study, a new magnetic nanocomposite consisting of Ni2B nanoparticles anchored on magnetic functionalized multi-walled carbon nanotubes (Fe3O4/f-MWCNT/Ni2B) was synthesized and characterized using various techniques such as FT-IR, XRD, FESEM, SEM-based EDX, SEM-based elemental mapping, HRTEM, DLS, SAED, XPS, BET, TGA, and VSM. The as-prepared magnetic nanocomposite was successfully employed for the preparation of bioactive 1,4-benzodiazepines from the three-component reaction of o-phenylenediamine (1), dimedone (2), and different aldehydes (3), in polyethylene glycol 400 (PEG-400) as a solvent at 60 °C. The obtained results demonstrated that the current one-pot three-component protocol offers many advantages, such as good-to-excellent yields within acceptable reaction times, favorable TONs and TOFs, eco-friendliness of the procedure, easy preparation of the nanocomposite, mild reaction conditions, a broad range of products, excellent catalytic activity, green solvent, and reusability of the nanocomposite.

Approximate Corona Phase Hamiltonian for Individual Cylindrical Nanoparticle-Polymer Interactions

Nanoparticle surfaces, such as cylindrical nanowires and carbon nanotubes, are commonly coated with adsorbed polymer corona phases to impart solution stabilization and to control molecular interactions. These adsorbed polymer molecules (biological or otherwise), also known as the corona phase, are critical to engineering particle and molecular interactions. However, the prediction of its structure and the corresponding properties remains an unresolved problem in polymer physics. In this work, we construct a Hamiltonian describing the adsorption of an otherwise linear polymer to the surface of a cylindrical nanorod in the form of an integral equation summing up the energetic contributions corresponding to polymer bending, confinement, solvation, and electrostatics. We introduce an approximate functional that allows for the solution of the minimum energy configuration in the strongly bound limit. The functional is shown to predict the pitch and surface area of observed helical corona phases in the literature based on the surface binding energy and persistence length alone. This approximate functional also predicts and quantitatively describes the recently observed ionic strength-mediated phase transitions of charged polymer corona at carbon nanotube surfaces. The Hamiltonian and the approximate functional provide the first theoretical link between the polymer's mechanical and chemical properties and the resulting adsorbed phase configuration and therefore should find widespread utility in predicting corona phase structures around anisotropic nanoparticles.

Surfactant-Free Stabilization of Aqueous Graphene Dispersions Using Starch as a Dispersing Agent

Attention to graphene dispersions in water with the aid of natural polymers is increasing with improved awareness of sustainability. However, the function of biopolymers that can act as dispersing agents in graphene dispersions is not well understood. In particular, the use of starch to disperse pristine graphene materials deserves further investigation. Here, we report the processing conditions of aqueous graphene dispersions using unmodified starch. We have found that the graphene content of the starch-graphene dispersion is dependent on the starch fraction. The starch-graphene sheets are few-layer graphene with a lateral size of 3.2 μm. Furthermore, topographical images of these starch-graphene sheets confirm the adsorption of starch nanoparticles with a height around 5 nm on the graphene surface. The adsorbed starch nanoparticles are ascribed to extend the storage time of the starch-graphene dispersion up to 1 month compared to spontaneous aggregation in a nonstabilized graphene dispersion without starch. Moreover, the ability to retain water by starch is reduced in the presence of graphene, likely due to environmental changes in the hydroxyl groups responsible for starch-water interactions. These findings demonstrate that starch can disperse graphene with a low oxygen content in water. The aqueous starch-graphene dispersion provides tremendous opportunities for environmental-friendly packaging applications.

Helix-Sense-Selective Encapsulation of Helical Poly(lactic acid)s within a Helical Cavity of Syndiotactic Poly(methyl methacrylate) with Helicity Memory

We report a highly enantio- and helix-sense-selective encapsulation of helical poly(lactic acid)s (PLAs) through a unique "helix-in-helix" superstructure formation within the helical cavity of syndiotactic poly(methyl methacrylate) (st-PMMA) with a one-handed helicity memory, which enables the separation of the enantiomeric helices of the left (M)- and right (P)-handed-PLAs. The M- and P-helical PLAs with different molar masses and a narrow molar mass distribution were prepared by the ring-opening living polymerization of the optically pure l- and d-lactides, respectively, followed by end-capping of the terminal residues of the PLAs with a 4-halobenzoate and then a C₆₀ unit, giving the C₆₀-free and C₆₀-bound M- and P-PLAs. The C₆₀-free and C₆₀-bound M- and P-PLAs formed crystalline inclusion complexes with achiral st-PMMA accompanied by a preferred-handed helix induction in the st-PMMA backbone, thereby producing helix-in-helix superstructures with the same-handedness to each other. The induced helical st-PMMAs were retained after replacement with the achiral C₆₀, indicating the memory of the induced helicity of the st-PMMAs. Both the C₆₀-free and C₆₀-bound helical PLAs were enantio- and helix-sense selectively encapsulated into the helical hollow space of the optically active M- and P-st-PMMAs with the helicity memory prepared using chiral amines. The M- and P-PLAs are preferentially encapsulated within the M- and P-st-PMMA helical cavity with the same-handedness to each other, respectively, independent of the terminal units. The C₆₀-bound PLAs were more efficiently and enantioselectively trapped in the st-PMMA compared to the C₆₀-free PLAs. The enantioselectivities were highly dependent on the molar mass of the C₆₀-bound and C₆₀-free PLAs and significantly increased as the molar mass of the PLAs increased.

Synthesis of Bamboo-like Multiwall Carbon Nanotube-Poly(Acrylic Acid-co-Itaconic Acid)/NaOH Composite Hydrogel and its Potential Application for Electrochemical Detection of Cadmium(II)

A poly(acrylic acid-co-itaconic acid) (PAA-co-IA)/NaOH hydrogel containing bamboo-type multiwall carbon nanotubes (B-MWCNTs) doped with nitrogen (PAA-co-IA/NaOH/B-MWCNTs) was synthesized and characterized by SEM, absorption of water, point of zero charges, infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The possible use of the PAA-co-IA/NaOH/B-MWCNT hydrogel as an electrode modifier and pre-concentrator agent for Cd(II) sensing purposes was then evaluated using carbon paste electrodes via differential pulse voltammetry. The presence of the B-MWCNTs in the hydrogel matrix decreased its degree of swelling, stabilized the structure of the swollen gel, and favored the detection of 3 ppb Cd(II), which is comparable to the World Health Organization's allowable maximum value in drinking water. A calibration curve was obtained in the concentration range of 2.67 × 10^-8 to 6.23 × 10^-7 M (i.e., 3 and 70 ppb) to determine a limit of detection (LOD) of 19.24 μgL^-1 and a sensitivity of 0.15 μC ppb^-1. Also, the Zn(II), Hg(II), Pb(II) and Cu(II) ions interfered moderately on the determination of Cd(II).

Carbohydrate- and Chain Length-Controlled Complexation of Carbon Nanotubes by Glycopolymers

Stable dispersions of single-wall carbon nanotubes (SWCNTs) by biopolymers in an aqueous environment facilitate their potential biological and biomedical applications. In this report, we investigated a small library of precision synthesized glycopolymers with monosaccharide and disaccharide groups for stabilizing SWCNTs via noncovalent complexation in aqueous conditions. Among the glycopolymers tested, disaccharide lactose-containing glycopolymers demonstrate effective stabilization of SWCNTs in water, which strongly depends on carbohydrate density and polymer chain length as well. The introduction of disaccharide lactose potentially makes glycopolymers less flexible as compared to those containing monosaccharide and facilitates the wrapping conformation of polymers on the surface of SWCNTs while preserving intrinsic photoluminescence of nanotubes in the near-infrared region. This work demonstrates the synergistic effects of the identity of carbohydrate pendant groups and polymer chain length of glycopolymers on stabilizing SWCNTs in water, which has not been achieved previously.

Recent Advances in Carbon Nanotubes for Nervous Tissue Regeneration

Regenerative medicine has taken advantage of several nanomaterials for reparation of diseased or damaged tissues in the nervous system involved in memory, cognition, and movement. Electrical, thermal, mechanical, and biocompatibility aspects of carbon-based nanomaterials (nanotubes, graphene, fullerenes, and their derivatives) make them suitable candidates to drive nerve tissue repair and stimulation. This review article focuses on key recent advances on the use of carbon nanotube- (CNT-) based technologies on nerve tissue engineering, outlining how neurons interact with CNT interfaces for promoting neuronal differentiation, growth and network reconstruction. CNTs still represent strong candidates for use in therapies of neurodegenerative pathologies and spinal cord injuries.

Chain conformation transition induced host–guest assembly between triple helical curdlan and β-CD for drug delivery

A novel kind of supramolecular micelle consisting of the triplex curdlan and β-CDs was firstly developed via the conformation transition induced host–guest interaction.

Amylose-grafted Curdlan: A New Class of Semi-artificial Branched Polysaccharides for Hierarchical Polymeric Superstructures Created by the Action of "Orthogonal" Binding Sites

The semi-artificial branched-polysaccharides, amylose-grafted curdlans, were synthesized utilizing an enzymatic polymerization. Both a curdlan main chain and amylose side chains on the polysaccharides maintain the original helical structure as well as the molecular binding ability. Thanks to the difference in their molecular recognition properties between β-1,3-glucan chain and α-1,4-glucan chain, the amylose-grafted curdlans can provide two different orthogonal binding sites within one polymeric system. When a water-soluble polythiophene was mixed with the amylose-grafted curdlan, the polythiophene was twisted in two different modes and therein, fluorescence energy of the polythiophene wrapped by the amylose side chains was successfully transferred to the polythiophene wrapped by the curdlan main chain. We thus concluded that in the dendritic superstructure of this polysaccharide, a self-organized "Janus-type FRET system" was successfully constructed.

CH/π Interactions in Carbohydrate Recognition

Many carbohydrate-binding proteins contain aromatic amino acid residues in their binding sites. These residues interact with carbohydrates in a stacking geometry via CH/π interactions. These interactions can be found in carbohydrate-binding proteins, including lectins, enzymes and carbohydrate transporters. Besides this, many non-protein aromatic molecules (natural as well as artificial) can bind saccharides using these interactions. Recent computational and experimental studies have shown that carbohydrate–aromatic CH/π interactions are dispersion interactions, tuned by electrostatics and partially stabilized by a hydrophobic effect in solvated systems.

"Helix-in-Helix" Superstructure Formation through Encapsulation of Fullerene-Bound Helical Peptides within a Helical Poly(methyl methacrylate) Cavity

A one-handed 310 -helical hexapeptide is efficiently encapsulated within the helical cavity of st-PMMA when a fullerene (C60 ) derivative is introduced at the C-terminal end of the peptide. The encapsulation is accompanied by induction of a preferred-handed helical conformation in the st-PMMA backbone with the same-handedness as that of the hexapeptide to form a crystalline st-PMMA/peptide-C60 inclusion complex with a unique optically active helix-in-helix structure. Although the st-PMMA is unable to encapsulate the 310 -helical peptide without the terminal C60 unit, the helical hollow space of the st-PMMA is almost filled by the C60 -bound peptides. This result suggests that the C60 moiety can serve as a versatile molecular carrier of specific molecules and polymers in the helical cavity of the st-PMMA for the formation of an inclusion complex, thus producing unique supramolecular soft materials that cannot be prepared by other methods.

Sequential molecule-triggered-release system based on acetylated amylose helix aggregates

We developed a molecule-triggered-release system based on acetylated amylose helix aggregates, in which the triggered conditions and duration time can be adjusted. The system could even be customized to meet specific demands.

Hydrophilic Modification of Multi-Walled Carbon Nanotube for Building Photonic Crystals with Enhanced Color Visibility and Mechanical Strength

Low color visibility and poor mechanical strength of polystyrene (PS) photonic crystal films have been the main shortcomings for the potential applications in paints or displays. This paper presents a simple method to fabricate PS/MWCNTs (multi-walled carbon nanotubes) composite photonic crystal films with enhanced color visibility and mechanical strength. First, MWCNTs was modified through radical addition reaction by aniline 2,5-double sulfonic acid diazonium salt to generate hydrophilic surface and good water dispersity. Then the MWCNTs dispersion was blended with PS emulsion to form homogeneous PS/MWCNTs emulsion mixtures and fabricate composite films through thermal-assisted method. The obtained films exhibit high color visibility under natural light and improved mechanical strength owing to the light-adsorption property and crosslinking effect of MWCNTs. The utilization of MWCNTs in improving the properties of photonic crystals is significant for various applications, such as in paints and displays.

One-Step Preparation of Oxygen/Fluorine Dual Functional MWCNTs with Good Water Dispersibility by the Initiation of Fluorine Gas

It is still a challenge to prepare water-dispersible carbon nanotubes which are proved to have great potential in numerous applications. In this present work, as low as 2% fluorine gas was used as initiator to prepare oxygen/fluorine dual functional MWCNTs (OF-MWCNTs) with good water dispersibility through a one-step method under oxygen atmosphere. The aromatic structure of OF-MWCNTs is reserved to some extent resulting in better electrical conductivity than pure fluorinated MWCNTs (F-MWCNTs). The amount of oxygen atoms and fluorine atoms (hereinafter referred to as "O-content" and "F-content") of OF-MWCNTs is up to 8.8% and 7.5%. Fourier transform infrared spectroscopy (FTIR) manifests that - COOH is covalently bonded onto the surface of OF-MWCNTs. In addition, the OF-MWCNTs sample is pH-sensitive, which further validates the successful introduction of -COOH. The successful covalent attachment of -COOH onto MWCNTs dramatically improves the hydrophilia of MWCNTs which always present hydrophobic character. It is deduced that fluorine creates reactive sites for oxygen, increases the oxygen content, and eventually results in the dispersibility of OF-MWCNTs in water. The corresponding hydrophilic OF-MWCNTs film shows good performance for separating oil-in-water emulsions. Meanwhile, the good dispersibility of OF-MWCNTs in organic solvents also makes it possible to be applied in various composites.

Nanocomposites with both structural and porous hierarchy synthesized from Pickering emulsions

Templating polycondensation of furfural and phloroglucinol by O/W emulsions stabilized by CNT-carboxymethylcellulose composite particles allowed preparing conductive and magnetic microcapsules.

Sugar-functionalized triptycenes used for dispersion of single-walled carbon nanotubes in aqueous solution by supramolecular interaction

Two water-soluble sugar-functionalized triptycene derivatives were synthesized and used for dispersion of SWCNTs in aqueous solution via supramolecular interaction.

Carbohydrates in Supramolecular Chemistry

Carbohydrates are involved in a variety of biological processes. The ability of sugars to form a large number of hydrogen bonds has made them important components for supramolecular chemistry. We discuss recent advances in the use of carbohydrates in supramolecular chemistry and reveal that carbohydrates are useful building blocks for the stabilization of complex architectures. Systems are presented according to the scaffold that supports the glyco-conjugate: organic macrocycles, dendrimers, nanomaterials, and polymers are considered. Glyco-conjugates can form host-guest complexes, and can self-assemble by using carbohydrate-carbohydrate interactions and other weak interactions such as π-π interactions. Finally, complex supramolecular architectures based on carbohydrate-protein interactions are discussed.

Flexible Infrared Responsive Multi-Walled Carbon Nanotube/Form-Stable Phase Change Material Nanocomposites

Flexible infrared (IR)-responsive materials, such as polymer nanocomposites, that exhibit high levels of IR responses and short response times are highly desirable for various IR sensing applications. However, the IR-induced photoresponses of carbon nanotube (CNT)/polymer nanocomposites are typically limited to 25%. Herein, we report on a family of unique nanocomposite films consisting of multi-walled carbon nanotubes (MWCNTs) uniformly distributed in a form-stable phase change material (PCM) that exhibited rapid, dramatic, reversible, and cyclic IR-regulated responses in air. The 3 wt % MWCNT/PCM nanocomposite films demonstrated cyclic, IR-regulated on/off electrical conductivity ratios of 11.6 ± 0.6 and 570.0 ± 70.5 times at IR powers of 7.3 and 23.6 mW/mm(2), respectively. The excellent performances exhibited by the MWCNT/PCM nanocomposite films were largely attributed to the IR-regulated cyclic and reversible form-stable phase transitions occurring in the PCM matrix due to MWCNT's excellent photoabsorption and thermal conversion capabilities, which subsequently affected the thickness of the interfacial PCM between adjacent conductive MWCNTs and thus the electron tunneling efficiency between the MWCNTs. Our findings suggest that these unique MWCNT/PCM nanocomposites offer promising new options for high-performance and flexible optoelectronic devices, including thermal imaging, IR sensing, and optical communication.

Carbon nanotubes part I: preparation of a novel and versatile drug-delivery vehicle

INTRODUCTION

It is 23 years since carbon allotrope known as carbon nanotubes (CNT) was discovered by Iijima, who described them as "rolled graphite sheets inserted into each other". Since then, CNTs have been studied in nanoelectronic devices. However, CNTs also possess the versatility to act as drug- and gene-delivery vehicles.

AREAS COVERED

This review covers the synthesis, purification and functionalization of CNTs. Arc discharge, laser ablation and chemical vapor deposition are the principle synthesis methods. Non-covalent functionalization relies on attachment of biomolecules by coating the CNT with surfactants, synthetic polymers and biopolymers. Covalent functionalization often involves the initial introduction of carboxylic acids or amine groups, diazonium addition, 1,3-dipolar cycloaddition or reductive alkylation. The aim is to produce functional groups to attach the active cargo.

EXPERT OPINION

In this review, the feasibility of CNT being used as a drug-delivery vehicle is explored. The molecular composition of CNT is extremely hydrophobic and highly aggregation-prone. Therefore, most of the efforts towards drug delivery has centered on chemical functionalization, which is usually divided in two categories; non-covalent and covalent. The biomedical applications of CNT are growing apace, and new drug-delivery technologies play a major role in these efforts.

Non-covalent polymer wrapping of carbon nanotubes and the role of wrapped polymers as functional dispersants

Carbon nanotubes (CNTs) have been recognized as a promising material in a wide range of applications from biotechnology to energy-related devices. However, the poor solubility in aqueous and organic solvents hindered the applications of CNTs. As studies have progressed, the methodology for CNT dispersion was established. In this methodology, the key issue is to covalently or non-covalently functionalize the surfaces of the CNTs with a dispersant. Among the various types of dispersions, polymer wrapping through non-covalent interactions is attractive in terms of the stability and homogeneity of the functionalization. Recently, by taking advantage of their stability, the wrapped-polymers have been utilized to support and/or reinforce the unique functionality of the CNTs, leading to the development of high-performance devices. In this review, various polymer wrapping approaches, together with the applications of the polymer-wrapped CNTs, are summarized.

Why do the structural properties of complexes formed by glucans and carbon nanotubes differ so much?

Effect of glycosidic bond linkage on the structural properties of complexes formed by glucans and carbon nanotubes.

Selective assembly of DNA-conjugated single-walled carbon nanotubes from the vascular secretome

Colloidal dispersion of single-walled carbon nanotubes (SWCNTs) is often the first processing step to many of their unique applications. However, dispersed SWCNTs often exist in kinetically trapped states where aggregation can be of concern. Recent work revealed prominent DNA-SWCNT aggregation following intravascular injection. In this study, we performed detailed analysis of DNA-SWCNT aggregate formation, structure, and composition in the context of endothelial cell condition media. Interestingly, we found that aggregates formed within condition media from cells that have undergone a stress response differ in size and organization from that of the control. We also found that temperature increases also promote DNA-SWCNT associations. A mathematical model was developed to describe the kinetics of SWCNT extraction from solution. Through orthogonal optical analysis and imaging modalities, we verified that proteins form the bulk of the aggregate structure and dictate aggregate assembly at multiple levels of organization. Finally, physiochemical analysis indicated preferential extraction of low-abundance hydrophobic and charged proteins. The formed aggregates also remain relatively stable in solution, making them potential macroscopic indicators of solution content.

Iron-oxide-supported nanocarbon in lithium-ion batteries, medical, catalytic, and environmental applications

Owing to the three different orbital hybridizations carbon can adopt, the existence of various carbon nanoallotropes differing also in dimensionality has been already affirmed with other structures predicted and expected to emerge in the future. Despite numerous unique features and applications of 2D graphene, 1D carbon nanotubes, or 0D fullerenes, nanodiamonds, and carbon quantum dots, which have been already heavily explored, any of the existing carbon allotropes do not offer competitive magnetic properties. For challenging applications, carbon nanoallotropes are functionalized with magnetic species, especially of iron oxide nature, due to their interesting magnetic properties (superparamagnetism and strong magnetic response under external magnetic fields), easy availability, biocompatibility, and low cost. In addition, combination of iron oxides (magnetite, maghemite, hematite) and carbon nanostructures brings enhanced electrochemical performance and (photo)catalytic capability due to synergetic and cooperative effects. This work aims at reviewing these advanced applications of iron-oxide-supported nanocarbon composites where iron oxides play a diverse role. Various architectures of carbon/iron oxide nanocomposites, their synthetic procedures, physicochemical properties, and applications are discussed in details. A special attention is devoted to hybrids of carbon nanotubes and rare forms (mesoporous carbon, nanofoam) with magnetic iron oxide carriers for advanced environmental technologies. The review also covers the huge application potential of graphene/iron oxide nanocomposites in the field of energy storage, biomedicine, and remediation of environment. Among various discussed medical applications, magnetic composites of zero-dimensional fullerenes and carbon dots are emphasized as promising candidates for complex theranostics and dual magneto-fluorescence imaging.

General synthesis of noble metal (Au, Ag, Pd, Pt) nanocrystal modified MoS2 nanosheets and the enhanced catalytic activity of Pd-MoS2 for methanol oxidation

A general and facile method for water-dispersed noble metal (Au, Ag, Pd, Pt) nanocrystal modified MoS2 nanosheets (NM-MoS2 NSs) has been developed. By using sodium carboxymethyl cellulose as a stabilizer, well-dispersed NM-MoS2 NSs with homogeneously deposited noble metal nanocrystals (NM NCs) can be synthesized in aqueous solutions. Due to the transition from the semiconducting 2H phase to the metallic 1T phase, the chemically exfoliated MoS2 (ce-MoS2) NSs have improved electrochemical activity. The partially metallic nature of the ce-MoS2 NSs and the catalytic activity of the NM NCs synergistically make NM-MoS2 NSs a potential electrochemical catalyst. For the first time, Pd-MoS2 NSs were used as an electrocatalyst for methanol oxidation in alkaline media. The results showed that Pd-MoS2 NSs have enhanced catalytic activity with 2.8-fold anodic peak current mass density compared to a commercial Pd/C catalyst, suggesting potential for application in direct methanol fuel cells (DMFCs).

Supracolloidal multivalent interactions and wrapping of dendronized glycopolymers on native cellulose nanocrystals

Cellulose nanocrystals (CNCs) are high aspect ratio colloidal rods with nanoscale dimensions, attracting considerable interest recently due to their high mechanical properties, chirality, sustainability, and availability. In order to exploit them for advanced functions in new materials, novel supracolloidal concepts are needed to manipulate their self-assemblies. We report on exploring multivalent interactions to CNC surface and show that dendronized polymers (DenPols) with maltose-based sugar groups on the periphery of lysine dendrons and poly(ethylene-alt-maleimide) polymer backbone interact with CNCs. The interactions can be manipulated by the dendron generation suggesting multivalent interactions. The complexation of the third generation DenPol (G3) with CNCs allows aqueous colloidal stability and shows wrapping around CNCs, as directly visualized by cryo high-resolution transmission electron microscopy and electron tomography. More generally, as the dimensions of G3 are in the colloidal range due to their ~6 nm lateral size and mesoscale length, the concept also suggests supracolloidal multivalent interactions between other colloidal objects mediated by sugar-functionalized dendrons giving rise to novel colloidal level assemblies.