Assemblage of signaling DNA enzymes with intriguing metal-ion specificities and pH dependences

In-vitro Clinical Diagnostics using RNA-Cleaving DNAzymes

Over the last three decades, significant advancements have been made in the development of biosensors and bioassays that use RNA-cleaving DNAzymes (RCDs) as molecular recognition elements. While early examples of RCDs were primarily responsive to metal ions, the past decade has seen numerous RCDs reported for more clinically relevant targets such as bacteria, cancer cells, small metabolites, and protein biomarkers. Over the past 5 years several RCD-based biosensors have also been evaluated using either spiked biological matrixes or patient samples, including blood, serum, saliva, nasal mucus, sputum, urine, and faeces, which is a critical step toward regulatory approval and commercialization of such sensors. In this review, an overview of the methods used to generate RCDs and the properties of key RCDs that have been utilized for in vitro testing is first provided. Examples of RCD-based assays and sensors that have been used to test either spiked biological samples or patient samples are then presented, highlighting assay performance in different biological matrixes. A summary of current prospects and challenges for development of in vitro diagnostic tests incorporating RCDs and an overview of future directions of the field is also provided.

A DNAzymes-in-droplets assay for Burkholderia gladioli pathovar cocovenenans with single-bacterium sensitivity

Foodborne pathogens pose a serious risk to human health, and the simple and rapid detection of such bacteria in complex food matrices remains challenging. Herein, we present the selection and characterization of a novel RNA-cleaving fluorogenic DNAzyme, named RFD-BC1, with exceptional specificity for Burkholderia gladioli pv. cocovenenans (B. cocovenenans), a pathogen strongly associated with fatal food poisoning cases. RFD-BC1 was activated by a protein secreted specifically by whole viable B. cocovenenans and displayed an optimum pH distinct from the selection pH, with a rate constant of approximately 0.01 min-1 at pH 5.0. Leveraging this newly discovered DNAzyme, we developed a novel system, termed DNAzymes-in-droplets (DID), that integrates droplet microfluidics to achieve the rapid and selective detection of live B. cocovenenans with single-cell sensitivity. We believe that the approach described herein holds promise for combating specific bacterial pathogens in food samples, offering significant potential for broader applications in food safety and public health.

In Vitro Selection of M2+-Independent, Fast-Responding Acidic Deoxyribozymes for Bacterial Detection

We report on the first efforts to isolate acidic RNA-cleaving DNAzymes (aRCDs) from a random-sequence DNA pool by in vitro selection that are activated by a microbe Escherichia coli (E. coli), at pH 5.3. Importantly, these E. coli-responsive aRCDs only require monovalent metal ions as cofactors for cleaving a fluorogenic chimeric DNA/RNA substrate. Such characteristics can be used to efficiently protect RCDs from both intrinsic chemical instability and external enzymatic degradation. One remarkable DNAzyme, aRCD-EC1, is specific for E. coli, and its target is likely a protein. Furthermore, truncated aRCD-EC1 had significantly improved catalytic activity with an observed rate constant (kobs) of 1.18 min-1, making it the fastest bacteria-responding RCD reported to date. Clinical evaluation of this aRCD-based fluorescent assay using 40 patient urine samples demonstrated a diagnostic sensitivity of 100% and a specificity of 100% at a total analysis time of 50 min without a bacterial culture. This work can expand the repertoire of DNAzymes that are active under nonphysiological conditions, thus facilitating the development of diverse DNAzyme-based biosensors in clinical diagnosis.

CRISPR-Cas12a based fluorescence assay for organophosphorus pesticides in agricultural products

Herein, we propose a sensitive fluorescent assay for organophosphorus pesticides (OPs) detection based on a novel strategy of activating the CRISPR-Cas12a system. Specifically, acetylcholinesterase (AChE) hydrolyzes acetylthiocholine into thiocholine (TCh). Subsequently, TCh induces the degradation of MnO₂ nanosheets and generates sufficient Mn²⁺ ions to activate the Mn²⁺-dependent DNAzyme. Then, as the catalytic product of activated DNAzyme, the short DNA strand activates the CRISPR-Cas12a system to cleave the fluorophore-quencher-labeled DNA reporter (FQ) probe effectively; thus, increasing the fluorescence intensity (FI) in the solution. However, in the presence of OPs, the activity of AChE is suppressed, resulting in a decrease in FI. Under optimized conditions, the limits of detection for paraoxon, dichlorvos, and demeton were 270, 406, and 218 pg/mL, respectively. Benefiting from the outstanding MnO₂ nanosheets properties and three rounds of enzymatic signal amplification, the proposed fluorescence assay holds great potential for the detection of OPs in agricultural products.

An RNA-cleaving threose nucleic acid enzyme capable of single point mutation discrimination

Threose nucleic acid has been considered a potential evolutionary progenitor of RNA because of its chemical simplicity, base pairing properties and capacity for higher-order functions such as folding and specific ligand binding. Here we report the in vitro selection of RNA-cleaving threose nucleic acid enzymes. One such enzyme, Tz1, catalyses a site-specific RNA-cleavage reaction with an observed pseudo first-order rate constant (k_obs) of 0.016 min^-1. The catalytic activity of Tz1 is maximal at 8 mM Mg²⁺ and remains relatively constant from pH 5.3 to 9.0. Tz1 preferentially cleaves a mutant epidermal growth factor receptor RNA substrate with a single point substitution, while leaving the wild-type intact. We demonstrate that Tz1 mediates selective gene silencing of the mutant epidermal growth factor receptor in eukaryotic cells. The identification of catalytic threose nucleic acids provides further experimental support for threose nucleic acid as an ancestral genetic and functional material. The demonstration of Tz1 mediating selective knockdown of intracellular RNA suggests that functional threose nucleic acids could be developed for future biomedical applications.

Zn2+-dependent DNAzymes that cleave all combinations of ribonucleotides

Although several DNAzymes are known, their utility is limited by a narrow range of substrate specificity. Here, we report the isolation of two zinc-dependent DNAzymes, ZincDz1 and ZincDz2, which exhibit compact catalytic core sequences with highly versatile hydrolysis activity. They were selected through in vitro selection followed by deep sequencing analysis. Despite their sequence similarity, each DNAzyme showed different Zn²⁺-concentration and pH-dependent reaction profiles, and cleaved the target RNA sequences at different sites. Using various substrate RNA sequences, we found that the cleavage sequence specificity of ZincDz2 and its highly active mutant ZincDz2-v2 to be 5'-rN↓rNrPu-3'. Furthermore, we demonstrated that the designed ZincDz2 could cut microRNA miR-155 at three different sites. These DNAzymes could be useful in a broad range of applications in the fields of medicine and biotechnology.

Environmental and intercellular Pb2+ ions determination based on encapsulated DNAzyme in nanoscale metal-organic frameworks

With the merits of low cost, simple synthesis procedure, and high affinity for metal ions, deoxyribozyme (DNAzyme) have played important roles in metal ions detection. However, the intracellular applications of DNAzyme are limited because of enzymatic degradation and inefficient cellular uptake. To address these problems, GR-5 as model DNAzyme was encapsulated into zeolitic imidazolate frameworks-8 (ZIF-8) nanoparticles by biomimetic mineralization. The positively charged ZIF-8 with high DNAzyme loading capacity retained their ability to enter cells. Compared with free DNAzyme, the biomimetic mineralization synthesis method has greatly improved the stability of pristine DNAzyme. The as-synthesized DNAzyme@ZIF-8 composite exhibited good stability resisting DNase I, and was used as a sensitive fluorescent nanoprobe for Pb²⁺ determination and successfully achieved selective and sensitive determination for Pb²⁺ at λ_ex/λ_em = 494/522 nm in real samples. The linear range for the determination of Pb²⁺ is 50 to 500 nM. Moreover, the highly active DNAzyme delivered by ZIF-8 allows noninvasive imaging of Pb²⁺ measurement in living cells. This strategy will extend the suitability of functional nucleic acids for in vitro and in vivo bioanalysis and bioimaging. Graphical abstract.

In vitro Selection of Chemically Modified DNAzymes

DNAzymes are in vitro selected DNA oligonucleotides with catalytic activities. RNA cleavage is one of the most extensively studied DNAzyme reactions. To expand the chemical functionality of DNA, various chemical modifications have been made during and after selection. In this review, we summarize examples of RNA-cleaving DNAzymes and focus on those modifications introduced during in vitro selection. By incorporating various modified nucleotides via polymerase chain reaction (PCR) or primer extension, a few DNAzymes were obtained that can be specifically activated by metal ions such as Zn2+ and Hg2+. In addition, some modifications were introduced to mimic RNase A that can cleave RNA substrates in the absence of divalent metal ions. In addition, single modifications at the fixed regions of DNA libraries, especially at the cleavage junctions, have been tested, and examples of DNAzymes with phosphorothioate and histidine-glycine modified tertiary amine were successfully obtained specific for Cu2+, Cd2+, Zn2+, and Ni2+. Labeling fluorophore/quencher pair right next to the cleavage junction was also used to obtain signaling DNAzymes for detecting various metal ions and cells. Furthermore, we reviewed work on the cleavage of 2'-5' linked RNA and L-RNA substrates. Finally, applications of these modified DNAzymes as biosensors, RNases, and biochemical probes are briefly described with a few future research opportunities outlined at the end.

Selection of a metal ligand modified DNAzyme for detecting Ni2

Nickel is a highly important metal, and the detection of Ni²⁺ using biosensors is a long-stand analytical challenge. DNA has been widely used for metal detection, although no DNA-based sensors were reported for Ni²⁺. DNAzymes are DNA-based catalysts, and they recruit metal ions for catalysis. In this work, in vitro selection of RNA-cleaving DNAzymes was carried out using a library containing a region of 50 random nucleotides in the presence of Ni²⁺. To increase Ni²⁺ binding, a glycyl-histidine-functionalized tertiary amine moiety was inserted at the cleavage junction. A representative DNAzyme named Ni03 showed a high cleavage yield with Ni²⁺ and it was further studied. After truncation, the optimal sequence of Ni03l could bind one Ni²⁺ or two Co²⁺ for catalysis, while other metal ions were inactive. Its cleavage rates for 100 μM Ni²⁺ reached 0.63 h^-1 at pH 8.0. A catalytic beacon biosensor was designed by labeling a fluorophore and a quencher on the Ni03l DNAzyme. Fluorescence enhancement was observed in the presence of Ni²⁺ with a detection limit of 12.9 μM. The sensor was also tested in spiked Lake Ontario water achieving a similar sensitivity. This is another example of using single-site modified DNAzyme for sensing transition metal ions.

Nucleic acid-cleaving catalytic DNA for sensing and therapeutics

DNAzymes with nucleic acid-cleaving catalytic activity are increasing in versatility through concerted efforts to discover new sequences with unique functions, and they are generating excitement in the sensing community as cheap, stable, amplifiable detection elements. This review provides a comprehensive list and detailed descriptions of the DNAzymes identified to date, classified by their associated small molecule or ion needed for catalysis; of note, this classification clarifies conserved regions of various DNAzymes that are not obvious in the literature. Furthermore, we detail the breadth of functionality of these DNA sequences as well as the range of reaction conditions under which they are useful. In addition, the utility of the DNAzymes in a variety of sensing and therapeutic applications is presented, detailing both their advantages and disadvantages.

Sensitivity of a classic DNAzyme for Pb2+ modulated by cations, anions and buffers

Both cations and anions in salt strongly affect the activity of a classic Pb²⁺ specific DNAzyme, which in turn can affect the sensitivity of related biosensors.

Molecular dynamics simulations of alkaline earth metal ions binding to DNA reveal ion size and hydration effects

Classical molecular dynamics simulations reveal size-dependent trends of alkaline earth metal ions binding to DNA are due to ion size and hydration behavior.

DNAzymes as Activity-Based Sensors for Metal Ions: Recent Applications, Demonstrated Advantages, Current Challenges, and Future Directions

Metal ions can be beneficial or toxic depending on their identity, oxidation state, and concentration. Therefore, the ability to detect and quantify different types of metal ions using portable sensors or in situ imaging agents is important for better environmental monitoring, in vitro medical diagnostics, and imaging of biological systems. While numerous metal ions in different oxidation states are present in the environment and biological systems, only a limited number of them can be detected effectively using current methods. In this Account, we summarize research results from our group that overcome this limitation by the development of a novel class of activity-based sensors based on metal-dependent DNAzymes, which are DNA molecules with enzymatic activity. First, we have developed an in vitro selection method to obtain DNAzymes from a large DNA library of up to 1015 sequences that can carry out cleavage of an oligonucleotide substrate only in the presence of a specific metal ion with high selectivity. Negative selection steps can further be used to improve the selectivity against potentially competing targets by removing sequences that recognize the competing metal ions. Second, we have developed a patented catalytic beacon method to transform the metal-dependent DNAzyme cleavage reaction into a turn-on fluorescent signal by attaching a fluorophore and quenchers to the DNAzyme complex. Because of the difference in the melting temperatures of DNA hybridization before and after metal-ion-dependent cleavage of the DNAzyme substrate, the fluorophore on the DNA cleavage product can be released from its quenchers to create a turn-on fluorescent signal. Because DNAzymes are easy to conjugate with other signaling moieties, such as gold nanoparticles, lanthanide-doped upconversion nanoparticles, electrochemical agents, and gadolinium complexes, these DNAzymes can also readily be converted into colorimetric sensors, upconversion luminescence sensors, electrochemical sensors, or magnetic resonance contrast agents. In addition to describing recent progress in developing and applying these metal ion sensors for environmental monitoring, point-of-care diagnostics, cellular imaging, and in vivo imaging in zebrafish, we summarize major advantages of this class of activity-based sensors. In addition to advantages common to most activity-based sensors, such as enzymatic turnovers that allow for signal amplification and the use of initial rates instead of absolute signals for quantification to avoid interferences from sample matrices, the DNAzyme-based sensors allow for in vitro selection to expand the method to almost any metal ion under a variety of conditions, negative selection to improve the selectivity against competing targets, and reselection of DNAzymes and combination of active and inactive variants to fine-tune the dynamic range of detection. The use of melting temperature differences to separate target binding from signaling moieties in the catalytic beacon method allows the use of different fluorophores and nanomaterials to extend the versatility and modularity of this sensing platform. Furthermore, sensing and imaging artifacts can be minimized by using an inactive mutant DNAzyme as a negative control, while spatiotemporal control of sensing/imaging can be achieved using optical, photothermal, and endogenous orthogonal caging methods. Finally, current challenges, opportunities, and future perspectives for DNAzymes as activity-based sensors are also discussed.

Reselection Yielding a Smaller and More Active Silver-Specific DNAzyme

Ag10c is a recently reported RNA-cleaving DNAzyme obtained from in vitro selection. Its cleavage activity selectively requires Ag⁺ ions, and thus it has been used as a sensor for Ag⁺ detection. However, the previous selection yielded very limited information regarding its sequence requirement, since only ∼0.1% of the population in the final library were related to Ag10c and most other sequences were inactive. In this work, we performed a reselection by randomizing the 19 important nucleotides in Ag10c in such a way that a purine has an equal chance of being A or G, whereas a pyrimidine has an equal chance of being T or C. The round 3 library of the reselection was carefully analyzed and a statistic understanding of the relative importance of each nucleotide was obtained. At the same time, a more active mutant was identified, containing two mutated nucleotides. Further analysis indicated new base pairs leading to an enzyme with smaller catalytic loops but with ∼200% activity of the original Ag10c, and also excellent selectivity for Ag⁺. Therefore, a more active mutant of Ag10c was obtained and further truncations were successfully performed, which might be better candidates for developing new biosensors for silver. A deeper biochemical understanding was also obtained using this reselection method.

Nucleic acids: function and potential for abiogenesis

The emergence of functional cooperation between the three main classes of biomolecules - nucleic acids, peptides and lipids - defines life at the molecular level. However, how such mutually interdependent molecular systems emerged from prebiotic chemistry remains a mystery. A key hypothesis, formulated by Crick, Orgel and Woese over 40 year ago, posits that early life must have been simpler. Specifically, it proposed that an early primordial biology lacked proteins and DNA but instead relied on RNA as the key biopolymer responsible not just for genetic information storage and propagation, but also for catalysis, i.e. metabolism. Indeed, there is compelling evidence for such an 'RNA world', notably in the structure of the ribosome as a likely molecular fossil from that time. Nevertheless, one might justifiably ask whether RNA alone would be up to the task. From a purely chemical perspective, RNA is a molecule of rather uniform composition with all four bases comprising organic heterocycles of similar size and comparable polarity and pK a values. Thus, RNA molecules cover a much narrower range of steric, electronic and physicochemical properties than, e.g. the 20 amino acid side-chains of proteins. Herein we will examine the functional potential of RNA (and other nucleic acids) with respect to self-replication, catalysis and assembly into simple protocellular entities.

Serendipitous Discovery of a Guanine-rich DNA Molecule with a Highly Stable Structure in Urea

We have made an accidental discovery of an unusual, single-stranded, guanine-rich DNA molecule that is capable of adopting a folded structure in 7 M urea (7MU) known to denature nucleic acid structures. The folding of this molecule requires Na⁺ and Mg²⁺ and the folded structure remains stable when subjected to denaturing (7MU) polyacrylamide gel electrophoresis. Results from sequence mutagenesis, DNA methylation, and circular dichroism spectroscopy studies suggest that this molecule adopts an intramolecular guanine-quadruplex structure with 5 layers of guanine tetrads. Our finding indicates that DNA has the ability to create extremely stable structural folds despite its limited chemical repertoire, making it possible to develop DNA-based systems for unconventional applications.

Multi-metal-dependent nucleic acid enzymes

Nucleic acid enzymes require metal ions for activity, and many recently discovered enzymes can use multiple metals, either binding to the scissile phosphate or also playing an allosteric role.

Discovery and Biosensing Applications of Diverse RNA-Cleaving DNAzymes

DNA-based enzymes, or DNAzymes, are not known to exist in Nature but can be isolated from random-sequence DNA pools using test tube selection techniques. Since the report of the first DNAzyme in 1994, many catalytic DNA molecules for catalyzing wide-ranging chemical transformations have been isolated and studied. Our laboratory has a keen interest in searching for diverse DNAzymes capable of cleaving RNA-containing substrates, determining their sequence requirements and structural properties, and examining their potential as biosensors. This Account begins with the description of an accidental discovery on the sequence adaptability of a small DNAzyme known as "8-17", when we performed 16 parallel selections to search for DNAzymes that targeted each and every possible dinucleotide junction of RNA for cleavage. DNAzyme 8-17 dominated all the selection pools targeting purine-containing junctions. In-depth sequence analysis revealed that 8-17 could manifest itself in many sequence options defined by the requirement of four absolutely conserved nucleotides. This study also exposed the fact that 8-17 had poor activity toward pyrimidine-pyrimidine junctions. With this information in hand, we proceeded to the discovery of diverse non-8-17 DNAzymes that exhibited robust catalytic activity under physiological conditions. These DNAzymes were found to universally interact with their substrates through two Watson-Crick binding arms and have a catalytic core of varying length and secondary-structure complexity. RNA-cleaving DNAzymes were also isolated to function at acidic conditions (pH 3-5), and these molecules exhibited intriguing pH profiles, with the highest activity precisely matching the pH used for their selection. Interestingly, these DNAzymes appear to use non-Watson-Crick interactions in defining their structures. More recently, we have embarked on the development of ligand-responsive RNA-cleaving fluorogenic DNAzymes that can recognize specific bacterial pathogens, such as Escherichia coli and Clostridium difficile, using a method that does not require a priori identification of a specific biomarker. Instead, the crude extracellular mixture as a whole is used as the target to drive the DNAzyme isolation. High recognition specificity can be achieved with a double-selection approach in which a DNA library is negatively selected against the cellular mixture prepared from unintended bacteria, followed by positive selection against the same mixture derived from a specific species or strain of bacterial pathogen. Finally, we have shown that DNAzymes' compatibility with DNA replication can benefit the design of amplification mechanisms that uniquely link the action of RNA-cleaving DNAzymes to rolling circle amplification, an isothermal DNA amplification technique. These methods are well suited for translating the target-binding and cleavage activity of an analyte-activated RNA-cleaving DNAzyme into the production of massive amounts of DNA amplicons to achieve ultrahigh detection sensitivity. Given the high chemical stability of DNA, our ability to discover catalytic DNA sequences by simultaneously evaluating as many as 10¹⁶ different DNA sequences, the accessibility to diverse RNA-cleaving DNAzymes in a single DNA pool, and the availability of methods for designing simple biosensors that incorporate RNA-cleaving DNAzymes, we believe we are moving closer to employing RNA-cleaving DNAzymes for exciting applications, such as point of care diagnostics or field detection of environmental toxins.

Kinetic Discrimination of Metal Ions Using DNA for Highly Sensitive and Selective Cr3+ Detection

Most metal sensors are designed for a strong binding affinity toward target metal ions, and the underlying principle relies on binding thermodynamics. The kinetic aspect of binding, however, was rarely explored for sensing. In this work, the binding kinetics of 19 common or toxic metal ions are compared based on a fluorescence quenching assay using DNA oligonucleotides as ligands. Among these metals, Cr³⁺ shows uniquely slow fluorescence quenching kinetics, and the quenched fluorescence cannot be recovered by EDTA or sulfide. Most other metals quenched fluorescence instantaneously and can be fully recovered by these metal chelators. Various factors such as DNA sequence and length, chelating agent, pH, and fluorophore type were studied to understand the binding mechanism, leading to a unique two-stage binding model for Cr³⁺. This system has a wide dynamic range of up to 50 μM Cr³⁺ and a low limit of detection of 80 nM. It is also useful for measuring Cr³⁺ in lake water. This work proposes a new metal sensor design by monitoring binding kinetics with Cr³⁺ being a primary example.

A Silver-Specific DNAzyme with a New Silver Aptamer and Salt-Promoted Activity

Most RNA-cleaving DNAzymes require a metal ion to interact with the scissile phosphate for activity. Therefore, few unmodified DNAzymes work with thiophilic metals because of their low affinity for phosphate. Recently, an Ag⁺-specific Ag10c DNAzyme was reported via in vitro selection. Herein, Ag10c is characterized to rationalize the role of the strongly thiophilic Ag⁺. Systematic mutation studies indicate that Ag10c is a highly conserved DNAzyme and its Ag⁺ binding is unrelated to C-Ag⁺-C interaction. Its activity is enhanced by increasing Na⁺ concentrations in buffer. At the same metal concentration, activity decreases in the following order: Li⁺ > Na⁺ > K⁺. Ag10c binds one Na⁺ ion and two Ag⁺ ions for catalysis. The pH-rate profile has a slope of ∼1, indicating a single deprotonation step. Phosphorothioate substitution at the scissile phosphate suggests that Na⁺ interacts with the pro-R_p oxygen of the phosphate, and dimethyl sulfate footprinting indicates that the DNAzyme loop is a silver aptamer binding two Ag⁺ ions. Therefore, Ag⁺ exerts its function allosterically, while the scissile phosphate interacts with Na⁺, Li⁺, Na⁺, or Mg²⁺. This work suggests the possibility of isolating thiophilic metal aptamers based on DNAzyme selection, and it also demonstrates a new Ag⁺ aptamer.

The Optimization and Characterization of an RNA-Cleaving Fluorogenic DNAzyme Probe for MDA-MB-231 Cell Detection

Breast cancer is one of the most frequently diagnosed cancers in females worldwide and lacks specific biomarkers for early detection. In a previous study, we obtained a selective RNA-cleaving Fluorogenic DNAzyme (RFD) probe against MDA-MB-231 cells, typical breast cancer cells, through the systematic evolution of ligands by exponential process (SELEX). To improve the performance of this probe for actual application, we carried out a series of optimization experiments on the pH value of a reaction buffer, the type and concentration of cofactor ions, and sequence minimization. The length of the active domain of the probe reduced to 25 nt from 40 nt after optimization, which was synthesized more easily and economically. The detection limit of the optimized assay system was 2000 MDA-MB-231 cells in 30 min, which is more sensitive than the previous one (almost 5000 cells). The DNAzyme probe was also capable of distinguishing MDA-MB-231 cell specifically from 3 normal cells and 10 other tumor cells. This probe with high sensitivity, selectivity, and economic efficiency enhances the feasibility for further clinical application in breast cancer diagnosis. Herein, we developed an optimization system to produce a general strategy to establish an easy-to-use DNAzyme-based assay for other targets.

Theranostic DNAzymes

DNAzymes are catalytically active DNA molecules that are obtained via in vitro selection. RNA-cleaving DNAzymes have attracted significant attention for both therapeutic and diagnostic applications due to their excellent programmability, stability, and activity. They can be designed to cleave a specific mRNA to down-regulate gene expression. At the same time, DNAzymes can sense a broad range of analytes. By combining these two functions, theranostic DNAzymes are obtained. This review summarizes the progress of DNAzyme for theranostic applications. First, in vitro selection of DNAzymes is briefly introduced, and some representative DNAzymes related to biological applications are summarized. Then, the applications of DNAzyme for RNA cleaving are reviewed. DNAzymes have been used to cleave RNA for treating various diseases, such as viral infection, cancer, inflammation and atherosclerosis. Several formulations have entered clinical trials. Next, the use of DNAzymes for detecting metal ions, small molecules and nucleic acids related to disease diagnosis is summarized. Finally, the theranostic applications of DNAzyme are reviewed. The challenges to be addressed include poor DNAzyme activity under biological conditions, mRNA accessibility, delivery, and quantification of gene expression. Possible solutions to overcome these challenges are discussed, and future directions of the field are speculated.

Characterization of Highly Efficient RNA-Cleaving DNAzymes that Function at Acidic pH with No Divalent Metal-Ion Cofactors

Here, we describe the characterization of new RNA‐cleaving DNAzymes that showed the highest catalytic efficiency at pH 4.0 to 4.5, and were completely inactive at pH values higher than 5.0. Importantly, these DNAzymes did not require any divalent metal ion cofactors for catalysis. This clearly suggests that protonated nucleic bases are involved in the folding of the DNAzymes into catalytically active structures and/or in the cleavage mechanism. The trans‐acting DNAzyme variants were also catalytically active. Mutational analysis revealed a conservative character of the DNAzyme catalytic core that underpins the high structural requirements of the cleavage mechanism. A significant advantage of the described DNAzymes is that they are inactive at pH values close to physiological pH and under a wide range of conditions in the presence of monovalent and divalent metal ions. These pH‐dependent DNAzymes could be used as molecular cassettes in biotechnology or nanotechnology, in molecular processes that consist of several steps. The results expand the repertoire of DNAzymes that are active under nonphysiological conditions and shed new light on the possible mechanisms of catalysis.

Colorimetric Detection of Bacteria Using Litmus Test

There are increasing demands for simple but still effective methods that can be used to detect specific pathogens for point-of-care or field applications. Such methods need to be user-friendly and produce reliable results that can be easily interpreted by both specialists and non-professionals. The litmus test for pH is simple, quick, and effective as it reports the pH of a test sample via a simple color change. We have developed an approach to take advantage of the litmus test for bacterial detection. The method exploits a bacterium-specific RNA-cleaving DNAzyme to achieve two functions: recognizing a bacterium of interest and providing a mechanism to control the activity of urease. Through the use of magnetic beads immobilized with a DNAzyme-urease conjugate, the presence of bacteria in a test sample is relayed to the release of urease from beads to solution. The released urease is transferred to a test solution to hydrolyze urea into ammonia, resulting in an increase of pH that can be visualized using the classic litmus test.

New biorecognition molecules in biosensors for the detection of toxins

Biological and synthetic recognition elements are at the heart of the majority of modern bioreceptor assays. Traditionally, enzymes and antibodies have been integrated in the biosensor designs as a popular choice for the detection of toxin molecules. But since 1970s, alternative biological and synthetic binders have been emerged as a promising alternative to conventional biorecognition elements in detection systems for laboratory and field-based applications. Recent research has witnessed immense interest in the use of recombinant enzymatic methodologies and nanozymes to circumvent the drawbacks associated with natural enzymes. In the area of antibody production, technologies based on the modification of in vivo synthesized materials and in vitro approaches with development of "display "systems have been introduced in the recent years. Subsequently, molecularly-imprinted polymers and Peptide nucleic acid (PNAs) were developed as an attractive receptor with applications in the area of sample preparation and detection systems. In this article, we discuss all alternatives to conventional biomolecules employed in the detection of various toxin molecules We review recent developments in modified enzymes, nanozymes, nanobodies, aptamers, peptides, protein scaffolds and DNazymes. With the advent of nanostructures and new interface materials, these recognition elements will be major players in future biosensor development.

Biochemical and Biophysical Understanding of Metal Ion Selectivity of DNAzymes

This review summarizes research into the metal-binding properties of catalytic DNAzymes, towards the goal of understanding the structural properties leading to metal ion specificity. Progress made and insight gained from a range of biochemical and biophysical techniques are covered, and promising directions for future investigations are discussed.

Enhanced deoxyribozyme-catalyzed RNA ligation in the presence of organic cosolvents

Deoxyribozyme and aptamer selections are typically conducted in aqueous buffer solutions. Using nonaqueous cosolvents in selection experiments will help expand the activity of deoxyribozymes with non-oligonucleotide substrates and will allow identification of new aptamers for nonprotein targets. We undertook in vitro selections utilizing a small amount of methanol in the reaction to keep the herbicides alachlor and atrazine in solution with the goal of identifying deoxyribozymes that require these herbicides for activity. The resulting deoxyribozymes successfully catalyze RNA ligation, but do not require alachlor or atrazine. Surprisingly, some of these deoxyribozymes displayed better catalytic activity in the presence of methanol over just aqueous buffer. We investigated several organic cosolvents to see if this enhancement was limited to methanol and found that other cosolvents, including ethanol, DMSO, and DMF, supported activity; in some cases, greater enhancement was observed. On the basis of these results, we tested two other previously identified RNA-ligating deoxyribozymes to assess their tolerance of cosolvents and determined that different deoxyribozymes showed different responses to the cosolvents. Our results demonstrate that deoxyribozymes can tolerate and, in some cases, display enhanced activity in alternative solvent conditions. These findings will facilitate the development of responsive deoxyribozyme systems utilizing components with limited water solubility.

In Vitro Selection of a DNAzyme Cooperatively Binding Two Lanthanide Ions for RNA Cleavage

Trivalent lanthanide ions (Ln(3+)) were recently employed to select RNA-cleaving DNAzymes, and three new DNAzymes have been reported so far. In this work, dysprosium (Dy(3+)) was used with a library containing 50 random nucleotides. After six rounds of in vitro selection, a new DNAzyme named Dy10a was obtained and characterized. Dy10a has a bulged hairpin structure cleaving a RNA/DNA chimeric substrate. Dy10a is highly active in the presence of the five Ln(3+) ions in the middle of the lanthanide series (Sm(3+), Eu(3+), Gd(3+), Tb(3+), and Dy(3+)), while its activity descends on the two sides. The cleavage rate reaches 0.6 min(-1) at pH 6 with just 200 nM Sm(3+), which is the fastest among all known Ln(3+)-dependent enzymes. Dy10a binds two Ln(3+) ions cooperatively. When a phosphorothioate (PS) modification is introduced at the cleavage junction, the activity decreases by >2500-fold for both the Rp and Sp diastereomers, and thiophilic Cd(2+) cannot rescue the activity. The pH-rate profile has a slope of 0.37 between pH 4.2 and 5.2, and the slope was even lower at higher pH. On the basis of these data, a model of metal binding is proposed. Finally, a catalytic beacon sensor that can detect Ho(3+) down to 1.7 nM is constructed.

Aptamers: The "evolution" of SELEX

It has been more than two decades since the first aptamer molecule was discovered. Since then, aptamer molecules have gain much attention in the scientific field. This increasing traction can be attributed to their many desirable traits, such as 1) their potentials to bind a wide range of molecules, 2) their malleability, and 3) their low cost of production. These traits have made aptamer molecules an ideal platform to pursue in the realm of pharmaceuticals and bio-sensors. Despite the broad applications of aptamers, tedious procedure, high resource consumption, and limited nucleobase repertoire have hindered aptamer in application usage. To address these issues, new innovative methodologies, such as automation and single round SELEX, are being developed to improve the outcomes and rates in which aptamers are discovered.

An Efficient Lanthanide-Dependent DNAzyme Cleaving 2'-5'-Linked RNA

RNA can form two types of linkage. In addition to the predominant 3'-5' linkage, 2'-5'-linked RNA is also important in biology, medicine, and prebiotic studies. Here, in vitro selection was used to isolate a DNAzyme that specifically cleaves 2'-5' RNA by using Ce(3+) as the metal cofactor, but leaves the 3'-5' counterpart intact. This Ce5 DNAzyme requires trivalent light lanthanide ions and shows a rate of 0.16 min(-1) in the presence of 10 μm Ce(3+) ; the activity decreases with heavier lanthanide ions. This is the fastest DNAzyme reported for this reaction, and it might enable applications in chemical biology. As a proof-of-concept, using this DNAzyme, the reactions between phosphorothioate-modified RNA and strongly thiophilic metals (Hg(2+) and Tl(3+) ) were studied as a function of pH.

Hg2+ detection using a phosphorothioate RNA probe adsorbed on graphene oxide and a comparison with thymine-rich DNA

Using phosphorothioate modified RNA probes adsorbed by graphene oxide, Hg²⁺ is detected sensitively with less interference.

A turn-off fluorescent biosensor for the rapid and sensitive detection of uranyl ion based on molybdenum disulfide nanosheets and specific DNAzyme

A novel fluorescent biosensor for detecting uranyl ion (UO2(2+)) in aqueous environment has been developed based on the specific recognition of DNAzyme and the fluorescence quenching ability of molybdenum disulfide (MoS2) nanosheets. The DNAzyme contains a DNA enzyme strand and a 6-carboxylfluorescein (FAM)-labeled DNA substrate strand. We demonstrated that MoS2 nanosheets have low affinity to the substrate-enzyme complex DNAzyme. Whereas, in the presence of UO2(2+), UO2(2+) can specifically cleave DNAzyme to release FAM-labeled single-strand DNA and the released FAM-labeled single-strand DNA can be firmly adsorbed on the surface of MoS2 nanosheets, which resulted in an obvious decrease of fluorescence intensity. This provided a sensing platform for the rapid, simple and sensitive fluorescent detection of UO2(2+). By using the sensing platform, a sensitive and selective fluorescent method for the rapid detection of UO2(2+) has been developed. In comparison with previous biosensor, the proposed method has obvious analytical advantage such as relatively high sensitivity and good stability, short analytical time and low cost. It can be used to detect as low as 2.14 nM of UO2(2+) in aqueous environment with a recovery of 96-102% and a RSD<5% (n=6). The success of this study provides a promising alternative for the rapid and on-site detection of UO2(2+) in environmental monitoring.

An Efficient Catalytic DNA that Cleaves L-RNA

Many DNAzymes have been isolated from synthetic DNA pools to cleave natural RNA (D-RNA) substrates and some have been utilized for the design of aptazyme biosensors for bioanalytical applications. Even though these biosensors perform well in simple sample matrices, they do not function effectively in complex biological samples due to ubiquitous RNases that can efficiently cleave D-RNA substrates. To overcome this issue, we set out to develop DNAzymes that cleave L-RNA, the enantiomer of D-RNA, which is known to be completely resistant to RNases. Through in vitro selection we isolated three L-RNA-cleaving DNAzymes from a random-sequence DNA pool. The most active DNAzyme exhibits a catalytic rate constant ~3 min^-1 and has a structure that contains a kissing loop, a structural motif that has never been observed with D-RNA-cleaving DNAzymes. Furthermore we have used this DNAzyme and a well-known ATP-binding DNA aptamer to construct an aptazyme sensor and demonstrated that this biosensor can achieve ATP detection in biological samples that contain RNases. The current work lays the foundation for exploring RNA-cleaving DNAzymes for engineering biosensors that are compatible with complex biological samples.

Lanthanide-dependent RNA-cleaving DNAzymes as metal biosensors

Lanthanides represent a group of very important but challenging analytes for biosensor development. These 15 elements are very similar in their chemical properties. So far, limited success has been realized using the rational ligand design approach. My laboratory has successfully accomplished the task of carrying out combinatorial selection to isolate lanthanide-dependent RNA-cleaving DNAzymes. We report two new DNAzymes, each discovered in a different selection condition and both are highly specific to lanthanides. When both DNAzymes are used together, it is possible to identify the last few heavy lanthanides. Upon introducing a phosphorothioate modification, one of the abovementioned DNAzymes becomes highly active with many toxic heavy metals. With the selection of more DNAzymes with different activity patterns cross the lanthanide series, a sensor array might be produced for identifying each ion. This article is a minireview of the current developments on this topic and some of the historical aspects. It reflects the main content of the Fred Beamish Award presentation delivered at the 2014 Canadian Society for Chemistry Conference in Vancouver. Future directions in this area are also discussed.

Examination of bacterial inhibition using a catalytic DNA

Determination of accurate dosage of existing antibiotics and discovery of new antimicrobials or probiotics entail simple but effective methods that can conveniently track bacteria growth and inhibition. Here we explore the application of a previously reported fluorogenic E. coli-specific DNAzyme (catalytic DNA), RFD-EC1, as a molecular probe for monitoring bacterial inhibition exerted by antibiotics and for studying bacterial competition as a result of cohabitation. Because the DNAzyme method provides a convenient way to monitor the growth of E. coli, it is capable of determining the minimal inhibitory concentration (MIC) of antibiotics much faster than the conventional optical density (OD) method. In addition, since the target for RFD-EC1 is an extracellular protein molecule from E. coli, RFD-EC1 is able to identify pore-forming antibiotics or compounds that can cause membrane leakage. Finally, RFD-EC1 can be used to analyse the competition of cohabitating bacteria, specifically the inhibition of growth of E. coli by Bacillus subtilis. The current work represents the first exploration of a catalytic DNA for microbiological applications and showcases the utility of bacteria-sensing fluorogenic DNAzymes as simple molecular probes to facilitate antibiotic and probiotic research.

A new heavy lanthanide-dependent DNAzyme displaying strong metal cooperativity and unrescuable phosphorothioate effect

In vitro selection of RNA-cleaving DNAzymes was performed using three heavy lanthanide ions (Ln³⁺): Ho³⁺, Er³⁺ and Tm³⁺. The resulting sequences were aligned together and about half of the library contained a new family of DNAzyme. These DNAzymes have a simple loop structure, and they are active only with the seven heavy Ln³⁺. Among the tested non-lanthanide ions, only Y³⁺ induced cleavage and even Pb²⁺ failed to cleave, suggesting a very high specificity. A representative DNAzyme, Tm7, has a sigmoidal metal binding curve with a Hill coefficient of 3, indicating that three metal ions are involved in the catalytic step. Its pH-rate profile has a slope of 1, suggesting a single deprotonation step is involved in the rate-limiting step. Tm7 has a cleavage rate of 1.6 min⁻¹ at pH 7.8 with 10 μM Er³⁺. Phosphorothioate substitution at the cleavage junction completely inhibits the activity, which cannot be rescued by Cd²⁺ alone, or by a mixture of Er³⁺ and Cd²⁺, suggesting that two interacting metal ions are involved in direct bonding to both non-bridging oxygen atoms. A new model involving three lanthanide ions is proposed based on this study. A biosensor is engineered using Tm7 to detect Dy³⁺ down to 14 nM.

In vitro selection of a new lanthanide-dependent DNAzyme for ratiometric sensing lanthanides

Developing biosensors for lanthanides is an important but challenging analytical task. To address this problem, in vitro selection of RNA-cleaving DNAzymes was carried out using a library containing a region of 35 random nucleotides in the presence of Lu(3+), since Lu(3+) was reported to be the most efficient lanthanide for RNA cleavage. The resulting DNA sequences can be aligned to a single family with two conserved stretches of nucleotides. One of the representative DNAzymes (named Lu12) was further studied. Lu12 is more active with smaller lanthanides and has the lowest activity in the presence of the largest lanthanide (lutetium). Its cleavage rate is 0.12 min(-1) in the presence of 10 μM Nd(3+) at pH 6.0. This is a new DNAzyme, and a catalytic beacon sensor is designed by attaching a fluorophore/quencher pair, detecting Nd(3+) down to 0.4 nM (72 parts-per-trillion). This DNAzyme is highly selective for lanthanides as well, showing cleavage only with two nonlanthanide ions: Y(3+) and Pb(2+). We previously reported a DNAzyme named Ce13d, which has similar responses to all the trivalent lanthanides. Combining these two allows for a ratiometric assay that identifies a few large lanthanides.

Sensing parts-per-trillion Cd(2+), Hg(2+), and Pb(2+) collectively and individually using phosphorothioate DNAzymes

Cadmium, mercury, and lead are collectively banned by many countries and regions in electronic devices due to their extremely high toxicity. To date, no sensing method can detect them as a group and also individually with sufficient sensitivity and selectivity. An RNA-cleaving DNAzyme (Ce13d) was recently reported to be active with trivalent lanthanides, which are hard Lewis acids. In this work, phosphorothioate (PS) modifications were systematically made on Ce13d. A single PS modification at the substrate cleavage site shifts the activity from being dependent on lanthanides to soft thiophilic metals. By incorporating the PS modification to another DNAzyme, a sensor array was prepared to detect each metal. Individual sensors have excellent sensitivity (limit of detection = 4.8 nM Cd(2+), 2.0 nM Hg(2+), and 0.1 nM Pb(2+)). This study provides a new route to obtain metal-specific DNAzymes by atomic replacement and also offers important mechanistic insights into metal binding and DNAzyme catalysis.