Steric and Electronic Properties of N-Heterocyclic Carbenes (NHC): A Detailed Study on Their Interaction with Ni(CO)4

Electronic Profiling of N-Phosphine Oxide-Substituted Imidazolin-2-ylidenes (PoxIms) and Imidazolidin-2-ylidenes (SPoxIms)

A detailed electronic study of the N-phosphine oxide functionalized imidazolin-2-ylidenes (PoxIms) and imidazolidin-2-ylidenes (SPoxIms) has been performed experimentally using IR, 13C, and 77Se NMR spectroscopies. While the net donor/acceptor properties of the (S)PoxIms could not be differentiated via IR spectroscopy (TEP), NMR spectroscopic methods (HEP, Se) reveal that the (S)PoxIms are slightly weaker σ-donors but stronger π-acceptors compared to common NHCs. Moreover, backbone and substituent-effects could also be resolved by the latter, allowing for a ranking of their electronic properties. Finally, the donicities of these well-designed NHC ligands in their bidentate κ2-C,O modes were evaluated using HEP2 and compared to those of classical chelators.

Characterization of the Ligand Properties of Donor-stabilized Pnictogenyltrielanes

A general synthesis and the characterization of novel alkyl-substituted NHC-stabilized pnictogenylboranes NHC ⋅ BH2 ER2 (NHC=N-heterocyclic carbene, E=P, As; R2 =Me2 , Ph2 , t BuH, Cy2 , (SiMe3 )2 ) are reported. These compounds were reacted with Ni(CO)4 to the corresponding complexes of the type [(NHC ⋅ BH2 ER2 )Ni(CO)3 ] to determine their donor strength by Tolman Electronic Parameters (TEPs) and their steric demand as ligands compared to classical phosphines, superbasic phosphines and other commonly applied donor systems. The results show that the NHC-stabilized pnictogenyltrielanes can be considered as being highly basic, while their steric influence depends strongly on the organic residues as well as the donor attached to the {BH2 } moiety. Although weaker than commonly used superbasic phosphines, the donor strength of pnictogenyltrielanes in general can be classified as of similar strength as NHCs. The steric and electronic properties can easily be modified by alkyl substitution as evident from the TEP trends.

DFT-Enabled Development of Hemilabile (P∧N) Ligands for Gold(I/III) RedOx Catalysis: Application to the Thiotosylation of Aryl Iodides

Ligand-enabled oxidative addition of Csp2-X bonds to Au(I) centers has recently appeared as a valuable strategy for the development of catalytic RedOx processes. Several cross-coupling reactions that were previously considered difficult to achieve were reported lately, thus expanding the synthetic potential of gold(I) complexes beyond the traditional nucleophilic functionalization of π-systems. MeDalPhos has played an important role in this development and, despite several studies on alternative structures, remains, so far, the only general ligand for such process. We report herein the discovery and DFT-enabled structural optimization of a new family of hemilabile (P∧N) ligands that can promote the oxidative addition of aryl iodides to gold(I). These flexible ligands, which possess a common 2-methylamino heteroaromatic N-donor motif, are structurally and electronically tunable, beyond being easily accessible and affordable. The corresponding Au(I) complexes were shown to outperform the reactivity of (MeDalPhos)Au(I) in a series of alkoxy- and amidoarylations of alkenes. Their synthetic potential and comparatively higher reactivity were further highlighted in the thiotosylation of aryl iodides, a challenging unreported C-S cross-coupling reaction that could not be achieved under classical Pd(0/II) catalysis and that allows for general and divergent access to aryl sulfur derivatives.

%VBur index and steric maps: from predictive catalysis to machine learning

Steric indices are parameters used in chemistry to describe the spatial arrangement of atoms or groups of atoms in molecules. They are important in determining the reactivity, stability, and physical properties of chemical compounds. One commonly used steric index is the steric hindrance, which refers to the obstruction or hindrance of movement in a molecule caused by bulky substituents or functional groups. Steric hindrance can affect the reactivity of a molecule by altering the accessibility of its reactive sites and influencing the geometry of its transition states. Notably, the Tolman cone angle and %VBur are prominent among these indices. Actually, steric effects can also be described using the concept of steric bulk, which refers to the space occupied by a molecule or functional group. Steric bulk can affect the solubility, melting point, boiling point, and viscosity of a substance. Even though electronic indices are more widely used, they have certain drawbacks that might shift preferences towards others. They present a higher computational cost, and often, the weight of electronics in correlation with chemical properties, e.g. binding energies, falls short in comparison to %VBur. However, it is worth noting that this may be because the steric index inherently captures part of the electronic content. Overall, steric indices play an important role in understanding the behaviour of chemical compounds and can be used to predict their reactivity, stability, and physical properties. Predictive chemistry is an approach to chemical research that uses computational methods to anticipate the properties and behaviour of these compounds and reactions, facilitating the design of new compounds and reactivities. Within this domain, predictive catalysis specifically targets the prediction of the performance and behaviour of catalysts. Ultimately, the goal is to identify new catalysts with optimal properties, leading to chemical processes that are both more efficient and sustainable. In this framework, %VBur can be a key metric for deepening our understanding of catalysis, emphasizing predictive catalysis and sustainability. Those latter concepts are needed to direct our efforts toward identifying the optimal catalyst for any reaction, minimizing waste, and reducing experimental efforts while maximizing the efficacy of the computational methods.

Mono(Lewis Base)-Stabilized Gallium Iodide: An Unexplored Class of Promising Ligands

Quantum-chemical (DFT) calculations on hitherto unknown base(carbene)-stabilized gallium monoiodides (LB→GaI) suggest that these systems feature one lone pair of electrons and a formally vacant p-orbital - both centered at the central gallium atom - and exhibit metallomimetic behavior. The calculated reaction free energies as well as bond dissociation energies suggest that these LB→GaI systems are capable of forming stable donor-acceptor complexes with group 13 trichlorides. Examination of the ligand exchange reactions with iron and nickel complexes indicates their potential use as ligands in transition metal chemistry. In addition, it is found that the title compounds are also able to activate various enthalpically robust bonds. Further, a detailed mechanistic investigation of these small molecule activation processes reveals the non-innocent behavior of the carbene (base) moiety attached to the GaI fragment, thereby indicating the cooperative nature of these bond activation processes. The energy decomposition analysis (EDA) and activation strain model (ASM) of reactivity were also employed to quantitatively understand and rationalize the different activation processes.

N-Heterocyclic Olefins on a Silicon Surface

The adsorption of N-heterocyclic olefins (NHOs) on silicon is investigated in a combined scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory study. We find that both of the studied NHOs bind covalently, with ylidic character, to the silicon adatoms of the substrate and exhibit good thermal stability. The adsorption geometry strongly depends on the N-substituents: for large N-substituents, an upright adsorption geometry is favored, while a flat-lying geometry is found for the NHO with smaller wingtips. These different geometries strongly influence the quality and properties of the obtained monolayers. The upright geometry leads to the formation of ordered monolayers, whereas the flat-lying NHOs yield a mostly disordered, but denser, monolayer. The obtained monolayers both show large work function reductions, as the higher density of the flat-lying monolayer is found to compensate for the smaller vertical dipole moments. Our findings offer new prospects in the design of tailor-made ligand structures in organic electronics and optoelectronics, catalysis, and material science.

Poly(imidazolyliden-yl)borato Complexes of Tungsten: Mapping Steric vs. Electronic Features of Facially Coordinating Ligands

A convenient synthesis of [HB(HImMe)3](PF6)2 (ImMe = N-methylimidazolyl) is decribed. This salt serves in situ as a precursor to the tris(imidazolylidenyl)borate Li[HB(ImMe)3] pro-ligand upon deprotonation with nBuLi. Reaction with [W(≡CC6H4Me-4)(CO)2(pic)2(Br)] (pic = 4-picoline) affords the carbyne complex [W(≡CC6H4Me-4)(CO)2{HB(ImMe)3}]. Interrogation of experimental and computational data for this compound allow a ranking of familiar tripodal and facially coordinating ligands according to steric (percentage buried volume) and electronic (νCO) properties. The reaction of [W(≡CC6H4Me-4)(CO)2{HB(ImMe)3}] with [AuCl(SMe2)] affords the heterobimetallic semi-bridging carbyne complex [WAu(μ-CC6H4Me-4)(CO)2(Cl){HB(ImMe)3}].

Reversible Single-Electron-Transfer to Oxygen in a Stable N-Heterocyclic Carbene Palladium(I) Metalloradical

The chemical and electrochemical one-electron oxidation of [Pd(IPr)2] (1) leads to the formation of mononuclear palladium(I) complex [Pd(IPr)2][PF6] (2). This bench-stable metalloradical has been fully characterized and its structure confirmed by X-ray diffraction analysis. EPR and DFT studies confirm the localization of the unpaired electron onto the metal center. Low temperature NMR and EPR measurements reveal the ability of complex 2 to reversibly coordinate and reduce the dioxygen molecule, leading to the formation of a three-coordinate complex, [PdII(IPr)2(η1-O2)]+ (4), in which the unpaired electron has been transferred to the superoxido ligand.

Nickel-catalyzed ester carbonylation promoted by imidazole-derived carbenes and salts

Millions of tons of acetyl derivatives such as acetic acid and acetic anhydride are produced each year. These building blocks of chemical industry are elaborated into esters, amides, and eventually polymer materials, pharmaceuticals, and other consumer products. Most acetyls are produced industrially using homogeneous precious metal catalysts, principally rhodium and iridium complexes. We report here that abundant nickel can be paired with imidazole-derived carbenes or the corresponding salts to catalyze methyl ester carbonylation with turnover frequency (TOF) exceeding 150 hour-1 and turnover number (TON) exceeding 1600, benchmarks that invite comparisons to state-of-the-art rhodium-based systems and considerably surpass known triphenylphosphine-based nickel catalysts, which operate with TOF ~7 hour-1 and TON ~100 under the same conditions.

N-Heterocyclic Carbenes with Polyfluorinated Groups at the 4- and 5-Positions from [3 + 2] Cycloadditions between Formamidinates and cis-1,2-Difluoroalkene Derivatives

We herein report the formation of fluorinated N-heterocyclic carbenes (NHCFs) that bear fluorine atoms at the 4- and 5-positions of the imidazol-2-ylidene ring. Treatment of sodium N,N'-bis(aryl)formamidinates with tetrafluoroethylene followed by the addition of LiBF4 induced a [3 + 2] cycloaddition to afford 4,5-difluorinated imidazolium salts, which served as the precursors for 4,5-difluorinated NHCs. A key feature of this procedure is its applicability to other perfluorinated compounds, which enabled us to incorporate polyfluorinated functional groups at 4- and 5-positions on the imidazol-2-ylidene skeleton. Thus, employing octafluorocyclopentene and hexafluorobenzene led to the formation of 4,4,5,5,6,6-hexafluoro-1,3-diaryl-3,4,5,6-tetrahydrocyclopenta[d]imidazolium (CypIPrF·HBF4) and 4,5,6,7-tetrafluoro-1,3-diarylbenzimidazolium (BIPrF·HBF4) salts, respectively. A thorough NMR analysis of these NHCFs, their selenium adducts, and their tricarbonyl nickel complexes, (NHCF)Ni(CO)3, demonstrated that the fluorine substituents, contrary to expectations, tend to act as electron donors owing to the considerable positive mesomeric effect, while the perfluorocyclopentene-fused and tetrafluorobenzo-fused rings are pure electron acceptors due to their strong negative inductive effect. The unique and increased π-accepting character of the perfluorocyclopentene-fused and tetrafluorobenzo-fused NHCFs in both stoichiometric and catalytic reactions is further demonstrated by employing (NHCF)Ni(CO)3 and (NHCF)AuCl species, respectively. Moreover, an analysis of the % buried volume (%Vbur) values clearly suggests that the modification of the NHC backbone with polyfluorinated groups can drastically alter the electronic properties of the NHC ligand without substantially changing its steric properties. Our experimental results were further corroborated by a series of computational calculations.

Geometric and Electronic Effects in the Binding Affinity of Imidazole-Based N-Heterocyclic Carbenes to Cu(100)- and Ag(100)-Based Pd and Pt Single-Atom Alloy Surfaces

We have conducted nonlocal periodic density functional theory (DFT) calculations of N-heterocyclic carbenes (NHCs) adsorbed to Pd/Cu(100), Pt/Cu(100), Pd/Ag(100), and Pt/Ag(100) single atom alloys (SAAs) utilizing the nonlocal optPBE-vdW functional. NHCs with electron donating groups (EDGs) are predicted to bind more strongly to the SAA surface compared to NHCs functionalized with electron withdrawing groups (EWGs). Our calculations show that NHCs typically bind to SAA geometries containing a small space between the heteroatom sites for the SAAs considered. Generally, this pattern is predicted to persist for a single NHCs or for a pair of NHCs bound to the SAA surfaces. Approximate linear relationships between NMR-based parameters and NHC-SAA binding energies are uncovered. We predict that the binding of NHCs to SAA surfaces is composition-dependent and heteroatom geometry dependent.

Remote Steric and Electronic Effects of N-Heterocyclic Carbene Ligands on Alkene Reactivity and Regioselectivity toward Hydrocupration Reactions: The Role of Expanded-Ring N-Heterocyclic Carbenes

The remote groups in N-heterocyclic carbene (NHC) ligands have a significant influence on metal-catalyzed reactions. We examine how remote bulkiness, electronic groups, and expanded-ring NHCs (ER-NHCs) influence alkene reactivity and regioselectivity toward hydrocupration using density functional theory calculations. The impact of remote steric bulkiness on the Cu-H insertion rate is analyzed, revealing a strong correlation between the steric substituent constant and rate ratio, where a bulky group increases the rate due to reduced steric effects in the transition state (TS). The steric properties of the examined catalysts (with a remote group R2 = CPh3, CHPh2, CH2Ph, CH3, and H) and their corresponding TSs are found to be modulated greatly by the remote steric substitution group and the ring size of the NHC ligand. Enhanced bulkiness enhances the nucleophilic Cu-H moiety. The remote electronic groups have a smaller impact on insertion barrier compared to that of steric hindrance. Furthermore, ER-NHC exploration indicates that NHCs with over five-membered rings have a significantly negative influence on the reaction rate. Finally, with a highly bulky group (R2 = CPh3), anti-Markovnikov insertion preference is attributed to high interaction energy and improved steric properties. Overall, our findings here provide valuable insights for the development of a more effective catalyst in metal-catalyzed reactions.

Skeletal metalation of lactams through a carbonyl-to-nickel-exchange logic

Classical metalation reactions such as the metal-halogen exchange have had a transformative impact on organic synthesis owing to their broad applicability in building carbon-carbon bonds from carbon-halogen bonds. Extending the metal-halogen exchange logic to a metal-carbon exchange would enable the direct modification of carbon frameworks with new implications in retrosynthetic analysis. However, such a transformation requires the selective cleavage of highly inert chemical bonds and formation of stable intermediates amenable to further synthetic elaborations, hence its development has remained considerably challenging. Here we introduce a skeletal metalation strategy that allows lactams, a prevalent motif in bioactive molecules, to be readily converted into well-defined, synthetically useful organonickel reagents. The reaction features a selective activation of unstrained amide C-N bonds mediated by an easily prepared Ni(0) reagent, followed by CO deinsertion and dissociation under mild room temperature conditions in a formal carbonyl-to-nickel-exchange process. The underlying principles of this unique reactivity are rationalized by organometallic and computational studies. The skeletal metalation is further applied to a direct CO excision reaction and a carbon isotope exchange reaction of lactams, underscoring the broad potential of metal-carbon exchange logic in organic synthesis.

Development of regiodivergent asymmetric reductive coupling reactions of allenamides to access heteroatom-rich organic compounds

Organic compounds of biological importance often contain multiple stereogenic C-heteroatom functional groups (e.g. amines, alcohols, and ethers). As a result, synthetic methods to access such compounds in a reliable and stereoselective fashion are important. In this feature article, we present a strategy to enable the introduction of multiple C-heteroatom functional groups in a regiodivergent cross-coupling approach through the use of reductive coupling chemistry employing allenamides. Such processes allow for opportunities to access different heteroatom substitution patterns from the same starting materials.

Highly Soluble Cyclic Organoalanes Based on Anionic Dicarbenes

Cyclic organoalane compounds [(ADCAr )AlH2 ]2 (ADCAr = ArC{(DippN)C}2 ; Dipp = 2,6-iPr2 C6 H3 ; Ar = Ph or 4-PhC6 H4 (Bp)) based on anionic dicarbene (ADC) frameworks have been reported as crystalline solids. Treatments of Li(ADCAr ) with LiAlH4 at room temperature afford [(ADCAr )AlH2 ]2 with the concomitant release of LiH. Compounds [(ADCAr )AlH2 ]2 are stable crystalline solids and are freely soluble in common organic solvents. They are annulated tricyclic compounds with an almost planar central C4 Al2 -core embedded between two peripheral 1,3-imidazole (C3 N2 ) rings. At room temperature, [(ADCPh )AlH2 ]2 readily reacts with CO2 to form two- and four-fold hydroalumination products [(ADCPh )AlH(OCHO)]2 and [(ADCPh )Al(OCHO)2 ]2 , respectively. Further hydroalumination reactivity of [(ADCPh )AlH2 ]2 has been shown with isocyanate (RNCO) and isothiocyanate (RNCS) species (R=alkyl or aryl group). All compounds have been characterized by NMR spectroscopy, mass spectrometry, and single-crystal X-ray diffraction.

Reversible Modulation of the Electronic and Spatial Environment around Ni(0) Centers Bearing Multifunctional Carbene Ligands with Triarylaluminum

Designing and modulating the electronic and spatial environments surrounding metal centers is a crucial issue in a wide range of chemistry fields that use organometallic compounds. Herein, we demonstrate a Lewis-acid-mediated reversible expansion, contraction, and transformation of the spatial environment surrounding nickel(0) centers that bear N-phosphine oxide-substituted N-heterocyclic carbenes (henceforth referred to as (S)PoxIms). Reaction between tetrahedral (syn-κ-C,O-(S)PoxIm)Ni(CO)₂ and Al(C₆F₅)₃ smoothly afforded heterobimetallic Ni/Al species such as trigonal-planar {κ-C-Ni(CO)₂}(μ-anti-(S)PoxIm){κ-O-Al(C₆F₅)₃} via a complexation-induced rotation of the N-phosphine oxide moieties, while the addition of 4-dimethylaminopyridine resulted in the quantitative regeneration of the former Ni complexes. The corresponding interconversion also occurred between (SPoxIm)Ni(η²:η²-diphenyldivinylsilane) and {κ-C-Ni(η²:η²-diene)}(μ-anti-SPoxIm){κ-O-Al(C₆F₅)₃} via the coordination and dissociation of Al(C₆F₅)₃. The shape and size of the space around the Ni(0) center was drastically changed through this Lewis-acid-mediated interconversion. Moreover, the multinuclear NMR, IR, and XAS analyses of the aforementioned carbonyl complexes clarified the details of the changes in the electronic states on the Ni centers; i.e., the electron delocalization was effectively enhanced among the Ni atom and CO ligands in the heterobimetallic Ni/Al species. The results presented in this work thus provide a strategy for reversibly modulating both the electronic and spatial environment of organometallic complexes, in addition to the well-accepted Lewis-base-mediated ligand-substitution methods.

A Redox Transmetalation Step in Nickel-Catalyzed C-C Coupling Reactions

Ni-catalyzed C-H functionalization reactions are becoming efficient routes to access a variety of functionalized arenes, yet the mechanisms of these catalytic C-C coupling reactions are not well understood. Here, we report the catalytic and stoichiometric arylation reactions of a nickel(II) metallacycle. Treatment of this species with silver(I)-aryl complexes results in facile arylation, consistent with a redox transmetalation step. Additionally, treatment with electrophilic coupling partners generates C-C and C-S bonds. We anticipate that this redox transmetalation step may be relevant to other coupling reactions that employ silver salts as additives.

On the Edge of the Known: Extremely Electron-Rich (Di)Carboranyl Phosphines

The syntheses of the first B9-connected carboranylphosphines (B9-Phos) featuring two carboranyl moieties as well as access to B9-Phos ligands with bulky electron-donating substituents, previously deemed unattainable, is reported. The electrochemical properties of the B9-Phos ligands were investigated, revealing the ability of the mesityl derivatives to form stabilized phosphoniumyl radical cations. The B9-Phos ligands display an extremely electron-releasing character surpassing that of alkyl phosphines and commonly used N-heterocyclic carbenes. This is demonstrated by their very small Tolman electronic parameters (TEPs) as well as extremely low P-Se coupling constants. Cone angles and buried volumes attest to the high steric demand exerted by the (di)carboranyl phosphines. The dicarboranyl phosphine Au^I complexes show superior catalytic performance in the hydroamination of alkynes compared to the monocarboranyl phosphine analogs.

Nickel-catalyzed divergent Mizoroki-Heck reaction of 1,3-dienes

Developing efficient strategies to realize divergent arylation of dienes has been a long-standing synthetic challenge. Herein, a nickel catalyzed divergent Mizoroki-Heck reaction of 1,3-dienes has been demonstrated through the regulation of ligands and additives. In the presence of Mn/NEt₃, the Mizoroki-Heck reaction of dienes delivers linear products under Ni(dppe)Cl₂ catalysis in high regio- and stereoselectivities. With the help of catalytic amount of organoboron and NaF, the use of bulky ligand IPr diverts the selectivity from linear products to branched products. Highly aryl-substituted compounds can be transformed from dispersive Mizoroki-Heck products programmatically. Preliminary experimental studies are carried out to elucidate the role of additives.

Activation of Ge-H and Sn-H Bonds with N-Heterocyclic Carbenes and a Cyclic (Alkyl)(amino)carbene

A study of the reactivity of several N-heterocyclic carbenes (NHCs) and the cyclic (alkyl)(amino)carbene 1-(2,6-di-iso-propylphenyl)-3,3,5,5-tetramethyl-pyrrolidin-2-ylidene (cAAC^Me ) with the group 14 hydrides GeH₂ Mes₂ and SnH₂ Me₂ (Me=CH₃ , Mes=1,3,5-(CH₃ )₃ C₆ H₂ ) is presented. The reaction of GeH₂ Mes₂ with cAAC^Me led to the insertion of cAAC^Me into one Ge-H bond to give cAAC^Me H-GeHMes₂ (1). If 1,3,4,5-tetramethyl-imidazolin-2-ylidene (Me₂ Im^Me ) was used as the carbene, NHC-mediated dehydrogenative coupling occurred, which led to the NHC-stabilized germylene Me₂ Im^Me ⋅GeMes₂ (2). The reaction of SnH₂ Me₂ with cAAC^Me also afforded the insertion product cAAC^Me H-SnHMe₂ (3), and reaction of two equivalents Me₂ Im^Me with SnH₂ Me₂ gave the NHC-stabilized stannylene Me₂ Im^Me ⋅SnMe₂ (4). If the sterically more demanding NHCs Me₂ Im^Me , 1,3-di-isopropyl-4,5-dimethyl-imidazolin-2-ylidene (iPr₂ Im^Me ) and 1,3-bis-(2,6-di-isopropylphenyl)-imidazolin-2-ylidene (Dipp₂ Im) were employed, selective formation of cyclic oligomers (SnMe₂ )_n (5; n=5-8) in high yield was observed. These cyclic oligomers were also obtained from the controlled decomposition of cAAC^Me H-SnHMe₂ (3).

Alternating Ring-Opening Metathesis Polymerization Promoted by Ruthenium Catalysts Bearing Unsymmetrical NHC Ligands

In this paper, Grubbs- and Hoveyda–Grubbs-type olefin metathesis catalysts featuring N-cyclopentyl/N’-mesityl backbone-substituted N-heterocyclic carbene (NHC) ligands were synthesized. Their propensity to promote the alternating ring-opening metathesis copolymerization (ROMP) of norbornene (NBE) with cyclooctene (COE) or cyclopentene (CPE) was evaluated and compared to that shown by analogous N-cyclohexyl complexes. High degrees of chemoselectivity were achieved in both copolymerizations. The presence of the N-cyclopentyl substituent allowed for the achievement of up to 98% and 97% of alternating diads for NBE-COE and NBE-CPE copolymers, respectively, at low comonomer ratios. Density functional theory (DFT) studies showed that both the sterical and electronic effects of NHC ligands influence catalyst selectivity.

Towards new coordination modes of 1,2,3-triazolylidene: controlled by the nature of the 1st metalation in a heteroditopic bis-NHC ligand

An unusual effect of the nature of the first metal coordination of a heteroditopic N-heterocyclic carbene ligand (L2) towards the coordination behavior of 1,2,3-tzNHC is explored. The first metal coordination at the ImNHC site (complexes 3 and 4) was noted to substantially influence the electronics of the 1,2,3-triazolium moiety leading to an unprecedented chemistry of this MIC donor. Along this line, the Rh^III/Ir^III-orthometalation in complexes 4 makes the triazolium C₄-H more downfield shifted than C₅-H, whereas a reverse trend, although to a lesser extent, is observed in the case of the non-chelated Pd^II-coordination. This difference in behavior assisted us to achieve the selective activation of triazole C₄/C₅ positions, not observed before, as supported by the isolation of the homo- and hetero-bimetallic complexes, 5, 6 and 7-9via C₅- and C₄-metalation, respectively. Furthermore, the %V _bur calculations eliminate any considerable steric influence and the DFT studies strongly support the selectivity observed during bimetalation.

Three-Electron Nickel(I)/Nickel(0) Half-Bond

An (N-heterocyclic carbene)nickel(I) cation precursor reacts with the corresponding nickel(0) complex to form a dinickel(I,0) monocation. The Ni···Ni distance in this cation is 0.93 Å shorter than in the analogous dinickel(0) complex. Although the solid-state structure shows equivalent Ni centers, density functional theory calculations indicate significant electronic localization. Reactions with CO and NO form mononuclear carbonyl and nitrosyl complexes. Oxidative addition of an aryl bromide results in C-arylation of the carbene ligands.

Tricyanoborane‐Functionalized Anionic N‐Heterocyclic Carbenes: Adjustment of Charge and Stereo‐Electronic Properties

The 1‐methyl‐3‐(tricyanoborane)imidazolin‐2‐ylidenate anion (2) was obtained in high yield by deprotonation of the B(CN)₃‐methylimidazole adduct 1. Regarding charge and stereo‐electronic properties, anion 2 closes the gap between well‐known neutral NHCs and the ditopic dianionic NHC, the 1,3‐bis(tricyanoborane)imidazolin‐2‐ylidenate dianion (IIb). The influence of the number of N‐bonded tricyanoborane moieties on the σ‐donating and π‐accepting properties of NHCs was assessed by quantum chemical calculations and verified by experimental data on 2, IIb, and 1,3‐dimethylimidazolin‐2‐ylidene (IMe, IIa). Therefore NHC 2, which acts as a ditopic ligand via the carbene center and the cyano groups, was reacted with alkyl iodides, selenium, and [Ni(CO)₄] yielding alkylated imidazoles 3 and 4, the anionic selenium adduct 5, and the anionic nickel tricarbonyl complex 8, respectively. The results of this study prove that charge, number of coordination sites, buried volume (%V_bur) and σ‐donor and π‐acceptor abilities of NHCs can be effectively fine‐tuned via the number of tricyanoborane substituents.

Room-Temperature Reversible Chemisorption of Carbon Monoxide on Nickel(0) Complexes

Chemisorption on organometallic-based adsorbents is crucial for the controlled separation and long-term storage of gaseous molecules. The formation of covalent bonds between the metal centers in the adsorbents and the targeted gases affects the desorption efficiency, especially when the oxidation state of the metal is low. Herein, we report a pressure-responsive nickel(0)-based system that is able to reversibly chemisorb carbon monoxide (CO) at room temperature. The use of N-heterocyclic carbene ligands with hemi-labile N-phosphine oxide substituents facilitates both the adsorption and desorption of CO on nickel(0) via ligand substitution. Ionic liquids were used as the reaction medium to enhance the desorption rate and establish a reusable system. These results showcase a way for the sustainable chemisorption of CO using a zero-valent transition-metal complex.

Ylide-Substituted Phosphines: A Platform of Strong Donor Ligands for Gold Catalysis and Palladium-Catalyzed Coupling Reactions

The development of homogeneous catalysts is strongly connected to the design of new, sophisticated ligands, which resolve limitations of a given reaction protocol by manipulating the electronic properties of the metal and its spatial environment. Phosphines are a privileged class of ligands that find applications in many catalytic transformations, ranging from hydrogenation reactions to hydroformylation and coupling chemistry. For many years, chemists have been trying to improve the efficiency, selectivity, and application of coupling reactions. The use of highly electron-rich and bulky phosphines was often associated with increased selectivity and efficiency and led to the development of a vast variety of electron-rich alkyl-substituted phosphines. However, this concept of increasing the ligand donor strength reaches its limits with the use of trialkyl-substituted phosphines with tri-tert-butylphosphine thus being one of the most active ligands for many years. In the course of our research efforts to use the special donor strength of ylides to stabilize electron-deficient, low-valent main group compounds, we realized that ylide-substituted phosphine (YPhos) ligands possess remarkably strong donor abilities. Moreover, the YPhos ligands are highly tunable by changing the nature of the groups on the phosphonium, phosphine, or central ylidic carbon atom. We thus obtained a ligand platform with donor capabilities ranging from PCy₃ to even stronger donor abilities than N-heterocyclic carbenes, while being more sterically demanding than simple phosphines as well as many well-known biarylphosphine ligands.These properties led us to explore the applicability of the YPhos ligands in catalysis. In a series of recent reports, our group applied YPhos ligands in gold and palladium catalyzed reactions at catalytic loadings applicable for medium- to large-scale applications. The increased donor strength and unique architecture allowed for remarkable activities in a series of transformations at mild reactions conditions. For gold(I)-catalyzed reactions, we obtained turnover numbers (TONs) for the hydroamination of phenylacetylene with aniline of over 20 000. Also, more complex reactions were easily catalyzed with efficiencies greater than those of other known gold(I) catalysts. Similar efficacies were found in a series of palladium-catalyzed coupling reactions. In Buchwald-Hartwig aminations, unprecedented activities for the amination of aryl chlorides were reached at room temperature. The speed of formation of the catalytically active mono-YPhos palladium species allowed for some of the amination reactions to be completed in only a few minutes. Adjustment of the ligand design enabled the use of a large variety of different aryl and alkyl amines of different steric demands. Furthermore, the YPhos ligands in general showed high activities and selectivity in the coupling of a variety of carbon nucleophiles with aryl chlorides, bromides, and triflates. This enabled the development of efficient reaction protocols for the α-arylation of unhindered ketones and the coupling of Grignard and zinc reagents as well as the first efficient coupling of chloroarenes with alkyllithium compounds. This Account summarizes the recent development of YPhos ligands and their application in gold and palladium catalysis. We also hope to stimulate further use of this ligand platform in catalysis in the future.

Chemistry of Compounds Based on 1,2,3-Triazolylidene-Type Mesoionic Carbenes

Mesoionic carbenes (MICs) of the 1,2,3-triazolylidene type have established themselves as a popular class of compounds over the past decade. Primary reasons for this popularity are their modular synthesis and their strong donor properties. While such MICs have mostly been used in combination with transition metals, the past few years have also seen their utility together with main group elements. In this paper, we present an overview of the recent developments on this class of compounds that include, among others, (i) cationic and anionic MIC ligands, (ii) the donor/acceptor properties of these ligands with a focus on the several methods that are known for estimating such donor/acceptor properties, (iii) a detailed overview of 3d metal complexes and main group compounds with these MIC ligands, (iv) results on the redox and photophysical properties of compounds based on MIC ligands, and (v) an overview on electrocatalysis, redox-switchable catalysis, and small-molecule activation to highlight the applications of compounds based on MIC ligands in contemporary chemistry. By discussing several aspects from the synthetic, spectroscopic, and application point of view of these classes of compounds, we highlight the state of the art of compounds containing MICs and present a perspective for future research in this field.

Exploring steric and electronic parameters of biaryl phosphacycles

Steric and electronic parameters of the newly developed biaryl phosphacycles derived from the phobane[3.3.1] (Phob) and phosphatrioxa-adamantane (Cg) moieties were quantified from various experimental and theoretical methods.

Application of Industrially Relevant HydroFluoroOlefin (HFO) Gases in Organic Syntheses

Hydrofluoroolefin (HFO) gases are state-of-the-art cooling agents with widespread household and industrial applications. Considering their structural benefits these fluorous feedstocks have gained the attention of organic chemists in the last couple of years. In this short review we summarized the existing synthetic transformations of these gaseous starting material and present their applicability in the synthesis of fluorine-containing organic molecules, which have potential importance as building blocks and reagents for diverse syntheses.

1 Introduction

2 Addition Reactions

3 Substitutions

4 Organometallic Chemistry

4.1 Organolithium Compounds

4.2 Organometallic Complexes

4.3 Silicon Organic Chemistry

4.4 Boron Organic Chemistry

4.5 Palladium-Catalyzed Transformations

4.6 Metathesis

4.7 Hydroesterification, Hydroformylation

5 Conclusions

Development of a Modified System to Provide Improved Diastereocontrol in the Linear-Selective Cu-Catalyzed Reductive Coupling of Ketones and Allenamides

Chiral γ-lactones are prevalent organic architectures found in a large array of natural products. In this work, we disclose the development of a modified catalytic system utilizing a commercially available Cu-phosphite catalyst for the diastereoselective reductive coupling of chiral allenamides and ketones to afford chiral γ-lactone precursors in 80:20 to 99:1 dr.

Chelating Phosphine-N-Heterocyclic Carbene Platinum Complexes via Catalytic Asymmetric Hydrophosphination and Their Cytotoxicity Toward MKN74 and MCF7 Cancer Cell Lines

A series of activated vinyl azoles was hydrophosphinated in the presence of a chiral palladacycle catalyst under mild conditions to give enantioenriched phosphine azoles with moderate enantioselectivities and yields. The racemic phosphine azoles were transformed into eleven novel chelating phosphine-N-heterocyclic carbene (NHC) platinum complexes. The drug efficacies of nine selected phosphine-NHC platinum(II) chlorides in two cancer cell lines (MKN74 and MCF7) were evaluated, and two were found to exhibit activities comparable to that of cisplatin.

Case Study of N-i Pr versus N-Mes Substituted NHC Ligands in Nickel Chemistry: The Coordination and Cyclotrimerization of Alkynes at [Ni(NHC)2 ]

A case study on the effect of the employment of two different NHC ligands in complexes [Ni(NHC)₂] (NHC=ⁱPr₂Im^Me1^Me, Mes₂Im 2) and their behavior towards alkynes is reported. The reaction of a mixture of [Ni₂(ⁱPr₂Im^Me)₄(μ‐(η² : η²)‐COD)] B/ [Ni(ⁱPr₂Im^Me)₂(η⁴‐COD)] B’ or [Ni(Mes₂Im)₂] 2, respectively, with alkynes afforded complexes [Ni(NHC)₂(η²‐alkyne)] (NHC=ⁱPr₂Im^Me: alkyne=MeC≡CMe 3, H₇C₃C≡CC₃H₇4, PhC≡CPh 5, MeOOCC≡CCOOMe 6, Me₃SiC≡CSiMe₃7, PhC≡CMe 8, HC≡CC₃H₇9, HC≡CPh 10, HC≡C(p‐Tol) 11, HC≡C(4‐^tBu‐C₆H₄) 12, HC≡CCOOMe 13; NHC=Mes₂Im: alkyne=MeC≡CMe 14, MeOOCC≡CCOOMe 15, PhC≡CMe 16, HC≡C(4‐^tBu‐C₆H₄) 17, HC≡CCOOMe 18). Unusual rearrangement products 11 a and 12 a were identified for the complexes of the terminal alkynes HC≡C(p‐Tol) and HC≡C(4‐^tBu‐C₆H₄), 11 and 12, which were formed by addition of a C−H bond of one of the NHC N‐ⁱPr methyl groups to the C≡C triple bond of the coordinated alkyne. Complex 2 catalyzes the cyclotrimerization of 2‐butyne, 4‐octyne, diphenylacetylene, dimethyl acetylendicarboxylate, 1‐pentyne, phenylacetylene and methyl propiolate at ambient conditions, whereas 1^Me is not a good catalyst. The reaction of 2 with 2‐butyne was monitored in some detail, which led to a mechanistic proposal for the cyclotrimerization at [Ni(NHC)₂]. DFT calculations reveal that the differences between 1^Me and 2 for alkyne cyclotrimerization lie in the energy profile of the initiation steps, which is very shallow for 2, and each step is associated with only a moderate energy change. The higher stability of 3 compared to 14 is attributed to a better electron transfer from the NHC to the metal to the alkyne ligand for the N‐alkyl substituted NHC, to enhanced Ni‐alkyne backbonding due to a smaller C_NHC−Ni−C_NHC bite angle, and to less steric repulsion of the smaller NHC ⁱPr₂Im^Me.

NMR Crystallography Enhanced by Quantum Chemical Calculations and Liquid State NMR Spectroscopy for the Investigation of Se-NHC Adducts*

N-heterocyclic carbene ligands (NHC) are widely utilized in catalysis and material science. They are characterized by their steric and electronic properties. Steric properties are usually quantified on the basis of their static structure, which can be determined by X-ray diffraction. The electronic properties are estimated in the liquid state; for example, via the ⁷⁷ Se liquid state NMR of Se-NHC adducts. We demonstrate that ⁷⁷ Se NMR crystallography can contribute to the characterization of the structural and electronic properties of NHC in solid and liquid states. Selected Se-NHC adducts are investigated via ⁷⁷ Se solid state NMR and X-ray crystallography, supported by quantum chemical calculations. This investigation reveals a correlation between the molecular structure of adducts and NMR parameters, including not only isotropic chemical shifts but also the other chemical shift tensor components. Afterwards, the liquid state ⁷⁷ Se NMR data is presented and interpreted in terms of the quantum chemistry modelling. The discrepancy between the structural and electronic properties, and in particular the π-accepting abilities of adducts in the solid and liquid states is discussed. Finally, the ¹³ C isotropic chemical shift from the liquid state NMR and the ¹³ C tensor components are also discussed, and compared with their ⁷⁷ Se counterparts. ⁷⁷ Se NMR crystallography can deliver valuable information about NHC ligands, and together with liquid state ⁷⁷ Se NMR can provide an in-depth outlook on the properties of NHC ligands.

Recent Advances in the Syntheses and Catalytic Applications of Homonuclear Ru-, Rh-, and Ir-Complexes of CNHC ^C Cyclometalated Ligands

In the past few decades, chemistry of cyclometalated species has gained momentum with increased applications in several areas of scientific developments. Cyclometalation reactions result in the formation of stable metallacycles through the generation of metal-carbon covalent bonds by activating the unreactive Csp² -H or Csp³ -H bonds. The extra stability gained by the formation of metallacycles enhances their applicability scopes especially in the area of homogeneous catalysis. In the recent research development in this area, NHC ligands (strong σ-donor and generally, weak π-acceptor) have been found to be one of the most suitable candidates for the intramolecular C-H activation process which leads to the cyclometalated species. The growth in the area of cyclometalation chemistry that started in the late 20^th century is still continuing and in the past few decades, various examples of NHC derived transition metal-based cyclometalated complexes came into the picture. As covering all the reported literatures in this area (includes mainly late transition metals) will exceed the limits of minireview, we restricted ourselves to the recent (2015 - May 2021) examples of the most common Ru-, Rh-, and Ir-based C_NHC ^C cyclometalated complexes and their applications in various homogeneous catalytic conversions such as transfer hydrogenation, amidation, oxidation of alcohols, annulations, and so forth.