Microwave-Assisted Self-Organization of Colloidal Particles in Confining Aqueous Droplets

Colloidal photonic crystals towards biological applications

Colloidal photonic crystals (CPCs), fabricated from the assembly of micro-/nano-particles, have attracted considerable interest due to their unique properties, such as structural color, slow-photon effect, and high specific surface area (SSA). Benefiting from these properties, significant progress has been made in the biological applications of CPCs. In this perspective, these properties and relative manipulation strategies are firstly discussed, building bridges between properties and biological applications of CPCs. Structural color endows CPCs with naked-eye sensing capability, which can be applied to physiological state assessment and diagnosis, as well as self-report of CPC-based diagnostic and therapeutic devices. The slow-photon effect contributes to enhanced fluorescence, surface-enhanced Raman scattering, and efficacy of photodynamic/photothermal therapy, when CPCs are combined with corresponding functional materials. High SSA provides CPCs with abundant binding sites and superior capabilities for loading, adsorption, delivery, etc. These properties can be utilized individually or synergistically to grant CPCs superior performance in biological applications. Next, the recent advancements of CPCs towards biological applications are summarized, including biosensors, wound dressings, cells-on-a-chip, and phototherapy. Finally, a perspective on the challenges and future development of CPCs for biological applications is presented.

Influence of Sphericity on Surface Termination of Icosahedral Colloidal Clusters

Colloids self-organize into icosahedral clusters composed of a Mackay core and an anti-Mackay shell under spherical confinement to minimize the free energy. This study explores the variation of surface arrangements of colloids in icosahedral clusters, focusing on the determining factors behind the surface arrangement. To efficiently assemble particles in emulsion droplets, droplet-to-droplet osmotic extraction from particle-laden droplets to salt-containing droplets is used, where the droplets are microfluidically prepared to guarantee a high size uniformity. The icosahedral clusters are optimally produced during a 24-h consolidation period at a 0.04 m salt concentration. The findings reveal an increase in the number of particle layers from 10 to 15 in the icosahedral clusters as the average number of particles increases from 3300 to 11 000. Intriguingly, the number of layers in the anti-Mackay shells, or surface termination, appears to more strongly depend on the sphericity of the clusters than on the deviation in the particle count from an ideal icosahedral cluster. This result suggests that the sphericity of the outermost layer, formed by the late-stage rearrangement of particles to form an anti-Mackay shell near the droplet interface, may play a pivotal role in determining the surface morphology to accommodate a spherical interface.

Structural Color Inks Containing Photonic Microbeads for Direct Writing

Printing structurally colored patterns is of great importance for providing customized graphics for various purposes. Although a direct writing technique has been developed, the use of colloidal dispersions as photonic inks requires delicate printing conditions and restricts the mechanical and optical properties of printed patterns. In this work, we produce elastic photonic microbeads through scalable bulk emulsification and formulate photonic inks containing microbeads for direct writing. To produce the microbeads, a photocurable colloidal dispersion is emulsified into a highly concentrated sucrose solution via vortexing, which results in spherical emulsion droplets with a relatively narrow size distribution. The microbeads are produced by photopolymerization and are then suspended in urethane acrylate resin at volume fractions of 0.35-0.45. The photonic inks retain high color saturation of the microbeads and offer enhanced printability and dimensional control on various target substrates including fabrics, papers, and even skins. Importantly, the printed graphics show high mechanical stability as the elastic microbeads are embedded in the polyurethane matrix. Moreover, the colors show a wide viewing angle and low-angle dependency due to the optical isotropy of individual microbeads and light refraction at the air-matrix interface. We postulate that this versatile direct writing technique is potentially useful for structural color coating and printing on the surfaces of arbitrary 3D objects.

Hydrogel-Encased Photonic Microspheres with Enhanced Color Saturation and High Suspension Stability

Regular arrays of colloidal particles can produce striking structural colors without the need for any chemical pigments. Regular arrays of colloidal particles can be processed into microparticles via emulsion templates for use as structural colorants. Photonic microparticles, however, suffer from intense incoherent scattering and lack of suspension stability. We propose a microfluidic technique to generate hydrogel-shelled photonic microspheres that display enhanced color saturation and suspension stability. We created these microspheres using oil-in-water-in-oil (O/W/O) double-emulsion droplets with well-defined dimensions with a capillary microfluidic device. The inner oil droplet contains silica particles in a photocurable monomer, while the middle water droplet carries the hydrogel precursor. Within the inner oil droplet, silica particles arrange into crystalline arrays due to solvation-layer-induced interparticle repulsion. UV irradiation solidifies the inner photonic core and the outer hydrogel shell. The hydrogel shell reduces white scattering and enhances the suspension stability in water. Notably, the hydrogel precursor in the water droplet aids in maintaining the solvation layer, resulting in enhanced crystallinity and richer colors compared with microspheres from O/W single-emulsion droplets. These hydrogel-encased photonic microspheres show promise as structural colorants in water-based inks and polymer composites.

Fast Gas-Adsorption Kinetics in Supraparticle-Based MOF Packings with Hierarchical Porosity

Metal-organic frameworks (MOFs) are microporous adsorbents for high-throughput gas separation. Such materials exhibit distinct adsorption characteristics owing to the flexibility of the crystal framework in a nanoparticle, which can be different from its bulk crystal. However, for practical applications, such particles need to be compacted into macroscopic pellets, creating mass-transport limitations. In this work, this problem is addressed by forming materials with structural hierarchy, using a supraparticle-based approach. Spherical supraparticles composed of nanosized MOF particles are fabricated by emulsion templating and they are used as the structural component forming a macroscopic material. Zeolitic imidazolate framework-8 (ZIF-8) particles are used as a model system and the gas-adsorption kinetics of the hierarchical material are compared with conventional pellets without structural hierarchy. It is demonstrated that a pellet packed with supraparticles exhibits a 30 times faster adsorption rate compared to an unstructured ZIF-8 powder pellet. These results underline the importance of controlling structural hierarchy to maximize the performance of existing materials. In the hierarchical MOFs, large macropores between the supraparticles, smaller macropores between individual ZIF-8 primary particles, and micropores inherent to the ZIF-8 framework collude to combine large surface area, defined adsorption sites, and efficient mass transport to enhance performance.

Centrifugation-Assisted Growth of Single-Crystalline Grains in Microcapsules

Colloidal crystals have been tailored in a format of microspheres to use them as a building block to construct macroscopic photonic surfaces. However, the polycrystalline grains grown from the spherical surface usually exhibit low reflectivity. Although single-crystalline microspheres have been produced, it is difficult to control the crystal orientation. Here, we design spherical microcapsules with density anisotropy that contain single-crystalline grains along the heavy side. The microcapsules spontaneously align to have a heavy side down under the action of gravity and display a bright and uniform reflection color from the entire surface of the grains. Key to the success is the use of gentle centrifugal force to initiate nucleation and grow single-crystalline grains from the heavy side through depletion attraction. The microcapsules have density anisotropy due to the heterogeneity of the shell thickness, which causes them to self-align under centrifugation. At the same time, particles are accumulated on the heavy side, which produces many tiny grains on the heavy side immediately after the centrifugation. With controlled depletion attraction among particles, only a few grains survive during postincubation through Ostwald ripening, and one or a few giant single-crystalline grains are finally produced along the heavy side of each microcapsule.

Designing photonic microparticles with droplet microfluidics

Photonic materials with a periodic change of refractive index show unique optical properties through wavelength-selective diffraction and modulation of the optical density of state, which is promising for various optical applications. In particular, photonic structures have been produced in the format of microparticles using emulsion templates to achieve advanced properties and applications beyond those of a conventional film format. Photonic microparticles can be used as a building block to construct macroscopic photonic materials, and the individual microparticles can serve as miniaturized photonic devices. Droplet microfluidics enables the production of emulsion drops with a controlled size, composition, and configuration that serve as the optimal confining geometry for designing photonic microparticles. This feature article reviews the recent progress and current state of the art in the field of photonic microparticles, covering all aspects of microfluidic production methods, microparticle geometries, optical properties, and applications. Two distinct bottom-up approaches based on colloidal assembly and liquid crystals are, respectively, discussed and compared.

Multiple Scattering and Random Quasi-Phase-Matching in Disordered Assemblies of LiNbO3 Nanocubes

Nonlinear disordered photonic media (NDPM), composed of a random configuration of noncentrosymmetric crystals, offer a versatile platform to tailor nonlinear optical effects. The second-harmonic generation (SHG) and its random quasi-phase-matching (RQPM) in the multiple scattering regime are still poorly explored. In this work, we bottom-up assemble NDPM in two different geometries by using LiNbO₃ nanocubes as building blocks and investigate both the multiple scattering and the nonlinear properties. We produce disordered slabs with a continuously variable thickness and microspheres with different diameters, which display a remarkable strong light scattering, evidenced by a subwavelength transport mean free path (). We first provide explicit evidence that the SHG power scales linearly with both the thickness of the slab and the volume of the microspheres. These observations generalize the characteristic linear scaling of RQPM power with the volume to the multiple scattering regime and to different sample geometries. Our structures represent a promising platform to investigate the interplay between disorder and optical nonlinear effects.

Coloration in Supraparticles Assembled from Polyhedral Metal-Organic Framework Particles

Supraparticles are spherical colloidal crystals prepared by confined self‐assembly processes. A particularly appealing property of these microscale structures is the structural color arising from interference of light with their building blocks. Here, we assemble supraparticles with high structural order that exhibit coloration from uniform, polyhedral metal–organic framework (MOF) particles. We analyse the structural coloration as a function of the size of these anisotropic building blocks and their internal structure. We attribute the angle‐dependent coloration of the MOF supraparticles to the presence of ordered, onion‐like layers at the outermost regions. Surprisingly, even though different shapes of the MOF particles have different propensities to form these onion layers, all supraparticle dispersions show well‐visible macroscopic coloration, indicating that local ordering is sufficient to generate interference effects.

Photonic Microbeads Templated by Oil-in-Oil Emulsion Droplets for High Saturation of Structural Colors

Photonic microbeads containing crystalline colloidal arrays are promising as a key component of structural-color inks for various applications including printings, paintings, and cosmetics. However, structural colors from microbeads usually have low color saturation and the production of the beads requires delicate and time-consuming protocols. Herein, elastic photonic microbeads are designed with enhanced color saturation through facile photocuring of oil-in-oil emulsion droplets. Dispersions of highly-concentrated silica particles in elastomer precursors are microfluidically emulsified into immiscible oil to produce monodisperse droplets. The silica particles spontaneously form crystalline arrays in the entire volume of the droplets due to interparticle repulsion which is unperturbed by the diffusion of the surrounding oil whereas weakened for oil-in-water droplets. The crystalline arrays are permanently stabilized by photopolymerization of the precursor, forming elastic photonic microbeads. The microbeads are transferred into the refractive-index-matched biocompatible oil. The high crystallinity of colloidal arrays increases the reflectivity at stopband and the index matching reduces incoherent scattering at the surface of the microbeads, enhancing color saturation. The colors can be adjusted by mixing two distinctly colored microbeads. Also, low stiffness and high elasticity reduce foreign-body sensation and enhance fluidity, potentially serving as pragmatic structural colorants for photonic inks.

Co-Assembly of Colloids and Eumelanin Nanoparticles in Droplets for Structural Pigments with High Saturation

Colloidal crystals have been used to develop structural colors. However, incoherent scattering causes the colors to turn whitish, reducing the color saturation. To overcome the problem, light-absorbing additives have been incorporated. Although various additives have been used, most of them are not compatible with a direct co-assembly with common colloids in aqueous suspensions. Here, the authors suggest eumelanin nanoparticles as a new additive to enhance the color chroma. Eumelanin nanoparticles are synthesized to have diameters of several nanometers by oxidative polymerization of precursors in basic solutions. The nanoparticles carry negative charges and do not weaken the electrostatic repulsion among same-charged polystyrene particles when they are added to aqueous suspensions. To prove the effectiveness of eumelanin as a saturation enhancer, the authors produce photonic balls through direct co-assembly of polystyrene and eumelanin using water-in-oil emulsion droplets, while varying the weight ratio of eumelanin to polystyrene. The high crystallinity of colloidal crystals is preserved for the ratio up to at least 1/50 as the eumelanin does not perturb the crystallization. The eumelanin effectively suppresses incoherent scattering while maintaining the strength of structural resonance at an optimum ratio, improving color chroma without compromising brightness.

Influence of Surfactant-Mediated Interparticle Contacts on the Mechanical Stability of Supraparticles

Colloidal supraparticles are micron-scale spherical assemblies of uniform primary particles, which exhibit emergent properties of a colloidal crystal, yet exist as a dispersible powder. A prerequisite to utilize these emergent functionalities is that the supraparticles maintain their mechanical integrity upon the mechanical impacts that are likely to occur during processing. Understanding how the internal structure relates to the resultant mechanical properties of a supraparticle is therefore of general interest. Here, we take the example of supraparticles templated from water/fluorinated oil emulsions in droplet-based microfluidics and explore the effect of surfactants on their mechanical properties. Stable emulsions can be generated by nonionic block copolymers consisting of a hydrophilic and fluorophilic block and anionic fluorosurfactants widely available under the brand name Krytox. The supraparticles formed in the presence of both types of surfactants appear structurally similar, but differ greatly in their mechanical properties. While the nonionic surfactant induces superior mechanical stability and ductile fracture behavior, the anionic Krytox surfactant leads to weak supraparticles with brittle fracture. We complement this macroscopic picture with Brillouin light spectroscopy that is very sensitive to the interparticle contacts for subnanometer-thick adsorbed layers atop of the nanoparticle. While the anionic Krytox does not significantly affect the interparticle bonds, the amphiphilic nonionic surfactant drastically strengthens these bonds to the point that individual particle vibrations are not resolved in the experimental spectrum. Our results demonstrate that seemingly subtle changes in the physicochemical properties of supraparticles can drastically impact the resultant mechanical properties.

Reflectance Confocal Microscopy: A Powerful Tool for Large Scale Characterization of Ordered/Disordered Morphology in Colloidal Photonic Structures

The development of appropriate methods to correlate the structure and optical properties of colloidal photonic structures is still a challenge. Structural information is mostly obtained by electron, X-ray, or optical microscopy methods and X-ray diffraction, while bulk spectroscopic methods and low resolution bright-field microscopy are used for optical characterization. Here, we describe the use of reflectance confocal microscopy as a simple and intuitive technique to provide a direct correlation between the ordered/disordered structural morphology of colloidal crystals and glasses, and their corresponding optical properties.

Functional Micro-/Nanomaterials for Multiplexed Biodetection

When analyzing biological phenomena and processes, multiplexed biodetection has many advantages over single-factor biodetection and is highly relevant to both human health issues and advancements in the life sciences. However, many key problems with current multiplexed biodetection strategies remain unresolved. Herein, the main issues are analyzed and summarized: 1) generating sufficient signal to label targets, 2) improving the signal-to-noise ratio to ensure total detection sensitivity, and 3) simplifying the detection process to reduce the time and labor costs of multiple target detection. Then, available solutions made possible by designing and controlling the properties of micro- and nanomaterials are introduced. The aim is to emphasize the role that micro-/nanomaterials can play in the improvement of multiplexed biodetection strategies. Through analyzing existing problems, introducing state-of-the-art developments regarding relevant materials, and discussing future directions of the field, it is hopeful to help promote necessary developments in multiplexed biodetection and associated scientific research.

From colloidal particles to photonic crystals: advances in self-assembly and their emerging applications

Over the last three decades, photonic crystals (PhCs) have attracted intense interests thanks to their broad potential applications in optics and photonics. Generally, these structures can be fabricated via either "top-down" lithographic or "bottom-up" self-assembly approaches. The self-assembly approaches have attracted particular attention due to their low cost, simple fabrication processes, relative convenience of scaling up, and the ease of creating complex structures with nanometer precision. The self-assembled colloidal crystals (CCs), which are good candidates for PhCs, have offered unprecedented opportunities for photonics, optics, optoelectronics, sensing, energy harvesting, environmental remediation, pigments, and many other applications. The creation of high-quality CCs and their mass fabrication over large areas are the critical limiting factors for real-world applications. This paper reviews the state-of-the-art techniques in the self-assembly of colloidal particles for the fabrication of large-area high-quality CCs and CCs with unique symmetries. The first part of this review summarizes the types of defects commonly encountered in the fabrication process and their effects on the optical properties of the resultant CCs. Next, the mechanisms of the formation of cracks/defects are discussed, and a range of versatile fabrication methods to create large-area crack/defect-free two-dimensional and three-dimensional CCs are described. Meanwhile, we also shed light on both the advantages and limitations of these advanced approaches developed to fabricate high-quality CCs. The self-assembly routes and achievements in the fabrication of CCs with the ability to open a complete photonic bandgap, such as cubic diamond and pyrochlore structure CCs, are discussed as well. Then emerging applications of large-area high-quality CCs and unique photonic structures enabled by the advanced self-assembly methods are illustrated. At the end of this review, we outlook the future approaches in the fabrication of perfect CCs and highlight their novel real-world applications.

Biomimetic design of photonic materials for biomedical applications

Photonic crystal (PC) materials with bio-inspired structure colors have drawn increasing attention as their potentials have been rapidly progressed in the field of biomedicine. After elaborate integration with smart materials or preparations through advanced techniques, PC materials have shown significant advantages in biosensing, bio-probing, bio-screening, tissue engineering, and so forth. In this review, we first introduced the fundamentals of PC materials as well as their fabrication strategies with different dimensional outputs. Based on these diversified PC materials, their biomedical potentials as biosensing elements, cell carriers, drug delivery systems, screening methods, cell scaffolds for tissue engineering, cell imaging probes, as well as the monitoring means for biological processes were then highlighted. In addition to these, we finally listed and discussed some emerging applications of PCs integrated with functional materials and newly developed material engineering technologies. In short, this review will provide a panoramic view of PCs-based biomedicines, and moreover, the progressive discussions from fundamentals to advanced applications in this review may also encourage researchers to innovate PC materials or devices for broader biomedical applications.

Controlling the Large-Scale Fabrication of Supraparticles

Controlling the nanoscale interactions of colloidal building blocks is a key step for the transition from single nanoparticles to tailor-made, architected morphologies and their further integration into functional materials. Solvent evaporation-induced self-assembly within emulsion droplets emerges as a fast, versatile, and low-cost approach to obtain spherical, complex structures, such as supraparticles. Nevertheless, some process-structure relationships able to describe the effects of emulsion conditions on the synthesis outcomes still remain to be understood. Here, we explore the effect of different physicochemical parameters of emulsion-templated self-assembly (ETSA) on supraparticles' formation. Supraparticle size, size dispersity, microporosity, and sample homogeneity are rationalized based on the used surfactant formulation, stabilization mechanism, and viscosity of the emulsion. We further demonstrate the significance of the parameters found by optimizing a transferable, large-scale (gram-size) ETSA setup for the controlled synthesis of spherical supraparticles in a range of defined sizes (from 0.1-10 μm). Ultimately, our results provide new key synthetic parameters able to control the process, promoting the development of supraparticle-based, functional nanomaterials for a wide range of applications.

Photonic Janus Balls with Controlled Magnetic Moment and Density Asymmetry

Colloidal crystals show structural colors through wavelength-selective diffraction at photonic stopbands. Here, we design photonic Janus balls with a controlled magnetic moment for programmable structural color switching. The Janus balls are produced from microfluidically produced paired drops of two distinct photocurable resins. The lighter resin contains magnetic nanoparticles and carbon black, whereas heavier one contains silica particles at a high volume fraction. The paired drops spontaneously align vertically due to the density asymmetry. The magnetic moment is assigned in the vertically aligned drops by aligning magnetic nanoparticles with an external field and capturing them through photopolymerization. Silica particles in the heavier compartment spontaneously form crystalline arrays due to interparticle repulsion, developing structural colors. The resulting photonic Janus balls vertically align without an external field, like a roly-poly toy, so that carbon-black-laden compartments face upward. With an external magnetic field, the Janus balls align their magnetic moment to the field and display structural colors. Importantly, the direction of the magnetic moment is set by the direction of the external field during photopolymerization, which enables the simultaneous manipulation of orientations of distinct photonic Janus balls in a programmed manner. These photonic Janus balls are potentially useful as active color inks for anti-counterfeiting tags.

Colloidal assembly in droplets: structures and optical properties

Colloidal assembly in emulsion drops provides fundamental tools for studying optimum particle arrangement under spherical confinement and practical means for producing photonic microparticles. Recent progress has revealed that energetically favored cluster configurations are different from conventional supraballs, which could enhance optical performance. This paper reviews state-of-the-art emulsion-templated colloidal clusters, and particularly focuses on recently reported novel structures such as icosahedral, decahedral, and single-crystalline face-centered cubic (fcc) clusters. We classify the clusters according to the number of component particles as small (N < O(10²)), medium (O(10²) ≤N≤O(10⁴)), and large (N≥O(10⁵)). For each size of clusters, we discuss the detailed structures, mechanisms of cluster formation, and optical properties and potential applications. Finally, we outline current challenges and questions that require further investigation.

Optical Characterization of the Photonic Ball as a Structurally Colored Pigment

A photonic ball is a spherical colloidal crystal. Because it can exhibit vivid structural colors, many attempts have been made to apply it as a structurally colored pigment. However, the optical properties of the photonic ball are complicated because different crystal planes can be involved in the coloration mechanism, depending on the size of the constituent colloidal particles. In this paper, we report a comparative study of photonic balls consisting of silica particles with sizes ranging from 220 to 500 nm. We first analyze the reflectance spectra acquired in a nearly backscattering geometry and confirm that Bragg diffraction from different crystal planes causes several spectral peaks. Second, the angular dependence of reflection is experimentally characterized and theoretically analyzed with appropriate models. These analyses and a comparison with a planar colloidal crystal reveal that the spherical shape plays an essential role in the minor iridescence of photonic balls. We finally discuss a method to enhance color saturation by incorporating small light-absorbing particles. We also discuss the iridescence of the photonic ball under directional and ambient illumination conditions.

Colloidal Crystals from Microfluidics

Colloidal crystals are of great interest to researchers because of their excellent optical properties and broad applications in barcodes, sensors, displays, drug delivery, and other fields. Therefore, the preparation of high quality colloidal crystals in large quantities with high speed is worth investigating. After decades of development, microfluidics have been developed that provide new choices for many fields, especially for the generation of functional materials in microscale. Through the design of microfluidic chips, colloidal crystals can be prepared controllably with the advantages of fast speed and low cost. In this Review, research progress on colloidal crystals from microfluidics is discussed. After summarizing the classifications, the generation of colloidal crystals from microfluidics is discussed, including basic colloidal particles preparation, and their assembly inside or outside of microfluidic devices. Then, applications of the achieved colloidal crystals from microfluidics are illustrated. Finally, the future development and prospects of microfluidic-based colloidal crystals are summarized.

Fabrication of Spherical Titania Inverse Opal Structures Using Electro-Hydrodynamic Atomization

Spherical PS/HEMA opal structure and spherical titania inverse opal structure were fabricated by self-assembly of colloidal nanoparticles in uniform aerosol droplets generated with electro-hydrodynamic atomization method. When a solution of PS/HEMA nanoparticles with uniform size distribution was used, PS/HEMA nanoparticles self-assembled into a face-centered cubic (FCC) structure by capillary force with the evaporation of the solvent in aerosol droplet, resulting in a spherical opal structure. When PS/HEMA nanoparticles and anatase titania nanoparticles were dispersed simultaneously into the solution, titania nanoparticles with relatively smaller size were assembled at the interstitial site of PS/HEMA nanoparticles packed in the FCC structure, resulting in a spherical opal composite structure. Spherical titania inverse opal structure was fabricated after removing PS/HEMA nanoparticles from the spherical opal composite structure by calcination.

Self-assembly of colloids based on microfluidics

Self-assembly of colloids provides a powerful way for the construction of complex multi-scale materials. Microfluidic techniques possess great potential to precisely control the assembly of micro- and nano-scale building blocks via the rational design of various microfluidic environments. In this review, we first discuss the self-assembly of colloids without templates by using the laminar microfluidic technique. The self-assembly of colloids based on a droplet as a template was subsequently summarized and discussed via droplet microfluidic technique. Moreover, the evaporation-driven self-assembly of colloids in microfluidic channels has been discussed and analysed. Finally, the representative applications in this field have been pointed out. The aim of this review is to summarize the state-of-art on the self-assembly of colloids based on various microfluidic techniques, exhibit their representative applications, and point out the current challenges in this field, hoping to inspire and guide future work.

Free Energy Landscape of Colloidal Clusters in Spherical Confinement

The structure of finite self-assembling systems depends sensitively on the number of constituent building blocks. Recently, it was demonstrated that hard sphere-like colloidal particles show a magic number effect when confined in emulsion droplets. Geometric construction rules permit a few dozen magic numbers that correspond to a discrete series of completely filled concentric icosahedral shells. Here, we investigate the free energy landscape of these colloidal clusters as a function of the number of their constituent building blocks for system sizes up to several thousand particles. We find that minima in the free energy landscape, arising from the presence of filled, concentric shells, are significantly broadened, compared to their atomic analogues. Colloidal clusters in spherical confinement can flexibly accommodate excess particles by ordering icosahedrally in the cluster center while changing the structure near the cluster surface. In between these magic number regions, the building blocks cannot arrange into filled shells. Instead, we observe that defects accumulate in a single wedge and therefore only affect a few tetrahedral grains of the cluster. We predict the existence of this wedge by simulation and confirm its presence in experiment using electron tomography. The introduction of the wedge minimizes the free energy penalty by confining defects to small regions within the cluster. In addition, the remaining ordered tetrahedral grains can relax internal strain by breaking icosahedral symmetry. Our findings demonstrate how multiple defect mechanisms collude to form the complex free energy landscape of colloidal clusters.

Photonic Microcapsules Containing Single-Crystal Colloidal Arrays with Optical Anisotropy

Colloidal particles with a repulsive interparticle potential spontaneously form crystalline lattices, which are used as a motif for photonic materials. It is difficult to predict the crystal arrangement in spherical volume as lattices are incompatible with a spherical surface. Here, the optimum arrangement of charged colloids is experimentally investigated by encapsulating them in double-emulsion drops. Under conditions of strong interparticle repulsion, the colloidal crystal rapidly grows from the surface toward the center of the microcapsule, forming an onion-like arrangement. By contrast, for weak repulsion, crystallites slowly grow and fuse through rearrangement to form a single-crystal phase. Single-crystal structure is energetically favorable even for strong repulsion. Nevertheless, a high energy barrier to colloidal rearrangement kinetically arrests the onion-like structure formed by heterogeneous nucleation. Unlike the isotropic onion-shaped product, the anisotropic single-crystal-containing microcapsules selectively display-at certain orientations but not others-one of the distinct colors from the various crystal planes.

Stimuli-Responsive Optical Nanomaterials

Responsive optical nanomaterials that can sense and translate various external stimuli into optical signals, in the forms of observable changes in appearance and variations in spectral line shapes, are among the most active research topics in nanooptics. They are intensively exploited within the regimes of the four classic optical phenomena-diffraction in photonic crystals, absorption of plasmonic nanostructures, as well as color-switching systems, refraction of assembled birefringent nanostructures, and emission of photoluminescent nanomaterials and molecules. Herein, a comprehensive review of these research activities regarding the fundamental principles and practical strategies is provided. Starting with an overview of their substantial developments during the latest three decades, each subtopic discussion is led with fundamental theories that delineate the correlation between nanostructures and optical properties and the delicate research strategies are elaborated with specific attention focused on working principles and optical performances. The unique advantages and inherent limitations of each responsive optical nanoscale platform are summarized, accompanied by empirical criteria that should be met and perspectives on research opportunities where the developments of next-generation responsive optical nanomaterials might be directed.

Magic number colloidal clusters as minimum free energy structures

Clusters in systems as diverse as metal atoms, virus proteins, noble gases, and nucleons have properties that depend sensitively on the number of constituent particles. Certain numbers are termed ‘magic’ because they grant the system with closed shells and exceptional stability. To this point, magic number clusters have been exclusively found with attractive interactions as present between atoms. Here we show that magic number clusters exist in a confined soft matter system with negligible interactions. Colloidal particles in an emulsion droplet spontaneously organize into a series of clusters with precisely defined shell structures. Crucially, free energy calculations demonstrate that colloidal clusters with magic numbers possess higher thermodynamic stability than those off magic numbers. A complex kinetic pathway is responsible for the efficiency of this system in finding its minimum free energy configuration. Targeting similar magic number states is a strategy towards unique configurations in finite self-organizing systems across the scales.

Magic number cluster with closed shells and increased stability often result from potential energy minimization between attractive atoms or particles. Here, Wang et al. show that such magic number clusters can also result from entropy maximization in colloidal systems with negligible interactions.

Photonic Capsule Sensors with Built-In Colloidal Crystallites

Technologies to monitor microenvironmental conditions and its spatial distribution are in high demand, yet remain unmet need. Herein, photonic microsensors are designed in a capsule format that can be injected, suspended, and implanted in any target volume. Colorimetric sensors are loaded in the core of microcapsules by assembling core-shell colloids into crystallites through the depletion attraction. The shells of the colloids are made of a temperature-responsive hydrogel, which enables the crystallites to rapidly and widely tune the structural color in response to a change in temperature while maintaining close-packed arrays. The spherical symmetry of the microcapsules renders them optically isotropic, i.e., displaying orientation-independent color. In addition, as a solid membrane is used to protect the delicate crystallites from external stresses, their high stability is assured. More importantly, each microcapsule reports the temperature of its microenvironment so that a suspension of capsules can provide information on the spatial distribution of the temperature.

Bioinspired Photonic Pigments from Colloidal Self-Assembly

The natural world is a colorful environment. Stunning displays of coloration have evolved throughout nature to optimize camouflage, warning, and communication. The resulting flamboyant visual effects and remarkable dynamic properties, often caused by an intricate structural design at the nano- and microscale, continue to inspire scientists to unravel the underlying physics and to recreate the observed effects. Here, the methodologies to create bioinspired photonic pigments using colloidal self-assembly approaches are considered. The physics governing the interaction of light with structural features and natural examples of structural coloration are briefly introduced. It is then outlined how the self-assembly of colloidal particles, acting as wavelength-scale building blocks, can be particularly useful to replicate coloration from nature. Different coloration effects that result from the defined structure of the self-assembled colloids are introduced and it is highlighted how these optical properties can be translated into photonic pigments by modifications of the assembly processes. The importance of absorbing elements, as well as the role of surface chemistry and wettability to control structural coloration is discussed. Finally, approaches to integrate dynamic control of coloration into such self-assembled photonic pigments are outlined.

Supraparticles: Functionality from Uniform Structural Motifs

Under the right process conditions, nanoparticles can cluster together to form defined, dispersed structures, which can be termed supraparticles. Controlling the size, shape, and morphology of such entities is a central step in various fields of science and technology, ranging from colloid chemistry and soft matter physics to powder technology and pharmaceutical and food sciences. These diverse scientific communities have been investigating formation processes and structure/property relations of such supraparticles under completely different boundary conditions. On the fundamental side, the field is driven by the desire to gain maximum control of the assembly structures using very defined and tailored colloidal building blocks, whereas more applied disciplines focus on optimizing the functional properties from rather ill-defined starting materials. With this review article, we aim to provide a connecting perspective by outlining fundamental principles that govern the formation and functionality of supraparticles. We discuss the formation of supraparticles as a result of colloidal properties interplaying with external process parameters. We then outline how the structure of the supraparticles gives rise to diverse functional properties. They can be a result of the structure itself (emergent properties), of the colocalization of different, functional building blocks, or of coupling between individual particles in close proximity. Taken together, we aim to establish structure-property and process-structure relationships that provide unifying guidelines for the rational design of functional supraparticles with optimized properties. Finally, we aspire to connect the different disciplines by providing a categorized overview of the existing, diverging nomenclature of seemingly similar supraparticle structures.

Micro to Nanoscale Engineering of Surface Precipitates Using Reconfigurable Contact Lines

Nanoscale engineering has traditionally adopted the chemical route of synthesis or optochemical techniques such as lithography requiring large process times, expensive equipment, and an inert environment. Directed self-assembly using evaporation of nanocolloidal droplet can be a potential low-cost alternative across various industries ranging from semiconductors to biomedical systems. It is relatively simple to scale and reorient the evaporation-driven internal flow field in an evaporating droplet which can direct dispersed matter into functional agglomerates. The resulting functional precipitates not only exhibit macroscopically discernible changes but also nanoscopic variations in the particulate assembly. Thus, the evaporating droplet forms an autonomous system for nanoscale engineering without the need for external resources. In this article, an indigenous technique of interfacial re-engineering, which is both simple and inexpensive to implement, is developed. Such re-engineering widens the horizon for surface patterning previously limited by the fixed nature of the droplet interface. It involves handprinting hydrophobic lines on a hydrophilic substrate to form a confinement of any selected geometry using a simple document stamp. Droplets cast into such confinements get modulated into a variety of shapes. The droplet shapes control the contact line behavior, evaporation dynamics, and complex internal flow pattern. By exploiting the dynamic interplay among these variables, we could control the deposit's macro- as well as nanoscale assembly not possible with simple circular droplets. We provide a detailed mechanism of the coupling at various length scales enabling a predictive capability in custom engineering, particularly useful in nanoscale applications such as photonic crystals.

Bottom-Up Assembly of Silica and Bioactive Glass Supraparticles with Tunable Hierarchical Porosity

We investigate the formation of spherical supraparticles with controlled and tunable porosity on the nanometer and micrometer scales using the self-organization of a binary mixture of small (nanometer scale) oxidic particles with large (micrometer scale) polystyrene particles in the confinement of an emulsion droplet. The external confinement determines the final, spherical structure of the hybrid assembly, while the small particles form the matrix material. The large particles act as templating porogens to create micropores after combustion at elevated temperatures. We control the pore sizes on the micrometer scale by varying the size of the coassembled polystyrene microspheres and produce supraparticles from both silica- and calcium-containing CaO/SiO₂ particles. Although porous supraparticles are obtained in both cases, we found that the presence of calcium ions substantially complicated the fabrication process since the increased ionic strength of the dispersion compromises the colloidal stability during the assembly process. We minimized these stability issues via the addition of a steric stabilizing agent and by mixing bioactive and silica colloidal particles. We investigated the interaction of the porous particles with bone marrow stromal cells and found an increase in cell attachment with increasing pore size of the self-assembled supraparticles.

Electrically and electrohydrodynamically driven phase transition and structural color switching of oligomer tethered 2D colloid

The structural color in 2D nanoparticle colloid photonic crystal can be switched by using both electrohydrodynamic flow and Maxwell–Wagner polarization.

Bioinspired bright noniridescent photonic melanin supraballs

Structural colors enable the creation of a spectrum of nonfading colors without pigments, potentially replacing toxic metal oxides and conjugated organic pigments. However, significant challenges remain to achieve the contrast needed for a complete gamut of colors and a scalable process for industrial application. We demonstrate a feasible solution for producing structural colors inspired by bird feathers. We have designed core-shell nanoparticles using high-refractive index (RI) (~1.74) melanin cores and low-RI (~1.45) silica shells. The design of these nanoparticles was guided by finite-difference time-domain simulations. These nanoparticles were self-assembled using a one-pot reverse emulsion process, which resulted in bright and noniridescent supraballs. With the combination of only two ingredients, synthetic melanin and silica, we can generate a full spectrum of colors. These supraballs could be directly added to paints, plastics, and coatings and also used as ultraviolet-resistant inks or cosmetics.

Hierarchically structured photonic crystals for integrated chemical separation and colorimetric detection

A SiO₂ colloidal photonic crystal film with a hierarchical porous structure is fabricated to demonstrate an integrated separation and colorimetric detection of chemical species for the first time. This new photonic crystal based thin layer chromatography process requires no dyeing, developing and UV irradiation compared to the traditional TLC. The assembling of mesoporous SiO₂ particles via a supersaturation-induced-precipitation process forms uniform and hierarchical photonic crystals with micron-scale cracks and mesopores, which accelerate the diffusion of developers and intensify the adsorption/desorption between the analytes and silica for efficient separation. Meanwhile, the chemical substances infiltrated to the voids of photonic crystals cause an increase of the refractive index and a large contrast of structural colors towards the unloaded part, so that the sample spots can be directly recognized with the naked eye before and after separation.

Macroporous materials: microfluidic fabrication, functionalization and applications

This article provides an up-to-date highly comprehensive overview (594 references) on the state of the art of the synthesis and design of macroporous materials using microfluidics and their applications in different fields.

Selective protein trapping within hybrid nanowells

Nanostructured surfaces offer a great deal in view of the control of biological processes at subcellular level. An innovative methodology has been developed to fabricate large-scale hexagonally close-packed arrays of polymer/gold nanowells of tunable diameter and depth, ranging between about 70 and 100 nm (diameter) and 15 and 40 nm (depth). Nanowell volumes down to 0.3 attolitres and nanowell densities as high as ∼10(9) wells per cm(2) could also be demonstrated. The present paper investigates the main features of protein trapping processes within the obtained nanowell arrays. Selective protein trapping, also involving orientation and biofunctionality changes, appears to be induced by the nanoconfinement. Nanomorphology measurements and antibody preferential linkages are demonstrated for human serum albumin versus lysozyme, the first being efficiently trapped within the nanocavities and the second being preferentially deposited outside them. The selective protein-dependent trapping/untrapping within the nanowells is discussed in terms of the variation in the out-diffusion coefficients of the biomolecules entering the nanowells, either as a function of the matching/mismatching of the biomolecules and nanocavity dimensions, or, alternatively, owing to the drastic conformational changes due to nanoconfinement. In this case, the trapping of large and soft human serum albumin is privileged with respect to the small and hard lysozyme. Furthermore, the observed peculiar antibody response to the confined proteins is accounted for in terms of the enhancement of their biological response following the modified accessibility of the key epitopes, which in turn suggests drastic conformational changes.

Brilliant Structurally Colored Films with Invariable Stop-Band and Enhanced Mechanical Robustness Inspired by the Cobbled Road

Recently, structural colors have attracted great concentrations because the coloration is free from chemical- or photobleaching. However, the color saturation and mechanical robustness are generally competitive properties in the fabrication of PCs (photonic crystals) films. Besides, the structure of PCs and their derivatives are easy to be invaded by liquids and lead to band gap shifts due to the change of refractive index or periodicity. To solve those problems, we infiltrate polydimethylsiloxane (PDMS) into the intervals between regularly arrayed hollow SiO2 nanospheres, inspired by the cobbled road prepared by embedding stone in the bulk cement matrix. Consequently, the as-prepared PCs films show brilliant colors, invariable stop-bands, and excellent mechanical robustness. Moreover, the water contact angle even reached 166° after a sandpaper abrasion test. The combination of brilliant colors, invariable stop-bands, and excellent robustness is significant for potential application in paint and external decoration of architectures.

Recent advances in the biomimicry of structural colours

Nature has mastered the construction of nanostructures with well-defined macroscopic effects and purposes. Structural colouration is a visible consequence of the particular patterning of a reflecting surface with regular structures at submicron length scales. Structural colours usually appear bright, shiny, iridescent or with a metallic look, as a result of physical processes such as diffraction, interference, or scattering with a typically small dissipative loss. These features have recently attracted much research effort in materials science, chemistry, engineering and physics, in order to understand and produce structural colours. In these early stages of photonics, researchers facing an infinite array of possible colour-producing structures are heavily inspired by the elaborate architectures they find in nature. We review here the recent technological strategies employed to artificially mimic the structural colours found in nature, as well as some of their current and potential applications.

A colloidoscope of colloid-based porous materials and their uses

Colloids assemble into a variety of bioinspired structures for applications including optics, wetting, sensing, catalysis, and electrodes.

Design of lipidic platforms anchored within nanometric cavities by peptide hooks

A stable confinement of liposomes within arrays of hybrid polymer/Au nanocavities was achieved using peptide hooks covalently linked to the Au floor.