Aryl Hydroxylation from a Mononuclear Copper-Hydroperoxo Species

A nucleotide-copper(II) complex possessing a monooxygenase-like catalytic function

The de novo design of artificial biocatalysts with enzyme-like active sites and catalytic functions has long been an attractive yet challenging goal. In this study, we present a nucleotide-Cu²⁺ complex, synthesized through a one-pot approach, capable of catalyzing ortho-hydroxylation reactions resembling those of minimalist monooxygenases. Both experimental and theoretical findings demonstrate that the catalyst, in which Cu²⁺ coordinates with both the nucleobase and phosphate moieties, forms a ternary-complex intermediate with H₂O₂ and tyramine substrates through multiple weak interactions. The subsequent electron transfer and hydrogen (or proton) transfer steps lead to the ortho-hydroxylation of tyramine, where the single copper center exhibits a similar function to natural dicopper sites. Moreover, Cu²⁺ bound to nucleotides or oligonucleotides exhibits thermophilic catalytic properties within the temperature range of 25 °C to 75 °C, while native enzymes are fully deactivated above 35 °C. This study may provide insights for the future design of oxidase-mimetic catalysts and serve as a guide for the design of primitive metallocentre-dependent enzymes.

Selective oxygenation of C-H and CC bonds with H2O2 by high-spin cobalt(II)-carboxylate complexes

Four cobalt(II)-carboxylate complexes [(6-Me₃-TPA)Co^II(benzoate)](BPh₄) (1), [(6-Me₃-TPA)Co^II(benzilate)](ClO₄) (2), [(6-Me₃-TPA)Co^II(mandelate)](BPh₄) (3), and [(6-Me₃-TPA)Co^II(MPA)](BPh₄) (4) (HMPA = 2-methoxy-2-phenylacetic acid) of the 6-Me₃-TPA (tris((6-methylpyridin-2-yl)methyl)amine) ligand were isolated to investigate their ability in H₂O₂-dependent selective oxygenation of C-H and CC bonds. All six-coordinate complexes contain a high-spin cobalt(II) center. While the cobalt(II) complexes are inert toward dioxygen, each of these complexes reacts readily with hydrogen peroxide to form a diamagnetic cobalt(III) species, which decays with time leading to the oxidation of the methyl groups on the pyridine rings of the supporting ligand. Intramolecular ligand oxidation by the cobalt-based oxidant is partially inhibited in the presence of external substrates, and the substrates are converted to their corresponding oxidized products. Kinetic studies and labelling experiments indicate the involvement of a metal-based oxidant in affecting the chemo- and stereo-selective catalytic oxygenation of aliphatic C-H bonds and epoxidation of alkenes. An electrophilic cobalt-oxygen species that exhibits a kinetic isotope effect (KIE) value of 5.3 in toluene oxidation by 1 is proposed as the active oxidant. Among the complexes, the cobalt(II)-benzoate (1) and cobalt(II)-MPA (4) complexes display better catalytic activity compared to their α-hydroxy analogues (2 and 3). Catalytic studies with the cobalt(II)-acetonitrile complex [(6-Me₃-TPA)Co^II(CH₃CN)₂](ClO₄)₂ (5) in the presence and absence of externally added benzoate support the role of the carboxylate co-ligand in oxidation reactions. The proposed catalytic reaction involves a carboxylate-bridged dicobalt complex in the activation of H₂O₂ followed by the oxidation of substrates by a metal-based oxidant.

ESI and tandem MS for mechanistic studies with high-valent transition metal species

The analysis of high-valent metal species has been in the focus of research for over 20 years. Mass spectrometry (MS) represents a technique routinely used for their characterization, in particular...

Oxygen-atom transfer photochemistry of a molecular copper bromate complex

We report the synthesis and oxygen-atom transfer (OAT) photochemistry of [Cu(tpa)BrO3]ClO4.

Cu-promoted intramolecular hydroxylation of CH bonds using directing groups with varying denticity

In this research article, we describe the Cu-promoted intramolecular hydroxylation of sp² and sp³ CH bonds using directing groups with varying denticity (bi-, tri- and tetradentate) and natural oxidants (O₂ and H₂O₂). We found that bidentate directing groups, in combination with Cu and H₂O₂, led to high hydroxylation yields. On the other hand, tetradentate directing groups did not form the hydroxylation products. Our mechanistic investigations suggest that bidentate directing groups allow for generating reactive mononuclear copper(II) hydroperoxide intermediates while tetradentate systems form dinuclear Cu₂O₂ species that do not oxidize CH bonds. Our findings might shed light on the reaction mechanism(s) by which Cu-dependent metalloenzymes such as particulate methane monooxygenase or lytic polysaccharide monooxygenase oxidize strong CH bonds.

Controlling the Reactivity of Copper(II) Acylperoxide Complexes

The redox state of the metallomonooxygenases is finely tuned by imposing specific coordination environments on the metal center to reduce the activation energy for the generation of active-oxygen species and subsequent substrate oxygenation reactions. In this study, copper(II) complexes supported by a series of linear tetradentate ligands consisting of a rigid 6-, 7-, or 8-membered cyclic diamine with two pyridylmethyl (-CH₂Py) side arms (L6^Pym2, L7^Pym2, and L8^Pym2) are employed to examine the effects of the coordination environment on the reactivity of their acylperoxide adduct complexes. The UV-vis and electron paramagnetic resonance spectroscopic data indicate that the ligand-field splitting between the d_x²-y² and d_z² orbitals of the starting copper(II) complexes increase with an increase of the ring size of the diamine moiety (L6^Pym2 → L7^Pym2 → L8^Pym2). In the reaction of these copper(II) complexes with m-chloroperbenzoic acid (m-CPBA), the L6^Pym2 complex gives a stable m-CPBA adduct complex, whereas the L7^Pym2 and L8^Pym2 complexes are immediately converted to the corresponding m-chlorobenzoic acid (m-CBA) adducts, indicating that the reactivity of the copper(II) acylperoxide complexes largely depends on the coordination environment induced by the supporting ligands. Density functional theory (DFT) calculations on the m-CPBA adduct complexes show that the ligand-field-splitting energy increases with an increase of the ring size of the diamine moiety, as in the case of the starting copper(II) complexes, which enhances the reactivity of the m-CPBA adduct complexes. The reasons for such different reactivities of the m-CPBA adduct complexes are evaluated by using DFT calculations.

Oxidative C-N bond cleavage of (2-pyridylmethyl)amine-based tetradentate supporting ligands in ternary cobalt(ii)-carboxylate complexes

Three mononuclear cobalt(ii)-carboxylate complexes, [(TPA)Co^II(benzilate)]⁺ (1), [(TPA)Co^II(benzoate)]⁺ (2) and [(iso-BPMEN)Co^II(benzoate)]⁺ (3), of N4 ligands (TPA = tris(2-pyridylmethyl)amine and iso-BPMEN = N¹,N¹-dimethyl-N²,N²-bis((pyridin-2-yl)methyl)ethane-1,2-diamine) were isolated to investigate their reactivity toward dioxygen. Monodentate (η¹) binding of the carboxylates to the metal centre favours the five-coordinate cobalt(ii) complexes (1-3) for dioxygen activation. Complex 1 slowly reacts with dioxygen to enable the oxidative decarboxylation of the coordinated α-hydroxy acid (benzilate). Prolonged exposure of the reaction solution of 2 to dioxygen results in the formation of [(DPA)Co^III(picolinate)(benzoate)]⁺ (4) and [Co^III(BPCA)₂]⁺ (5) (DPA = di(2-picolyl)amine and HBPCA = bis(2-pyridylcarbonyl)amide), whereas only [(DPEA)Co^III(picolinate)(benzoate)]⁺ (6) (DPEA = N¹,N¹-dimethyl-N²-(pyridine-2-ylmethyl)-ethane-1,2-diamine) is isolated from the final oxidised solution of 3. The modified ligand DPA (or DPEA) is formed via the oxidative C-N bond cleavage of the supporting ligands. Further oxidation of the -CH₂- moiety to -C([double bond, length as m-dash]O)- takes place in the transformation of DPA to HBPCA on the cobalt(ii) centre. Labelling experiments with ¹⁸O₂ confirm the incorporation of oxygen atoms from molecular oxygen into the oxidised products. Mixed labelling studies with ¹⁶O₂ and H₂O¹⁸ strongly support the involvement of water in the C-N bond cleavage pathway. A comparison of the dioxygen reactivity of the cobalt complexes (1-3) with those of several other five-coordinate mononuclear complexes [(TPA)Co^II(X)]^+/2+ (X = Cl, CH₃CN, acetate, benzoylformate, salicylate and phenylpyruvate) establishes the role of the carboxylate co-ligands in the activation of dioxygen and subsequent oxidative cleavage of the supporting ligands by a metal-oxygen oxidant.

A nano-molar level fluorogenic and oxidation state-selective chromogenic dual reversible chemosensor for multiple targets, Cu2+/S2− and Fe3+/F− ions

A pyridine–pyrazole–pyrene-based multipurpose chemosensor has been introduced which has been found to exhibit excellent luminescent and optical properties.

Metal-Oxyl Species and Their Possible Roles in Chemical Oxidations

Metal-oxyl (Mⁿ⁺-O^•) complexes having an oxyl radical ligand, which are electronically equivalent to well-known metal-oxo (M⁽ⁿ⁺¹⁾⁺═O) complexes, are surveyed as a new category of metal-based oxidants. Detection and characterization of Mⁿ⁺-O^• species have been made in some cases, although proposals and characterization of the species are mostly done on the basis of density functional theory (DFT) calculations. The reactivity of Mⁿ⁺-O^• complexes will provide a way to achieve potentially difficult oxidative conversion of substrates. This Viewpoint will provide state-of-the-art knowledge on the Mⁿ⁺-O^• species in terms of the formation, characterization, and DFT-based proposals to shed light on the characteristics of the intriguing oxidatively active species.

Oxidative Cleavage of Cellobiose by Lytic Polysaccharide Monooxygenase (LPMO)-Inspired Copper Complexes

The potentially tridentate ligand bis[(1-methyl-2-benzimidazolyl)ethyl]amine (2BB) was employed to prepare copper complexes [(2BB)Cu^I]OTf and [(2BB)Cu^II(H₂O)₂](OTf)₂ as bioinspired models of lytic polysaccharide copper-dependent monooxygenase (LPMO) enzymes. Solid-state characterization of [(2BB)Cu^I]OTf revealed a Cu(I) center with a T-shaped coordination environment and metric parameters in the range of those observed in reduced LPMOs. Solution characterization of [(2BB)Cu^II(H₂O)₂](OTf)₂ indicates that [(2BB)Cu^II(H₂O)₂]²⁺ is the main species from pH 4 to 7.5; above pH 7.5, the hydroxo-bridged species [{(2BB)Cu^II(H₂O) _x }₂(μ-OH)₂]²⁺ is also present, on the basis of cyclic voltammetry and mass spectrometry. These observations imply that deprotonation of the central amine of Cu(II)-coordinated 2BB is precluded, and by extension, amine deprotonation in the histidine brace of LPMOs appears unlikely at neutral pH. The complexes [(2BB)Cu^I]OTf and [(2BB)Cu^II(H₂O)₂](OTf)₂ act as precursors for the oxidative degradation of cellobiose as a cellulose model substrate. Spectroscopic and reactivity studies indicate that a dicopper(II) side-on peroxide complex generated from [(2BB)Cu^I]OTf/O₂ or [(2BB)Cu^II(H₂O)₂](OTf)₂/H₂O₂/NEt₃ oxidizes cellobiose both in acetonitrile and aqueous phosphate buffer solutions, as evidenced from product analysis by high-performance liquid chromatography-mass spectrometry. The mixture of [(2BB)Cu^II(H₂O)₂](OTf)₂/H₂O₂/NEt₃ results in more extensive cellobiose degradation. Likewise, the use of both [(2BB)Cu^I]OTf and [(2BB)Cu^II(H₂O)₂](OTf)₂ with KO₂ afforded cellobiose oxidation products. In all cases, a common Cu(II) complex formulated as [(2BB)Cu^II(OH)(H₂O)]⁺ was detected by mass spectrometry as the final form of the complex.

Directed Hydroxylation of sp2 and sp3 C-H Bonds Using Stoichiometric Amounts of Cu and H2O2

The use of copper for C-H bond functionalization, compared to other metals, is relatively unexplored. Herein, we report a synthetic protocol for the regioselective hydroxylation of sp² and sp³ C-H bonds using a directing group, stoichiometric amounts of Cu and H₂O₂. A wide array of aromatic ketones and aldehydes are oxidized in the carbonyl γ-position with remarkable yields. We also expanded this methodology to hydroxylate the β-position of alkylic ketones. Spectroscopic characterization, kinetics, and density functional theory calculations point toward the involvement of a mononuclear LCu^II(OOH) species, which oxidizes the aromatic sp² C-H bonds via a concerted heterolytic O-O bond cleavage with concomitant electrophilic attack on the arene system.

A simple benzimidazole styryl-based colorimetric chemosensor for dual sensing application

A new colorimetric styryl-benzimidazole based receptor to recognize more than one analyte trans-2-[4'-(dimethylamino)styryl]benzimidazole) (L1) has been synthesized and fully characterized by ¹³C and ¹H NMR, elemental analysis, UV-vis spectroscopy, and HRMS. Investigation of sensing ability of receptor L1 was carried out in presence of multiple anions (Br^-, CN^-, Cl^-, ClO₄^-, F^-, HSO₄^-, PF₆^-, NO₃^-, S^2-, OH^-, AcO^- and H₂PO₄^-) and cations (Cu²⁺, Cr³⁺, Al³⁺, Mg²⁺, Cd²⁺, Ni²⁺, Fe³⁺, K⁺, Fe²⁺, Mn²⁺, Ag⁺, Hg²⁺, Ca²⁺, Co²⁺, Pb²⁺, Na⁺, and Zn²⁺) by using UV-vis spectroscopy. Receptor L1 showed colorimetric response towards only for HSO₄^- ion. Receptor L1-HSO₄^- interaction confirmed with the help of ¹H NMR titration. Among various cations, L1 selectively sense the Cu²⁺ and Al³⁺ with the drastic colour change from yellow to green and dark yellow respectively. The stoichiometric binding ratio of L1 with HSO₄^-, Cu²⁺, and Al³⁺ found to be 1:1 by jobs method and HRMS data proved the complex formation between L1 and Cu²⁺/Al³⁺ with very low detection limit. In addition to explore practical applicability of L1, paper strips have been made and used to detect HSO₄^- and Cu²⁺ ions, respectively, up to 10 ppm level.

Copper-Promoted Functionalization of Organic Molecules: from Biologically Relevant Cu/O2 Model Systems to Organometallic Transformations

Copper is one of the most abundant and less toxic transition metals. Nature takes advantage of the bioavailability and rich redox chemistry of Cu to carry out oxygenase and oxidase organic transformations using O₂ (or H₂O₂) as oxidant. Inspired by the reactivity of these Cu-dependent metalloenzymes, chemists have developed synthetic protocols to functionalize organic molecules under enviormentally benign conditions. Copper also promotes other transformations usually catalyzed by 4d and 5d transition metals (Pd, Pt, Rh, etc.) such as nitrene insertions or C-C and C-heteroatom coupling reactions. In this review, we summarized the most relevant research in which copper promotes or catalyzes the functionalization of organic molecules, including biological catalysis, bioinspired model systems, and organometallic reactivity. The reaction mechanisms by which these processes take place are discussed in detail.

Unprecedented direct cupric-superoxo conversion to a bis-μ-oxo dicopper(III) complex and resulting oxidative activity

Investigations of small molecule copper-dioxygen chemistry can and have provided fundamental insights into enzymatic processes (e.g., copper metalloenzyme dioxygen binding geometries and their associated spectroscopy and substrate reactivity). Strategically designing copper-binding ligands has allowed for insight into properties that favor specific (di)copper-dioxygen species. Herein, the tetradentate tripodal TMPA-based ligand (TMPA = tris((2-pyridyl)methyl)amine) possessing a methoxy moiety in the 6-pyridyl position on one arm (OCH3TMPA) was investigated. This system allows for a trigonal bipyramidal copper(II) geometry as shown by the UV-vis and EPR spectra of the cupric complex [(OCH3TMPA)CuII(OH2)](ClO4)2. Cyclic voltammetry experiments determined the reduction potential of this copper(II) species to be -0.35 V vs. Fc+/0 in acetonitrile, similar to other TMPA-derivatives bearing sterically bulky 6-pyridyl substituents. The copper-dioxygen reactivity is also analogous to these TMPA-derivatives, affording a bis-μ-oxo dicopper(III) complex, [{(OCH3TMPA)CuIII}2(O2-)2]2+, upon oxygenation of the copper(I) complex [(OCH3TMPA)CuI](B(C6F5)4) at cryogenic temperatures in 2-methyltetrahydrofuran. This highly reactive intermediate is capable of oxidizing phenolic substrates through a net hydrogen atom abstraction. However, after bubbling of the precursor copper(I) complex with dioxygen at very low temperatures (-135 °C), a cupric superoxide species, [(OCH3TMPA)CuII(O2 •-)]+, is initially formed before slowly converting to [{(OCH3TMPA)CuIII}2(O2-)2]2+. This appears to be the first instance of the direct conversion of a cupric superoxide to a bis-μ-oxo dicopper(III) species in copper(I)-dioxygen chemistry.

Synthetic Fe/Cu Complexes: Toward Understanding Heme-Copper Oxidase Structure and Function

Heme-copper oxidases (HCOs) are terminal enzymes on the mitochondrial or bacterial respiratory electron transport chain, which utilize a unique heterobinuclear active site to catalyze the 4H+/4e- reduction of dioxygen to water. This process involves a proton-coupled electron transfer (PCET) from a tyrosine (phenolic) residue and additional redox events coupled to transmembrane proton pumping and ATP synthesis. Given that HCOs are large, complex, membrane-bound enzymes, bioinspired synthetic model chemistry is a promising approach to better understand heme-Cu-mediated dioxygen reduction, including the details of proton and electron movements. This review encompasses important aspects of heme-O2 and copper-O2 (bio)chemistries as they relate to the design and interpretation of small molecule model systems and provides perspectives from fundamental coordination chemistry, which can be applied to the understanding of HCO activity. We focus on recent advancements from studies of heme-Cu models, evaluating experimental and computational results, which highlight important fundamental structure-function relationships. Finally, we provide an outlook for future potential contributions from synthetic inorganic chemistry and discuss their implications with relevance to biological O2-reduction.

Specific Enhancement of Catalytic Activity by a Dicopper Core: Selective Hydroxylation of Benzene to Phenol with Hydrogen Peroxide

A dicopper(II) complex, stabilized by the bis(tpa) ligand 1,2-bis[2-[bis(2-pyridylmethyl)aminomethyl]-6-pyridyl]ethane (6-hpa), [Cu₂ (μ-OH)(6-hpa)]³⁺ , was synthesized and structurally characterized. This complex catalyzed selective hydroxylation of benzene to phenol using H₂ O₂ , thus attaining large turnover numbers (TONs) and high H₂ O₂ efficiency. The TON after 40 hours for the phenol production exceeded 12000 in MeCN at 50 °C under N₂ , the highest value reported for benzene hydroxylation with H₂ O₂ catalyzed by homogeneous complexes. At 22 % benzene conversion, phenol (95.2 %) and p-benzoquinone (4.8 %) were produced. The mechanism of H₂ O₂ activation and benzene hydroxylation is proposed.

Selective recognition of Cu (II) and Fe (III) using a pyrene based chemosensor

A pyrene-based colorimetric chemosensor 1-(pyren-1-yl)-N,N-bis-(pyridine-2-ylmethyl)methanamine (1) was synthesised for selective detection of Cu (II) and Fe (III) over the other metal cations Ni²⁺, Mg²⁺, Cd²⁺, Hg²⁺, Na⁺, K⁺, Ca²⁺, Co²⁺, Cr³⁺, Pb²⁺ and Zn²⁺. The significant changes in UV-vis absorption band of receptor 1 and the emergence of 660nm band in presence of Cu²⁺ ion indicates the selective binding of Cu²⁺ ion as compared to other metal cations which could easily be identified from the naked eye strong colour change. Job plots suggest a 1:1 and 2:1 stoichiometric binding of Cu²⁺ and Fe³⁺, respectively, which was evidenced by ESI-MS analysis. Chemosensor 1 explores a cost-effective and selective colorimetric sensor for naked eye detection of trace amount of Cu²⁺ and Fe³⁺ ions in presence of other metal cations.

Copper-catalyzed aromatic C-H alkoxylation with alcohols under aerobic conditions

An efficient protocol for copper-catalyzed aromatic C-H alkoxylation with alcohols has been developed under aerobic conditions. The protocol provides a complementary method to couple arenes and alcohols to furnish aromatic ethers. The advantages of this method are the employment of a cheap Cu(OAc)₂ catalyst, oxygen as the terminal oxidant and alcohol as both an alkoxy reagent and a solvent. Notably, the catalytic amount of benzoic acid plays a significant role in this transformation.

Copper(I)-Dioxygen Adducts and Copper Enzyme Mechanisms

Primary copper(I)-dioxygen (O₂) adducts, cupric-superoxide complexes, have been proposed intermediates in copper-containing dioxygen-activating monooxygenase and oxidase enzymes. Here, mechanisms of C-H activation by reactive copper-(di)oxygen intermediates are discussed, with an emphasis on cupric-superoxide species. Over the past 25 years, many synthetically derived cupric-superoxide model complexes have been reported. Due to the thermal instability of these intermediates, early studies focused on increasing their stability and obtaining physical characterization. More recently, in an effort to gain insight into the possible substrate oxidation step in some copper monooxygenases, several cupric-superoxide complexes have been used as surrogates to probe substrate scope and reaction mechanisms. These cupric superoxides are capable of oxidizing substrates containing weak O-H and C-H bonds. Mechanistic studies for some enzymes and model systems have supported an initial hydrogen-atom abstraction via the cupric-superoxide complex as the first step of substrate oxidation.

Perturbing the Copper(III)-Hydroxide Unit through Ligand Structural Variation

Two new ligand sets, (pipMe)LH2 and (NO2)LH2 ((pipMe)L = N,N'-bis(2,6-diisopropylphenyl)-1-methylpiperidine-2,6-dicarboxamide, (NO2)L = N,N'-bis(2,6-diisopropyl-4-nitrophenyl)pyridine-2,6-dicarboxamide), are reported which are designed to perturb the overall electronics of the copper(III)-hydroxide core and the resulting effects on the thermodynamics and kinetics of its hydrogen-atom abstraction (HAT) reactions. Bond dissociation energies (BDEs) for the O-H bonds of the corresponding Cu(II)-OH2 complexes were measured that reveal that changes in the redox potential for the Cu(III)/Cu(II) couple are only partially offset by opposite changes in the pKa, leading to modest differences in BDE among the three compounds. The effects of these changes were further probed by evaluating the rates of HAT by the corresponding Cu(III)-hydroxide complexes from substrates with C-H bonds of variable strength. These studies revealed an overarching linear trend in the relationship between the log k (where k is the second-order rate constant) and the ΔH of reaction. Additional subtleties in measured rates arise, however, that are associated with variations in hydrogen-atom abstraction barrier heights and tunneling efficiencies over the temperature range from -80 to -20 °C, as inferred from measured kinetic isotope effects and corresponding electronic-structure-based transition-state theory calculations.

Supramolecular control of monooxygenase reactivity in a copper(ii) cryptate

We report on the formation and self-decomposition of Cu(ii)–hydroperoxo intermediates with a cryptand ligand. The second coordination sphere of the cryptand steers the oxidative reactivity of the intermediates towards the formation of an unprecedented N-oxide.

Amine oxidative N-dealkylation via cupric hydroperoxide Cu-OOH homolytic cleavage followed by site-specific fenton chemistry

Copper(II) hydroperoxide species are significant intermediates in processes such as fuel cells and (bio)chemical oxidations, all involving stepwise reduction of molecular oxygen. We previously reported a Cu(II)-OOH species that performs oxidative N-dealkylation on a dibenzylamino group that is appended to the 6-position of a pyridyl donor of a tripodal tetradentate ligand. To obtain insights into the mechanism of this process, reaction kinetics and products were determined employing ligand substrates with various para-substituent dibenzyl pairs (-H,-H; -H,-Cl; -H,-OMe, and -Cl,-OMe), or with partially or fully deuterated dibenzyl N-(CH2Ph)2 moieties. A series of ligand-copper(II) bis-perchlorate complexes were synthesized, characterized, and the X-ray structures of the -H,-OMe analogue were determined. The corresponding metastable Cu(II)-OOH species were generated by addition of H2O2/base in acetone at -90 °C. These convert (t1/2 ≈ 53 s) to oxidatively N-dealkylated products, producing para-substituted benzaldehydes. Based on the experimental observations and supporting DFT calculations, a reaction mechanism involving dibenzylamine H-atom abstraction or electron-transfer oxidation by the Cu(II)-OOH entity could be ruled out. It is concluded that the chemistry proceeds by rate limiting Cu-O homolytic cleavage of the Cu(II)-(OOH) species, followed by site-specific copper Fenton chemistry. As a process of broad interest in copper as well as iron oxidative (bio)chemistries, a detailed computational analysis was performed, indicating that a Cu(I)OOH species undergoes O-O homolytic cleavage to yield a hydroxyl radical and Cu(II)OH rather than heterolytic cleavage to yield water and a Cu(II)-O(•-) species.

Proton donor modulating ESIPT-based fluorescent probes for highly sensitive and selective detection of Cu2+

Two novel ESIPT-based fluorescent probes for Cu²⁺ detection were developed. Altering the linker in probe molecules reversed their sensing behavior. Both probes exhibited high selectivity and sensitivity to Cu²⁺, and can be used for cell imaging.

Transition metal complexes and the activation of dioxygen

In order to address how diverse metalloprotein active sites, in particular those containing iron and copper, guide O₂binding and activation processes to perform diverse functions, studies of synthetic models of the active sites have been performed. These studies have led to deep, fundamental chemical insights into how O₂coordinates to mono- and multinuclear Fe and Cu centers and is reduced to superoxo, peroxo, hydroperoxo, and, after O-O bond scission, oxo species relevant to proposed intermediates in catalysis. Recent advances in understanding the various factors that influence the course of O₂activation by Fe and Cu complexes are surveyed, with an emphasis on evaluating the structure, bonding, and reactivity of intermediates involved. The discussion is guided by an overarching mechanistic paradigm, with differences in detail due to the involvement of disparate metal ions, nuclearities, geometries, and supporting ligands providing a rich tapestry of reaction pathways by which O₂is activated at Fe and Cu sites.