cis-Dihydroxylation of alkenes with oxone catalyzed by iron complexes of a macrocyclic tetraaza ligand and reaction mechanism by ESI-MS spectrometry and DFT calculations

Dearomative syn-Dihydroxylation of Naphthalenes with a Biomimetic Iron Catalyst

Arenes are interesting feedstocks for organic synthesis because of their natural abundance. However, the stability conferred by aromaticity severely limits their reactivity, mostly to reactions where aromaticity is retained. Methods for oxidative dearomatization of unactivated arenes are exceedingly rare but particularly valuable because the introduction of Csp3-O bonds transforms the flat aromatic ring in 3D skeletons and confers the oxygenated molecules with a very rich chemistry suitable for diversification. Mimicking the activity of naphthalene dioxygenase (NDO), a non-heme iron-dependent bacterial enzyme, herein we describe the catalytic syn-dihydroxylation of naphthalenes with hydrogen peroxide, employing a sterically encumbered and exceedingly reactive yet chemoselective iron catalyst. The high electrophilicity of hypervalent iron oxo species is devised as a key to enabling overcoming the aromatically promoted kinetic stability. Interestingly, the first dihydroxylation of the arene renders a reactive olefinic site ready for further dihydroxylation. Sequential bis-dihydroxylation of a broad range of naphthalenes provides valuable tetrahydroxylated products in preparative yields, amenable for rapid diversification.

Mononuclear Non-Heme Manganese-Catalyzed Enantioselective cis-Dihydroxylation of Alkenes Modeling Rieske Dioxygenases

The practical catalytic enantioselective cis-dihydroxylation of olefins that utilize earth-abundant first-row transition metal catalysts under environmentally friendly conditions is an important yet challenging task. Inspired by the cis-dihydroxylation reactions catalyzed by Rieske dioxygenases and non-heme iron models, we report the biologically inspired cis-dihydroxylation catalysis that employs an inexpensive and readily available mononuclear non-heme manganese complex bearing a tetradentate nitrogen-donor ligand and aqueous hydrogen peroxide (H2O2) and potassium peroxymonosulfate (KHSO5) as terminal oxidants. A wide range of olefins are efficiently oxidized to enantioenriched cis-diols in practically useful yields with excellent cis-dihydroxylation selectivity and enantioselectivity (up to 99% ee). Mechanistic studies, such as isotopically 18O-labeled water experiments, and density functional theory (DFT) calculations support that a manganese(V)-oxo-hydroxo (HO-MnV═O) species, which is formed via the water-assisted heterolytic O-O bond cleavage of putative manganese(III)-hydroperoxide and manganese(III)-peroxysulfate precursors, is the active oxidant that effects the cis-dihydroxylation of olefins; this is reminiscent of the frequently postulated iron(V)-oxo-hydroxo (HO-FeV═O) species in the catalytic arene and alkene cis-dihydroxylation reactions by Rieske dioxygenases and synthetic non-heme iron models. Further, DFT calculations for the mechanism of the HO-MnV═O-mediated enantioselective cis-dihydroxylation of olefins reveal that the first oxo attack step controls the enantioselectivity, which exhibits a high preference for cis-dihydroxylation over epoxidation. In this study, we are able to replicate both the catalytic function and the key chemical principles of Rieske dioxygenases in mononuclear non-heme manganese-catalyzed enantioselective cis-dihydroxylation of olefins.

Metal-Catalyst-Free One-Pot Aqueous Synthesis of trans-1,2-Diols from Electron-Deficient α,β-Unsaturated Amides via Epoxidation Using Oxone as a Dual Role Reagent

In organic synthesis, incorporating two functional groups into the carbon-carbon double bond of α,β-unsaturated amides is challenging due to the electron-deficient nature of the olefin moiety. Although a few examples of dihydroxylation of α,β-unsaturated amides have been demonstrated, producing cis-1,2-diols using either highly toxic OsO4 or other specialized metal reagents in organic solvents, they are limited to several specific amides. We describe herein a general and one-pot direct synthesis of trans-1,2-diols from electron-deficient α,β-unsaturated amides through dihydroxylation using oxone as a dual-role reagent in water. This reaction does not require any metal catalyst and produces non-hazardous and nontoxic K2 SO4 as the sole byproduct. Moreover, epoxidation products could also be selectively formed by adjusting the reaction conditions. By the strategy, the intermediates of Mcl-1 inhibitor and antiallergic bioactive molecule can be synthesized in one pot. The gram-scale synthesis of trans-1,2-diol which is isolated and purified by recrystallization further shows the potential applications of this new reaction in organic synthesis.

Periodate-Mediated Aerobic Oxidation of Sulfides over a Bifunctional Porphyrin-polyoxometalate Catalyst: Photosensitized Singlet Oxygen Oxidation of Iodate to Periodate

Regeneration of terminal oxidants by molecular oxygen in metal-catalyzed oxidations of organic substrates has the advantage of avoiding the use of stoichiometric amounts of hazardous and/or expensive reagents to meet (some of) the green chemistry requirements. In the present study, photosensitized singlet oxygen oxidation of iodate to periodate has been used to regenerate the oxidant in polyoxometalate (POM)-catalyzed oxidation of sulfides to sulfoxides with periodate in water. To the best of our knowledge, it is the first report on singlet oxygen oxidation of iodate to periodate. In order to determine the contribution of photooxidation and oxidation pathways in the formation of sulfoxide, the oxidation of diphenyl sulfide with a very low reactivity toward aerobic photooxidation was studied; a sevenfold increase in the conversion of the sulfide to the diphenyl sulfoxide was observed for the reaction conducted in the presence of H2TMPyP-PW12O40/IO3-/O2/hν compared to that in the presence of H2TMPyP-PW12O40/O2/hν. Also, under the same conditions, a ca. 1.5-fold increase was observed in the case of methyl phenyl sulfide, which shows high reactivity toward both the oxidation and photooxidation reactions. A porphyrin-POM nanocomposite formed by the electrostatic immobilization of meso-tetra(N-methylpyridinium-4-yl)porphyrin (H2TMPyP) on PW12O40 was employed for the one-pot oxidation and photooxidation reactions. Field-emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), diffuse-reflectance UV-vis spectroscopy, thermal gravimetric analysis, and Fourier transform infrared were used to characterize the formation of the hybrid compound. An average particle size of 42 nm was estimated for H2TMPyP-PW12O40 from XRD peak broadening using the Scherrer equation. Also, FESEM images showed the formation of nearly spherical nanoparticles with a size of ca. 200 nm. The redshift of the Soret band of H2TMPyP upon immobilization on POM was attributed to strong N-H···O hydrogen-bond interactions between POM and porphyrin.

Iodine-Initiated Dioxygenation of Aryl Alkenes Using tert-Butylhydroperoxides and Water: A Route to Vicinal Diols and Bisperoxides

An environment-friendly and efficient dioxygenation of aryl alkenes for the construction of vicinal diols has been developed in water with iodine as the catalyst and tert-butylhydroperoxides (TBHPs) as the oxidant. The protocol was efficient, sustainable, and operationally simple. Detailed mechanistic studies indicated that one of the hydroxyl groups is derived from water and the other one is derived from TBHP. Additionally, the bisperoxides could be obtained in good yields with iodine as the catalyst, Na₂CO₃ as the additive, and propylene carbonate as the solvent, instead.

Replacement of Volatile Acetic Acid by Solid SiO2@COOH Silica (Nano)Beads for (Ep)Oxidation Using Mn and Fe Complexes Containing BPMEN Ligand

Mn and Fe BPMEN complexes showed excellent reactivity in catalytic oxidation with an excess of co-reagent (CH3COOH). In the straight line of a cleaner catalytic system, volatile acetic acid was replaced by SiO2 (nano)particles with two different sizes to which pending carboxylic functions were added (SiO2@COOH). The SiO2@COOH beads were obtained by the functionalization of SiO2 with pending nitrile functions (SiO2@CN) followed by CN hydrolysis. All complexes and silica beads were characterized by NMR, infrared, DLS, TEM, X-ray diffraction. The replacement of CH3COOH by SiO2@COOH (100 times less on molar ratio) has been evaluated for (ep)oxidation on several substrates (cyclooctene, cyclohexene, cyclohexanol) and discussed in terms of activity and green metrics.

Electrochemically driven stereoselective approach to syn-1,2-diol derivatives from vinylarenes and DMF

We have developed an electrochemically driven strategy for the stereoselective synthesis of protected syn-1,2-diols from vinylarenes with N,N-dimethylformamide (DMF). The newly developed system obviates the need for transition metal catalysts or external oxidizing agents, thus providing an operationally simple and efficient route to an array of protected syn-1,2-diols in a single step. This reaction proceeds via an electrooxidation of olefin, followed by a nucleophilic attack of DMF. Subsequent oxidation and nucleophilic capture of the generated carbocation with a trifluoroacetate ion is proposed, which gives rise predominantly to a syn-diastereoselectivity upon the second nucleophilic attack of DMF.

Iron-Catalyzed Highly Enantioselective cis-Dihydroxylation of Trisubstituted Alkenes with Aqueous H2 O2

Reliable methods for enantioselective cis-dihydroxylation of trisubstituted alkenes are scarce. The iron(II) complex cis-α-[Fe^II (2-Me₂ -BQPN)(OTf)₂ ], which bears a tetradentate N₄ ligand (Me₂ -BQPN=(R,R)-N,N'-dimethyl-N,N'-bis(2-methylquinolin-8-yl)-1,2-diphenylethane-1,2-diamine), was prepared and characterized. With this complex as the catalyst, a broad range of trisubstituted electron-deficient alkenes were efficiently oxidized to chiral cis-diols in yields of up to 98 % and up to 99.9 % ee when using hydrogen peroxide (H₂ O₂ ) as oxidant under mild conditions. Experimental studies (including ¹⁸ O-labeling, ESI-MS, NMR, EPR, and UV/Vis analyses) and DFT calculations were performed to gain mechanistic insight, which suggested possible involvement of a chiral cis-Fe^V (O)₂ reaction intermediate as an active oxidant. This cis-[Fe^II (chiral N₄ ligand)]²⁺ /H₂ O₂ method could be a viable green alternative/complement to the existing OsO₄ -based methods for asymmetric alkene dihydroxylation reactions.

Ligand Taxonomy for Bioinorganic Modeling of Dioxygen-Activating Non-Heme Iron Enzymes

Novel functions emerge from novel structures. To develop efficient catalytic systems for challenging chemical transformations, chemists often seek inspirations from enzymatic catalysis. A large number of iron complexes supported by nitrogen-rich multidentate ligands have thus been developed to mimic oxo-transfer reactivity of dioxygen-activating metalloenzymes. Such efforts have significantly advanced our understanding of the reaction mechanisms by trapping key intermediates and elucidating their geometric and electronic properties. Critical to the success of this biomimetic approach is the design and synthesis of elaborate ligand systems to balance the thermodynamic stability, structural adaptability, and chemical reactivity. In this Concept article, representative design strategies for biomimetic atom-transfer chemistry are discussed from the perspectives of "ligand builders". Emphasis is placed on how the primary coordination sphere is constructed, and how it can be elaborated further by rational design for desired functions.

Mechanistic insights into the allylic oxidation of aliphatic compounds by tetraamido iron(v) species: A C–H vs. O–H bond activation

This work is based on a deep insight into a comparative study of C–H vs. O–H bond activation of allylic compound by the high valent iron complex. Our theoretical findings can help to design catalysts with better efficiency for catalytic reactions.

Enhancement of the Antioxidant Activity and Neurotherapeutic Features through Pyridol Addition to Tetraazamacrocyclic Molecules

Alzheimer's and other neurodegenerative diseases are chronic conditions affecting millions of individuals worldwide. Oxidative stress is a consistent component described in the development of many neurodegenerative diseases. Therefore, innovative strategies to develop drug candidates that overcome oxidative stress in the brain are needed. To target these challenges, a new, water-soluble 12-membered tetraaza macrocyclic pyridinophane L4 was designed and produced using a building-block approach. Potentiometric data show that the neutral species of L4 provides interesting zwitterionic behavior at physiological pH, akin to amino acids, and a nearly ideal isoelectric point of 7.3. The copper(II) complex of L4 was evaluated by X-ray diffraction and cyclic voltammetry to show the potential modes of antioxidant activity derived, which was also demonstrated by 2,2-diphenyl-1-picrylhydrazyl and coumarin carboxylic acid antioxidant assays. L4 was shown to have dramatically enhanced antioxidant activity and increased biological compatibility compared to parent molecules reported previously. L4 attenuated hydrogen peroxide (H2O2)-induced cell viability loss more efficiently than precursor molecules in the mouse hippocampal HT-22 cell model. L4 also showed potent (fM) level protection against H2O2 cell death in a BV2 microglial cell culture. Western blot studies indicated that L4 enhanced the cellular antioxidant defense capacity via Nrf2 signaling activation as well. Moreover, a low-cost analysis and high metabolic stability in phase I and II models were observed. These encouraging results show how the rational design of lead compounds is a suitable strategy for the development of treatments for neurodegenerative diseases where oxidative stress plays a substantial role.

Increase of Direct C-C Coupling Reaction Yield by Identifying Structural and Electronic Properties of High-Spin Iron Tetra-azamacrocyclic Complexes

Macrocyclic ligands have been explored extensively as scaffolds for transition metal catalysts for oxygen and hydrogen atom transfer reactions. C-C reactions facilitated using earth abundant metals bound to macrocyclic ligands have not been well-understood but could be a green alternative to replacing the current expensive and toxic precious metal systems most commonly used for these processes. Therefore, the yields from direct Suzuki-Miyaura C-C coupling of phenylboronic acid and pyrrole to produce 2-phenylpyrrole facilitated by eight high-spin iron complexes ([Fe3+L1(Cl)2]+, [Fe3+L4(Cl)2]+, [Fe2+L5(Cl)]+, [Fe2+L6(Cl)2], [Fe3+L7(Cl)2]+, [Fe3+L8(Cl)2]+, [Fe2+L9(Cl)]+, and [Fe2+L10(Cl)]+) were compared to identify the effect of structural and electronic properties on catalytic efficiency. Specifically, catalyst complexes were compared to evaluate the effect of five properties on catalyst reaction yields: (1) the coordination requirements of the catalyst, (2) redox half-potential of each complex, (3) topological constraint/rigidity, (4) N atom modification(s) increasing oxidative stability of the complex, and (5) geometric parameters. The need for two labile cis-coordination sites was confirmed based on a 42% decrease in catalytic reaction yield observed when complexes containing pentadentate ligands were used in place of complexes with tetradentate ligands. A strong correlation between iron(III/II) redox potential and catalytic reaction yields was also observed, with [Fe2+L6(Cl)2] providing the highest yield (81%, -405 mV). A Lorentzian fitting of redox potential versus yields predicts that these catalysts can undergo more fine-tuning to further increase yields. Interestingly, the remaining properties explored did not show a direct, strong relationship to catalytic reaction yields. Altogether, these results show that modifications to the ligand scaffold using fundamental concepts of inorganic coordination chemistry can be used to control the catalytic activity of macrocyclic iron complexes by controlling redox chemistry of the iron center. Furthermore, the data provide direction for the design of improved catalysts for this reaction and strategies to understand the impact of a ligand scaffold on catalytic activity of other reactions.

Spectroscopic and DFT Characterization of a Highly Reactive Nonheme FeV-Oxo Intermediate

The reaction of [(PyNMe₃)Fe^II(CF₃SO₃)₂], 1, with excess peracetic acid at -40 °C generates a highly reactive intermediate, 2b(PAA), that has the fastest rate to date for oxidizing cyclohexane by a nonheme iron species. It exhibits an intense 490 nm chromophore associated with an S = 1/2 EPR signal having g-values at 2.07, 2.01, and 1.94. This species was shown to be in a fast equilibrium with a second S = 1/2 species, 2a(PAA), assigned to a low-spin acylperoxoiron(III) center. Unfortunately, contaminants accompanying the 2(PAA) samples prevented determination of the iron oxidation state by Mössbauer spectroscopy. Use of MeO-PyNMe₃ (an electron-enriched version of PyNMe₃) and cyclohexyl peroxycarboxylic acid as oxidant affords intermediate 3b(CPCA) with a Mössbauer isomer shift δ = -0.08 mm/s that indicates an iron(V) oxidation state. Analysis of the Mössbauer and EPR spectra, combined with DFT studies, demonstrates that the electronic ground state of 3b(CPCA) is best described as a quantum mechanical mixture of [(MeO-PyNMe₃)Fe^V(O)(OC(O)R)]²⁺ (∼75%) with some Fe^IV(O)(^•OC(O)R) and Fe^III(OOC(O)R) character. DFT studies of 3b(CPCA) reveal that the unbound oxygen of the carboxylate ligand, O2, is only 2.04 Å away from the oxo group, O1, corresponding to a Wiberg bond order for the O1-O2 bond of 0.35. This unusual geometry facilitates reversible O1-O2 bond formation and cleavage and accounts for the high reactivity of the intermediate when compared to the rates of hydrogen atom transfer and oxygen atom transfer reactions of Fe^III(OC(O)R) ferric acyl peroxides and Fe^IV(O) complexes. The interaction of O2 with O1 leads to a significant downshift of the Fe-O1 Raman frequency (815 cm^-1) relative to the 903 cm^-1 value predicted for the hypothetical [(MeO-PyNMe₃)Fe^V(O)(NCMe)]³⁺ complex.

cis-Oxoruthenium complexes supported by chiral tetradentate amine (N4) ligands for hydrocarbon oxidations

We report the first examples of ruthenium complexes cis-[(N₄)Ru^IIICl₂]⁺ and cis-[(N₄)Ru^II(OH₂)₂]²⁺ supported by chiral tetradentate amine ligands (N₄), together with a high-valent cis-dioxo complex cis-[(N₄)Ru^VI(O)₂]²⁺ supported by the chiral N₄ ligand mcp (mcp = N,N'-dimethyl-N,N'-bis(pyridin-2-ylmethyl)cyclohexane-1,2-diamine). The X-ray crystal structures of cis-[(mcp)Ru^IIICl₂](ClO₄) (1a), cis-[(Me₂mcp)Ru^IIICl₂]ClO₄ (2a) and cis-[(pdp)Ru^IIICl₂](ClO₄) (3a) (Me₂mcp = N,N'-dimethyl-N,N'-bis((6-methylpyridin-2-yl)methyl)cyclohexane-1,2-diamine, pdp = 1,1'-bis(pyridin-2-ylmethyl)-2,2'-bipyrrolidine)) show that the ligands coordinate to the ruthenium centre in a cis-α configuration. In aqueous solutions, proton-coupled electron-transfer redox couples were observed for cis-[(mcp)Ru^III(O₂CCF₃)₂]ClO₄ (1b) and cis-[(pdp)Ru^III(O₃SCF₃)₂]CF₃SO₃ (3c'). Electrochemical analyses showed that the chemically/electrochemically generated cis-[(mcp)Ru^VI(O)₂]²⁺ and cis-[(pdp)Ru^VI(O)₂]²⁺ complexes are strong oxidants with E° = 1.11-1.13 V vs. SCE (at pH 1) and strong H-atom abstractors with D_O-H = 90.1-90.8 kcal mol^-1. The reaction of 1b or its (R,R)-mcp counterpart with excess (NH₄)₂[Ce^IV(NO₃)₆] (CAN) in aqueous medium afforded cis-[(mcp)Ru^VI(O)₂](ClO₄)₂ (1e) or cis-[((R,R)-mcp)Ru^VI(O)₂](ClO₄)₂ (1e*), respectively, a strong oxidant with E(Ru^VI/V) = 0.78 V (vs. Ag/AgNO₃) in acetonitrile solution. Complex 1e oxidized various hydrocarbons, including cyclohexane, in acetonitrile at room temperature, affording alcohols and/or ketones in up to 66% yield. Stoichiometric oxidations of alkenes by 1e or 1e* in ^t BuOH/H₂O (5 : 1 v/v) afforded diols and aldehydes in combined yields of up to 98%, with moderate enantioselectivity obtained for the reaction using 1e*. The cis-[(pdp)Ru^II(OH₂)₂]²⁺ (3c)-catalysed oxidation of saturated C-H bonds, including those of ethane and propane, with CAN as terminal oxidant was also demonstrated.

Improved synthesis of symmetrically & asymmetrically N-substituted pyridinophane derivatives

The N,N'-di(toluenesulfonyl)-2,11-diaza[3,3](2,6)pyridinophane (^TsN4) precursor was sought after as a starting point for the preparation of various symmetric and asymmetric pyridinophane-derived ligands. Various procedures to synthesize ^TsN4 had been published, but the crucial problem had been the purification of ^TsN4 from the larger 18- and 24-membered azamacrocycles. Most commonly, column chromatography or other laborious methods have been utilized for this separation, yet we have found an alternate selective dissolution method upon protonation which allows for multi-gram scale output of ^TsN4·HCl. This optimized synthesis of ^TsN4 also led to the development of symmetric ^RN4 derivatives as well as the asymmetric derivative N-(tosyl)-2,11-diaza[3,3](2,6)pyridinophane (^TsHN4). Using this ^TsHN4 precursor, different N-substituents can be added to create a library of asymmetric ^RR'N4 macrocyclic ligands. These asymmetric ^RR'N4 derivatives expand the utility of the ^RN4 framework in coordination chemistry and the ability to study the electronic, steric, and denticity effects of these pyridinophane ligands on the metal center.

Oxidation of aromatic alkenes and alkynes catalyzed by a hexa-acetonitrile iron(ii) ionic complex [Fe(CH3CN)6][BF4]2

A simple Fe(ii) catalyst that catalyses the oxidation of aromatic alkenes and alkynes under ambient conditions.

cis-Dioxorhenium(V/VI) Complexes Supported by Neutral Tetradentate N4 Ligands. Synthesis, Characterization, and Spectroscopy

A series of cis-dioxorhenium(V) complexes containing chiral tetradentate N₄ ligands, including cis-[Re^V(O)₂(pyxn)]⁺ (1; pyxn = N,N'-dimethyl-N,N'-bis(2-pyridylmethyl)cyclohexane-1,2-diamine), cis-[Re^V(O)₂(6-Me₂pyxn)]⁺ (cis-2), cis-[Re^V(O)₂(R,R-pdp)]⁺ (3; R,R-pdp = 1,1'-bis((R,R)-2-pyridinylmethyl)-2,2'-bipyrrolidine), cis-[Re^V(O)₂(R,R-6-Me₂pdp)]⁺ (4), and cis-[Re^V(O)₂(bqcn)]⁺ (5; bqcn = N,N'-dimethyl-N,N'-di(quinolin-8-yl)cyclohexane-1,2-diamine), were synthesized. Their structures were established by X-ray crystallography, showing Re-O distances in the range of 1.740(3)-1.769(8) Å and O-Re-O angles of 121.4(2)-124.8(4)°. Their cyclic voltammograms in MeCN (0.1 M [NBu₄]PF₆) display a reversible Re^VI/V couple at E_1/2 = 0.39-0.49 V vs SCE. In aqueous media, three proton-coupled electron transfer reactions corresponding to Re^VI/V, Re^V/III, and Re^III/II couples were observed at pH 1. The Pourbaix diagrams of 1·OTf, 3·OTf, and 5·OTf have been examined. The electronic absorption spectra of the cis-dioxorhenium(V) complexes show three absorption bands at around 800 nm (600-1730 dm³ mol^-1 cm^-1), 580 nm (1700-5580 dm³ mol^-1 cm^-1), and 462-523 nm (3170-6000 dm³ mol^-1 cm^-1). Reaction of 1 with Lewis acids (or protic acids) gave cis-[Re^V(O)(OH)(pyxn)]²⁺ (1·H⁺), in which the Re-O distances are lengthened to 1.788(5) Å. Complex cis-2 resulted from isomerization of trans-2 at elevated temperature. cis-[Re^VI(O)₂(pyxn)](PF₆)₂ (1'·(PF₆)₂) was obtained by constant-potential electrolysis of 1·PF₆ in MeCN (0.1 M [NBu₄]PF₆) at 0.56 V vs SCE; it displays shorter Re-O distances (1.722(4), 1.726(4) Å) and a smaller O-Re-O angle (114.88(18)°) relative to 1 and shows a d-d transition absorption band at 591 nm (ε = 77 dm³ mol^-1 cm^-1). With a driving force of ca. 75 kcal mol^-1, 1' oxidizes hydrocarbons with weak C-H bonds (75.5-76.3 kcal mol^-1) via hydrogen atom abstraction. DFT and TDDFT calculations on the electronic structures and spectroscopic properties of the cis-dioxorhenium(V/VI) complexes were performed.

Dioxygen activation by nonheme iron enzymes with the 2-His-1-carboxylate facial triad that generate high-valent oxoiron oxidants

The 2-His-1-carboxylate facial triad is a widely used scaffold to bind the iron center in mononuclear nonheme iron enzymes for activating dioxygen in a variety of oxidative transformations of metabolic significance. Since the 1990s, over a hundred different iron enzymes have been identified to use this platform. This structural motif consists of two histidines and the side chain carboxylate of an aspartate or a glutamate arranged in a facial array that binds iron(II) at the active site. This triad occupies one face of an iron-centered octahedron and makes the opposite face available for the coordination of O₂ and, in many cases, substrate, allowing the tailoring of the iron-dioxygen chemistry to carry out a plethora of diverse reactions. Activated dioxygen-derived species involved in the enzyme mechanisms include iron(III)-superoxo, iron(III)-peroxo, and high-valent iron(IV)-oxo intermediates. In this article, we highlight the major crystallographic, spectroscopic, and mechanistic advances of the past 20 years that have significantly enhanced our understanding of the mechanisms of O₂ activation and the key roles played by iron-based oxidants.

Visible light-promoted dihydroxylation of styrenes with water and dioxygen

An efficient visible light promoted metal-free dihydroxylation of styrenes with water and dioxygen has been developed for the construction of vicinal alcohols.

Highly Enantioselective Iron-Catalyzed cis-Dihydroxylation of Alkenes with Hydrogen Peroxide Oxidant via an Fe(III) -OOH Reactive Intermediate

The development of environmentally benign catalysts for highly enantioselective asymmetric cis-dihydroxylation (AD) of alkenes with broad substrate scope remains a challenge. By employing [Fe(II) (L)(OTf)2 ] (L=N,N'-dimethyl-N,N'-bis(2-methyl-8-quinolyl)-cyclohexane-1,2-diamine) as a catalyst, cis-diols in up to 99.8 % ee with 85 % isolated yield have been achieved in AD of alkenes with H2 O2 as an oxidant and alkenes in a limiting amount. This "[Fe(II) (L)(OTf)2 ]+H2 O2 " method is applicable to both (E)-alkenes and terminal alkenes (24 examples >80 % ee, up to 1 g scale). Mechanistic studies, including (18) O-labeling, UV/Vis, EPR, ESI-MS analyses, and DFT calculations lend evidence for the involvement of chiral Fe(III) -OOH active species in enantioselective formation of the two C-O bonds.

Direct oxidative lactonization of alkenoic acids mediated solely by NaIO4: beyond a simple oxidant

Triflic acid-catalyzed direct oxidative lactonization of alkenoic acids mediated solely by NaIO4 without halogen salts is described. Sodium periodate works not only as an oxidant, but also as an active reagent and directly mediates the lactonization. A new cheap, green, and practical oxidative lactonization approach has been developed using NaIO4 as the sole reagent.