129Xe NMR Study of the Framework Flexibility of the Porous Hybrid MIL-53(Al)

Molecular recognition with resolution below 0.2 angstroms through thermoregulatory oscillations in covalent organic frameworks

Crystalline materials with uniform molecular-sized pores are desirable for a broad range of applications, such as sensors, catalysis, and separations. However, it is challenging to tune the pore size of a single material continuously and to reversibly distinguish small molecules (below 4 angstroms). We synthesized a series of ionic covalent organic frameworks using a tetraphenoxyborate linkage that maintains meticulous synergy between structural rigidity and local flexibility to achieve continuous and reversible (100 thermal cycles) tunability of "dynamic pores" between 2.9 and 4.0 angstroms, with resolution below 0.2 angstroms. This results from temperature-regulated, gradual amplitude change of high-frequency linker oscillations. These thermoelastic apertures selectively block larger molecules over marginally smaller ones, demonstrating size-based molecular recognition and the potential for separating challenging gas mixtures such as oxygen/nitrogen and nitrogen/methane.

CO2-induced gate-opening structural transition process of a porous coordination polymer revealed by solid-state 13C NMR

This study investigates the gate-opening closed-to-open-pore structural transition of a porous coordination polymer induced by CO2 adsorption. Solid-state 13C NMR examination of adsorbed CO2 and framework dynamics reveals the surface adsorption state of the closed structure below the transition pressure and an intermediate structure during the transition process.

An ultralow concentration of Al-MOFs for turn-on fluorescence detection of aflatoxin B1 in tea samples

A turn-on fluorescent sensing platform based on an ultralow concentration of Al-metal organic frameworks for the detection of aflatoxin B₁ has been developed for the first time. This fluorescence turn-on sensor exhibits the largest fluorescence enhancement (or quenching) constant value of 179404 M^-1 among all luminescence-based chemical sensors reported till date. Moreover, the sensor afforded a rapid detection of aflatoxin B₁, with a linear response in the concentration range of 0.05-9.61 μM and a low detection limit of 11.67 ppb. Additionally, the fabricated sensor showed good repeatability, reproducibility, stability, and selectivity. Most importantly, the practical application of this sensor has been demonstrated by detecting aflatoxin B₁ in complex tea samples with low relative standard deviation (≤7.72%; n = 3) and satisfactory recoveries. In summary, the proposed method has great potential as a simple, sensitive and selective strategy for monitoring aflatoxin B₁ in food samples.

Portable Hyperpolarized Xe-129 Apparatus with Long-Time Stable Polarization Mediated by Adaptable Rb Vapor Density

The extraordinary sensitivity of ¹²⁹Xe, hyperpolarized by spin-exchange optical pumping, is essential for magnetic resonance imaging and spectroscopy in life and materials sciences. However, fluctuations of the polarization over time still limit the reproducibility and quantification with which the interconnectivity of pore spaces can be analyzed. Here, we present a polarizer that not only produces a continuous stream of hyperpolarized ¹²⁹Xe but also maintains stable polarization levels on the order of hours, independent of gas flow rates. The polarizer features excellent magnetization production rates of about 70 mL/h and ¹²⁹Xe polarization values on the order of 40% at moderate system pressures. Key design features include a vertically oriented, large-capacity two-bodied pumping cell and a separate Rb presaturation chamber having its own temperature control, independent of the main pumping cell oven. The separate presaturation chamber allows for precise control of the Rb vapor density by restricting the Rb load and varying the temperature. The polarizer is both compact and transportable─making it easily storable─and adaptable for use in various sample environments. Time-evolved two-dimensional (2D) exchange spectra of ¹²⁹Xe absorbed in the microporous metal-organic framework CAU-1-AmMe are presented to highlight the quantitative nature of the device.

17 O solid-state NMR at ultrahigh magnetic field of 35.2 T: Resolution of inequivalent oxygen sites in different phases of MOF MIL-53(Al)

MIL-53(Al) is a member of the most extensively studied metal-organic framework (MOF) families owing to its "flexible" framework and superior stability. 17 O solid-state NMR (SSNMR) spectroscopy is an ideal site-specific characterization tool as it probes local oxygen environments. Because oxygen local structure is often altered during phase change, 17 O SSNMR can be used to follow phase transitions. However, 17 O is a challenging nucleus to study via SSNMR due to its low sensitivity and resolution arising from the very low natural abundance of 17 O isotope and its quadrupolar nature. In this work, we describe that by using 17 O isotopic enrichment and performing 17 O SSNMR experiments at an ultrahigh magnetic field of 35.2 T, all chemically and crystallographically inequivalent oxygen sites in two representative MIL-53(Al) (as-made and water adsorbed) phases can be completely resolved. The number of signals in each phase is consistent with that predicted from the space group refined from powder X-ray diffraction data. The 17 O 1D magic-angle spinning (MAS) and 2D triple-quantum MAS (3QMAS) spectra at 35.2 T furnish fine information about the host-guest interactions and the structural changes associated with phase transition. The ability to completely resolve multiple chemically and crystallographically inequivalent oxygen sites in MOFs at very high magnetic field, as illustrated in this work, significantly enhances the potential for using the NMR crystallography approach to determine crystal structures of new MOFs and verify the structures of existing MOFs obtained from refining powder X-ray diffraction data.

High Pressure In Situ Single-Crystal X-Ray Diffraction Reveals Turnstile Linker Rotation Upon Room-Temperature Stepped Uptake of Alkanes

The rare availability of suitable single-crystal X-ray diffraction (SCXRD) structural data allows for the direct interpretation of the response of a framework to gas sorption and may lead to the development of improved functional porous materials. We report an in situ SCXRD structural investigation of a flexible MOF subjected to methane, ethane, propane, and butane gas pressures. Supporting theoretical investigations indicate weak host-guest interactions for the crystallographically modelled gaseous guests and, in addition, reveal that a turnstile mechanism facilitates the transport of alkanes through the seemingly nonporous system. Inflections present in the adsorption isotherms are furthermore rationalized as due to gate-opening, but without the expected creation of new accessible space.

Insights into the microstructure and interconnectivity of porosity in porous starch by hyperpolarized 129Xe NMR

For the first time, hyperpolarized (HP) ¹²⁹Xe NMR measurements are utilized to explore porous structures of porous starch (PS) successfully. Some micropores resided inside the mesopore walls of PS were detected by variable temperature (VT) HP ¹²⁹Xe NMR, and the pore sizes of micropores were also estimated using the empirical relationship. Furthermore, the interconnectivity of pores was investigated in detail by two-dimensional (2D) exchange spectroscopy (EXSY). The exchange process of xenon from microporosity within pore walls to the free gas space was occurred at the mixing time of ≥12 ms at 173 K, which indicated the well interconnectivity between micropores and mesopores. This study not only exhibits a new approach for investigation of pores and hollows of PS, but also provides a better understanding of porous structures for rational design in adsorbing functional compounds.

129Xe NMR: A powerful tool for studying the adsorption mechanism between mesoporous corn starch and palladium

For the first time, ¹²⁹Xe NMR measurements are utilized to explore adsorption mechanism between porous structures of mesoporous corn starch and Palladium. Dithiocarbamate modified mesoporous corn starch (donated as DTC MS) was synthesized and applied for adsorption of Pd (II) ion successfully. The structural characterization of DTC MS was carried out by FT-IR, ¹³C solid-state NMR and XRD, respectively. To study the adsorption mechanism, variable temperature ¹²⁹Xe NMR was measured on samples of DTC MS and Pd adsorbed in DTC mesoporous starch (donated as Pd-DTC MS), respectively. It was found that Pd ions were mainly located inside pores and channels instead of the surface of mesoporous starch. The results not only demonstrate that ¹²⁹Xe NMR spectroscopy is a powerful tool to assess the porous structure of MS, but also pave the way for investigating the interaction between functional molecules and porous starch.

Paramagnetic Organocobalt Capsule Revealing Xenon Host-Guest Chemistry

We investigated Xe binding in a previously reported paramagnetic metal-organic tetrahedral capsule, [Co4L6]4-, where L2- = 4,4'-bis[(2-pyridinylmethylene)amino][1,1'-biphenyl]-2,2'-disulfonate. The Xe-inclusion complex, [XeCo4L6]4-, was confirmed by 1H NMR spectroscopy to be the dominant species in aqueous solution saturated with Xe gas. The measured Xe dissociation rate in [XeCo4L6]4-, koff = 4.45(5) × 102 s-1, was at least 40 times greater than that in the analogous [XeFe4L6]4- complex, highlighting the capability of metal-ligand interactions to tune the capsule size and guest permeability. The rapid exchange of 129Xe nuclei in [XeCo4L6]4- produced significant hyperpolarized 129Xe chemical exchange saturation transfer (hyper-CEST) NMR signal at 298 K, detected at a concentration of [XeCo4L6]4- as low as 100 pM, with presaturation at -89 ppm, which was referenced to solvated 129Xe in H2O. The saturation offset was highly temperature-dependent with a slope of -0.41(3) ppm/K, which is attributed to hyperfine interactions between the encapsulated 129Xe nucleus and electron spins on the four CoII centers. As such, [XeCo4L6]4- represents the first example of a paramagnetic hyper-CEST (paraHYPERCEST) sensor. Remarkably, the hyper-CEST 129Xe NMR resonance for [XeCo4L6]4- (δ = -89 ppm) was shifted 105 ppm upfield from the diamagnetic analogue [XeFe4L6]4- (δ = +16 ppm). The Xe inclusion complex was further characterized in the crystal structure of (C(NH2)3)4[Xe0.7Co4L6]·75 H2O (1). Hydrogen bonding between capsule-linker sulfonate groups and exogenous guanidinium cations, (C(NH2)3)+, stabilized capsule-capsule interactions in the solid state and also assisted in trapping a Xe atom (∼42 Å3) in the large (135 Å3) cavity of 1. Magnetic susceptibility measurements confirmed the presence of four noninteracting, magnetically anisotropic high-spin CoII centers in 1. Furthermore, [Co4L6]4- was found to be stable toward aggregation and oxidation, and the CEST performance of [XeCo4L6]4- was unaffected by biological macromolecules in H2O. These results recommend metal-organic capsules for fundamental investigations of Xe host-guest chemistry as well as applications with highly sensitive 129Xe-based sensors.

Paramagnetic Shifts and Guest Exchange Kinetics in ConFe4-n Metal-Organic Capsules

We investigate the magnetic resonance properties and exchange kinetics of guest molecules in a series of hetero-bimetallic capsules, [Co_nFe_4-nL₆]^4- (n = 1-3), where L^2- = 4,4'-bis[(2-pyridinylmethylene)amino]-[1,1'-biphenyl]-2,2'-disulfonate. H bond networks between capsule sulfonates and guanidinium cations promote the crystallization of [Co_nFe_4-nL₆]^4-. The following four isostructural crystals are reported: two guest-free forms, (C(NH₂)₃)₄[Co_1.8Fe_2.2L₆]·69H₂O (1) and (C(NH₂)₃)₄[Co_2.7Fe_1.3L₆]·73H₂O (2), and two Xe- and CFCl₃-encapsulated forms, (C(NH₂)₃)₄[(Xe)_0.8Co_1.8Fe_2.2L₆]·69H₂O (3) and (C(NH₂)₃)₄[(CFCl₃)Co_2.0Fe_2.0L₆]·73H₂O (4), respectively. Structural analyses reveal that Xe induces negligible structural changes in 3, while the angles between neighboring phenyl groups expand by ca. 3° to accommodate the much larger guest, CFCl₃, in 4. These guest-encapsulated [Co_nFe_4-nL₆]^4- molecules reveal ¹²⁹Xe and ¹⁹F chemical shift changes of ca. -22 and -10 ppm at 298 K, respectively, per substitution of low-spin Fe^II by high-spin Co^II. Likewise, the temperature dependence of the ¹²⁹Xe and ¹⁹F NMR resonances increases by 0.1 and 0.06 ppm/K, respectively, with each additional paramagnetic Co^II center. The optimal temperature for hyperpolarized (hp) ¹²⁹Xe chemical exchange saturation transfer (hyper-CEST) with [Co_nFe_4-nL₆]^4- capsules was found to be inversely proportional to the number of Co^II centers, n, which is consistent with the Xe chemical exchange accelerating as the portals expand. The systematic study was facilitated by the tunability of the [M₄L₆]^4- capsules, further highlighting these metal-organic systems for developing responsive sensors with highly shifted ¹²⁹Xe resonances.

Single particle Raman spectroscopy analysis of the metal-organic framework DUT-8(Ni) switching transition under hydrostatic pressure

Experimental in situ observations of phase coexistence in switchable metal-organic frameworks are reported to provide a fundamental understanding of dynamic adsorbents that can change their pore structure in response to external stimuli. A prototypical flexible pillared layer framework DUT-8(Ni) (DUT = Dresden University of Technology) was studied under hydrostatic pressure by in situ Raman spectroscopy on single crystals. The closing transition of the open pore phase (op) containing DMF in the pores in silicon oil as a pressure transmitting fluid, as well as the closed pore phase (cp) to op transition under pressure in methanol, were studied. Phase coexistences during both transitions were observed.

Hyperpolarized Xe NMR signal advancement by metal-organic framework entrapment in aqueous solution

We report hyperpolarized Xe signal advancement by metal-organic framework (MOF) entrapment (Hyper-SAME) in aqueous solution. The ¹²⁹Xe NMR signal is drastically promoted by entrapping the Xe into the pores of MOFs. The chemical shift of entrapped ¹²⁹Xe is clearly distinguishable from that of free ¹²⁹Xe in water, due to the surface and pore environment of MOFs. The influences from the crystal size of MOFs and their concentration in water are studied. A zinc imidazole MOF, zeolitic imidazole framework-8 (ZIF-8), with particle size of 110 nm at a concentration of 100 mg/mL, was used to give an NMR signal with intensity four times that of free ¹²⁹Xe in water. Additionally, Hyper-SAME is compatible with hyperpolarized ¹²⁹Xe chemical exchange saturation transfer. The ¹²⁹Xe NMR signal can be amplified further by combining the two techniques. More importantly, Hyper-SAME provides a way to make detection of hyperpolarized ¹²⁹Xe in aqueous solution convenient and broadens the application area of MOFs.

Solid-state NMR spectroscopy: an advancing tool to analyse the structure and properties of metal-organic frameworks

Metal-organic frameworks (MOFs) gain increasing interest due to their outstanding properties like extremely high porosity, structural variability, and various possibilities for functionalization. Their overall structure is usually determined by diffraction techniques. However, diffraction is often not sensitive for subtle local structural changes and ordering effects as well as dynamics and flexibility effects. Solid-state nuclear magnetic resonance (ssNMR) spectroscopy is sensitive for short range interactions and thus complementary to diffraction techniques. Novel methodical advances make ssNMR experiments increasingly suitable to tackle the above mentioned problems and challenges. NMR spectroscopy also allows study of host-guest interactions between the MOF lattice and adsorbed guest species. Understanding the underlying mechanisms and interactions is particularly important with respect to applications such as gas and liquid separation processes, gas storage, and others. Special in situ NMR experiments allow investigation of properties and functions of MOFs under controlled and application-relevant conditions. The present minireview explains the potential of various solid-state and in situ NMR techniques and illustrates their application to MOFs by highlighting selected examples from recent literature.

Solvent Impact on the Properties of Benchmark Metal-Organic Frameworks: Acetonitrile-Based Synthesis of CAU-10, Ce-UiO-66, and Al-MIL-53

Herein is reported the utilization of acetonitrile as a new solvent for the synthesis of the three significantly different benchmark metal-organic frameworks (MOFs) CAU-10, Ce-UiO-66, and Al-MIL-53 of idealized composition [Al(OH)(ISO)], [Ce6 O4 (OH)4 (BDC)6 ], and [Al(OH)(BDC)], respectively (ISO2- : isophthalate, BDC2- : terephthalate). Its use allowed the synthesis of Ce-UiO-66 on a gram scale. While CAU-10 and Ce-UiO-66 exhibit properties similar to those reported elsewhere for these two materials, the obtained Al-MIL-53 shows no structural flexibility upon adsorption of hydrophilic or hydrophobic guest molecules such as water and xenon and is stabilized in its large-pore form over a broad temperature range (130-450 K). The stabilization of the large-pore form of Al-MIL-53 was attributed to a high percentage of noncoordinating -COOH groups as determined by solid-state NMR spectroscopy. The defective material shows an unusually high water uptake of 310 mg g-1 within the range of 0.45 to 0.65 p/p°. In spite of showing no breathing effect upon water adsorption it exhibits distinct mechanical properties. Thus, mercury intrusion porosimetry studies revealed that the solid can be reversibly forced to breathe by applying moderate pressures (≈60 MPa).

High-Pressure in Situ 129Xe NMR Spectroscopy: Insights into Switching Mechanisms of Flexible Metal-Organic Frameworks Isoreticular to DUT-49

Flexible metal-organic frameworks (MOFs) are capable of changing their crystal structure as a function of external stimuli such as pressure, temperature, and type of adsorbed guest species. DUT-49 is the first MOF exhibiting structural transitions accompanied by the counterintuitive phenomenon of negative gas adsorption. Here, we present high-pressure in situ ¹²⁹Xe NMR spectroscopic studies of a novel isoreticular MOF family based on DUT-49. These porous materials differ only in the length of their organic linkers causing changes in pore size and elasticity. The series encompasses both, purely microporous materials as well as materials with both micropores and small mesopores. The chemical shift of the adsorbed xenon depends on xenon-wall interactions and thus on the pore size of the material. The xenon adsorption behavior of different MOFs can be observed over the whole range of relative pressure. Chemical shift adsorption/desorption isotherms closely resembling the conventional, uptake-measurement-based isotherms were obtained at 237 K where all materials are rigid. The comparable chemical environment of the adsorbed xenon in these isoreticular MOFs allows to establish a correlation between the chemical shift at a relative pressure of p/p ₀ = 1.0 and the mean pore diameter. Furthermore, the xenon adsorption behavior of MOFs is studied also at 200 K. Here, structural flexibility is found for DUT-50, a material with an even longer linker than that of the previously known DUT-49. Its structural transitions are monitored by ¹²⁹Xe NMR spectroscopy. This compound is the second known MOF showing the phenomenon of negative gas adsorption. Further increase in the linker length results in DUT-151, a material with an interpenetrated network topology. In situ ¹²⁹Xe NMR spectroscopy proves that this material exhibits another type of flexibility compared to DUT-49 and DUT-50. Further surprising observations are made for DUT-46. Volumetric xenon adsorption measurements show that this nonflexible microporous material does not exhibit any hysteresis. In contrast, the in situ ¹²⁹Xe NMR spectroscopically detected xenon chemical shift isotherms exhibit a hysteresis even after longer equilibration times than in the volumetric experiments. This indicates kinetically hindered redistribution processes and long-lived metastable states of adsorbed xenon within the MOF persisting at the time scale of hours or longer.

Location determination of metal nanoparticles relative to a metal-organic framework

Metal nanoparticles (NPs) stabilized by metal-organic frameworks (MOFs) have been intensively studied in recent decades, while investigations on the location of guest metal NPs relative to host MOF particles remain challenging and very rare. In this work, we have developed several characterization techniques, including high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) tomography, hyperpolarized ¹²⁹Xe NMR spectroscopy and positron annihilation spectroscopy (PAS), which are able to determine the specific location of metal NPs relative to the MOF particle. The fine PdCu NPs confined inside MIL-101 exhibit excellent catalytic activity, absolute selectivity and satisfied recyclability in the aerobic oxidation of benzyl alcohol in pure water. As far as we know, the determination for the location of metal NPs relative to MOF particles and pore structure information of metal NPs/MOF composites by ¹²⁹Xe NMR and PAS techniques has not yet been reported.

While metal nanoparticles (NPs) stabilized by metal-organic frameworks (MOFs) have been intensively studied, the determination of the location of guest metal NPs relative to host MOF particles remains challenging. Here the authors develop several techniques to determine the specific location of metal NPs relative to the MOF particles.

Metal-organic framework crystal-glass composites

The majority of research into metal-organic frameworks (MOFs) focuses on their crystalline nature. Recent research has revealed solid-liquid transitions within the family, which we use here to create a class of functional, stable and porous composite materials. Described herein is the design, synthesis, and characterisation of MOF crystal-glass composites, formed by dispersing crystalline MOFs within a MOF-glass matrix. The coordinative bonding and chemical structure of a MIL-53 crystalline phase are preserved within the ZIF-62 glass matrix. Whilst separated phases, the interfacial interactions between the closely contacted microdomains improve the mechanical properties of the composite glass. More significantly, the high temperature open pore phase of MIL-53, which spontaneously transforms to a narrow pore upon cooling in the presence of water, is stabilised at room temperature in the crystal-glass composite. This leads to a significant improvement of CO₂ adsorption capacity.

The formation of composite materials has been widely exploited to alter the chemical and physical properties of their components. Here the authors form metal–organic framework (MOF) crystal–glass composites in which a MOF glass matrix stabilises the open pore structure of MIL-53, leading to enhanced CO₂ adsorption.

Flexibility in Metal–Organic Frameworks: A Basic Understanding

Much has been written about the fundamental aspects of the metal–organic frameworks (MOFs). Still, details concerning the MOFs with structural flexibility are not comprehensively understood. However, a dramatic increase in research activities concerning rigid MOFs over the years has brought deeper levels of understanding for their properties and applications. Nonetheless, robustness and flexibility of such smart frameworks are intriguing for different research areas such as catalysis, adsorption, etc. This manuscript overviews the different aspects of framework flexibility. The review has touched lightly on several ideas and proposals, which have been demonstrated within the selected examples to provide a logical basis to obtain a fundamental understanding of their synthesis and behavior to external stimuli.

Phase Transitions in Confinements: Controlling Solid to Fluid Transitions of Xenon Atoms in an On-Surface Network

This study reports on "phase" transitions of Xe condensates in on-surface confinements induced by temperature changes and local probe excitation. The pores of a metal-organic network occupied with 1 up to 9 Xe atoms are investigated in their propensity to undergo "condensed solid" to "confined fluid" transitions. Different transition temperatures are identified, which depend on the number of Xe atoms in the condensate and relate to the stability of the Xe clustering in the condensed "phase." This work reveals the feature-rich behavior of transitions of confined planar condensates, which provide a showcase toward future "phase-transition" storage media patterned by self-assembly. This work is also of fundamental interest as it paves the way to real space investigations of reversible solid to fluid transitions of magic cluster condensates in an array of extremely well-defined quantum confinements.

Visualizing Structural Transformation and Guest Binding in a Flexible Metal-Organic Framework under High Pressure and Room Temperature

Understanding the effect of gas molecules on the framework structures upon gas sorption in porous materials is highly desirable for the development of gas storage and separation technologies. However, this remains challenging for flexible metal-organic frameworks (MOFs) which feature "gate-opening/gate-closing" or "breathing" sorption behaviors under external stimuli. Herein, we report such a flexible Cd-MOF that exhibits "gating effect" upon CO₂ sorption. The ability of the desolvated flexible Cd-MOF to retain crystal singularity under high pressure enables the direct visualization of the reversible closed-/open-pore states before and after the structural transformation as induced by CO₂ adsorption/desorption through in situ single-crystal X-ray diffraction experiments. The binding sites of CO₂ molecules within the flexible MOF under high pressure and room temperature have also been identified via combined in situ single-crystal X-ray diffraction and powder X-ray diffraction studies, facilitating the elucidation of the states observed during gate-opening/gate-closing behaviors. Our work therefore lays a foundation to understand the high-pressure gas sorption within flexible MOFs at ambient temperature, which will help to improve the design efforts of new flexible MOFs for applications in responsive gas sorption and separation.

Giant Hysteretic Sorption of CO2 : In Situ Crystallographic Visualization of Guest Binding within a Breathing Framework at 298 K

A dynamic Zn^II -MOF has been shown to exhibit extreme breathing behavior under gas pressure. The very narrow pore form of the activated framework opens up in the presence of carbon dioxide, thus making it a suitable material for CO₂ capture. Sorption of CO₂ at 298 K and relatively high pressure clearly shows a two-step isotherm with giant hysteresis for the second step. In-situ single-crystal diffraction analysis was carried out under CO₂ gas pressure at 298 K using an environmental gas cell in order to visualize the interaction between CO₂ and the host framework. The results are well supported by pressure-gradient differential scanning calorimetry (P-DSC) and variable-pressure powder X-ray analysis. Theoretical calculations have been carried out in order to further back up the crystallographic data.

The origin of the measured chemical shift of 129Xe in UiO-66 and UiO-67 revealed by DFT investigations

The NMR chemical shift of the xenon isotope ¹²⁹Xe inside the metal-organic frameworks (MOFs) UiO-66 and UiO-67 (UiO - University of Oslo) has been investigated both with density functional theory (DFT) and in situ high-pressure ¹²⁹Xe NMR measurements. The experiments reveal a decrease of the total chemical shift comparing the larger isoreticular MOF (UiO-67) with the smaller one (UiO-66), even though one may expect an increase due to the higher amount of adsorbed Xe atoms. We are able to calculate contributions to the chemical shift individually. This allows us to evaluate the shift inside the different pores independently. To compare the theoretical results with the experimental ones, we performed molecular dynamics simulations of Xe in the MOFs. For this purpose, the pores were completely filled with Xe to gain insight into the distribution of Xe at high pressures. The resulting trend of the total shift agrees well between the theoretical predictions and the experiments. Moreover, we are able to describe specific contributions to the total shift per pore, explaining the experimental behavior at an atomistic level.

Theoretical and experimental investigations of 129Xe NMR chemical shift isotherms in metal–organic frameworks

Theoretical framework and experimental measurements to determine ¹²⁹Xe chemical shift isotherms in the metal–organic frameworks UiO-66 and UiO-67.

A route to robust thioether-functionalized MOF solid materials displaying heavy metal uptake and the ability to be further oxidized

Here we developed a facile solvent-assisted ligand exchange method for synthesizing thioether-containing hybrid metal-organic frameworks (MOFs) that cannot be made using direct synthesis. Such a tailored approach provides an alternative method to achieve thioether-based MOFs and its oxidation-decorated materials. These materials showed the ability to take up heavy metals from solution and the ability to capture CO₂.

NMR crystallography to probe the breathing effect of the MIL-53(Al) metal–organic framework using solid-state NMR measurements of 13C–27Al distances

The metal–organic framework MIL-53(Al) (aluminium terephthalate) exhibits a structural transition between two porous structures with large pore (lp) or narrow pore (np) configurations. This transition, called the breathing effect, is observed upon changes in temperature or external pressure, as well as with the adsorption of guest molecules, such as H2O, within the pores. We show here how these different pore openings can be detected by observing the dephasing of 13C magnetization under 13C–27Al dipolar couplings using Rotational-Echo Saturation-Pulse Double-Resonance (RESPDOR) solid-state NMR experiments with Simultaneous Frequency and Amplitude Modulation (SFAM) recoupling. These double-resonance NMR experiments between 13C and 27Al nuclei, which have close Larmor frequencies, are feasible thanks to the use of a frequency splitter. The experimental SFAM–RESPDOR signal fractions agree well with those simulated from the MIL-53(Al)-lp and -np crystal structures obtained from powder X-ray diffraction analysis. Hence, these 13C–27Al solid-state NMR experiments validate these structures and confirm their rigidity. A similar agreement is reported for the framework ligands in the as-synthesized (as) MIL-53(Al), in which the pores contain free ligands. Furthermore, in this case, 13C–{27Al} SFAM–RESPDOR experiments allow an estimation of the average distance between the free ligands and the 27Al nuclei of the framework.

Deducing CO2 motion, adsorption locations and binding strengths in a flexible metal-organic framework without open metal sites

Microporous metal-organic frameworks (MOFs) have high surface areas and porosities, and are well-suited for CO2 capture. MIL-53 features corner-sharing MO4(OH)2 (M = Al, Ga, Cr, etc.) octahedra interconnected by benzenedicarboxylate linkers that form one-dimensional rhombic tunnels, and exhibits an excellent adsorption ability for guest molecules such as CO2. Studying the behavior of adsorbed CO2 in MIL-53 via solid-state NMR (SSNMR) provides rich information on the dynamic motion of guest molecules as well as their binding strengths to the MOF host, and sheds light on the specific guest adsorption mechanisms. Variable-temperature (13)C SSNMR spectra of (13)CO2 adsorbed within various forms of MIL-53 are acquired and analyzed. CO2 undergoes a combination of two motions within MIL-53; we report the types of motion present, their rates, and rotational angles. (1)H-(13)C CP SSNMR experiments are used to examine the proximity of (1)H atoms in the MOF to (13)C atoms in CO2 guests. By replacing (1)H with (2)H in MIL-53, the location of the CO2 adsorption site in MIL-53 is experimentally confirmed by (1)H-(13)C CP SSNMR. The binding strength of CO2 within these MIL-53 MOFs follows the order MIL-53-NH2 (Al) > MIL-53-NH2 (Ga) > MIL-53 (Al) > MIL-53 (Ga).

Structural flexibility in crystallized matter: from history to applications

The large reversible flexibility of hybrid crystallized matter is relatively new. After briefly recalling the history of this discovery, the article will analyze the different parameters influencing this phenomenon. They relate first to the various structural characteristics of the framework, in both its inorganic and organic parts. The influence of the energies of the guest-guest and host-guest interactions is then analyzed. Once the reasons are explained, a third section will be devoted to the various physical properties of these flexible solids. The last section concerns recent industrial applications of this family of solids.

Giant flexibility of crystallized organic–inorganic porous solids: facts, reasons, effects and applications

Giant structural flexibility is a characteristic of organic–inorganic frameworks. This perspective describes its history, its behaviours, the analysis of its structural reasons at its consequences in terms of properties and applications.

Gate-opening gas adsorption and host-guest interacting gas trapping behavior of porous coordination polymers under applied AC electric fields

The gate-opening adsorption behavior of the one-dimensional chain compound [Ru2(4-Cl-2-OMePhCO2)4(phz)] (1; 4-Cl-2-OMePhCO2(-) = 4-chloro-o-anisate; phz = phenazine) for various gases (O2, NO, and CO2) was electronically monitored in situ by applying ac electric fields to pelletized samples attached to a cryostat, which was used to accurately control the temperature and gas pressure. The gate-opening and -closing transitions induced by gas adsorption/desorption, respectively, were accurately monitored by a sudden change in the real part of permittivity (ε'). The transition temperature (TGO) was also found to be dependent on the applied temperature and gas pressure according to the Clausius-Clapeyron equation. This behavior was also observed in the isostructural compound [Rh2(4-Cl-2-OMePhCO2)4(phz)] (2), which exhibited similar gate-opening adsorption properties, but was not detected in the nonporous gate-inactive compound [Ru2(o-OMePhCO2)4(phz)] (3). Furthermore, the imaginary part of permittivity (ε″) effectively captured the electronic perturbations of the samples induced by the introduced guest molecules. Only the introduction of NO resulted in the increase of the sample's electronic conductivity for 1 and 3, but not for 2. This behavior indicates that electronic host-guest interactions were present, albeit very weak, at the surface of sample 1 and 3, i.e., through grain boundaries of the sample, which resulted in perturbation of the conduction band of this material's framework. This technique involving the in situ application of ac electric fields is useful not only for rapidly monitoring gas sorption responses accompanied by gate-opening/-closing structural transitions but also potentially for the development of molecular framework materials as chemically driven electronic devices.

A Review on Breathing Behaviors of Metal-Organic-Frameworks (MOFs) for Gas Adsorption

Metal-organic frameworks (MOFs) are a new class of microporous materials that possess framework flexibility, large surface areas, "tailor-made" framework functionalities, and tunable pore sizes. These features empower MOFs superior performances and broader application spectra than those of zeolites and phosphine-based molecular sieves. In parallel with designing new structures and new chemistry of MOFs, the observation of unique breathing behaviors upon adsorption of gases or solvents stimulates their potential applications as host materials in gas storage for renewable energy. This has attracted intense research energy to understand the causes at the atomic level, using in situ X-ray diffraction, calorimetry, Fourier transform infrared spectroscopy, and molecular dynamics simulations. This article is developed in the following order: first to introduce the definition of MOFs and the observation of their framework flexibility. Second, synthesis routes of MOFs are summarized with the emphasis on the hydrothermal synthesis, owing to the environmental-benign and economically availability of water. Third, MOFs exhibiting breathing behaviors are summarized, followed by rationales from thermodynamic viewpoint. Subsequently, effects of various functionalities on breathing behaviors are appraised, including using post-synthetic modification routes. Finally, possible framework spatial requirements of MOFs for yielding breathing behaviors are highlighted as the design strategies for new syntheses.

Recent NMR developments applied to organic-inorganic materials

In this contribution, the latest developments in solid state NMR are presented in the field of organic-inorganic (O/I) materials (or hybrid materials). Such materials involve mineral and organic (including polymeric and biological) components, and can exhibit complex O/I interfaces. Hybrids are currently a major topic of research in nanoscience, and solid state NMR is obviously a pertinent spectroscopic tool of investigation. Its versatility allows the detailed description of the structure and texture of such complex materials. The article is divided in two main parts: in the first one, recent NMR methodological/instrumental developments are presented in connection with hybrid materials. In the second part, an exhaustive overview of the major classes of O/I materials and their NMR characterization is presented.