Manganese porphyrins catalyze selective C-H bond halogenations

Strategies and Mechanisms of First-Row Transition Metal-Regulated Radical C-H Functionalization

Radical C-H functionalization represents a useful means of streamlining synthetic routes by avoiding substrate preactivation and allowing access to target molecules in fewer steps. The first-row transition metals (Ti, V, Cr, Mn, Fe, Co, Ni, and Cu) are Earth-abundant and can be employed to regulate radical C-H functionalization. The use of such metals is desirable because of the diverse interaction modes between first-row transition metal complexes and radical species including radical addition to the metal center, radical addition to the ligand of metal complexes, radical substitution of the metal complexes, single-electron transfer between radicals and metal complexes, hydrogen atom transfer between radicals and metal complexes, and noncovalent interaction between the radicals and metal complexes. Such interactions could improve the reactivity, diversity, and selectivity of radical transformations to allow for more challenging radical C-H functionalization reactions. This review examines the achievements in this promising area over the past decade, with a focus on the state-of-the-art while also discussing existing limitations and the enormous potential of high-value radical C-H functionalization regulated by these metals. The aim is to provide the reader with a detailed account of the strategies and mechanisms associated with such functionalization.

Recent Advances in Direct Regioselective C-H Chlorination at Aromatic and Aliphatic

Direct installation of key functionalities in a molecule through C-H bond activation is one of the thrust areas as well as challenging task in organic synthesis. Particularly, introduction of chlorine in a molecule imparts additional benefits for further functionalizations as well as improves the electronic behaviour such as lipophilicity and polarity towards drug development process. The chlorinated molecules have also been established as efficient biologically relevant scaffolds. Current manuscript has been focused on the direct installation of the chlorine atom at various aromatic and aliphatic positions to produce functional molecules. The key highlight of the manuscript belongs to the site selectivity (regioselectivity) for the installation of chlorine functionality. Manuscript describes the advanced methods developed for the direct C-H chlorination reactions and further simplified for the chlorination reactions at various positions including aromatic (o-, m-, and p-), benzylic, heteroaromatic, and aliphatic positions. Directing groups (DGs) and the coordination with the catalyst is the key for the enhancement of regioselectivities during direct C-H chlorination reactions.

Markovnikov Hydrochlorination of Unactivated Alkenes with FeCl3 via a HAT/XAT Sequence

Hydrochlorination of alkenes is a practical strategy for accessing organic chlorides. Herein, we report the hydrochlorination of unactivated alkenes via a hydrogen atom transfer/halogen atom transfer process using earth-abundant and biocompatible FeCl3 as a chlorine source under extraordinarily mild reaction conditions. The protocol is easy to operate with notable features such as excellent chemoselectivity, remarkable efficiency, a broad substrate scope, and good functional group tolerance. Importantly, the synthetic utility is highlighted by scaled-up reactions, late-stage derivatizations of products, and the modification of sulfonamides.

Catalyst and Medium Control over Rebound Pathways in Manganese-Catalyzed Methylenic C-H Bond Oxidation

The C(sp3)-H bond oxygenation of a variety of cyclopropane containing hydrocarbons with hydrogen peroxide catalyzed by manganese complexes containing aminopyridine tetradentate ligands was carried out. Oxidations were performed in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and 2,2,2-trifluoroethanol (TFE) using different manganese catalysts and carboxylic acid co-ligands, where steric and electronic properties were systematically modified. Functionalization selectively occurs at the most activated C-H bonds that are α- to cyclopropane, providing access to carboxylate or 2,2,2-trifluoroethanolate transfer products, with no competition, in favorable cases, from the generally dominant hydroxylation reaction. The formation of mixtures of unrearranged and rearranged esters (oxidation in HFIP in the presence of a carboxylic acid) and ethers (oxidation in TFE) with full control over diastereoselectivity was observed, confirming the involvement of delocalized cationic intermediates in these transformations. Despite such a complex mechanistic scenario, by fine-tuning of catalyst and carboxylic acid sterics and electronics and leveraging on the relative contribution of cationic pathways to the reaction mechanism, control over product chemoselectivity could be systematically achieved. Taken together, the results reported herein provide powerful catalytic tools to rationally manipulate ligand transfer pathways in C-H oxidations of cyclopropane containing hydrocarbons, delivering novel products in good yields and, in some cases, outstanding selectivities, expanding the available toolbox for the development of synthetically useful C-H functionalization procedures.

An artificial nickel chlorinase based on the biotin-streptavidin technology

Herein, we report on an artificial nickel chlorinase (ANCase) resulting from anchoring a biotinylated nickel-based cofactor within streptavidin (Sav). The resulting ANCase was efficient for the chlorination of diverse C(sp3)-H bonds. Guided by the X-ray analysis of the ANCase, the activity of the artificial chlorinase could be significantly improved. This approach opens interesting perspectives for late-stage functionalization of organic intermediates as it complements biocatalytic chlorination strategies.

Radical and Cationic Pathways in C(sp3)-H Bond Oxygenation by Dioxiranes of Bicyclic and Spirocyclic Hydrocarbons Bearing Cyclopropane Moieties

A product and DFT computational study on the reactions of 3-ethyl-3-(trifluoromethyl)dioxirane (ETFDO) with bicyclic and spirocyclic hydrocarbons bearing cyclopropyl groups was carried out. With bicyclo[n.1.0]alkanes (n = 3-6), diastereoselective formation of the alcohol product derived from C2-H bond hydroxylation was observed, accompanied by smaller amounts of products derived from oxygenation at other sites. With 1-methylbicyclo[4.1.0]heptane, rearranged products were also observed in addition to the unrearranged products deriving from oxygenation at the most activated C2-H and C5-H bonds. With spiro[2.5]octane and 6-tert-butylspiro[2.5]octane, reaction with ETFDO occurred predominantly or exclusively at the axial C4-H to give unrearranged oxygenation products, accompanied by smaller amounts of rearranged bicyclo[4.2.0]octan-1-ols. The good to outstanding site-selectivities and diastereoselectivities are paralleled by the calculated activation free energies for the corresponding reaction pathways. Computations show that the σ* orbitals of the bicyclo[n.1.0]alkane cis or trans C2-H bonds and spiro[2.5]octanes axial C4-H bond hyperconjugatively interact with the Walsh orbitals of the cyclopropane ring, activating these bonds toward HAT to ETFDO. The detection of rearranged oxygenation products in the oxidation of 1-methylbicyclo[4.1.0]heptane, spiro[2.5]octane, and 6-tert-butylspiro[2.5]octane provides unambiguous evidence for the involvement of cationic intermediates in these reactions, representing the first examples on the operation of ET pathways in dioxirane-mediated C(sp3)-H bond oxygenations. Computations support these findings, showing that formation of cationic intermediates is associated with specific stabilizing hyperconjugative interactions between the incipient carbon radical and the cyclopropane C-C bonding orbitals that trigger ET to the incipient dioxirane derived 1,1,1-trifluoro-2-hydroxy-2-butoxyl radical.

Total Synthesis of (-)-5-Deoxyenterocin and Attempted Late-Stage Functionalization Reactions

The first total synthesis of (-)-5-deoxyenterocin has been accomplished starting from pentane-1,3,5-triol (16 steps in the longest linear sequence, 0.2 % overall yield). (-)-Menthone served as the source of chirality to distinguish the enantiotopic hydroxymethyl groups of the substrate. Key steps of the synthesis include two aldol reactions to either end of the C5 -skeleton, a diastereoselective hydroxylation reaction and a biomimetic twofold intramolecular aldol reaction as the final step. Although this step suffered from geometrical constraints and was low yielding (10 %), enough synthetic material could be secured to substantiate the relative and absolute configuration of the natural product. Additional experiments were directed toward a C-H functionalization at carbon atom C5. Despite the fact that several protocols could be successfully applied to (3aR)-(+)-sclareolide as model substrate, (-)-5-deoxyenterocin withstood any selective functionalization.

Synthesis of Chlorinated Oligopeptides via γ- and δ-Selective Hydrogen Atom Transfer Enabled by the N-Chloropeptide Strategy

The introduction of a chlorine atom could potentially endow peptide derivatives with notable bioactivity and applicability. However, despite considerable recent progress in C(sp3)-H functionalization chemistry, a general method for the site-selective chlorination of inert aliphatic C-H bonds in peptides still remains elusive. Herein, we report a site-selective C(sp3)-H chlorination of oligopeptides based on an N-chloropeptide strategy. N-chloropeptides, which are easily prepared from the corresponding native oligopeptides, are smoothly degraded in the presence of an appropriate copper catalyst, and a subsequent 1,5-hydrogen atom transfer affords γ- or δ-chlorinated peptides in excellent yield. A wide variety of amino acid residues can thus be site-selectively chlorinated in a predictable manner. This method hence enables the efficient synthesis of otherwise less accessible, chlorine-containing peptide fragments of natural peptides. We moreover demonstrate here the successful estimation of the stereochemistry of the chlorinated carbon atom in aquimarin A. Furthermore, we reveal that side-chain-chlorinated peptides can serve as highly useful substructures with a fine balance between stability and reactivity, which renders them promising targets for synthetic and medicinal applications.

Radical ligand transfer: a general strategy for radical functionalization

The place of alkyl radicals in organic chemistry has changed markedly over the last several decades, evolving from challenging-to-generate "uncontrollable" species prone to side reactions to versatile reactive intermediates enabling construction of myriad C-C and C-X bonds. This maturation of free radical chemistry has been enabled by several advances, including the proliferation of efficient radical generation methods, such as hydrogen atom transfer (HAT), alkene addition, and decarboxylation. At least as important has been innovation in radical functionalization methods, including radical-polar crossover (RPC), enabling these intermediates to be engaged in productive and efficient bond-forming steps. However, direct engagement of alkyl radicals remains challenging. Among these functionalization approaches, a bio-inspired mechanistic paradigm known as radical ligand transfer (RLT) has emerged as a particularly promising and versatile means of forming new bonds catalytically to alkyl radicals. This development has been driven by several key features of RLT catalysis, including the ability to form diverse bonds (including C-X, C-N, and C-S), the use of simple earth abundant element catalysts, and the intrinsic compatibility of this approach with varied radical generation methods, including HAT, radical addition, and decarboxylation. Here, we provide an overview of the evolution of RLT catalysis from initial studies to recent advances and provide a conceptual framework we hope will inspire and enable future work using this versatile elementary step.

Late-stage Functionalization for Improving Drug-like Molecular Properties

The development of late-stage functionalization (LSF) methodologies, particularly C-H functionalization, has revolutionized the field of organic synthesis. Over the past decade, medicinal chemists have begun to implement LSF strategies into their drug discovery programs, allowing for the drug discovery process to become more efficient. Most reported applications of late-stage C-H functionalization of drugs and drug-like molecules have been to rapidly diversify screening libraries to explore structure-activity relationships. However, there has been a growing trend toward the use of LSF methodologies as an efficient tool for improving drug-like molecular properties of promising drug candidates. In this review, we have comprehensively reviewed recent progress in this emerging area. Particular emphasis is placed on case studies where multiple LSF techniques were implemented to generate a library of novel analogues with improved drug-like properties. We have critically analyzed the current scope of LSF strategies to improve drug-like properties and commented on how we believe LSF can transform drug discovery in the future. Overall, we aim to provide a comprehensive survey of LSF techniques as tools for efficiently improving drug-like molecular properties, anticipating its continued uptake in drug discovery programs.

Study of Cyclohexane and Methylcyclohexane Functionalization Promoted by Manganese(III) Compounds

Alkane functionalization using safe and low-energy processes is of great interest to industry and academia. Aiming to contribute to the process of saturated hydrocarbon functionalization, we have studied a set of three manganese(III) complexes as catalysts for promoting the oxidation of saturated hydrocarbons (cyclohexane and methylcyclohexane) in the presence of hydrogen peroxide or trichloroisocyanuric acid (TCCA). The mononuclear manganese(III) compounds were prepared using the ligands H2LMet4 (6,6’-((1,4-diazepane-1,4-diyl)bis(methylene))bis(2,4-dimethylphenol), H2salen (2,2’-((1E,1’E)-(ethane-1,2-diylbis(azaneylylidene))bis(methaneylylidene))diphenol) and H2salan (2,2’-((ethane-1,2-diylbis(azanediyl))bis(methylene))diphenol). The catalytic processes were carried out in acetonitrile at 25 and 50 °C for 24 h. The increase in the temperature was important to get a better conversion. The compounds did not promote cyclohexane oxidation in the presence of H2O2. However, they were active in the presence of TCCA, employing a ratio of 1000:333:1 equivalents of the substrate:TCCA:catalyst. The best catalytic activity was shown by the compound [Mn(salen)Cl], reaching conversions of 14.5 ± 0.3% (25 °C) and 26.3 ± 1.1% (50 °C) (yield for chlorocyclohexane) and up to 12.1 ± 0.5% (25 °C) and 29.8 ± 2.2% (50 °C) (total yield for the mixture of the products 1-chloro-4-methylcyclohexane, 3-methylcyclohexene and 1-methylcyclohexene). The interaction of the catalysts with TCCA was studied using electron paramagnetic resonance (EPR), suggesting that the catalysts [Mn(LMet4)Cl] and [Mn(salan)Cl] act via a different mechanism from that observed for [Mn(salen)Cl].

Selective functionalization of C(sp3)-H bonds: catalytic chlorination and bromination by IronIII-acacen-halide under ambient condition

The oxidative catalytic halogenations of the C(sp³)-H bond of alkanes promoted by Fe^III(acacen)Cl (1III-Cl) and Fe^III(acacen)Br (1III-Br) in the presence of trifluoroacetic acid (TFA) were investigated. Four major steps were involved: (i) formation of [Fe^V(acacen)(oxo)X] species (X = Cl or Br), (ii) hydrogen-atom transfer, (iii) halogen atom rebound, and (iv) regeneration of 1III-Cl or 1III-Br. TFA played a significant role in (i) forming the high-valent iron-oxo intermediate and (ii) generating the reaction selectivity.

C(sp3)-H oxidation and chlorination catalysed by a bioinspired pincer iron(III) complex

A pincer iron(III) catalyst for the oxidation and chlorination of C(sp³)-H bonds was developed. Oxidation of a diagnostic substrate cis-decalin implies that a long-lived carbon-centred radical is involved. Mechanistic studies suggest that an Fe-oxo species could be responsible for the rate-determining C-H activation step. This report expands the scope of non-heme catalysts for C-H functionalisation.

Modular Difunctionalization of Unactivated Alkenes through Bio-Inspired Radical Ligand Transfer Catalysis

Development of visible light-mediated atom transfer radical addition of haloalkanes onto unsaturated hydrocarbons has seen rapid growth in recent years. However, due to its radical chain propagation mechanism, diverse functionality other than the pre-existing (pseudo-)halide on the alkyl halide source cannot be incorporated into target molecules in a one-step, economic fashion. Inspired by the prominent reactivities shown by cytochrome P450 hydroxylase and non-heme iron-dependent oxygenases, we herein report the first modular, dual catalytic difunctionalization of unactivated alkenes via manganese-catalyzed radical ligand transfer (RLT). This RLT elementary step involves a coordinated nucleophile rebounding to a carbon-centered radical to form a new C-X bond in analogy to the radical rebound step in metalloenzymes. The protocol leverages the synergetic cooperation of both a photocatalyst and earth-abundant manganese complex to deliver two radical species in succession to minimally functionalized alkenes, enabling modular diversification of the radical intermediate by a high-valent manganese species capable of delivering various external nucleophiles. A broad scope (97 examples, including drugs/natural product motifs), mild conditions, and excellent chemoselectivity were shown for a variety of substrates and fluoroalkyl fragments. Mechanistic and kinetics studies provide insights into the radical nature of the dual catalytic transformation and support radical ligand transfer (RLT) as a new strategy to deliver diverse functionality selectively to carbon-centered radicals.

Construction and application of base-stable MOFs: a critical review

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials constructed from organic ligands and metal ions/clusters. Owing to their unique advantages, they have attracted more and more attention in recent years and numerous studies have revealed their great potential in various applications. Many important applications of MOFs inevitably involve harsh alkaline operational environments. To achieve high performance and long cycling life in these applications, high stability of MOFs against bases is necessary. Therefore, the construction of base-stable MOFs has become a critical research direction in the MOF field. This review gives a historic summary of the development of base-stable MOFs in the last few years. The key factors that can determine the robustness of MOFs under basic conditions are analyzed. We also demonstrate the exciting achievements that have been made by utilizing base-stable MOFs in different applications. In the end, we discuss major challenges for the further development of base-stable MOFs. Some possible methods to address these problems are presented.

Resolving Oxygenation Pathways in Manganese-Catalyzed C(sp3)-H Functionalization via Radical and Cationic Intermediates

The C(sp³)–H bond oxygenation of the cyclopropane-containing mechanistic probes 6-tert-butylspiro[2.5]octane and spiro[2.5]octane with hydrogen peroxide catalyzed by manganese complexes bearing aminopyridine tetradentate ligands has been studied. Mixtures of unrearranged and rearranged oxygenation products (alcohols, ketones, and esters) are obtained, suggesting the involvement of cationic intermediates and the contribution of different pathways following the initial hydrogen atom transfer-based C–H bond cleavage step. Despite such a complex mechanistic scenario, a judicious choice of the catalyst structure and reaction conditions (solvent, temperature, and carboxylic acid) could be employed to resolve these oxygenation pathways, leading, with the former substrate, to conditions where a single unrearranged or rearranged product is obtained in good isolated yield. Taken together, the work demonstrates an unprecedented ability to precisely direct the chemoselectivity of the C–H oxidation reaction, discriminating among multiple pathways. In addition, these results conclusively demonstrate that stereospecific C(sp³)–H oxidation can take place via a cationic intermediate and that this path can become exclusive in governing product formation, expanding the available toolbox of aliphatic C–H bond oxygenations. The implications of these findings are discussed in the framework of the development of synthetically useful C–H functionalization procedures and the associated mechanistic features.

C-H bond chlorination using nickel(II) complexes of tetradentate amido-quinoline ligands

Ni(II)-tetradentate amido-quinoline complexes effectively catalysed C-H chlorination of a series of hydrocarbons in the presence of NaOCl and acetic acid. The bond dissociation energy of the C(sp³)-H bond of the substrates varies from 99.3 kcal mol^-1 (cyclohexane) to 87 kcal mol^-1 (ethyl benzene). Exclusively chlorinated products (TON: 220 for cyclohexane) were obtained without any hydroxylated products, thus mimicking the activity of the halogenase enzyme.

Electronic control over site-selectivity in hydrogen atom transfer (HAT) based C(sp3)-H functionalization promoted by electrophilic reagents

The direct functionalization of C(sp³)-H bonds represents one of the most investigated approaches to develop new synthetic methodology. Among the available strategies for intermolecular C-H bond functionalization, increasing attention has been devoted to hydrogen atom transfer (HAT) based procedures promoted by radical or radical-like reagents, that offer the opportunity to introduce a large variety of atoms and groups in place of hydrogen under mild conditions. Because of the large number of aliphatic C-H bonds displayed by organic molecules, in these processes control over site-selectivity represents a crucial issue, and the associated factors have been discussed. In this review article, attention will be devoted to the role of electronic effects on C(sp³)-H bond functionalization site-selectivity. Through an analysis of the recent literature, a detailed description of the HAT reagents employed in these processes, the associated mechanistic features and the selectivity patterns observed in the functionalization of substrates of increasing structural complexity will be provided.

Photoinduced remote regioselective radical alkynylation of unactivated C-H bonds

A method for the remote regioselective alkynylation of unactivated C(sp³)-H bonds in diverse aliphatic amides by photogenerated amidyl radicals has been developed. The site-selectivity is dominated via a 1,5-hydrogen atom transfer (HAT) process of the amide. Mild reaction conditions and high regioselectivity are demonstrated in this methodology.

Dioxygen Reactivity of Copper(I)/Manganese(II)-Porphyrin Assemblies: Mechanistic Studies and Cooperative Activation of O2

The oxidation of transition metals such as manganese and copper by dioxygen (O₂) is of great interest to chemists and biochemists for fundamental and practical reasons. In this report, the O₂ reactivities of 1:1 and 1:2 mixtures of [(TPP)Mn^II] (1; TPP: Tetraphenylporphyrin) and [(tmpa)Cu^I(MeCN)]⁺ (2; TMPA: Tris(2-pyridylmethyl)amine) in 2-methyltetrahydrofuran (MeTHF) are described. Variable-temperature (-110 °C to room temperature) absorption spectroscopic measurements support that, at low temperature, oxygenation of the (TPP)Mn/Cu mixtures leads to rapid formation of a cupric superoxo intermediate, [(tmpa)Cu^II(O₂^•-)]⁺ (3), independent of the presence of the manganese porphyrin complex (1). Complex 3 subsequently reacts with 1 to form a heterobinuclear μ-peroxo species, [(tmpa)Cu^II-(O₂^2-)-Mn^III(TPP)]⁺ (4; λ_max = 443 nm), which thermally converts to a μ-oxo complex, [(tmpa)Cu^II-O-Mn^III(TPP)]⁺ (5; λ_max = 434 and 466 nm), confirmed by electrospray ionization mass spectrometry and nuclear magnetic resonance spectroscopy. In the 1:2 (TPP)Mn/Cu mixture, 4 is subsequently attacked by a second equivalent of 3, giving a bis-μ-peroxo species, i.e., [(tmpa)Cu^II-(O₂^2-)-Mn^IV(TPP)-(O₂^2-)-Cu^II(tmpa)]²⁺ (7; λ_max = 420 nm and δ_pyrrolic = -44.90 ppm). The final decomposition product of the (TPP)Mn/Cu/O₂ chemistry in MeTHF is [(TPP)Mn^III(MeTHF)₂]⁺ (6), whose X-ray structure is also presented and compared to literature analogs.

Taming the Chlorine Radical: Enforcing Steric Control over Chlorine-Radical-Mediated C-H Activation

Chlorine radicals readily activate C-H bonds, but the high reactivity of these intermediates precludes their use in regioselective C-H functionalization reactions. We demonstrate that the secondary coordination sphere of a metal complex can confine photoeliminated chlorine radicals and afford steric control over their reactivity. Specifically, a series of iron(III) chloride pyridinediimine complexes exhibit activity for photochemical C(sp³)-H chlorination and bromination with selectivity for primary and secondary C-H bonds, overriding thermodynamic preference for weaker tertiary C-H bonds. Transient absorption spectroscopy reveals that Cl· remains confined through formation of a Cl·|arene complex with aromatic groups on the pyridinediimine ligand. Furthermore, photocrystallography confirms that this selectivity arises from the generation of Cl· within the steric environment defined by the iron secondary coordination sphere.

Cu-Catalyzed Site-Selective Benzylic Chlorination Enabling Net C-H Coupling with Oxidatively Sensitive Nucleophiles

Site-selective chlorination of benzylic C-H bonds is achieved using a CuICl/bis(oxazoline) catalyst with N-fluorobenzenesulfonimide as the oxidant and KCl as a chloride source. This method exhibits higher benzylic selectivity, relative to established chlorination protocols, and is compatible with diverse alkyl arenes. Sequential benzylic C-H chlorination/nucleophilic substitution affords C-O, C-S, and C-N coupling products with oxidatively sensitive coupling partners.

Metal–organic framework (MOF)-, covalent-organic framework (COF)-, and porous-organic polymers (POP)-catalyzed selective C–H bond activation and functionalization reactions

The review summarizes the state-of-the-art of C–H active transformations over crystalline and amorphous porous materials as new emerging heterogeneous (photo)catalysts.

Selective functionalization of benzylic C-H bonds of two different benzylic ethers by bowl-shaped N-hydroxyimide derivatives as efficient organoradical catalysts

A highly efficient, site-selective benzylic C-H bond amination of two different benzylic ether substrates was described by using bowl-shaped N-hydroxyimide organoradical catalysts with diethyl azodicarboxylate. The synthetic utility of this approach is demonstrated by the subsequent transformation of the amination products into the corresponding aldehydes and alkylhydrazines.

A biomimetic SH2 cross-coupling mechanism for quaternary sp3-carbon formation

Bimolecular homolytic substitution (SH2) is an open-shell mechanism that is implicated across a host of biochemical alkylation pathways. Surprisingly, however, this radical substitution manifold has not been generally deployed as a design element in synthetic C–C bond formation. We found that the SH2 mechanism can be leveraged to enable a biomimetic sp3-sp3 cross-coupling platform that furnishes quaternary sp3-carbon centers, a long-standing challenge in organic molecule construction. This heteroselective radical-radical coupling uses the capacity of iron porphyrin to readily distinguish between the SH2 bond-forming roles of open-shell primary and tertiary carbons, combined with photocatalysis to generate both radical classes simultaneously from widely abundant functional groups. Mechanistic studies confirm the intermediacy of a primary alkyl–Fe(III) species prior to coupling and provide evidence for the SH2 displacement pathway in the critical quaternary sp3-carbon bond formation step.

Photoinduced C(sp3)-H chlorination of amides with tetrabutyl ammonium chloride

A new protocol was developed for the site-selective C(sp³)-H chlorination of amides with tetrabutyl ammonium chloride as the chlorinating agent. The reaction features a tandem sequence that involves a (diacetoxyiodo)benzene-mediated and chloride anion-involved N-H chlorination followed by photoinitiated chlorine atom transfer. A wide variety of carboxamides and sulfonamides were chlorinated at the δ-position by using this method.

A general strategy for C(sp3)-H functionalization with nucleophiles using methyl radical as a hydrogen atom abstractor

Photoredox catalysis has provided many approaches to C(sp³)-H functionalization that enable selective oxidation and C(sp³)-C bond formation via the intermediacy of a carbon-centered radical. While highly enabling, functionalization of the carbon-centered radical is largely mediated by electrophilic reagents. Notably, nucleophilic reagents represent an abundant and practical reagent class, motivating the interest in developing a general C(sp³)-H functionalization strategy with nucleophiles. Here we describe a strategy that transforms C(sp³)-H bonds into carbocations via sequential hydrogen atom transfer (HAT) and oxidative radical-polar crossover. The resulting carbocation is functionalized by a variety of nucleophiles-including halides, water, alcohols, thiols, an electron-rich arene, and an azide-to effect diverse bond formations. Mechanistic studies indicate that HAT is mediated by methyl radical-a previously unexplored HAT agent with differing polarity to many of those used in photoredox catalysis-enabling new site-selectivity for late-stage C(sp³)-H functionalization.

Halogen Transfer to Carbon Radicals by High-Valent Iron Chloride and Iron Fluoride Corroles

High-valent iron halide corroles were examined to determine their reactivity with carbon radicals and their ability to undergo radical rebound-like processes. Beginning with Fe(Cl)(ttppc) (1) (ttppc = 5,10,15-tris(2,4,6-triphenylphenyl)corrolato^3-), the new iron corroles Fe(OTf)(ttppc) (2), Fe(OTf)(ttppc)(AgOTf) (3), and Fe(F)(ttppc) (4) were synthesized. Complexes 3 and 4 are the first iron triflate and iron fluoride corroles to be structurally characterized by single crystal X-ray diffraction. The structure of 3 reveals an Ag^I-pyrrole (η²-π) interaction. The Fe(Cl)(ttppc) and Fe(F)(ttppc) complexes undergo halogen transfer to triarylmethyl radicals, and kinetic analysis of the reaction between (p-OMe-C₆H₄)₃C• and 1 gave k = 1.34(3) × 10³ M^-1 s^-1 at 23 °C and 2.2(2) M^-1 s^-1 at -60 °C, ΔH^⧧ = +9.8(3) kcal mol^-1, and ΔS^⧧ = -14(1) cal mol^-1 K^-1 through an Eyring analysis. Complex 4 is significantly more reactive, giving k = 1.16(6) × 10⁵ M^-1 s^-1 at 23 °C. The data point to a concerted mechanism and show the trend X = F^- > Cl^- > OH^- for Fe(X)(ttppc). This study provides mechanistic insights into halogen rebound for an iron porphyrinoid complex.

Sustainable manganese catalysis for late-stage C-H functionalization of bioactive structural motifs

The late-stage C–H functionalization of bioactive structural motifs is a powerful synthetic strategy for accessing advanced agrochemicals, bioimaging materials, and drug candidates, among other complex molecules. While traditional late-stage diversification relies on the use of precious transition metals, the utilization of 3d transition metals is an emerging approach in organic synthesis. Among the 3d metals, manganese catalysts have gained increasing attention for late-stage diversification due to the sustainability, cost-effectiveness, ease of operation, and reduced toxicity. Herein, we summarize recent manganese-catalyzed late-stage C–H functionalization reactions of biologically active small molecules and complex peptides.

Deciphering Reactivity and Selectivity Patterns in Aliphatic C-H Bond Oxygenation of Cyclopentane and Cyclohexane Derivatives

A kinetic, product, and computational study on the reactions of the cumyloxyl radical with monosubstituted cyclopentanes and cyclohexanes has been carried out. HAT rates, site-selectivities for C-H bond oxidation, and DFT computations provide quantitative information and theoretical models to explain the observed patterns. Cyclopentanes functionalize predominantly at C-1, and tertiary C-H bond activation barriers decrease on going from methyl- and tert-butylcyclopentane to phenylcyclopentane, in line with the computed C-H BDEs. With cyclohexanes, the relative importance of HAT from C-1 decreases on going from methyl- and phenylcyclohexane to ethyl-, isopropyl-, and tert-butylcyclohexane. Deactivation is also observed at C-2 with site-selectivity that progressively shifts to C-3 and C-4 with increasing substituent steric bulk. The site-selectivities observed in the corresponding oxidations promoted by ethyl(trifluoromethyl)dioxirane support this mechanistic picture. Comparison of these results with those obtained previously for C-H bond azidation and functionalizations promoted by the PINO radical of phenyl and tert-butylcyclohexane, together with new calculations, provides a mechanistic framework for understanding C-H bond functionalization of cycloalkanes. The nature of the HAT reagent, C-H bond strengths, and torsional effects are important determinants of site-selectivity, with the latter effects that play a major role in the reactions of oxygen-centered HAT reagents with monosubstituted cyclohexanes.

Copper(I)-catalysed site-selective C(sp3)-H bond chlorination of ketones, (E)-enones and alkylbenzenes by dichloramine-T

Strategies that enable intermolecular site-selective C-H bond functionalisation of organic molecules provide one of the cornerstones of modern chemical synthesis. In chloroalkane synthesis, such methods for intermolecular site-selective aliphatic C-H bond chlorination have, however, remained conspicuously rare. Here, we present a copper(I)-catalysed synthetic method for the efficient site-selective C(sp3)-H bond chlorination of ketones, (E)-enones and alkylbenzenes by dichloramine-T at room temperature. A key feature of the broad substrate scope is tolerance to unsaturation, which would normally pose an immense challenge in chemoselective aliphatic C-H bond functionalisation. By unlocking dichloramine-T's potential as a chlorine radical atom source, the product site-selectivities achieved are among the most selective in alkane functionalisation and should find widespread utility in chemical synthesis. This is exemplified by the late-stage site-selective modification of a number of natural products and bioactive compounds, and gram-scale preparation and formal synthesis of two drug molecules.

Manganese/bipyridine-catalyzed non-directed C(sp3)-H bromination using NBS and TMSN3

A Mn(II)/bipyridine-catalyzed bromination reaction of unactivated aliphatic C(sp³)−H bonds has been developed using N-bromosuccinimide (NBS) as the brominating reagent. The reaction proceeded in moderate-to-good yield, even on a gram scale. The introduced bromine atom can be converted into fluorine and allyl groups.

Site Selective Chlorination of C(sp3 )-H Bonds Suitable for Late-Stage Functionalization

C(sp³ )-Cl bonds are present in numerous biologically active small molecules, and an ideal route for their preparation is by the chlorination of a C(sp³ )-H bond. However, most current methods for the chlorination of C(sp³ )-H bonds are insufficiently site selective and tolerant of functional groups to be applicable to the late-stage functionalization of complex molecules. We report a method for the highly selective chlorination of tertiary and benzylic C(sp³ )-H bonds to produce the corresponding chlorides, generally in high yields. The reaction occurs with a mixture of an azidoiodinane, which generates a selective H-atom abstractor under mild conditions, and a readily-accessible and inexpensive copper(II) chloride complex, which efficiently transfers a chlorine atom. The reaction's exceptional functional group tolerance is demonstrated by the chlorination of >30 diversely functionalized substrates and the late-stage chlorination of a dozen derivatives of natural products and active pharmaceutical ingredients.

Practical and Selective sp3 C-H Bond Chlorination via Aminium Radicals

The introduction of chlorine atoms into organic molecules is fundamental to the manufacture of industrial chemicals, the elaboration of advanced synthetic intermediates and also the fine-tuning of physicochemical and biological properties of drugs, agrochemicals and polymers. We report here a general and practical photochemical strategy enabling the site-selective chlorination of sp3 C-H bonds. This process exploits the ability of protonated N-chloroamines to serve as aminium radical precursors and also radical chlorinating agents. Upon photochemical initiation, an efficient radical-chain propagation is established allowing the functionalization of a broad range of substrates due to the large number of compatible functionalities. The ability to synergistically maximize both polar and steric effects in the H-atom transfer transition state through appropriate selection of the aminium radical has provided the highest known selectivity in radical sp3 C-H chlorination.

A Modular, Argon-Driven Flow Platform for Natural Product Synthesis and Late-Stage Transformations

A modular flow platform for natural product synthesis was designed. To access different reaction setups with a maximum of flexibility, interchangeable 3D-printed components serve as backbone. By switching from liquid- to gas-driven flow, reagent and solvent waste is minimized, which translates into an advantageous sustainability profile. To enable inert conditions, "Schlenk-in-flow" techniques for the safe handling of oxygen- and moisture sensitive reagents were developed. Adopting these techniques, reproducible transformations in natural product synthesis were achieved.

The Recurring Roles of Chlorine in Synthetic and Biological Studies of the Lissoclimides

Halogenated natural products number in the thousands, but only in rare cases are the evolutionary advantages conferred by the halogens understood. We set out to investigate the lissoclimide family of cytotoxins, which includes several chlorinated members, because of our long-standing interest in the synthesis of chlorinated secondary metabolites.Our initial success in this endeavor was a semisynthesis of chlorolissoclimide (CL) from the commercially available sesquiterpenoid sclareolide. Featuring a highly selective and efficient-and plausibly biomimetic-C-H chlorination, we were able to access enough CL for collaborative studies, including X-ray cocrystallography with the eukaryotic ribosome. Through this experiment, we learned that CL's chlorine atom engages in a novel halogen-π dispersion interaction with a neighboring nucleobase in the ribosome E-site.Owing to the limitations of our semisynthesis approach, we established an analogue-oriented approach to access numerous lissoclimide compounds to both improve our understanding of structure-activity relationships and to learn more about the halogen-π interaction. In the course of these studies, we made over a dozen lissoclimide-like compounds, the most interesting of which contained chlorine-bearing carbons with unnatural configurations. Rationalizing the retained potency of these compounds that appeared to be a poor fit for the lissoclimide binding pocket, we came to realize that the chlorine atoms would engage in these same halogen-π interactions even at the expense of a chair to twist-boat conformational change, which also permitted the compounds to fit in the binding site.Finally, because neither of the first two approaches could easily access the most potent natural lissoclimides, we designed a synthesis that took advantage of rarely used terminal epoxides to initiate polyene cyclizations. In this case, the chlorine atom was incorporated early and helped control the stereochemical outcome of the key step.Over the course of this project, three different synthesis approaches were designed and executed, and our ability to access numerous lissoclimides fueled a range of collaborative biological studies. Further, chlorine played impactful roles throughout various aspects of both synthesis and biology. We remain inspired to learn more about the mechanism of action of these compounds and to deeply investigate the potentially valuable halogen-π dispersion interaction in the context of small molecule/nucleic acid binding. In that context, our work offers an instance wherein we might have gained a rudimentary understanding of the evolutionary importance of the halogen in a halogenated natural product.

Photo-induced copper-catalyzed alkynylation and amination of remote unactivated C(sp3)-H bonds

A method for remote radical C-H alkynylation and amination of diverse aliphatic alcohols has been developed. The reaction features a copper nucleophile complex formed in situ as a photocatalyst, which reduces the silicon-tethered aliphatic iodide to an alkyl radical to initiate 1,n-hydrogen atom transfer. Unactivated secondary and tertiary C-H bonds at β, γ, and δ positions can be functionalized in a predictable manner.

Modulating alkene reactivity from oxygenation to halogenation via electrochemical O2 activation by Mn porphyrin

Oxidation of organic substrates is achieved in nature under mild conditions thanks to metalloenzymes but remains a challenge for chemists. Herein we show by UV-Vis spectroelectrochemistry that when MnIIITPPCl is electrochemically reduced to MnII in CH2Cl2 under O2, a MnIIO2˙ species is generated. Benzoic anhydride reacts with the latter triggering a catalytic current in cyclic voltammetry. Electrolysis on the catalytic wave in the presence of cyclooctene leads to its oxygenation or halogenation depending on the axial ligand present as reported here for the first time.