Selective, Room-Temperature Transformation of Methane to C1 Oxygenates by Deep UV Photolysis over Zeolites

Role of Hydroxyl Groups in Zn-containing Nanosized MFI Zeolite for the Photocatalytic Oxidation of Methane

The effective conversion of methane to a mixture of more valuable hydrocarbons and hydrogen under mild conditions is a significant scientific and practical challenge. Here, we synthesized Zn-containing nanosized MFI zeolite for direct oxidation of methane in the presence of H2O and air. The presence of the surface hydroxyl groups on nanosized MFI-type zeolite and their significant reduction in the Zn-containing nanosized MFI zeolite were confirmed with Infrared Fourier Transform (FTIR) spectroscopy. Incorporation of zinc atoms into the framework of nanosized MFI zeolite is revealed by Nuclear Magnetic Resonance, X-ray Diffraction and UV-Vis Spectroscopy. Unexpectedly, pure silica MFI zeolite exhibited the highest photocatalytic performance. Our findings demonstrated that large number of isolated silanol groups and silanol nests increase the formation of ⋅OH, and enhance the productivity of oxygenate compounds and C2H6, while the Zn incorporated into the zeolite framework or attached to the silanol nests of the nanosized zeolites are less efficient. A mechanism of photocatalytic methane oxidation is proposed. These findings provide insights into the development of active nanosized zeolite photocatalysts with an extended amount of surface hydroxyl groups that can play a key role in photocatalytic methane conversion.

Reactivity of Atomic Oxygen Radical Anions in Metal Oxide Clusters

Atomic oxygen radical anion (O⋅-) represents an important type of reactive centre that exists in both chemical and biological systems. Gas-phase atomic clusters can be studied under isolated and well controlled conditions. Studies of O⋅--containing clusters in the gas-phase provide a unique strategy to interpret the chemistry of O⋅- radicals at a strictly molecular level. This review summarizes the research progresses made since 2013 for the reactivity of O⋅- radicals in the atomically precise metal oxide clusters including negatively charged, nanosized, and neutral heteronuclear metal clusters benefitting from the development of advanced experimental techniques. New electronic and geometric factors to control the reactivity and product selectivity of O⋅- radicals under dark and photo-irradiation conditions have been revealed. The detailed mechanisms of O⋅- generation have been discussed for the reaction systems of nanosized and heteroatom-doped metal oxide clusters. The catalytic reactions mediated by the O⋅- radicals in metal clusters have also been successfully established and the microscopic mechanisms about the dynamic generation and depletion of O⋅- radicals have been clearly understood. The studies of O⋅- containing metal oxide clusters in the gas-phase provided new insights into the chemistry of reactive oxygen species in related condensed-phase systems.

Imogolite Nanotubes and Their Permanently Polarized Bifunctional Surfaces for Photocatalytic Hydrogen Production

To date, imogolite nanotubes (INTs) have been primarily used for environmental applications such as dye and pollutant degradation. However, imogolite's well-defined porous structure and distinctive electro-optical properties have prompted interest in the system's potential for energy-relevant chemical reactions. The imogolite structure leads to a permanent intrawall polarization arising from the presence of bifunctional surfaces at the inner and outer tube walls. Density functional theory simulations suggest such bifunctionality to encompass also spatially separated band edges. Altogether, these elements make INTs appealing candidates for facilitating chemical conversion reactions. Despite their potential, the exploitation of imogolite's features for photocatalysis is at its infancy, thence relatively unexplored. This perspective overviews the basic physical-chemical and optoelectronical properties of imogolite nanotubes, emphasizing their role as wide bandgap insulator. Imogolite nanotubes have multifaceted properties that could lead to beneficial outcomes in energy-related applications. This work illustrates two case studies demonstrating a step-forward on photocatalytic hydrogen production achieved through atomic doping or metal co-catalyst. INTs exhibit potential in energy conversion and storage, due to their ability to accommodate functions such as enhancing charge separation and influencing the chemical potentials of interacting species. Yet, tapping into potential for energy-relevant application needs further experimental research, computational, and theoretical analysis.

Photocatalytic non-oxidative conversion of methane

The direct conversion of methane to hydrogen and high-value hydrocarbons under mild conditions is an ideal, carbon-neutral method for utilizing natural gas resources. Compared with traditional high-temperature thermal catalytic methods, using clean light energy to activate inert C-H bonds in methane can not only significantly reduce the reaction temperature and avoid catalyst deactivation, but also surpass the limitations of thermodynamic equilibrium and provide new reaction pathways. This paper provides a comprehensive review of developments in the field of photocatalytic non-oxidative conversion of methane (PNOCM), while also highlighting our contributions, particularly focusing on catalyst design, product selectivity, and the underlying photophysical and chemical mechanisms. The challenges and potential solutions are also evaluated. The goal of this feature article is to establish a foundational understanding and stimulate further research in this emerging area.

A Plant Dye for Photocatalytic Methane Conversion

A metal-free natural dye has been developed to selectively convert methane to methyl trifluoroacetate (CH3 TFA) using visible light, probably due to the formation of a chloride-bridged dimer undergoing fast intra-complex charge transfer.

Recent Advances in the Catalytic Conversion of Methane to Methanol: From the Challenges of Traditional Catalysts to the Use of Nanomaterials and Metal-Organic Frameworks

Methane and carbon dioxide are the main contributors to global warming, with the methane effect being 25 times more powerful than carbon dioxide. Although the sources of methane are diverse, it is a very volatile and explosive gas. One way to store the energy content of methane is through its conversion to methanol. Methanol is a liquid under ambient conditions, easy to transport, and, apart from its use as an energy source, it is a chemical platform that can serve as a starting material for the production of various higher-value products. Accordingly, the transformation of methane to methanol has been extensively studied in the literature, using traditional catalysts as different types of zeolites. However, in the last few years, a new generation of catalysts has emerged to carry out this transformation with higher conversion and selectivity, and more importantly, under mild temperature and pressure conditions. These new catalysts typically involve the use of a highly porous supporting material such as zeolite, or more recently, metal-organic frameworks (MOFs) and graphene, and metallic nanoparticles or a combination of different types of nanoparticles that are the core of the catalytic process. In this review, recent advances in the porous supports for nanoparticles used for methane oxidation to methanol under mild conditions are discussed.

High-density frustrated Lewis pairs based on Lamellar Nb2O5 for photocatalytic non-oxidative methane coupling

Photocatalytic methane conversion requires a strong polarization environment composed of abundant activation sites with the robust stretching ability for C-H scissoring. High-density frustrated Lewis pairs consisting of low-valence Lewis acid Nb and Lewis base Nb-OH are fabricated on lamellar Nb₂O₅ through a thermal-reduction promoted phase-transition process. Benefitting from the planar atomic arrangement of lamellar Nb₂O₅, the frustrated Lewis pairs sites are highly exposed and accessible to reactants, which results in a superior methane conversion rate of 1456 μmol g^-1 h^-1 for photocatalytic non-oxidative methane coupling without the assistance of noble metals. The time-dependent DFT calculation demonstrates the photo-induced electron transfer from LA to LB sites enhances their intensities in a concerted way, promoting the C-H cleavage through the coupling of LA and LB. This work provides in-depth insight into designing and constructing a polarization micro-environment for photocatalytic C-H activation of methane without the assistance of noble metals.

Analysis of the Scale of Global Human Needs and Opportunities for Sustainable Catalytic Technologies

We analyzed the enormous scale of global human needs, their carbon footprint, and how they are connected to energy availability. We established that most challenges related to resource security and sustainability can be solved by providing distributed, affordable, and clean energy. Catalyzed chemical transformations powered by renewable electricity are emerging successor technologies that have the potential to replace fossil fuels without sacrificing the wellbeing of humans. We highlighted the technical, economic, and societal advantages and drawbacks of short- to medium-term decarbonization solutions to gauge their practicability, economic feasibility, and likelihood for widespread acceptance on a global scale. We detailed catalysis solutions that enhance sustainability, along with strategies for catalyst and process development, frontiers, challenges, and limitations, and emphasized the need for planetary stewardship. Electrocatalytic processes enable the production of solar fuels and commodity chemicals that address universal issues of the water, energy and food security nexus, clothing, the building sector, heating and cooling, transportation, information and communication technology, chemicals, consumer goods and services, and healthcare, toward providing global resource security and sustainability and enhancing environmental and social justice.

Selective CH4 Partial Photooxidation by Positively Charged Metal Clusters Anchored on Carbon Aerogel under Mild Conditions

Selective partial photooxidation of CH₄ into value-added chemicals under mild conditions still remains a huge bottleneck. Herein, we design positively charged metal clusters anchored on a three-dimensional porous carbon aerogel. With 0.75FeCA800-4 as an example, X-ray photoelectron spectra and Raman spectra disclose that the iron sites are positively charged. In situ electron paramagnetic resonance spectra show that the Fe^δ+ sites could donate electrons to activate CH₄ into CH₄^- by virtue of the excited-state carbon atoms; meanwhile, they could convert H₂O₂ into ^•OH radicals under irradiation. In addition, in situ diffuse Fourier-transform infrared spectra suggest the CH₃OOH obtained is derived from CH₄ oxidation by the hydroxylation of *CH₃ and *CH₃O intermediates. Consequently, 0.75FeCA800-4 displays a CH₃OOH selectivity of near 100% and a CH₃OOH evolution rate of 13.2 mmol g_Fe^-1 h^-1, higher than those of most previously reported supported catalysts under similar conditions.

Photocatalytic Conversion of Methane: Recent Advancements and Prospects

Abundant and affordable methane is not only a high-quality fossil fuel, it is also a raw material for the synthesis of value-added chemicals. Solar-energy-driven conversion of methane offers a promising approach to directly transform methane to valuable energy sources under mild conditions, but remains a great challenge at present. In this Review, recent advances in the photocatalytic conversion of methane are systematically summarized. Insights into the construction of effective semiconductor-based photocatalysts from the perspective of light-absorption units and active centers are highlighted and discussed in detail. The performance of various photocatalysts in the conversion of methane is presented, with the photooxidation classified according to the oxidant systems. Lastly, challenges and future perspectives in the photocatalytic oxidation of methane are described.

Nanostructured Photocatalysts for the Production of Methanol from Methane and Water

The direct photocatalytic conversion of methane into methanol with water at room temperature and pressure has attracted particular attention in recent decades. Valuable insight has been obtained into the reaction mechanisms and the key descriptors that control photoactivity and selectivity. This Minireview highlights the different efforts that have been undergone on the design of nanostructured photocatalytic systems to enhance the selectivity to methanol. The effect of structural and electronic aspects, such as surface area, morphologies, crystal facets, redox properties, metal doping, and heterojunctions, on photocatalytic performance, are discussed. The roles of free hydroxyl radicals and/or hydroxy groups for methane activation on the photocatalyst surface are also presented. This Minireview aims to provide an insight into the optimal properties and configurations of the nanostructured photocatalytic materials for tuning their reactivity on the selective oxidation of CH₄ to methanol with water. The remaining challenges and promising directions for bringing this technology a step closer to real-world application are also highlighted.

Catalytic Oxidation of Methane to Oxygenated Products: Recent Advancements and Prospects for Electrocatalytic and Photocatalytic Conversion at Low Temperatures

Methane is an important fossil fuel and widely available on the earth's crust. It is a greenhouse gas that has more severe warming effect than CO2. Unfortunately, the emission of methane into the atmosphere has long been ignored and considered as a trivial matter. Therefore, emphatic effort must be put into decreasing the concentration of methane in the atmosphere of the earth. At the same time, the conversion of less valuable methane into value-added chemicals is of significant importance in the chemical and pharmaceutical industries. Although, the transformation of methane to valuable chemicals and fuels is considered the "holy grail," the low intrinsic reactivity of its C-H bonds is still a major challenge. This review discusses the advancements in the electrocatalytic and photocatalytic oxidation of methane at low temperatures with products containing oxygen atom(s). Additionally, the future research direction is noted that may be adopted for methane oxidation via electrocatalysis and photocatalysis at low temperatures.

How to Constrain Metal-Oxyl Bonds on a Solid Surface? Lesson from Isovalent Zn(II)-Oxyl and Ga(III)-Oxyl Bonds Isolated in Zeolite Matrix

Isolation of the atomic O radical anion bound to a metal ion (metal-oxyl) on solid surfaces is highly desirable for an understanding of how we should design the surface structure for using oxyl as the reactive site. Owing to the analytical difficulty of oxyl, however, even identification of oxyl remains scarce. Herein, we report isovalent Zn^II-oxyl and Ga^III-oxyl bonds isolated in the zeolite matrix. Close similarities in reactivity, spectroscopic property, and bonding nature were observed between them, but their site requirements were entirely different; the former is generated at the monovalent ion-exchangeable site, whereas the latter at the divalent ion-exchangeable site. This study strongly suggests that tuning the polarization of the metal-oxygen bond using the charge-controlled lattice oxygens is a useful way to constrain surface metal-oxyl bonds.

Applications of Zeolites to C1 Chemistry: Recent Advances, Challenges, and Opportunities

C1 chemistry, which is the catalytic transformation of C1 molecules including CO, CO₂ , CH₄ , CH₃ OH, and HCOOH, plays an important role in providing energy and chemical supplies while meeting environmental requirements. Zeolites are highly efficient solid catalysts used in the chemical industry. The design and development of zeolite-based mono-, bi-, and multifunctional catalysts has led to a booming application of zeolite-based catalysts to C1 chemistry. Combining the advantages of zeolites and metallic catalytic species has promoted the catalytic production of various hydrocarbons (e.g., methane, light olefins, aromatics, and liquid fuels) and oxygenates (e.g., methanol, dimethyl ether, formic acid, and higher alcohols) from C1 molecules. The key zeolite descriptors that influence catalytic performance, such as framework topologies, nanoconfinement effects, Brønsted acidities, secondary-pore systems, particle sizes, extraframework cations and atoms, hydrophobicity and hydrophilicity, and proximity between acid and metallic sites are discussed to provide a deep understanding of the significance of zeolites to C1 chemistry. An outlook regarding challenges and opportunities for the conversion of C1 resources using zeolite-based catalysts to meet emerging energy and environmental demands is also presented.

Solid wetting-layers in inorganic nano-reactors: the water in imogolite nanotube case

By combined use of wide-angle X-ray scattering, thermo-gravimetric analysis, inelastic neutron scattering, density functional theory and density functional theory molecular dynamics simulations, we investigate the structure, dynamics and stability of the water wetting-layer in single-walled aluminogermanate imogolite nanotubes (SW Ge-INTs): an archetypal system for synthetically controllable and monodisperse nano-reactors. We demonstrate that the water wetting-layer is strongly bound and solid-like up to 300 K under atmospheric pressure, with dynamics markedly different from that of bulk water. Atomic-scale characterisation of the wetting-layer reveals organisation of the H₂O molecules in a curved triangular sublattice stabilised by the formation of three H-bonds to the nanotube's inner surface, with covalent interactions sufficiently strong to promote energetically favourable decoupling of the H₂O molecules in the adlayer. The evidenced changes in the local composition, structure, electrostatics and dynamics of the Ge-INT's inner surface upon the formation of the solid wetting-layer demonstrate solvent-mediated functionalisation of the nanotube's cavity at room temperature and pressure, suggesting new strategies for the design of nano-rectors towards potential control of chemical reactivity in nano-confined volumes.

The Role of Cation-Vacancies for the Electronic and Optical Properties of Aluminosilicate Imogolite Nanotubes: A Non-local, Linear-Response TDDFT Study

We report a combined non-local (PBE-TC-LRC) Density Functional Theory (DFT) and linear-response time-dependent DFT (LR-TDDFT) study of the structural, electronic, and optical properties of the cation-vacancy based defects in aluminosilicate (AlSi) imogolite nanotubes (Imo-NTs) that have been recently proposed on the basis of Nuclear Magnetic Resonance (NMR) experiments. Following numerical determination of the smallest AlSi Imo-NT model capable of accommodating the defect-induced relaxation with negligible finite-size errors, we analyse the defect-induced structural deformations in the NTs and ensuing changes in the NTs' electronic structure. The NMR-derived defects are found to introduce both shallow and deep occupied states in the pristine NTs' band gap (BG). These BG states are found to be highly localized at the defect site. No empty defect-state is modeled for any of the considered systems. LR-TDDFT simulation of the defects reveal increased low-energy optical absorbance for all but one defects, with the appearance of optically active excitations at energies lower than for the defect-free NT. These results enable interpretation of the low-energy tail in the experimental UV-vis spectra for AlSi NTs as being due to the defects. Finally, the PBE-TC-LRC-approximated exciton binding energy for the defects' optical transitions is found to be substantially lower (up to 0.8 eV) than for the pristine defect-free NT's excitations (1.1 eV).

Room-Temperature Activation of the C-H Bond in Methane over Terminal ZnII-Oxyl Species in an MFI Zeolite: A Combined Spectroscopic and Computational Study of the Reactive Frontier Molecular Orbitals and Their Origins

Oxygenase reactivity toward selective partial oxidation of CH₄ to CH₃OH requires an atomic oxygen-radical bound to metal (M-O^•: oxyl intermediate) that is capable of abstracting an H atom from the significantly strong C-H bond in CH₄. Because such a reaction is frequently observed in metal-doped zeolites, it has been recognized that the zeolite provides an environment that stabilizes the M-O^• intermediate. However, no experimental data of M-O^• have so far been discovered in the zeolite; thus, little is known about the correlation among the state of M-O^•, its reactivity for CH₄, and the nature of the zeolite environment. Here, we report a combined spectroscopic and computational study of the room-temperature activation of CH₄ over Zn^II-O^• in the MFI zeolite. One Zn^II-O^• species does perform H-abstraction from CH₄ at room temperature. The resultant CH₃^• species reacts with the other Zn^II-O^• site to form the Zn^II-OCH₃ species. The H₂O-assisted extraction of surface methoxide yields 29 μmol g^-1 of CH₃OH with a 94% selectivity. The quantum mechanics (QM)/molecular mechanics (MM) calculation determined the central step as the oxyl-mediated hydrogen atom transfer which requires an activation energy of only 10 kJ mol^-1. On the basis of the findings in gas-phase experiments regarding the CH₄ activation by the free [M-O^•]⁺ species, the remarkable H-abstraction reactivity of the Zn^II-O^• species in zeolites was totally rationalized. Additionally, the experimentally validated QM/MM calculation revealed that the zeolite lattice has potential as the ligand to enhance the polarization of the M-O^• bond and thereby enables to create effectively the highly reactive M-O^• bond required for low-temperature activation of CH₄. The present study proposes that tuning of the polarization effect of the anchoring site over heterogeneous catalysts is the valuable way to create the oxyl-based functionality on the heterogeneous catalyst.

Photochemistry and Photophysics in Silica-Based Materials: Ultrafast and Single Molecule Spectroscopy Observation

Silica-based materials (SBMs) are widely used in catalysis, photonics, and drug delivery. Their pores and cavities act as hosts of diverse guests ranging from classical dyes to drugs and quantum dots, allowing changes in the photochemical behavior of the confined guests. The heterogeneity of the guest populations as well as the confinement provided by these hosts affect the behavior of the formed hybrid materials. As a consequence, the observed reaction dynamics becomes significantly different and complex. Studying their photobehavior requires advanced laser-based spectroscopy and microscopy techniques as well as computational methods. Thanks to the development of ultrafast (spectroscopy and imaging) tools, we are witnessing an increasing interest of the scientific community to explore the intimate photobehavior of these composites. Here, we review the recent theoretical and ultrafast experimental studies of their photodynamics and discuss the results in comparison to those in homogeneous media. The discussion of the confined dynamics includes solvation and intra- and intermolecular proton-, electron-, and energy transfer events of the guest within the SBMs. Several examples of applications in photocatalysis, (photo)sensors, photonics, photovoltaics, and drug delivery demonstrate the vast potential of the SBMs in modern science and technology.

Chemically Selective Alternatives to Photoferroelectrics for Polarization-Enhanced Photocatalysis: The Untapped Potential of Hybrid Inorganic Nanotubes

Linear-scaling density functional theory simulation of methylated imogolite nanotubes (NTs) elucidates the interplay between wall-polarization, bands separation, charge-transfer excitation, and tunable electrostatics inside and outside the NT-cavity. The results suggest that integration of polarization-enhanced selective photocatalysis and chemical separation into one overall dipole-free material should be possible. Strategies are proposed to increase the NT polarization for maximally enhanced electron-hole separation.

Methane conversion into different hydrocarbons or oxygenates: current status and future perspectives in catalyst development and reactor operation

This Perspective highlights recent developments in methane conversion into different hydrocarbons and C₁-oxygenates. Our analysis identified possible directions for further research to bring the above approaches to a commercial level.

The potential of imogolite nanotubes as (co-)photocatalysts: a linear-scaling density functional theory study

We report a linear-scaling density functional theory (DFT) study of the structure, wall-polarization absolute band-alignment and optical absorption of several, recently synthesized, open-ended imogolite (Imo) nanotubes (NTs), namely single-walled (SW) aluminosilicate (AlSi), SW aluminogermanate (AlGe), SW methylated aluminosilicate (AlSi-Me), and double-walled (DW) AlGe NTs. Simulations with three different semi-local and dispersion-corrected DFT-functionals reveal that the NT wall-polarization can be increased by nearly a factor of four going from SW-AlSi-Me to DW-AlGe. Absolute vacuum alignment of the NT electronic bands and comparison with those of rutile and anatase TiO2 suggest that the NTs may exhibit marked propensity to both photo-reduction and hole-scavenging. Characterization of the NTs' band-separation and optical properties reveal the occurrence of (near-)UV inside-outside charge-transfer excitations, which may be effective for electron-hole separation and enhanced photocatalytic activity. Finally, the effects of the NTs' wall-polarization on the absolute alignment of electron and hole acceptor states of interacting water (H2O) molecules are quantified and discussed.

Improved selectivity for partial oxidation of methane to methanol in the presence of nitrite ions and BiVO4 photocatalyst

Nitrite ions are shown to significantly improve the selectivity of the photocatalytic oxidation of methane to methanol.

Effect of Anharmonicity on Adsorption Thermodynamics

The effect of anharmonic corrections to the vibrational energies of extended systems is explored. Particular attention is paid to the thermodynamics of adsorption of small molecules on catalytically relevant systems typically affected by anharmonicity. The implemented scheme obtains one-dimensional anharmonic model potentials by distorting the equilibrium structure along the normal modes using both rectilinear (Cartesian) or curvilinear (internal) representations. Only in the latter case, the modes are decoupled also at higher order of the potential and the thermodynamic functions change in the expected directions. The method is applied to calculate ab initio enthalpies, entropies, and Gibbs free energies for the adsorption of methane in acidic chabazite (H-CHA) and on MgO(001) surface. The values obtained for the adsorption of methane in H-CHA (273.15 K, 0.1 MPa, θ = 0.5) are ΔH = -19.3, -TΔS = 11.9, and ΔG = -7.5 kJ/mol. For methane on the MgO(001) (47 K, 1.3 × 10(-14) MPa, θ = 1) ΔH = -14.4, -TΔS = 16.6, and ΔG = 2.1 kJ/mol are obtained. The calculated desorption temperature is 44 K, and the desorption prefactor is 4.26 × 10(12) s(-1). All calculated results agree within chemical accuracy limits with experimental data.

Oxidative methane upgrading

The economically viable oxidative upgrading of methane presents one of the most difficult but rewarding challenges within catalysis research. Its potential to revolutionalise the chemical value chain, coupled with the associated supremely challenging scientific aspects, has ensured this topic's high popularity over the preceeding decades. Herein, we report a non-exhaustive account of the current developments within the field of oxidative methane upgrading and summarise the pertaining challenges that have yet to be solved.