Lyotropic Liquid Crystals Formed from ACHC-Rich β-Peptides

Twisted Structures in Natural and Bioinspired Molecules: Self-Assembly and Propagation of Chirality Across Multiple Length Scales

Several biomolecules can form dynamic aggregates in water, whose nanometric structures often reflect the chirality of the monomers in unexpected ways. Their twisted organization can be further propagated to the mesoscale, in chiral liquid crystalline phases, and even to the macroscale, where chiral, layered architectures contribute to the chromatic and mechanical properties of various plant, insect, and animal tissues. At all scales, the resulting organization is determined by a subtle balance among chiral and nonchiral interactions, whose understanding and fine-tuning is fundamental also for applications. We present recent advances in the chiral self-assembly and mesoscale ordering of biological and bioinspired molecules in water, focusing on systems based on nucleic acids or related aromatic molecules, oligopeptides, and their hybrid stuctures. We highlight the common features and key mechanisms governing this wide range of phenomena, together with novel characterization approaches.

The application of the hierarchical approach for the construction of foldameric peptide self-assembled nanostructures

In this paper, we show that a hierarchical approach for the construction of nanofibrils based on α,β-peptide foldamers is a rational method for the design of novel self-assembled nanomaterials based on peptides. Incorporation of a trans-(1S,2S)-2-aminocyclopentanecarboxylic acid residue into the outer positions of the model coiled-coil peptide led to the formation of helical foldamers, which was determined by circular dichroism (CD) and vibrational spectroscopy. The oligomerization state of the obtained peptides in water was established by analytical ultracentrifugation (AUC). The thioflavin T assay and Congo red methods showed that the obtained α,β-peptides possess a strong tendency to aggregate, leading to the formation of self-assembled nanostructures, which were assessed by microscopic techniques. The location of the β-amino acid in the heptad repeat of the coiled-coil structure proved to have an influence on the secondary structure of the obtained peptides and on the morphology of the self-assembled nanostructures.

Structures of synthetic helical filaments and tubes based on peptide and peptido-mimetic polymers

Synthetic peptide and peptido-mimetic filaments and tubes represent a diverse class of nanomaterials with a broad range of potential applications, such as drug delivery, vaccine development, synthetic catalyst design, encapsulation, and energy transduction. The structures of these filaments comprise supramolecular polymers based on helical arrangements of subunits that can be derived from self-assembly of monomers based on diverse structural motifs. In recent years, structural analyses of these materials at near-atomic resolution (NAR) have yielded critical insights into the relationship between sequence, local conformation, and higher-order structure and morphology. This structural information offers the opportunity for development of new tools to facilitate the predictable and reproduciblede novodesign of synthetic helical filaments. However, these studies have also revealed several significant impediments to the latter process – most notably, the common occurrence of structural polymorphism due to the lability of helical symmetry in structural space. This article summarizes the current state of knowledge on the structures of designed peptide and peptido-mimetic filamentous assemblies, with a focus on structures that have been solved to NAR for which reliable atomic models are available.

Hierarchical Nanomaterials Assembled from Peptoids and Other Sequence-Defined Synthetic Polymers

In nature, the self-assembly of sequence-specific biopolymers into hierarchical structures plays an essential role in the construction of functional biomaterials. To develop synthetic materials that can mimic and surpass the function of these natural counterparts, various sequence-defined bio- and biomimetic polymers have been developed and exploited as building blocks for hierarchical self-assembly. This review summarizes the recent advances in the molecular self-assembly of hierarchical nanomaterials based on peptoids (or poly-N-substituted glycines) and other sequence-defined synthetic polymers. Modern techniques to monitor the assembly mechanisms and characterize the physicochemical properties of these self-assembly systems are highlighted. In addition, discussions about their potential applications in biomedical sciences and renewable energy are also included. This review aims to highlight essential features of sequence-defined synthetic polymers (e.g., high stability and protein-like high-information content) and how these unique features enable the construction of robust biomimetic functional materials with high programmability and predictability, with an emphasis on peptoids and their self-assembled nanomaterials.

From Folding to Assembly: Functional Supramolecular Architectures of Peptides Comprised of Non-Canonical Amino Acids

The engineering of biological molecules is the fundamental concept behind the design of complex materials with desirable functions. Over the last few decades, peptides and proteins have emerged as useful building blocks for well-defined nanostructures with controlled size and dimensions. Short peptides in particular have received much attention due to their inherent biocompatibility, lower synthetic cost, and ease of tunability. In addition to the diverse self-assembling properties of short peptides comprising coded amino acids and their emerging applications in nanotechnology, there is now growing interest in the properties of peptides composed of non-canonical amino acids. Such non-natural oligomers have been shown in recent years to form well-defined secondary structures similar to natural proteins, with the ability to self-assemble to generate a wide variety of nanostructures with excellent biostability. This review describes recent events in the development of supramolecular assemblies of peptides composed completely of non-coded amino acids and their hybrid analogues. Special attention is paid to understanding the supramolecular assemblies at the atomic level and to considering their potential applications in nanotechnology.

Amino Acid and Peptide-Based Liquid Crystals: An Overview

The role of amino acids and peptides has found remarkable usage in both living systems and nonliving materials, which have enabled its utility by virtue of crafting molecular architectures through covalent bonds and non-covalent interactions. In material chemistry, the role of peptides in Liquid Crystals (LCs) is profound, especially in the rapid construction of supramolecular hierarchical networks. The importance of LCs for a variety of societal needs leads to the synthesis of innumerable LCs by conventional mesogenic strategy and nonconventional molecular design principles. For example, electronic appliances, including flat panel TV displays, electronic notebooks, digital cameras, domestic devices, use LCs as an integral component for such applications. In addition, LCs are useful in biological systems, including stem cell research, sensors for bacteria, virus, and proteins. These accomplishments are possible mostly due to the non-conventional molecular design principles for crafting LCs using smaller molecular motifs. The usage of amino acids and peptides in LCs facilitates many intrinsic characteristics, including side-chain diversity, chirality, directionality, reversibility, electro-optical, columnar axis, stimuli-responsive complex molecular architectures. The next essential criteria for any LCs design for useful applications are room temperature LC (RT-LC); therefore, the quest for such LCs system remains highly significant. Evidently, there are around half a million liquid crystalline molecules; only a handful of RTLCs has been found, as there is no simple, precise strategy or molecular design principles to obtain RT-LC systems. The smaller molecular motifs of amino acids and linear peptides as a structural part of mesogenic molecules led to many LC phases with properties, including lyotropic, thermotropic, and its applications in different realms. Therefore, this review serves as a compilation of Small Peptide-based LCs (SPLCs) exhibiting lyotropic and thermotropic phases with applications in the recent advancements.

A protet-based, protonic charge transfer model of energy coupling in oxidative and photosynthetic phosphorylation

Textbooks of biochemistry will explain that the otherwise endergonic reactions of ATP synthesis can be driven by the exergonic reactions of respiratory electron transport, and that these two half-reactions are catalyzed by protein complexes embedded in the same, closed membrane. These views are correct. The textbooks also state that, according to the chemiosmotic coupling hypothesis, a (or the) kinetically and thermodynamically competent intermediate linking the two half-reactions is the electrochemical difference of protons that is in equilibrium with that between the two bulk phases that the coupling membrane serves to separate. This gradient consists of a membrane potential term Δψ and a pH gradient term ΔpH, and is known colloquially as the protonmotive force or pmf. Artificial imposition of a pmf can drive phosphorylation, but only if the pmf exceeds some 150-170mV; to achieve in vivo rates the imposed pmf must reach 200mV. The key question then is 'does the pmf generated by electron transport exceed 200mV, or even 170mV?' The possibly surprising answer, from a great many kinds of experiment and sources of evidence, including direct measurements with microelectrodes, indicates it that it does not. Observable pH changes driven by electron transport are real, and they control various processes; however, compensating ion movements restrict the Δψ component to low values. A protet-based model, that I outline here, can account for all the necessary observations, including all of those inconsistent with chemiosmotic coupling, and provides for a variety of testable hypotheses by which it might be refined.

Hierarchical approach for the rational construction of helix-containing nanofibrils using α,β-peptides

The rational design of novel self-assembled nanomaterials based on peptides remains a great challenge in modern chemistry. A hierarchical approach for the construction of nanofibrils based on α,β-peptide foldamers is proposed. The incorporation of a helix-promoting trans-(1S,2S)-2-aminocyclopentanecarboxylic acid residue in the outer positions of the model coiled-coil peptide led to its increased conformational stability, which was established consistently by the results of CD, NMR and FT-IR spectroscopy. The designed oligomerization state in the solution of the studied peptides was confirmed using analytical ultracentrifugation. Moreover, the cyclopentane side chain allowed additional interactions between coiled-coil-like structures to direct the self-assembly process towards the formation of well-defined nanofibrils, as observed using AFM and TEM techniques.

A Lyotropic Liquid Crystal from a Flexible Oligopeptide Amphiphile in Dimethyl Sulfoxide

Despite the rapid progress in peptide liquid crystals (LCs) due to their prominent properties, our investigation on flexible peptide-based LCs is incomplete, mainly resulted from their unclear formation mechanisms and unexploited applications in organic solvents. Here, we develop a lyotropic LC based on a flexible oligopeptide amphiphile, which aggregates into aligned cylinder-like nanostructures in dimethyl sulfoxide (DMSO). The formation mechanism of lyotropic LC in DMSO was probed by the experimental investigation and molecular dynamics simulation, indicating that the hydrogen bonding and hydrophobic and electrostatic interactions contribute to the formation of ordered nanostructures in the organic solvent. Arising from the orientational order and suitable fluidity, we exploit the application of lyotropic LC as an aligned medium to measure the residual dipolar couplings of bioactive molecules. This study not only offers the understanding of the mechanism to create LC systems without rigid aromatic groups but also expands the applications of ordered bottom-up nanomaterials in organic solvents.

The Diverse World of Foldamers: Endless Possibilities of Self-Assembly

Different classes of foldamers, which are synthetic oligomers that adopt well-defined conformations in solution, have been the subject of extensive studies devoted to the elucidation of the forces driving their secondary structures and their potential as bioactive molecules. Regardless of the backbone type (peptidic or abiotic), the most important features of foldamers are the high stability, easy predictability and tunability of their folding, as well as the possibility to endow them with enhanced biological functions, with respect to their natural counterparts, by the correct choice of monomers. Foldamers have also recently started playing a starring role in the self-assembly of higher-order structures. In this review, selected articles will be analyzed to show the striking number of self-assemblies obtained for foldamers with different backbones, which will be analyzed in order of increasing complexity. Starting from the simplest self-associations in solution (e.g., dimers of β-strands or helices, bundles, interpenetrating double and multiple helices), the formation of monolayers, vesicles, fibers, and eventually nanostructured solid tridimensional morphologies will be subsequently described. The experimental techniques used in the structural investigation, and in the determination of the driving forces and mechanisms underlying the self-assemblies, will be systematically reported. Where applicable, examples of biomimetic self-assembled foldamers and their interactions with biological components will be described.

Novel Materials From the Supramolecular Self-Assembly of Short Helical β3-Peptide Foldamers

Self-assembly is the spontaneous organization of small components into higher-order structures facilitated by the collective balance of non-covalent interactions. Peptide-based self-assembly systems exploit the ability of peptides to adopt distinct secondary structures and have been used to produce a range of well-defined nanostructures, such as nanotubes, nanofibres, nanoribbons, nanospheres, nanotapes, and nanorods. While most of these systems involve self-assembly of α-peptides, more recently β-peptides have also been reported to undergo supramolecular self-assembly, and have been used to produce materials-such as hydrogels-that are tailored for applications in tissue engineering, cell culture and drug delivery. This review provides an overview of self-assembled peptide nanostructures obtained via the supramolecular self-assembly of short β-peptide foldamers with a specific focus on N-acetyl-β3-peptides and their applications as bio- and nanomaterials.

Fabrication of cationic nanostructures from short self-assembling amphiphilic mixed α/β-pentapeptide: Potential candidates for drug delivery, gene delivery, and antimicrobial applications

The present article describes designing and fabrication of nanostructures from a mixed α/β-pentapeptide, Lys-βAla-βAla-Lys-βAla, which majorly contains non-natural β-alanine residues in the backbone with two α-lysine residues at 1- and 4-positions. The amphiphilic pentapeptide showed the ability to self-assemble into cationic nanovesicles in an aqueous solution. The average size of peptide nanostructures was found to be ~270 nm with a very high cationic charge of ~+40 mV. TEM micrographs revealed the average size of the same nanostructures ~80 nm bearing vesicular morphology. CD and FTIR spectroscopic studies on self-assembled pentapeptide hinted at random coil conformation which was also correlated with conformational search program using Hyper Chem 8.0. The pentapeptide nanostructures were then tested for encapsulation of hydrophobic model drug moieties, L-Dopa, and curcumin. Transfection efficiency of the generated cationic nanostructures was evaluated on HEK293 cells and compared the results with those obtained in the presence of chloroquine. The cytotoxicity assay performed using MTT depicted ~75-80% cell viability. The obtained nanostructures also gave positive results against both Gram-negative and Gram-positive bacterial strains. Altogether the results advocate the promising potential of the pentapeptide foldamer, H-Lys-βAla-βAla-Lys-βAla-OEt, for drug and gene delivery applications along with the antimicrobial activity.

[Synthesis, Aggregation, Self-assembly, and Dynamic Properties of Helicene Oligomers]

 Biological systems exhibit dynamic phenomena at the macroscopic level as a result of the hierarchical integration of phenomena at the molecular level. For example, a number of amino acids compose actin proteins, which form three-dimensional structures determined by the sequence of amino acids. They form fibers by self-assembly, which then form ordered structures such as meshes, lyotropic liquid crystals (LCs), and bundles. The dynamic and reversible polymorphism between these nano- to centimeter-sized ordered structures is essential for biological functions such as cell division, contraction, and locomotion. To understand biological systems and create new functional materials, it is essential to develop a methodology to integrate phenomena at the molecular level into those at the macroscopic level using synthetic molecules. In this research, synthetic oligomers containing helicenes, which exhibit reversible structural transitions between cylindrical double helices and random coils in response to thermal stimuli, were employed as building blocks for the development of such a methodology. The properties of homo- and hetero-double helices at the molecular level were first controlled by taking advantage of the diversity of their molecular structures. Then, nano- to micrometer-sized structures were constructed by the self-assembly of hetero-double helices, which include fibers/gels, vesicles, and lyotropic LCs, and their dynamic properties were controlled by molecular design.

Extremophilic proteases as novel and efficient tools in short peptide synthesis

The objective of this review is to outline the crucial role that peptides play in various sectors, including medicine. Different ways of producing these compounds are discussed with an emphasis on the benefits offered by industrial enzyme biotechnology. This paper describes mechanisms of peptide bond formation using a range of proteases with different active site structures. Importantly, these enzymes may be further improved chemically and/or genetically to make them better suited for their various applications and process conditions. The focus is on extremophilic proteases, whose potential does not seem to have been fully appreciated to date. The structure of these proteins is somewhat different from that of the common commercially available enzymes, making them effective at high salinity and high or low temperatures, which are often favorable to peptide synthesis. Examples of such enzymes include halophilic, thermophilic, and psychrophilic proteases; this paper also mentions some promising catalytic proteins which require further study in this respect.

Unique Functional Materials Derived from β-Amino Acid Oligomers

The unique structures formed by β-amino acid oligomers, or β-peptide foldamers, have been studied for almost two decades, which has led to the discovery of several distinctive structures and bioactive molecules. Recently, this area of research has expanded from conventional peptide drug design to the formation of assemblies and nanomaterials by peptide self-assembly. The unique structures formed by β-peptides give rise to a set of new materials with altered properties that differ from conventional peptide-based materials; such new materials may be useful in several bio- and nanomaterial applications.

Hexagonal Lyotropic Liquid Crystal from Simple "Abiotic" Foldamers

The motivation of foldamer chemistry is to identify novel building blocks that have the potential to imitate natural species. Peptides and peptide mimetics can form stable helical conformations and further self-assemble into diverse aggregates in water, where it is difficult to isolate a single helix. In contrast, most "abiotic" foldamers may fold into helical structures in solution, but are difficult to assemble into tertiary ones. It remains a challenge to obtain "abiotic" species similar to peptides. In this paper, a novel foldamer scaffold, in which p-phenyleneethynylene units are linked by chiral carbon atoms, was designed and prepared. In very dilute solutions, these oligomers were random coils. The hexamer and octamers could form a hexagonal lyotropic liquid crystal (LC) in CH2Cl2 when the concentrations reached the critical values. The microscopic observations indicated that they could assemble into the nanofibers in the LC. Interestingly, after some LC phases were diluted at room temperature, the nanofibers could be preserved. The good stabilities of the assemblies are possibly attributed to a more compact backbone and more rigid side chains.

Interaction of the Hydrophobic Tip of an Atomic Force Microscope with Oligopeptides Immobilized Using Short and Long Tethers

We report an investigation of the adhesive force generated between the hydrophobic tip of an atomic force microscope (AFM) and surfaces presenting oligopeptides immobilized using either short (∼1 nm) or long (∼60 nm) tethers. Specifically, we used either sulfosuccinimidyl-4-(N-maleimidomethyl)cyclohexane-1-carboxylate (SSMCC) or 10 kDa polyethylene glycol (PEG) end-functionalized with maleimide and N-hydroxysuccinimide groups to immobilize helical oligomers of β-amino acids (β-peptides) to mixed monolayers presenting tetraethylene glycol (EG4) and amine-terminated EG4 (EG4N) groups. When SSMCC was used to immobilize the β-peptides, we measured the adhesive interaction between the AFM tip and surface to rupture through a single event with magnitude consistent with the interaction of a single β-peptide with the AFM tip. Surprisingly, this occurred even when, on average, multiple β-peptides were located within the interaction area between the AFM tip and surface. In contrast, when using the long 10 kDa PEG tether, we observed the magnitude of the adhesive interaction as well as the dynamics of the rupture events to unmask the presence of the multiple β-peptides within the interaction area. To provide insight into these observations, we formulated a simple mechanical model of the interaction of the AFM tip with the immobilized β-peptides and used the model to demonstrate that adhesion measurements performed using short tethers (but not long tethers) are dominated by the interaction of single β-peptides because (i) the mechanical properties of the short tether are highly nonlinear, thus causing one β-peptide to dominate the adhesion force at the point of rupture, and (ii) the AFM cantilever is mechanically unstable following the rupture of the adhesive interaction with a single β-peptide. Overall, our study reveals that short tethers offer the basis of an approach that facilitates measurement of adhesive interactions with single molecules presented at surfaces.

Decorated self-assembling β3-tripeptide foldamers form cell adhesive scaffolds

β-Peptide foldamers were functionalised with the cell recognition motifs RGD or IKVAV, self-assembled into fibres, and co-assembled with non-functionalised β-peptides to yield tunable bioscaffolds with cell adhering properties.

Exploring structural features of folded peptide architectures in the construction of nanomaterials

Supramolecular assemblies of conformationally biased α,γ-hybrid peptides composed of alternating α-Phe and 4,4-dimethyl substituted γ-amino acids are investigated.

Formation of functional super-helical assemblies by constrained single heptad repeat

Inspired by the key role of super-helical motifs in molecular self-organization, several tandem heptad repeat peptides were used as building blocks to form well-ordered supramolecular nano-assemblies. However, the need for stable helical structures limits the length of the smallest described units to three heptad repeats. Here we describe the first-ever self-assembling single heptad repeat module, based on the ability of the non-coded α-aminoisobutyric acid to stabilize very short peptides in helical conformation. A conformationally constrained peptide comprised of aromatic, but not aliphatic, residues, at the first and fourth positions formed helical fibrillar assemblies. Single crystal X-ray analysis of the peptide demonstrates super-helical packing in which phenylalanine residues formed an ‘aromatic zipper' arrangement at the molecular interface. The modification of the minimal building block with positively charged residues results in tight DNA binding ascribed to the combined factors of helicity, hydrophobicity and charge. The design of these peptides defines a new direction for assembly of super-helical nanostructures by minimal molecular elements.

Advances in bionanotechnology demand an increased portfolio of assemblies beyond those currently available. Here, the authors design a crystallographically characterized super-helical sequence composed of single heptad repeats which, through derivatisation, offers vast potential applications.

Synthesis of Hydrophobic Carbohydrate Polymers and Their Formation of Thermotropic Liquid Crystalline Phases

The first synthesis of enantiopure glucose octyl ether polyamido-saccharides (GOE-PAS) with a defined molecular weight and narrow dispersity is reported using a controlled anionic ring-opening polymerization of a glucose-derived β-lactam sugar monomer possessing octyl ether chains. This new polymer structure is characterized by NMR, infrared (IR), optical rotation, gel permeation chromatography (GPC), and thermogravimetric analysis (TGA). At room temperature, the polymers form lamellar (Lam) phases. Upon heating to mild temperatures (ca. 60 °C), the shortest polymer shows a direct transition to the isotropic (Iso) liquid state, while the longer polymers give rise to a hexagonal columnar (Col_h) phase before becoming isotropic at higher temperatures (ca. 120 °C).

Exploiting aromatic interactions for β-peptide foldamer helix stabilization: a significant design element

Tetrameric H10/12 helix stabilization was achieved by the application of aromatic side-chains in β-peptide oligomers by intramolecular backbone-side chain CH-π interactions. Because of the enlarged hydrophobic surface of the oligomers, a further aim was the investigation of the self-assembly in a polar medium for the β-peptide H10/12 helices. NMR, ECD, and molecular modeling results indicated that the oligomers formed by cis-[1S,2S]- or cis-[1R,2R]-1-amino-1,2,3,4-tetrahydronaphthalene-2-carboxylic acid (ATENAC) and cis-[1R,2S]- or cis-[1S,2R]-2-aminocyclohex-3-enecarboxylic acid (ACHEC) residues promote stable H10/12 helix formation with an alternating backbone configuration even at the tetrameric chain length. These results support the view that aromatic side-chains can be applied for helical structure stabilization. Importantly, this is the first observation of a stable H10/12 helix with tetrameric chain-length. The hydrophobically driven self-assembly was achieved for the helix-forming oligomers, seen as vesicles in transmission electron microscopy images. The self-association phenomenon, which supports the helical secondary structure of these oligomers, depends on the hydrophobic surface area, because a higher number of aromatic side-chains yielded larger vesicles. These results serve as an essential element for the design of helices relating to the H10/12 helix. Moreover, they open up a novel area for bioactive foldamer construction, while the hydrophobic area gained through the aromatic side-chains may yield important receptor-ligand interaction surfaces, which can provide amplified binding strength.

Self-association of an enantiopure β-pentapeptide in nematic liquid crystals

Herein, we report for the first time that nematic liquid-crystalline environments drive the reversible self-aggregation of an enantiopure β-pentapeptide into oligomers with a well-defined structure. The peptide contains four (1S,2S)-2-aminocyclopentane carboxylic acid (ACPC) residues and the paramagnetic β-amino acid (3R,4R)-4-amino-1-oxyl-2,2,5,5-tetramethylpyrrolidine-3-carboxylic acid (POAC). The structure of the oligomers was investigated by electron paramagnetic resonance (EPR) spectroscopy, which allowed us to obtain the intermonomer distance distribution in the aggregates as a function of peptide concentration in two nematic liquid crystals, E7 and ZLI-4792. The aggregates were modeled on the basis of the EPR data, and their orientation and order in the nematic phase were studied by the surface tensor method.

Metallo-foldamers with backbone-coordinative oxime peptides: control of secondary structures

Metal-mediated secondary structures of peptide-based foldamers were constructed using artificial backbone-coordinative oxime peptides. Complexation of the peptides with Pd(II) afforded several mononuclear and dinuclear secondary structures such as helices and hairpins as confirmed by single-crystal XRD and NMR analyses.

Liquid Crystalline Materials for Biological Applications

Liquid crystals have a long history of use as materials that respond to external stimuli (e.g., electrical and optical fields). More recently, a series of investigations have reported the design of liquid crystalline materials that undergo ordering transitions in response to a range of biological interactions, including interactions involving proteins, nucleic acids, viruses, bacteria and mammalian cells. A central challenge underlying the design of liquid crystalline materials for such applications is the tailoring of the interface of the materials so as to couple targeted biological interactions to ordering transitions. This review describes recent progress toward design of interfaces of liquid crystalline materials that are suitable for biological applications. Approaches addressed in this review include the use of lipid assemblies, polymeric membranes containing oligopeptides, cationic surfactant-DNA complexes, peptide-amphiphiles, interfacial protein assemblies and multi-layer polymeric films.