A New Class of Electrocatalysts for Hydrogen Production from Water Electrolysis: Metal Monolayers Supported on Low-Cost Transition Metal Carbides

Unlocking Efficiency: Minimizing Energy Loss in Electrocatalysts for Water Splitting

Catalysts play a crucial role in water electrolysis by reducing the energy barriers for hydrogen and oxygen evolution reactions (HER and OER). Research aims to enhance the intrinsic activities of potential catalysts through material selection, microstructure design, and various engineering techniques. However, the energy consumption of catalysts has often been overlooked due to the intricate interplay among catalyst microstructure, dimensionality, catalyst-electrolyte-gas dynamics, surface chemistry, electron transport within electrodes, and electron transfer among electrode components. Efficient catalyst development for high-current-density applications is essential to meet the increasing demand for green hydrogen. This involves transforming catalysts with high intrinsic activities into electrodes capable of sustaining high current densities. This review focuses on current improvement strategies of mass exchange, charge transfer, and reducing electrode resistance to decrease energy consumption. It aims to bridge the gap between laboratory-developed, highly efficient catalysts and industrial applications regarding catalyst structural design, surface chemistry, and catalyst-electrode interplay, outlining the development roadmap of hierarchically structured electrode-based water electrolysis for minimizing energy loss in electrocatalysts for water splitting.

In situ synthesis of tentacle-like NiC/Mo2C/NF nanorods array with excellent hydrogen evolution reaction at high current densities

The problem limiting the use of hydrogen evolution reactions in industry is the inability of electrocatalysts to operate stably at high current densities, so the development of stable and efficient electrocatalysts is important for hydrogen production by water splitting. By designing a rational interface engineering not only can the problem of limited number of catalytic sites in the catalyst be solved, but also can facilitate electron transfer, thus enhancing the efficiency of water splitting. Here, we designed a two-stage chemical vapour deposition method to construct NiC/Mo2C nanorod arrays on nickel foam to enhance the electrocatalytic ability of the catalysts, which exhibited efficient HER catalytic activity due to their special tentacle-like nanorod structure and abundant heterogeneous junction surfaces, which brought about abundant active sites as well as promoted electron transfer capability. The resulting catalysts provide current densities of 10, 100 and 500 mA cm-2 with overpotentials of 31, 153 and 264 mV, and exhibit excellent stability at current densities of 10 mA cm-2 for 200 h. This discovery provides a new idea for the rational design of catalysts with special morphologies.

Rare earth oxide based electrocatalysts: synthesis, properties and applications

As an important strategic resource, rare earths (REs) constitute 17 elements in the periodic table, namely 15 lanthanides (Ln) (La-Lu, atomic numbers from 57 to 71), scandium (Sc, atomic number 21) and yttrium (Y, atomic number 39). In the field of catalysis, the localization and incomplete filling of 4f electrons endow REs with unique physical and chemical properties, including rich electronic energy level structures, variable coordination numbers, etc., making them have great potential in electrocatalysis. Among various RE catalytic materials, rare earth oxide (REO)-based electrocatalysts exhibit excellent performances in electrocatalytic reactions due to their simple preparation process and strong structural variability. At the same time, the electronic orbital structure of REs exhibits excellent electron transfer ability, which can reduce the band gap and energy barrier values of rate-determining steps, further accelerating the electron transfer in the electrocatalytic reaction process; however, there is a lack of systematic review of recent advances in REO-based electrocatalysis. This review systematically summarizes the synthesis, properties and applications of REO-based nanocatalysts and discusses their applications in electrocatalysis in detail. It includes the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), hydrogen oxidation reaction (HOR), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), methanol oxidation reaction (MOR), nitrogen reduction reaction (NRR) and other electrocatalytic reactions and further discusses the catalytic mechanism of REs in the above reactions. This review provides a timely and comprehensive summary of the current progress in the application of RE-based nanomaterials in electrocatalytic reactions and provides reasonable prospects for future electrocatalytic applications of REO-based materials.

Molybdenum Phosphide Quantum Dots Encapsulated by P/N-Doped Carbon for Hydrogen Evolution Reaction in Acid and Alkaline Electrolytes

A facile and eco-friendly strategy is presented for synthesizing novel nanocomposites, with MoP quantum dots (QDs) as cores and graphitic carbon as shells, these nanoparticles are dispersed in a nitrogen and phosphorus-doped porous carbon and carbon nanotubes (CNTs) substrates (MoP@NPC/CNT). The synthesis involves self-assembling reactions to form single-source precursors (SSPs), followed by pyrolysis at 900 °C in an inert atmosphere to obtain MoP@NPC/CNT-900. The presence of carbon layers on the MoP QDs effectively prevents particle aggregation, enhancing the utilization of active MoP species. The optimized sample, MoP@NPC/CNT-900, exhibits remarkable electrocatalytic activity and durability for the hydrogen evolution reaction (HER). It demonstrates a low overpotential of 155 mV at 10 mA cm-2 , a small Tafel slope of 76 mV dec-1 , and sustained performance over 20 hours in 0.5 M H2 SO4 . Furthermore, the catalyst shows excellent activity in 1 M KOH, with a relatively low overpotential of 131 mV and long-term durability under constant current input. The exceptional HER activity can be attributed to several factors: the superior performance of MoP QDs, the large surface area and good conductivity of the carbon substrates, and the synergistic effect between MoP and carbon species.

Heterointerface engineering of cobalt molybdenum suboxide for overall water splitting

Highly active and earth-abundant electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are of great significance for sustainable hydrogen generation through alkaline water electrolysis. Here, with an aim to enhance the bifunctional electrocatalytic activity of cobalt molybdate towards overall water splitting, we demonstrate a simple method involving the modulation of the cobalt to molybdenum ratio and creation of phase-modulated heterointerfaces. Samples with varying Co/Mo molar ratios are obtained via a microwave-assisted synthesis method using appropriate starting precursors. The synthesis conditions are modified to create a heterointerface involving multiple phases of cobalt molybdenum suboxides (CoO/CoMoO3/Co2Mo3O8) supported on Ni foam (NF). Detailed electrochemical studies reveal that modulating the composition and hence the interface can tweak the bifunctional electrocatalytic activity of the material for HER and OER and thus improve the overall water splitting efficiency with very high durability over 500 h. To further evaluate the practical applicability of the studied catalyst in water splitting, an alkaline electrolyser is fabricated with the optimized cobalt molybdenum suboxide material (CMO-1.25) as a bifunctional electrocatalyst. A current density of 220 mA cm-2 @1.6 V and 670 mA cm-2 @1.8 V was obtained, and the device showed very good long-term durability.

Electrocatalytic study of the hydrogen evolution reaction on MoS2/BP and MoSSe/BP in acidic media

Molecular hydrogen (H2) production by the electrochemical hydrogen evolution reaction (HER) is being actively explored for non-precious metal-based electrocatalysts that are earth-abundant and low cost like MoS2. Although it is acid-stable, its applicability is limited by catalytically inactive basal planes, poor electrical transport and inefficient charge transfer at the interface. Therefore, the present work examines its bilayer van der Waals heterostructure (vdW HTS). The second constituent monolayer boron phosphide (BP) is advantageous as an electrode material owing to its chemical stability in both oxygen and water environments. Here, we have performed first-principles based calculations under the framework of density functional theory (DFT) for the HER in an electrochemical double layer model with the BP monolayer, MoS2/BP and MoSSe/BP vdW HTSs. The climbing image nudged elastic band method (CI-NEB) has been employed to determine the minimum energy pathways for Tafel and Heyrovsky reactions. The calculations reveal that the Tafel reaction shows no reaction barrier. Thereafter, for the Heyrovsky reaction, we obtained a low reaction barrier in the vdW HTSs as compared to that in the BP monolayer. Subsequently, we have observed no significant difference in the reaction profile of MoS2/BP and MoSSe/BP vdW HTSs in the case of 2 × 2 supercell configuration. However, in the case of 3 × 3 and 4 × 4 configurations, MoSSe/BP shows a feasible Heyrovsky reaction with no reaction barrier. The coverages with 1/4H+ concentration (conc.) deduced high coverage with low conc. and low coverage with high conc. to be apt for the HER via the Heyrovsky reaction path. Finally, on observing the activation barrier of the Heyrovsky pathway along with that of second H adsorption at the surface, the Heyrovsky path is expected to be favoured.

Palladium metallene confined on MXene with increased hydroxyl binding strength for highly efficient ethanol electrooxidation

Rational design and synthesis of high-performance electrocatalysts for ethanol oxidation reaction (EOR) is crucial to large-scale commercialization of direct ethanol fuel cells, but it is still an incredible challenge. Herein, a unique Pd metallene/Ti3C2Tx MXene (Pdene/Ti3C2Tx)-supported electrocatalyst is constructed via an in-situ growth approach for high-efficiency EOR. The resulting Pdene/Ti3C2Tx catalyst achieves an ultrahigh mass activity of 7.47 A mgPd-1 under alkaline condition, as well as high tolerance to CO poisoning. In situ attenuated total reflection-infrared spectroscopy studies combined with density functional theory calculations reveal that the excellent EOR activity of Pdene/Ti3C2Tx catalyst is attributed to the unique and stable interfaces which reduce the reaction energy barrier of *CH3CO intermediate oxidation and facilitate oxidative removal of CO poisonous species by increasing the Pd-OH binding strength.

Electrochemical hydrogen evolution on Pt-based catalysts from a theoretical perspective

Hydrogen evolution reaction (HER) by splitting water is a key technology toward a clean energy society, where Pt-based catalysts were long known to have the highest activity under acidic electrochemical conditions but suffer from high cost and poor stability. Here, we overview the current status of Pt-catalyzed HER from a theoretical perspective, focusing on the methodology development of electrochemistry simulation, catalytic mechanism, and catalyst stability. Recent developments in theoretical methods for studying electrochemistry are introduced, elaborating on how they describe solid-liquid interface reactions under electrochemical potentials. The HER mechanism, the reaction kinetics, and the reaction sites on Pt are then summarized, which provides an atomic-level picture of Pt catalyst surface dynamics under reaction conditions. Finally, state-of-the-art experimental solutions to improve catalyst stability are also introduced, which illustrates the significance of fundamental understandings in the new catalyst design.

Modulating Dominant Facets of Pt through Multistep Selective Anchored on WC for Enhanced Hydrogen Evolution Catalysis

Facilitating the exposure of the active crystal facets on the surfaces of composite catalysts is a representative route to promote catalytic activity. Based on a tailored galvanic replacement reaction, herein, a self-assembly route is reported to prepare Pt-WC/CNT with Pt (200) preferential orientation and well-dispersed structure, which are capable of substantially boosting electrocatalysis in hydrogen evolution reaction (HER). Formation mechanism reveals that the (200)-dominated Pt-based catalysts form in galvanic replacement reaction through selective anchored on WC, and the multistep galvanic replacement process plays a critical role to realize the Pt (200)-dominated growth in higher Pt loading catalyst. These unique structural features endow the Pt-WC/CNT with a high turnover frequency of 94.18 H2·s-1 at 100 mV overpotential, 7-fold higher than that of commercial Pt/C (13.55 H2·s-1), ranking it among the most active catalysts. In addition, this method, which combines with gas-solid reaction and galvanic replacement reaction, paves the way to scalable synthesis as Pt facets-controllable composite catalysts to challenge commercial Pt/C.

Tuning the Electronic Structure of Cobalt Selenide on Copper Foam by Introducing a Ni Buffer Layer for Highly Efficient Electrochemical Water Splitting

The development of a cost-effective, remarkably competent, and durable bifunctional electrocatalyst is the foremost requirement of water splitting to generate H₂ fuel as a renewable energy technology. Three-dimensional porous copper foam (Cuf) when electrochemically decorated with transition metal selenide results in a highly active electrocatalyst for adequate water electrolysis. In terms of water splitting, the role of cobalt selenide and Cuf has already proven to be remarkable. The introduction of a Ni buffer layer between Cuf and cobalt selenide (Cuf@Ni-CoSe₂) acts as a valve to enhance the electron thrust from the substrate to the material surface with no compromise in the overall material conductivity, which not only increases the efficiency and activity but also improves the stability of the catalyst. The self-supported synthesized catalyst material showed an admirable activity toward the oxygen evolution reaction and hydrogen evolution reaction in alkaline media. The performance of the catalyst was found to be significantly better than that of the noble catalyst RuO₂. The catalyst was very stable up to 93 h and attained a full cell voltage of only 1.52 V at a current density of 10 mA cm^-2. Therefore, for large-scale hydrogen production, this as-synthesized catalyst hss the potential to replace conventional fossil fuel-based energy systems.

2D/2D Interface Engineering Promotes Charge Separation of Mo2C/g-C3N4 Nanojunction Photocatalysts for Efficient Photocatalytic Hydrogen Evolution

The focus of designing and synthesizing composite catalysts with high photocatalytic efficiency is the regulation of nanostructures and optimization of heterojunctions. By increasing the contact area between the catalysts, additional reaction sites can be established and charge carriers can be transferred and reacted faster. Here, two-dimensional (2D) Mo₂C is prepared via a novel approach by carbonizing precursors intercalated by low-boiling solvents, and a composite catalyst Mo₂C/graphitic carbon nitride (g-C₃N₄) with 2D to 2D structure optimization was synthesized through the self-assembly of 2D Mo₂C and 2D g-C₃N₄. The hydrogen production rate of the photocatalyst at the optimal ratio is 675.27 μmol g^-1 h^-1, which further exceeds 2D g-C₃N₄. It is 5.1 times that of the 7 wt % B/2D Mo₂C/g-C₃N₄ photocatalyst and also 3.5 times that of 0.5 wt % Pt/g-C₃N₄. The enhanced photocatalytic activity is attributed to the fact that Mo₂C as a cocatalyst can rapidly transfer the photogenerated electrons of g-C₃N₄ to the surface of Mo₂C, and the 2D to 2D structure can provide abundant reaction sites for photogenerated electrons to prevent their recombination with holes. This study provides new ideas and techniques for the development of 2D platinum-like cocatalysts and the optimization of nanojunctions.

Which Is Better for Hydrogen Evolution on Metal@MoS2 Heterostructures from a Theoretical Perspective: Single Atom or Monolayer?

Single atom (SA)- and monolayer (ML)-supported catalysts are two main technical routines to increase electrochemical catalytic performance and reduce cost. To date, it is still a debate which one is better for catalysis in experiments as both routines face a puzzling problem of searching for balance between stability and catalytic activity. Here, hydrogen evolution on two-dimensional 2H-MoS₂ with SA- and ML-adsorbed metal atoms (23 kinds in total) is taken as an example to solve this question by first-principles calculations. The thermodynamic stability during synthesis, in vacuum, and in electrochemical reaction conditions is determined to access the stability of MoS₂ loaded with single (M_S@MoS₂) and monolayer metal atoms (M_M@MoS₂). The realistic catalytic surfaces determined by surface Pourbaix diagrams, the free energy changes of hydrogen atoms at different coverages, and the exchange current densities are applied to determine hydrogen evolution reaction (HER) activity. The results show that all M_M@MoS₂ are much more stable than the corresponding M_S@MoS₂ as the metal-metal interaction in MLs could make the former structures more stable. In general, M_M@MoS₂ show higher hydrogen evolution activities than those of M_S@MoS₂. In detail, the exchange current densities of MoS₂ loaded by Pd ML and Au ML are 6.208, and 1.109 mA/cm^-2, respectively, which are comparable to Pt(111). Combining with small binding energies, the Pd and Au MLs are the most promising catalysts for hydrogen evolution. The purpose of this work is to highlight the advantages and disadvantages of SA- and ML-supported surfaces as HER catalysts and provide a fundamental standard for studying them.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Pt- and Pd-modified transition metal nitride catalysts for the hydrogen evolution reaction

Hydrogen production via electrochemical splitting of water using renewable electricity represents a promising strategy. Currently, platinum group metals (PGMs) are the best performing hydrogen evolution reaction (HER) catalysts. Thus, the design of non-PGM catalysts or low-loading PGM catalysts is essential for the commercial development of hydrogen generation technologies via electrochemical splitting of water. Here, we employed density functional theory (DFT) calculations to explore Pt and Pd modified transition metal nitrides (TMNs) as low-cost HER catalysts. Our calculations show that Pt/Pd binds strongly with TMs on TMN(111) surfaces, leading to the formation of stable Pt and Pd-monolayer (ML)-TMN(111) structures. Furthermore, our calculated hydrogen binding energy (HBE) demonstrates that Pt/MnN, Pt/TiN, Pt/FeN, Pt/VN, Pt/HfN, Pd/FeN, Pd/TaN, Pd/NbN, Pd/TiN, Pd/HfN, Pd/MnN, Pd/ScN, Pd/VN, and Pd/ZrN are promising candidates for the HER with a low value of limiting potential (U_L) similar to that calculated on Pt(111).

Bifunctional WC-Supported RuO2 Nanoparticles for Robust Water Splitting in Acidic Media

We report the strong catalyst-support interaction in WC-supported RuO₂ nanoparticles (RuO₂ -WC NPs) anchored on carbon nanosheets with low loading of Ru (4.11 wt.%), which significantly promotes the oxygen evolution reaction activity with a η₁₀ of 347 mV and a mass activity of 1430 A g_Ru ^-1 , eight-fold higher than that of commercial RuO₂ (176 A g_Ru ^-1 ). Theoretical calculations demonstrate that the strong catalyst-support interaction between RuO₂ and the WC support could optimize the surrounding electronic structure of Ru sites to reduce the reaction barrier. Considering the likewise excellent catalytic ability for hydrogen production, an acidic overall water splitting (OWS) electrolyzer with a good stability constructed by bifunctional RuO₂ -WC NPs only requires a cell voltage of 1.66 V to afford 10 mA cm^-2 . The unique 0D/2D nanoarchitectures rationally combining a WC support with precious metal oxides provides a promising strategy to tradeoff the high catalytic activity and low cost for acidic OWS applications.

Robust Porous WC-Based Self-Supported Ceramic Electrodes for High Current Density Hydrogen Evolution Reaction

Developing an economical, durable, and efficient electrode that performs well at high current densities and is capable of satisfying large-scale electrochemical hydrogen production is highly demanded. A self-supported electrocatalytic "Pt-like" WC porous electrode with open finger-like holes is produced through industrial processes, and a tightly bonded nitrogen-doped WC/W (WC-N/W) heterostructure is formed in situ on the WC grains. The obtained WC-N/W electrode manifests excellent durability and stability under multi-step current density in the range of 30-1000 mA cm-2 for more than 220 h in both acidic and alkaline media. Although WC is three orders of magnitude cheaper than Pt, the produced electrode demonstrates comparable hydrogen evolution reaction performance to the Pt electrode at high current density. Density functional theory calculations attribute its superior performance to the electrode structure and the modulated electronic structure at the WC-N/W interface.

Engineering transition metal catalysts for large-current-density water splitting

Electrochemical water splitting plays a crucial role in transferring electricity to hydrogen fuel and appropriate electrocatalysts are crucial to satisfy the strict industrial demand. However, the successfully developed non-noble metal catalysts have a small tested range and the current density is usually less than 100 mA cm^-2, which is still far away from the practical application standards. Aiming to provide guidance for the fabrication of more advanced electrocatalysts with a large current density, we herein systematically summarize the recent progress achieved in the field of cost-efficient and large-current-density electrocatalyst design. Beginning by illustrating the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) mechanisms, we elaborate on the concurrent issues of non-noble metal catalysts that are required to be addressed. In view of large-current-density operating conditions, some distinctive features with regard to good electrical conductivity, high intrinsic activity, rich active sites, and porous architecture are also summarized. Next, some representative large-current-density electrocatalysts are classified. Finally, we discuss the challenges associated with large-current-density water electrolysis and future pathways in the hope of guiding the future development of more efficient non-noble-metal catalysts to boost large-scale hydrogen production with less electricity consumption.

Construction of an N-Decorated Carbon-Encapsulated W2C/WP Heterostructure as an Efficient Electrocatalyst for Hydrogen Evolution in Both Alkaline and Acidic Media

Tungsten carbide (W₂C) has emerged as a potential alternative to noble-metal catalysts toward hydrogen evolution reaction (HER) owing to its Pt-like electronic configuration. However, unsatisfactory activity, dilatory electron transfer, and inefficient synthesizing methods, especially for nanoscale particles, have severely hindered its large-scale applications. Herein, a novel heterostructure composed of W₂C and tungsten phosphide (WP) embedded in nitrogen-decorated carbon (W₂C/WP@NC) was constructed as an efficient HER electrocatalyst. The as-prepared W₂C/WP@NC catalyst exhibits remarkable electrocatalytic activity and robust durability toward HER both in acids and bases. More notably, the W₂C/WP@NC catalyst demonstrates low overpotentials of 116.37 and 196.2 mV to afford a current density of 10 mA cm^-2 and reveals slight potential decays of about 6.4 and 7.64% over 12 h continuous operation in bases and acids, respectively. The overall water-splitting performance was further evaluated using the W₂C/WP@NC catalyst as the cathode and commercial RuO₂ as the anode in an electrolyzer, which can realize an overall current density of 10 mA cm^-2 and maintain long durability of more than 12 h with a small cell voltage of 1.723 V. This work opens up new opportunities for exploring cost-efficient electrocatalysts in sustainable energy conversion.

Density functional theory studies of transition metal carbides and nitrides as electrocatalysts

Transition metal carbides and nitrides are interesting non-precious materials that have been shown to replace or reduce the loading of precious metals for catalyzing several important electrochemical reactions. The purpose of this review is to summarize density functional theory (DFT) studies, describe reaction pathways, identify activity and selectivity descriptors, and present a future outlook in designing carbide and nitride catalysts for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), oxygen reduction reaction (ORR), nitrogen reduction reaction (N₂RR), CO₂ reduction reaction (CO₂RR) and alcohol oxidation reactions. This topic is of high interest to scientific communities working in the field of electrocatalysis and this review should provide theoretical guidance for the rational design of improved carbide and nitride electrocatalysts.

System Theoretical Study on the Effect of Variable Nonmetallic Doping on Improving Catalytic Activity of 2D-Ti3C2O2 for Hydrogen Evolution Reaction

2D MXenes have been found to be one of the most promising catalysts for hydrogen evolution reaction (HER) due to their excellent electronic conductivity, hydrophilic nature, porosity and stability. Nonmetallic (NM) element doping is an effective approach to enhance the HER catalytic performance. By using the density functional theory (DFT) method, we researched the effect of nonmetallic doping (different element types, variable doping concentrations) and optimal hydrogen absorption concentration on the surface of NM-Ti₃C₂O₂ for HER catalytic activity and stability. The calculation results show that doping nonmetallic elements can improve their HER catalytic properties; the P element dopants catalyst especially exhibits remarkable HER performance (∆GH = 0.008 eV when the P element doping concentration is 100% and the hydrogen absorption is 75%). The origin mechanism of the regulation of doping on stability and catalytic activity was analyzed by electronic structures. The results of this work proved that by controlling the doping elements and their concentrations we can tune the catalytic activity, which will accelerate the further research of HER catalysts.

Spot the difference: hydrogen adsorption and dissociation on unsupported platinum and platinum-coated transition metal carbides

Hydrogenation reactions are involved in several processes in heterogeneous catalysis. Platinum is the best-known catalyst; however, there are limitations to its practical use. Therefore, it is necessary to explore alternative materials and transition metal carbides (TMCs) have emerged as potential candidates. We explore the possibility of using cheap TMCs as supports for a Pt monolayer, aiming to reduce the amount of the noble metal in the catalyst without a significant loss of its activity towards H₂ dissociation. Hence, analyzing H₂ dissociation from a fundamental point of view is a necessary step towards a further practical catalyst. By means of periodic DFT calculations, we analyze H₂ adsorption and dissociation on Pt/β-Mo₂C and Pt/α-WC surfaces, as a function of hydrogen surface coverage (Θ_H), resembling a more realistic model of a catalyst. H₂ dissociation rates were analyzed as a function of the reaction temperature. The results show that Pt/C-WC and Pt/Mo-Mo₂C have a Pt-like behavior for H₂ dissociation at Θ_H > 1/2 ML. At a particular temperature of 298 K, Pt/C-WC and Pt/Mo-Mo2C have low energy barriers for H₂* → 2H* (0.13 and 0.11 eV, respectively), close to the value of Pt (0.06 eV). For the highest coverage, i.e. Θ_H = 1, Pt/C-WC has a lower activation energy and a higher reaction rate than Pt. Finally, the H₂ dissociation rate is higher in Pt/Mo-Mo₂C than in Pt when increasing the temperature above 298 K. Our results put Pt/C-WC and Pt/Mo-Mo₂C under the spotlight as potential catalysts for H₂ dissociation, with a similar performance to Pt, paving the way for further experimental and/or theoretical studies, addressing the capability of Pt/TMC as practical catalysts in hydrogenation reactions.

Dual-Doping and Synergism toward High-Performance Seawater Electrolysis

Hydrogen (H₂ ) production from direct seawater electrolysis is an economically appealing yet fundamentally and technically challenging approach to harvest clean energy. The current seawater electrolysis technology is significantly hindered by the poor stability and low selectivity of the oxygen evolution reaction (OER) due to the competition with chlorine evolution reaction in practical application. Herein, iron and phosphor dual-doped nickel selenide nanoporous films (Fe,P-NiSe₂ NFs) are rationally designed as bifunctional catalysts for high-efficiency direct seawater electrolysis. The doping of Fe cation increases the selectivity and Faraday efficiency (FE) of the OER. While the doping of P anions improves the electronic conductivity and prevents the dissolution of selenide by forming a passivation layer containing P-O species. The Fe-dopant is identified as the primary active site for the hydrogen evolution reaction, and meanwhile, stimulates the adjacent Ni atoms as active centers for the OER. The experimental analyses and theoretical calculations provide an insightful understanding of the roles of dual-dopants in boosting seawater electrolysis. As a result, a current density of 0.8 A cm^-2 is archived at 1.8 V with high OER selectivity and long-term stability for over 200 h, which surpasses the benchmarking platinum-group-metals-free electrolyzers.

Cu2Se nanowires shelled with NiFe layered double hydroxide nanosheets for overall water-splitting

It is imperative but challenging to develop non-noble metal-based bifunctional electrocatalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Our work reports a core-shell nanostructure that is constructed by the electrodeposition of ultrathin NiFe-LDH nanosheets (NiFe-LDHNS) on Cu₂Se nanowires, which are obtained by selenizing Cu(OH)₂ nanowires in situ grown on Cu foam. The obtained Cu₂Se@NiFe-LDHNS electrocatalyst provides more exposed edges and catalytic active sites, thus exhibiting excellent OER and HER electrocatalytic performance in alkaline electrolytes. This catalyst needs only an overpotential of 197 mV for OER at 50 mA cm^-2 and 195 mV for HER at 10 mA cm^-2. Besides, when employed as a bifunctional catalyst for overall water-splitting, it requires a cell voltage of 1.67 V to reach 10 mA cm^-2 in alkaline media. Furthermore, the corresponding water electrolyzer demonstrates robust durability for at least 40 h. The excellent performance of Cu₂Se@NiFe-LDHNS might be ascribed to the synergistic effect from the ultrathin NiFe-LDHNS, the Cu₂Se nanowires anchored on the Cu foam, and the formed core-shell nanostructure, which offers large surface area, ample active sites, and sufficient channels for gas and electrolyte diffusion. This work provides an efficient strategy for the fabrication of self-supported electrocatalysts for efficient overall water-splitting.

The Deoxygenation of Jatropha Oil to High Quality Fuel via the Synergistic Catalytic Effect of Ni, W2C and WC Species

Tungsten carbide-based materials have good deoxygenation activity in the conversion of biomass. In this paper, catalysts with different nickel–tungsten carbide species were prepared by tuning the reduction temperature and Ni loading, and the effects of these different tungsten carbide species in the conversion of jatropha oil were studied. XRD, XPS, TEM, HRTEM, Raman, H2-TPR, ICP-AES were used to characterize the catalysts. The results suggested that metallic W was gradually carburized to W2C species, and W2C species was further carburized to WC species with the increase in reduction temperature and Ni loading. The obtained 10Ni10W/AC-700 catalyst exhibited outstanding catalytic performance with 99.7% deoxygenation rate and 94.5% C15-18 selectivity, which were attributed to the smallest particle size, the best dispersion, the most exposed active sites, and the synergistic effect of Ni, W2C and WC species.