Discrete complexes immobilized onto click-SBA-15 silica: controllable loadings and the impact of surface coverage on catalysis

The influence of ferrocene anchoring method on the reactivity and stability of SBA-15-based catalysts in the degradation of ciprofloxacin via photo-Fenton process

The study is aimed at evaluation of the impact of ferrocene (Fc) anchoring method on the efficiency of its incorporation on the surface of mesoporous silica SBA-15, as well as the reactivity and stability of these hybrid organic-inorganic materials in degradation of ciprofloxacin (CIP) via photocatalytic, Fenton and photo-Fenton processes. For this purpose, Fc was anchored on SBA-15 supports via three different methods: (i) Schiff base formation, (ii) Friedel-Crafts alkylation, and (iii) click reaction (azide-alkyne cycloaddition). The as-prepared materials were characterized by powder X-ray diffraction, nitrogen physisorption, infrared spectroscopy and inductively coupled plasma optical emission spectrometry, as well as UV-visible and X-ray photoelectron spectroscopies. The highest efficiency of Fc anchoring was obtained when applying the Friedel-Crafts alkylation, while the least effective was the Schiff base formation. As concerns the catalysts activity, all materials exhibited negligible reactivity in the photocatalytic process, but were capable of degrading CIP in the presence of H2O2 (Fenton process). For all materials, the highest efficiency of CIP removal was observed for the photo-Fenton reaction. When expressed as the activity of a single Fc site, the most reactive were Fc species from the catalyst prepared by the click reaction. All materials, irrespectively of the ferrocene anchoring method, were deactivating over the reaction time because of Fc leaching. The highest stability in three subsequent reaction cycles was observed for the catalyst prepared by the azide-alkyne cycloaddition. Thus, the click reaction was found to be the best method for the preparation of Fc-containing catalysts for CIP degradation.

Tunable Latency of Hydrosilylation Catalyst by Ligand Density on Nanoparticle Supports

Functionalizing inorganic particles with organic ligands is a common technique for heterogenizing organometallic catalysts. We describe how coordinating molecular platinum to silica nanoparticles functionalized with a high density of norbornene ligands causes unexpected latency of the catalytic activity in hydrosilylation reactions when compared to an identical reaction in which the norbornene is not tethered (2 % vs 97 % conversion in 1 h). Performing the hydrosilylation at elevated temperature (70 °C) suppresses this activity delay, suggesting the usefulness of this technique towards temperature-triggered catalysis. We demonstrate that this latency is related to ligand density on the particle surface, chemical structure of the norbornene, and silica nanoparticle topology. We also establish the benefit of this latency for triggered curing of silicone elastomers. Overall, our work establishes the non-innocent role of inorganic supports when functionalized with organometallic complexes.

Hydrogel cultures reveal Transient Receptor Potential Vanilloid 4 regulation of myofibroblast activation and proliferation in valvular interstitial cells

As aortic valve stenosis develops, valve tissue becomes stiffer. In response to this change in environmental mechanical stiffness, valvular interstitial cells (VICs) activate into myofibroblasts. We aimed to investigate the role of mechanosensitive calcium channel Transient Receptor Potential Vanilloid type 4 (TRPV4) in stiffness induced myofibroblast activation. We verified TRPV4 functionality in VICs using live calcium imaging during application of small molecule modulators of TRPV4 activity. We designed hydrogel biomaterials that mimic mechanical features of healthy or diseased valve tissue microenvironments, respectively, to investigate the role of TRPV4 in myofibroblast activation and proliferation. Our results show that TRPV4 regulates VIC proliferation in a microenvironment stiffness-independent manner. While there was a trend toward inhibiting myofibroblast activation on soft microenvironments during TRPV4 inhibition, we observed near complete deactivation of myofibroblasts on stiff microenvironments. We further identified Yes-activated protein (YAP) as a downstream target for TRPV4 activity on stiff microenvironments. Mechanosensitive TRPV4 channels regulate VIC myofibroblast activation, whereas proliferation regulation is independent of the microenvironmental stiffness. Collectively, the data suggests differential regulation of stiffness-induced proliferation and myofibroblast activation. Our data further suggest a regulatory role for TRPV4 regarding YAP nuclear localization. TRPV4 is an important regulator for VIC myofibroblast activation, which is linked to the initiation of valve fibrosis. Although more validation studies are necessary, we suggest TRPV4 as a promising pharmaceutical target to slow aortic valve stenosis progression.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Molecular Bottom-Up Approaches for the Synthesis of Inorganic and Hybrid Nanostructures

Chemical routes for the synthesis of nanostructures are fundamental in nanoscience. Among the different strategies for the production of nanostructures, this article reviews the fundamentals of the bottom-up approaches, focusing on wet chemistry synthesis. It offers a general view on the synthesis of different inorganic and hybrid organic–inorganic nanostructures such as ceramics, metal, and semiconductor nanoparticles, mesoporous structures, and metal–organic frameworks. This review article is especially written for a wide audience demanding a text focused on the basic concepts and ideas of the synthesis of inorganic and hybrid nanostructures. It is styled for both early researchers who are starting to work on this topic and also non-specialist readers with a basic background on chemistry. Updated references and texts that provide a deeper discussion and describing the different synthesis strategies in detail are given, as well as a section on the current perspectives and possible future evolution.

Advanced Materials for Energy-Water Systems: The Central Role of Water/Solid Interfaces in Adsorption, Reactivity, and Transport

The structure, chemistry, and charge of interfaces between materials and aqueous fluids play a central role in determining properties and performance of numerous water systems. Sensors, membranes, sorbents, and heterogeneous catalysts almost uniformly rely on specific interactions between their surfaces and components dissolved or suspended in the water-and often the water molecules themselves-to detect and mitigate contaminants. Deleterious processes in these systems such as fouling, scaling (inorganic deposits), and corrosion are also governed by interfacial phenomena. Despite the importance of these interfaces, much remains to be learned about their multiscale interactions. Developing a deeper understanding of the molecular- and mesoscale phenomena at water/solid interfaces will be essential to driving innovation to address grand challenges in supplying sufficient fit-for-purpose water in the future. In this Review, we examine the current state of knowledge surrounding adsorption, reactivity, and transport in several key classes of water/solid interfaces, drawing on a synergistic combination of theory, simulation, and experiments, and provide an outlook for prioritizing strategic research directions.

Methodology of deconvolution of total solute retention on chemically modified stationary phases to structure specific contributions of bound compounds

The total solute retention by a chemically modified stationary phase (CMSP) has been shown several times to be a potential tool for studying the binding abilities of the bound compound. In this article, we present a methodology for the deconvolution of the total retention into structure-specific contributions. Three complementary silica-based CMSPs were prepared: 1) non-modified silica, 2) silica modified by syn-bis-Tröger's base (a molecular tweezer) and 3) silica modified by anti-bis-Tröger's base (a non-tweezer molecule). These were characterized by elemental analysis and Raman spectroscopy, and used to assemble liquid chromatography (LC) columns. The total retention factors were estimated for electron-deficient nitro- and cyano-derivatives of benzene in both normal and reverse elution modes. The total retention factor was considered to be the sum of structure-specific retention factors, each related to the affinity (the binding constant) of a specific structure (the binding site), and its content in the modified silica, as defined for weak-affinity chromatography (WAC). The obtained structure-specific contributions are in line with the binding studies of ligands in solution. They reveal details of the retention mechanism, suggesting a more suitable attachment of ligands, and expose the shortcomings of evaluations based solely on the total retentions.

Recyclable Transition Metal Catalysis using Bipyridine-Functionalized SBA-15 by Co-condensation of Methallylsilane with TEOS

Well-defined recyclable Pd- and Rh-bipyridyl group-impregnated SBA-15 catalysts were prepared for C-C bond coupling reaction and selective hydrogenation reactions, respectively. These SBA-15 derived ligands for the catalysts were prepared by direct and indirect co-condensation method using bipyridyl-linked methallylsilane. This indirect method, involving methoxysilane generated from methallylsilane shows higher loading efficiency of transition metal catalysts on SBA-15 than the direct use of methallylsilane.

Influence of Site Pairing in Hydrophobic Silica-Supported Sulfonic Acid Bifunctional Catalysts

Imparting hydrophobicity to solid acid catalysts is critical to regulating their performances by allowing the creation of a less polar environment and improved partitioning of the reactants. Here we present different approaches for the preparation of silica-based catalysts comprising sulfonic acid (-SO₃H) sites and hydrophobic decyl (-C₁₀) chains by either simultaneous or sequential postfunctionalization of an azide-functionalized mesoporous silica platform. This set of hybrid bifunctional catalysts is compared in the model esterification of octanol with acetic acid, and the influence of the preparation methods together with the resulting site spatial distribution is discussed. In parallel, we show that pairing the two functional groups affords a maximum synergistic effect compared to more traditional mixed catalysts with random distributions of acid and hydrophobic functions.

Rotaxanation as a sequestering template to preclude incidental metal insertion in complex oligochromophores

Rotaxane as sacrificial template to avoid metal insertion in porphyrinoids during copper catalyzed click reaction.

Synthesis and X-ray characterization of antipyrine-tethered organosilanes and their magnetic nanoparticles: potent anti-oxidants and receptors for Sn(ii) ions

This study focuses on the synthesis and X-ray characterization of antipyrine-tethered organosilanes for their potential applications in the fields of material science, pharmaceuticals and chemosensing.

Efficient CO2 Hydrogenation to Formate with Immobilized Ir-Catalysts Based on Mesoporous Silica Beads

The Nozaki Ir-based CO₂ hydrogenation catalyst was successfully immobilized on post-functionalized silica beads (d=200 μm) through click chemistry. This material hydrogenates CO₂ into formic acid with turnover numbers reaching 2.8×10⁴ in a batch reactor within 24 hours, paving the way towards the design of efficient heterogeneous catalysts for this transformation.

Inter- and Intramolecular Cooperativity Effects in Alkanolamine-Based Acid-Base Heterogeneous Organocatalysts

Intramolecular cooperativity in heterogeneous organocatalysts is investigated using alkanolamine-functionalized silica acid-base catalysts for the aldol condensation reaction of 4-nitrobenzaldehyde and acetone. Two series of catalysts, one with and one without silanol-capping, are synthesized with varied alkyl linker lengths (two to five) connecting secondary amine and terminal hydroxyl functionalities. The reactivity of these catalysts is assessed to determine the relative potential for intermolecular (silane amine-surface silanol) vs intramolecular (amine-hydroxyl within a single silane) cooperativity, the impact of inhibitory surface-silane interactions, and the role of alkyl linker length and flexibility. For the array of catalysts tested, those with longer linker lengths generally give increased catalytic activity, although the turnover frequency trends differ between catalysts with and without surface silanol capping. Catalysts with alkyl-substituted amines lacking a terminal hydroxyl demonstrate an adverse effect of chain length, where the larger alkyl substituent on the amine provides steric hindrance depressing catalytic activity, while giving additional evidence for improved rates afforded by intramolecular cooperativity in the alkanolamine materials. The silanol-capped alkanolamine catalyst with the longest alkyl linker is found to be the most active alkanolamine catalyst due to its hydrophobized surface, which removes hypothesized silanol-alkanolamine inhibitory interactions, with the sufficient length and flexibility of its amine-hydroxyl linker allowing for favorable conformations for cooperativity. This study demonstrates the feasibility of and important factors affecting intramolecular cooperative activity in acid-base heterogeneous organocatalysis.

Carbene Transfer Reactions Catalysed by Dyes of the Metalloporphyrin Group

Carbene transfer reactions are very important transformations in organic synthesis, allowing the generation of structurally challenging products by catalysed cyclopropanation, cyclopropenation, carbene C-H, N-H, O-H, S-H, and Si-H insertion, and olefination of carbonyl compounds. In particular, chiral and achiral metalloporphyrins have been successfully explored as biomimetic catalysts for these carbene transfer reactions under both homogeneous and heterogeneous conditions. In this work the use of synthetic metalloporphyrins (MPorph, M = Fe, Ru, Os, Co, Rh, Ir, Sn) as homogeneous or heterogeneous catalysts for carbene transfer reactions in the last years is reviewed, almost exclusively focused on the literature since the year 2010, except when reference to older publications was deemed to be crucial.

The first report of the synthesis of organo-functionalized triethoxysilanes via a Knoevenagel condensation approach

The present work involves the design of a new synthetic pathway for the preparation of organo-functionalized triethoxysilanes (OTES) via Knoevenagel condensation.

Porphyrinoid rotaxanes: building a mechanical picket fence

Building on recent progress in the synthesis of functional porphyrins for a range of applications using the Cu-mediated azide-alkyne cycloaddition (CuAAC) reaction, we describe the active template CuAAC synthesis of interlocked triazole functionalised porphyrinoids in excellent yield. By synthesising interlocked analogues of previously studied porphyrin-corrole conjugates, we demonstrate that this approach gives access to rotaxanes in which the detailed electronic properties of the axle component are unchanged but whose steric properties are transformed by the mechanical "picket fence" provided by the threaded rings. Our results suggest that interlocked functionalised porphyrins, readily available using the AT-CuAAC approach, are sterically hindered scaffolds for the development of new catalysts and materials.

Immobilization of a Boron Center-Functionalized Scorpionate Ligand on Mesoporous Silica Supports for Heterogeneous Tp-Based Catalysts

To develop novel immobilized metallocomplex catalysts, allyltris(3-trifluoromethylpyrazol-1-yl)borate (allyl-Tp^CF3) was synthesized. A boron-attached allyl group reacts with thiol to afford the desired mesoporous silica-immobilized Tp^CF3. Cobalt(II) is an efficient probe for estimating the structures of the immobilized metallocomplexes. The structures of the formed cobalt(II) complexes and their catalytic activity depended on the density of the organic thiol groups and on the state of the remaining sulfur donors on the supports.

A novel "tunnel-like" cyclopalladated arylimine catalyst immobilized on graphene oxide nano-sheet

A novel "tunnel-like" cyclopalladated arylimine was prepared and immobilized on graphene oxide nano-sheet to form a hybrid catalytic material (denoted as F-GO-Pd) by self-assembly. The F-GO-Pd catalyst was characterized by XRD, FTIR, Raman, XPS, SEM, and TEM. This novel hybrid catalytic material was proven to be an efficient catalyst for the Suzuki-Miyaura coupling reaction of aryl halides (I, Br, Cl) with arylboronic acids in aqueous media under mild conditions with a very low amount of catalyst (0.01 mol%) and a high turnover frequency (TOF) (>20 000 h^-1). In particular, high yields also could be obtained at room temperature with prolonged time. F-GO-Pd also showed good stability and recyclability seven times with a superior catalytic activity. The heterogeneous catalytic mechanism was investigated with kinetic studies, hot filtration tests, catalyst poisoning tests, and in situ FTIR spectroscopy with a ReactIR and the deactivation mechanism of the catalysts was proposed through analysis of its chemical stability by TEM, SEM, Raman, and XRD, indicating that a heterogeneous catalytic process occurred on the surface and the changes of the catalytic activity during the recycling were related to the micro-environment of the catalyst surface.

Fe-Porphyrin functionalized microporous organic nanotube networks and their application for the catalytic olefination of aldehydes and carbene insertion into N–H bonds

Fe-Porphyrin functionalized microporous organic nanotubes networks were synthesized by an in situ hyper-crosslinking reaction between bottlebrush copolymers and meso-tetraphenylporphyrin iron(iii) chloride.

A heterogenized chiral imino indanol complex of manganese as an efficient catalyst for aerobic epoxidation of olefins

A new composite was synthesized by grafting the (1R,2S)-1-(N-salicylideneamino)-2-indanol complex of Mn onto graphene oxide/Fe₃O₄@C. It catalysed the aerobic epoxidation of olefins with a selectivity of >98% and enantioselectivity of >99%.

Synthesis and Functionalization of Porphyrins through Organometallic Methodologies

This review focuses on the postfunctionalization of porphyrins and related compounds through catalytic and stoichiometric organometallic methodologies. The employment of organometallic reactions has become common in porphyrin synthesis. Palladium-catalyzed cross-coupling reactions are now standard techniques for constructing carbon-carbon bonds in porphyrin synthesis. In addition, iridium- or palladium-catalyzed direct C-H functionalization of porphyrins is emerging as an efficient way to install various substituents onto porphyrins. Furthermore, the copper-mediated Huisgen cycloaddition reaction has become a frequent strategy to incorporate porphyrin units into functional molecules. The use of these organometallic techniques, along with the traditional porphyrin synthesis, now allows chemists to construct a wide range of highly elaborated and complex porphyrin architectures.

Bis-clickable Mesoporous Silica Nanoparticles: Straightforward Preparation of Light-Actuated Nanomachines for Controlled Drug Delivery with Active Targeting

Bis(clickable) mesoporous silica nanospheres (ca. 100 nm) were obtained by the co-condensation of TEOS with variable amounts (2-5 % each) of two clickable organosilanes in the presence of CTAB. Such nanoparticles could be easily functionalized with two independent functions using the copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction to transform them into nanomachines bearing cancer cell targeting ligands with the ability to deliver drugs on-demand. The active targeting was made possible after anchoring folic acid by CuAAC click reaction, whereas the controlled delivery was performed by clicked azobenzene fragments. Indeed, the azobenzene groups are able to obstruct the pores of the nanoparticles in the dark whereas upon irradiation in the UV or in the blue range, their trans-to-cis photoisomerization provokes disorder in the pores, enabling the delivery of the cargo molecules. The on-command delivery was proven in solution by dye release experiments, and in vitro by doxorubicin delivery. The added value of the folic acid ligand was clearly evidenced by the difference of cell killing induced by doxorubicin-loaded nanoparticles under blue irradiation, depending on whether the particles featured the clicked folic acid ligand or not.

One “Click” to controlled bifunctional supported catalysts for the Cu/TEMPO-catalyzed aerobic oxidation of alcohols

A modular strategy is described for the preparation and molecular engineering of multifunctional surfaces using CuAAC chemistry and is applied to the model Cu/TEMPO-catalyzed aerobic oxidation of benzyl alcohol.

Advances in click chemistry for silica-based material construction

Click chemistry is undoubtedly the most powerful 1,3-dipolar cycloaddition reaction in organic synthesis.

A one-step co-condensation method for the synthesis of well-defined functionalized mesoporous SBA-15 using trimethallylsilanes as organosilane sources

Well-defined functionalized mesoporous SBA-15s are synthesized by a one-step co-condensation method using functional group-impregnated trimethallylsilanes.

Design and fabrication of mesoporous heterogeneous basic catalysts

Recent advances in mesoporous solid bases were reviewed, and fundamental principles of how to fabricate efficient basic catalysts were highlighted.

Tailoring the hydrophilic/lipophilic balance of clickable mesoporous organosilicas by the copper-catalyzed azide-alkyne cycloaddition click-functionalization

We have designed and synthesized a clickable bridged silsesquioxane material featuring pendant alkyne chains as an aggregate of golf-ball-like nanoparticles, as evidenced by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and small- and wide-angle X-ray scattering (SWAXS). Using the copper-catalyzed azide-alkyne cycloaddition reaction with a range of organic azides of variable characteristics, we transformed this parent bridged silsesquioxane into new materials with tunable hydrophilic/lipophilic balance in high conversions while preserving the original morphology. N2, cyclohexane, and water sorption experiments were used to quantify the affinity of these materials toward the sorbates through the determination of their Henry's constants. This resulted in the following hydrophilic scale: M-OH > M-PEG > M-C6 > M-Ph > M-F > M-C16, which was mostly confirmed by SWAXS measurements.

A general method for preparing bridged organosilanes with pendant functional groups and functional mesoporous organosilicas

New organosilica precursors containing two triethoxysilyl groups suitable for the organosilica material formation through the sol-gel process were designed and synthesised. These precursors display alkyne or azide groups for attaching targeted functional groups by copper-catalysed azide-alkyne cycloaddition (CuAAC) and can be used for the preparation of functional organosilicas following two strategies: 1) the functional group is first appended by CuAAC under anhydrous conditions, then the functional material is prepared by the sol-gel process; 2) the precursor is first subjected to the sol-gel process, producing porous, clickable bridged silsesquioxanes or periodic mesoporous organosilicas (PMOs), then the desired functional groups are attached by means of CuAAC. Herein, we show the feasibility of both approaches. A series of bridged bis(triethoxysilane)s with different pending organic moieties was prepared, demonstrating the compatibility of the first approach with many functional groups. In particular, we demonstrate that organic functional molecules bearing only one derivatisation site can be used to produce bridged organosilanes and bridged silsesquioxanes. In the second approach, clickable PMOs and porous bridged silsesquioxanes were prepared from the alkyne- or azide-containing precursors, and thereafter, functionalised with complementary model azide- or alkyne-containing molecules. These results confirmed the potential of this approach as a general methodology for preparing functional organosilicas with high loadings of functional groups. Both approaches give rise to a wide range of new functional organosilica materials.