Supramolecularly Engineered Perylene Bisimide Assemblies Exhibiting Thermal Transition from Columnar to Multilamellar Structures

Commercializable Naphthalene Diimide Anolytes for Neutral Aqueous Organic Redox Flow Batteries

Neutral aqueous organic redox flow batteries (AORFBs) hold the potential to facilitate the transition of renewable energy sources from auxiliary to primary energy, the commercial production of anolyte materials still suffers from insufficient performance of high-concentration and the high cost of the preparation problem. To overcome these challenges, this study provides a hydrothermal synthesis methodology and introduces the charged functional groups into hydrophobic naphthalene diimide cores, and prepares a series of high-performance naphthalene diimide anolytes. Under the synergistic effect of π-π stacking and H-bonding networks, the naphthalene diimide exhibits excellent structural stability and the highest water solubility (1.85 M for dex-NDI) reported to date. By employing the hydrothermal method, low-cost naphthalene diimides are successfully synthesized on a hundred-gram scale of $0.16 g-1 ($2.43 Ah-1), which is also the lowest price reported to date. The constructed full battery achieves a high electron concentration of 2.4 M, a high capacity of 54.4 Ah L-1, and a power density of 318 mW cm-2 with no significant capacity decay observed during long-duration cycling. These findings provide crucial support for the commercialization of AORFBs and pave the way for revolutionary developments in neutral AORFBs.

Self-Assembly of Amphiphilic PDI and NDI Derivatives with Opposite Thermoresponsive Fluorescent Behaviors in Aqueous Solution

This work presents a study of the thermally induced aggregation of perylene diimide (PDI) and naphthalene diimide (NDI) derivatives modified with oligo ethylene glycol (OEG) chains in aqueous solution. Water-soluble and flexible OEG side chains were introduced into the π-core of glutamate-modified NDI and PDI structures, and the aggregation process was modulated by heating or cooling in water. Interestingly, a rare opposite temperature response of fluorescent behavior from the two amphiphilic chromophores was revealed, in which the PDI exhibited fluorescent enhancement, while fluorescent quenching upon temperature increase was observed from the NDI assembly. The mechanism of thermally induced aggregation is clearly explained by studies with various spectroscopic techniques including UV-visible, fluorescence, 1H NMR, 2D NMR spectroscopy, and SEM observation as well as control experiments operated in DMSO solution. It is found that although similar J-aggregates were formed by both amphiphilic chromophores in aqueous solution, the temperature response of the aggregates to temperature was opposite. The degree of PDI aggregation decreased, while that of NDI increased upon temperature rising. This research paves a valuable way for understanding the complicated supramolecular behaviors of amphiphilic chromophores.

Supramolecular Polymer Polymorphism: Spontaneous Helix-Helicoid Transition through Dislocation of Hydrogen-Bonded π-Rosettes

Polymorphism, a phenomenon whereby disparate self-assembled products can be formed from identical molecules, has incited interest in the field of supramolecular polymers. Conventionally, the monomers that constitute supramolecular polymers are engineered to facilitate one-dimensional aggregation and, consequently, their polymorphism surfaces primarily when the states of assembly differ significantly. This engenders polymorphs of divergent dimensionalities such as one- and two-dimensional aggregates. Notwithstanding, realizing supramolecular polymer polymorphism, wherein polymorphs maintain one-dimensional aggregation, persists as a daunting challenge. In this work, we expound upon the manifestation of two supramolecular polymer polymorphs formed from a large discotic supramolecular monomer (rosette), which consists of six hydrogen-bonded molecules with an extended π-conjugated core. These polymorphs are generated in mixtures of chloroform and methylcyclohexane, attributable to distinctly different disc stacking arrangements. The face-to-face (minimal displacement) and offset (large displacement) stacking arrangements can be predicated on their distinctive photophysical properties. The face-to-face stacking results in a twisted helix structure. Conversely, the offset stacking induces inherent curvature in the supramolecular fiber, thereby culminating in a hollow helical coil (helicoid). While both polymorphs exhibit bistability in nonpolar solvent compositions, the face-to-face stacking attains stability purely in a kinetic sense within a polar solvent composition and undergoes conversion into offset stacking through a dislocation of stacked rosettes. This occurs without the dissociation and nucleation of monomers, leading to unprecedented helicoidal folding of supramolecular polymers. Our findings augment our understanding of supramolecular polymer polymorphism, but they also highlight a distinctive method for achieving helicoidal folding in supramolecular polymers.

Substituent-Induced Supramolecular Aggregates of Edge Functionalized Nanographenes

Precisely controlled molecular assemblies often display intriguing morphologies and/or functions arising from their structures. The application of the concept of the self-assembly for controlling the aggregation of nanographenes (NGs) is challenging. The title NGs are those carrying both long alkyl chains and tris(phenylisoxazolyl)benzene (TPIB) on the edge. The former group secures the affinity of NGs for organic solvents, and the latter group drives the 1D arrangement of NGs through the interactions between the TPIB units. The concentration-dependent and temperature variable ¹ H NMR, UV-vis, and PL spectra demonstrate the aggregation of NGs in 1,2-dichloroethane, and the aggregation is controllable by the regulation of the solvent polarity. AFM images give the stacked structures of the NGs, and these aggregates turn out to be network polymeric structures at a high concentration. These observations demonstrate that the synergy of the face-to-face interactions between the surfaces and the interactions between the TPIB units are effective for controlling the self-assembly of the NGs.

Structural and Thermodynamic Control of Supramolecular Polymers and DNA Assemblies with Cyanuric Acid: Influence of Substituents and Intermolecular Interactions

Understanding the interactions and thermodynamic parameters that govern the structure and stability of supramolecular polymers is challenging because of their flexible nature and high sensitivity to weak intermolecular interactions. The application of both experimental and computational analyses reveals the role that substituents on cyanuric acid (Cy), and other nitrogen-containing heterocycles, play in the formation of novel helical supramolecular structures. In this report, we focus on how noncovalent interactions, including steric and stacking interactions, modulate the structural and physical properties of these assemblies. In-depth analyses and several examples of critical steric and electrostatic effects provide insight into the relationship between intermolecular interactions of Cy with nucleic acids and the structure and thermodynamic stability of the supramolecular polymers they form.

Self-Assembly of Nanographenes

Suitably decorated small aromatic systems can organize stacked structures that display interesting properties arising from their unique morphologies. Although nanographenes produced by top-down methods have graphitic domains and can in principle be applied for such supramolecular systems, to our knowledge, no such example has been reported thus far. This is partly because of their limited solubility in organic solvents and partly because of their wide lateral size distribution. To realize nanographene-based supramolecular aggregates, nanographenes carrying alkyl chains with narrow lateral size distributions are employed. We find that the nanographenes undergo self-assembly and that self-assembly is regulated by concentration, solvent polarity, temperature, and sonication. Optical measurements and AFM images indicate that stacked structures are possible candidates for aggregates. A molecular mechanics calculation models the interactions in the aggregates. The nanographenes showed concentration-dependent morphologies on mica, stacked structures at low concentrations and polymer-like network structures on mica at higher concentrations.

Semiaromatic polyamides with enhanced charge carrier mobility

The control of local order in polymer semiconductors using non-covalent interactions may be used to engineer materials with interesting combinations of mechanical and optoelectronic properties.

Unfolding multi-stranded perylene bisimide LC columns - a mesogen design for efficient nanoscale multilayer self-assembly

A mesogen tethered, twofold bay-substituted perylene bisimide (PBI) is found to generate a columnar phase, which unfolds and gradually transforms to a completely nanosegregated multilayer columnar-lamellar liquid crystal. The structure is based on the formation of bundles of H-bonded PBI strands in the central layer. This design opens the way to new complex multifunctional materials.

Self-Sorting Supramolecular Polymerization: Helical and Lamellar Aggregates of Tetra-Bay-Acyloxy Perylene Bisimide

A new perylene bisimide (PBI), with a fluorescence quantum yield up to unity, self‐assembles into two polymorphic supramolecular polymers. This PBI bears four solubilizing acyloxy substituents at the bay positions and is unsubstituted at the imide position, thereby allowing hydrogen‐bond‐directed self‐assembly in nonpolar solvents. The formation of the polymorphs is controlled by the cooling rate of hot monomer solutions. They show distinctive absorption profiles and morphologies and can be isolated in different polymorphic liquid‐crystalline states. The interchromophoric arrangement causing the spectral features was elucidated, revealing the formation of columnar and lamellar phases, which are formed by either homo‐ or heterochiral self‐assembly, respectively, of the atropoenantiomeric PBIs. Kinetic studies reveal a narcissistic self‐sorting process upon fast cooling, and that the transformation into the heterochiral (racemic) sheetlike self‐assemblies proceeds by dissociation via the monomeric state.

Supramolecular architecture and electrical conductivity in organic semiconducting thin films

Organic thin films are an essential component of the structure of optical and electronic devices. However, the optical and electrical properties of these films depend on their supramolecular architecture, which may vary according to the techniques used to manufacture them. Here, the correlation between conductivity and supramolecular architecture was investigated. The supramolecular architecture was analyzed in terms of the molecular organization and J- or H-aggregation established during the fabrication of perylene tetracarboxylic diimide (PTCD) nanometric films. Three deposition techniques, Langmuir-Schaefer (LS), Langmuir-Blodgett (LB), and Physical Vapor Deposition (PVD), were evaluated. The UV-vis absorption spectra indicated that LS, LB, and PVD films grow homogeneously. Also, the presence of J and H aggregates was observed for all films, the H aggregates prevailing for the LB film. The FTIR measurements suggested that the molecular organization is similar for LS and LB films, with a tendency to form head-on organization onto a solid substrate. For the PVD film, the perylene macrocycles are inclined approximately 45° relative to the substrate. AFM measurements indicated a homogenous surface for all films. In terms of electrical conductivity, the highest conductivity was found for LS, followed by LB and PVD. The conductivity values were interpreted in terms of molecular organization and J- or H-aggregate formation.

Two-Dimensional Hydrogen-Bonded Nanoarchitecture Composed of Rectangular 3,4,9,10-Perylenetetracarboxylic Diimide and Boomerang-Shaped Molecules Resulting from the Dissociation of 1,3,5-Tris(4-aminophenyl)benzene

The self-assembly of 3,4,9,10-perylenetetracarboxylic diimide (PTCDI) with the star-shaped 1,3,5-tris(4-aminophenyl)benzene (TAPB) on Au(111) is investigated using scanning tunneling microscopy. PTCDI forms a compact canted arrangement on the gold surface. When TAPB is sublimated at a high temperature, the molecule dissociates into a 4-aminophenyl group and a boomerang-shaped compound. The boomerang molecule self-assembles with PTCDI to create a two-dimensional (2D) nanoarchitecture stabilized by N-H···O-C hydrogen bonds between the dissociated TAPB and PTCDI. The molecular ratio of this multicomponent structure is 1:1.

Supramolecular Copolymerization Strategy for Realizing the Broadband White Light Luminescence Based on N-Deficient Porous Graphitic Carbon Nitride (g-C3N4)

The N-deficient porous g-C₃N₄ with broadband white light emission was constructed by supramolecular copolymerization design, which combined organic copolymers cyanuric acid and 2,4,6-triaminopyrimidine with melamine upon the mixture gas environment of (95%)N₂/(5%)H₂. Herein, we achieved great breakthrough in narrowing the band gap of g-C₃N₄ from 2.64 to 1.39 eV. Furthermore, in contrast to pristine g-C₃N₄, we demonstrated that the emission wavelengths of N-deficient porous g-C₃N₄ can be tuned from narrow blue to broadband white range, where the optimal white light coordinate position is (0.297, 0.345). The prepared N-deficient porous g-C₃N₄ overcomes the limitation of the narrow adjusting range of optical properties while using conventional g-C₃N₄ and makes it more promising for applications in solid-state displays.

Tunable Supramolecular Nanoarchitectures Constructed by the Complexation of Diphenanthro-24-Crown-8/Cesium(I) with Nickel(II) and Silver(I) Ions

Tunable supramolecular nanoarchitectures have received enormous attention because of their potential in materials fabrication. Herein, a variety of morphologically intriguing nanoarchitectures have been constructed from diphenanthro-24-crown-8 ether (DPC) and metal ions. SEM and TEM showed that the self-assembled nanofibers undergo a Cs^I -induced transformation into regular nanoribbons, and further into nanospheres and nanoparticles by the complexation of Ni^II and Ag^I ions because of the strong ion-dipole interaction. Moreover, the X-ray crystal structure determination and powder X-diffraction data further confirmed that these morphological transformations resulted from the different complexation between DPC and metal ions. This result provides a new strategy for the subtle manipulation of supramolecular assemblies.

Hydrogen bond-directed supramolecular polymorphism leading to soft and hard molecular ordering

Transformation of metastable supramolecular stacks of hydrogen-bonded rosettes composed of an ester-containing barbiturated naphthalene into crystalline nanosheets occurs through the rearrangement of hydrogen-bonding patterns.

Light-Driven Continuous Twist Movements of Microribbons

Despite many advances in the development of artificial systems with helical twist motions or deformations, obtaining materials that can undergo continuous twist movements upon an energy input remains a great challenge. In this work, a continuous twist movement of microribbons driven by scanning laser irradiation, a process that a twist generates initially at one end of the microribbon and is continuously transmitted to the other end and then kept twisting, is reported. Key factors to the achievement of this movement are the fabrication of elastic microribbons that possess relatively low elastic modulus and diagonal photoinduced π-stacking distortion relative to the microribbon long axis. Furthermore, the scanning laser irradiation is required to drive the π-stacking distortion with the spatiotemporal coordination for the continuous twist movement of microribbons. These findings may be extended to the achievement of other sophisticated continuous movements of microscale systems.

Design, synthesis and structure of novel G-2 melamine-based dendrimers incorporating 4-(n-octyloxy)aniline as a peripheral unit

Background: 4-(n-Octyloxy)aniline is a known component in the elaboration of organic materials with mesogenic properties such as N-substituted Schiff bases, perylene bisimide assemblies with a number of 2-amino-4,6-bis[4-(n-octyloxy)phenylamino]-s-triazines, amphiphilic azobenzene-containing linear-dendritic block copolymers and G-0 monomeric or dimeric dendritic liquid crystals with photochromic azobenzene mesogens. The present ab initio study explores a previously unknown use of 4-(n-octyloxy)aniline in the synthesis, structure and supramolecular behaviour of new dendritic melamines.

Results: Starting from 4-(n-octyloxy)aniline, seven G-2 melamine-based dendrimers were obtained in 29–79% overall yields. Their iterative convergent- and chemoselective synthesis consisted of S_N2-Ar aminations of cyanuric chloride and final triple N-acylations and Williamson etherifications (→ G-2 covalent trimers) or stoichiometric carboxyl/amino 1:3 neutralisations (→ G-2 ionic trimers). These transformations connected G-1 chloro- and amino-termini dendrons to m-trivalent cores (triazin-2,4,6-triyl and benzene-1,3,5-triyl units) or tripodands (central building blocks), such as N-substituted melamines with 4-hydroxyphenyl or phenyl-4-oxyalkanoic motifs. Owing to the diversity of cores and central building blocks, the structural assortment of the dendritic series was disclosed by solvation effects (affecting reactivity), rotational stereodynamism and self-organisation phenomena (determining a vaulted and/or propeller macromolecular shape in solution). DFT calculations (in solution), (VT) NMR and IR (KBr) spectroscopy supported these assignments. TEM analysis revealed the ability of the title compounds towards self-assembling into homogeneously packed spherical nano-aggregates.

Conclusions: The (non)covalent synthesis and step-by-step structural elucidation of novel G-2 melamine dendrimers based on 4-(n-octyloxy)aniline are reported. Our study demonstrates the crucial influence of the nature (covalent vs ionic) of the dendritic construction in tandem with that of its central building blocks on the aptitude of dendrimers to self-organise in solution and to self-assembly in the solid state.

Discrete π-Stacks of Perylene Bisimide Dyes within Folda-Dimers: Insight into Long- and Short-Range Exciton Coupling

Four well-defined π-stacks of perylene bisimide (PBI) dyes were obtained in solution by covalent linkage of two chromophores with spacer units of different length and sterical demand. Structural elucidation of the folda-dimers by in-depth nuclear magnetic resonance studies and geometry optimization at the level of density functional theory suggest different, but highly defined molecular arrangements of the two chromophores in the folded state enforced by the various spacer moieties. Remarkably, the dye stacks exhibit considerably different optical properties as investigated by UV/vis absorption and fluorescence spectroscopy, despite only slightly different chromophore arrangements. The distinct absorption properties can be rationalized by an interplay of long- and short-range exciton coupling resulting in optical signatures ranging from conventional H-type to monomer like absorption features with low and appreciably high fluorescence quantum yields, respectively. To the best of our knowledge, we present the first experimental proof of a PBI-based "null-aggregate", in which long- and short-range exciton coupling fully compensate each other, giving rise to monomer-like absorption features for a stack of two PBI chromophores. Hence, our insights pinpoint the importance of charge-transfer mediated short-range coupling that can significantly influence the optical properties of PBI π-stacks.

Hydrogen-bonded rosettes comprising π-conjugated systems as building blocks for functional one-dimensional assemblies

Hydrogen-bonded supermacrocycles (rosettes) are attractive disk-shaped noncovalent synthons for extended functional columnar nanoassemblies. They can serve not only as noncovalent monomer units for supramolecular polymers and discrete oligomers in a dilute solution but also as constituent entities for soft matters such as gels and lyotropic/thermotropic liquid crystals. However, what are the merits of using supramolecular rosettes instead of using expanded π-conjugated covalent molecules? This review covers the self-assembly of photochemically and electrochemically active π-conjugated molecules through the formation of supramolecular rosettes via directional complementary multiple hydrogen-bonding interactions. These rosettes comprising π-conjugated covalent functional units stack into columnar nanoassemblies with unique structures and properties. By overviewing the design principle, characterization, and properties and functionalities of various examples, we illustrate the merits of utilizing rosette motifs. Basically, one can easily access a well-defined expanded π-surface composed of multi-chromophoric systems, which can ultimately afford stable extended nanoassemblies even in a dilute solution due to the higher association constants of supermacrocyclized π-systems. Importantly, these columnar nanoassemblies exhibit unique features in self-assembly processes, chiroptical, photophysical and electrochemical properties, nanoscale morphologies, and bulk properties. Moreover, the stimuli responsiveness of individual building blocks can be amplified to a greater extent by exploiting rosette intermediates to organize them into one-dimensional columnar structures. In the latter parts of the review, we also highlight the application of rosettes in supramolecular polymer systems, photovoltaic devices, and others.

Amidoxime-modified chitosan for pigment red 224 enrichment through reversible assembly

An amidoxime-modified chitosan, featuring favorable porosity and super-lipophilic properties, was successfully prepared for pigment red 224 enrichment.

Amino acid appended perylene bisimides: self-assembly, immobilization on nanocrystalline TiO2, and electrochromic properties

Titanium dioxide (TiO₂) nanoparticle films have been used as a conducting support for the immobilisation of alanine-appended perylene bisimides (PBI-A) via dip-coating and carboxylate chemisorption.

Influence of imide-substituents on the H-type aggregates of perylene diimides bearing cetyloxy side-chains at bay positions

A series of perylene-3,4:9,10-tetracarboxylic acid diimides (PDIs, namely TYR-PDI, AEP-PDI, CET-PDI, ANP-PDI and KOD-PDI), comprising long linear cetyloxy side-chains functionalized at the 1,7-bay positions and the different substituents (i.e., hydrophobic/hydrophilic segments) symmetrically linked at the two imide-positions of the perylene core were synthesized to investigate the influence of imide-substituent patterns on the aggregation behaviours of PDIs. The photophysical properties of these PDIs were studied by UV-Vis absorption, fluorescence and time-resolved photoluminescence spectroscopy. The differences in the photophysical properties of the PDIs indicate (i) blue-shifted and broadening absorption properties in both solution and thin-films, (ii) red-shifted and broadening fluorescence behavior at their emission maximum in solution, however, blue-shifted fluorescence behavior in thin-films, and (iii) obviously longer fluorescence life-times corresponding to the existence of rotationally displaced H-type aggregates. The formation of short-range ordered rod-like microstructures through face-to-face alignment of columnar rectangular H-type PDI aggregates was rationalized by scanning electron microscopy. The X-ray diffraction study revealed that the formation of well-defined columnar rectangular (Col_rp) H-type PDI aggregates indicated a nearly constant intracolumnar stacking distance of ∼3.9 Å for all PDIs. All of these findings were consistent with the formation of hydrophobic/hydrophilic interactions between the imide-substituents in addition to the strong hydrophobic π-π stacking interactions between the conjugated perylene cores, which were enforced in the H-type PDI aggregates that spontaneously self-organized into Col_rp structures.

[Synthesis, Aggregation, Self-assembly, and Dynamic Properties of Helicene Oligomers]

 Biological systems exhibit dynamic phenomena at the macroscopic level as a result of the hierarchical integration of phenomena at the molecular level. For example, a number of amino acids compose actin proteins, which form three-dimensional structures determined by the sequence of amino acids. They form fibers by self-assembly, which then form ordered structures such as meshes, lyotropic liquid crystals (LCs), and bundles. The dynamic and reversible polymorphism between these nano- to centimeter-sized ordered structures is essential for biological functions such as cell division, contraction, and locomotion. To understand biological systems and create new functional materials, it is essential to develop a methodology to integrate phenomena at the molecular level into those at the macroscopic level using synthetic molecules. In this research, synthetic oligomers containing helicenes, which exhibit reversible structural transitions between cylindrical double helices and random coils in response to thermal stimuli, were employed as building blocks for the development of such a methodology. The properties of homo- and hetero-double helices at the molecular level were first controlled by taking advantage of the diversity of their molecular structures. Then, nano- to micrometer-sized structures were constructed by the self-assembly of hetero-double helices, which include fibers/gels, vesicles, and lyotropic LCs, and their dynamic properties were controlled by molecular design.

Supramolecularly Engineered π-Amphiphile

This article describes self-assembly of supramolecularly engineered naphthalene-diimide (NDI)-derived amphiphiles NDI-1 and NDI-2. They have the same hydrophobic/hydrophilic balance but merely differ by a single functional group, amide or ester. They exhibit distinct self-assembly in water; NDI-1 forms hydrogel, which upon aging forms crystals, whereas NDI-2 forms micelles as revealed by in-depth structural analysis using cryo-TEM, dynamic light scattering, and small-angle X-ray scattering studies. These results suggest that the H-bonding among the amide groups fully regulates the self-assembly by overruling the packing parameters. Further, the present study elucidates sharp lower critical solution temperature exhibited by these π-amphiphiles, which has been extensively studied for many important applications of water-soluble polymers but hardly known in the literature of small-molecule surfactants. Control experiments with the same water-soluble hydrophilic wedge did not show such a property, confirming this to be a consequence of the supramolecular polymerization by extended amide-amide H-bonding and not inherent to the structure of the hydrophilic wedge containing oligo-oxyethylene chains.

High-fidelity self-assembly pathways for hydrogen-bonding molecular semiconductors

The design of molecular systems with high-fidelity self-assembly pathways that include several levels of hierarchy is of primary importance for the understanding of structure-function relationships, as well as for controlling the functionality of organic materials. Reported herein is a high-fidelity self-assembly system that comprises two hydrogen-bonding molecular semiconductors with regioisomerically attached short alkyl chains. Despite the availability of both discrete cyclic and polymeric linear hydrogen-bonding motifs, the two regioisomers select one of the two motifs in homogeneous solution as well as at the 2D-confined liquid-solid interface. This selectivity arises from the high directionality of the involved hydrogen-bonding interactions, which renders rerouting to other self-assembly pathways difficult. In thin films and in the bulk, the resulting hydrogen-bonded assemblies further organize into the expected columnar and lamellar higher-order architectures via solution processing. The contrasting organized structures of these regioisomers are reflected in their notably different miscibility with soluble fullerene derivatives in the solid state. Thus, electron donor-acceptor blend films deliver a distinctly different photovoltaic performance, despite their virtually identical intrinsic optoelectronic properties. Currently, we attribute this high-fidelity control via self-assembly pathways to the molecular design of these supramolecular semiconductors, which lacks structure-determining long aliphatic chains.

Water-induced helical supramolecular polymerization and gel formation of an alkylene-tethered perylene bisimide dyad

Linking two perylene bisimide dyes through an alkylene tether enforces aggregation in aqueous media, affording helical supramolecular polymers that can form gel-like lyotropic mesophases.

Supramolecular organization of a H-bonded perylene bisimide organogelator determined by transmission electron microscopy, grazing incidence X-ray diffraction and polarized infra-red spectroscopy

Polarized FTIR and TEM helps determine the supramolecular organization of PBI gelators.

Cooperative supramolecular polymerization of a perylene diimide derivative and its impact on electron-transporting properties

H-bonding-promoted supramolecular polymerization of a perylene diimide (PDI) building block and its impact on charge carrier mobility.

One-, two-, and three-dimensional hierarchical self-assembly of non-amphiphilic low-entropy chains from nanotubes to nanoribbons and porous net-sheets

The association of some small molecules such as benzene and phthalimide with non-amphiphilic homopolymeric low-entropy chains such as PVAc, PVA, PVP, and PNIPAM has been realized by reversible addition–fragmentation chain transfer reaction (RAFT) method.

Perylene bisimide hydrogels and lyotropic liquid crystals with temperature-responsive color change

The self-assembly of perylene bisimide (PBI) dyes bearing oligo ethylene glycol (OEG) units in water affords responsive functional nanostructures characterized by their lower critical solution temperature (LCST). Tuning of the LCST is realized by a supramolecular approach that relies on two structurally closely related PBI-OEG molecules. The two PBIs socially co-assemble in water and the resulting nanostructures exhibit a single LCST in between the transition temperatures of the aggregates formed by single components. This permits to precisely tune the transition from a hydrogel to a lyotropic liquid crystal state at temperatures between 26 and 51 °C by adjusting the molar fraction of the two PBIs. Owing to concomitant changes in PBI-PBI interactions this phase transition affords a pronounced color change with "fluorescence-on" response that can be utilized as a smart temperature sensory system.