From Aggregation-Induced Emission of Au(I)–Thiolate Complexes to Ultrabright Au(0)@Au(I)–Thiolate Core–Shell Nanoclusters

Developing a label-free full-range highly selective pH nanobiosensor using a novel high quantum yield pH-responsive activated-protein-protected gold nanocluster prepared by a novel ultrasonication-protein-assisted procedure

A novel, label-free, ultra-selective, reproducible, and reversible pH nanobiosensor was developed for analyzing biofluids, food samples, and real water media utilizing a novel activated-protein-protected gold nanocluster with an ultra-narrow emission band, termed as ABSA-AuNCs. The ABSA-AuNCs were synthesized via a novel ultrasonication-protein-assisted procedure, for the first time, using activated bovine serum albumin as both capping and reducing agents. The ABSA-AuNCs revealed a highly narrow symmetric emission spectrum (λmax = 330.0 nm upon excitation at 312-317 nm), and a highly narrow size distribution of 2.9-3.7 nm along with an enhanced quantum yield of 28.3 %. At present, with a full width at half maximum (FWHM) of 14.0 nm, ABSA-AuNCs have the narrowest bandwidth of fluorescent nanomaterials reported to date. The ABSA-AuNCs were characterized for their stability, size, morphology, crystallinity, structural, and optical properties. The ABSA-AuNCs were found to be appropriate for constructing a label-free ultraselective pH nanobiosensor. A linear range over 2.0-11.0, fast response time of less than 5 s, and long-term stability of 99.7 % after 500 min were achieved. The %RSD for repeatability, intra-day reproducibility, and inter-day reproducibility was found to be 1.4 %, 1.7 %, and 2.3 %, in order, to reveal high repeatable and reproducible results. The selectivity of the pH biosensor was evaluated upon the addition of different interferents, indicating an excellent pH selectivity for the ABSA-AuNCs. Real sample analysis proved the feasibility of the ABSA-AuNCs for accurate, precise, and reliable pH sensing in biofluids (undiluted blood and urine), a variety of food samples, and several real water samples.

A fluorescent Aptasensor based on magnetic-separation strategy with gold nanoclusters for Deoxynivalenol (DON) detection

A highly sensitive method based on MBs-cDNA@Apt-AuNCs519 was developed for deoxynivalenol (DON) detection in wheat. The MBs-cDNA@Apt-AuNCs519 was established using green emission gold nanoclusters (AuNCs519) with aggregation-induced emission properties as signal probes and combining amino-modified DON-aptamer (Apt), biotin-modified DNA strand (the partially complementary to Apt (cDNA)), and streptavidin-modified magnetic beads (MBs). The Apt-AuNCs519 were well connected with MBs-cDNA without DON but dissociated from MBs-cDNA@Apt-AuNCs519 with the addition of DON, leading to a noticeable reduction in the fluorescent intensity of the aptasensor. Moreover, this fluorescence aptasensor showed two linear relationships in the concentration range of 0.1-50 ng/mL and 50-5000 ng/mL with a limit of detection of 3.73 pg/mL with good stability, reproducibility and specificity. The results were consistent with high-performance liquid chromatography and enzyme-linked immunosorbent assay methods, further indicating the potential of this method for accurate trace detection of DON in wheat.

A new luminescent nickel nanocluster with solvent and ion induced emission enhancement toward heavy metal analysis

Expanding the family of fluorescent metal clusters beyond gold, silver, and copper has always been an issue for researchers to solve. In this study, a novel type of cysteine-capped nickel nanoclusters (Cys-Ni NCs) with bright turquoise emission was developed. The as-synthesized Ni NCs showed aggregation-induced emission enhancement (AIEE) properties across Cd2+ and various polar organic solvents. Concurrently, solvents with different viscosities were used to explore the principle of solvent-induced AIEE of Cys-Ni NCs, revealing a positive correlation between fluorescence intensity and solution viscosity. In addition, the concentration of Cd2+ that induced the AIEE effect was reduced by nearly two orders of magnitude in highly viscous solvents, indicating the possibility of Cys-Ni NCs as a promising nanomaterial platform for Cd2+ sensing analysis. Moreover, we propose a novel fluorescent sensing method for rapid detection of Cu2+ based on the carboxyl group of Cys-Ni NCs coupling with Cu2+. Further, validation of Cu2+ detecting methodologies in environmental water samples with the accuracy up to 93.94% underscores their potential as robust and efficient sensing platforms. This study expands the repertoire of fluorescent metal nanoclusters for highly sensitive and selective sensing of hazardous ions and paves the way for further exploration and wide applications in Cu2+ detection in biological and medicine fields.

Portable hydrogel kit based on Michael addition reaction for (E)-2-hexenal gas detection

Plants exhibit rapid responses to biotic and abiotic stresses by releasing a range of volatile organic compounds (VOCs). Monitoring changes in these VOCs holds the potential for the early detection of plant diseases. This study proposes a method for identifying late blight in potatoes based on the detection of (E)-2-hexenal, one of the major VOC markers released during plant infection by Phytophthora infestans. By combining the Michael addition reaction with cysteine-mediated etching of aggregation-induced emission gold nanoclusters (Au NCs), we have developed a portable hydrogel kit for on-site detection of (E)-2-hexenal. The Michael addition reaction between (E)-2-hexenal and cysteine effectively alleviates the etching of cysteine-mediated Au NCs, leading to a distinct fluorescence color change in the Au NCs, enabling a detection limit of 0.61 ppm. Utilizing the superior loading and diffusion characteristics of the three-dimensional structure of agarose hydrogel, our sensor demonstrated exceptional performance in terms of sensitivity, selectivity, reaction time, and ease of use. Moreover, quantitative measurement of (E)-2-hexenal was made easier by using ImageJ software to transform fluorescent images from the hydrogel kit into digital data. Such method was effectively used for the early detection of potato late blight. This study presents a low-cost, portable fluorescent analytical tool, offering a new avenue for on-site detection of plant diseases.

Au25 Cluster-Based Atomically Precise Coordination Frameworks and Emission Engineering through Lattice Symmetry

The atomically precise metal nanoclusters (NCs) have attracted significant attention due to their superatomic behavior originating from the quantum confinement effect. This behavior makes these materials suitable for various photoluminescence-based applications, including chemical sensing, bioimaging, and phototherapy, owing to their intriguing optical properties. Especially, the manipulation of inter- or intracluster interaction through cluster-assembled materials (CAMs) presents significant pathways for modifying the photophysical properties of NCs. Herein, two distinct CAMs, Au25-Zn-Hex and Au25-Zn-Rod, were synthesized via forming a coordination bond between [Au25(p-HMBA)18]- (p-H2MBA = 4-mercaptobenzoic acid) and Zn2+. Au25-Zn-Rod exhibited a 6-fold higher luminescence intensity in the near-infrared region compared to Au25-Zn-Hex, attributed to synergistic inter- and intracluster interactions that induce exciton delocalization and structure rigidification at the atomic scale. This study highlights the potential of diverse lattice symmetries in cluster-based frameworks for tuning the photophysical properties, contributing to a deeper understanding of the structure-property relationship in Au NCs.

When Metal Nanoclusters Meet Smart Synthesis

Atomically precise metal nanoclusters (MNCs) represent a fascinating class of ultrasmall nanoparticles with molecule-like properties, bridging conventional metal-ligand complexes and nanocrystals. Despite their potential for various applications, synthesis challenges such as a precise understanding of varied synthetic parameters and property-driven synthesis persist, hindering their full exploitation and wider application. Incorporating smart synthesis methodologies, including a closed-loop framework of automation, data interpretation, and feedback from AI, offers promising solutions to address these challenges. In this perspective, we summarize the closed-loop smart synthesis that has been demonstrated in various nanomaterials and explore the research frontiers of smart synthesis for MNCs. Moreover, the perspectives on the inherent challenges and opportunities of smart synthesis for MNCs are discussed, aiming to provide insights and directions for future advancements in this emerging field of AI for Science, while the integration of deep learning algorithms stands to substantially enrich research in smart synthesis by offering enhanced predictive capabilities, optimization strategies, and control mechanisms, thereby extending the potential of MNC synthesis.

Reversible Interconversion between Ag2 and Ag6 Clusters and Their Responsive Optical Properties

The exploration of structural interconversion in clusters triggered by external stimuli has attracted significant interest due to its potential to elucidate structure-property relationships of metal clusters. In this study, two types of silver clusters, Ag2 and Ag6, are synthesized. Interestingly, the clusters exhibit reversible transformations in response to changes in the solvent conditions. The structures and optical properties of these clusters are thoroughly characterized using techniques such as mass spectrometry, single-crystal X-ray diffraction, photoluminescence, and radioluminescence spectroscopy. While both Ag2 and Ag6 display excellent photoluminescence properties, Ag2 demonstrates superior performance in X-ray radioluminescence compared to Ag6. Flexible scintillator films fabricated from Ag2 clusters exhibit outstanding X-ray imaging capabilities, achieving a spatial resolution of 15.0 lp/mm and an impressive detection limit for an X-ray dose of 0.58 μGy s-1. This detection limit is nearly 10 times lower than the typical dose rate used in X-ray diagnostics (5.5 μGy s-1). This work introduces a novel approach for designing thiol-free silver clusters capable of solvent-dependent reversible interconversion, offering new insights into the development of silver clusters for advanced X-ray imaging applications.

Luminescent metal nanoclusters and their application in bioimaging

Owing to their unique optical properties and atomically precise structures, metal nanoclusters (MNCs) constitute a new generation of optical probe materials. This mini-review provides a brief overview of luminescence mechanisms and modulation methods of luminescent metal nanoclusters in recent years. Based on these photophysical phenomena, the applications of cluster-based optical probes in optical bioimaging and related sensing, disease diagnosis, and treatment are summarized. Some challenges are also listed at the end.

Concurrent manipulation of competitive mechanisms to construct glutathione-stabilized gold nanocluster-based dual-channel molecular classifier for metal ions detection and information steganography

Understanding charge transport in metal ion-mediated glutathione-stabilized gold nanoclusters (GSH-Au NCs) has proved difficult due to the presence of various competitive mechanisms, such as electron transfer (ET) and aggregation induction effect (AIE). In this paper, we present a dual-channel fluorescence (FL) and second-order Rayleigh scattering (SRS) sensing method for high-throughput classification of metal ions, relying on the competition between ET and AIE using GSH-Au NCs. The SRS signals show significant enhancement when Pb2+, Ag+, Al3+, Cu2+, Fe3+, and Hg2+ are present, as a result of the aggregation of GSH-Au NCs. Notably, the fluorescence signal exhibits the opposite trend. The FL intensities of GSH-Au NCs are enhanced by Pb2+, Ag+, and Al3+ through the AIE mechanism, while they are quenched by Cu2+, Fe3+, and Hg2+, which is dominated by the ET mechanism. By employing principal component analysis and hierarchical cluster analysis, these signals are transformed into unique fingerprints and Euclidean distances, respectively, enabling successful distinction of six metal ions and their mixtures with a low detection limit of 30 nM. This new strategy has successfully addressed interference from impurities in the testing of real water samples, demonstrating its strong ability to detect multiple metal ions. Impressively, we have achieved molecular cryptosteganography, which involves encoding, storing, and concealing information by transforming the selective response of GSH-Au NCs to binary strings. This research is anticipated to advance utilization of nanomaterials in logic sensing and information safety, bridging the gap between molecular sensors and information systems.

Regulating Arrhenius Activation Energy and Fluorescence Quantum Yields of AuNCs-MOF to Achieve High Temperature Sensitivity in a Wide Response Window

Luminescent thermometry affords remote measurement of temperature and shows huge potential in future technology beyond those possible with traditional methods. Strategies of temperature measurement aiming to increase thermal sensitivity in a wide temperature response window would represent a pivotal step forward, but most thermometers cannot do both of them. Herein, we propose a balancing strategy to achieve a trade-off between high Arrhenius activation energy (Ea), which could stretch the temperature response windows, and fluorescence quantum yields (QYs) in a manner that will increase thermal sensitivity in a wide response window. In particular, a luminescent thermometer composed of AuNCs-MOF is prepared via a facile impregnation process to enhance QYs and Ea, responsible for high relative sensitivity (Sr) (15.6% K-1) and ultrawide temperature linearity range (from 83 to 343 K), respectively. Taking fluorescence intensity and lifetime as multiple parameters, the maximum Sr can reach 22.4% K-1 by multiple linear regression. The maximum Sr and temperature response range of the proposed thermometer outperform those of the most recent luminescent thermometers. The strategy of balancing Sr and thermal response range by regulating Ea and QYs enables the construction of ultra-accurate thermal sensors in the age of artificial intelligence.

Engineering "three-in-one" fluorescent nanozyme of Ce-Au NCs for on-site visual detection of Hg2

Hg2+ contamination poses a serious threat to the environment and human health. Although gold nanoclusters (Au NCs) have been utilized as fluorescence probes or colorimetric nanozymes for performing Hg2+ assays by using a single method, designing multifunctional nanoclusters as fluorescent nanozyme remains challenging. Herein, Ce-aggregated gold nanoclusters (Ce-Au NCs) were reported with "three in one" functions to generate strong fluorescence, excellent peroxidase-like activity, and the highly specific recognition of Hg2+ via its metallophilic interaction. A portable fluorescence and colorimetric dual-mode sensing device based on Ce-Au NCs was developed for on-site visual analysis of Hg2+. In the presence of Hg2+, fluorescence was effectively quenched and the paper-based chips gradually darkened from green till they became completely absent, while peroxidase-like activity was significantly enhanced. Two independent signals were captured by one identification unit, which provided self-validation to improve reliability and accuracy. Therefore, this work presents a simple synthesis of a multifunctional fluorescent nanozyme, and the developed portable device for on-site visual detection has considerable potential for application in the rapid on-site analysis of heavy metal ions in the environment.

Engineering in situ growth of Au nanoclusters on hydrophilic paper fibres for fluorescence calligraphy-based chemical logic gates and information encryption

Gold nanoclusters (AuNCs) are a type of rising-star fluorescence nanomaterials, but their properties and applications are hindered by the multi-step synthesis and purification routes, as well as the lack of desired supporting substrates. To enhance optical performance and working efficiency, the synthesis and applications of AuNCs are suggested to be merged with emerging substrates. Herein, glutathione-modified hydrophilic rice papers are incubated in chloroauric acid aqueous solutions, and the oxidation-reduction reaction between glutathione and Au ions enables the in situ formation of fluorescent AuNCs on the solid fibres of rice papers. The in situ growth of fluorescent AuNCs on rice papers resulted in eye-catching fluorescence tracks, similar to traditional Chinese conventional calligraphy; thus, this fluoresence calligraphy is defined in this work. The entire process, including synthesis and signal responses, is extremely simple, rapid, and repeatable. Moreover, the diversity of additive chemical reagents in the studied rice papers resulted in responsive fluorescence calligraphy, and the as-synthesized AuNC materials exhibited high reliability and optical stability. Significantly, with the integration of synchronous formation and application of Au nanoclusters on hydrophilic paper substrates, high-performance logical gates and information encryption systems were constructed, remarkably facilitating the progress of molecular sensing and important information transmission.

Mediated self-assembled gold nanoclusters with mesoporous silica particles to boost fluorescence for enhanced on-site monitoring of organophosphate pesticides

Accurate detection of organophosphate pesticides (OPs) is paramount for ensuring food safety. Dendritic mesoporous silica sphere was employed to confine gold nanoclusters (AuNCs@dmSiO2) to ameliorate fluorescent property of AuNCs. A AuNCs@dmSiO2-based fluorescent method was developed for OPs sensing. Identification of Cu2+ by AuNCs quenched AuNCs@dmSiO2 fluorescence. Interaction between Cu2+ and generated thiocholine in catalysis of acetylcholinesterase (AChE) caused fluorescence enhancement. OPs, an inhibitor of AChE, suppressed thiocholine production to cause fluorescence quenching. Based on fluorescent variation, a fluorescent method was proposed for OPs by selecting paraoxon as a model within range of 0.05-25.0 ng/mL with a limit of detection (LOD) of 0.032 ng/mL. Besides, a portable test swab was prepared for on-site monitoring OP paraoxon with a smartphone-based 3D-printing portable device with a LOD of 0.65 ng/mL. This work is highlighted by the inspiration of designing highly fluorescent AuNCs, and the provision of a viable avenue for OPs-related food analysis.

Anchoring Au nanoclusters into coordination polymers: A novel approach toward ATP detection and its application

Adenosine triphosphate (ATP) is the main source of energy required for all life activities and is used as a biomarker for diseases such as cancer. It is of great significance to design a novel fluorescent probe with favorable performance for monitoring the changes of ATP concentration. Herein, a fluorescence probe named ZnCPs@AuNCs for ATP sensing was designed and fabricated by integrating AuNCs into ZnCPs. The emission intensity of AuNCs was greatly enhanced upon the formation of the ZnCPs@AuNCs nanocomposites, which may be attributed to ZnCPs restricting the molecular motion of AuNCs. Upon the introduction of ATP, the fluorescence intensity at 564 nm of ZnCPs@AuNCs is quenched. According to this phenomenon, a sensitive and reliable ATP sensing platform was established. Moreover, ZnCPs@AuNCs were incorporated into a poly (vinyl alcohol) matrix for the fabrication of fluorescent film, which exhibited solid-state fluorescence. Inspired by the remarkable fluorescent properties of ZnCPs@AuNCs, the fluorescent hydrogel was prepared by mixing ZnCPs@AuNCs with κ-carrageenan, which demonstrated a response to ATP and favorable self-healing ability. This work presents a perspective of ZnCPs@AuNCs in multiple applications such as biosensing, fluorescent film, and hydrogel construction.

Direct and specific detection of methyl-paraoxon using a highly sensitive fluorescence strategy combined with phosphatase-like nanozyme and molecularly imprinted polymer

Methyl paraoxon (MP) is a highly toxic, efficient and broad-spectrum organophosphorus pesticide, which poses significant risks to ecological environment and human health. Many detection methods for MP are based on the enzyme catalytic or inhibition effect. But natural biological enzymes are relatively expensive and easy to be inactivated with a short service life. As a unique tool of nanotechnology with enzyme-like characteristics, nanozyme has attracted increasing concern. However, a large proportion of nanozymes lack the intrinsic specificity, becoming a main barrier of constraining their use in biochemical analysis. Here, we use a one-pot reverse microemulsion polymerization combine the gold nanoclusters (AuNCs) with molecularly imprinted polymers (MIPs), polydopamine (PDA) and hollow CeO2 nanospheres to synthesize the bright red-orange fluorescence probe (CeO2@PDA@AuNCs-MIPs) with high phosphatase-like activity for selective detection of MP. The hollow structure possesses a specific surface area and porous matrix, which not only increases the exposure of active sites but also enhances the efficiency of mass and electron transport. Consequently, this structure significantly enhances the catalytic activity by reducing transport distances. The introduced MIPs provide the specific recognition sites for MP. And Ce (III) can excite aggregation induced emission of AuNCs and enhance the fluorescent signal. The absolute fluorescence quantum yield (FLQY) of CeO2@PDA@AuNCs-MIPs (1.41 %) was 12.8-fold higher than that of the GSH-AuNCs (0.11 %). With the presence of MP, Ce (IV)/Ce (III) species serve as the active sites to polarize and hydrolyze phosphate bonds to generate p-nitrophenol (p-NP), which can quench the fluorescent signal through the inner-filter effect. The as-prepared CeO2@PDA@AuNCs-MIPs nanozyme-based fluorescence method for MP detection displayed superior analytical performances with wide linearities range of 0.45-125 nM and the detection limit of 0.15 nM. Furthermore, the designed method offers satisfactory practical application ability. The developed method is simple and effective for the in-field detection.

Pyridine-Bridged Covalent Organic Frameworks with Adjustable Band Gaps as Intelligent Artificial Enzymes for Light-Augmented Biocatalytic Sensing

One of the biggest challenges in biotechnology and medical diagnostics is finding extremely sensitive and adaptable biosensors. Since metal-based enzyme-mimetic biocatalysts may lead to biosafety concerns on accumulative toxicity, it is essential to synthesize metal-free enzyme-mimics with optimal biocatalytic activity and superior selectivity. Here, the pyridine-bridged covalent organic frameworks (COFs) with specific oxidase-like (OXD-like) activities as intelligent artificial enzymes for light-augmented biocatalytic sensing of biomarkers are disclosed. Because of the adjustable bandgaps of pyridine structures on the photocatalytic properties of the pristine COF structures, the pyridine-bridged COF exhibit efficient, selective, and light-responsive OXD-like biocatalytic activity. Moreover, the pyridine-bridged COF structures show tunable and light-augmented biocatalytic detection capabilities, which outperform the recently reported state-of-the-art OXD-mimics regarding biosensing efficiency. Notably, the pyridine-bridged COF exhibits efficient and multifaceted diagnostic activity, including the extremely low limit of detection (LOD), which enables visual assays for abundant reducibility biomarkers. It is believed that this design will offer unique metal-free biocatalysts for high-sensitive and low-cost colorimetric detection and also provide new insights to create highly efficient enzyme-like COF materials via linkage-modulation strategies for future biocatalytic applications.

Developing a novel ultraselective and ultrasensitive label-free direct spectrofluorimetric nanobiosensor for direct highly fast field detection of explosive triacetone triperoxide

BACKGROUND

Direct detection of the notorious explosive triacetone triperoxide (TATP) is very difficult because it lacks facile ionization and UV absorbance or fluorescence. Besides, the current indirect methods are time-consuming and need a pre-step for TATP cleavage to hydrogen peroxide. Moreover, they commonly show significant false-positive results in the presence of some camouflage which limits their field applications. Herein, for the first time, a novel label-free field-applicable spectrofluorimetric nanobiosensor was developed for direct TATP detection using a novel activated-protein protected gold nanocluster (ABSA-AuNCs; QY = 28.3 %) synthesized by a combined protein-assisted-ultrasonication procedure.

RESULTS

The ABSA-AuNCs revealed a fluorescence spectrum centered at 330.0 nm which was significantly quenched by TATP (binding constant = 154.06 M-1; ΔG = -12.5 kJ mol-1; E(%) = 88.5 %). This phenomenon was used as a basis for direct TATP quantification, providing a working range of 0.01-40.0 mg L-1 and a detection limit of 6.7 μg L-1 which is the lowest LOD provided for TATP detection up to now. A %RSD of 0.9 % and 1.56 % was obtained for repeatability and inter-day reproducibility, respectively. The selectivity was checked against a variety of camouflages, revealing ultra-selectivity. Several synthetic samples prepared by several camouflages and real samples (clay soil and real water media) were analyzed, revealing quantitative recoveries of TATP.

SIGNIFICANCE

During the production of the notorious explosive TATP, it can be discharged into water and soil. This novel method eliminated the false-positive results of traditional methods and is applicable for direct quantitative detection of camouflaged TATP and its residues in real soil and water samples in a highly short response time (2 min). The camouflaged TATP analysis is important for tracking the terrorist attacks in field conditions and analysis of soil and water can provide a first indication of the location of the production site.

Single-Atom Au-Functionalized Mesoporous SnO2 Nanospheres for Ultrasensitive Detection of Listeria monocytogenes Biomarker at Low Temperatures

Semiconductor metal oxide gas sensors have been proven to be capable of detecting Listeria monocytogenes, one kind of foodborne bacteria, through monitoring the characteristic gaseous metabolic product 3-hydroxy-2-butanone. However, the detection still faces challenges because the sensors need to work at high temperatures and output limited gas sensing performance. The present study focuses on the design of single-atom Au-functionalized mesoporous SnO2 nanospheres for the sensitive detection of ppb-level 3-hydroxy-2-butanone at low temperatures (50 °C). The fabricated sensors exhibit high sensitivity (291.5 ppm-1), excellent selectivity, short response time (10 s), and ultralow detection limit (10 ppb). The gas sensors exhibit exceptional efficacy in distinguishing L. monocytogenes from other bacterial strains (e.g., Escherichia coli). Additionally, wireless detection of 3-hydroxy-2-butanone vapor is successfully achieved through microelectromechanical systems sensors, enabling real-time monitoring of the biomarker 3-hydroxy-2-butanone. The superior sensing performance is ascribed to the mesoporous framework with accessible active Au-O-Sn sites in the uniform sensing layer consisting of single-atom Au-modified mesoporous SnO2 nanospheres, and such a feature facilitates the gas diffusion, adsorption, and catalytic conversion of 3-hydroxy-2-butanone molecules in the sensing layer, resulting in excellent sensing signal output at relatively low temperature that is favorable for developing low-energy-consumption gas sensors.

A single-gold-atom addition regulates sharp redshift in the fluorescence of atomically precise nanoclusters

The manipulation of emission peaks at the atomic level and the investigation of the fluorescent origin mechanism are important issues. In this study, a phosphine-mediated modification method was employed on Au36(TBBT)24 nanocluster to produce a new gold nanocluster Au37(TBBT)21(TPP)2. The structural comparison revealed that Au37(TBBT)21(TPP)2 has a structural framework similar to that of Au36(TBBT)24 except for the reconstruction of its surface motifs, the addition of one gold atom into the kernel, and local structural distortion. Interestingly, compared with Au36(TBBT)24, the emission peak of Au37(TBBT)21(TPP)2 is red-shifted into the NIR-II windows (972 nm vs. 1152 nm in CDCl3) with a quantum yield of 1.5%. Furthermore, the origin of the NIR-II fluorescence in Au37(TBBT)21(TPP)2 and the red-shift mechanism of the emission peak were explored by combining the crystal structure and DFT calculations. The results reveal that the insertion of the 37th gold atom into the core can increase the contribution of the gold atoms to the HOMO orbitals and change the origin of their fluorescence from local excitation (LE) to inter fragment charge transfer (IFCT).

Interplay of kernel shape and surface structure for NIR luminescence in atomically precise gold nanorods

It is challenging to attain strong near-infrared (NIR) emissive gold nanoclusters. Here we show a rod-shaped cluster with the composition of [Au28(p-MBT)14(Hdppa)3](SO3CF3)2 (1 for short, Hdppa is N,N-bis(diphenylphosphino)amine, p-MBT is 4-methylbenzenethiolate) has been synthesized. Single crystal X-ray structural analysis reveals that it has a rod-like face-centered cubic (fcc) Au22 kernel built from two interpenetrating bicapped cuboctahedral Au15 units. 1 features NIR luminescence with an emission maximum at 920 nm, and the photoluminescence quantum yield (PLQY) is 12%, which is 30-fold of [Au21(m-MBT)12(Hdppa)2]SO3CF3 (2, m-MBT is 3-methylbenzenethiolate) with a similar composition and 60-fold of Au30S(S‑t‑Bu)18 with a similar structure. time-dependent DFT(TDDFT)calculations reveal that the luminescence of 1 is associated with the Au22 kernel. The small Stokes shift of 1 indicates that it has a very small excited state structural distortion, leading to high radiative decay rate (kr) probability. The emission of cluster 1 is a mixture of phosphorescence and thermally activated delayed fluorescence(TADF), and the enhancement of the NIR emission is mainly due to the promotion of kr rather than the inhibition of knr. This work demonstrates that the metal kernel and the surface structure are both very important for cluster-based NIR luminescence materials.

Room-Temperature Persistent Phosphorescence of Aggregated Gold Nanoclusters under Molecular Crystal Confinements

We report color-tunable and solvent-processable persistent fluorescence to phosphorescence switching at room temperature by doping gold nanoclusters (AuNCs) inside molecular crystals. This provides a significant insight into the tunability of the photoluminescence property of the dopant depending on the crystal environment and compactness of confinement, with the possibility of energy transfer from crystal to aggregated AuNCs. For test cases, we have doped histidine-stabilized AuNCs (HIS-AuNCs) inside histidine (HIS-AuNCs-HIS) and isophthalic acid (HIS-AuNCs-IPA) crystals, respectively, and glutathione-stabilized AuNCs (GSH-AuNCs) inside histidine crystals (GSH-AuNCs-HIS). The maximal phosphorescence decay time recorded for crystal doped aggregated AuNCs was 9.38 ms, and the photoluminescence quantum yield value was measured as 25%. The possible energy states and potential interactions between aggregated NCs and host crystals were accounted for through density functional theory calculations and docking techniques, respectively. This finding opens new possibilities for designing and producing color-tunable persistent AuNC-based luminous crystals for multilayer information encryption, display, and biological applications.

A sandwich FRET biosensor for lysozyme detection based on peptide-functionalized gold nanoparticles and FAM-labeled aptamer

Lysozyme (LYZ) plays a crucial role in the body's immune defense system. Monitoring LYZ levels can provide valuable insights into the diagnosis and severity assessment of various diseases. Traditionally, antibody-based sandwich assays are employed for LYZ detection, but they are often time-consuming and operationally complicated. In this research, a novel sandwich FRET biosensor was developed, which enables rapid detection of LYZ based on peptide-functionalized gold nanoparticles (pAuNPs) and FAM-labeled aptamer (Apt-FAM). Initially, a mixture of Apt-FAM and pAuNPs resulted in partial quenching of the Apt-FAM fluorescence emission through an inner filter effect (IFE), with negligible energy transfer because of the electrostatic repulsion between the negatively charged pAuNPs and Apt-FAM. The introduction of LYZ into the mixture drove the specific binding of Apt-FAM and pAuNPs to LYZ, facilitating the formation of a pAuNPs-LYZ-aptamer sandwich structure. The formation of this complex drew the pAuNPs and Apt-FAM into close enough proximity to enable FRET to occur, which in turn effectively quenched the fluorescence emission of FAM. The decrease in FAM fluorescence intensity was correlated with the increasing concentration of LYZ. Thus, a sandwich FRET biosensor was successfully developed for LYZ detection with a linear detection range of 0-1.75 μM and a detection limit of 85 nM. Additionally, the biosensor allowed visual detection of LYZ in a 96-well microplate, with a rapid response time of just 15 s. This study introduces a innovative sandwich FRET biosensor that combines aptamer and peptide recognition elements, offering a fast and antibody-free method for protein detection.

Aggregation-Induced Emission Phosphorescence Featured Au-Ag Coordination Polymer with a Diphosphine N-Heterocyclic Carbene Ligand for Highly Sensitive Detection of Cr(VI)

Luminescent materials with aggregation-induced emission (AIE) characteristics have been recognized as highly selective and sensitive probes for the detection of toxic metal ions in recent years. In this paper, a Au-Ag cluster-based coordination polymer [Au3Ag3(L)2(CN)6(H2O)2]n [1, L = 1,3-bis((diphenylphosphanyl)methyl)-4,5-dihydro-imidazolylidene] was prepared by in situ generation of the diphosphine N-heterocyclic carbene (PCNHCP)-type ligand L in the presence of the corresponding metal salts. Compound 1 exhibited 530 nm phosphorescence under 380 nm excitation with a QY of 6.30% and a lifetime (τ) of 7.14 μs in the solid state. 1 showed good AIE behavior in the mixture of MeOH/H2O while the best aggregation state (fwater = 90%, QY = 6.79%, τ = 6.70 μs) exhibited selective and sensitive emission quenching toward Cr(VI) ions. Ultralow detection limits of 9.7 ppb (w/w) for Cr2O72- and 17.9 ppb (w/w) for CrO42- were achieved.

Aggregation Inducing Reversible Conformational Isomerization of Surface Staple in Au18SR14 Nanoclusters

The conformation of molecules and materials is crucial in determining their properties and applications. Here, this work explores the reversible transformation between two distinct conformational isomers in metal nanoclusters. This work demonstrates the successful manipulation of a controllable and reversible isomerization of Au18SR14 within an aqueous solution through two distinct methods: ethanol addition and pH adjustment. The initial driver is the alteration of the solution environment, leading to the aggregation of Au18SR14 protected by ligands with smaller steric hindrance. At the atomic level, the folding mode of the unique Au4SR5 staple underpins the observed structural transformation. The reversal of staple conformation leads to color shifting between green and orange-red, and tailors a second emission peak at 725 nm originating from charge transfer from the thiolate to the Au9 core. This work not only deepens the understanding of the surface structure and dual-emission of metal nanoparticles, but also enhances the comprehension of their isomerization.

Kinetically Controlled Self-Assembly of Ag Nanoclusters with Enhanced Luminescence

Constructing self-assembly with definite assembly structure-property correlation is of great significance for expanding the property richness and functional diversity of metal nanoclusters (NCs). Herein, a well-designed liquid reaction strategy was developed through which a highly ordered nanofiber superstructure with enhanced green photoluminescence (PL) was obtained via self-assembly of the individual silver nanoclusters (Ag NCs). By visual monitoring of the kinetic reaction process using time-dependent and in situ spectroscopy measurements, the assembling structure growth and the structure-determined luminescence mechanisms were revealed. The as-prepared nanofibers featured a series of advantages involving a high emission efficiency, large Stokes shift, homogeneous chromophore, excellent photostability, high temperature, and pH sensibility. By virtue of these merits, they were successfully employed in various fields of luminescent inks, encryption and anticounterfeiting platforms, and optoelectronic light-emitting diode (LED) devices.

Luminescent carbon dots versus quantum dots and gold nanoclusters as sensors

Ultra-small nanoparticles, including quantum dots, gold nanoclusters (AuNCs) and carbon dots (CDs), have emerged as a promising class of fluorescent material because of their molecular-like properties and widespread applications in sensing and imaging. However, the fluorescence properties of ultra-small gold nanoparticles (i.e., AuNCs) and CDs are more complicated and well distinguished from conventional quantum dots or organic dye molecules. At this frontier, we highlight recent developments in the fundamental understanding of the fluorescence emission mechanism of these ultra-small nanoparticles. Moreover, this review carefully analyses the underlying principles of ultra-small nanoparticle sensors. We expect that this information on ultra-small nanoparticles will fuel research aimed at achieving precise control over their fluorescence properties and the broadening of their applications.

Fluorescent Enhancement of [AgS4] Microplates by Mechanical Force Induced Crystallinity Breaking

Mechanofluorochromic materials are a type of "smart" material because of their adjustable fluorescent properties under external mechanical force, making them significant members of the materials family. However, as the fluorescent characteristics of these materials highly depend on their microstructures, the still insufficiently in-depth research linking molecular structures to light emission motivates researchers to explore the fluorescent properties of these materials under external stimuli. In this work, based on synthetic [AgS4] microplates, we explore a fascinating mechanical-induced photoluminescent enhancement phenomenon. By applying mechanical force to solid-state [AgS4] to damage the surface morphology, a significant enhancement in photoluminescence is observed. Moreover, the emitted intensity increases with the extent of damage, which can be attributed to alterations in crystallinity. This work provides valuable insights into the relationship among photoluminescence, crystallinity, and mechanical force, offering new strategies for designing luminescent devices.

Interfacial Hydrogen-Bond Interactions Driven Assembly toward Polychromatic Copper Nanoclusters

Constructing versatile metal nanoclusters (NCs) assemblies through noncovalent weak interactions between inter-ligands is a long-standing challenge in interfacial chemistry, while compelling interfacial hydrogen-bond-driven metal NCs assemblies remain unexplored so far. Here, the study reports an amination-ligand o-phenylenediamine-coordinated copper NCs (CuNCs), demonstrating the impact of interfacial hydrogen-bonds (IHBs) motifs on the luminescent behaviors of metal NCs as the alteration of protic solvent. Experimental results supported by theoretical calculation unveil that the flexibility of interfacial ligand and the distance of cuprophilic CuI···CuI interaction between intra-/inter-NCs can be tailored by manipulating the cooperation between the diverse IHBs motifs reconstruction, therewith the IHBs-modulated fundamental structure-property relationships are established. Importantly, by utilizing the IHBs-mediated optical polychromatism of aminated CuNCs, portable visualization of humidity sensing test-strips with fast response is successfully manufactured. This work not only provides further insights into exploring the interfacial chemistry of NCs based on inter-ligands hydrogen-bond interactions, but also offers a new opportunity to expand the practical application for optical sensing of metal NCs.

Evolution of Excited-State Behaviors of Gold Complexes, Nanoclusters and Nanoparticles

Metal nanomaterials have been extensively investigated owing to their unique properties in contrast to bulk counterparts. Gold nanoparticles (e. g., 3-100 nm) show quasi-continuous energy bands, while gold nanoclusters (<3 nm) and complexes exhibit discrete energy levels and display entirely different photophysical properties than regular nanoparticles. This review summarizes the electronic dynamics of these three types of gold materials studied by ultrafast spectroscopy. Briefly, for gold nanoparticles, their electronic relaxation is dominated by heat dissipation between the electrons and the lattice. In contrast, gold nanoclusters exhibit single-electron transitions and relatively long excited-state lifetimes being analogous to molecules. In gold complexes, the excited-state dynamics is dominated by intersystem crossing and phosphorescence. A detailed understanding of the photophysical properties of gold nanocluster materials is still missing and thus calls for future efforts. The fundamental insights into the discrete electronic structure and the size-induced evolution in quantum-sized nanoclusters will promote the exploration of their applications in various fields.

Strategic framework for harnessing luminescent metal nanocluster assemblies in biosensing applications

The distinctive physicochemical attributes of ultra-small metal nanoclusters (MNCs) resembling those of molecules make them versatile constituents for self-assembled frameworks. This critical review scrutinizes the influence of assembly on the photoluminescence (PL) properties of MNCs and investigates their utility in biosensing applications. The investigation is initiated with an assessment of the shift from individual MNCs to assemblies and its repercussions on PL efficacy. Subsequently, two distinct biosensing modalities are explored: assembly-driven detection mechanisms and detection predicated on structural modifications in assembled MNCs. Through meticulous examination, we underscore the potential of self-assembly methodologies in tailoring the PL behavior of MNCs for the detection of diverse biological analytes and diseases.

From synthesis to applications of biomolecule-protected luminescent gold nanoclusters

Gold nanoclusters (AuNCs) are a class of novel luminescent nanomaterials that exhibit unique properties of ultra-small size, featuring strong anti-photo-bleaching ability, substantial Stokes shift, good biocompatibility, and low toxicity. Various biomolecules have been developed as templates or ligands to protect AuNCs with enhanced stability and luminescent properties for biomedical applications. In this review, the synthesis of AuNCs based on biomolecules including amino acids, peptides, proteins and DNA are summarized. Owing to the advantages of biomolecule-protected AuNCs, they have been employed extensively for diverse applications. The biological applications, particularly in bioimaging, biosensing, disease therapy and biocatalysis have been described in detail herein. Finally, current challenges and future potential prospects of bio-templated AuNCs in biological research are briefly discussed.

Noncovalent Interaction Guided Precise Photoluminescence Regulation of Gold Nanoclusters in Both Isolate Species and Aggregate States

Designing luminophores bright in both isolate species and aggregate states is of great importance in many emerging cutting-edge applications. However, the conventional luminophores either emit in isolate species but quench in aggregate state or emit in aggregate state but darken in isolate species. Here we demonstrate that the precise regulation of noncovalent interactions can realize luminophores bright in both isolate species and aggregate states. It is firstly discovered that the intra-cluster interaction enhances the emission of atomically precise Au25(pMBA)18 (pMBA=4-mercaptobenzoic acid), a nanoscale luminophore, while the inter-cluster interaction quenches the emission. The emission enhancing strategies are then well-designed by both introducing exogenous substances to block inter-cluster interaction and surface manipulation of Au25(pMBA)18 at the molecular level to enhance intra-cluster interaction, opening new possibilities to controllably enhance the luminophore's photoluminescence in both isolate species and aggregate states in different phases including aqueous solution, solid state and organic solvents.

Construction of logic gate computation for the assay of the nerve agent sarin based on an AChE-based dual-channel sensing system

Nerve agents have posed a huge threat to national and human security, and their sensitive detection is crucial. Herein, based on the oxidation of Ce4+ and the aggregation-induced emission (AIE) of glutathione-protected gold nanoclusters (GSH-Au NCs), a cascade reaction was designed to prepare oxidized 3,3',5,5'-tetramethylbenzidine (oxTMB) and GSH-Au NCs crosslinked by Ce3+ (Ce3+-GSH-Au NCs). oxTMB had a broad UV-visible absorption range (500-700 nm) and was capable of quenching the fluorescence of Ce3+-GSH-Au NCs at 590 nm through the internal filtration effect (IFE). Thiocholine (TCh), the hydrolysis product of acetylthiocholine chloride (ATCl) catalyzed by acetylcholinesterase (AChE), reduced oxTMB completely, resulting in a decrease in the absorption of oxTMB and the recovery of IFE-quenched fluorescence of Ce3+-GSH-Au NCs. Nerve agent sarin (GB) hindered the production of TCh and the reduction of oxTMB by inhibiting the AChE activity, leading to the fluorescence of Ce3+-GSH-Au NCs being quenched again. The dual-output sensing system (AChE + ATCl + oxTMB + Ce3+-GSH-Au NCs) exhibited a low limit of detection to GB (2.46 nM for colorimetry and 1.18 nM for fluorimetry) and excellent selectivity toward common interferences being unable to inhibit AChE. Moreover, the intelligent logic gate constructed based on the sensing system showed promising applications in the field of smart sensing of nerve agents.

Bioinspired Surface Ligand Engineering Regulates Electron Transfers in Gold Clusterzymes to Enhance the Catalytic Activity for Improving Sensing Performance

Metal nanoclusters feature a hierarchical structure, facilitating their ability to mimic enzyme-catalyzed reactions. However, the lack of true catalytic centers, compounded by tightly bound surface ligands hindering electron transfers to substrates, underscores the need for universal rational design methodologies to emulate the structure and mechanisms of natural enzymes. Motivated by the electron transfer in active centers with specific chemical structures, by integrating the peroxidase cofactor Fe-TCPP onto the surface of glutathione-stabilized gold nanoclusters (AuSG), we engineered AuSG-Fe-TCPP clusterzymes with a remarkable 39.6-fold enhancement in peroxidase-like activity compared to AuSG. Fe-TCPP not only mimics the active center structure, enhancing affinity to H2O2, but also facilitates the electron transfer process, enabling efficient H2O2 activation. By exemplifying the establishment of a detecting platform for trace H2O2 produced by ultrasonic cleaners, we substantiate that the bioinspired surface-ligand-engineered electron transfer can improve sensing performance with a wider linear range and lower detection limit.

White-Emitting Gold Nanocluster Assembly with Dynamic Color Tuning

We report that constructed Au nanoclusters (NCs) can afford amazing white emission synergistically dictated by the Au(0)-dominated core-state fluorescence and Au(I)-governed surface-state phosphorescence, with record-high absolute quantum yields of 42.1% and 53.6% in the aqueous solution and powder state, respectively. Moreover, the dynamic color tuning is achieved in a wide warm-to-cold white-light range (with the correlated color temperature varied from 3426 to 24 973 K) by elaborately manipulating the ratio of Au(0) to Au(I) species and thus the electron transfer rate from staple motif to metal kernel. This study not only exemplifies the successful integration of multiple luminescent centers into metal NCs to accomplish efficient white-light emission but also inspires a feasible pathway toward customizing the optical properties of metal NCs by regulating electron transfer kinetics.

Bioelectrocatalytic Activity of One-Dimensional Porous Pt Nanoribbons for Efficient Inhibition of Tumor Growth and Metastasis

Designing and synthesizing one-dimensional porous Pt nanocrystals with unique optical, electrocatalytic, and theranostic properties are gaining lots of attention, especially to overcome the challenges of tumor recurrence and resistance to platinum-based chemotherapy. Herein, we represented an interesting report of a one-step and facile strategy for synthesizing multifunctional one-dimensional (1D) porous Pt nanoribbons (PtNRBs) with highly efficient therapeutic effects on cancer cells based on inherent electrocatalytic activity. The critical point in the formation of luminescent porous PtNRBs was the use of human hemoglobin (Hb) as a shape-regulating, stabilizing, and reducing agent with facet-specific domains on which fluorescent platinum nanoclusters at first are aggregated by aggregation-induced emission phenomena (AIE) and then crystallized into contact and penetration twins, as intermediate products, followed by shaping of the final luminescent porous ribbon nanomaterials, owing to oriented attachment association via the Ostwald ripening mechanism. From a medical point of view, the key strategy for effective cancer therapy occured via using low-dosage ethanol in the presence of electroactive porous PtNRBs based on intracellular ethanol oxidation-mediated reactive oxygen species (ROS) generation. The role of heme groups of Hb, as electrocatalytically active centers, was successfully demonstrated in both kinetically controlled anisotropic growth of NRBs for slowing down the reduction of Pt(II) followed by oligomerization of Pt(II)-Hb complexes via platinophilic interactions as well as electrocatalytic ethanol oxidation for therapy. Interestingly, hyaluronic acid-targeted (HA) Hb-PtNRB in the presence of low-dose ethanol caused extraordinary arrest of tumor growth and metastasis with no recurrence even after the treatment course stopped, which caused elongation of tumor-bearing mice survival. HA/Hb-PtNRB was completely biocompatible and exhibited high tumor-targeting efficacy for fluorescent imaging of breast tumors. Therefore, the synergistic electrocatalytic activity of PtNRBs is presented as an efficient and safe cancer theranostic method for the first time.

Enzyme-activatable charge transfer in gold nanoclusters

Surface-protecting ligands, as a major component of metal nanoclusters (MNCs), can dominate molecular characteristics, performance behaviors, and biological properties of MNCs, which brings diversity and flexibility to the nanoclusters and largely promotes their applications in optics, electricity, magnetism, catalysis, biology, and other fields. We report herein the design of a new kind of water-soluble luminescent gold nanoclusters (AuNCs) for enzyme-activatable charge transfer (CT) based on the ligand engineering of AuNCs with 6-mercaptopurine ribonucleoside (MPR). This elaborately designed cluster, Au5(MPR)2, can form a stable intramolecular CT state after light excitation, and exhibits long-lived color-tunable phosphorescence. After the cleavage by purine nucleoside phosphorylase (PNP), the CT triplet state can be easily directed to a low-lying energy level, leading to a bathochromic shift of the emission band accompanied by weaker and shorter-lived luminescence. Remarkably, these ligand-engineered AuNCs show high affinity towards PNP as well as decent performance for analyzing and visualizing enzyme activity and related drugs. The work of this paper provides a good example for diversifying physicochemical properties and application scenarios of MNCs by rational ligand engineering, which will facilitate future interest and new strategies to precisely engineer solution-based nanocluster materials.

Platinum complexes with aggregation-induced emission

Transition metal-containing materials with aggregation-induced emission (AIE) have brought new opportunities for the development of biological probes, optoelectronic materials, stimuli-responsive materials, sensors, and detectors. Coordination compounds containing the platinum metal have emerged as a promising option for constructing effective AIE platinum complexes. In this review, we classified AIE platinum complexes based on the number of ligands. We focused on the development and performance of AIE platinum complexes with different numbers of ligands and discussed the impact of platinum ion coordination and ligand structure variation on the optoelectronic properties. Furthermore, this review analyzes and summarizes the influence of molecular geometries, stacking models, and aggregation environments on the optoelectronic performance of these complexes. We provided a comprehensive overview of the AIE mechanisms exhibited by various AIE platinum complexes. Based on the unique properties of AIE platinum complexes with different numbers of ligands, we systematically summarized their applications in electronics, biological fields, etc. Finally, we illustrated the challenges and opportunities for future research on AIE platinum complexes, aiming at giving a comprehensive summary and outlook on the latest developments of functional AIE platinum complexes and also encouraging more researchers to contribute to this promising field.

Structure Effects of Ligands in Gold-Ligand Complexes for Controlled Formation of Gold Nanoclusters

Metal nanoclusters (NCs) are a special class of nanoparticles composed of a precise number of metal atoms and ligands. Because the proportion of ligands to metal atoms is high in metal NCs, the ligand type determines the physical properties of metal NCs. Furthermore, ligands presumably govern the entire formation process of the metal NCs. However, their roles in the synthesis, especially as factors in the uniformity of metal NCs, are not understood. It is because the synthetic procedure of metal NCs is highly convoluted. The synthesis is initiated by the formation of various metal-ligand complexes, which have different numbers of atoms and ligands, resulting in different coordinations of metal. Moreover, these complexes, as actual precursors to metal NCs, undergo sequential transformations into a series of intermediate NCs before the formation of the desired NCs. Thus, to resolve the complicated synthesis of metal NCs and achieve their uniformity, it is important to investigate the reactivity of the complexes. Herein, we utilize a combination of mass spectrometry, density functional theory, and electrochemical measurements to understand the ligand effects on the reactivity of AuI-thiolate complexes toward the reductive formation of Au NCs. We discover that the stability of the complexes can be increased by either van der Waals interactions induced by the long carbon chain of ligands or by non-thiol functional groups in the ligands, which additionally coordinate with AuI in the complexes. Such structural effects of thiol ligands determine the reduction reactivity of the complexes and the amount of NaBH4 required for the controlled synthesis of the Au NCs.

Peptide-Directed Synthesis of Aggregation-Induced Emission Enhancement-Active Gold Nanoclusters for Single- and Two-Photon Imaging of Lysosome and Expressed αvβ3 Integrin Receptors

This study explores the synthesis and characterization of aggregation-induced emission enhancement (AIEE)-active gold nanoclusters (AuNCs), focusing on their near-infrared luminescence properties and potential applications in biological imaging. These AIEE-active AuNCs were synthesized via the NaBH4-mediated reduction of HAuCl4 in the presence of peptides. We systematically investigated the influence of the peptide sequence on the optical features of the AuNCs, highlighting the role of glutamic acid in enhancing their quantum yield (QY). Among the synthesized peptide-stabilized AuNCs, EECEE-stabilized AuNCs exhibited the maximum QY and a pronounced AIEE effect at pH 5.0, making them suitable for the luminescence imaging of intracellular lysosomes. The AIEE characteristic of the EECEE-stabilized AuNCs was demonstrated through examinations using transmission electron microscopy, dynamic light scattering, zeta potential analysis, and single-particle imaging. The formation of the EECEE-stabilized AuNCs was confirmed by size-exclusion chromatography and mass spectrometry. Spectroscopic and electrochemical examinations uncover the formation process of EECEE-stabilized AuNCs, comprising EECEE-mediated reduction, NaBH4-induced nucleation, complex aggregation, and subsequent cluster growth. Furthermore, we demonstrated the utility of these AuNCs as luminescent probes for intracellular lysosomal imaging, leveraging their pH-responsive AIEE behavior. Additionally, cyclic arginylglycylaspartic acid (RGD)-modified AIEE dots, derived from cyclic RGD-linked peptide-induced aggregation of EECEE-stabilized AuNCs, were developed for single- and two-photon luminescence imaging of αvβ3 integrin receptor-positive cancer cells.

Two-Orders-of-Magnitude Enhancement of Photoinitiation Activity via a Simple Surface Engineering of Metal Nanoclusters

Development of high-performance photoinitiator is the key to enhance the printing speed, structure resolution and product quality in 3D laser printing. Here, to improve the printing efficiency of 3D laser nanoprinting, we investigate the underlying photochemistry of gold and silver nanocluster initiators under multiphoton laser excitation. Experimental results and DFT calculations reveal the high cleavage probability of the surface S-C bonds in gold and silver nanoclusters which generate multiple radicals. Based on this understanding, we design several alkyl-thiolated gold nanoclusters and achieve a more than two-orders-of-magnitude enhancement of photoinitiation activity, as well as a significant improvement in printing resolution and fabrication window. Overall, this work for the first time unveils the detailed radical formation pathways of gold and silver nanoclusters under multiphoton activation and substantially improves their photoinitiation sensitivity via surface engineering, which pushes the limit of the printing efficiency of 3D laser lithography.

Loading of AuNCs with AIE effect onto cerium-based MOFs to boost fluorescence for sensitive detection of Hg2. Talanta 2024;273:125843. [PMID: 38492285 DOI: 10.1016/j.talanta.2024.125843] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Ligand-protected gold nanoclusters (AuNCs) have become promising nanomaterials in fluorescence (FL) methods for mercury ions (Hg2+) monitoring, but low FL efficiency hinders their widespread application. Herein, AuNCs/cerium-based metal-organic frameworks (AuNCs/Ce-MOFs) were prepared by loading 6-aza-2-thiothymine-protected AuNCs (ATT-AuNCs) with aggregation-induced emission (AIE) effect on the surface of Ce-MOFs by electrostatic attraction. This strategy improved the FL intensity of AuNCs through two aspects: (i) the AIE effect of ATT-AuNCs and (ii) the confinement effect of Ce-MOFs, which improved the restriction of intramolecular motion (RIM) of ATT-AuNCs. In addition, Ce-MOFs could adsorb and aggregate Hg2+ during detection, which might increase the local concentration. Therefore, based on the high FL signal of AuNCs/Ce-MOFs and enriched Hg2+, sensitive detection of Hg2+ could be achieved. More importantly, the strong specific recognition between AuNCs and Hg2+ could guarantee selectivity. The developed FL sensor exhibited superior detection performances with a wide linear range of 0.2-500 ng mL-1 and a low detection limit of 0.067 ng mL-1. Furthermore, the FL sensor used for sensitive and selective detection of Hg2+ in real samples, and the results agreed well with the standard method. In summary, this work proposed an effective and generalized strategy for improving the FL efficiency of AuNCs, which would greatly facilitate their application in pollutant monitoring.

Glutathione ligand self-assembly enables luminescence from Au15 nanoclusters for highly sensitive and selective monitoring of blood Pb(II) ions

Lead Pb(II) ions is a cumulative toxicant that impacts several biological systems and poses severe harm to young children. Accurate Pb(II) ions monitoring is thus of paramount importance. Here, we present the synthesis and application of glutathione-capped Au15 nanoclusters (Au15(SG)13) as a luminescence probe for the accurate and selective monitoring of blood Pb(II). The introduction of Pb(II) ions triggers orderly self-assembly of Au15 nanoclusters, resulting in the formation of rigid shell around Au nuclei. This limits the localized vibration of the glutathione ligands and their interaction with water molecules, greatly reducing non-radiative energy loss, and thereby enhancing the photoluminescence signal. Consequently, Au15(SG)13 nanoclusters exhibit high sensitivity for Pb(II) detection. The detection signal displays a linear relationship with Pb(II) over a wide detection range (0-800 μg/L), demonstrating a substantial sensitivity of 35.29 μg/L. Moreover, the developed nanoclusters show superior selectivity for Pb(II) ions, distinguishing them from other prevalent heavy metals. This work pave the way for the development of advanced Pb(II) sensors with high sensitivity and selectivity.

Photoluminescent Characterization of Metal Nanoclusters: Basic Parameters, Methods, and Applications

Metal nanoclusters (MNCs) can be synthesized with atomically precise structures and molecule formulae due to the rapid development of nanocluster science in recent decades. The ultrasmall size range (normally < 2 nm) endows MNCs with plenty of molecular-like properties, among which photoluminescent properties have aroused extensive attention. Tracing the research and development processes of luminescent nanoclusters, various photoluminescent analysis and characterization methods play a significant role in elucidating luminescent mechanism and analyzing luminescent properties. In this review, it is aimed to systematically summarize the normally used photoluminescent characterizations in MNCs including basic parameters and methods, such as excitation/emission wavelength, quantum yield, and lifetime. For each key parameter, first its definition and meaning is introduced and then the relevant characterization methods including measuring principles and the revelation of luminescent properties from the collected data are discussed. Then, it is discussed in details how to explore the luminescent mechanism of MNCs and construct NC-based applications based on the measured data. By means of these characterization strategies, the luminescent properties of MNCs and NC-based designs can be explained quantitatively and qualitatively. Hence, this review is expected to provide clear guidance for researchers to characterize luminescent MNCs and better understand the luminescent mechanism from the measured results.

Raspberry-like Nanoheterostructures Comprising Glutathione-Capped Gold Nanoclusters Grown on the Lanthanide Nanoparticle Surface

Bare lanthanide-doped nanoparticles (LnNPs), in particular, NaYF4:Yb3+,Tm3+ NPs (UCTm), have been seeded in situ with gold cations to be used in the subsequent growth of gold nanoclusters (AuNCs) in the presence of glutathione (GSH) to obtain a novel UCTm@AuNC nanoheterostructure (NHS) with a raspberry-like morphology. UCTm@AuNC displays unique optical properties (multiple absorption and emission wavelengths). Specifically, upon 350 nm excitation, it exhibits AuNC photoluminescence (PL) (500-1200 nm, λmax 650 nm) and Yb emission (λmax 980 nm); this is the first example of Yb sensitization in a UCTm@AuNC NHS. Moreover, under 980 nm excitation, it displays (i) upconverting PL of the UCTm (at the blue, red and NIR-I, ca. 800 nm, regions); (ii) two-photon PL of AuNC; and (iii) down-shifting PL of thulium (around 1470 nm). The occurrence of energy transfer from UCTm to AuNCs in the UCTm@AuNC NHS was evidenced by the drastic lengthening of the AuNC PL lifetime (τPL) (from few hundred nanoseconds to more than one hundred microseconds). Initial biological assessment of UCTm@AuNC NHSs in vitro revealed high biocompatibility and bioimaging capabilities upon near-infrared excitation.

Four birds with one stone: Aggregation-induced emission-type zeolitic imidazolate framework-8 based bionic nanoreactor for portable detection of olaquindox in environmental water and swine urine by smartphone

The abuse of olaquindox (OLA) as both an antimicrobial agent and a growth promoter poses significant threats to the environment and human health. While nanoreactors have proven effective in hazard detection, their widespread adoption has been hindered by tedious chemical processes and limited functionality. In this study, we introduce a novel green self-assembly strategy utilizing invertase, horseradish peroxidase, antibodies, and gold nanoclusters to form an aggregation-induced emission-type zeolitic imidazolate framework-8 nanoreactor. The results demonstrate that the lateral flow immunoassay not only allows for qualitative naked eye detection but also enables optical analysis through the fluorescence generated by aggregated gold nanoclusters and enzyme-catalyzed enhancement of visible colorimetric signals. To accommodate more detection scenarios, the photothermal effects and redox reactions of the nanoreactor can fulfill the requirements of thermal sensing and electrochemical analysis for smartphone applications. Remarkably, the proposed approach achieves a detection limit 17 times lower than conventional methods. Besides, the maximum linear range spans from 0.25 to 5 μg/L with high specificity, and the recovery is 85.2-112.9% in environmental water and swine urine. The application of this high-performance nanoreactor opens up avenues for the construction of multifunctional biosensors with great potential in monitoring hazardous materials.

Fabrication of Au nanoclusters confined on hydroxy double salt-based intelligent biosensor for on-site monitoring of urease and its inhibitors

Sensitive and convenient sensing of urease and its inhibitors is exceptionally urgent in clinical diagnosis and new drug development. In this study, the gold nanoclusters (AuNCs) and hydroxyl double salt (HDS) were composited by a simple confinement effect to prepare highly fluorescent AuNCs@HDS composites to monitor urease and its drug inhibitors. HDS was used as a matrix to confine AuNCs (AuNCs@HDS), facilitating the emission intensity of AuNCs. However, acidic conditions (low pH) can disrupt the structure of HDS to break the confinement effect, and quench the fluorescence of AuNCs. Therefore, a sensing platform for pH-related enzyme urease detection was constructed based on the sensitive response of AuNCs@HDS to pH. This sensing platform had a linear response range of 0.5-22.5 U/L and a low limit of detection (LOD) of 0.19 U/L for urease. Moreover, this sensing platform was also applied to monitor urease inhibitors and urease in human saliva samples. Additionally, a portable hydrogel kit combined with a smartphone was developed for urease detection to achieve portable, low-cost, instrument-free, and on-site monitoring of urease.

Assemble-Disassemble-Reassemble Dynamics in Copper Nanocluster-Based Superstructures

Assembling metal nanoclusters (MNCs) to form superstructures generates exciting photophysical properties distinct from those of their discrete precursors. Controlling the assembly process of MNCs and understanding the assembly-disassembly dynamics can have implications in achieving the reversible self-assembly of MNCs. The formation of self-assembled copper nanoclusters (CuNCs) as homogeneous superstructures and the underlying mechanisms governing such a process remain unexplored. Smart molecular imprinting of surface ligands can establish the forces necessary for the formation of such superstructures. Herein, we report highly luminescent, ordered superstructures of 4-phenylimidazole-2-thiol (4-PIT)-protected CuNCs with the help of l-ascorbic acid as a secondary ligand. Through a comprehensive spectroscopic analysis, we deciphered the mechanism of the self-assembly process, where the role of interligand H-bonding and C-H-π interactions was established. Notably, efficient reversibility of assembly-disassembly was demonstrated by re-establishing the interligand interactions and regenerating their photophysical and morphological signatures.

Confined Unimolecular Micelles for Directed Self-Assembly of Ultrastable Multiple-Responsive Ratiometric Fluorescent Ultrasmall Nanoparticle Assemblies

Ultrasmall fluorescent nanomaterials have been widely studied as novel fluorescent probes; however, these nanomaterials are prone to structural damage or aggregation, and the sensitivity and accuracy of most single emission fluorescence probes were very low. Therefore, the controlled synthesis of stable dual-emission ratiometric fluorescence ultrasmall assembly probes still remains a challenge. Herein, star-like polymer unimolecular micelles were utilized as a scaffold template to encapsulate fluorescent ultrasmall carbon quantum dots (CQDs) and gold nanoclusters (AuNCs) via the polymer template directed self-assembly strategy to obtain multiple-responsive ratiometric fluorescent assemblies. The assemblies were ultrastable, well-defined, and nearly monodispersed with controlled size, regular morphology, and pH- and thermal-responsiveness. The assemblies can be applied to realize rapid, sensitive, quantitative, and specific detection of Cu2+ and GSH. Moreover, the convenient rapid real-time detection was realized via the combination of the visualized paper-based sensor, and the multilevel information encryption was also achieved.

Ternary Photoanodes with AgAu Nanoclusters and CoNi-LDH for Enhanced Photoelectrochemical Water Oxidation

Atomically precise metal nanoclusters (NCs) present new opportunities for creating innovative solar-powered photoanodes due to their extraordinary physicochemical properties. Nevertheless, ultrasmall metal NCs tend to aggregate and lack active sites under light irradiation, which severely limits their widespread application. We have developed a strategy to design efficient ternary photoanodes by successively modifying AgAu NCs and CoNi-LDH on BiVO4 substrates using versatile impregnation and electrodeposition. The electronic properties of AgAu NCs facilitate the rapid transfer of photogenerated carriers on BiVO4 and CoNi-LDH. Additionally, ultrathin CoNi-LDH acts as a hole-collecting layer, which quickly extracts holes to the electrode/electrolyte interface. The synergistic effect and the matched energy levels between the ternary heterostructures promote the OER process, which significantly improved the photoelectrochemical (PEC) water oxidation performance. This study presents a new idea for further exploration of metal nanocluster-based PEC systems.