Surface Plasmon Mediated Chemical Solution Deposition of Gold Nanoparticles on a Nanostructured Silver Surface at Room Temperature

Plasmon-powered chemistry with visible-light active copper nanoparticles

In the quest for affordable materials for performing visible-light driven chemistry, we report here intriguing optical and photothermal properties of plasmonic copper nanoparticles (CuNPs). Precise tuning of reaction conditions and surface functionalization yield stable and monodisperse CuNPs, with a strong localized surface plasmon absorption at ∼580 nm. The molar extinction coefficient is estimated to be ∼7.7 × 107 M-1 cm-1 at 580 nm, which signifies their suitability for various light-harnessing studies. The characteristic wine-red colour and crystallography studies confirm the presence of mainly Cu(0) atoms in CuNPs, which showed excellent long-term colloidal and compositional stability under ambient conditions (at least 50 days). The as-synthesized oleylamine-capped CuNPs are ligand-exchanged with charged thiolate ligands of both polarities to form stable dispersions in water, with complete retention of their plasmonic properties and structural integrity (for ∼2 days and ∼6 h under inert and ambient conditions, respectively). Photothermal-conversion efficiency of CuNPs is estimated to be ∼80%, raising the surrounding temperature to ∼170 °C within ∼30 s of irradiation with a 1 W 532 nm diode laser, which is 'hot' enough to perform useful solar-vapor generation and high-temperature crystal-to-crystal phase transformation. Our work projects plasmonic CuNPs as an affordable and effective alternative to conventional metal NPs to harness light-matter interactions for future plasmon-powered chemistry.

Plasmonic Nanoparticles Boost Solar-to-Electricity Generation at Ambient Conditions

Sunlight-to-electricity conversion using solar thermoelectric generators (STEGs) is a proven technology to meet our ever-growing energy demand. However, STEGs are often operated under a vacuum with customized thermoelectric materials to achieve high performance. In this work, the incorporation of plasmonic gold nanoparticle (AuNP) based solar absorbers enabled the efficient operation of STEGs under ambient conditions with commercially available thermoelectric devices. AuNPs enhanced the performance of STEG by ∼9 times, yielding an overall solar-to-electricity conversion efficiency of ∼9.6% under 7.5 W cm-2 solar irradiance at ambient conditions. Plasmonic heat dissipated by AuNPs upon solar irradiation was used as the thermal energy source for STEGs. High light absorptivity, photothermal conversion efficiency (∼95%), and thermal conductivity of AuNPs enabled the efficient generation and transfer of heat to STEGs, with minimal radiative and convective heat losses. The power generated from plasmon-powered STEGs is used to run electrical devices as well as produce green hydrogen via the electrolysis of water.

Fabrication of heterogeneous bimetallic nanochains through photochemical welding for promoting the electrocatalytic hydrogen evolution reaction

Heterogeneous bimetallic nanochains (NCs) have gained significant attention in the field of catalysis due to their abundant active sites, multi-component synergistic catalytic, and exotic electronic structures. Here, we present a novel approach to synthesize one-dimensional heterogeneous bimetallic nanochains using a local surface plasmon resonance (LSPR) based strategy of liquid-phase photochemical welding method containing self-assembly and subsequent welding processes. Initially, we introduce additives that facilitate the self-assembly and alignment of Au nanoparticles (NPs) into orderly lines. Subsequently, the LSPR effect of the Au NPs is stimulated by light, enabling the second metal precursor to overcome the energy barrier and undergo photodeposition in the gap between the arranged Au NPs, thereby connecting the nano-metal particles. This strategy can be extended to the photochemical welding of Au NPs-Ag and Au NRs. Using electrocatalytic hydrogen evolution reaction (HER) as a proof-of-concept application, the obtained one-dimensional structure of Au5Pt1 NCs exhibit promoted HER performances, where the mass activity of the Au5Pt1 nanochains is found to be 4.8 times higher than that of Au5Pt1 NPs and 10.4 times higher than that of commercial 20 wt% Pt/C catalysts. The promoted HER performance is benefited from the electron conduction ability and abundant active sites.

Hot-Electron Dynamics Mediated Medical Diagnosis and Therapy

Surface plasmon resonance excitation significantly enhances the absorption of light and increases the generation of "hot" electrons, i.e., conducting electrons that are raised from their steady states to excited states. These excited electrons rapidly decay and equilibrate via radiative and nonradiative damping over several hundred femtoseconds. During the hot-electron dynamics, from their generation to the ultimate nonradiative decay, the electromagnetic field enhancement, hot electron density increase, and local heating effect are sequentially induced. Over the past decade, these physical phenomena have attracted considerable attention in the biomedical field, e.g., the rapid and accurate identification of biomolecules, precise synthesis and release of drugs, and elimination of tumors. This review highlights the recent developments in the application of hot-electron dynamics in medical diagnosis and therapy, particularly fully integrated device techniques with good application prospects. In addition, we discuss the latest experimental and theoretical studies of underlying mechanisms. From a practical standpoint, the pioneering modeling analyses and quantitative measurements in the extreme near field are summarized to illustrate the quantification of hot-electron dynamics. Finally, the prospects and remaining challenges associated with biomedical engineering based on hot-electron dynamics are presented.

Plasmonic visible-near infrared photothermal activation of olefin metathesis enabling photoresponsive materials

Light-induced catalysis and thermoplasmonics are promising fields creating many opportunities for innovative research. Recent advances in light-induced olefin metathesis have led to new applications in polymer and material science, but further improvements to reaction scope and efficiency are desired. Herein, we present the activation of latent ruthenium-based olefin metathesis catalysts via the photothermal response of plasmonic gold nanobipyramids. Simple synthetic control over gold nanobipyramid size results in tunable localized surface plasmon resonance bands enabling catalyst initiation with low-energy visible and infrared light. This approach was applied to the ROMP of dicyclopentadiene, affording plasmonic polymer composites with exceptional photoresponsive and mechanical properties. Moreover, this method of catalyst activation was proven to be remarkably more efficient than activation through conventional heating in all the metathesis processes tested. This study paves the way for providing a wide range of photoinduced olefin metathesis processes in particular and photoinduced latent organic reactions in general by direct photothermal activation of thermally latent catalysts.

Plasmonic nanotechnology for photothermal applications - an evaluation

The application of plasmonic nanoparticles is motivated by the phenomenon of surface plasmon resonance. Owing to the tunability of optothermal properties and enhanced stability, these nanostructures show a wide range of applications in optical sensors, steam generation, water desalination, thermal energy storage, and biomedical applications such as photothermal (PT) therapy. The PT effect, that is, the conversion of absorbed light to heat by these particles, has led to thriving research regarding the utilization of plasmonic nanoparticles for a myriad of applications. The design of conventional nanomaterials for PT conversion has focussed predominantly on the manipulation of photon absorption through bandgap engineering, doping, incorporation, and modification of suitable matrix materials. Plasmonic nanomaterials offer an alternative and attractive approach in this regard, through the flexibility in the excitation of surface plasmons. Specific advantages are the considerable improved bandwidth of the absorption, a higher efficiency of photon absorption, facile tuning, as well as flexibility in the synthesis of plasmonic nanomaterials. This review of plasmonic PT (PPT) research begins with a theoretical discussion on the plasmonic properties of nanoparticles by means of the quasi-static approximation, Mie theory, Gans theory, generic simulations on common plasmonic material morphologies, and the evaluation processes of PT performance. Further, a variety of nanomaterials and material classes that have potential for PPT conversion are elucidated, such as plasmonic metals, bimetals, and metal-metal oxide nanocomposites. A detailed investigation of the essential, but often ignored, concept of thermal, chemical, and aggregation stability of nanoparticles is another part of this review. The challenges that remain, as well as prospective directions and chemistries, regarding nanomaterials for PT conversion are pondered on in the final section of the article, taking into account the specific requirements from different applications.

Continuous nucleation of metallic nanoparticles via photocatalytic reduction

Whether in organic synthesis or solar energy conversion, light can be a powerful reagent in chemical reactions and introduce new opportunities for synthetic control including duration, intensity, interval, and energy of irradiation. Here, we report the use of a molecular photosensitizer as a reducing agent in metallic nanoparticle syntheses. Using this approach, we report three key findings. (1) Nanoparticles produced by photocatalytic reduction form via a continuous nucleation mechanism, as opposed to burst and burst-like nucleation processes typically observed in metal nanoparticle syntheses. (2) Because nucleation is continuous, as long as the solution is irradiated (and there remains excess reagents in solution), nanoparticle nucleation can be turned on and off by controlling the timing and duration of irradiation, with no observable particle growth. (3) This synthetic method extends to the formation of bimetallic nanoparticles, which we show also form via a continuous nucleation pathway, and follow predicted patterns of metal incorporation as a function of the magnitude of the difference between the reduction potentials of the two metals. Taken together, these results establish a versatile synthetic method for the formation of multimetallic nanoparticles using visible light.

Menezes L, Tittl A, Ren H, Maier SA. Optical Metasurfaces for Energy Conversion

Nanostructured surfaces with designed optical functionalities, such as metasurfaces, allow efficient harvesting of light at the nanoscale, enhancing light-matter interactions for a wide variety of material combinations. Exploiting light-driven matter excitations in these artificial materials opens up a new dimension in the conversion and management of energy at the nanoscale. In this review, we outline the impact, opportunities, applications, and challenges of optical metasurfaces in converting the energy of incoming photons into frequency-shifted photons, phonons, and energetic charge carriers. A myriad of opportunities await for the utilization of the converted energy. Here we cover the most pertinent aspects from a fundamental nanoscopic viewpoint all the way to applications.

Single-Particle Insights into Plasmonic Hot Carrier Separation Augmenting Photoelectrochemical Ethanol Oxidation with Photocatalytically Synthesized Pd-Au Bimetallic Nanorods

Understanding the nature of hot carrier pathways following surface plasmon excitation of heterometallic nanostructures and their mechanistic prevalence during photoelectrochemical oxidation of complex hydrocarbons, such as ethanol, remains challenging. This work studies the fate of carriers from Au nanorods before and after the presence of reductively photodeposited Pd at the single-particle level using scattering and emission spectroscopy, along with ensemble photoelectrochemical methods. A sub-2 nm epitaxial Pd⁰ shell was reductively grown onto colloidal Au nanorods via hot carriers generated from surface plasmon resonance excitation in the presence of [PdCl₄]^2-. These bimetallic Pd-Au nanorod architectures exhibited 14% quenched emission quantum yields and 9% augmented plasmon damping determined from their scattering spectra compared to the bare Au nanorods, consistent with injection/separation of intraband hot carriers into the Pd. Absorbed photon-to-current efficiency in photoelectrochemical ethanol oxidation was enhanced 50× from 0.00034% to 0.017% due to the photodeposited Pd. Photocurrent during ethanol oxidation improved 13× under solar-simulated AM1.5G and 40× for surface plasmon resonance-targeted irradiation conditions after photodepositing Pd, consistent with enhanced participation of intraband-excited sp-band holes and desorption of ethanol oxidation reaction intermediates owing to photothermal effects.

Plasmon-Assisted Ammonia Electrosynthesis

Ammonia is a promising liquid-phase carrier for the storage, transport, and deployment of carbon-free energy. However, the realization of an ammonia economy is predicated on the availability of green methods for the production of ammonia powered by electricity from renewable sources or by solar energy. Here, we demonstrate the synthesis of ammonium from nitrate powered by a synergistic combination of electricity and light. We use an electrocatalyst composed of gold nanoparticles, which have dual attributes of electrochemical nitrate reduction activity and visible-light-harvesting ability due to their localized surface plasmon resonances. Plasmonic excitation of the electrocatalyst induces ammonium synthesis with up to a 15× boost in activity relative to conventional electrocatalysis. We devise a strategy to account for the effect of photothermal heating of the electrode surface, which allows the observed enhancement to be attributed to non-thermal effects such as energetic carriers and charged interfaces induced by plasmonic excitation. The synergy between electrochemical activation and plasmonic activation is the most optimal at a potential close to the onset of nitrate reduction. Plasmon-assisted electrochemistry presents an opportunity for conventional limits of electrocatalytic conversion to be surpassed due to non-equilibrium conditions generated by plasmonic excitation.

Localized surface plasmon resonance induced assembly of bimetal nanochains

Bimetal nanochains (NCs) are attracting increasing attention in the fields of catalysis and electrocatalysis due to the synergistic effects in electronic and optical properties, but the fabrication of bimetal NCs remains challenging. Here, we report a general strategy named "nucleation in the irradiation then growth in the dark" for the preparation of Au/M (second metal) NCs. In the irradiation stage, the localized surface plasmon resonance (LSPR) effect of Au NPs is excited to overcome the nucleation energy barrier for the deposition of second metals (Pt, Ag and Pd). In the followed dark process, the preferential growth of second metals on the existed nucleus leads to the formation of nanochain rather than the core/shell nanostructure. In the model reaction of electrocatalytic hydrogen evolution, the optimized Au/Pt NCs showed much better performance compared with the commercial Pt/C.

Photo-assembly of plasmonic nanoparticles: methods and applications

In this review article, various methods for the light-induced manipulation of plasmonic nanoobjects are described, and some sample applications of this process are presented. The methods of the photo-induced nanomanipulation analyzed include methods based on: the light-induced isomerization of some compounds attached to the surface of the manipulated object causing formation of electrostatic, host-guest or covalent bonds or other structural changes, the photo-response of a thermo-responsive material attached to the surface of the manipulated nanoparticles, and the photo-catalytic process enhanced by the coupled plasmons in manipulated nanoobjects. Sample applications of the process of the photo-aggregation of plasmonic nanosystems are also presented, including applications in surface-enhanced vibrational spectroscopies, catalysis, chemical analysis, biomedicine, and more. A detailed comparative analysis of the methods that have been applied so far for the light-induced manipulation of nanostructures may be useful for researchers planning to enter this fascinating field.

Sensing Nitrogen Mustard Gas Simulant at the ppb Scale via Selective Dual-Site Activation at Au/Mn3O4 Interfaces

The efficient detection of chemical warfare agents (CWAs), putting at stake human life and global safety, is of paramount importance in the development of reliable sensing devices for safety applications. Herein, we present the fabrication of Mn₃O₄-based nanocomposites containing noble metal particles for the gas-phase detection of a simulant of vesicant nitrogen mustard, i.e., di(propylene glycol) monomethyl ether (DPGME). The target materials were fabricated by chemical vapor deposition of manganese oxide on Al₂O₃ substrates and subsequent functionalization with silver or gold via radio frequency sputtering. The obtained high purity composites, characterized by an intimate metal/oxide contact, yielded an outstanding efficiency in the detection of DPGME. In particular, sensing of the latter analyte with an ultralow detection limit of 0.6 ppb could be performed selectively with respect to other CWA simulants. In addition, the tuneability of selectivity patterns as a function of metal nanoparticle nature paves the way to the development of efficient and selective devices for practical end uses.

Gold Nanoparticles Supported on Alumina as a Catalyst for Surface Plasmon-Enhanced Selective Reductions of Nitrobenzene

Au nanoparticles supported on alumina (Au/Al₂O₃) with average particle size of 3.9 ± 0.7 nm and surface plasmon band centerned at 516.5 nm were prepared by deposition-precipitation method, and their photocatalytic activities for the reduction of nitrobenzene using either formic acid in acetonitrile (method A) or KOH in 2-propanol (method B) were investigated. Even at room temperature, the Au/Al₂O₃ was found to be highly active and selective for conversion of nitrobenzene to aniline when used with formic acid in acetonitrile or to azobenzene when performed with KOH in 2-propanol under irradiation with green light-emitting diode (517 nm).

Uniform Gold-Nanoparticle-Decorated {001}-Faceted Anatase TiO2 Nanosheets for Enhanced Solar-Light Photocatalytic Reactions

The {001}-faceted anatase TiO₂ micro-/nanocrystals have been widely investigated for enhancing the photocatalysis and photoelectrochemical performance of TiO₂ nanostructures, but their practical applications still require improved energy conversion efficiency under solar-light and enhanced cycling stability. In this work, we demonstrate the controlled growth of ultrathin {001}-faceted anatase TiO₂ nanosheets on flexible carbon cloth for enhancing the cycling stability, and the solar-light photocatalytic performance of the synthesized TiO₂ nanosheets can be significantly improved by decorating with vapor-phase-deposited uniformly distributed plasmonic gold nanoparticles. The fabricated Au-TiO₂ hybrid system shows an 8-fold solar-light photocatalysis enhancement factor in photodegrading Rhodamine B, a high photocurrent density of 300 μA cm^-2 under the illumination of AM 1.5G, and 100% recyclability under a consecutive long-term cycling measurement. Combined with electromagnetic simulations and systematic control experiments, it is believed that the tandem-type separation and transition of plasmon-induced hot electrons from Au nanoparticles to the {001} facet of anatase TiO₂, and then to the neighboring {101} facet, is responsible for the enhanced solar-light photochemical performance of the hybrid system. The Au-TiO₂ nanosheet system addresses well the problems of the limited solar-light response of anatase TiO₂ and fast recombination of photogenerated electron-hole pairs, representing a promising high-performance recyclable solar-light-responding system for practical photocatalytic reactions.

Nanometals for Solar-to-Chemical Energy Conversion: From Semiconductor-Based Photocatalysis to Plasmon-Mediated Photocatalysis and Photo-Thermocatalysis

Nanometal materials play very important roles in solar-to-chemical energy conversion due to their unique catalytic and optical characteristics. They have found wide applications from semiconductor photocatalysis to rapidly growing surface plasmon-mediated heterogeneous catalysis. The recent research achievements of nanometals are reviewed here, with regard to applications in semiconductor photocatalysis, plasmonic photocatalysis, and plasmonic photo-thermocatalysis. As the first important topic discussed here, the latest progress in the design of nanometal cocatalysts and their applications in semiconductor photocatalysis are introduced. Then, plasmonic photocatalysis and plasmonic photo-thermocatalysis are discussed. A better understanding of electron-driven and temperature-driven catalytic behaviors over plasmonic nanometals is helpful to bridge the present gap between the communities of photocatalysis and conventional catalysis controlled by temperature. The objective here is to provide instructive information on how to take the advantages of the unique functions of nanometals in different types of catalytic processes to improve the efficiency of solar-energy utilization for more practical artificial photosynthesis.

Importance of Plasmonic Heating on Visible Light Driven Photocatalysis of Gold Nanoparticle Decorated Zinc Oxide Nanorods

Herein we explore the role of localized plasmonic heat generated by resonantly excited gold (Au) NPs on visible light driven photocatalysis process. Au NPs are deposited on the surface of vertically aligned zinc oxide nanorods (ZnO NRs). The localized heat generated by Au NPs under 532 nm continuous laser excitation (SPR excitation) was experimentally probed using Raman spectroscopy by following the phonon modes of ZnO. Under the resonant excitation the temperature at the surface of the Au-ZnO NRs reaches up to about 300 °C, resulting in almost 6 times higher apparent quantum yield (AQY) for photocatalytic degradation of methylene blue (MB) compared to the bare ZnO NRs. Under solar light irradiation the Au-ZnO NRs demonstrated visible light photocatalytic activity twice that of what was achieved with bare ZnO NRs, while significantly reduced the activation energy required for the photocatalytic reactions allowing the reactions to occur at a faster rate.

Enhancing Localized Evaporation through Separated Light Absorbing Centers and Scattering Centers

This report investigates the enhancement of localized evaporation via separated light absorbing particles (plasmonic absorbers) and scattering particles (polystyrene nanoparticles). Evaporation has been considered as one of the most important phase-change processes in modern industries. To improve the efficiency of evaporation, one of the most feasible methods is to localize heat at the top water layer rather than heating the bulk water. In this work, the mixture of purely light absorptive plasmonic nanostructures such as gold nanoparticles and purely scattering particles (polystyrene nanoparticles) are employed to confine the incident light at the top of the solution and convert light to heat. Different concentrations of both the light absorbing centers and the light scattering centers were evaluated and the evaporation performance can be largely enhanced with the balance between absorbing centers and scattering centers. The findings in this study not only provide a new way to improve evaporation efficiency in plasmonic particle-based solution, but also shed lights on the design of new solar-driven localized evaporation systems.

Solvent Control of Surface Plasmon-Mediated Chemical Deposition of Au Nanoparticles from Alkylgold Phosphine Complexes

Bottom-up approaches to nanofabrication are of great interest because they can enable structural control while minimizing material waste and fabrication time. One new bottom-up nanofabrication method involves excitation of the surface plasmon resonance (SPR) of a Ag surface to drive deposition of sub-15 nm Au nanoparticles from MeAuPPh3. In this work we used density functional theory to investigate the role of the PPh3 ligands of the Au precursor and the effect of adsorbed solvent on the deposition process, and to elucidate the mechanism of Au nanoparticle deposition. In the absence of solvent, the calculated barrier to MeAuPPh3 dissociation on the bare surface is <20 kcal/mol, making it facile at room temperature. Once adsorbed on the surface, neighboring MeAu fragments undergo ethane elimination to produce Au adatoms that cluster into Au nanoparticles. However, if the sample is immersed in benzene, we predict that the monolayer of adsorbed solvent blocks the adsorption of MeAuPPh3 onto the Ag surface because the PPh3 ligand is large compared to the size of the exposed surface between adsorbed benzenes. Instead, the Au-P bond of MeAuPPh3 dissociates in solution (Ea = 38.5 kcal/mol) in the plasmon heated near-surface region followed by the adsorption of the MeAu fragment on Ag in the interstitial space of the benzene monolayer. The adsorbed benzene forces the Au precursor to react through the higher energy path of dissociation in solution rather than dissociatively adsorbing onto the bare surface. This requires a higher temperature if the reaction is to proceed at a reasonable rate and enables the control of deposition by the light induced SPR heating of the surface and nearby solution.

Photochemical transformations on plasmonic metal nanoparticles

The strong interaction of electromagnetic fields with plasmonic nanomaterials offers opportunities in various technologies that take advantage of photophysical processes amplified by this light-matter interaction. Recently, it has been shown that in addition to photophysical processes, optically excited plasmonic nanoparticles can also activate chemical transformations directly on their surfaces. This potentially offers a number of opportunities in the field of selective chemical synthesis. In this Review we summarize recent progress in the field of photochemical catalysis on plasmonic metallic nanostructures. We discuss the underlying physical mechanisms responsible for the observed chemical activity, and the issues that must be better understood to see progress in the field of plasmon-mediated photocatalysis.

Towards high quality triangular silver nanoprisms: improved synthesis, six-tip based hot spots and ultra-high local surface plasmon resonance sensitivity

The great application potential of triangular silver nanoprisms (TSNPRs, also referred to as triangular silver nanoplates) is hampered by the lack of methods to produce well-defined tips with high monodispersity, with easily removable ligands. In this work, a simple one-step plasmon-mediated method was developed to prepare monodisperse high-quality TSNPRs. In this approach, the sole surface capping agent was the easily removable trisodium citrate. Differing from common strategies using complex polymers, OH(-) ions were used to improve the monodispersity of silver seeds, as well as to control the growth process through inhibiting the oxidation of silver nanoparticles. Using these monodisperse high-quality TSNPRs as building blocks, self-assembled TSNPRs consisting of six-tip based "hot spots" were realized for the first time as demonstrated in a high enhancement (∼10(7)) of surface-enhanced Raman scattering (SERS). From the plasmon band shift versus the refractive index, ultra-high local surface plasmon resonance sensitivity (413 nm RIU(-1) or 1.24 eV RIU(-1), figure of merit (FOM) = 4.59) was reached at ∼630 nm, making these materials promising for chemical/biological sensing applications.

Engineering interfacial photo-induced charge transfer based on nanobamboo array architecture for efficient solar-to-chemical energy conversion

Engineering interfacial photo-induced charge transfer for highly synergistic photocatalysis is successfully realized based on nanobamboo array architecture. Programmable assemblies of various components and heterogeneous interfaces, and, in turn, engineering of the energy band structure along the charge transport pathways, play a critical role in generating excellent synergistic effects of multiple components for promoting photocatalytic efficiency.

Silver nanoparticle aggregates on metal fibers for solid phase microextraction–surface enhanced Raman spectroscopy detection of polycyclic aromatic hydrocarbons

Silver–copper fibers loaded with silver nanoparticles are used for SPME–SERS detection of polycyclic aromatic hydrocarbons, which can be further confirmed by GC-MS.

A hydride-induced-reduction strategy for fabricating palladium-based core-shell bimetallic nanocrystals

One key challenge in making high-quality bimetallic nanocrystals is to prevent self-nucleation of individual metal components. We report in this work an effective seeded growth strategy that uses activated hydrogen atoms as the reducing agent to prepare core-shell bimetallic nanocrystals. In the developed method, Pd nanocrystals serve as the seed and catalyst as well to activate H2 for the reductive deposition of Ag. The unique feature of the developed method is that the activated hydrogen atoms are confined on the surface of the Pd seeds. Consequently, the self-nucleation of Ag is effectively inhibited so that the deposition of Ag occurs only on Pd. The mechanism studies reveal that reductive growth of Ag on Pd seeds proceeds until the Pd surface is fully covered by Ag. The Ag/Pd ratio in the prepared Pd@Ag nanocrystals is readily fine-tuned by the amount of AgNO3 or H2. The method is effective for depositing Ag on Pd nanocrystal seeds with different morphologies such as nanosheets, nanocubes, tetrahedra and nanowires. More importantly, the deposition of Ag on Pd nanowires allows preparation of flexible transparent electrode material with sheet electronic conductivity of 271 S sq(-1) at a transmittance of over 90%.

Programmable photo-electrochemical hydrogen evolution based on multi-segmented CdS-Au nanorod arrays

Programmable photocatalysts for hydrogen evolution have been fabricated based on multi-segmented CdS-Au nanorod arrays, which exhibited high-efficiency and programmability in hydrogen evolution as the photoanodes in the photoelectrochemical cell. Multiple different components each possess unique physical and chemical properties that provide these cascade nanostructures with multiformity, programmability, and adaptability. These advantages allow these nanostructures as promising candidates for high efficient harvesting and conversion of solar energy.

Synthesis of monodisperse, quasi-spherical silver nanoparticles with sizes defined by the nature of silver precursors

Monodisperse, quasi-spherical silver nanoparticles (Ag NPs) with controlled sizes have been produced directly in water via adding the aqueous solutions of the mixtures of AgNO3 and sodium citrate to boiling aqueous solutions of ascorbic acid (AA). Different compounds, including NaCl, NaBr, KI, Na2SO4, Na2CO3, Na2S, and Na3PO4, are added to the AgNO3/citrate mixture solutions to form new silver compounds with fairly low solubility in water, which are used as precursors instead of soluble Ag(+) ions to synthesize Ag NPs via AA/citrate reduction. This enables us not only to produce monodisperse, quasi-spherical Ag NPs but also to tune the sizes of the resulting NPs from 16 to 30 nm according to the potential of new silver precursors as well as the concentrations of anions.

Synergistic modulation of surface interaction to assemble metal nanoparticles into two-dimensional arrays with tunable plasmonic properties

A simple strategy based on the synergistic modulation of inter-particle and substrate-particle interaction is applied for the large-scale fabrication of two-dimensional (2D) Au and Ag nanoparticle arrays. The surface charge of the substrate is used to redistribute the double layer electric charges on the particles and to modulate the inter-particle distance within the 2D nanoparticle arrays on the substrate. The resultant arrays, with a wide range of inter-particle distances, display tunable plasmonic properties. It can be foreseen that such 2D nanoparticle arrays possess potential applications as multiplexed colorimetric sensors, integrated devices and antennas. Herein, it is demonstrated that these arrays can be employed as wavelength-selective substrates for multiplexed acquisition of surface-enhanced Raman scattering (SERS) spectra. This simple one step process provides an attractive and low cost strategy to produce high quality and large area 2D ordered arrays with tunable properties.

Nanostructured materials for applications in surface-enhanced Raman scattering

This highlight summarizes current advances in the design and the employment of nanostructured materials in SERS substrates especially from the dimensional point of view. We then talk about synthesis methods and the novel properties of these nanostructured materials with their potential applications in SERS.

EG-Assisted hand-in-hand growth of prism-like Cu2O nanorods with high aspect ratios and their thermal conductive performance

EG acts as a “bridge” that controls the “hand-in-hand” growth and transforms the Cu₂O wires into prism-like nanorods.