Effective Mercury Sorption by Thiol-Laced Metal–Organic Frameworks: in Strong Acid and the Vapor Phase

Selective removal of copper from complex biological media with an agarose-immobilized high-affinity PSP ligand

The elucidation of metal-dependent biological processes requires selective reagents for manipulating metal ion levels within biological solutions such as growth media or cell lysates. To this end, we immobilized a phosphine sulfide-stabilized phosphine (PSP) ligand on agarose to create a resin for the selective removal of copper from chemically complex biological media through simple filtration or centrifugation. Comprised of a conformationally preorganized phenylene-bridged backbone, the PSP-ligand binds Cu(I) with a 1:1 stoichiometry and exhibits a pH-independent Cu(I) dissociation constant in the low zeptomolar range. Neither Zn(II), Fe(II), nor Mn(II) interact with the ligand at millimolar concentrations, thus offering a much-improved selectivity towards copper over other commonly employed solid-supported chelators such as Chelex 100. As revealed by X-ray fluorescence elemental analysis, the immobilized chelator effectively removes copper from cell culture growth media and cell lysate isolated from mouse fibroblasts. In addition to preparing copper-depleted media or cell lysates for biological studies, PSP-immobilized ligands might prove equally useful for applications in radiochemistry, materials science, and environmental science.

Heavy-Metal Ions Removal and Iodine Capture by Terpyridine Covalent Organic Frameworks

Porous materials are excellent candidates for water remediation in environmental issues. However, it is still a key challenge to design efficient adsorbents for rapid water purification from various heavy metal ions-contaminated wastewater in one step. Here, two robust nitrogen-rich covalent organic frameworks (COFs) bearing terpyridine units on the pore walls by a "bottom-up" strategy are reported. Benefitting from the strong chelation interaction between the terpyridine units and various heavy metal ions, these two terpyridine COFs show excellent removal efficiency and capability for Pb2+, Hg2+, Cu2+, Ag+, Cd2+, Ni2+, and Cr3+ from water. These COFs are shown to remove such heavy metal ions with >90% of contents at one time after the aqueous metal ions mixture is passed through the COF filter. The nitrogen-rich features of the COFs also endow them with the capability of capturing iodine vapors, offering the terpyridine COFs the potential for environmental remediation applications.

Special Issue "Design, Synthesis and Applications of Macroporous, Mesoporous, and Microporous Materials"

The intention of this Special Issue was to highlight the importance of the design, synthesis, and applications of macro-, meso-, and microporous materials [...].

Cysteamine-Anchored MOF through Post-Synthetic Modification Strategy for the Effective Removal of Mercury from Water

The introduction of cysteamine functionality, referred to as Q-ZIF-67-SH, was successfully achieved through postsynthetic modification while maintaining the structural and thermal stability of the quasi metal-organic framework Q-ZIF-67. By subjecting ZIF-67 to controlled partial deligandation at 310 °C under an air atmosphere, a substantial number of unsaturated cobalt sites were generated within the quasi ZIF-67 (Q-ZIF-67) structure. These unsaturated cobalt sites facilitated effective coordination with cysteamine, resulting in the development of the thiol-functionalized framework Q-ZIF-67-SH. The potential of these metal-organic frameworks (MOFs) for the adsorptive removal of hazardous Hg(II) was investigated. Various factors, such as the type of sorbent, pH, adsorbent dosage, initial concentration of Hg(II), and presence of coexisting ions, were thoroughly examined and comprehensively explained. Thiol-anchored MOF significantly enhanced the efficiency of Hg(II) removal, achieving an impressive removal rate of up to 99.2%. Furthermore, it demonstrated a maximum adsorption capacity of 994 mg g-1 and a distribution coefficient of 2.5 × 106 mL g-1. A good correspondence with pseudo-second-order kinetics and the Langmuir model was observed through the fitting of adsorption kinetics and the isotherm model. The thermodynamic data strongly indicate that the adsorptive removal of Hg(II) is characterized by endothermicity and spontaneity. This signifies that the process is energetically favorable and has potential for efficient Hg(II) removal. Therefore, the Q-ZIF-67-SH sorbent emerges as a promising and advantageous option for the removal of Hg(II) from water.

Unlocking Direct Lithium Extraction in Harsh Conditions through Thiol-Functionalized Metal-Organic Framework Subnanofluidic Membranes

Metal-organic framework (MOF) membranes with high ion selectivity are highly desirable for direct lithium-ion (Li+) separation from industrial brines. However, very few MOF membranes can efficiently separate Li+ from brines of high Mg2+/Li+ concentration ratios and keep stable in ultrahigh Mg2+-concentrated brines. This work reports a type of MOF-channel membranes (MOFCMs) by growing UiO-66-(SH)2 into the nanochannels of polymer substrates to improve the efficiency of MOF membranes for challenging Li+ extraction. The resulting membranes demonstrate excellent monovalent metal ion selectivity over divalent metal ions, with Li+/Mg2+ selectivity up to 103 since Mg2+ should overcome a higher energy barrier than Li+ when transported through the MOF pores, as confirmed by molecular dynamics simulations. Under dual-ion diffusion, as the Mg2+/Li+ mole ratio of the feed solution increases from 0.2 to 30, the membrane Li+/Mg2+ selectivity decreases from 1516 to 19, corresponding to the purity of lithium products between 99.9 and 95.0%. Further research on multi-ion diffusion that involves Mg2+ and three monovalent metal ions (K+, Na+, and Li+, referred to as M+) in the feed solutions shows a significant improvement in Li+/Mg2+ separation efficiency. The Li+/Mg2+ selectivity can go up to 1114 when the Mg2+/M+ molar concentration ratio is 1:1, and it remains at 19 when the ratio is 30:1. The membrane selectivity is also stable for 30 days in a highly concentrated solution with a high Mg2+/Li+ concentration ratio. These results indicate the feasibility of the MOFCMs for direct lithium extraction from brines with Mg2+ concentrations up to 3.5 M. This study provides an alternative strategy for designing efficient MOF membranes in extracting valuable minerals in the future.

Highlights in Interface of Wastewater Treatment by Utilizing Metal Organic Frameworks: Purification and Adsorption Kinetics

Polluted water has become a concern for the scientific community as it causes many severe threats to living beings. Detection or removal of contaminants present in wastewater and attaining purity of water that can be used for various purposes are a primary responsibility. Different treatment methods have already been used for the purification of sewage. There is a need for low-cost, highly selective, and reusable materials that can efficiently remove pollutants or purify contaminated water. In this regard, MOFs have shown significant potential for applications such as supercapacitors, drug delivery, gas storage, pollutant adsorption, etc. The outstanding structural diversity, substantial surface areas, and adjustable pore sizes of MOFs make them superior candidates for wastewater treatment. This Review provides an overview of the interaction science and engineering (kinetic and thermodynamic aspects with interactions) underpinning MOFs for water purification. First, fundamental strategies for the synthesis methods of MOFs, different categories, and their applicability in wastewater treatment are summarized, followed by a detailed explanation of various interaction mechanisms. Finally, current challenges and future outlooks for research on MOF materials toward the adsorption of hazardous components are discussed. A new avenue for modifying their structural characteristics for the adsorption and separation of hazardous materials, which will undoubtedly direct future work, is also summarized.

Silver Nanoparticle-Functionalized Postsynthetically Modified Thiol MOF UiO-66-NH-SH for Efficient CO2 Fixation

Thiols are essential functional groups imparting unique properties, such as reactivity and selectivity, to many vital enzymes and biomolecules. The integration of electronically soft thiol groups within metal-organic frameworks (MOFs) yields elevated reactivity and a pronounced affinity for soft metal ions. However, the scarcity of thiol-based ligands and synthetic challenges hinder the advancement of thiol-based MOFs. To bypass the difficulties of synthesizing thiol MOFs by a direct reaction between thiol-based ligands and corresponding metal salts, postsynthetic modification (PSM) of MOFs is an efficient strategy to introduce thiol functionality. Herein, we have introduced Ag nanoparticles in postsynthetically modified thiol MOFs UiO-66-NH-SH (1) (synthesized by reaction between UiO-66-NH2 and thioglycolic acid) and UiO-66-NH-SH (2) (synthesized by reaction between UiO-66-NH2 and 3-mercaptopropionic acid) to synthesize a series of heterogeneous catalysts for CO2 fixation. Catalysts Cat 1-2 and Cat 3 - 4 were synthesized from UiO-66-NH-SH (1) and UiO-66-NH-SH (2), respectively, by using varying concentrations of silver (AgNO3). Catalyst Ag@UiO-66-NH-SH (1) (Ag = 3.45%; namely Cat 2) shows the highest efficiency for the catalytic conversion of propargylic alcohol and terminal epoxide to the corresponding cyclic carbonates. Finally, a rationalized reaction mechanism is proposed by correlating our results with the current literature. This work presents a viable strategy to utilize the thiol functionality of MOFs (avoiding the complexities associated with synthesizing thiol MOFs directly from thiol ligands) as a platform for introducing catalytically active metal centers and applying them as a heterogeneous catalyst for CO2 fixation reactions.

Phosphorus removal from water by the metal-organic frameworks (MOFs)-based adsorbents: A review for structure, mechanism, and current progress

Efficacious phosphate removal is essential for mitigating eutrophication in aquatic ecosystems and complying with increasingly stringent phosphate emission regulations. Chemical adsorption, characterized by simplicity, prominent treatment efficiency, and convenient recovery, is extensively employed for profound phosphorus removal. Metal-organic frameworks (MOFs)-derived metal/carbon composites, surpassing the limitations of separate components, exhibit synergistic effects, rendering them tremendously promising for environmental remediation. This comprehensive review systematically summarizes MOFs-based materials' properties and their structure-property relationships tailored for phosphate adsorption, thereby enhancing specificity towards phosphate. Furthermore, it elucidates the primary mechanisms influencing phosphate adsorption by MOFs-based composites. Additionally, the review introduces strategies for designing and synthesizing efficacious phosphorus capture and regeneration materials. Lastly, it discusses and illuminates future research challenges and prospects in this field. This summary provides novel insights for future research on superlative MOFs-based adsorbents for phosphate removal.

Fine-tuning bromide AIE probes for Hg2+ detection in mitochondria with wash-free staining

Mercury ions (Hg2+) primarily target mitochondria in the cells. Therefore, the development of novel probes that specifically target mitochondria in the presence of Hg2+ is of immense importance. Most previously reported probes that utilize the softness of S, Te, O, and/or N atoms for Hg2+ binding often face problems such as fluorescence quenching and off-target signals. In this study, bromide-hydrocarbon pyridinium salts were designed to target the mitochondria and chelate Hg2+ via Hg-Br coordination bonds. As a prototype, four aggregation-induced emission (AIE) fluorogens, namely TPP-Br, TPP-Cl, R1, and R2, with a similar D-π-A structure but slight differences in their halogen substituents, were designed. Among them, only TPP-Br achieved the highly selective and sensitive detection of Hg2+ by triggering its AIE properties, resulting in remarkable emission enhancement (80-fold), colorimetry, and the Tyndall effect. TPP-Br exhibited high selectivity and sensitivity to Hg2+ with a detection limit of 0.35 μM, rapid response time (<10 s), and large Stokes shift of 185 nm. Their interaction modes were studied using a combination of 1H nuclear magnetic resonance spectroscopy, scanning electron microscopy, fluorescent lifetime decay, and theoretical calculations. TPP-Br exhibited a low emission background in cells, whereas in the presence of Hg2+, mitochondria were lit up with wash-free staining. This study provides a powerful tool for accurately diagnosing mercury poisoning-related diseases in mitochondria.

Robust Zinc Anode Enabled by Sulfonate-Rich MOF-Modified Separator

Aqueous zinc ion batteries (ZIBs) hold great promise for large-scale energy storage; however, severe zinc dendritic growth and side reactions on the anode dramatically impede their commercial application. Herein, a Zr-based MOF (UiO-66) functionalized with a high density of sulfonic acid (─SO3 H) groups is used to modify the glass fiber (GF) separator of ZIBs, providing a unique solution for stabilizing Zn anode. Benefiting from the strong interaction between zincophilic -SO3 H and Zn2+ , this sulfonate-rich UiO-66 modified GF (GF@UiO-S2) separator not only guarantees the homogeneous distribution of ion flux, but also accelerates the ion migration kinetics. Hence, the GF@UiO-S2 separator promotes uniform Zn plating/stripping on the Zn anode and facilitates the desolvation of hydrated Zn2+ ions at the interface, which helps guide dendrite-free Zn deposition and inhibit undesired side reactions. Accordingly, the Zn||Zn symmetric cell with this separator achieves excellent cycling stability with a long cycle life exceeding 3450 h at 3 mA cm-2 . Besides, the Zn||MnO2 full cell paired with this separator delivers remarkable cyclability with 90% capacity retention after 1200 cycles. This design of metal-organic frameworks functionalized separators provides a new insight for constructing highly robust ZIBs.

Evaluating the Role of Functional Groups in the Selective Capture of Ag(I) onto UiO-66-Type Metal-Organic Frameworks

UiO-66-type metal-organic frameworks have been considered as promising adsorbents for capturing Ag(I) from wastewater. However, uncertainties persist regarding the specific absorptivity of individual functional groups to the UiO-66 framework structure. In this study, UiO-66-type metal-organic frameworks (UiO-66-X), featuring diverse functional groups (X = -(OH)2, -(COOH)2, -NO2, -NH2, -SO3H, -(SH)2), were synthesized in situ for Ag(I) capture. The findings revealed that functionalization significantly enhanced the adsorption capacity of Ag(I). Notably, quantitative analysis showed that 1 mol of -SH functional group onto the UiO-66 framework structure can adsorb 0.73 mol of Ag(I) ions, surpassing those of -COOH, -OH, -NH2, -SO3H, and -NO2 by 2.4-, 3.5-, 3.8-, 9.1-, and 24.3-fold, respectively. This represents the first assessment of the adsorption capacity of functionalized UiO-66 for Ag(I) based on each effective functional group, addressing limitations in traditional unit mass calculations. Further, the adsorption mechanism of UiO-66-X for selectively capturing Ag(I) was elucidated through experimental and theoretical analyses. Additionally, selectivity and practical applications confirm that UiO-66-(SH)2 exhibits strong anti-interference ability, whether in natural water bodies with complex compositions or in industrial wastewater under harsh conditions. We anticipate that this study will enhance our understanding of structure-performance dependencies of multivariate MOFs for designing novel adsorbents for Ag(I) capture.

Thiol and thioether-based metal-organic frameworks: synthesis, structure, and multifaceted applications

Metal-organic frameworks (MOFs) are unique hybrid porous materials formed by combining metal ions or clusters with organic ligands. Thiol and thioether-based MOFs belong to a specific category of MOFs where one or many thiols or thioether groups are present in organic linkers. Depending on the linkers, thiol-thioether MOFs can be divided into three categories: (i) MOFs where both thiol or thioether groups are part of the carboxylic acid ligands, (ii) MOFs where only thiol or thioether groups are present in the organic linker, and (iii) MOFs where both thiol or thioether groups are part of azolate-containing linkers. MOFs containing thiol-thioether-based acid ligands are synthesized through two primary approaches; one is by utilizing thiol and thioether-based carboxylic acid ligands where the bonding pattern of ligands with metal ions plays a vital role in MOF formation (HSAB principle). MOFs synthesized by this approach can be structurally differentiated into two categories: structures without common structural motifs and structures with common structural motifs (related to UiO-66, UiO-67, UiO-68, MIL-53, NU-1100, etc.). The second approach to synthesize thiol and thioether-based MOFs is indirect methods, where thiol or thioether functionality is introduced in MOFs by techniques like post-synthetic modifications (PSM), post-synthetic exchange (PSE) and by forming composite materials. Generally, MOFs containing only thiol-thioether-based ligands are synthesized by interfacial assisted synthesis, forming two-dimensional sheet frameworks, and show significantly high conductivity. A limited study has been done on MOFs containing thiol-thioether-based azolate ligands where both nitrogen- and sulfur-containing functionality are present in the MOF frameworks. These materials exhibit intriguing properties stemming from the interplay between metal centres, organic ligands, and sulfur functionality. As a result, they offer great potential for multifaceted applications, ranging from catalysis, sensing, and conductivity, to adsorption. This perspective is organised through an introduction, schematic representations, and tabular data of the reported thiol and thioether MOFs and concluded with future directions.

Metal-organic framework boosts heterogeneous electron donor-acceptor catalysis

Metal-organic framework (MOF) is a class of porous materials providing an excellent platform for engineering heterogeneous catalysis. We herein report the design of MOF Zr-PZDB consisting of Zr6-clusters and PZDB (PZDB = 4,4'-(phenazine-5,10-diyl)dibenzoate) linkers, which served as the heterogeneous donor catalyst for enhanced electron donor-acceptor (EDA) photoactivation. The high local concentration of dihydrophenazine active centers in Zr-PZDB can promote the EDA interaction, therefore resulting in superior catalytic performance over homogeneous counterparts. The crowded environment of Zr-PZDB can protect the dihydrophenazine active center from being attacked by radical species. Zr-PZDB efficiently catalyzes the Minisci-type reaction of N-heterocycles with a series of C-H coupling partners, including ethers, alcohols, non-activated alkanes, amides, and aldehydes. Zr-PZDB also enables the coupling reaction of aryl sulfonium salts with heterocycles. The catalytic activity of Zr-PZDB extends to late-stage functionalization of bioactive and drug molecules, including Nikethamide, Admiral, and Myristyl Nicotinate. Systematical spectroscopy study and analysis support the EDA interaction between Zr-PZDB and pyridinium salt or aryl sulfonium salt, respectively. Photoactivation of the MOF-based EDA adduct triggers an intra-complex single electron transfer from donor to acceptor, giving open-shell radical species for cross-coupling reactions. This research represents the first example of MOF-enabled heterogeneous EDA photoactivation.

Advances in green materials derived from wood for detecting and removing mercury ions in water

The issue of mercury pollution in environmental remediation has garnered significant attention due to its severe health hazards to humans. Various strategies have been devised to mitigate the impact of toxic mercury ions, including coagulation, ion exchange, adsorption, membrane technology, and electrochemical treatment. Among these approaches, adsorption has emerged as an efficient and widely employed method for the uptake of low concentrations of mercury ions. It offers convenient operation, high removal efficiency, and facile regeneration of the adsorbent. Wood, being the most abundant renewable and sustainable bioresource, has garnered attention as a promising material for treating heavy metal wastewater. This is attributed to its unique physical and chemical characteristics, encompassing hierarchical pores, aligned channels, active functional groups, biodegradability, and cost-effectiveness. However, a comprehensive examination of the cutting-edge applications of wood and wood-derived biopolymers in the detection and removal of mercury ions from wastewater has yet to be undertaken. Consequently, this article presents a chronological overview of recent advancements in materials and structures derived from bulk wood and its constituents, including cellulose, lignin, hemicellulose, and tannin, with a specific focus on their utility in detecting and eliminating mercury from water sources. Subsequently, the most promising techniques and strategies involving wood and wood-derived biopolymers in addressing the predicament of mercury pollution are explored. Furthermore, this piece offers insights into the existing challenges and future prospects concerning environmentally friendly materials derived from wood, aiming to foster the development of cost-effective mercury adsorbents and detection devices.

Current advances in the detection and removal of organic arsenic by metal-organic frameworks

Arsenic (As) is a highly toxic heavy metal and has been widely concerned for its hazardous environmental impact. Aromatic organic arsenic (AOCs) has been frequently used as an animal supplement to enhance feed utilization and prevent dysentery. The majority of organic arsenic could be discharged from the body and evolve as highly toxic inorganic arsenic that is hazardous to the environment and human health via biological conversion, photodegradation, and photo-oxidation. Current environmental issues necessitate the development and application of multifunctional porous materials in environmental remediation. Compared to the conventional adsorbent, such as activated carbon and zeolite, metal-organic frameworks (MOFs) exhibit a number of advantages, including simple synthesis, wide variety, simple modulation of pore size, large specific surface area, excellent chemical stability, and easy modification. In recent years, numerous scientists have investigated MOFs related materials involved with organic arsenic. These studies can be divided into three categories: detection of organic arsenic by MOFs, adsorption to remove organic arsenic by MOFs, and catalytic removal of organic arsenic by MOFs. Here, we conduct a critical analysis of current research findings and knowledge pertaining to the structural characteristics, application methods, removal properties, interaction mechanisms, and spectral analysis of MOFs. We summarized the application of MOFs in organic arsenic detection, adsorption, and catalytic degradation. Other arsenic removal technologies and conventional substances are also being investigated. This review will provide relevant scientific researchers with references.

Noncovalent Peptide Assembly Enables Crystalline, Permutable, and Reactive Thiol Frameworks

Though thiols are exceptionally versatile, their high reactivity has also hindered the synthesis and characterization of well-defined thiol-containing porous materials. Leveraging the mild conditions of the noncovalent peptide assembly, we readily synthesized and characterized a number of frameworks with thiols displayed at many unique positions and in several permutations. Importantly, nearly all assemblies were structurally determined using single-crystal X-ray diffraction to reveal their rich sequence-structure landscape and the cooperative noncovalent interactions underlying their assembly. These observations and supporting molecular dynamics calculations enabled rational engineering by the positive and negative design of noncovalent interactions. Furthermore, the thiol-containing frameworks undergo diverse single-crystal-to-single-crystal reactions, including toxic metal ion coordination (e.g., Cd2+, Pb2+, and Hg2+), selective uptake of Hg2+ ions, and redox transformations. Notably, we find a framework that supports thiol-nitrosothiol interconversion, which is applicable for biocompatible nitric oxide delivery. The modularity, ease of synthesis, functionality, and well-defined nature of these peptide-based thiol frameworks are expected to accelerate the design of complex materials with reactive active sites.

Spatially Confined Silver Nanoparticles in Mercapto Metal-Organic Frameworks to Compartmentalize Li Deposition Toward Anode-Free Lithium Metal Batteries

As the promising next-generation energy storage solution, lithium metal battery (LMB) has gained great attention but still suffers from troubles associated with the highly active metallic lithium. Herein, it is aimed to develop an anode-free LMB engaging no Li disk or foil by modifying the Cu current collector with mercapto metal-organic frameworks (MOFs) impregnating Ag nanoparticles (NPs). While the polar mercapto groups facilitate and guide Li+ transport, the highly lithiophilic Ag NPs help to enhance the electric conductivity and lower the energy barrier of Li nucleation. Furthermore, the MOF pores allow compartmentalizing bulk Li into a 3D matrix Li storage so that not only the local current density is reduced, but also is the plating/stripping reversibility greatly enhanced. As a result, full cells pairing the prelithiated Ag@Zr-DMBD/Cu anodes with LiFePO4 cathodes demonstrate a high initial specific capacity of 159.8 mAh g-1 , first-cycle Coulombic efficiency of 96.6%, and long-term cycling stability over 1000 cycles with 99.3% capacity retention at 1 C. This study underlines the multi-aspect functionalization of MOFs to impart lithiophilicity, polarity, and porosity to achieve reversible Li plating/stripping and paves the way for realizing high-performance anode-free LMBs through exquisite modification of the Cu current collector.

Rational design of selective functionalized silica adsorbents for Hg(II) removal from FGD wastewater. A combined experimental and theoretical study

The binding of Hg2+ by mercaptan-functionalized silica possessing different physical characteristics was explored through experimental investigations and theoretical calculations. The impacts of the pore structure of silica adsorbents on functionalization and the kinetics of Hg2+ adsorption were also studied. The mechanism of Hg2+ adsorption was proposed based on the results of experimental and theoretical studies. The DFT calculations suggested a simultaneous monodentate and bidentate Hg2+ complex formation on sulfur-containing surface functional groups that strongly depends on the Hg2+ concentration. Theoretical Hg2+ adsorption isotherms predicted by DFT calculations have shown that even when the adsorbent surface had heterogeneous adsorption sites capable of simultaneous monodentate and bidentate complexation, the adsorption still followed the Langmuir model.

Functional molecule-mediated assembled copper nanozymes for diabetic wound healing

BACKGROUND

The complex hyperglycemic, hypoxic, and reactive oxygen species microenvironment of diabetic wound leads to vascular defects and bacterial growth and current treatment options are relatively limited by their poor efficacy.

RESULTS

Herein, a functional molecule-mediated copper ions co-assembled strategy was constructed for collaborative treatment of diabetic wounds. Firstly, a functional small molecule 2,5-dimercaptoterephthalic acid (DCA) which has symmetrical carboxyl and sulfhydryl structure, was selected for the first time to assisted co-assembly of copper ions to produce multifunctional nanozymes (Cu-DCA NZs). Secondly, the Cu-DCA NZs have excellent multicatalytic activity, and photothermal response under 808 nm irradiation. In vitro and in vivo experiments showed that it not only could efficiently inhibit bacterial growth though photothermal therapy, but also could catalyze the conversion of intracellular hydrogen peroxide to oxygen which relieves wound hypoxia and improving inflammatory accumulation. More importantly, the slow release of copper ions could accelerate cellular proliferation, migration and angiogenesis, synergistically promote the healing of diabetic wound furtherly.

CONCLUSIONS

The above results indicate that this multifunctional nanozymes Cu-DCA NZs may be a potential nanotherapeutic strategy for diabetic wound healing.

Recent progress in high-performance environmental impacts of the removal of radionuclides from wastewater based on metal-organic frameworks: a review

The nuclear industry is rapidly developing and the effective management of nuclear waste and monitoring the nuclear fuel cycle are crucial. The presence of various radionuclides such as uranium (U), europium (Eu), technetium (Tc), iodine (I), thorium (Th), cesium (Cs), and strontium (Sr) in the environment is a major concern, and the development of materials with high adsorption capacity and selectivity is essential for their effective removal. Metal-organic frameworks (MOFs) have recently emerged as promising materials for removing radioactive elements from water resources due to their unique properties such as tunable pore size, high surface area, and chemical structure. This review provides an extensive analysis of the potential of MOFs as adsorbents for purifying various radionuclides rather than using different techniques such as precipitation, filtration, ion exchange, electrolysis, solvent extraction, and flotation. This review discusses various MOF fabrication methods, focusing on minimizing environmental impacts when using organic solvents and solvent-free methods, and covers the mechanism of MOF adsorption towards radionuclides, including macroscopic and microscopic views. It also examines the effectiveness of MOFs in removing radionuclides from wastewater, their behavior on exposure to high radiation, and their renewability and reusability. We conclude by emphasizing the need for further research to optimize the performance of MOFs and expand their use in real-world applications. Overall, this review provides valuable insights into the potential of MOFs as efficient and durable materials for removing radioactive elements from water resources, addressing a critical issue in the nuclear industry.

Acetate exchange mechanism on a Zr12 oxo hydroxo cluster: relevance for reshaping Zr-carboxylate coordination adaptable networks

The kinetics and mechanism of the acetate ligand exchange with free acetic acid in [Zr6O4(OH)4(O2CCH3)12]2, used as a molecular model of crosslink migration in [Zr6O4(OH)4(carboxylate)12-n(OH)n]-based coordination adaptable networks with vitrimer-like properties, has been thoroughly investigated by dynamic 1H NMR and DFT calculations. The compound maintains its C2h-symmetric Zr12 structure in CD2Cl2 and C6D6, while it splits into its Zr6 subunits in CD3OD and D2O. In the Zr12 structure, the topologically different acetates (3 chelating, 6 belt-bridging, 2 intercluster-bridging and 1 inner-face-bridging) of the Zr6 subunits behave differently in the presence of free CH3COOH: very fast exchange for the chelating (coalesced resonance at room temperature), slower exchange for the belt-bridging (line broadening upon warming), no observable exchange up to 65 °C (by EXSY NMR) for the intercluster- and inner-face-bridging. The rates of the first two exchange processes have zero-order dependence on [CH3COOH]. Variable-temperature line broadening studies yielded ΔH‡ = 15.0 ± 0.4 kcal mol-1, ΔS‡ = 8 ± 1 cal mol-1 K-1 (-30 to +25 °C range in CD2Cl2) for the chelating acetates and ΔH‡ = 22.7 ± 1.6, 22.9 ± 2.1 and 20.6 ± 1.0 kcal mol-1 and ΔS‡ = 13 ± 5, 14 ± 6 and 9 ± 3 cal mol-1 K-1, respectively (+25 to +70 °C range in C6D6), for three distinct resonances of magnetically inequivalent belt-bridging acetates. With support of DFT calculations, these results point to an operationally associative mechanism involving a rate-determining partial dissociation to monodentate acetate, followed by rapid acid coordination and proton transfer. The cluster μ3-OH ligands accelerate the exchange processes through H-bonding stabilization of the coordinatively unsaturated intermediate. The lower exchange barrier for the chelated vs. bridging acetates is associated to the release of ring strain. The results presented in this investigation may help the interpretation of carboxylate exchange phenomena in other systems and the design of new carboxylate-based materials.

Functional MOF-Based Materials for Environmental and Biomedical Applications: A Critical Review

Over the last ten years, there has been a growing interest in metal-organic frameworks (MOFs), which are a unique category of porous materials that combine organic and inorganic components. MOFs have garnered significant attention due to their highly favorable characteristics, such as environmentally friendly nature, enhanced surface area and pore volume, hierarchical arrangements, and adjustable properties, as well as their versatile applications in fields such as chemical engineering, materials science, and the environmental and biomedical sectors. This article centers on examining the advancements in using MOFs for environmental remediation purposes. Additionally, it discusses the latest developments in employing MOFs as potential tools for disease diagnosis and drug delivery across various ailments, including cancer, diabetes, neurological disorders, and ocular diseases. Firstly, a concise overview of MOF evolution and the synthetic techniques employed for creating MOFs are provided, presenting their advantages and limitations. Subsequently, the challenges, potential avenues, and perspectives for future advancements in the utilization of MOFs in the respective application domains are addressed. Lastly, a comprehensive comparison of the materials presently employed in these applications is conducted.

MOF-Assisted Annealing-Free Crystallization Technology of Perovskites toward Efficient and Stable Perovskite Solar Cells

Although annealing is a commonly used crystallization method for perovskite films in perovskite solar cells (PSCs), the high thermal energy consumption and limitations on flexible devices hinder their further industrial application. We herein propose an annealing-free crystallization technology for perovskite films, assisted by the Zr-metal-organic framework (MOF) interface between SnO₂ and the perovskite. It is found that the Zr-MOF interface can accelerate the formation of perovskite intermediates and promote their conversion into perovskite crystals even without annealing. The trap density thus decreases by about one fold, accompanied by significant increases in electron and hole mobilities, resulting in enhanced carrier extraction and suppressed charge recombination. Therefore, the Zr-MOF-based PSC attains a power convention efficiency (PCE) of 20.24%, 2.2 times that (9.26%) of the pristine PSC. Furthermore, the Zr-MOF interface layer can significantly improve the air and thermal stabilities of PSCs. The Zr-MOF-based PSC exhibits 93% of its initial PCE versus 52% for the pristine PSC after 1018 h of storage in air. Additionally, after 360 h of continuous heating at 65 °C, the Zr-MOF-based PSC retains 91% of its initial PCE against 44% for the pristine PSC.

A PdPt nanoparticle-decorated thiol-functionalized MOF with high peroxidase-like activity for colorimetric sensing of D-glucose and chlorophenol isomers

The peroxidase (POD)-like catalytic activity of various nanozymes was extensively applied in many significant fields. In this study, a thiol-functionalized MOF-loaded PdPt nanocomposite (UiO-66-(SH)₂@PdPt) was fabricated, which possesses superior and selective POD-like activity with strong affinity towards H₂O₂ and 3,3',5,5'-tetramethylbenzidine under mild conditions. The POD-like property of UiO-66-(SH)₂@PdPt was used to sensitively detect the concentration of D-glucose under near-neutral (pH = 6.5) conditions. The detection limit of D-glucose was as low as 2.7 μM, and the linear range of D-glucose was 5-700 μM. In addition, UiO-66-(SH)₂@PdPt could accelerate the oxidative coupling chromogenic reaction of chlorophenol (CP) and 4-aminoantipyrine (4-AAP) in the presence of H₂O₂. Based on this phenomenon, a simple and visualized sensing array for the identification of chlorophenol contaminant isomers was further constructed to finally achieve the effective differentiation of three monochlorophenol isomers and six dichlorophenol isomers. Furthermore, a colorimetric detection method for 2-chlorophenol and 2,4-dichlorophenol was established. This work provides an effective means to improve the catalytic activity and selectivity of nanozymes by introducing an ideal carrier, which will be of significant value for the design of efficient nanozymes.

Molecular Engineering of Metal-Organic Frameworks as Efficient Electrochemical Catalysts for Water Oxidation

Metal-organic framework (MOF) solids with their variable functionalities are relevant for energy conversion technologies. However, the development of electroactive and stable MOFs for electrocatalysis still faces challenges. Here, a molecularly engineered MOF system featuring a 2D coordination network based on mercaptan-metal links (e.g., nickel, as for Ni(DMBD)-MOF) is designed. The crystal structure is solved from microcrystals by a continuous-rotation electron diffraction (cRED) technique. Computational results indicate a metallic electronic structure of Ni(DMBD)-MOF due to the Ni-S coordination, highlighting the effective design of the thiol ligand for enhancing electroconductivity. Additionally, both experimental and theoretical studies indicate that (DMBD)-MOF offers advantages in the electrocatalytic oxygen evolution reaction (OER) over non-thiol (e.g., 1,4-benzene dicarboxylic acid) analog (BDC)-MOF, because it poses fewer energy barriers during the rate-limiting *O intermediate formation step. Iron-substituted NiFe(DMBD)-MOF achieves a current density of 100 mA cm^-2 at a small overpotential of 280 mV, indicating a new MOF platform for efficient OER catalysis.

Crystal growth of RHO-type zeolitic imidazolate framework in aqueous phase

Here we report the synthesis of a zeolitic imidazolate framework with RHO topology (RHO-Zn(eim)₂; eim is the deprotonated anion of 2-ethylimidazole (Heim)) in the aqueous phase. Zn(eim)₂ crystals were prepared by the reaction between Heim and zinc acetate in deionized water. The products prepared at relatively high Heim/Zn molar ratios were Zn(eim)₂ whose structure assigned to RHO, qtz and ANA topologies. Zn(eim)₂ obtained under static condition had porous RHO structure, while under stirred condition, nonporous dense qtz and ANA structures were formed. This study revealed that the formation of RHO porous structure requires the template effect of excess Heim. The RHO-Zn(eim)₂ crystals possessed high surface area and micropore volume, whose morphology consisted of a rhombic dodecahedron. RHO-Zn(eim)₂ exhibited high adsorption capacity (4 mmol/g) for hexane and cyclohexane. Due to the hydrophobic nature of RHO-Zn(eim)₂, water vapor was hardly adsorbed. Although RHO-Zn(eim)₂ was stable in the presence of water vapor, it became nonporous upon hydrolysis in aqueous solution. In contrast, partial carbonization of topmost surface improved the structural stability against hydrolysis by water, while maintaining the adsorption capacity and increasing the adsorption rate.

Efficient and selective removal of Hg(II) from water using recyclable hierarchical MoS2/Fe3O4 nanocomposites

Developing practical and cost-effective adsorbents with satisfactory mercury (Hg) remediation capability is indispensable for aquatic environment safety and public health. Herein, a recyclable hierarchical MoS₂/Fe₃O₄ nanocomposite (by in-situ growth of MoS₂ nanosheets on the surface of Fe₃O₄ nanospheres) is presented for the selective removal of Hg(II) from aquatic samples. It exhibited high adsorption capacity (∼1923.5 mg g ^-1), fast kinetics (k₂ ∼ 0.56 mg g ^-1 min^-1), broad working pH range (2-11), excellent selectivity (K_d > 1.0 × 10⁷ mL g ^-1), and great reusability (removal efficiency > 90% after 20 cycles). In particular, removal efficiencies of up to ∼97% for different Hg(II) concentrations (10-1000 μg L ^-1) in natural water and industrial effluents confirmed the practicability of MoS₂/Fe₃O₄. The possible mechanism for effective Hg(II) removal was discussed by a series of characterization analyses, which was attributed to the alteration of the MoS₂ structure and the surface coordination of Hg-S. The accessibility of surface sulfur sites and the diffusion of Hg(II) in the solid-liquid system were enhanced due to the advantage of the expanded interlayer spacing (0.96 nm) and the hierarchical structure. This study suggests that MoS₂/Fe₃O₄ is a promising material for Hg(II) removal in actual scenarios and provides a feasible approach by rationally constructing hierarchical structures to promote the practical applications of MoS₂ in sustainable water treatments.

Why can poorly conductive Bi@UiO-MOF catalyze CO2 electroreduction?

Metal NP @ metal-organic frameworks (MOFs) are widely used in electrocatalysis. However, many of the MOFs are poorly conductive. Here, we loaded bismuth (Bi) into a Zr-based MOF of the UiO structure that is active for CO₂ reduction to formate and found that a moderate conductivity of the nanosized MOFs is sufficient to support a reasonably high catalytic current density. This finding allows simpler catalyst design and quantitative rationalization of MOF electrocatalysis.

Highly Efficient Capture of Heavy Metal Ions on Amine-Functionalized Porous Polymer Gels

Porous polymer gels (PPGs) are characterized by inherent porosity, a predictable structure, and tunable functionality, which makes them promising for the heavy metal ion trap in environmental remediation. However, their real-world application is obstructed by the balance between performance and economy in material preparation. Development of an efficient and cost-effective approach to produce PPGs with task-specific functionality remains a significant challenge. Here, a two-step strategy to fabricate amine-enriched PPGs, NUT-21-TETA (NUT means Nanjing Tech University, TETA indicates triethylenetetramine), is reported for the first time. The NUT-21-TETA was synthesized through a simple nucleophilic substitution using two readily available and low-cost monomers, mesitylene and α, α′-dichloro-p-xylene, followed by the successful post-synthetic amine functionalization. The obtained NUT-21-TETA demonstrates an extremely high Pb2+ capacity from aqueous solution. The maximum Pb2+ capacity, qm, assessed by the Langmuir model was as high as 1211 mg/g, which is much higher than most benchmark adsorbents including ZIF-8 (1120 mg/g), FGO (842 mg/g), 732-CR resin (397 mg/g), Zeolite 13X (541 mg/g), and AC (58 mg/g). The NUT-21-TETA can be regenerated easily and recycled five times without a noticeable decrease of adsorption capacity. The excellent Pb2+ uptake and perfect reusability, in combination with a low synthesis cost, gives the NUT-21-TETA a strong potential for heavy metal ion removal.

Utilizing Metal-Thiocatecholate Functionalized UiO-66 Framework for Photocatalytic Hydrogen Evolution Reaction

Exploiting clean energy is essential for sustainable development and sunlight-driven photocatalytic water splitting represents one of the most promising approaches toward this goal. Metal-organic frameworks (MOFs) are competent photocatalysts owing to their tailorable functionality, well-defined structure, and high porosity. Yet, the introduction of the unambiguous metal-centered active site into MOFs is still challenging since framework motifs capable of anchoring metal ions firmly are lacking. Herein, the assembly using 1,4-dicarboxylbenzene-2,3-dithiol (H₂ dcbdt) and Zr-Oxo clusters to give a thiol-functionalized UiO-66 type framework, UiO-66-dcbdt, is reported. The thiocatechols on the struts are allowed to capture transition metal (TM) ions to generate UiO-66-dcbdt-M (M  = Fe, Ni, Cu) with unambiguous metal-thiocatecholate moieties for photocatalytic hydrogen evolution reaction (HER). UiO-66-dcbdt-Cu is found the best catalyst exhibiting an HER rate of 4.18 mmol g^-1  h^-1  upon irradiation with photosensitizing Ru-polypyridyl complex. To skip the use of the external sensitizer, UiO-66-dcbdt-Cu is heterojunctioned with titanium dioxide (TiO₂ ) and achieves an HER rate of 12.63 mmol g^-1  h^-1  (32.3 times that of primitive TiO₂ ). This work represents the first example of MOF assembly employing H₂ dcbdt as the mere linker followed by chelation with TM ions and undoubtedly fuels the rational design of MOF photocatalysts bearing well-defined active sites.

Systematic Thiol Decoration in a Redox-Active UiO-66-(SH)2 Metal-Organic Framework: A Case Study under Oxidative and Reductive Conditions

The practical applicability of thiolated metal-organic frameworks (MOFs) remains challenging due to their low crystallinity and transient stability. Herein, we present a one-pot solvothermal synthesis process using varying ratios of 2,5-dimercaptoterephthalic acid (DMBD) and 1,4-benzene dicarboxylic acid (100/0, 75/25, 50/50, 25/75, and 0/100) to prepare stable mixed-linker UiO-66-(SH)₂ MOFs (ML-U66SX). For each variant, the effects of different linker ratios on the crystallinity, defectiveness, porosity, and particle size have been discussed in detail. In addition, the impact of modulator concentration on these features has also been described. The stability of ML-U66SX MOFs was investigated under reductive and oxidative chemical conditions. The mixed-linker MOFs were used as sacrificial catalyst supports to highlight the interplay of template stability on the rate of the gold-catalyzed 4-nitrophenol hydrogenation reaction. The release of catalytically active gold nanoclusters originating from the framework collapse decreased with the controlled DMBD proportion, resulting in a 59% drop in the normalized rate constants (9.11-3.73 s^-1 mg^-1). In addition, post-synthetic oxidation (PSO) was used to further probe the stability of the mixed-linker thiol MOFs under harsh oxidative conditions. Following oxidation, the UiO-66-(SH)₂ MOF underwent immediate structural breakdown, unlike other mixed-linker variants. Along with crystallinity, the microporous surface area of the post-synthetically oxidized UiO-66-(SH)₂ MOF could be increased from 0 to 739 m² g^-1. Thus, the present study delineates a mixed-linker strategy to stabilize the UiO-66-(SH)₂ MOF under harsh chemical conditions through meticulous thiol decoration.

Metal organic frameworks derived functional materials for energy and environment related sustainable applications

With the vigorous development of industrial economy, energy and environmental problems have become the most serious issues affecting people's production and life. Therefore, the demand for clean energy production, effective separation and storage is growing. Metal-organic frameworks (MOFs), as a kind of porous crystalline materials with large surface area and porosity, which is self-assembled by metal ions or clusters and organic ligands through coordination bonds. Thanks to a number of unique characteristics such as adjustable pore environment, homogeneous void structure, abundant active sites, unprecedented chemical composition tunability and functional versatility, it has been widely studied, especially for the clean energy conversion in catalysis. In this review, we focus on the research progress of clean energy in catalysis based on MOFs. Emphasis is placed on MOFs with different structures of compositions and their applications in catalytic for clean energy conversion, such as CO oxidation, CO₂ reduction and H₂ evolution. In addition, the situation of MOFs assisting environmental remediation is also briefly described. Finally, the prospects and challenges of MOFs in clean energy and the remaining issues in this field are presented.

Recent advancements in engineered biopolymeric-nanohybrids: A greener approach for adsorptive-remediation of noxious metals from aqueous matrices

Industrial wastewater is causing serious health problems due to presence of large concentrations of toxic metals. Removal of these metals is still a big challenge using pristine natural biopolymers due to their low surface area, water solubility, and poor recovery. Developing biopolymeric composites with other materials has attained attention because they possess a high surface area and structural porosity, high reactivity, and less water solubility. In simple words, biopolymeric nanohybrids have great adsorption capacity for heavy metals. Biopolymeric materials are abundant, low cost, biodegradable, and possess different functional moieties (carboxyl, amine, hydroxyl, and carbonyl) which play a vital role to adsorb metal ions through various inter-linkages (i.e., electrostatic, hydrogen bonding, ion exchange, chelation, etc.). Biopolymeric nanohybrids have been proven a potent tool in environmental remediation such as the abatement of heavy metal ions from polluted water. Herein, we have reported the adsorption potential of various biopolymers (cellulose, chitosan, pectin, gelatin, and silk proteins) for the removal of heavy metals. This review discusses the suitability of biopolymeric nanohybrids as an adsorbent for heavy metals, their synthesis, modification, adsorption potential, and adsorption mechanism along with best fitted thermodynamic and kinetic models. The influence of pH, contact time, and adsorbent dose on adsorption potential has also been discussed in detail. Lastly, the challenges, research gaps and recommendations have been presented. This review concludes that biopolymers in combination with other materials such as metal-based nanoparticles, clay, and carbon-based materials are excellent materials to remove metallic ions from wastewater. Significant adsorption of heavy metals was obtained at a moderate pH (5-6). Contact time and adsorbent dose also affect the adsorption of heavy metals in certain ways. The Pseudo-first order model fits the data for the initial period of the first step of the reaction. Kinetic studies of different adsorption processes of various biopolymeric nanohybrids described that for majority of bionanohybrids, Pseudo-second order fitted the experimental data very well. Functionalized biopolymeric nanohybrids being biodegradable, environment friendly, cost-effective materials have great potential to adsorb heavy metal ions. These may be the future materials for environmental remediation.

Highly efficient Hg2+ removal via a competitive strategy using a Co-based metal organic framework ZIF-67

The stronger coordination ability of mercury ions with organic ligands than the metal ions in metal organic framework (MOFs) provides an accessible way to separate mercury ions from solution using specific MOFs. In this study, a Co-based MOF (ZIF-67, Co(mIM)₂) was synthesized. It did not introduce specific functional groups, such as -SH and -NH₂, into its structure through complicated steps. It separate Hg²⁺ from wastewater with a new strategy, which utilized the stronger coordination ability of Hg²⁺ with the nitrogen atom on the imidazole ring of the organic ligand than the Co²⁺ ions. Hg²⁺ replaced Co²⁺ nodes from ZIF-67 and formed a more stable precipitate with mIM. The experimental results showed that this new strategy was efficient. ZIF-67 exhibited Hg²⁺ adsorption capacity of 1740 mg/g, much higher than the known MOFs sorbents. mIMs is the reaction center and ZIF-67 can improve its utilization. The sample color faded from purple to white due to the loss of cobalt ion. It is a great feature of ZIF-67 that allows users to judge whether the sorbent is deactivated intuitively. ZIF-67 can be sustainable recycled by adding organic ligands to the solution after treatment due to its simple synthesis method at room temperature. It's a high-efficient and sustainable sorbent for Hg²⁺ separation from wastewater.

Exploring the Defect Sites in UiO-66 by Decorating Platinum Nanoparticles for an Efficient Hydrogen Evolution Reaction

UiO-66 has been tailored using defect engineering methodology to introduce thiol functionalities into the MOF skeletal structure. The thiolated UiO-66 serves as a scaffold to support the platinum nanoparticles with a size of ∼2 nm through a soft-soft interaction. This Pt@UiO-66-SH, utilized as an HER catalyst, exhibited an overpotential of 57 mV at a current density of 10 mA cm^-2 in an acidic medium with a Tafel slope of 75 mV/dec and a high TOF value (389.37 s^-1). This catalyst showed long-term durability for 30 h, specifying the potential of the material to produce neat hydrogen.

Tunable 2D Hybrid Perovskites with Pd(II) Adsorption and Semiconducting Properties

Layered hybrid perovskites, due to their broad application potential in optical, electrical, and luminescence fields, are attracting increasing attention. Herein, we report two novel two-dimensional hybrid organic-inorganic perovskites [C₅H₁₀N₂S]PbBr₄ (1) and [C₅H₁₀N₂S]PbI₄ (2) ([C₅H₁₀N₂S]²⁺ is 3-ethylaminothiazolium), which possess phase transition and semiconductor properties. Intriguingly, 1 has semiconductor properties with an optical band gap of 2.70 eV and a photocurrent to dark current ratio of 50 for the photoresponse. By varying the halogen, the band gap of 2 is significantly reduced to 2.06 eV and the photocurrent to dark current ratio of the photoresponse reaches 10⁴. Moreover, compounds 1 and 2 are able to adsorb Pd(II) resulting from the presence of -SH groups in the cation. The adsorption of Pd(II) can turn a semiconductor into an insulator, weaken the fluorescence intensity, and cause the phase transition behavior to disappear. This work has remarkable implications for the continuous development of hybrid perovskites with phase transitions, metal adsorption, and semiconductor properties.

Thiol-Containing Metal-Organic Framework-Decorated Carbon Cloth as an Integrated Interlayer-Current Collector for Enhanced Li-S Batteries

Lithium-sulfur (Li-S) batteries hold great promise for new-generation energy storage technologies owing to their overwhelming energy density. However, the poor conductivity of active sulfur and the shuttle effect limit their widespread use. Herein, a carbon cloth decorated with thiol-containing UiO-66 nanoparticles (CC@UiO-66(SH)₂) was developed to substitute the traditional interlayer and current collector for Li-S batteries. One side of CC@UiO-66(SH)₂ acts as a current collector to load active materials, while the other side serves as an interlayer to further restrain polysulfide shuttling. This two-in-one integrated architecture endows the sulfur cathode with fast electron/ion transport and efficient chemical confinement of polysulfides. More importantly, rich thiol groups in the pores of UiO-66(SH)₂ serve to tether polysulfides by both covalent interactions and lithium bonding. Therefore, the Li-S battery equipped with this integrated interlayer-current collector not only delivers an enhanced specific capability (1209 mAh g^-1 at 0.1 C) but also exhibits prominent cycling stability (an attenuation rate of 0.037% per cycle for 1000 cycles at 1 C). Meanwhile, the battery achieves a high discharge capacity of 795 mAh g^-1 at a sulfur loading of 3.83 mg cm^-2. The new metal-organic framework (MOF)-based electrode material reported in this study undoubtedly provides insights into the exploration of functional MOFs for robust Li-S batteries.

Controlled Selectivity through Reversible Inhibition of the Catalyst: Stereodivergent Semihydrogenation of Alkynes

Catalytic semihydrogenation of internal alkynes using H₂ is an attractive atom-economical route to various alkenes, and its stereocontrol has received widespread attention, both in homogeneous and heterogeneous catalyses. Herein, a novel strategy is introduced, whereby a poisoning catalytic thiol is employed as a reversible inhibitor of a ruthenium catalyst, resulting in a controllable H₂-based semihydrogenation of internal alkynes. Both (E)- and (Z)-alkenes were obtained efficiently and highly selectively, under very mild conditions, using a single homogeneous acridine-based ruthenium pincer catalyst. Mechanistic studies indicate that the (Z)-alkene is the reaction intermediate leading to the (E)-alkene and that the addition of a catalytic amount of bidentate thiol impedes the Z/E isomerization step by forming stable ruthenium thiol(ate) complexes, while still allowing the main hydrogenation reaction to proceed. Thus, the absence or presence of catalytic thiol controls the stereoselectivity of this alkyne semihydrogenation, affording either the (E)-isomer as the final product or halting the reaction at the (Z)-intermediate. The developed system, which is also applied to the controllable isomerization of a terminal alkene, demonstrates how metal catalysis with switchable selectivity can be achieved by reversible inhibition of the catalyst with a simple auxiliary additive.

Covalent Organic Frameworks-Based Membranes as Promising Modalities from Preparation to Separation Applications: An Overview

Covalent organic frameworks (COFs) are a promising class of porous crystalline materials made up of covalently connected and periodically protracted network topologies through organic linkers. The tailorability of organic linker and intrinsic structures endow COFs with a tunable porosity and structure, low density, facilely-tailored functionality, and large surface area, attracting increasing amount of interests in variety of research areas of membrane separations. COF-based membranes have spawned a slew of new research projects, ranging from fabrication methodologies to separation applications. Herein, we tried to emphasis the major developments in the synthetic approaches of COFs based membranes for a variety of separation applications such as, separation of gaseous mixtures, water treatment as well as separation of isomeric and chiral organic compounds. The proposed methods for fabricating COF-based continuous membranes and columns for real world applications are also thoroughly explored. Finally, a viewpoint on the future directions and remaining challenges for COF research in the area of separation is provided.

Adsorption of iodine in metal-organic framework materials

Nuclear power will continue to provide energy for the foreseeable future, but it can pose significant challenges in terms of the disposal of waste and potential release of untreated radioactive substances. Iodine is a volatile product from uranium fission and is particularly problematic due to its solubility. Different isotopes of iodine present different issues for people and the environment. 129I has an extremely long half-life of 1.57 × 107 years and poses a long-term environmental risk due to bioaccumulation. In contrast, 131I has a shorter half-life of 8.02 days and poses a significant risk to human health. There is, therefore, an urgent need to develop secure, efficient and economic stores to capture and sequester ionic and neutral iodine residues. Metal-organic framework (MOF) materials are a new generation of solid sorbents that have wide potential applicability for gas adsorption and substrate binding, and recently there is emerging research on their use for the selective adsorptive removal of iodine. Herein, we review the state-of-the-art performance of MOFs for iodine adsorption and their host-guest chemistry. Various aspects are discussed, including establishing structure-property relationships between the functionality of the MOF host and iodine binding. The techniques and methodologies used for the characterisation of iodine adsorption and of iodine-loaded MOFs are also discussed together with strategies for designing new MOFs that show improved performance for iodine adsorption.

Dehydrated UiO-66(SH)2 : The Zr-O Cluster and Its Photocatalytic Role Mimicking the Biological Nitrogen Fixation

This work reports the dehydrated Zr-based MOF UiO-66(SH)₂ as a visible-light-driven photocatalyst to mimic the biological N₂ fixation process. The ¹⁵ N₂ and other control experiments demonstrated that the new photocatalyst is highly efficient in converting N₂ to ammonia. In-situ TGA, XPS, and EXAFS as well as first-principles simulations were used to demonstrate the role of the thermal treatment and the changes of the local structures around Zr due to the dehydration. It was shown that the dehydration opened a gate for the entry of N₂ molecules into the [Zr₆ O₆ ] cluster where the strong N≡N bond was broken stepwise by μ-N-Zr type interactions driven by the photoelectrons aided by the protonation. This mechanism was discussed in comparison with the Lowe-Thorneley mechanism proposed for the MoFe nitrogenase, and with emphasis on the [Zr₆ O₆ ] cluster effect and the leading role of photoelectrons over the protonation. The results shed new light on understanding the catalytic mechanism of biological N₂ fixation and open a new way to fix N₂ under mild conditions.