Catalytic CO2 Activation Assisted by Rhenium Hydride/B(C6F5)3 Frustrated Lewis Pairs—Metal Hydrides Functioning as FLP Bases

Homogeneous and Heterogeneous Frustrated Lewis Pairs for the Activation and Transformation of CO2

Due to the serious ecological problems caused by the high CO2 content in the atmosphere, reducing atmospheric CO2 has attracted widespread attention from academia and governments. Among the many ways to mitigate CO2 concentration, the capture and comprehensive utilization of CO2 through chemical methods have obvious advantages, whose key is to develop suitable adsorbents and catalysts. Frustrated Lewis pairs (FLPs) are known to bind CO2 through the interaction between unquenched Lewis acid sites/Lewis base sites with the O/C of CO2, simultaneously achieving CO2 capture and activation, which render FLP better potential for CO2 utilization. However, how to construct efficient FLP targeted for CO2 utilization and the mechanism of CO2 activation have not been systematically reported. This review firstly provides a comprehensive summary of the recent advances in the field of CO2 capture, activation, and transformation with the help of FLP, including the construction of homogeneous and heterogeneous FLPs, their interaction with CO2, reaction activity, and mechanism study. We also illustrated the challenges and opportunities faced in this field to shed light on the prospective research.

Donor-Acceptor Activation of Carbon Dioxide

The activation and functionalization of carbon dioxide entails great interest related to its abundance, low toxicity and associated environmental problems. However, the inertness of CO2 has posed a challenge towards its efficient conversion to added-value products. In this review we discuss one of the strategies that have been widely used to capture and activate carbon dioxide, namely the use of donor-acceptor interactions by partnering a Lewis acidic and a Lewis basic fragment. This type of CO2 activation resembles that found in metalloenzymes, whose outstanding performance in catalytically transforming carbon dioxide encourages further bioinspired research. We have divided this review into three general sections based on the nature of the active sites: metal-free examples (mainly formed by frustrated Lewis pairs), main group-transition metal combinations, and transition metal heterobimetallic complexes. Overall, we discuss one hundred compounds that cooperatively activate carbon dioxide by donor-acceptor interactions, revealing a wide range of structural motifs.

PNP-type ligands enabled copper-catalyzed N-formylation of amines with CO2 in the presence of silanes

The sustainable catalytic transformation of carbon dioxide into valuable fine chemicals with high efficiency is a global challenge as although CO₂ is an abundant, nontoxic, and sustainable carbon feedstock it is also the most important factor behind the Greenhouse Effect. We describe herein a PNP-type ligand-enabled copper-catalyzed N-formylation of amines utilizing CO₂ as the building block in the presence of hydrosilane as the reductant. Our current protocol featured newly synthesized PNP-type ligands with broad substrate scope under mild reaction conditions.

Mechanism Insights into the Iridium(III)- and B(C6F5)3-Catalyzed Reduction of CO2 to the Formaldehyde Level with Tertiary Silanes

The catalytic system [Ir(CF3CO2)(κ2-NSiMe)2] [1; NSiMe = (4-methylpyridin-2-yloxy)dimethylsilyl]/B(C6F5)3 promotes the selective reduction of CO2 with tertiary silanes to the corresponding bis(silyl)acetal. Stoichiometric and catalytic studies evidenced that species [Ir(CF3COO-B(C6F5)3)(κ2-NSiMe)2] (3), [Ir(κ2-NSiMe)2][HB(C6F5)3] (4), and [Ir(HCOO-B(C6F5)3)(κ2-NSiMe)2] (5) are intermediates of the catalytic process. The structure of 3 has been determined by X-ray diffraction methods. Theoretical calculations show that the rate-limiting step for the 1/B(C6F5)3-catalyzed hydrosilylation of CO2 to bis(silyl)acetal is a boron-promoted Si-H bond cleavage via an iridium silylacetal borane adduct.

Challenges and Prospects in the Catalytic Conversion of Carbon Dioxide to Formaldehyde

Formaldehyde (HCHO) is a crucial C₁ building block for daily-life commodities in a wide range of industrial processes. Industrial production of HCHO today is based on energy- and cost-intensive gas-phase catalytic oxidation of methanol, which calls for exploring other and more sustainable ways of carrying out this process. Utilization of carbon dioxide (CO₂ ) as precursor presents a promising strategy to simultaneously mitigate the carbon footprint and alleviate environmental issues. This Minireview summarizes recent progress in CO₂ -to-HCHO conversion using hydrogenation, hydroboration/hydrosilylation as well as photochemical, electrochemical, photoelectrochemical, and enzymatic approaches. The active species, reaction intermediates, and mechanistic pathways are discussed to deepen the understanding of HCHO selectivity issues. Finally, shortcomings and prospects of the various strategies for sustainable reduction of CO₂ to HCHO are discussed.

Molybdenum(VI) Bis(imido) Complexes: From Frustrated Lewis Pairs to Weakly Coordinating Cations

Molybdenum(VI) bis(imido) complexes [Mo(NtBu)₂ (L^R )₂ ] (R=H 1 a; R=CF₃ 1 b) combined with B(C₆ F₅ )₃ (1 a/B(C₆ F₅ )₃ , 1 b/B(C₆ F₅ )₃ ) exhibit a frustrated Lewis pair (FLP) character that can heterolytically split H-H, Si-H and O-H bonds. Cleavage of H₂ and Et₃ SiH affords ion pairs [Mo(NtBu)(NHtBu)(L^R )₂ ][HB(C₆ F₅ )₃ ] (R=H 2 a; R=CF₃ 2 b) composed of a Mo(VI) amido imido cation and a hydridoborate anion, while reaction with H₂ O leads to [Mo(NtBu)(NHtBu)(L^R )₂ ][(HO)B(C₆ F₅ )₃ ] (R=H 3 a; R=CF₃ 3 b). Ion pairs 2 a and 2 b are catalysts for the hydrosilylation of aldehydes with triethylsilane, with 2 b being more active than 2 a. Mechanistic elucidation revealed insertion of the aldehyde into the B-H bond of [HB(C₆ F₅ )₃ ]^- . We were able to isolate and fully characterize, including by single-crystal X-ray diffraction analysis, the inserted products Mo(NtBu)(NHtBu)(L^R )₂ ][{PhCH₂ O}B(C₆ F₅ )₃ ] (R=H 4 a; R=CF₃ 4 b). Catalysis occurs at [HB(C₆ F₅ )₃ ]^- while [Mo(NtBu)(NHtBu)(L^R )₂ ]⁺ (R=H or CF₃ ) act as the cationic counterions. However, the striking difference in reactivity gives ample evidence that molybdenum cations behave as weakly coordinating cations (WCC).

Divergent CO2 Activation by Tuning the Lewis Acid in Iron-Based Bimetallic Systems

Bimetallic motifs mediate the selective activation and functionalization of CO₂ in metalloenzymes and some recent synthetic systems. In this work, we build on the nascent concept of bimetallic frustrated Lewis pairs (FLPs) to investigate the activation and reduction of CO₂ . Using the Fe⁰ fragment [(depe)₂ Fe] (depe=1,2-bis(diethylphosphino)ethane) as base, we modify the nature of the partner Lewis acid to accomplish a divergent and highly chemoselective reactivity towards CO₂ . [Au(PMe₂ Ar)]⁺ irreversibly dissociates CO₂ , Zn(C₆ F₅ )₂ and B(C₆ F₅ )₃ yield different CO₂ adducts stabilized by push-pull interactions, while Al(C₆ F₅ )₃ leads to a rare heterobimetallic C-O bond cleavage, and thus to contrasting reduced products after exposure to dihydrogen. Computational investigations provide a rationale for the divergent reactivity, while Energy Decomposition Analysis-Natural Orbital for Chemical Valence (EDA-NOCV) method substantiates the heterobimetallic bonding situation.

Use of 5,10-Disubstituted Dibenzoazaborines and Dibenzophosphaborines as Cyclic Supports of Frustrated Lewis Pairs for the Capture of CO2

The reactivity of 5,10-disubstituted dibenzoazaborines and dibenzophosphaborines towards carbon dioxide was studied at the DFT, M06-2X/def2-TZVP, computational level. The profile of this reaction comprises of three stationary points: the pre-reactive complex and adduct minima and the transition state(TS) linking both minima. Initial results show that dibenzoazaborines derivatives are less suitable to form adducts with CO₂ than dibenzophosphaborine systems. The influence of the basicity on the P atom and the acidity on the B center of the dibenzophosphaborine in the reaction with CO₂ was also explored. Thus, an equation was developed relating the properties (acidity, basicity and boron hybridization) of the isolated dibenzophosphaborine derivatives with the adduct energy. We found that modulation of the boron acidity allows to obtain more stable adducts than the pre-reactive complexes and isolated monomers.

Distinct Reactivity Modes of a Copper Hydride Enabled by an Intramolecular Lewis Acid

We disclose a 1,4,7-triazacyclononane (TACN) ligand featuring an appended boron Lewis acid. Metalation with Cu(I) affords a series of tetrahedral complexes including a boron-capped cuprous hydride. We demonstrate distinct reactivity modes as a function of chemical oxidation: hydride transfer to CO2 in the copper(I) state and oxidant-induced H2 evolution as well as alkyne reduction.

Theoretical Study of the Activation Reaction of a Zr+/P-Based Frustrated Lewis Pair with Carbon Dioxide

The combination reactions of carbon dioxide with a Zr⁺/P-based frustrated Lewis pair (FLP) were computationally explored within the density functional theory framework [B3LYP-D3(BJ)/def2-TZVP]. Results showed that these reactions are exothermic, associated with relatively low activation barriers, and proceed concertedly involving Zr⁺-O and P-C chemical bond formations. Theoretical analysis revealed that the shorter the Zr⁺···P bond length of the Zr⁺/P-based FLP, the shorter the stretching O-C bond length of CO₂ upon reaction, the larger the ∠OCO bending angle of CO₂, the smaller the deformation energy of CO₂, the lower the barrier height, and the greater the reactivity between the Zr⁺/P-based FLP and CO₂. According to the energy decomposition analysis-natural orbitals for chemical valence, the bonding natures of their associated transition states are determined by the singlet-singlet interaction (donor-acceptor interaction), not the triplet-triplet interaction (electron-sharing interaction). Moreover, the bonding characteristics between Zr⁺/P-based FLPs and CO₂ are established predominantly by the lone pair orbital(P) → the empty p-π* orbital (CO₂) interaction, not the empty d-orbital(Zr⁺) ← the filled p-π orbital (CO₂) interaction. With the use of the activation strain model, theoretical examinations showed that the reactivity trend of such combination reactions is mainly attributed to the deformation energies of the deformed reactants. The relationship between deformed geometrical structures and related activation energies is in good agreement with Hammond's postulate.

Activation of H-H, HO-H, C(sp2)-H, C(sp3)-H, and RO-H Bonds by Transition-Metal Frustrated Lewis Pairs Based on M/N (M = Rh, Ir) Couples

Reaction of the dimers [(Cp*MCl)₂(μ-Cl)₂] (Cp* = η⁵-C₅Me₅) with Ph₂PCH₂CH₂NC(NH(p-Tolyl))₂ (H₂L) in the presence of NaSbF₆ affords the chlorido complexes [Cp*MCl(κ²N,P-H₂L)][SbF₆] (M = Rh, 1; Ir, 2). Upon treatment with aqueous NaOH, solutions of 1 and 2 yield the corresponding complexes [Cp*M(κ³N,N′,P-HL)][SbF₆] (M = Rh, 3; Ir, 4) in which the ligand HL presents a fac κ³N,N′,P coordination mode. Treatment of THF solutions of complexes 3 and 4 with hydrogen gas, at room temperature, results in the formation of the metal hydrido-complexes [Cp*MH(κ²N,P-H₂L)][SbF₆] (M = Rh, 5; Ir, 6) in which the N(p-Tolyl) group has been protonated. Complexes 3 and 4 react with deuterated water in a reversible fashion resulting in the gradual deuteration of the Cp* group. Heating at 383 K THF/H₂O solutions of the complexes 3 and 4 affords the orthometalated complexes [Cp*M(κ³C,N,P-H₂L_-H)][SbF₆] [M = Rh, 7; Ir, 8, H₂L_-H = Ph₂PCH₂CH₂NC(NH(p-Tolyl))(NH(4-C₆H₃Me))], respectively. At 333 K, complexes 3 and 4 react in THF with methanol, primary alcohols, or 2-propanol giving the metal-hydrido complexes 5 and 6, respectively. The reaction involves the acceptorless dehydrogenation of the alcohols at a relatively low temperature, without the assistance of an external base. The new complexes have been characterized by the usual analytical and spectroscopic methods including the X-ray diffraction determination of the crystal structures of complexes 1–5, 7, and 8. Notably, the chlorido complexes 1 and 2 crystallize both as enantiopure conglomerates and as racemates. Reaction mechanisms are proposed based on stoichiometric reactions, nuclear magnetic resonance studies, and X-ray crystallography as well as density functional theory calculations.

In solution, masked transition-metal frustrated Lewis pairs (TMFLPs) give rise to the corresponding TMFLP species which activate dihydrogen, water, and alcohols following FLP reaction pathways. When D₂O or alcohols with deuterated OH groups were employed, H/D exchange at the Cp* ligand (involving C(sp³)−H activation) was observed. C(sp²)−H bond activation involving orthometalation of the p-Tolyl ring was also observed.

Activation of Si-H and B-H bonds by Lewis acidic transition metals and p-block elements: same, but different

In this Perspective we discuss the ability of transition metal complexes to activate and cleave the Si-H and B-H bonds of hydrosilanes and hydroboranes (tri- and tetra-coordinated) in an electrophilic manner, avoiding the need for the metal centre to undergo two-electron processes (oxidative addition/reductive elimination). A formal polarization of E-H bonds (E = Si, B) upon their coordination to the metal centre to form σ-EH complexes (with coordination modes η1 or η2) favors this type of bond activation that can lead to reactivities involving the formation of transient silylium and borenium/boronium cations similar to those proposed in silylation and borylation processes catalysed by boron and aluminium Lewis acids. We compare the reactivity of transition metal complexes and boron/aluminium Lewis acids through a series of catalytic reactions in which pieces of evidence suggest mechanisms involving electrophilic reaction pathways.

Frustrated Lewis Pairs in Heterogeneous Catalysis: Theoretical Insights

Frustrated Lewis pair (FLP) catalysts have attracted much recent interest because of their exceptional ability to activate small molecules in homogeneous catalysis. In the past ten years, this unique catalysis concept has been extended to heterogeneous catalysis, with much success. Herein, we review the recent theoretical advances in understanding FLP-based heterogeneous catalysis in several applications, including metal oxides, functionalized surfaces, and two-dimensional materials. A better understanding of the details of the catalytic mechanism can help in the experimental design of novel heterogeneous FLP catalysts.

Catalytic reduction of carbon dioxide by a zinc hydride compound, [Tptm]ZnH, and conversion to the methanol level

The zinc hydride compound, [Tptm]ZnH, may achieve the reduction of CO₂ by (RO)₃SiH (R = Me, Et) to the methanol oxidation level, (MeO)_xSi(OR)_4-x, via the formate species, HCO₂Si(OR)₃. However, because insertion of CO₂ into the Zn-H bond is more facile than insertion of HCO₂Si(OR)₃, conversion of HCO₂Si(OR)₃ to the methanol level only occurs to a significant extent in the absence of CO₂.

Ultrafast charge transfer dynamics in 2D covalent organic frameworks/Re-complex hybrid photocatalyst

Rhenium(I)-carbonyl-diimine complexes have emerged as promising photocatalysts for carbon dioxide reduction with covalent organic frameworks recognized as perfect sensitizers and scaffold support. Such Re complexes/covalent organic frameworks hybrid catalysts have demonstrated high carbon dioxide reduction activities but with strong excitation energy-dependence. In this paper, we rationalize this behavior by the excitation energy-dependent pathways of internal photo-induced charge transfer studied via transient optical spectroscopies and time-dependent density-functional theory calculation. Under band-edge excitation, the excited electrons are quickly injected from covalent organic frameworks moiety into catalytic Rhenium^I center within picosecond but followed by fast backward geminate recombination. While under excitation with high-energy photon, the injected electrons are located at high-energy levels in Rhenium^I centers with longer lifetime. Besides those injected electrons to Rhenium^I center, there still remain some long-lived electrons in covalent organic frameworks moiety which is transferred back from Rhenium^I. This facilitates the two-electron reaction of carbon dioxide conversion to carbon monoxide.

Re complexes within covalent organic frameworks have emerged as promising photocatalysts for CO₂ reduction. Here, authors identify a high-energy electron transfer pathway during CO₂ reduction that results in longer-lived excited states than a low-energy electron transfer pathway.

The reaction of rhenium nitrosyl with a sterically hindered NHC-carbene

In this article, we present the serendipitous synthesis of the unknown Re(I) complex [(OPPh3)Re(NO)2Cl3] (3) that we obtained reacting the Re(V) complex trans-[(PPh3)2ReOCl3] (1) with NO gas in presence of CH3COOH. We found that 3 reacts with 1,3-bis (2,4,6-trimethylphenyl)-1,3-dihydro-2H-imidazol-2-ylidene (IMes) to yield a stable oximate-Re(III) complex [(OPPh3)Re(NO)(ONIMes)Cl3] (4). We speculate that the IMes reacts with a bent NO, because the DFT calculations excluded the formation of both dimeric and η2-NO complexes in solution. The reactivity of the NO toward the carbene is probably due to an internal fluxional process in which the NO passes from linear to bent, triggered by the π-electrons given by the three chlorides to the Re through the mesomeric effect.

Schematic Design of Metal-Free NHC-Mediated Sequestering and Complete Conversion of SO2 to Thiocarbonyl S-Oxide Derivatives at Room Temperature

The sequestering and complete conversion of SO₂ to valuable chemicals in a metal-free pathway is highly demanded. The recent success of SO₂ fixation by N-heterocyclic carbenes instigated further studies in this regard. Previous reports were confined within the carbene-SO₂ reaction mechanism and the stability of oxathiirane S-oxide derivatives. The complete conversion of captured SO₂ to precious chemicals was not studied. The present inquisition has accomplished the scarcity of the earlier studies. It is observed that in the presence of an excess amount of carbene, the registered SO₂ is converted to the ketone derivative and thiocarbonyl S-oxide derivative. An electronic level investigation of these reactions is carried out. From the change of the molecular orbitals along the reaction path, it is concluded that the reaction between the oxathiirane S-oxide derivative and carbene follows a frog's hunting mechanism.

Rational Design of Main Group Metal-Embedded Nitrogen-Doped Carbon Materials as Frustrated Lewis Pair Catalysts for CO2 Hydrogenation to Formic Acid

Developing efficient and inexpensive main group catalysts for CO₂ conversion and utilization has attracted increasing attention, as the conversion process would be both economical and environmentally benign. Here, based on the main group element Al, we designed several heterogeneous frustrated Lewis acid/base pair (FLP) catalysts and performed extensive first-principles calculations for the hydrogenation of CO₂. These catalysts, including Al@N-Gr-1, Al@N-Gr-2, and Al@C₂N, are composed of a single Al atom and two-dimensional (2D) N-doped carbon-based materials to form frustrated Al/C or Al/N Lewis acid/base pairs, which are all predicted to have high reactivity to absorb and activate hydrogen (H₂). Compared with Al@N-Gr-1, both Al@N-Gr-2 and Al@C₂N, especially Al@N-Gr-2, containing Al/N Lewis pairs exhibit better catalytic activity for CO₂ hydrogenation with lower activation energies. CO₂ hydrogenation on the three catalysts prefers to go through a three-step mechanism, i.e., the heterolytic dissociation of H₂, followed by the transfer of the hydride near Al to CO₂, and finally the activation of a second H₂ molecule. Other IIIA group element (B and Ga)-embedded N-Gr-2 materials (B@N-Gr-2 and Ga@N-Gr-2) were also explored and compared. Both Al@N-Gr-2 and Ga@N-Gr-2 show higher catalytic activity for CO₂ hydrogenation to HCOOH than B@N-Gr-2. However, the CO₂ hydrogenation path on Ga@N-Gr-2 tends to follow a two-step mechanism, including H₂ dissociation and subsequent hydrogen transfer. The present study provides a potential solution for CO₂ hydrogenation by designing novel and effective FLP catalysts based on main group elements.

Diverse Uses of the Reaction of Frustrated Lewis Pair (FLP) with Hydrogen

The articulation of the notion of "frustrated Lewis pairs" (FLPs) emerged from the discovery that H₂ can be reversibly activated by combinations of sterically encumbered main group Lewis acids and bases. This has prompted numerous studies focused on various perturbations of the Lewis acid/base combinations and the applications to organic reductions. This Perspective focuses on the new directions and developments that are emerging from this FLP chemistry involving hydrogen. Three areas are discussed including new applications and approaches to FLP reductions, the reductions of small molecules, and the advances in heterogeneous FLP systems. These foci serve to illustrate that despite having its roots in main group chemistry, this simple concept of FLPs is being applied across the discipline.

Catalytic Reductive Alcohol Etherifications with Carbonyl-Based Compounds or CO2 and Related Transformations for the Synthesis of Ether Derivatives

Ether derivatives have myriad applications in several areas of chemical industry and academia. Hence, the development of more effective and sustainable protocols for their production is highly desired. Among the different methodologies reported for ether synthesis, catalytic reductive alcohol etherifications with carbonyl-based moieties (aldehydes/ketones and carboxylic acid derivatives) have emerged in the last years as a potential tool. These processes constitute appealing routes for the selective production of both symmetrical and asymmetrical ethers (including O-heterocycles) with an increased molecular complexity. Likewise, ester-to-ether catalytic reductions and hydrogenative alcohol etherifications with CO2 to dialkoxymethanes and other acetals, albeit in less extent, have undergone important advances, too. In this Review, an update of the recent progresses in the area of catalytic reductive alcohol etherifications using carbonyl-based compounds and CO2 have been described with a special focus on organic synthetic applications and catalyst design. Complementarily, recent progress made in catalytic acetal/ketal-to-ether or ester-to-ether reductions and other related transformations have been also summarized.

Sequestration of Carbon Dioxide with Frustrated Lewis Pairs Based on N-Heterocycles with Silane/Germane Groups

Frustrated Lewis pairs (FLPs) based on nitrogen heterocycles (pyridine, pyrazole, and imidazole) with a silane or germane group in the α-position of a nitrogen atom have been considered as potential molecules to sequestrate carbon dioxide. Three stationary points have been characterized in the reaction profile: a pre-reactive complex, an adduct minimum, and the transition state connecting them. The effect of external (solvent) or internal (hydroxyl group) electric fields in the reaction profile has been considered. In both cases, it is possible to improve the kinetics and thermodynamics of the complexation of CO2 by the FLP and favor the formation of adducts.

Energy Decomposition Analysis of Lewis Acid/Base Adducts and Frustrated Lewis Pairs: The Use of EOrb/ESteric Ratios as a Reaction Parameter

The nature of bonding in classical adducts and frustrated Lewis pairs (FLPs) of oxorhenium and nitridorhenium complexes with B(C₆F₅)₃ was investigated computationally (B3PW91-D3). These studies have revealed that the primary noncovalent interaction (NCI) in the FLPs involves lone pair/π interactions between the terminal M≡X bond and the aromatic C₆F₅ ring in B(C₆F₅)₃. Energy decomposition analyses on classical adducts and FLPs reveal that these species can be defined by the ratio (E_Orb/E_Steric) of covalent-to-noncovalent contributions to the total interaction energy, E_Int. This type of analysis reveals that values for FLPs exist in a narrow range (1.2-2.5), with values for adducts significantly outside this range. The application of this method to other main-group combinations of Lewis acids and bases that have been shown to exhibit FLP reactivity yields similar results. These data suggest that similar NCIs are present in both transition-metal and main-group FLPs, especially where Lewis acids such as B(C₆F₅)₃ are utilized.

Copper(I) Complexes Containing PCP Ligand Catalyzed Hydrogenation of Carbon Dioxide to Formate under Ambient Conditions

The five new copper(I) complexes [Cu₂(μ-Cl)₂(κ¹-PCP^t-Bu)] (1), [Cu₂(μ-Br)₂(κ¹-PCP^t-Bu)] (2), [Cu₂(μ-I)₂(κ¹-PCP^t-Bu)] (3), [Cu₂(μ-CN)₂(κ¹-PCP^t-Bu)] (4), and [Cu₄(μ₃-SCN)₄(κ¹-PCP^t-Bu)₂]·CH₂Cl₂ (5) bearing a 1,3-bis[(di-tert-butylphosphino)methyl]benzene ligand were synthesized and characterized spectroscopically, and the molecular structures of 1, 3, and 5 were determined by single-crystal X-ray diffraction techniques. Structural studies for 1 and 3 revealed their binuclear structures with Cu···Cu separations of 2.609(3) and 2.6359(19) Å, respectively. However, 5 has a tetranuclear cubane structure with an 18-electron configuration at each copper without any metal-metal bonds. The two copper centers in 1 and 3 are bonded to one bridging PCP^t-Bu ligand in a κ¹-manner and two bridging (pseudo)halido ligands in a μ₂-bonding mode to generate a nonplanar Cu₂(μ-X)₂ framework. The four copper centers in 5 are at the vertices of a tetrahedron. Each copper center has pseudo-tetrahedral coordination provided by two bridging PCP^t-Bu ligands in a κ¹-manner and the four bridging thiocyanate groups in a μ₃-manner. These complexes were used as catalysts for the hydrogenation of CO₂ to formate in the presence of DBU as a base to produce valuable energy-rich chemicals, and therefore it is a promising, safe, and simple strategy to conduct reactions under ambient pressure at room temperature. Among all of the five copper(I) complex based catalysts, 3 displayed the best catalytic performance with turnover number (TON) values of 38-8700 in 12-48 h of reaction at 25-80 °C. The outstanding catalytic performance of [Cu₂(μ-I)₂(κ¹-PCP^t-Bu)] (3) makes it a potential candidate for realizing the large-scale production of formate by CO₂ hydrogenation.

More Than Just a Reagent: The Rise of Renewable Organohydrides for Catalytic Reduction of Carbon Dioxide

Stoichiometric carbon dioxide reduction to highly reduced C1 molecules, such as formic acid (2e^- ), formaldehyde (4e^- ), methanol (6e^- ) or even most-reduced methane (8e^- ), has been successfully achieved by using organosilanes, organoboranes, and frustrated Lewis Pairs (FLPs) in the presence of suitable catalyst. The development of renewable organohydride compounds could be the best alternative in this regard as they have shown promise for the transfer of hydride directly to CO₂ . Reduction of CO₂ by two electrons and two protons to afford formic acid by using renewable organohydride molecules has recently been investigated by various groups. However, catalytic CO₂ reduction to ≥2e^- -reduced products by using renewable organohydride-based molecules has rarely been explored. This Minireview summarizes important findings in this regard, encompassing both stoichiometric and catalytic CO₂ reduction.

Hydrosilyation of CO2 using a silatrane hydride: structural characterization of a silyl formate compound

The silatrane hydride compound, [N(CH2CH2O)3]SiH, reacts with CO2 in the presence of the [tris(2-pyridylthio)methyl]zinc hydride complex, [Tptm]ZnH, to afford the silyl formate and methoxide derivatives, [N(CH2CH2O)3]SiO2CH and [N(CH2CH2O)3]SiOCH3. The molecular structure of [N(CH2CH2O)3]SiO2CH has been determined by X-ray diffraction, thereby demonstrating that the formate ligand adopts a distal conformation in which the uncoordinated oxygen atom resides with a trans-like disposition relative to silicon. Density functional theory calculations indicate that the atrane motif of [N(CH2CH2O)3]SiO2CH is flexible, such that the energy of the molecule changes relatively little as the Si···N distance varies over the range 2.0–3.0 Å.

Partnering a Three-Coordinate Gallium Cation with a Hydroborate Counter-Ion for the Catalytic Hydrosilylation of CO2

A novel β-diketiminate stabilized gallium hydride, (^Dipp L)Ga(Ad)H (where (^Dipp L)={HC(MeCDippN)₂ }, Dipp=2,6-diisopropylphenyl and Ad=1-adamantyl), has been synthesized and shown to undergo insertion of carbon dioxide into the Ga-H bond under mild conditions. In this case, treatment of the resulting κ¹ -formate complex with triethylsilane does not lead to regeneration of the hydride precursor. However, when combined with B(C₆ F₅ )₃ , (^Dipp L)Ga(Ad)H catalyses the reductive hydrosilylation of CO₂ . Under stoichiometric conditions, the addition of one equivalent of B(C₆ F₅ )₃ to (^Dipp L)Ga(Ad)H leads to the formation of a 3-coordinate cationic gallane complex, partnered with a hydroborate anion, [(^Dipp L)Ga(Ad)][HB(C₆ F₅ )₃ ]. This complex rapidly hydrometallates carbon dioxide and catalyses the selective reduction of CO₂ to the formaldehyde oxidation level at 60 °C in the presence of Et₃ SiH (yielding H₂ C(OSiEt₃ )₂ ). When catalysis is undertaken in the presence of excess B(C₆ F₅ )₃ , appreciable enhancement of activity is observed, with a corresponding reduction in selectivity: the product distribution includes H₂ C(OSiEt₃ )₂ , CH₄ and O(SiEt₃ )₂ . While this system represents proof-of-concept in CO₂ hydrosilylation by a gallium hydride system, the TOF values obtained are relatively modest (max. 10 h^-1 ). This is attributed to the strength of binding of the formatoborate anion to the gallium centre in the catalytic intermediate (^Dipp L)Ga(Ad){OC(H)OB(C₆ F₅ )₃ }, and the correspondingly slow rate of the turnover-limiting hydrosilylation step. In turn, this strength of binding can be related to the relatively high Lewis acidity measured for the [(^Dipp L)Ga(Ad)]⁺ cation (AN=69.8).

What Fluorine Can Do in CO2 Chemistry: Applications from Homogeneous to Heterogeneous Systems

CO₂ chemistry including capture and fixation has attracted great attention towards the aim of reducing the consumption of fossil fuels and CO₂ accumulation in the atmosphere. "CO₂ -philic" materials are required to achieve good performance owing to the intrinsic properties of the CO₂ molecule, that is, thermodynamic stability and kinetic inertness. In this respect, fluorinated materials have been deployed in CO₂ capture (physical and chemical pathway) or fixation (thermo- and electrocatalytic procedure) with good performances, including homogeneous (e. g., ionic liquids and small organic molecules) and heterogeneous counterparts (e. g., carbons, porous organic polymers, covalent triazine frameworks, metal-organic frameworks, and membranes). In this Minireview, these works are summarized and analyzed from the aspects of (1) the strategy used for fluorine introduction, (2) characterization of the targeted materials, (3) performance of the fluorinated systems in CO₂ chemistry, and comparison with the nonfluorinated counterparts, (4) the role of fluorinated functionalities in the working procedure, and (5) the relationship between performance and structural/electronic properties of the materials. The systematic summary in this Minireview will open new opportunities in guiding the design of "CO₂ -philic" materials and pave the way to stimulate further progress in this field.

Tuning Activity and Selectivity during Alkyne Activation by Gold(I)/Platinum(0) Frustrated Lewis Pairs

Introducing transition metals into frustrated Lewis pair systems has attracted considerable attention in recent years. Here we report a selection of three metal-only frustrated systems based on Au(I)/Pt(0) combinations and their reactivity toward alkynes. We have inspected the activation of acetylene and phenylacetylene. The gold(I) fragments are stabilized by three bulky phosphines bearing terphenyl groups. We have observed that subtle modifications on the substituents of these ligands proved critical in controlling the regioselectivity of acetylene activation and the product distribution resulting from C(sp)-H cleavage of phenylacetylene. A mechanistic picture based on experimental observations and computational analysis is provided. As a result of the cooperative action of the two metals of the frustrated pairs, several uncommon heterobimetallic structures have been characterized.

Evidence for Genuine Bimetallic Frustrated Lewis Pair Activation of Dihydrogen with Gold(I)/Platinum(0) Systems

A joint experimental/computational effort to elucidate the mechanism of dihydrogen activation by a gold(I)/platinum(0) metal-only frustrated Lewis pair (FLP) is described herein. The drastic effects on H₂ activation derived from subtle ligand modifications have also been investigated. The importance of the balance between bimetallic adduct formation and complete frustration has been interrogated, providing for the first time evidence for genuine metal-only FLP reactivity in solution. The origin of a strong inverse kinetic isotopic effect has also been clarified, offering further support for the proposed bimetallic FLP-type cleavage of dihydrogen.

Triple Frustrated Lewis Pair-Type Reactivity on a Single Rare-Earth Metal Center

Rare-earth metal cations have been used rarely as Lewis-acidic components in the chemistry of frustrated Lewis pairs (FLPs). Herein, we report the first cerium/phosphorus system (2) employing a heptadentate N₄ P₃ ligand, which exhibits triple FLP-type reactivity towards a series of organic substrates, including isocyanates, isothiocyanates, diazomethane, and azides on a single rare-earth Lewis acidic Ce center. This result shows that the Ce center and three P atoms in 2 could simultaneously activate three equivalents of small molecules under mild conditions. This study broadens the diversity of FLPs and demonstrates that rare earth based FLP exhibit unique properties compared with other FLP systems.

A highly active copper catalyst for the hydrogenation of carbon dioxide to formate under ambient conditions

Carbon dioxide (CO2) is an important reactant and can be used for the syntheses of various types of industrially important chemicals. Hence, investigation concerning the conversion of CO2 into valuable energy-rich chemicals is an important and current topic in molecular catalysis. Recent research on molecular catalysts has led to improved rates for conversion of CO2 to energy-rich products such as formate, but the catalysts based on first-row transition metals are underdeveloped. Copper(i) complexes containing the 1,1'-bis(di-tert-butylphosphino) ferrocene ligand were found to promote the catalytic hydrogenation of CO2 to formate in the presence of DBU as the base, where the catalytic conversion of CO2via hydrogenation is achieved using in situ gaseous H2 (granulated tin metal and concentrated HCl) to produce valuable energy-rich chemicals, and therefore it is a promising, safe and simple strategy to conduct reactions under ambient pressure at room temperature. Towards this goal, we report an efficient copper(i) complex based catalyst [CuI(dtbpf)] to achieve ambient-pressure CO2 hydrogenation catalysis for generating the formate salt (HCO2-) with turnover number (TON) values of 326 to 1.065 × 105 in 12 to 48 h of reaction at 25 °C to 80 °C. The outstanding catalytic performance of [CuI(dtbpf)] makes it a potential candidate for realizing the large-scale production of formate by CO2 hydrogenation.

Tandem deoxygenative hydrosilation of carbon dioxide with a cationic scandium hydridoborate and B(C6F5)3

A scandium hydridoborate complex supported by the dianionic pentadentate ligand B₂Pz₄Py is prepared via hydride abstraction from the previously reported scandium hydride complex with tris-pentafluorophenyl borane.

Triazinetriamine-derived porous organic polymer-supported copper nanoparticles (Cu-NPs@TzTa-POP): an efficient catalyst for the synthesis of N-methylated products via CO2 fixation and primary carbamates from alcohols and urea

Copper nanoparticles incorporated triazinetriamine derived porous organic polymer based catalyst was synthesized for catalytic production N-methylated amines and primary carbamates.

Bis(alkyl) scandium and yttrium complexes coordinated by an amidopyridinate ligand: synthesis, characterization and catalytic performance in isoprene polymerization, hydroelementation and carbon dioxide hydrosilylation

Highly versatile and robust organolanthanides as catalysts or catalyst precursors for a variety of challenging transformations.