Tuning the Luminescence of Metal–Organic Frameworks for Detection of Energetic Heterocyclic Compounds

Unique Fluorescence of Aggregation-Induced Emission Luminogens on Solid Surfaces Modified by Silicone Nanofilaments

Aggregation-induced emission (AIE) has revolutionized solid-state fluorescence by overcoming the limitations of aggregation-caused quenching. While extensively studied in solutions, AIE's potential on solid surfaces remains largely unexplored, which can be fundamentally interesting and practically useful. In this work, we demonstrate the successful dispersion of tetraphenylethylene (TPE), one of the most classical AIE luminogens, on solid surfaces coated with silicone nanofilaments (SNF). The high surface area of SNF enables the uniform immobilization of TPE luminogens, replicating their dispersal behavior in solutions. Compared to unmodified surfaces, TPE dispersed on SNF-coated surfaces exhibits significantly enhanced fluorescence intensity. Moreover, a fascinating dynamic blue shift in TPE emission on SNF-coated surfaces is observed, with the velocity controllable by the surface group of SNF by up to 4 orders of magnitude, showing that TPE can be applied to the judgment of the nanoscale morphology and surface free energy of the solid surface. Owing to the superhydrophobicity and self-cleaning properties of SNF, the on-surface fluorescence can be sustained underwater and is resistant to dust contamination and rain erosion, with potential applications of information encryption presented. Our approach of uniformly dispersing AIE luminogens on nanomaterials with high surface areas provides a general methodology for creating on-surface fluorescence and saving the usage of expensive AIE luminogens in applications.

Homochiral Tetraphenylethene-Based Metal-Organic Frameworks with Circularly Polarized Luminescence for Enantioselective Recognition

A pair of water-stable and highly porous homochiral fluorescent silver-organic framework enantiomers, namely, R-Ag-BPA-TPyPE (R-1) and S-Ag-BPA-TPyPE (S-1), had been prepared as enantioselective fluorescence sensors. Combining homochiral 1,1'-binaphthyl-2,2'-diyl hydrogen phosphate (BPA) with an AIE-based ligand tetrakis[4-(pyridin-4-yl)phenyl]ethene (TPyPE) in complexes R-1 and S-1 made them possess favorable circularly polarized luminescence (CPL) properties, and their CPL spectra were almost mirror images of each other. The luminescence dissymmetry factors (glum) are ±2.2 × 10-3 for R-1 and S-1, and the absolute fluorescence quantum yields (ΦFs) are 32.0% for R-1 and S-1, respectively. Complex R-1 could enantioselectively recognize two enantiomers of amino acids in water or DMF with high Stern-Volmer constants of 236-573 M-1 and enantioselectivity ratios of 1.40-1.78.

1,3-diene-based AIEgens: Stereoselective synthesis and applications

In recent years, significant advancements have been made in the synthesis and application of 1,3-dienes. This specific structural motif has garnered significant attention from researchers in materials science and biology due to its unique aggregation-induced emission (AIE) properties and extensive conjugation systems. The luminescent characteristics of these compounds are notably influenced by the geometry of the two double bonds. Therefore, it is essential to consolidate stereoselective synthetic strategies for 1,3-dienes. This comprehensive review seeks to elucidate the diverse techniques employed to attain stereo-control in the synthesis of 1,3-diene-based AIE luminogens (AIEgens). Particular emphasis is placed on comprehending the determinants of stereoselectivity and exploring the array of substrates amenable to these methods. Furthermore, the review underscores the AIE properties exhibited by these compounds and their extensive utility in organic light-emitting diodes (OLEDs), stimuli-responsive materials, sensors, bioimaging, and photodynamic therapy (PDT).

High-pressure study of a 3d-4f heterometallic CuEu-organic skeleton

We prepared a 3d-4f heterobimetallic CuEu-organic framework NBU-8 with a density of 1921 kg m-3 belonging to the family of dense packing materials (dense metal-organic frameworks or MOFs). This MOF material was prepared from 4-(pyrimidin-5-yl)benzoic acid (HPBA) with a bifunctional ligand site as a tripodal ligand and Cu2+ and Eu3+ as the metal centres; the molecular formula is Cu3Eu2(PBA)6(NO3)6·H2O. This material is a very promising dimethylformamide (DMF) molecular chemical sensor. Systematic high-pressure studies of NBU-8 were carried out by powder X-ray diffraction, high-pressure X-ray diffraction and molecular dynamics simulation. The high-pressure experiment shows that the (006) diffraction peak of the crystal structure moves toward a low angle with increasing pressure, accompanied by the phenomenon that the d-spacing increases, and as the pressure increases, the (10-2) diffraction peak moves to a higher angle, the amplitude of the d-spacing is significantly reduced and finally merges with the (006) diffraction peak into one peak. The amplitude of the d-spacing is significantly reduced, indicating that NBU-8 compresses and deforms along the a-axis direction when subjected to uniform pressure. This is caused by tilting of the ligands to become more vertical along the c direction, leading to its expansion. This allows greater contraction along the a direction. We also carried out a Rietveld structure refinement and a Birch-Murnaghan solid-state equation fitting for the high-pressure experimental results. We calculated the bulk modulus of the material to be 45.68 GPa, which is consistent with the calculated results. The framework is among the most rigid MOFs reported to date, exceeding that of Cu-BTC. Molecular dynamics simulations estimated that the mechanical energy absorbed by the system when pressurized to 5.128 GPa was 249.261 kcal mol-1. The present work will provide fresh ideas for the study of mechanical energy in other materials.

Wood Cellulose Nanofibers Grafted with Poly(ε-caprolactone) Catalyzed by ZnEu-MOF for Functionalization and Surface Modification of PCL Films

Renewable cellulose nanofiber (CNF)-reinforced biodegradable polymers (such as polycaprolactone (PCL)) are used in agriculture, food packaging, and sustained drug release. However, the interfacial incompatibility between hydrophilic CNFs and hydrophobic PCL has limited further application as high-performance biomaterials. In this work, using a novel ZnEu-MOF as the catalyst, graft copolymers (GCL) with CNFs were grafted with poly(ε-caprolactone) (ε-CL) via homogeneous ring-opening polymerization (ROP), and used as strengthening/toughening nanofillers for PCL to fabricate light composite films (LCFs). The results showed that the ZnEu-MOF ([ZnEu(L)₂(HL)(H₂O)_0.39(CH₃OH)_0.61]·H₂O, H₂L is 5-(1H-imidazol-1-yl)-1,3-benzenedicarboxylic acids) was an efficient catalyst, with low toxicity, good stability, and fluorescence emissions, and the GCL could efficiently promote the dispersion of CNFs and improve the compatibility of the CNFs and PCL. Due to the synergistic effect of the ZnEu-MOF and CNFs, considerable improvements in the mechanical properties and high-intensity fluorescence were obtained in the LCFs. The 4 wt% GCL provided the LCF with the highest strength and elastic modulus, which increased by 247.75% and 109.94% compared to CNF/PCL, respectively, showing the best elongation at break of 917%, which was 33-fold higher than CNF/PCL. Therefore, the ZnEu-MOF represented a novel bifunctional material for ROP reactions and offered a promising modification strategy for preparing high-performance polymer composites for agriculture and biomedical applications.

Construction of Highly Thermostable and Insensitive Three-Dimensional Energetic Salts Based on [1,2,5]Oxadiazolo[3,4-d]pyrimidine

A novel method for accessing energetic salts of a fused-ring skeleton based on [1,2,5]oxadiazolo[3,4-d]pyrimidine and three alkali metals, sodium (Na), potassium (K), and cesium (Cs), was developed. All three compounds were fully characterized, and their structures were confirmed by single-crystal X-ray analysis. They were highly thermally stable (>290 °C) and had high density, good detonation properties, and insensitive properties, which suggested possible heat-resistant explosive applications.

A new three-dimensional zinc(II) metal-organic framework as a fluorescence sensor for sensing the biomarker 3-nitrotyrosine

3-Nitrotyrosine (3-NT), an oxidative stress biomarker, is closely associated with various diseases. Thus, rapid and sensitive detection of 3-NT is of great significance for preventing and treating diseases. Herein, we reported a new 3D zinc-based metal-organic framework (Zn-MOF) [Zn(L)(HBTC)] (L = (E)-4,4'-(ethene-1,2-diyl)bis[(N-pyridin-3-yl)benzamide], H₃BTC = 1,3,5-benzenetricarboxylic acid), which was structurally characterized by single crystal X-ray diffraction, IR, PXRD and TG. The Zn-MOF can be used as a highly efficient fluorescence sensing material to provide a direct and low-cost method for the rapid detection of 3-NT and shows high sensitivity with a K_SV value of 6.596 × 10⁴ M^-1, a rapid luminescence response within 24 s, excellent selectivity, high anti-interference ability and good recyclability. It is the first example of a MOF being used to directly detect 3-NT as a luminescence sensor to our knowledge. The sensing mechanism of the Zn-MOF towards 3-NT is discussed in detail, which provides a basis for the rational design of MOF sensing materials and their application in biomarker detection.

Smart Tetraphenylethene-Based Luminescent Metal-Organic Frameworks with Amide-Assisted Thermofluorochromics and Piezofluorochromics

Luminescent metal-organic frameworks (MOFs) are appealing for the design of smart responsive materials, whereas aggregation-induced emission (AIE) fluorophores with twisted molecular rotor structure provide exciting opportunities to construct MOFs with new topology and responsiveness. Herein, it is reported that elongating AIE rotor ligands can render the newly formed AIE MOF (ZnETTB) (ETTB = 4',4''',4''''',4'''''''-(ethene-1,1,2,2-tetrayl)tetrakis(([1,1'-biphenyl]-3,5-dicarboxylic acid))) with more elasticity, more control for intramolecular motion, and specific amide-sensing capability. ZnETTB shows specific host-guest interaction with amide, where N,N-diethylformamide (DEF), as an example, is anchored through CH···O and CH···π bonds with Zn cluster and ETTB^8- ligand, respectively. DEF anchoring reduces both the distortion level and the intramolecular motions of ETTB^8- ligand to lead a blueshifted and intensified emission for DEF ∈ ZnETTB. Moreover, amide anchoring also affords the DEF ∈ ZnETTB with the excellent thermofluorochromic behavior, and further increases the piezofluorochromic sensitivity at low-pressure ranges on the basis of its elastic framework. This work is one of the rare examples of amide-responsive smart materials, which shall shed new lights on design of smart MOFs with twisted AIE rotors for further sensing and detection applications.

Achieving gas pressure-dependent luminescence from an AIEgen-based metal-organic framework

Materials exhibiting aggregation-induced emission (AIE) behaviour enable strong emission in solid state and can respond to various external stimuli, which may facilitate the development of materials for optical sensing, bioimaging or optoelectronic devices. Herein, we use an AIE luminogen 2’,5’-diphenyl-[1,1’:4’,1”-terphenyl]-4,4”-dicarboxylic acid as the ligand to prepare an AIEgen-based MOF (metal-organic framework) named FJI-H31. FJI-H31 exhibits bright luminescence under ambient conditions (under air and at room temperature), but almost no emission is observed under vacuum. Our investigation shows that the emission intensity displays a smooth and reversible enhancement with increased gas pressure, which may be attributed to the restriction of intramolecular motion brought by structural deformation under pressure stimulus. Unlike most pressure-responsive MOFs, the luminescence reverts to its original state once gas pressure recovers. By virtue of its unique optical properties, a luminescent MOF with sensing ability of gas-pressure is realized.

Compounds displaying aggregation-induced emission behavior may have application in the preparation of smart materials. Here, the authors report a luminogen-containing metal-organic framework for which luminescence intensity changes are observed in response to gas pressure.

Recent Progress in Metal-Organic Framework Based Fluorescent Sensors for Hazardous Materials Detection

Population growth and industrial development have exacerbated environmental pollution of both land and aquatic environments with toxic and harmful materials. Luminescence-based chemical sensors crafted for specific hazardous substances operate on host-guest interactions, leading to the detection of target molecules down to the nanomolar range. Particularly, the luminescence-based sensors constructed on the basis of metal-organic frameworks (MOFs) are of increasing interest, as they can not only compensate for the shortcomings of traditional detection techniques, but also can provide more sensitive detection for analytes. Recent years have seen MOFs-based fluorescent sensors show outstanding advantages in the field of hazardous substance identification and detection. Here, we critically discuss the application of MOFs for the detection of a broad scope of hazardous substances, including hazardous gases, heavy metal ions, radioactive ions, antibiotics, pesticides, nitro-explosives, and some harmful solvents as well as luminous and sensing mechanisms of MOF-based fluorescent sensors. The outlook and several crucial issues of this area are also discussed, with the expectation that it may help arouse widespread attention on exploring fluorescent MOFs (LMOFs) in potential sensing applications.

Cobalt Metal-Organic Frameworks with Aggregation-Induced Emission Characteristics for Fluorometric/Colorimetric Dual Channel Detection of Nitrogen-Rich Heterocyclic Compounds

Nitrogen-rich heterocyclic compounds (NRHCs) are an emerging type of explosive, and their quantification is important in national security inspection and environmental monitoring. Up until now, designing an efficient NRHCs sensing strategy was still in the early stages. Herein, a new metal-organic framework (MOF) with aggregation-induced emission (AIE) characteristics is synthesized with fluorometric/colorimetric responses for rapid and selective detection of NRHCs. The nonemissive probe is designed with tetraphenylethylene derivative as the linker and Co as the node, quencher, and color-changing agent. Cobalt AIE-MOF exhibits a turn-on emission enhancement due to the competitive coordination substitution between NRHCs and the scaffold as well as the following AIE process of the liberative linkers. Meanwhile, the color appearance of the probe changes from blue to yellow based on the dissociation of the original Co coordinating system. Using this dual-mode probe, single- and dual-ring NRHCs are successfully detected from 5 μM to 7.5 mM within 25 s. The cobalt AIE-MOF exhibits excellent selectivity of NRHCs against a variety of interferences, providing a promising tool for designing a multichannel detection strategy.

A novel organometallic magnesium complexes with aggregation induced emission properties: synthesis, characterization, and fluorescent fibres applications

In this work, a novel organomagnesium complex with outstanding aggregation induced emission (AIE) properties was synthesized using dibenzoylmethane (DBM) as the ligand. The structure of the complex was confirmed to be one magnesium ion coordinated to the diones groups of two DBM molecules, and the magnesium ion adopted a distorted octahedrally geometry. The obvious emission was found for Mg(DBM) 2 powder and not in the solution, which was the first reported organomagnesium complex with AIE property. The properties of complexes were investigated by UV-vis absorption and fluorescence emission spectroscopy, cyclic voltammetry and density functional theory calculations. Moreover, the Mg(DBM) 2 solution dispersed in fifilter paper was nearly colorless, which could be made into a convenient anti-counterfeiting and encryption tool. Mg(DBM) 2 /alginate fibres were prepared by wet-spinning process and further processed into paper, which could be used in the fields of sensor, anti-counterfeiting and encryption. Sweat contains a wealth of chemical information that could potentially indicate the body's deeper biomolecular state. The prepared fluorescent fibres were used to detect sweat due to its non-toxic, low-cost efficient and fast response to analytes.

A historical review of aggregation‐induced emission from 2001 to 2020: A bibliometric analysis

Aggregation‐induced emission (AIE) is a photophysical phenomenon that a certain group of luminescent materials that become highly luminous when aggregated in a bad solvent or solid state. This year is the 20th anniversary since the AIE concept firstly proposed in 2001. Many advanced applications were gradually being explored, covering optics, electronics, energy, and bioscience and so on. At present, bibliometrics can enlighten the researchers with comprehensive sights of the achievements and trends of a specific field, which is critical for academic investigations. Herein, we presented a general bibliometric overview of AIE covering 20 years of evolution. With the assistance of Web of Science Core Collection database and several bibliometric software tools, the annual publication and citation, most influential countries/regions, most contributing authors, journals and institutions, second near‐infrared (NIR‐II) related hotspots, as well as the forecast of frontiers were demonstrated and systematically analyzed. This study summarizes the current research status in AIE research field and provides a reference for future research directions.

In situ ligand-induced Ln-MOFs based on a chromophore moiety: white light emission and turn-on detection of trace antibiotics

Series novel 3D Ln-MOFs containing both carboxyphenyl and pyridinyl moieties have been constructed. Tb-MOF fluorescence turn-on sensor of levofloxacin solution with highly sensitive and excellent selective was achieved through d-PET approach.

Luminescent Two-Dimensional Metal-Organic Framework Nanosheets with Large π-Conjugated System: Design, Synthesis, and Detection of Anti-Inflammatory Drugs and Pesticides

Two-dimensional (2D) metal-organic framework (MOF) nanosheets, with largely exposed surface area and highly accessible active sites, have emerged as a novel kind of sensing material. Here, a luminescent 2D MOF nanosheet was designed and synthesized by a facile top-down strategy based on a three-dimensional (3D) layered MOF {[Zn(H₂L)(H₂O)₂]·H₂O}_n (Zn-MOF; H₄L = 3,5-bis(3',5'-dicarboxyphenyl)-1H-1,2,4-triazole). With a large π-conjugated system and rigid planar structure, ligand H₄L was elaborately selected to construct the bulk Zn-MOF, which can be readily exfoliated into 2D nanosheets, owing to the weak interlayer interactions and easy-to-release H₂O molecules in the interspaces of 2D layers. Given the great threat posed to the ecological environment by anti-inflammatory drugs and pesticides, the developed luminescent Zn-MOF nanosheets were utilized to determine these organic pollutants, achieving highly selective and sensitive detection of diclofenac sodium (DCF) and tetramethylthiuram disulfide (TMTD). Compared to the detection limits of 3D Zn-MOF (7.72 ppm for DCF, 6.01 ppm for TMTD), the obviously lower detection limits for 2D Zn-MOF nanosheets toward DCF (0.20 ppm) and TMTD (0.18 ppm) further revealed that the largely exposed surface area with rigid planar structure and ultralarge π-conjugated system greatly accelerated electron transfer, which brought about a vast improvement in response sensitivity. The remarkable quenching performance for DCF and TMTD stems from a combined effect of photoinduced electron transfer and competitive energy absorption. The possible sensing mechanism was systematically investigated by the studies of powder X-ray diffraction, UV-vis, luminescence lifetime, and density functional theory calculations.

Flexible luminescent non-lanthanide metal-organic frameworks as small molecules sensors

Toxic, carcinogenic, and hazardous materials are omnipresent, generally obtained by anthropogenic activities, industrial activities, aerobic and anaerobic degradation of waste materials and are harmful to human health and environment. Thus, sensing, colorimetric detection, and subsequent inclusion of these chemicals are of prime importance for human health and environment. In comparison to other classes of highly porous materials, luminescent metal-organic frameworks (LMOFs) have chromophoric organic ligands, high surface area, high degree of tunability and structural diversity. They have received scientific interest as sensory materials for device fabrication to detect and sense toxic small molecules. Especially, as soft-porous materials exhibiting a degree of flexibility or dynamic behaviour, flexible LMOFs are promising for selective detection and sensing, and for encapsulation of toxic and health hazardous molecules. Such flexible LMOFs offer a potential platform for selective adsorption/separation, molecular recognition, and sensing application. In this perspective, we highlight the advantages of flexibility of LMOFs for selective detection and sensing, and inclusion of toxic small molecules (solvents, anions, halobenzenes, aromatics, aromatic amines, nitro-explosives and acetylacetone). In addition, the principles and strategies guiding the design of these MOF based materials and recent progress in the luminescent detection of toxic small molecules are also discussed. In this perspective we limit our discussion on the 'non-lanthanide' based luminescent MOFs that have flexibility in the framework and show small molecule sensing applications.

Tetraphenylethene Functionalized Polyhedral Oligomeric Silsesquioxane Fluorescent Probe for Rapid and Selective Trifluralin Sensing in Vegetables and Fruits

A novel fluorescent probe was designed and synthesized from tetraphenylethene (TPE) and polyhedral oligomeric silsesquioxanes (POSS) via Heck-palladium catalyzed cross-coupling reaction. The as-synthesized TPE functionalized probe performed good solvent stability and selectively preconcentration capability towards target analyte due to its stable structure and the adsorption property. The morphology as well as the physical and chemical properties of the POSS@TPE were carefully characterized. The POSS@TPE was employed to develop an effective fluorescent probe for trifluralin, with a response range of 0.1-80 mg/kg and a detection limit of 0.102 mg/kg. The mixed mechanisms of inner-filter effect (IFE) and photoinduced electron transfer (PET) explain the selectivity of POSS@TPE. Rapid detection for trifluralin in tomato and celery has been achieved with recoveries between 99.4-120.7% (RSD≤3.4%), and the results were verified compared with GC-MS method.

A New Kind of RIV-type AIEgens and Their Applications for the Construction of Multifunctional Luminescent MOFs

In this work, a new kind of butterfly-like molecules of oxacalix[2]arene[2]pyrazine (OAP) are reported, which exhibit typical characteristics of aggregation-induced emission (AIE) via the restriction of intramolecular vibration (RIV) mechanism. Unlike any of the reported RIV-type AIE molecules, the synthetic procedures of which are complicated and associated high costs, OAP AIEgens can be synthesized in a facile manner by a one-step catalyst-free reaction using commercially available materials. Notably, OAP AIEgens are ideal ligands for constructing metal-organic frameworks (MOFs) due to their built-in coordination sites of pyrazine groups. OAP-based MOFs exhibit multiple potential applications in reversible gas response, encrypted information storage, and construction of white light-emitting devices. This work enriches limited kinds of RIV-type AIEgens, offers additional selections of bridging ligands for constructing luminescent MOFs and provides a visualized prototype to understand the effect of RIV process on the luminescence property of MOFs.

Stereoselective Synthesis of Highly Substituted 1,3-Dienes via "à la carte" Multifunctionalization of Borylated Dendralenes

Despite the high relevance of 1,3-dienes, stereoselective methods to access tetrasubstituted conjugated dienes are still scarce. We here report an efficient and modular approach that provides access to multifunctional tetrasubstituted 1,3-dienes with excellent levels of regio- and stereoselectivity. This methodology is based on a tetracomponent reaction between a borylated dendralene, an organolithium reagent and two different electrophiles. Mechanistic studies reveal that this transformation proceeds through a regio- and stereoselective carbolithiation/electrophilic trapping of an in situ formed dendralenic boron-ate complex, followed by a stereoretentive halodeborylation. The ease in which complex structural dienes can be accessed and their synthetic versatility highlight the importance and utility of this method.

A Europium-Organic Framework Sensing Material for 2-Aminoacetophenone, a Bacterial Biomarker in Water

2-Aminoacetophenone (2-AA) is a metabolite produced in large quantities by the pathogenic bacteria Pseudomonas aeruginosa (PA), which is a biomarker for PA in water. State-of-the-art analytical techniques to detect PA usually require expensive instruments and a long analysis time which are not suitable for real-time water quality monitoring, especially for high-quality drinking water. Herein, we reported the application of a europium metal-organic framework (Eu-MOF) as a luminescent sensing material, which provides a facile, environmentally friendly and low-cost way for the fast detection of PA in water. Eu-MOF shows a high sensitivity toward 2-AA with a K_SV value of 3.563 × 10⁴ M^-1, rapid luminescence response in 12 s and high-selectivity and anti-interference ability with the existence of common detection indexes in drinking water owing to the good match of the energy levels of Eu-MOF and 2-AA. A systematical optimization of the sensing conditions to enhance the sensing function of Eu-MOF for 2-AA was discussed in detail, to give fundamentals for the rational design of MOF-based sensing materials.

Applications of MOFs as Luminescent Sensors for Environmental Pollutants

The environmental pollution has become a serious issue because the pollutants can cause permanent damage to the DNA, nervous system, and circulating system, resulting in various incurable diseases, such as organ failure, malformation, angiocardiopathy, and cancer. The effective detection of environmental pollutants is urgently needed to keep them far away from daily life. Among the reported pollutant sensors, luminescent metal-organic frameworks (LMOFs) with tunable structures have attracted remarkable attention to detect the pollutants because of their excellent selectivity, sensitivity, and recyclability. Although lots of metal-organic framework (MOF)-based luminescent sensors have been summarized and discussed in previous reviews, the detection of environmental pollutants, especially radioactive ions and heavy metal ions, still have not been systematically presented. Here, the sensing mechanisms and construction principles of luminescent MOFs are discussed, and the state-of-the-art MOF-based luminescent sensors of environmental pollutants, including pesticides, antibiotics, explosives, VOCs, toxic gas, toxic small molecules, radioactive ions, and heavy metal ions are highlighted. This comprehensive review may further guide the development of luminescent MOFs and promote their practical applications for sensing environmental pollutants.

Tuning the excited-state intramolecular proton transfer (ESIPT)-based luminescence of metal-organic frameworks by metal nodes toward versatile photoluminescent applications

Here, using three metal cations (Mg2+, Al3+, and Zr4+) and an excited-state intramolecular proton transfer (ESIPT) active linker, 2,5-dihydroxyterephthalic acid (H2DHT), three luminescent metal-organic frameworks (LMOFs) were obtained. Importantly, their ESIPT-based luminescence originated from the linker was systematically tuned in emission profiles including intensity, emission color, and quantum efficiency in the solution as well as in the solid state, which is largely dependent on the composition and structural characteristics of these three LMOFs. Similar to the free linker, the Mg-based MOF possesses a relatively strong luminescence, the Al-based MOF has moderate luminescence due to the breathing effect, and the Zr-based MOF is very weakly luminescent, mainly caused by the LMCT process. Benefiting from unique emission behaviors of these three LMOFs, we further modulated their ESIPT-based luminescence through the interplay between guest species and components of LMOFs by combining with various photophysical processes, and successfully explored their potential applications as versatile photoluminescent platforms for target-triggered sensory materials, responsive fluorescent hydrogels, and white-light-emitting phosphors.

Turn-On Fluorescence Enantioselective Sensing of Hydroxyl Carboxylic Enantiomers by Metal-Organic Framework Nanosheets with a Homochiral Tetracarboxylate of Cyclohexane Diamide

Two-dimensional (2D) metal-organic frameworks (MOFs) have attracted growing interest due to excellent performance in gas separation, energy conversion and storage, catalysis, and sensing, but their homochirality and exfoliation as well as related enantioselective catalysis and sensing remain a stage of pending exploration owing to the scarcity of homochiral MOFs and intrinsic aggregation of nanosheets. Herein, a homochiral 2D MOF (HMOF-3) with polymeric chirality, good thermostability, and solvent stability is designed and constructed by a homochiral organic ligand 5,5'-((1R,2R)-cyclohexane dicarbonyl bis(azanediyl)) diisophthalic acid (R,R-CHCAIP), a ditopic coligand 4,4'-bipyridine, and Zn salts. Remarkably, HMOF-3 can be exfoliated via solvent-assisted sonication to achieve 2D HMOF-3 nanosheets (HMOF-3-NS), which exhibit a sensitive turn-on effect with the fluorescence enhancement up to 63.5 times in the presence of R/S-mandelic acid, d/l-tartaric acid, d/l-lactic acid, d/l-alanine, and d/l-tryptophan. More importantly, the high surface area, polymeric chirality environment, and highly accessible functional sites on the surface of HMOF-3 nanosheets enable close contact with probed enantiomers, leading to highly enantioselective and sensitive sensing. The turn-on mechanism of host-guest-assisted electronic transfer is confirmed by DFT calculation and the relative experiment. This work highlights the promise of homochiral 2D MOF nanosheets for enantioselective sensing applications.

Confinement-guided photophysics in MOFs, COFs, and cages

In this review, the dependence of the photophysical response of chromophores in the confined environments associated with crystalline scaffolds, such as metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and molecular cages, has been carefully evaluated. Tunability of the framework aperture, cavity microenvironment, and scaffold topology significantly affects emission profiles, quantum yields, or fluorescence lifetimes of confined chromophores. In addition to the role of the host and its effect on the guest, the methods for integration of a chromophore (e.g., as a framework backbone, capping linker, ligand side group, or guest) are discussed. The overall potential of chromophore-integrated frameworks for a wide-range of applications, including artificial biomimetic systems, white-light emitting diodes, photoresponsive devices, and fluorescent sensors with unparalleled spatial resolution are highlighted throughout the review.