Electrochromic Bis(terpyridine)metal Complex Nanosheets

Modulation between capacitor and conductor for a redox-active 2D bis(terpyridine)cobalt(II) nanosheet via anion-exchange

Ionic polymers are intriguing materials whose functionality arises from the synergy between ionic polymer backbones and counterions. A key method for enhancing their functionality is the post-synthetic ion-exchange reaction, which is instrumental in improving the chemical and physical properties of polymer backbones and introducing of the functionalities of the counterions. Electronic interaction between host polymer backbone and guest ions plays pivotal roles in property modulation. The current study highlights the modulation of responses to external electric field in cationic bis(terpyridine)cobalt(II) polymer nanofilms through anion-exchange reactions. Initially, as-prepared chloride-containing polymers exhibited supercapacitor behaviour. Introducing anionic metalladithiolenes into the polymers altered the behaviour to either conductive or insulative, depending on the valence of the metalladithiolenes. This modulation was accomplished by fine tuning of charge-transfer interactions between the bis(terpyridine)cobalt(II) complex moieties and redox-active anions. Our findings open up new avenue for ionic polymers, showcasing their potential as versatile platform in materials science.

Electrochemically driven physical properties of solid-state materials: action mechanisms and control schemes

The various physical properties recently induced by solid-state electrochemical reactions must be comprehensively understood, and their mechanisms of action should be elucidated. Reversible changes in conductivity, magnetism, and colour have been achieved by combining the redox reactions of d metal ions and organic materials, as well as the molecular and crystal structures of solids. This review describes the electrochemically driven physical properties of conductors, magnetic materials, and electrochromic materials using various electrochemical devices.

Regulating Gelation and Luminescence Behaviors of Single Pyridine-Functionalized Cyanostilbene via Metal Ions

Luminescent metal-organic gels (LMOGs) have gained much attention due to their crucial role in visual recognition and information encryption. However, it is still a challenge to simplify the design of ligands and enrich the stimuli responses in LMOGs simultaneously. Herein, although a single pyridine ligand cannot form gel alone, after coordination with metal ions, two kinds of LMOGs have been obtained with pyridine-metal complexes, where metal ions can act as cogelators and regulate luminescence of the pyridine-functionalized cyanostilbene ligand at the same time. The effects of metal types on the fluorescence emission color, the fluorescence quantum yield, the fibril network, and the assembly mode of the gel have been investigated systematically. In addition, two competitive ligands were used to regulate the fluorescence and phase transition of the gel. Finally, the logic gates and the information encryption and decryption have been successfully constructed. This kind of material is expected to be applied to fluorescence display, advanced information encryption, high-tech anticounterfeit, and so forth.

Laser-Driven Rapid Synthesis of Metal-Organic Frameworks and Investigation of UV-NIR Optical Absorption, Luminescence, Photocatalytic Degradation, and Gas and Ion Adsorption Properties

In this study, we designed a platform based on a laser-driven approach for fast, efficient, and controllable MOF synthesis. The laser irradiation method was performed for the first time to synthesize Zn-based MOFs in record production time (approximately one hour) compared to all known MOF production methods with comparable morphology. In addition to well-known structural properties, we revealed that the obtained ZnMOFs have a novel optical response, including photoluminescence behavior in the visible range with nanosecond relaxation time, which is also supported by first-principles calculations. Additionally, photocatalytic degradation of methylene blue with ZnMOF was achieved, degrading the 10 ppm methylene blue (MB) solution 83% during 1 min of irradiation time. The application of laser technology can inspire the development of a novel and competent platform for a fast MOF fabrication process and extend the possible applications of MOFs to miniaturized optoelectronic and photonic devices.

Exploring redox properties of a 3D Co-based framework with bis(triarylamine) terphenyl as a redox-active linker

A 3D Co-based metal-organic framework has been prepared, which contains a bis(triarylamine) with terphenyl units as a redox-active linker. Manipulation of the redox events via the electrochemical method confirmed that charge hopping is dominant within the 3D framework. Investigation of the in situ spectroelectrochemical properties within the structure leads to the formation of mono and dual radical cations obtained reversibly in two-steps due to the presence of two redox-active sites.

A Large-Area Patterned Hydrogen-Bonded Organic Framework Electrochromic Film and Device

Fabrication of a patterned hydrogen-bonded organic framework (HOF) films on a large scale is an extreme challenge. In this work, a large area HOF film (30 × 30 cm2 ) is prepared via an efficient and low-cost electrostatic spray deposition (ESD) approach on the un-modified conductive substrates directly. Combining the ESD with a template method, variously patterned HOF films can be easily produced, including deer- and horse-shaped films. The obtained films exhibit excellent electrochromic performance with multicolor change from yellow to green and violet, and two-band regulation at 550 and 830 nm. Benefiting from the inherently present channels of HOF materials and the additional film porosity created by ESD, the PFC-1 film could quickly change color (within 10 s). Furthermore, the large-area patterned EC device is constructed based on the above film to prove practical potential application. The presented ESD method can be extended to other HOF materials; thus, this work paves a feasible path for constructing large-area patterned HOF films for practical optoelectronic applications.

Chemical bottom-up approach for inorganic single-atomic layers aiming beyond graphene

A chemical bottom-up approach for single-atomic-layered materials like graphene is attractive due to the possibility of introducing functions. This article includes the synthesis and properties of borophene-oxide and metalladithiolene layers, which are reported as inorganic materials. They have graphene-like two-dimensional networks that enable conjugated structures. Their atomically thin layers are also available by dissolution or synthetic methods. Their two-dimensional electronic features are evaluated from the activation energies for electrical conduction, focusing on the anisotropic features of borophene-oxide layers and the switching abilities of metalladithiolene layers.

Bottom-up Synthesis of Nanosheets at Various Interfaces

Nanostructured materials with high aspect ratios have been widely studied for their unique properties. In particular, nanosheets have safety, dispersibility, and nanosized effects, and nanosheets with exceptionally small thicknesses exhibit unique properties. For non-exfoliable materials, the bottom-up nanosheet growth using various interfaces as templates have been investigated. This review article presents the synthesis of nanosheets at the interfaces and layered structure; it explains the features of each interface type, its advantages, and its uniqueness. The interfaces work as templates for nanosheet synthesis. We can easily use the liquid-liquid and gas-liquid interfaces as the templates; however, the thickness of nanosheets usually becomes thick because it allows materials to grow in thickness. The solid-gas and solid-liquid interfaces can prevent nanosheets from growing in thickness. However, the removal of template solids is required after the synthesis. The layered structures of various materials provide two-dimensional reaction fields between the layers. These methods have high versatility, and the nanosheets synthesized by these methods are thin. Finally, this review examines the key challenges and opportunities associated with scalable nanosheet synthesis methods for industrial production.

Comprehensively Optimizing Fenton Reaction Factors for Antitumor Chemodynamic Therapy by Charge-Reversal Theranostics

Chemodynamic therapy (CDT) is a highly tumor-specific treatment, while its efficacy is compromised by the intratumoral Fenton reaction efficiency, which is determined by the following reaction factors, including the availability of Fenton ions (e.g., Fe2+), the amount of H2O2, and the degree of acidity. Synchronous optimization of these factors is a big challenge for efficient CDT. Herein, a strategy of comprehensively optimizing Fenton reaction factors was developed for traceable multistage augmented CDT by charge-reversal theranostics. The customized pH-responsive poly(ethylene)glycol-poly(β-amino esters) (PEG-PAE) micelle (PM) was prepared as the carrier. Glucose oxidase (GOx), Fe2+, and pH-responsive second near-infrared (NIR-II) LET-1052 probe were coloaded by PM to obtain the final theranostics. The activity of metastable Fe2+ remained by the unsaturated coordination with PEG-PAE. Then tumor accumulation and exposure of Fe2+ were achieved by charge-reversal cationization of PEG-PAE, which was further enhanced by a GOx catalysis-triggered pH decrease. Together with the abundant H2O2 generation and pH decrease through GOx catalysis, the limiting factors of the Fenton reaction were comprehensively optimized, achieving the enhanced CDT both in vitro and in vivo. These findings provide a strategy for comprehensively optimizing intratumoral Fenton reaction factors to overcome the intrinsic drawbacks of current CDT.

Shape-Dependent Complementary Ditopic Terpyridine Pair with Two Levels of Self-Recognition for Coordination-Driven Self-Assembly

Molecular recognition in biological systems plays a vital role in the precise construction of biomacromolecules and the corresponding biological activities. Such recognition mainly relies on the highly specific binding of complementary molecular pairs with complementary sizes, shapes, and intermolecular forces. It still remains challenging to develop artificial complementary motif pairs for coordination-driven self-assembly. Herein, a series of shape-dependent complementary motif pairs, based on ditopic 2,2':6',2″-terpyridine (TPY) backbone, are designed and synthesized. The fidelity degrees of self-assemblies from these motifs are carefully evaluated by multi-dimensional mass spectrometry, nuclear magnetic resonance spectroscopy, and molecular modeling. In addition, two levels of self-recognition in both homoleptic and heteroleptic assembly are discovered in the assembled system. Through finely tuning the shape and size of the ligands, a complementary pair is developed with error-free narcissistically self-sorting at two levels of self-recognition, and the intrinsic principle is carefully investigated.

Metal-Terpyridine Assembled Functional Materials for Electrochromic, Catalytic and Environmental Applications

Molecular assembly induced by metal-terpyridine-based coordinative interactions has become an emergent research topic due to its ease of synthesis and diverse applications. This article highlights recent significant developments in the metal-terpyridine-based supramolecular architectures. At first, the design aspect of the molecular building blocks has been described, followed by elaboration on how the ligand backbone plays an important role for achieving different dimensionalities of the resulting assemblies which exhibit a wide range of potential applications. After that, we discussed different synthetic approaches for constructing these assemblies, and finally, we focused on their significant developments in three specific areas, viz., electrochromic materials, catalysis and a new application in wastewater treatment. In the field of electrochromic materials, these assemblies made important advancements in various aspects like sub-second switching time (<1 s), low switching voltage (<1 V), increased switching stability (>10000 cycles), tuning of multiple colors by using multimetallic systems, fabrication of charge storing electrochromic devices, utilizing and storing solar energy etc. Similarly, the catalysis field witnessed application of the metal-terpyridine assemblies in C-H monohalogenation, heterogeneous Suzuki-Miyaura coupling, photocatalysis, reduction of carbon dioxide, etc. Finally, the environmental application of these coordination assemblies includes capturing Cr(VI) from waste water efficiently with high capture capacity, good recyclability, wide pH independency etc.

Emerging Electrochromic Materials and Devices for Future Displays

With the rapid development of optoelectronic fields, electrochromic (EC) materials and devices have received remarkable attention and have shown attractive potential for use in emerging wearable and portable electronics, electronic papers/billboards, see-through displays, and other new-generation displays, due to the advantages of low power consumption, easy viewing, flexibility, stretchability, etc. Despite continuous progress in related fields, determining how to make electrochromics truly meet the requirements of mature displays (e.g., ideal overall performance) has been a long-term problem. Therefore, the commercialization of relevant high-quality products is still in its infancy. In this review, we will focus on the progress in emerging EC materials and devices for potential displays, including two mainstream EC display prototypes (segmented displays and pixel displays) and their commercial applications. Among these topics, the related materials/devices, EC performance, construction approaches, and processing techniques are comprehensively disscussed and reviewed. We also outline the current barriers with possible solutions and discuss the future of this field.

Two-Dimensional Janus Film with Au Nanoparticles Assembled on Trinuclear Gold(I) Pyrazolate Coordination Nanosheets for Photocatalytic H2 Evolution

A two-dimensional (2D) Janus film with self-assembled gold nanoparticles (AuNPs) is a class of fascinating materials that may offer unprecedented opportunities to realize diverse applications due to their two distinct faces with anisotropic properties. In this work, we report a novel, straightforward strategy for the preparation of a bilayer coordination nanosheet (CONASH)/AuNP Janus film, where the CONASH features infinite trinuclear gold(I) pyrazolate cyclic complexes with electron-accepting viologen as bridges. The bilayer film has visible light absorption and redox properties and showcased promising photocatalytic H₂ evolution activity by virtue of the formed unique heterojunction structure between AuNPs and CONASH. The current study opens a novel pathway for controlled fabrication of the 2D Janus film with assembled AuNPs for photocatalytic applications.

Chemically Laminated 2D Bis(terpyridine)metal Polymer Films: Formation Mechanism at the Liquid–Liquid Interface and Redox Rectification

Recent studies on molecular 2D materials with high tunability of structure and function have focused mostly on the discovery of new precursors. Here, we demonstrate a facile one‐pot synthesis of laminated 2D coordination polymer films comprising bis(terpyridine)iron and cobalt at a water/dichloromethane interface. Cross‐sectional elemental mapping unveiled the stratum‐like structure of the film and revealed that the second layer grows to the dichloromethane side below the first layer. Cyclic voltammetry clarified that the bottom layer mediates charge transfer between the top layer and the substrate in a narrow potential region of mixed‐valence states. Furthermore, the bilayer film sandwiched by electrodes in a dry condition shows stable rectification character, and the barrier voltage corresponds to the redox potential difference between the two layers. This study introduces a new strategy for polymer design to explore the materials science of molecular 2D materials.

Multi-Redox Responsive Behavior in a Mixed-Valence Semiconducting Framework Based on Bis-[1,2,5]-thiadiazolo-tetracyanoquinodimethane

The two-dimensional (2-D) framework, [Cu(BTDAT)(MeOH)] {BTDAT = bis-[1,2,5]-thiadiazolo-tetracyanoquinodimethane}, possesses remarkable multi-step redox properties, with electrochemical studies revealing six quasi-stable redox states in the solid state. In situ electron paramagnetic resonance and visible-near infrared spectroelectrochemistry elucidated the mechanism for these multi-step redox processes, as well as the optical and electrochromic behavior of the BTDAT ligand and framework. In studying the structural, spectroscopic, and electronic properties of [Cu(BTDAT)(MeOH)], the as-synthesized framework was found to exist in a mixed-valence state with thermally-activated semiconducting behavior. In addition to pressed pellet conductivity measurements, single-crystal conductivity measurements using a pre-patterned polydimethylsiloxane layer on a silicon substrate provide important insights into the anisotropic conduction pathways. As an avenue to further understand the electronic state of [Cu(BTDAT)(MeOH)], computational band structure calculations predicted delocalized electronic transport in the framework. On the balance of probabilities, we propose that [Cu(BTDAT)(MeOH)] is a Mott insulator (i.e., electron correlations cause a metal-insulator transition). This implies that the conductivity is incoherent. However, we are unable to distinguish between activated transport due to Coulombically bound electron-hole pairs and a hopping mechanism. The combined electrochemical, electronic, and optical properties of [Cu(BTDAT)(MeOH)] shine a new light on the experimental and theoretical challenges for electroactive framework materials, which are implicated as the basis of advanced optoelectronic and electrochromic devices.

Preparation of Various Nanomaterials via Controlled Gelation of a Hydrophilic Polymer Bearing Metal-Coordination Units with Metal Ions

We investigated the gelation of a hydrophilic polymer with metal-coordination units (HPMC) and metal ions (PdII or AuIII). Gelation proceeded by addition of an HPMC solution in N-methyl-2-pyrrolidone (NMP) to a metal ion aqueous solution. An increase in the composition ratio of the metal-coordination units from 10 mol% to 34 mol% (HPMC-34) increased the cross-linking rate with AuIII. Cross-linking immediately occurred after dropwise addition of an HPMC-34 solution to the AuIII solution, generating the separation between the phases of HPMC-34 and AuIII. The cross-linking of AuIII proceeded from the surface to the inside of the HPMC-34 droplets, affording spherical gels. In contrast, a decrease in the ratio of metal-coordination units from 10 mol% to 4 mol% (HPMC-4) decreased the PdII cross-linking rate. The cross-linking occurred gradually and the gels extended to the bottom of the vessel, forming fibrous gels. On the basis of the mechanism for the formation of gels with different morphologies, the gelation of HPMC-34 and AuIII provided nanosheets via gelation at the interface between the AuIII solution and the HPMC-34 solution. The gelation of HPMC-4 and PdII afforded nanofibers by a facile method, i.e., dropwise addition of the HPMC-4 solution to the PdII solution. These results demonstrated that changing the composition ratio of the metal-coordination units in HPMC can control the gelation behavior, resulting in different types of nanomaterials.

Dynamic Metal-Ligand Interaction of Synergistic Polymers for Bistable See-Through Electrochromic Devices

Bistable electrochromic materials are a promising alternative solution to reduce energy consumption in displays. Limited by the mechanism and lack of a design strategy, only a few electrochromic materials have truly been able achieve bistability. Herein, a novel strategy is proposed to design bistable electrochromic materials based on polymer-assisted dynamic metal-ligand coordination. The mechanism and materials of such unconventional electrochromic systems are proved by sufficient characterization. Synergistic stabilization of polymerized switchable dyes and the ionic ligand polymer are attracted to each other by supramolecular forces. The color states of the dye molecules are controlled and stabilized by valence changes of the metal ions. Meanwhile, through the polymerization of the electrochromic material and the nearby metal-ligand material, the metal ions of the electroinduced valence change are tightly fixed, and the related diffusion problem of the active EC component is also almost completely suppressed. This strategy successfully enables preparation of the corresponding transparent electrochromic displays with good performances, such as, the display information is clearly visible for more than 1.5 h without consuming energy. Furthermore, the new way of dynamic coordination or dissociation bistable displays could likely prosper the development of the electrochromic area and inspire other fields.

Stars and stripes: hexatopic tris(3,2':6',3''-terpyridine) ligands that unexpectedly form one-dimensional coordination polymers

The hexatopic ligands 1,3,5-tris(4,2':6',4''-terpyridin-4'-yl)benzene (1), 1,3,5-tris(3,2':6',3''-terpyridin-4'-yl)benzene (2), 1,3,5-tris{4-(4,2':6',4''-terpyridin-4'-yl)phenyl}benzene (3), 1,3,5-tris{4-(3,2':6',3''-terpyridin-4'-yl)phenyl}benzene (4) and 1,3,5-trimethyl-2,4,6-tris{4-(3,2':6',3''-terpyridin-4'-yl)phenyl}benzene (5) have been prepared and characterized. The single crystal structure of 1·1.75DMF was determined; 1 exhibits a propeller-shaped geometry with each of the three 4,2':6',4''-tpy domains being crystallographically independent. Packing of molecules of 1 is dominated by face-to-face π-stacking interactions which is consistent with the low solubility of 1 in common organic solvents. Reaction of 5 with [Cu(hfacac)2]·H2O (Hhfacac = 1,1,1,5,5,5-hexafluoropentane-2,4-dione) under conditions of crystal growth by layering resulted in the formation of [Cu3(hfacac)6(5)] n ·2.8nC7H8·0.4nCHCl3. Single-crystal X-ray diffraction reveals an unusual 1D-coordination polymer consisting of a series of alternating single and double loops. Each of the three crystallographically independent Cu atoms is octahedrally sited with cis-arrangements two N-donors from two different ligands 1 and, therefore, cis-arrangements of coordinated [hfacac]- ligands; this observation is unusual among compounds in the Cambridge Structural Database containing {Cu(hfacac)2N2} coordination units in which the two N-donors are in a non-chelating ligand.

Syntheses, crystal structures and supramolecular assemblies of two Cu(ii) complexes based on a new heterocyclic ligand: insights into C–H⋯Cl and π⋯π interactions

A new heterocyclic ligand, N3L [4-(1-methylimidazole)-2,6-di(pyrazinyl)pyridine] and two Cu(ii) complexes have been synthesized and characterized by several spectroscopic and DFT methods.

Resonance Raman Excitation Profiles of Fe(II)-Terpyridine Complexes: Electronic Effects of Ligand Modifications

Metal 2,2':6',2″-terpyridine (tpy) complexes are readily used as building blocks in metallo-supramolecular polymers that stand out for their photophysical properties in solar energy assemblies. Furthermore, Resonance Raman (RR) excitation profiles are sensitive indicators of the electronic properties of chromophores. Previously, using RR spectroscopy, we studied the [Fe(tpy)₂]²⁺ complex and metallo-supramolecular polymers formed by tpy derivatives and Fe(II) ions. Here, we compare RR spectra of iron (Fe(II)) complexes with 4'-substituted tpy ligands─[Fe(4'-R-tpy)₂]²⁺, with R = H (1a), Cl (2a), 4-chlorophenyl (3a), and 2-thienyl (4a) to describe changes in their electronic structure after functionalization. By combining theoretical calculations, RR, and UV/vis spectra, we elucidated differences in the RR excitation profiles of 1a, 2a, and 4a complexes. In all Raman modes, complexes 1a and 2a showed maximal enhancement only at 532 nm excitation, whereas complex 4a exhibited maximal enhancement selectively at either 532 or 633 nm excitations. Based on our calculations, the mixed metal/ligand character of the highest occupied molecular orbital (HOMO) of 4a complex manifests itself through selective enhancement of vibration modes, mainly localized on the 2-thienyl unit at 633 nm excitation, which may explain the unique behavior of this complex. Therefore, complex 4a is a prospective candidate for further detailed photophysical explorations toward developing sensitizers for solar cells.

A new cobalt(II) complex nanosheet as an electroactive medium for plasmonic switching on Au nanoparticles

2D metal-organic complex nanosheets with the merits of high stability and structure tunability are an emerging topic in recent years. To extend the promising ultrathin architectures, a new Co(II) complex nanosheet (Co-nanosheet) is designed and prepared via a readily operated interface-assisted coordination reaction between the ligand 4,4'',4'''-(2,4,6-trimethylbenzene-1,3,5-triyl)tris(2,2':6',2''-terpyridyl) (L) and Co²⁺ ions. The as-formed Co(II) complex nanosheet exhibits both a uniform layered structure and good thermostability as proposed, which were verified by various chemical and physical analytical methods. Moreover, it is first utilized as an electroresponsive medium to tune the surface plasmon resonance behavior of Au nanoparticles, expanding the applicable fields of this type of 2D materials.

Pathway-Dependent Coordination Networks: Crystals versus Films

We demonstrate the formation of both metallo-organic crystals and nanoscale films that have entirely different compositions and structures despite using the same set of starting materials. This difference is the result of an unexpected cation exchange process. The reaction of an iron polypyridyl complex with a copper salt by diffusion of one solution into another resulted in iron-to-copper exchange, concurrent ligand rearrangement, and the formation of metal–organic frameworks (MOFs). This observation shows that polypyridyl complexes can be used as expendable precursors for the growth of MOFs. In contrast, alternative depositions of the iron polypyridyl complex with a copper salt by automated spin coating on conductive metal oxides resulted in the formation of electrochromic coatings, and the structure and redox properties of the iron complex were retained. The possibility to form such different networks from the same set of molecular building blocks by “in solution” versus “on surface” coordination chemistry broadens the synthetic space to design functional materials.

Two-Dimensional π-Conjugated Frameworks as a Model System to Unveil a Multielectron-Transfer-Based Energy Storage Mechanism

ConspectusAlthough electrochemical energy storage is commonplace in our society, further advancements in this technology are indispensable for the transition to a low-carbon society. Recent intensive research has expanded concepts in this field; however, finding one suitable material to obtain a high energy density accomplishing the criteria of next-generation batteries is still a conundrum. To solve this issue, material investigations based on big data combined with artificial intelligence are a present trend. On the contrary, this Account focuses on an alternative approach, i.e., fundamental research to shed light on key basic principles to design new electrode materials and new principles achieving multielectron transfer, which is a key to improve a specific capacity. In addition to the cation-redox mechanism, materials showing the multielectron-transfer mechanism based on cation-/anion-redox can enrich material choices with high theoretical energy densities. The challenge in this mechanism is that a rational design of electrode materials based on microscopic understanding of underlying electrode processes has not been fully achieved so far. This is a key bottleneck in machine-learning approaches as well because the reliability of outputs from an algorithm is dependent on the reliability of data from a corresponding microscopic electrode process. Therefore, uncovering fundamental mechanisms in electrochemical energy storage remains one of the primary goals for the present research. In our series of investigations, we developed concepts for replacing complex practical electrode materials, such as polyanion or Li-rich layered oxides, by simplified model systems based on two-dimensional (2D) π-conjugated frameworks, which are based on purely organic aromatic systems and metal-containing coordination polymers. These materials are relatively simple, but it is still possible to control their complexity of systems in order to mimic certain aspects of structure-property relations in practical electrode materials. In particular, recent studies have shown that we can tune electronic structures of 2D π-conjugated frameworks, which is a key feature to investigate electron-transfer mechanisms, along with the concept of the threefold correlation approach, i.e., the relations in chemical structures, electronic structures, and electrochemical reactions. In this Account, several model studies focusing on microscopic understandings of structure-electrochemical energy storage functions are presented in which we investigate how the structural periodicity and nature of the coordination environment affect their electronic properties and the electrochemical reactions. In particular, we investigate the effects of combinations of linkers and metal ions toward the mechanism of the electrochemical energy storage reaction. We identified few major factors determining the energy storage mechanism of 2D π-conjugated frameworks. Local configurations of coordinate covalent bonding and organic linkers interact with each other, and these effects provide unique electronic states. These electronic states are projections of intriguing electrochemical features in this materials system, such as cation/anion co-redox mechanism, anion-insertion mechanism, or inductive effect. This Account indicates that 2D π-conjugated frameworks can be applied as models to extract fundamental/microscopic principles in the complicated electrode processes, which is linked to practical electrode materials, such as oxides. Therefore, the approach shown here is a powerful tool to unveil microscopic electrochemical energy storage mechanisms, which is indispensable to advance clean energy technology and accelerate decarbonization.

Transmissive to blackish-green NIR electrochromism in a Co(II)-based interfacial co-ordination thin film

Herein, a Co(ii)-based metallo-polymer (Co-tpy-L) with a three armed non-conjugated terpyridine ligand is synthesized using solvent-solvent interfacial polymerization. The thin film exhibits durable transmissive-to-blackish green electrochromism, selectively covering both the visible and NIR regions with a moderate voltage range of -1.4 to 0 V.

Two-Dimensional Bis(dithiolene)iron(II) Self-Powered UV Photodetectors with Ultrahigh Air Stability

Organometallic two-dimensional (2D) nanosheets with tailorable components have recently fascinated the optoelectronic communities due to their solution-processable nature. However, the poor stability of organic molecules may hinder their practical application in photovoltaic devices. Instead of conventional organometallic 2D nanosheets with low weatherability, an air-stable π-conjugated 2D bis(dithiolene)iron(II) (FeBHT) coordination nanosheet (CONASH) is synthesized via bottom-up liquid/liquid interfacial polymerization using benzenehexathiol (BHT) and iron(II) ammonium sulfate [Fe(NH4)2(SO4)2] as precursors. The uncoordinated thiol groups in FeBHT are easily oxidized, but the Fe(NH4)2(SO4)2 dissociation rate is slow, which facilitates the protection of sulfur groups by iron(II) ions. The density functional theory calculates that the resultant FeBHT network gains the oxygen-repelling function for oxidation suppression. In air, the FeBHT CONASH exhibits self-powered photoresponses with short response times (<40 ms) and a spectral responsivity of 6.57 mA W-1, a specific detectivity of 3.13 × 1011 Jones and an external quantum efficiency of 2.23% under 365 nm illumination. Interestingly, the FeBHT self-powered photodetector reveals extremely high long-term air stability, maintaining over 94% of its initial photocurrent after aging for 60 days without encapsulation. These results open the prospect of using organometallic 2D materials in commercialized optoelectronic fields.

Stepwise introduction of three different transition metals in metallo-supramolecular polymer for quad-color electrochromism

Metallo-supramolecular polymers (MSPs) show unique electrochemical and optical properties, that are different to organic polymers, caused by electronic interactions between metals and ligands. For the development of quad-color electrochromic materials, here we report the stepwise introduction of three different transition metal ions into an MSP, utilizing the different complexation abilities of the transition metals. An MSP with Os(II), Ru(II), and Fe(II) (polyOsRuFe) was synthesized via a stepwise synthetic route through the formation of an Os(II) complex first, followed by the introduction of Ru(II) to the Os(II) complex, and finally the attachment of Fe(II) to the Os(II)-Ru(II) complex to produce the polymer. This synthetic procedure was extended to fabricate MSPs that comprised Co(II)/Ru(II)/Os(II) and Zn(II)/Ru(II)/Os(II). The synthesized MSPs showed a broad optical and electrochemical window due to the coupling of three heterometallic segments into the polymer. Introducing acetate anion as the counter anion greatly enhanced the solubility of polyOsRuFe in methanol. A thin film of polyOsRuFe was prepared on ITO/glass by spin-coating the methanol solution, and its reversible quad-color electrochromism was demonstrated.

Green revolution in electronic displays expected to ease energy and health crises

The technological revolution of long-awaited energy-saving and vision-friendly displays represented by bistable display technology is coming. Here we discuss methods, challenges, and opportunities for implementing bistable displays in terms of molecular design, device structure, further expansion, and required criteria, hopefully benefiting the light-related community.

Ligand-Controlled Electrochromic Diversification with Multilayer Coated Metallosupramolecular Polymer Assemblies

Designing surface-confined molecular systems capable of expressing changes in functional properties as a result of slight variations in chemical structure under the influence of an external stimulus is of contemporary interest. In this context, we have designed three tetraterpyridine ligands with variations in their core architecture (phenyl vs tetraphenylethynyl vs bithiophene) to create spray-coated electrochromic assemblies of iron(II)-based metallosupramolecular polymer network films on transparent conducting oxide substrates. These assemblies exhibited molecular permeability and spectroelectrochemical properties that are in turn dictated by the ligand structure. Electrochromic films with high coloration efficiencies (up to 1050 cm²/C) and superior optical contrast (up to 76%) with a concomitant color-to-color redox transition were readily achieved. These functional switching elements were integrated into sandwich-type electrochromic cells (CE up to 641 cm²/C) that exhibited high contrast ratios of up to 56%, with attractive ON-OFF ratios, fast switching kinetics, and high operational stability. Every measurable spectroelectrochemical property of the films and devices is an associated function of the ligand structure that coordinates the same metal ion to different extents. While exhibiting a ligand-structure induced differential metal coordination leading to porosity and spectroelectrochemical diversification, these assemblies allow the creation of electrochromic patterns and images by a simple spray-coating technique.

Iron (II) Metallo-Supramolecular Polymers Based on Thieno[3,2-b]thiophene for Electrochromic Applications

Four new bis(tpy) unimers with different linkers between the thieno[3,2-b]thiophene-2,5-diyl central unit and terpyridine-4′-yl (tpy) end-groups: no linker (Tt), ethynediyl (TtE), 1,4-phenylene (TtPh) and 2,2′-bithophene-5,5′-diyl (TtB) are prepared, characterized, and assembled with Fe²⁺ ions to metallo-supramolecular polymers (Fe-MSPs). The Fe-MSP films prepared by spin-casting on Indium Tin Oxide (ITO) glass are characterized by atomic force microscope (AFM) microscopy, cyclic voltammetry, and UV/vis spectroscopy and studied for their electrochromism and effect of the unimer structure on their electrochromic performance. Of the studied MSPs, Fe-Tt shows the highest optical contrast as well as coloration efficiency (CE = 641 cm² C⁻¹) and the fastest optical response. This makes it an excellent candidate for possible use in electrochromic devices.

Crystalline Free-Standing Two-Dimensional Zwitterionic Organic Nanosheets for Efficient Conduction of Lithium Ions

Crystalline two-dimensional organic nanosheets (2D-ONs) having atomic or near-atomic thickness with infinite lateral dimensions are of crucial significance for their possible application as a material for energy storage. The presence of nanofluidic channels with a designed array of molecular interlayers in such 2D-ONs, for a favorable lithium-ion transport, has special significance for improving the efficacy of lithium-ion batteries. However, the rational design of crystalline 2D-ONs remains a challenge because of the lack of appropriate monomers and convenient preparation methods. Herein, we report a unique lithium-ion conducting behavior of zwitterionic 2D-ONs, formed through self-assembly of a small organic molecule AM-1. Different microscopic studies confirm the near-atomic thickness (∼3.5 nm) of these 2D-ONs. Results of the single-crystal X-ray diffraction studies confirm the presence of a one-dimensional (1D) channel in crystalline 2D-ONs, which was generated during the self-assembly process of the zwitterionic monomer scaffold. The presence of immobilized ionic centers with well-defined directional channels in the 2D-ONs favors the transportation of lithium ions with a room-temperature lithium-ion conductivity of 5.14 × 10^-5 S cm^-1, which is rather unique for self-assembled 2D-ONs.

Dual-Redox System of Metallo-Supramolecular Polymers for Visible-to-Near-IR Modulable Electrochromism and Durable Device Fabrication

Dual-redox metallo-supramolecular polymers with a zigzag structure (polyFe-N and polyRu-N) were successfully synthesized by 1:1 complexation of a redox-active Fe(II) or Ru(II) ion and 4,4-bis(2,2:6,2-terpyridinyl)phenyl-triphenylamine (L_TPA) as a redox-active ligand. The polymers had high solubility in methanol, and the polymer solutions showed dark brown (polyFe-N) or orange-red (polyRu-N) coloration. UV-vis spectra of the polymers displayed a strong metal-to-ligand charge transfer (MLCT) absorption in the visible region. Cyclic voltammograms of the polymer films exhibited two pairs of reversible redox waves. The first redox at ∼0.5 V versus Ag/Ag⁺ was assigned to the redox in the triphenylamine (TPA) moiety of L_TPA, and the second redox at 0.8 V versus Ag/Ag⁺ (polyFe-N) or 0.9 V versus Ag/Ag⁺ (polyRu-N) was given to the redox of Fe(II)/(III) or Ru(II)/(III), respectively. Upon applying a positive potential of more than 0.5 V versus Ag/Ag⁺ to the polymer films, a new absorption at ∼820 nm in the near-infrared (NIR) region appeared with wide tailing to the longer wavelength. It is considered that the new absorption in the NIR region is caused by the polaron band of the oxidized ligand in the polymers. When the applied potential was increased to 1.0 V versus Ag/Ag⁺ (polyFe-N) or 1.1 V versus Ag/Ag⁺ (polyRu-N), the maximum wavelength of the new absorption in the NIR region shifted to 885-900 nm and the absorbance was further enhanced with disappearance of the MLCT absorption. Eventually, the original colors of the polymers were faint to light green. This visible-to-NIR electrochromism was reversible, and maximum optical contrast (ΔT) reached 52% in the visible region and 80% in the NIR region. A prototype solid-state device with the polymer was fabricated for practical utilization, exhibiting excellent cycle stability of >4000 cycles with maintaining high optical contrast from the visible-to-NIR range.

Oxidized divinyl oligoacene-bridged diruthenium complexes: bridged localized radical characters and reduced aromaticity in bridge cores

A series of bimetallic ruthenium vinyl complexes 1-5 bridged by oligoacenes were synthesized and characterized in this study. Comparative cyclic voltammetry results from 1-5 indicated that the first oxidation potential decreased gradually with the extension of conjugate ligands. Upon oxidation to singly oxidized species 1+-5+, rather small ν(CO) changes in the infrared (IR) spectra and the characteristic bands of metal-to-ligand charge transfer absorptions in the near IR (NIR) region predicted via time-dependent DFT calculations suggested that strong bridged ligands participate in redox processes. NIR absorptions were not observed in complexes 4+ and 5+ possibly because of instability in their twisted and noncoplanar geometry. Electron paramagnetic resonance results and spin density distribution demonstrated that the bridged localized degrees of 1+-5+ successively increased with the extension of oligoacene from benzene to tetracene. Further comparative analysis of neutral molecules and monocations to the aromaticity and π-electron density of bridge cores indicated a step-by-step transformation process from an aromatic to quinoidal radical upon oxidation.

A delocalized cobaltoviologen with seven reversibly accessible redox states and highly tunable electrochromic behaviour

Co^II mediates electronic coupling between two N-Me-pyridinium-terpyridine ligands that are related to redox-active N,N-dialkyl-4,4'-bipyridinium dications (viologens). Borderline Class II/III electronic delocalization imparts the cobaltoviologen complex with distinct electronic properties (e.g., 7 accessible redox states) relative to those of viologens, leading to enhanced electrochromism.

Yellow-to-brown and yellow-to-green electrochromic devices based on complexes of transition metal ions with a triphenylamine-based ligand

Transmissive-to-colored electrochromism has been achieved by combination of MLCT of transition metal complexes with the electrochromic properties of ligand molecules. The color transitions were from yellow to dark brown for the Fe(ii) complex, yellow to orange to bluish-green for the Co(ii) complex and yellow to green for the Zn(ii) complex. By using a metal ion-ligand coordination approach, the self-assembly of hydrazone-based ligands containing a triphenylamine group with appropriate metal salts (FeCl2, Co(ClO4)2 and Zn(BF4)2) produced novel complexes of the general formula [ML2]X2. The isolated complexes were characterized by spectroscopic methods, and the Co(ii) complex also by X-ray diffraction analysis. Thin films of the complexes have been obtained by a spray-coating method and they were used in the construction of electrochromic devices, which showed good electrochromic stability, a high color contrast of 47.5% for Fe(ii), 37.2% for Co(ii) and 33.7% for Zn(ii) complexes and fast coloring and bleaching times.