Single-Walled MoO3 Nanotubes

Intercalating a potassium-aqua complex cation into an α-MoO3 layer without reducing molybdenum: a potential storage system

We have demonstrated a green aqueous synthesis of rod-shaped MoO3 material, [MoVI3O9{K(H2O)4}(CH3COO)]·H2O (2) intercalating potassium-aqua-complex acetate into its lamellar space, simply by ion-exchange of Co(II)-aqua-complex in compound [MoVI4O12(CH3COO)2{CoII(H2O)6}]·2H2O (1) by {K(H2O)4}+ in an aqueous solution of 1 and KCl. Compound 2 acts as a potential storage system of alkali metal ions.

Molybdenum oxide nanotube caps decorated with ultrafine Ag nanoparticles: Synthesis and antimicrobial activity

In the contemporary era, microorganisms, spanning bacteria and viruses, are increasingly acknowledged as emerging contaminants in the environment, presenting significant risks to public health. Nevertheless, conventional methods for disinfecting these microorganisms are often ineffective. Additionally, they come with disadvantages such as high energy usage, negative environmental consequences, increased expenses, and the generation of harmful byproducts. The development of next-generation antifungal and antibacterial agents is dependent on newly synthesized nanomaterials with inherent antimicrobial behavior. In this study, we report an arc-discharge method to synthesize MoOx nanosheets and microbelts, followed by decorating them with ultrafine Ag nanoparticles (NPs). Scanning and transmission electron microscopies show that Ag NPs formation on the Molybdenum oxide nanostructures rolls them into nanotube caps (NTCs), revealing inner and outer diameters of approximately 19.8 nm and 105.5 nm, respectively. Additionally, the Ag NPs are ultrafine, with sizes in the range of 5-8 nm. Results show that the prepared NTCs exhibit dose-dependent sensitivity to both planktonic and biofilm cells of Escherichia coli and Candida albicans. The anti-biofilm activity in terms of biofilm inhibition ranged from 19.7 to 77.2% and 11.3-82.3%, while removal of more than 70% and 90% of preformed biofilms was achieved for E. coli and C. albicans, respectively, showing good potential for antimicrobial coating. Initial MoOx exhibits positive potential, while Ag-decorated Molybdenum oxide NTCs show dual potential effects (positive for Molybdenum oxide NTCs and negative for Ag NPs. Molybdenum oxide NTCs, with their strong positive potential, efficiently attract microbes due to their negatively charged cell surfaces, facilitating the antimicrobial effect of Ag NPs, leading to cell damage and death. These findings suggest that the synthesized NPs could serve as a suitable coating for biomedical applications.

Chemomechanically Stable Small Single-crystal Mo-doped LiNi0.6 Co0.2 Mn0.2 O2 Cathodes for Practical 4.5 V-class Pouch-type Li-ion Batteries

High voltage can cost-effectively boost energy density of Ni-rich cathodes based Li-ion batteries (LIBs), but compromises their mechanical, electrochemical and thermal-driven stability. Herein, a collaborative strategy (i.e., small single-crystal design and hetero-atom doping) is devised to construct a chemomechanically reliable small single-crystal Mo-doped LiNi_0.6 Co_0.2 Mn_0.2 O₂ (SS-MN6) operating stably under high voltage (≥4.5 V vs. Li/Li⁺ ). The substantially reduced particle size combined with Mo⁶⁺ doping absorbs accumulated localized stress to eradicate cracks formation, subdues the surface side reactions and lattice oxygen missing meanwhile, and improves thermal tolerance at highly delithiated state. Consequently, the SS-MN6 based pouch cells are endowed with striking deep cycling stability and wide-temperature-tolerance capability. The contribution here provides a promising way to construct advanced cathodes with superb chemomechanical stability for next-generation LIBs.

Single Crystals of α-MoO3-Intercalated {Ni(H2O)6}2+ and Electrocatalytic Water Reduction: Toward a Class of Molybdenum Bronzes

We have successfully intercalated {Ni^II(H₂O)₆}²⁺ into the α-MoO₃ layer, leading to the isolation of green single crystals of [Mo^VI₂O₆(CH₃COO){Ni^II(H₂O)₆}_0.5]·H₂O (1). The homogeneous electrochemistry of 1 in its aqueous solution exhibits electrocatalytic hydrogen evolution reaction (HER) with concomitant electrochemical deposition of [HMo₃^VIMo^VO₁₂(CH₃COO){Ni^II(H₂O)₅(OH)}] (2). Compound 2, a new molybdenum bronze, acts as an efficient and stable heterogeneous electrocatalyst for water reduction to molecular hydrogen. This work represents the first paradigm of a molybdenum bronze intercalating a transition metal-aqua ion.

Interfacial Engineering of Two-Dimensional MoN/MoO2 Heterostructure Nanosheets as a Bifunctional Electrocatalyst for Overall Water Splitting

It is still a challenge to realize the dream of hydrogen-based economy using a robust catalyst for overall water splitting. For the first time, we introduce two-dimensional MoN/MoO 2 heterostructure nanosheets using nickel foam as a substrate for water splitting. The heterojunction formation was achieved through the partial nitriding of Mo-based precursor to MoN in the annealing process under NH 3 environment. The heterogeneous interface between MoN and MoO 2 as active sites is supposed to improve the surface reaction kinetics and electronic conductivity. Therefore, excellent performance is achieved when MoN/MoO 2 is employed as both cathode and anode electrocatalysts, the corresponding cell voltages are 1.57 and 1.84 V at 10 and 100 mA cm -2 in 1 M KOH, respectively. The promising bifunctional catalytic performance of our catalyst opens up a new way for efficient electrochemical water splitting.

Shape controllable MoS2 nanocrystals prepared by the single precursor route for electrocatalytic hydrogen evolution

MoS₂ has attracted great attention as a prospective electrocatalyst for generating hydrogen via water electrolysis due to its abundant and inexpensive sources. However, bulk MoS₂ has weak electrocatalytic activity because of its low electrical conductivity and few edge-active sites. Controllable synthesis of MoS₂ with ultrasmall size or complex morphology may be an available strategy to boost its conductivity and edge-active sites. Herein, a facile single-precursor strategy was developed to prepare nanoscale MoS₂ with various morphologies, including quantum dots, nanorods, nanoribbons, and nanosheets. In-depth studies show that the formation of MoS₂ with various shapes is determined by both kinetic and thermodynamic factors such as reaction time and temperature. Electrocatalytic tests reveal that MoS₂ quantum dots have high electrocatalytic performance with a low overpotential of 255 mV and a small Tafel slope of 66 mV dec⁻¹ due to the abundant exposed active edges and excellent intrinsic conductivity.

A facile single-precursor route was designed for the synthesis of shape- and size-controllable MoS₂ nanocrystals, including MoS₂ QDs, nanorods, nanoribbons, and nanosheets. Among them, MoS₂ QDs exhibit higher electrocatalytic activity in HRE.

Double Confined MoO2/Sn/NC@NC Nanotubes: Solid-Liquid Synthesis, Conformal Transformation, and Excellent Lithium-Ion Storage

The rational design of a hollow heterostructure promotes the development of highly durable anode materials for lithium-ion batteries. Herein, carbon-confined MoO₂/Sn/NC@NC heterostructured nanotubes evolving from MoO₃ nanorods have been successfully synthesized for the first time. In the growth of the Mo/Sn precursor, a peculiar microstructure evolution occurs from solid rods to hollow tubes through a solid-liquid reaction. The MoO₂/Sn composite is restricted within the double carbon layer after subsequent annealing and carbonization that distinctly inherits the morphology of the Mo/Sn precursor. The resulting electrode shows good capacities with hardly any attenuation (925.4 mA h g^-1 after 100 cycles at 100 mA g^-1) and excellent long cycle life (620.1 mA h g^-1 after 1000 cycles at 2 A g^-1). The MoO₂/Sn/NC@NC nanotubes contain the synergistic effect, elaborate core-shell structure, large specific surface areas, and abundant voids. These superiorities not only provide beneficial channels for the electrolyte to fully come into contact with electrode materials and more active sites for redox reactions but also effectively alleviate the volume fluctuation and sustain the electrical connectivity to retain a stable solid-electrolyte interface layer, indeed, bringing about the prominent Li-storage performance. The present study paves a feasible avenue to prepare core-shell structures with high reversible capacity and long-term cycle performance for energy storage devices.

Synthesis and defect engineering of molybdenum oxides and their SERS applications

Surface-enhanced Raman scattering (SERS) spectroscopy has been developed into a cross-disciplinary analytical technology through exploring various materials' Raman vibrational modes with ultra-high sensitivity and specificity. Although conventional noble-metal based SERS substrates have achieved great success, oxide-semiconductor-based SERS substrates are attracting researchers' intensive interest due to their merits of facile fabrication, high uniformity and tunable SERS characteristics. Among all the SERS active oxide semiconductors, molybdenum oxides (MoO_x) possess exceptional advantages of high Raman enhancement factor, environmental stability, recyclable detection, etc. More interestingly, the SERS effect of the MoO_x SERS substrates may involve both the electromagnetic enhancement mechanism and the chemical enhancement mechanism, which is determined by the stoichiometry and morphology of the material. Therefore, the focus of this review will be on two critical points: (1) synthesis and material engineering methods of the functional MoO_x material and (2) MoO_x SERS mechanism and performance evaluation. First, we review recent works on the MoO_x preparation and material property tuning approaches. Second, the SERS mechanism and performance of various MoO_x substrates are surveyed. In particular, the performance uniformity, enhancement factor and recyclability are evaluated. In the end, we discuss several challenges and open questions related to further promoting the MoO_x as the SERS substrate for monitoring extremely low trace molecules and the theory for better understanding of the SERS enhancement mechanism.

Conversion of Intercalated MoO3 to Multi-Heteroatoms-Doped MoS2 with High Hydrogen Evolution Activity

Lack of effective strategies to regulate the internal activity of MoS₂ limits its practical application for hydrogen evolution reactions (HERs). Doping of heteroatoms without forming aggregation or an edge enrichment is still challenging, and its effect on the HER needs to be further explored. Herein, a two-step method is developed to obtain multi-metal-doped H-MoS₂ , which includes intercalation of the layered MoO₃ precursor with a following sulfurization. Benefiting from the capability of the intercalation method to uniformly and simultaneously introduce different elements into the van der Waals gap, this method is universal to obtain multi-heteroatoms co-doped MoS₂ without forming clusters, phase separation, and an edge enrichment. It is demonstrated that the doping of adjacent cobalt and palladium monomers on MoS₂ greatly enhances the HER catalytic activity. The overpotential at 10 mA cm^-2 and Tafel slope of Co and Pd co-doped MoS₂ is found to be 49.3 mV and 43.2 mV dec^-1 , respectively, representing a superior acidic HER catalytic activity. This intercalation-assisted method also provides a new and general strategy to synthesize uniformly doped transition metal dichalcogenides for various applications.

Nanostructured MoO3 for Efficient Energy and Environmental Catalysis

This paper mainly focuses on the application of nanostructured MoO₃ materials in both energy and environmental catalysis fields. MoO₃ has wide tunability in bandgap, a unique semiconducting structure, and multiple valence states. Due to the natural advantage, it can be used as a high-activity metal oxide catalyst, can serve as an excellent support material, and provide opportunities to replace noble metal catalysts, thus having broad application prospects in catalysis. Herein, we comprehensively summarize the crystal structure and properties of nanostructured MoO₃ and highlight the recent significant research advancements in energy and environmental catalysis. Several current challenges and perspective research directions based on nanostructured MoO₃ are also discussed.

Multi-amine-assisted crystal growth of large-sized α-MoO3 elongated nano-plates

Large-sized α-MoO₃ elongated nano-plates were synthesized by the introduction of multi-amines such as ethylene di-amine and diethylene tri-amine (DETA) in the conventional hydrothermal reaction. DETA made large hexagonal rods with an h-MoO₃ intermediate phase containing H₂O, NH₄OH, and DETA ions. During the hydrothermal reaction, the hexagonal rods were transformed to elongated α-MoO₃ nano-plates by the re-dissolution of h-MoO₃ and re-growth to α-MoO₃ because DETA retarded the preferred growth reaction of the MoO₆ octahedra to the [001] direction and helped the MoO₆ octahedra to grow in the [100] direction. In addition, DETA promoted α-MoO₃ nano-belts to be assembled into elongated nano-plates by oriented attachment because the multi-ammonium groups in the DETA backbone could adhere to the α-MoO₃ nano-belts due to attractive Coulomb interactions.

Oxygen vacancy-rich MoO3−x nanobelts for photocatalytic N2 reduction to NH3 in pure water

Photocatalytic nitrogen fixation is a promising sustainable and green strategy for NH₃ synthesis.

Molybdenum-Based Co-catalysts in Photocatalytic Hydrogen Production: Categories, Structures, and Roles

Photocatalytic hydrogen production by using solar energy has attracted great interest around the world. The main challenges are the high costs of the photocatalysts and the low efficiency of photocatalytic hydrogen production. Co-catalysts, as crucial components of photocatalysts, are usually used to stimulate photoexcited electron transfer from the light absorber to the surface, and they also catalyze the proton-reduction reaction to form H₂ in water. However, most co-catalysts used in photocatalytic hydrogen production are noble metals, which are expensive and contradict the low-costs demanded by industry. Therefore, the development of earth-abundant and cheap co-catalysts to replace noble metals is necessary for photocatalytic H₂ production. This account highlights the performance and roles of molybdenum-based non-noble metal co-catalysts in photocatalytic hydrogen production. We developed a series of inexpensive and efficient molybdenum-based co-catalysts. We demonstrated that more H₂ could be produced by loading Mo-based co-catalysts on CdS by using the co-precipitation method than by using traditional Pt/CdS same under the same photocatalytic conditions. The molybdenum-based co-catalysts were able to form heterojunctions, which served as bridges to facilitate the transport and separation of photogenerated charges; moreover, the molybdenum-based co-catalysts were able to accept and store photoexcited electrons owing to their large specific capacitance. The stored photoelectrons could then be released according to proton-reduction processes to form H₂ . Furthermore, the molybdenum-based co-catalysts were found to have metastable state structures and multiple valence states, which provided more active sites and effectively catalyzed the production of H₂ and inhibited the reverse reaction. The discovery of Mo-based co-catalysts with superior properties will provide guidance for the design of new co-catalysts.

Imogolite Nanotubes: A Flexible Nanoplatform with Multipurpose Applications

Among a wide variety of inorganic nanotubes, imogolite nanotubes (INTs) represent a model of nanoplatforms with an untapped potential for advanced technological applications. Easily synthesized by sol-gel methods, these nanotubes are directly obtained with a monodisperse pore size. Coupled with the possibility to adjust their surface properties by using straightforward functionalization processes, INTs form a unique class of diameter-controlled nanotubes with functional interfaces. The purpose of this review is to provide the reader with an overview of the synthesis and functionalization of INTs. The properties of INTs will be stated afterwards into perspective with the recent development on their applications, in particular for polymer/INTs nanocomposites, molecular confinement or catalysis.

Structural resolution of inorganic nanotubes with complex stoichiometry

Determination of the atomic structure of inorganic single-walled nanotubes with complex stoichiometry remains elusive due to the too many atomic coordinates to be fitted with respect to X-ray diffractograms inherently exhibiting rather broad features. Here we introduce a methodology to reduce the number of fitted variables and enable resolution of the atomic structure for inorganic nanotubes with complex stoichiometry. We apply it to recently synthesized methylated aluminosilicate and aluminogermanate imogolite nanotubes of nominal composition (OH)₃Al₂O₃Si(Ge)CH₃. Fitting of X-ray scattering diagrams, supported by Density Functional Theory simulations, reveals an unexpected rolling mode for these systems. The transferability of the approach opens up for improved understanding of structure–property relationships of inorganic nanotubes to the benefit of fundamental and applicative research in these systems.

Structural determination of inorganic nanotubes has lagged far behind that of their carbon-based counterparts. Here, the authors present a transferable methodology, combining wide angle X-ray scattering and computation, to quantitatively resolve the atomic structure of inorganic nanotubes with complex stoichiometry.

Pressure-induced phase transition and fracture in α-MoO3 nanoribbons

MoO₃ nanoribbons were studied under different pressure conditions ranging from 0 to 21GPa at room temperature. The effect of the applied pressure on the spectroscopic and morphologic properties of the MoO₃ nanoribbons was investigated by means of Raman spectroscopy and scanning electron microscopy techniques. The pressure dependent Raman spectra of the MoO₃ nanoribbons indicate that a structural phase transition occurs at 5GPa from the orthorhombic α-MoO₃ phase (Pbnm) to the monoclinic MoO₃-II phase (P2₁/m), which remains stable up to 21GPa. Such phase transformation occurs at considerably lower pressure than the critical pressure for α-MoO₃ microcrystals (12GPa). We suggested that the applanate morphology combined with the presence of crystalline defects in the sample play an important role in the phase transition of the MoO₃ nanoribbons. Frequencies and linewidths of the Raman bands as a function of pressure also suggest a pressure-induced morphological change and the decreasing of the nanocrystal size. The observed spectroscopic changes are supported by electron microscopy images, which clearly show a pressure-induced morphologic change in MoO₃ nanoribbons.

Nanocomposites based on tubular and onion nanostructures of molybdenum and tungsten disulfides: inorganic design, functional properties and applications

The review concerns the development and the state-of-the-art in studies on the surface modification methods aimed at fabricating promising nanocomposites based on multilayer inorganic tubular and onion (fullerene-like) MoS2 and WS2 nanostructures. The synthetic details and structural features of these materials are considered. Considerable attention is paid to targeted functionalization of molybdenum and tungsten disulfide nanostructures and to fundamental principles that underlie their ability to chemical interactions. The functional properties and applications of the obtained materials are described.

The bibliography includes 183 references.

Ag nanoparticle decorated molybdenum oxide structures: growth, characterization, DFT studies and their application to enhanced field emission

We report a simple single step growth of α-MoO₃ structures and energetically suitable site specific Ag nanoparticle (NP) decorated α-MoO₃ structures on varied substrates, having almost similar morphologies and oxygen vacancies. We elucidate possible growth mechanisms in light of experimental findings and density functional theory (DFT) calculations. We experimentally establish and verified by DFT calculations that the MoO₃(010) surface is a weakly interacting and stable surface compared to other orientations. From DFT study, the binding energy is found to be higher for (100) and (001) surfaces (∼-0.98 eV), compared to the (010) surface (∼-0.15 eV) and thus it is likely that Ag NP formation is not favorable on the MoO₃(010) surface. The Ag decorated MoO₃ (Ag-MoO₃) nanostructured sample shows enhanced field emission properties with an approimately 2.1 times lower turn-on voltage of 1.67 V μm^-1 and one order higher field enhancement factor (β) of 8.6 × 10⁴ compared to the MoO₃ sample without Ag incorporation. From Kelvin probe force microscopy measurements, the average local work function (Φ) is found to be approximately 0.47 eV smaller for the Ag-MoO₃ sample (∼5.70 ± 0.05 eV) compared to the MoO₃ sample (∼6.17 ± 0.05 eV) and the reduction in Φ can be attributed to the shifting Fermi level of MoO₃ toward vacuum via electron injection from Ag NPs to MoO₃. The presence of oxygen vacancies together with Ag NPs lead to the highest β and lowest turn-on field among the reported values under the MoO₃ emitter category.

Pincushion of Tubule Discovery and Tubular Morphology Landscape Establishment of Block Copolymer Self-Assemblies

Block copolymer (BCP) self-assembly is a versatile technique in the preparation of polymeric aggregates with varieties of morphologies. However, its morphology library is limited. Here, the discovery of pincushion of tubules is reported for the first time, via BCP self-assembly of poly(4-vinylpyridine)-b-polystyrene (P4VP-b-PS) with very high molecular weight (500 kDa) and asymmetry (2 mol% P4VP). The investigation confirms the importance of core-forming block length on morphology control of BCP self-assemblies, especially with respect to tubular structures. The morphology landscape of tubular structures is successfully established, where dumbbell of tubule, tubule, loose clew of tubules, tight clew of tubules, and pincushion of tubules can be prepared by adjusting the core-forming block length. This work therefore expands the structure library of BCP self-assemblies and opens up a new avenue for the further applications of these tubular materials.

Characterization of hierarchical α-MoO3 plates toward resistive heating synthesis: electrochemical activity of α-MoO3/Pt modified electrode toward methanol oxidation at neutral pH

The growth of MoO₃ hierarchical plates was obtained by direct resistive heating of molybdenum foils at ambient pressure in the absence of any catalysts and templates. Plates synthesized after 60 min resistive heating typically grow in an single-crystalline orthorhombic structure that develop preferentially in the [001] direction, and are characterized by high resolution transmission electron microscopy, selected area diffraction pattern and Raman-scattering measurements. They are about 100-200 nm in thickness and a few tens of micrometers in length. As heating time proceeds to 80 min, plates of α-MoO₃ form a branched structure. A more attentive look shows that primary plates formed at until 60 min could serve as substrates for the subsequent growth of secondary belts. Moreover, a full electrochemical characterization of α-MoO₃ plates on platinum electrodes was done by cyclic voltammetric experiments, at pH 7 in phosphate buffer, to probe the activity of the proposed composite material as anode to methanol electro-oxidation. Reported results indicate that Pt MoO₃ modified electrodes are appropriate to develop new an amperometric non-enzymatic sensor for methanol as well as to make anodes suitable to be used in direct methanol fuel cells working at neutral pH.

Fabrication of a silica/titania hollow nanorod and its electroresponsive activity

In this study, a 1D oriented hollow SiO₂/TiO₂ (HST) rod-like material was successfully fabricated via a sequential combination of sol–gel use, TiO₂ incorporation, and a sonication-mediated etching and redeposition method.

Expanding the morphology library of block copolymer self-assemblies with clews of tubules

Clews of tubules are reported via block copolymer self-assembly of P4VP-b-PS with both high asymmetry and very high molecular weight.

Methyl-functionalized MoS2 nanosheets with reduced lattice breathing for enhanced pseudocapacitive sodium storage

Methyl-functionalized MoS₂ (M-MoS₂) nanosheets have been synthesized via a facile second solvothermal method.

CeO2-modified α-MoO3 nanorods as a synergistic support for Pt nanoparticles with enhanced COads tolerance during methanol oxidation

A new type of Ce-doped α-MoO₃ (Ce_0.2Mo_0.8O_3−δ) nanorod support was synthesized using a two-step hydrothermal method.

Versatile Method to Expand the Morphology Library of Block Copolymer Solution Self-Assemblies with Tubular Structures

Self-assembly of block copolymers (BCPs) in solution is a powerful technology to achieve a broad range of structures, such as spheres, cylinders, vesicles, and other hierarchical structures. However, the BCP self-assembly library is limited, especially with respect to tubular structures. Here we show a versatile strategy to expand the morphology library of block copolymer solution self-assemblies with tubular structures (including tubular dumbbells and tubules) via self-assembly of the most common diblock copolymers P4VP-b-PS BCPs in methanol. No special chemistry is needed in this strategy, which proves the universality of this method. The novelty of the strategy is to keep the BCPs both highly asymmetric and with very high molecular weight. The underlying formation mechanism and kinetics of these tubular structures were elucidated. The prepared tubular structures expand the structure library of BCP solution self-assemblies and open up a new avenue for the further applications of a variety of tubular materials.

Flexible Transparent Molybdenum Trioxide Nanopaper for Energy Storage

A flexible transparent molybdenum trioxide nanopaper, assembled via ultralong molybdenum trioxide nanobelts, displays an excellent average transmittance of ≈90% in the visible region. The free-standing nanopaper electrode delivers an outstanding specific capacitance of 1198 F g(-1) and shows an excellent long-term stability performance over 20 000 cycles with a retention rate of 99.1%.

Large-scale synthesis of ultrathin tungsten oxide nanowire networks: an efficient catalyst for aerobic oxidation of toluene to benzaldehyde under visible light

As a very important chemical raw material, the selective formation of benzaldehyde from toluene at preparative or industrial levels requires the use of highly corrosive chlorine and high reaction temperatures, which severely corrodes equipment, pollutes the environment, and consumes a lot of energy. Herein, we report a robust and highly active catalyst for the benzaldehyde evolution reaction that is constructed by the surfactant-free growth of oxygen vacancy-rich W18O49 ultrathin nanowire networks. Under atmospheric pressure and visible-light irradiation, the new catalyst can selectively (92% selectivity) catalyze the aerobic oxidation of toluene to benzaldehyde with yields of above 95%.

Porous MoO2 Nanosheets as Non-noble Bifunctional Electrocatalysts for Overall Water Splitting

A porous MoO2 nanosheet as an active and stable bifunctional electrocatalyst for overall water splitting, is presented. It needs a cell voltage of only about 1.53 V to achieve a current density of 10 mA cm(-2) and maintains its activity for at least 24 h in a two-electrode configuration.

Solution synthesis protocols for shaping mixed valent oxide crystalline particles as robust catalytic materials

Recent progress in the solution based shape controlled synthesis of several typical mixed valent oxides which have been used as highly efficient catalytic nanomaterials in some heterogeneous and photocatalytic reactions has been reviewed.

Simple synthesis of MoO2/carbon aerogel anodes for high performance lithium ion batteries from seaweed biomass

We present a simple and eco-friendly method to synthesize MoO₂/carbon aerogel anodes using alginate as the carbon precursor.

Single MoO3 nanoribbon waveguides: good building blocks as elements and interconnects for nanophotonic applications

Exploring new nanowaveguide materials and structures is of great scientific interest and technological significance for optical and photonic applications. In this work, high-quality single-crystal MoO₃ nanoribbons (NRs) are synthesized and used for optical guiding. External light sources are efficiently launched into the single MoO₃ NRs using silica fiber tapers. It is found that single MoO₃ NRs are as good nanowaveguides with loss optical losses (typically less than 0.1 dB/μm) and broadband optical guiding in the visible/near-infrared region. Single MoO₃ NRs have good Raman gains that are comparable to those of semiconductor nanowaveguides, but the second harmonic generation efficiencies are about 4 orders less than those of semiconductor nanowaveguides. And also no any third-order nonlinear optical effects are observed at high pump power. A hybrid Fabry-Pérot cavity containing an active CdSe nanowire and a passive MoO₃ NR is also demonstrated, and the ability of coupling light from other active nanostructures and fluorescent liquid solutions has been further demonstrated. These optical properties make single MoO₃ NRs attractive building blocks as elements and interconnects in miniaturized photonic circuitries and devices.

General synthesis of inorganic single-walled nanotubes

The single-walled nanotube (SWNT) is an interesting nanostructure for fundamental research and potential applications. However, very few inorganic SWNTs are available to date due to the lack of efficient fabrication methods. Here we synthesize four types of SWNT: sulfide; hydroxide; phosphate; and polyoxometalate. Each type of SWNT possesses essentially uniform diameters. Detailed studies illustrate that the formation of SWNTs is initiated by the self-coiling of the corresponding ultrathin nanostructure embryo/building blocks on the base of weak interactions between them, which is not limited to specific compounds or crystal structures. The interactions between building blocks can be modulated by varying the solvents used, thus multi-walled tubes can also be obtained. Our results reveal that the generalized synthesis of inorganic SWNTs can be achieved by the self-coiling of ultrathin building blocks under the proper weak interactions.

Single walled nanotubes are promising materials for both fundamental research and advanced applications. Here, the authors develop the synthesis of four types of inorganic single walled nanotube, and show that their formation is initiated by the self-coiling of their ultrathin building blocks.

Crystal facet tailoring arts in perovskite oxides

This review highlights various facet tailoring arts in perovskite structure oxides.