Phosphate Diester and DNA Hydrolysis by a Multivalent, Nanoparticle-Based Catalyst

Au24Cd Nanoenzyme Coating for Enhancing Electrochemical Sensing Performance of Metal Wire Microelectrodes

Dopamine (DA), ascorbic acid (AA), and uric acid (UA) are crucial neurochemicals, and their abnormal levels are involved in various neurological disorders. While electrodes for their detection have been developed, achieving the sensitivity required for in vivo applications remains a challenge. In this study, we proposed a synthetic Au24Cd nanoenzyme (ACNE) that significantly enhanced the electrochemical performance of metal electrodes. ACNE-modified electrodes demonstrated a remarkable 10-fold reduction in impedance compared to silver microelectrodes. Furthermore, we validated their excellent electrocatalytic activity and sensitivity using five electrochemical detection methods, including cyclic voltammetry, differential pulse voltammetry, square-wave pulse voltammetry, normal pulse voltammetry, and linear scanning voltammetry. Importantly, the stability of gold microelectrodes (Au MEs) modified with ACNEs was significantly improved, exhibiting a 30-fold enhancement compared to Au MEs. This improved performance suggests that ACNE functionalization holds great promise for developing micro-biosensors with enhanced sensitivity and stability for detecting small molecules.

Artificial Processive Catalytic Systems

Processive catalysts remain attached to a substrate and perform multiple rounds of catalysis. They are abundant in nature. This review highlights artificial processive catalytic systems, which can be divided into (A) catalytic rings that move along a polymer chain, (B) catalytic pores that hold polymer chains and decompose them, (C) catalysts that remain attached to and move around a cyclic substrate via supramolecular interactions, and (D) anchored catalysts that remain in contact with a substrate via multiple catalytic interactions (see frontispiece).

Hydrolytic nanozymes: Preparation, properties, and applications

Hydrolytic nanozymes, as promising alternatives to hydrolytic enzymes, can efficiently catalyze the hydrolysis reactions and overcome the operating window limitations of natural enzymes. Moreover, they exhibit several merits such as relatively low cost, easier recovery and reuse, improved operating stability, and adjustable catalytic properties. Consequently, they have found relevance in practical applications such as organic synthesis, chemical weapon degradation, and biosensing. In this review, we highlight recent works addressing the broad topic of the development of hydrolytic nanozymes. We review the preparation, properties, and applications of six types of hydrolytic nanozymes, including AuNP-based nanozymes, polymeric nanozymes, surfactant assemblies, peptide assemblies, metal and metal oxide nanoparticles, and MOFs. Last, we discuss the remaining challenges and future directions. This review will stimulate the development and application of hydrolytic nanozymes.

C-176 loaded Ce DNase nanoparticles synergistically inhibit the cGAS-STING pathway for ischemic stroke treatment

The neuroinflammatory responses following ischemic stroke cause irreversible nerve cell death. Cell free-double strand DNA (dsDNA) segments from ischemic tissue debris are engulfed by microglia and sensed by their cyclic GMP-AMP synthase (cGAS), which triggers robust activation of the innate immune stimulator of interferon genes (STING) pathway and initiate the chronic inflammatory cascade. The decomposition of immunogenic dsDNA and inhibition of the innate immune STING are synergistic immunologic targets for ameliorating neuroinflammation. To combine the anti-inflammatory strategies of STING inhibition and dsDNA elimination, we constructed a DNase-mimetic artificial enzyme loaded with C-176. Nanoparticles are self-assembled by amphiphilic copolymers (P[CL₃₅-b-(OEGMA_20.7-co-NTAMA_14.3)]), C-176, and Ce⁴⁺ which is coordinated with nitrilotriacetic acid (NTA) group to form corresponding catalytic structures. Our work developed a new nano-drug that balances the cGAS-STING axis to enhance the therapeutic impact of stroke by combining the DNase-memetic Ce⁴⁺ enzyme and STING inhibitor synergistically. In conclusion, it is a novel approach to modulating central nervus system (CNS) inflammatory signaling pathways and improving stroke prognosis.

Peptide/Nanoparticle Biointerfaces for Multistep Tandem Catalysis

The realization of multifunctional nanoparticle systems is essential to achieve highly efficient catalytic materials for specific applications; however, their production remains quite challenging. They are typically achieved through the incorporation of multiple inorganic components; however, incorporation of functionality could also be achieved at the organic ligand layer. In this work, we demonstrate the generation of multifunctional nanoparticle catalysts using peptide-based ligands for tandem catalytic functionality. To this end, chimeric peptides were designed that incorporated a Au binding sequence and a catalytic sequence that can drive ester hydrolysis. Using this chimera, Au nanoparticles were prepared, which sufficiently presented the catalytic domain of the peptide to drive tandem catalytic processes occurring at the peptide ligand layer and the Au nanoparticle surface. This work represents unique pathways to achieve multifunctionality from nanoparticle systems tuned by both the inorganic and bio/organic components, which could be highly important for applications beyond catalysis, including theranostics, sensing, and energy technologies.

On-nanoparticle monolayers as a solute-specific, solvent-like phase

In addition to modifying surface properties, self-assembled monolayers, SAMs, on nanoparticles can selectively incorporate small molecules from the surrounding solution. This selectivity has been used in the design of substrate-specific catalytic systems but its degree has not been quantified. This work uses catalytic centers embedded in on-nanoparticle hydrophobic SAMs to monitor and quantify the partitioning of molecules between the bulk solvent and these monolayers. A combination of experiments and theory allows us to relate the logarithm of the incorporation-into-SAM constant to the "bulk" log P values, characterizing the incoming substrates. These results are in line with classic, semi-empirical linear free energy relationships between partitioning solvent systems; in this way, they substantiate the view of nanoscopic on-particle SAMs acting akin to a bulk solvent phase.

Iron(II)-α-keto acid complexes of tridentate ligands on gold nanoparticles: the effect of ligand geometry and immobilization on their dioxygen-dependent reactivity

Two mononuclear nonheme iron(II)-benzoylformate (BF) complexes [(6Me₂-Me-BPA)Fe(BF)](ClO₄) (1a) and [(6Me₃-TPMM)Fe(BF)](ClO₄) (1b) of tridentate nitrogen donor ligands, bis((6-methylpyridin-2-yl)methyl)(N-methyl)amine (6Me₂-Me-BPA) and tris(2-(6-methyl)pyridyl)methoxymethane (6Me₃-TPMM), were isolated and characterized. The structural characterization of iron(II)-chloro complexes indicates that the ligand 6Me₂-Me-BPA binds to the iron(II) centre in a meridional fashion, whereas 6Me₃-TPMM behaves as a facial ligand. Both the ligands were functionalized with terminal thiol for immobilization on gold nanoparticles (AuNPs), and the corresponding iron(II) complexes [(6Me₂-BPASH)Fe(BF)(ClO₄)]@C₈Au (2a) and [(6Me₃-TPMSH)Fe(BF)(ClO₄)]@C₈Au (2b) were prepared to probe the effect of immobilization on their ability to perform bioinspired oxidation reactions. All the complexes react with dioxygen to display the oxidative decarboxylation of the coordinated benzoylformate, but the complexes supported by 6Me₃-TPMM and its thiol-appended ligand display faster reactivity compared to their analogues with the 6Me₂-Me-BPA-derived ligands. In each case, an electrophilic iron-oxygen oxidant was intercepted as the active oxidant generated from dioxygen. The immobilized complexes (2a and 2b) display enhanced O₂-dependent reactivity in oxygen-atom transfer reactions (OAT) and hydrogen-atom transfer (HAT) reactions compared to their homogeneous congeners (1a and 1b). Furthermore, the immobilized complex 2b displays catalytic OAT reactions. This study supports that the ligand geometry and immobilization on AuNPs influence the dioxygen-dependent reactivity of the complexes.

Proving Cooperativity of a Catalytic Reaction by Means of Nanoscale Geometry: The Case of Click Reaction

Establishing whether a reaction is catalyzed by a single-metal catalytic center or cooperatively by a fleeting complex encompassing two such centers may be an arduous pursuit requiring detailed kinetic, isotopic, and other types of studies─as illustrated, for instance, by over a decade-long work on single-copper versus di-copper mechanisms of the popular "click" reaction. This paper describes a method to interrogate such cooperative mechanisms by a nanoparticle-based platform in which the probabilities of catalytic units being proximal can be varied systematically and, more importantly, independently of their volume concentration. The method relies on geometrical considerations rather than a detailed knowledge of kinetic equations, yet the scaling trends it yield can distinguish between cooperative and non-cooperative mechanisms.

Construction of DNA ligase-mimicking nanozymes via molecular imprinting

Enzyme mimics are of significant importance due to their facile preparation, low cost and stability to rigorous environment. Molecularly imprinted polymers (MIPs) have been important synthetic mimics of enzymes. However,...

Homodinuclear copper(II) and zinc(II) complexes of a carboxylate-rich ligand as synthetic mimics of phosphoester hydrolase in aqueous solutions

The synthesis, characterization and catalytic activities of two homodinuclear Cu(II) and Zn(II) complexes of a carboxylate-rich ligand, N,N'-Bis[2-carboxybenzomethyl]-N,N' -Bis[carboxymethyl]-1,3-diaminopropan-2-ol (H₅ccdp) ligand towards the hydrolysis of (p-nitrophenyl phosphate) (PNPP) and bis(p-nitrophenyl) phosphate (BNPP) substrates in aqueous systems are described. Kinetic investigations were carried out using UV-Vis spectrophotometric techniques at 25 °C and 37 °C and different pH (7-10) conditions. The kinetic studies revealed that the turnover rate (k_cat) values among the PNPP hydrolysis systems, the highest and the lowest k_cat values were displayed by [Cu₂(ccdp)(μ-OAc)]^2- at 2.34 × 10^-6 s^-1 (pH 8 and 37 °C) and 2.13 × 10^-8 s^-1 (pH 8 and 25 °C), respectively. However, similar comparisons among the BNPP hydrolysis revealed that highest and the lowest k_cat values were displayed by [Zn₂(ccdp)(μ-OAc)]^2- at 4.64 × 10^-8 s^-1 (pH 9 and 37 °C) and 2.38 × 10^-9 (pH 9 and 25 °C). Significantly enough, the catalyst-substrate adduct species containing a metal bound PNPP and BNPP have been detected by ESI-MS techniques. Additionally, a PNPP-bound copper complex has been isolated and crystalized using single crystal X-ray diffraction technique. Based on the structural and activity information obtained in this study, reaction mechanisms for the hydrolysis of PNPP have been proposed.

Hydrolytic cleavage of nerve agent simulants by gold nanozymes

Although banned by the Chemical Weapons Convention, organophosphorus nerve agents are still available and have been used in regional wars, terroristic attacks or for other crtaiminal purposes. Their degradation is of primary importance for the severe toxicity of these compounds. Here we report that gold nanoparticles passivated with thiolated molecules bearing 1,3,7-triazacyclononane and 1,3,7,10-tetraazacyclododecane ligands efficiently hydrolyze nerve agents simulants p-nitrophenyl diphenyl phosphate and methylparaoxon as transition metal complexes at 25 °C and pH 8 with half-lives of the order of a few minutes. Mechanistically, these catalysts show an enzyme-like behavior, hence they constitute an example of nanozymes. The catalytic site appears to involve a single metal ion and its recognition of the substrates is driven mostly by hydrophobic interactions. The ease of preparation and the mild conditions at which they operate, make these nanozymes appealing catalysts for the detoxification after contamination with organophosphorus nerve agents, particularly those poorly soluble in water.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

Preparation, Functionalization, Modification, and Applications of Nanostructured Gold: A Critical Review

Gold nanoparticles (Au NPs) play a significant role in science and technology because of their unique size, shape, properties and broad range of potential applications. This review focuses on the various approaches employed for the synthesis, modification and functionalization of nanostructured Au. The potential catalytic applications and their enhancement upon modification of Au nanostructures have also been discussed in detail. The present analysis also offers brief summaries of the major Au nanomaterials synthetic procedures, such as hydrothermal, solvothermal, sol-gel, direct oxidation, chemical vapor deposition, sonochemical deposition, electrochemical deposition, microwave and laser pyrolysis. Among the various strategies used for improving the catalytic performance of nanostructured Au, the modification and functionalization of nanostructured Au produced better results. Therefore, various synthesis, modification and functionalization methods employed for better catalytic outcomes of nanostructured Au have been summarized in this review.

R, Sissi C, Pecina A, Riccardi L, De Vivo M, Mancin F, Scrimin P. A Gold Nanoparticle Nanonuclease Relying on a Zn(II) Mononuclear Complex

Similarly to enzymes, functionalized gold nanoparticles efficiently catalyze chemical reactions, hence the term nanozymes. Herein, we present our results showing how surface-passivated gold nanoparticles behave as synthetic nanonucleases, able to cleave pBR322 plasmid DNA with the highest efficiency reported so far for catalysts based on a single metal ion mechanism. Experimental and computational data indicate that we have been successful in creating a catalytic site precisely mimicking that suggested for natural metallonucleases relying on a single metal ion for their activity. It comprises one Zn(II) ion to which a phosphate diester of DNA is coordinated. Importantly, as in nucleic acids-processing enzymes, a positively charged arginine plays a key role by assisting with transition state stabilization and by reducing the pKa of the nucleophilic alcohol of a serine. Our results also show how designing a catalyst for a model substrate (bis-p-nitrophenylphosphate) may provide wrong indications as for its efficiency when it is tested against the real target (plasmid DNA).

Binuclear metal complexes with a novel hexadentate imidazole derivative for the cleavage of phosphate diesters and biomolecules: distinguishable mechanisms

Oxidative cleavage of phosphate diesters (HPNP, BNPP) is highly faster than the hydrolytic one by binuclear metal complexes with novel imidazole derivative, producing a non-lactone phosphate monoester due to the direct attack of free radicals.

Enzyme Mimic Nanomaterials and Their Biomedical Applications

Nanomaterials with enzyme-mimicking behavior (nanozymes) have attracted a lot of research interest recently. In comparison to natural enzymes, nanozymes hold many advantages, such as good stability, ease of production and surface functionalization. As the catalytic mechanism of nanozymes is gradually revealed, the application fields of nanozymes are also broadly explored. Beyond traditional colorimetric detection assays, nanozymes have been found to hold great potential in a variety of biomedical fields, such as tumor theranostics, antibacterial, antioxidation and bioorthogonal reactions. In this review, we summarize nanozymes consisting of different nanomaterials. In addition, we focus on the catalytic performance of nanozymes in biomedical applications. The prospects and challenges in the practical use of nanozymes are discussed at the end of this Minireview.

Cleaving DNA by nanozymes

Various nanomaterials can mimic the activities of nucleases for hydrolytic and oxidative DNA cleavage on different sites allowing interesting biomedical and bioanalytical applications.

Factors Influencing the Activity of Nanozymes in the Cleavage of an RNA Model Substrate

A series of 2-nm gold nanoparticles passivated with different thiols all featuring at least one triazacyclonanone-Zn(II) complex and different flanking units (a second Zn(II) complex, a triethyleneoxymethyl derivative or a guanidinium of arginine of a peptide) were prepared and studied for their efficiency in the cleavage of the RNA-model substrate 2-hydroxypropyl-p-nitrophenyl phosphate. The source of catalysis for each of them was elucidated from the kinetic analysis (Michaelis–Menten profiles, pH dependence and kinetic isotope effect). The data indicated that two different mechanisms were operative: One involving two Zn(II) complexes and the other one involving a single Zn(II) complex and a flanking guanidinium cation. The mechanism based on a dinuclear catalytic site appeared more efficient than the one based on the cooperativity between a metal complex and a guanidinium.

Aggregation induced emission of amino-thiol capped gold nanoparticles (GNPs) through metal-amino-coordination

Au₁₁(SG)₇ gold nanoparticles (GNPs) were synthesized from HAuCl₄ using thiol compounds containing an amino group to serve as both the reducing agent and the ligand. A three-dimensional network structure (…Au-SNH₂→Mⁿ⁺⟵H₂NS-Au…) was formed after the Mⁿ⁺ (Pb²⁺, Cd²⁺, Zn²⁺ and Ag⁺) coordinated the gold nanoparticles through the amino group in the thiol ligand, which promoted aurophilicity (…Au…Au…) and induced GNP aggregation and emission. The differences in coordination between the amino group and metal ions resulted in different emission wavelengths (Pb²⁺, Cd²⁺, Zn²⁺ and Ag⁺: λ_ex = 365 nm˜370 nm, λ_em = 580, 645, 630 and 565 nm). Aggregation induced emission of amino thiol capped GNPs via coordination of Pb²⁺ or Cd²⁺ can be used as a fluorescent sensor of the both metal ions (λ_ex = 365 nm, λ_em = 580/645 nm) and were used for living bioimaging in vivo and in vitro.

The Zn(II)-1,4,7-Trimethyl-1,4,7-Triazacyclononane Complex: A Monometallic Catalyst Active in Two Protonation States

In this paper, the unusual reactivity of the complex Zn(II)-1,4,7-trimethyl-1, 4,7-triazacyclononane (2) in the transesterification of the RNA-model substrate, HPNP (3), is reported. The dependence of the reactivity (k₂) with pH does not follow the characteristic bell-shape profile typical of complexes with penta-coordinated metal centers. By the contrary, two reactive species, featuring different deprotonation states, are present, with the tri-aqua complex being more reactive than the mono-hydroxy-diaqua one. Apparently, such a difference arises from the total complex charge which plays an important role in the stability of the transition state/s of the reactions. Relevant insight on the reaction mechanism were hence obtained.

Cleaving DNA-model phosphodiester with Lewis acid-base catalytic sites in bifunctional Zr-MOFs

Organophosphates exist in many biomolecules. The design of artificial nucleases for efficient P-O bond cleavage is essential for the fields of genetic engineering and molecular biology. Herein, metal-organic frameworks (MOFs) with cooperatively isolated multi-catalytic active sites were utilized as heterogeneous catalysts for the hydrolytic cleavage of bis(p-nitrophenyl) phosphate (BNPP).

Predicting the effect of chain-length mismatch on phase separation in noble metal nanoparticle monolayers with chemically mismatched ligands

Nanoparticles (NPs) protected with a ligand monolayer hold promise for a wide variety of applications, from photonics and catalysis to drug delivery and biosensing. Monolayers that include a mixture of ligand types can have multiple chemical functionalities and may also self-assemble into advantageous patterns. Previous work has shown that both chemical and length mismatches among these surface ligands influence phase separation. In this work, we examine the interplay between these driving forces, first by using our previously-developed configurationally-biased Monte Carlo (CBMC) algorithm to predict, then by using our matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS) technique to experimentally probe, the surface morphologies of a series of two-ligand mixtures on the surfaces of ultrasmall silver NPs. Specifically, we examine three such mixtures, each of which has the same chemical mismatch (consisting of a hydrophobic alkanethiol and a hydrophilic mercapto-alcohol), but varying degrees of chain-length mismatch. This delicate balance between chemical and length mismatches provides a challenging test for our CBMC prediction algorithm. Even so, the simulations are able to quantitatively predict the MALDI-MS results for all three ligand mixtures, while also providing atomic-scale details from the equilibrated ligand structures, such as patch sizes and co-crystallization patterns. The resulting monolayer morphologies range from randomly-mixed to Janus-like, demonstrating that chain-length modifications are an effective way to tune monolayer morphology without needing to alter chemical functionalities.

Oxidizing Ability of a Dioxygen-Activating Nonheme Iron(II)-Benzilate Complex Immobilized on Gold Nanoparticles

An iron(II)-benzilate complex [(TPASH)Fe^II(benzilate)]ClO₄@C₈Au (2) (TPASH = 11-((6-((bis(pyridin-2-ylmethyl)amino)methyl)pyridin-2-yl)methoxy)undecane-1-thiol) immobilized on octanethiol stabilized gold nanoparticles (C₈Au) of core diameter less than 5 nm has been prepared to evaluate its reactivity toward O₂-dependent oxidations compared to a nonimmobilized complex [(TPA-O-Allyl)Fe^II(benzilate)]ClO₄ (1a) (TPA-O-Allyl = N-((6-(allyloxymethyl)pyridin-2-yl)methyl)(pyridin-2-yl)- N-(pyridin-2-ylmethyl)methanamine). X-ray crystal structure of the nonimmobilized complex 1a reveals a six-coordinate iron(II) center in which the TPA-O-Allyl acts as a pentadentate ligand and the benzilate anion binds in monodentate fashion. Both the complexes (1a and 2) react with dioxygen under ambient conditions to form benzophenone as the sole product through decarboxylation of the coordinated benzilate. Interception studies reveal that a nucleophilic iron-oxygen intermediate is formed in the decarboxylation reaction. The oxidants from both the complexes are able to carry out oxo atom transfer reactions. The immobilized complex 2 not only performs faster decarboxylation but also exhibits enhanced reactivity in oxo atom transfer to sulfides. Importantly, the immobilized complex 2, unlike 1a, displays catalytic turnovers in sulfide oxidation. However, the complexes are not efficient to carry out cis-dihydroxylation of alkenes. Although the immobilized complex yields a slightly higher amount of cis-diol from 1-octene, restricted access of dioxygen and substrates at the coordinatively saturated metal centers of the complexes likely makes the resulting iron-oxygen species less active in oxygen atom transfer to alkenes. The results implicate that surface immobilized nonheme iron complexes containing accessible coordination sites would exhibit better reactivity in O₂-dependent oxygenation reactions.

Catalytic Hydrolysis of Phosphate Monoester by Supramolecular Phosphatases Formed from a Monoalkylated Dizinc(II) Complex, Cyclic Diimide Units, and Copper(II) in Two-Phase Solvent System

Design and synthesis of enzyme mimic with programmed molecular interaction among several building blocks including metal complexes and metal chelators is of intellectual and practical significance. The preparation of artificial enzymes that mimic the natural enzymes such as hydrolases, phosphatases, etc. remains a great challenge in the field of supramolecular chemistry. Herein we report on the design and synthesis of asymmetric (nonsymmetric) supermolecules by the 2:2:2 self-assembly of an amphiphilic zinc(II)-cyclen complex containing a 2,2'-bipyridyl linker and one long alkyl chain (Zn₂L³), barbital analogues, and Cu²⁺ as model compounds of an enzyme alkaline phosphatase that catalyzes the hydrolysis of phosphate monoesters such as mono(4-nitrophenyl)phosphate at neutral pH in two-phase solvent system (H₂O/CHCl₃) in pH 7.4 and 37 °C. Hydrolytic activity of these complexes was found to be catalytic, and their catalytic turnover numbers are 3-4. The mechanistic studies based on the UV/vis and emission spectra of the H₂O and CHCl₃ phases of the reaction mixtures suggest that the hydrophilicity/hydrophobicity balance of the supramolecular catalysts is an important factor for catalytic activity.

Effects of the Metal Ion on the Mechanism of Phosphodiester Hydrolysis Catalyzed by Metal-Cyclen Complexes

In this study, mechanisms of phosphodiester hydrolysis catalyzed by six di- and tetravalent metal-cyclen (M-C) complexes (Zn-C, Cu-C, Co-C, Ce-C, Zr-C and Ti-C) have been investigated using DFT calculations. The activities of these complexes were studied using three distinct mechanisms: (1) direct attack ( DA ), (2) catalyst-assisted ( CA ), and (3) water-assisted ( WA ). All divalent metal complexes (Zn-C, Cu-C and Co-C) coordinated to the BNPP substrate in a monodentate fashion and activated its scissile phosphoester bond. However, all tetravalent metal complexes (Ce-C, Zr-C, and Ti-C) interacted with BNPP in a bidentate manner and strengthened this bond. The DA mechanism was energetically the most feasible for all divalent M-C complexes, while the WA mechanism was favored by the tetravalent complexes, except Ce-C. The divalent complexes were found to be more reactive than their tetravalent counterparts. Zn-C catalyzed the hydrolysis with the lowest barrier among all M-C complexes, while Ti-C was the most reactive tetravalent complex. The activities of Ce-C and Zr-C, except Ti-C, were improved with an increase in the coordination number of the metal ion. The structural and mechanistic information provided in this study will be very helpful in the development of more efficient metal complexes for this critical reaction.

Nanomaterials with enzyme-like characteristics (nanozymes): next-generation artificial enzymes (II)

An updated comprehensive review to help researchers understand nanozymes better and in turn to advance the field.

Computational and Experimental Investigation of Janus-like Monolayers on Ultrasmall Noble Metal Nanoparticles

Detection of monolayer morphology on nanoparticles smaller than 10 nm has proven difficult with traditional visualization techniques. Here matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) is used in conjunction with atomistic simulations to detect the formation of Janus-like monolayers on noble metal nanoparticles. Silver metal nanoparticles were synthesized with a monolayer consisting of dodecanethiol (DDT) and mercaptoethanol (ME) at varying ratios. The nanoparticles were then analyzed using MALDI-MS, which gives information on the local ordering of ligands on the surface. The MALDI-MS analysis showed large deviations from random ordering, suggesting phase separation of the DDT/ME monolayers. Atomistic Monte Carlo (MC) calculations were then used to simulate the nanoscale morphology of the DDT/ME monolayers. In order to quantitatively compare the computational and experimental results, we developed a method for determining an expected MALDI-MS spectrum from the atomistic simulation. Experiments and simulations show quantitative agreement, and both indicate that the DDT/ME ligands undergo phase separation, resulting in Janus-like nanoparticle monolayers with large, patchy domains.

Unraveling the Enzymatic Activity of Oxygenated Carbon Nanotubes and Their Application in the Treatment of Bacterial Infections

Carbon nanotubes (CNTs) and their derivatives have emerged as a series of efficient biocatalysts to mimic the function of natural enzymes in recent years. However, the unsatisfiable enzymatic efficiency usually limits their practical usage ranging from materials science to biotechnology. Here, for the first time, we present the synthesis of several oxygenated-group-enriched carbon nanotubes (o-CNTs) via a facile but green approach, as well as their usage as high-performance peroxidase mimics for biocatalytic reaction. Exhaustive characterizations of the enzymatic activity of o-CNTs have been provided by exploring the accurate effect of various oxygenated groups on their surface including carbonyl, carboxyl, and hydroxyl groups. Because of the "competitive inhibition" effect among all of these oxygenated groups, the catalytic efficiency of o-CNTs is significantly enhanced by weakening the presence of noncatalytic sites. Furthermore, the admirable enzymatic activity of these o-CNTs has been successfully applied in the treatment of bacterial infections, and the results of both in vitro and in vivo nanozyme-mediated bacterial clearance clearly demonstrate the feasibility of o-CNTs as robust peroxidase mimics to effectively decrease the bacterial viability under physiological conditions. We believe that the present study will not only facilitate the construction of novel efficient nanozymes by rationally adjusting the degree of the "competitive inhibition" effect, but also broaden the biological usage of o-CNT-based nanomaterials via their satisfactory enzymatic activity.

Detection and identification of designer drugs by nanoparticle-based NMR chemosensing

Properly designed monolayer-protected nanoparticles (2 nm core diameter) can be used as nanoreceptors for selective detection and identification of phenethylamine derivatives (designer drugs) in water. The molecular recognition mechanism is driven by the combination of electrostatic and hydrophobic interactions within the coating monolayer. Each nanoparticle can bind up to 30-40 analyte molecules. The affinity constants range from 105 to 106 M-1 and are modulated by the hydrophobicity of the aromatic moiety in the substrate. Detection of drug candidates (such as amphetamines and methamphetamines) is performed by using magnetization (NOE) or saturation (STD) transfer NMR experiments. In this way, the NMR spectrum of the drug is isolated from that of the mixture, allowing broad-class multianalyte detection and even identification of unknowns. The introduction of a dimethylsilane moiety in the coating monolayer allows performing STD experiments in complex mixtures. In this way, a detection limit of 30 μM is reached with standard instruments.

Catalytic signal amplification for the discrimination of ATP and ADP using functionalised gold nanoparticles

Diagnostic assays that incorporate a signal amplification mechanism permit the detection of analytes with enhanced selectivity. Herein, we report a gold nanoparticle-based chemical system able to differentiate ATP from ADP by means of catalytic signal amplification. The discrimination between ATP and ADP is of relevance for the development of universal assays for the detection of enzymes which consume ATP. For example, protein kinases are a class of enzymes critical for the regulation of cellular functions, and act to modulate the activity of other proteins by transphosphorylation, transferring a phosphate group from ATP to give ADP as a byproduct. The system described here exploits the ability of cooperative catalytic head groups on gold nanoparticles to very efficiently catalyze chromogenic reactions such as the transphosphorylation of 2-hydroxypropyl-4-nitrophenyl phosphate (HPNPP). A series of chromogenic substrates have been synthesized and evaluated by means of Michaelis-Menten kinetics (compounds 2, 4-6). 2-Hydroxypropyl-(3-trifluoromethyl-4-nitro)phenyl phosphate (5) was found to display higher reactivity (kcat) and higher binding affinity (KM) when compared to HPNPP. This higher binding affinity allows phosphate 5 to compete with ATP and ADP to different extents for binding on the monolayer surface, thus enabling a catalytically amplified signal only when ATP is absent. Overall, this represents a viable new approach for monitoring the conversion of ATP into ADP with high sensitivity.

Zinc(ii) complexes with uncommon aminal and hemiaminal ether derivatives: synthesis, structure, phosphatase activity and theoretical rationalization of ligand and complex formation

Zinc(ii)-mediated and anion-controlled unusual Aminal and Hemiaminal Ether Derivative complex formations verified experimentally and rationalized by DFT calculations.

Designing metal-contained enzyme mimics for prodrug activation

Enzyme-activated prodrug therapy (EAPT) is a widely-used and effective treatment method for cancer by converting prodrugs into drugs at the demanded time and space, whose key step is prodrug activation. Traditional prodrug activations are mostly dependent on natural enzymes, which are unstable, expensive and hard to be functionalized. The emerging enzyme mimics, especially the metal-contained enzyme mimics (MEMs), provide a potential chance for improving the traditional EAPT because of their high stability, low cost and easiness of preparation and functionalization. The existing MEMs can be classified into three categories: catalytic core-scaffold MEM (csMEM), nanoparticle MEM (npMEMs) and metal-organic framework (MOF) MEM (mofMEM). These MEMs can mimic diverse functions corresponding to natural enzymes, and some of which are potentially used in prodrug activation, such as DNase, RNase, carbonate esterase, etc. In this review, we briefly summarize the MEMs according to their structure and composition, and highlight the successful and potential applications for prodrug activation mediated by hydrolase-like and oxidoreductase-like MEMs.