Activity, folding and Z-DNA formation of the 8-17 DNAzyme in the presence of monovalent ions

The 8-17 DNAzyme can operate in a single active structure regardless of metal ion cofactor

DNAzymes - synthetic enzymes made of DNA - have long attracted attention as RNA-targeting therapeutic agents. Yet, as of now, no DNAzyme-based drug has been approved, partially due to our lacking understanding of their molecular mode of action. In this work we report the solution structure of 8-17 DNAzyme bound to a Zn2+ ion solved through NMR spectroscopy. Surprisingly, it turned out to be very similar to the previously solved Pb2+-bound form (catalytic domain RMSD = 1.28 Å), despite a long-standing literature consensus that Pb2+ recruits a different DNAzyme fold than other metal ion cofactors. Our follow-up NMR investigations in the presence of other ions - Mg2+, Na+, and Pb2+ - suggest that at DNAzyme concentrations used in NMR all these ions induce a similar tertiary fold. Based on these findings, we propose a model for 8-17 DNAzyme interactions with metal ions postulating the existence of only a single catalytically-active structure, yet populated to a different extent depending on the metal ion cofactor. Our results provide structural information on the 8-17 DNAzyme in presence of non-Pb2+ cofactors, including the biologically relevant Mg2+ ion.

Structurally Specific Z-DNA Proteolysis Targeting Chimera Enables Targeted Degradation of Adenosine Deaminase Acting on RNA 1

Given the prevalent advancements in DNA- and RNA-based PROTACs, there remains a significant need for the exploration and expansion of more specific DNA-based tools, thus broadening the scope and repertoire of DNA-based PROTACs. Unlike conventional A- or B-form DNA, Z-form DNA is a configuration that exclusively manifests itself under specific stress conditions and with specific target sequences, which can be recognized by specific reader proteins, such as ADAR1 or ZBP1, to exert downstream biological functions. The core of our innovation lies in the strategic engagement of Z-form DNA with ADAR1 and its degradation is achieved by leveraging a VHL ligand conjugated to Z-form DNA to recruit the E3 ligase. This ingenious construct engendered a series of Z-PROTACs, which we utilized to selectively degrade the Z-DNA-binding protein ADAR1, a molecule that is frequently overexpressed in cancer cells. This meticulously orchestrated approach triggers a cascade of PANoptotic events, notably encompassing apoptosis and necroptosis, by mitigating the blocking effect of ADAR1 on ZBP1, particularly in cancer cells compared with normal cells. Moreover, the Z-PROTAC design exhibits a pronounced predilection for ADAR1, as opposed to other Z-DNA readers, such as ZBP1. As such, Z-PROTAC likely elicits a positive immunological response, subsequently leading to a synergistic augmentation of cancer cell death. In summary, the Z-DNA-based PROTAC (Z-PROTAC) approach introduces a modality generated by the conformational change from B- to Z-form DNA, which harnesses the structural specificity intrinsic to potentiate a selective degradation strategy. This methodology is an inspiring conduit for the advancement of PROTAC-based therapeutic modalities, underscoring its potential for selectivity within the therapeutic landscape of PROTACs to target undruggable proteins.

Chemically Inducible DNAzyme Sensor for Controllable Imaging of Metal Ions

RNA-cleaving DNAzymes have emerged as a promising tool for metal ion detection. Achieving spatiotemporal control over their catalytic activity is essential for understanding the role of metal ions in various biological processes. While photochemical and endogenous stimuli-responsive approaches have shown potential for controlled metal ion imaging using DNAzymes, limitations such as photocytotoxicity, poor tissue penetration, or off-target activation have hindered their application for safe and precise detection of metal ions in vivo. We herein report a chemically inducible DNAzyme in which the catalytic core is modified to contain chemical caging groups at the selected backbone sites through systematic screening. This inducible DNAzyme exhibits minimal leakage of catalytic activity and can be reactivated by small molecule selenocysteines, which effectively remove the caging groups and restore the activity of DNAzyme. Benefiting from these findings, we designed a fluorogenic chemically inducible DNAzyme sensor for controlled imaging of metal ions with tunable activity and high selectivity in live cells and in vivo. This chemically inducible DNAzyme design expands the toolbox for controlling DNAzyme activity and can be easily adapted to detect other metal ions in vivo by changing the DNAzyme module, offering opportunities for precise biomedical diagnosis.

Metal-dependent activity control of a compact-sized 8-17 DNAzyme based on metal-mediated unnatural base pairing

A compact 8-17 DNAzyme was modified with a CuII-meditated artificial base pair to develop a metal-responsive allosteric DNAzyme. The base sequence was rationally designed based on the reported three-dimensional structure. The activity of the modified DNAzyme was enhanced 5.1-fold by the addition of one equivalent of CuII ions, showing good metal responsiveness. Since it has been challenging to modify compactly folded DNAzymes without losing their activity, this study demonstrates the utility of the metal-mediated artificial base pairing to create stimuli-responsive functional DNAs.

Rapid Kinetics of Pistol Ribozyme: Insights into Limits to RNA Catalysis

Pistol ribozyme (Psr) is a distinct class of small endonucleolytic ribozymes, which are important experimental systems for defining fundamental principles of RNA catalysis and designing valuable tools in biotechnology. High-resolution structures of Psr, extensive structure-function studies, and computation support a mechanism involving one or more catalytic guanosine nucleobases acting as a general base and divalent metal ion-bound water acting as an acid to catalyze RNA 2'-O-transphosphorylation. Yet, for a wide range of pH and metal ion concentrations, the rate of Psr catalysis is too fast to measure manually and the reaction steps that limit catalysis are not well understood. Here, we use stopped-flow fluorescence spectroscopy to evaluate Psr temperature dependence, solvent H/D isotope effects, and divalent metal ion affinity and specificity unconstrained by limitations due to fast kinetics. The results show that Psr catalysis is characterized by small apparent activation enthalpy and entropy changes and minimal transition state H/D fractionation, suggesting that one or more pre-equilibrium steps rather than chemistry is rate limiting. Quantitative analyses of divalent ion dependence confirm that metal aquo ion pK_a correlates with higher rates of catalysis independent of differences in ion binding affinity. However, ambiguity regarding the rate-limiting step and similar correlation with related attributes such as ionic radius and hydration free energy complicate a definitive mechanistic interpretation. These new data provide a framework for further interrogation of Psr transition state stabilization and show how thermal instability, metal ion insolubility at optimal pH, and pre-equilibrium steps such as ion binding and folding limit the catalytic power of Psr suggesting potential strategies for further optimization.

Assessing B-Z DNA Transitions in Solutions via Infrared Spectroscopy

Z-DNA refers to the left-handed double-helix DNA that has attracted much attention because of its association with some specific biological functions. However, because of its low content and unstable conformation, Z-DNA is normally difficult to observe or identify. Up to now, there has been a lack of unified or standard analytical methods among diverse techniques for probing Z-DNA and its transformation conveniently. In this work, NaCl, MgCl₂, and ethanol were utilized to induce d(GC)₈ from B-DNA to Z-DNA in vitro, and Fourier transform infrared (FTIR) spectroscopy was employed to monitor the transformation of Z-DNA under different induction conditions. The structural changes during the transformation process were carefully examined, and the DNA chirality alterations were validated by the circular dichroism (CD) measurements. The Z-DNA characteristic signals in the 1450 cm^-1-900 cm^-1 region of the d(GC)₈ infrared (IR) spectrum were observed, which include the peaks at 1320 cm^-1, 1125 cm^-1 and 925 cm^-1, respectively. The intensity ratios of A₁₃₂₀/A₉₇₀, A₁₁₂₅/A₉₇₀, and A₉₂₅/A₉₇₀ increased with Z-DNA content in the transition process. Furthermore, compared with the CD spectra, the IR spectra showed higher sensitivity to Z-DNA, providing more information about the molecular structure change of DNA. Therefore, this study has established a more reliable FTIR analytical approach to assess BZ DNA conformational changes in solutions, which may help the understanding of the Z-DNA transition mechanism and promote the study of Z-DNA functions in biological systems.

Thiolate DNAzymes on Gold Nanoparticles for Isothermal Amplification and Detection of Mesothelioma-derived Exosomal PD-L1 mRNA

Catalytic DNAzymes have been used for isothermal amplification and rapid detection of nucleic acids, holding the potential for point-of-care testing applications. However, when Subzymes (universal substrate and DNAzyme) are tethered to the polystyrene magnetic microparticles via biotin-streptavidin bonds, the residual free Subzymes are often detached from the microparticle surface, which causes a significant degree of false positives. Here, we attached dithiol-modified Subzyme to gold nanoparticle and improved the limit of detection (LoD) by 200 times compared to that using magnetic microparticles. As a proof of concept, we applied our new method for the detection of exosomal programed cell-death ligand 1 (PD-L1) RNA. As the classical immune checkpoint, molecule PD-L1, found in small extracellular vesicles (sEVs, traditionally called exosomes), can reflect the antitumor immune response for predicting immunotherapy response. We achieved the LoD as low as 50 fM in detecting both the RNA homologous to the PD-L1 gene and exosomal PD-L1 RNAs extracted from epithelioid and nonepithelioid subtypes of mesothelioma cell lines, which only takes 8 min of reaction time. As the first application of isothermal DNAzymes for detecting exosomal PD-L1 RNA, this work suggests new point-of-care testing potentials toward clinical translations.

8-17 DNAzyme Silencing Gene Expression in Cells via Cleavage and Antisense

Gene silencing is an important biological strategy for studying gene functions, exploring disease mechanisms and developing therapeutics. 8-17 DNAzyme is of great potential for gene silencing, due to its higher RNA-cleaving activity. However, it is not generally used in practice, due to its divalent cation dependence and poor understanding of its cellular mechanisms. To address these issues, we have explored its activity in vitro and in cells and found that it can cleave RNA substrates under the simulated physiological conditions, and its gene-silencing activity is additionally enhanced by its RNase H compatibility, offering both cleavage and antisense activities in cells. Further, chemical modifications can facilitate its stability, substrate binding affinity and gene-silencing activity. Our research results suggest that this DNAzyme can demonstrate high levels of activities for both actions in cells, making it a useful tool for exploring biomedical applications.

The role of Na+ in catalysis by the 8-17 DNAzyme

The 8-17 DNAzyme is the most studied deoxyribozyme in terms of its molecular mechanism; hence it has become a model system to understand the basis behind DNA catalysis. New functional studies and the recent attainment of high-resolution X-ray structures, in addition to theoretical calculations have offered a great opportunity to gain a broader comprehension of its mechanism; however many aspects are unclear yet, especially regarding the precise role of metal ions in catalysis. Recently, molecular dynamics simulations have suggested for the first time a specific and dynamical participation of Na⁺ in the mechanism through the reaction pathway, besides the roles proposed for divalent metal cofactors. Herein, we present experimental evidence of a cooperative role of the monovalent cation Na⁺ in catalysis that is in line with these theoretical suggestions. Our findings show a clear influence of the concentration of Na⁺ on the activity of the 8-17 DNAzyme when Pb²⁺ is used as the cofactor. Interestingly, this effect is not noticed with Mg²⁺, indicating a particular contribution of the monovalent ion to catalysis that would operate preferentially with Pb²⁺. We have also found that Na⁺ affects the pK_a of the general base and the general acid, indicating its influence on general acid-base catalysis, already identified as part of the mechanism of the 8-17 DNAzyme. Finally, our results emphasize the need to consider Na⁺ carefully in the design and analysis of functional studies of catalytic DNAs and its possible specific role in their mechanisms.

Biophysical interaction between lanthanum chloride and (CG)n or (GC)n repeats: A reversible B-to-Z DNA transition

The transition from right-handed to left-handed DNA is not only acts as the controlling factor for switching gene expression but also has equal importance in designing nanomechanical devices. The (CG)_n and (GC)_n repeat sequences are well known model molecules to study B-Z transition in the presence of higher concentration of monovalent cations. In this communication, we report a cyclic transition in (CG)₆ DNA using millimolar concentration of trivalent lanthanide salt LaCl₃. The controlled and reversible transition was seen in (CG)₁₂, and (GC)₁₂ DNA employing CD spectroscopy. While LaCl₃ failed to induce B-Z transition in shorter oligonucleotides such as (CG)₃ and (GC)₃, a smooth B-Z transition was recorded for (CG)₆, (CG)₁₂ and (GC)₁₂ sequences. Interestingly, the phenomenon was reversible (Z-B transition) with addition of EDTA. Particularly, two rounds of cyclic transition (B-Z-B-Z-B) have been noticed in (CG)₆ DNA in presence of LaCl₃ and EDTA which strongly suggest that B-Z transition is reversible in short repeat sequences. Thermal melting and annealing behaviour of B-DNA are reversible while the thermal melting of LaCl₃-induced Z-DNA is irreversible which suggest a stronger binding of LaCl₃ to the phosphate backbone of Z-DNA. This was further supported by isothermal titration calorimetric study. Molecular dynamics (MD) simulation indicates that the mode of binding of La³⁺ (of LaCl₃) with d(CG)₈.d(CG)₈ is through the minor groove, wherein, 3 out of 11 La³⁺ bridge the anionic oxygens of the complementary strands. Such a tight coordination of La³⁺ with the anionic oxygens at the minor groove surface may be the reason for the experimentally observed irreversibility of LaCl₃-induced Z-DNA seen in longer DNA fragments. Thus, these results indicate LaCl₃ can easily be adopted as an inducer of left-handed DNA in other short oligonucleotides sequences to facilitate the understanding of the molecular mechanism of B-Z transition.

Overcoming Major Barriers to Developing Successful Sensors for Practical Applications Using Functional Nucleic Acids

For many years, numerous efforts have been focused on the development of sensitive, selective, and practical sensors for environmental monitoring, food safety, and medical diagnostic applications. However, the transition from innovative research to commercial success is relatively sparse. In this review, we identify four scientific barriers and one technical barrier to developing successful sensors for practical applications, including the lack of general methods to (a) generate receptors for a wide range of targets, (b) improve sensor selectivity to overcome interferences, (c) transduce the selective binding to different optical, electrochemical, and other signals, and (d) tune dynamic range to match thresholds of detection required for different targets; and the costly development of a new device. We then summarize solutions to overcome these barriers using sensors based on functional nucleic acids that include DNAzymes, aptamers, and aptazymes and how these sensors are coupled to widely available measurement devices to expand their capabilities and lower the barrier for their practical applications in the field and point-of-care settings.

Crystallization and Structural Determination of 8-17 DNAzyme

DNAzymes are a group of DNA molecules that can catalyze various chemical reactions. Owing to their great application potentials, DNAzymes have received significant attention. However, due to their intrinsic difficulties in crystallization and structural determination, only very limited structural information of DNAzymes is available to date. Using co-crystallization with the African Swine Fever Virus Polymerase X (AsfvPolX) protein, we have recently solved a complex structure of the 8-17 DNAzyme, which represents the first structure of the catalytically active RNA-cleaving DNAzyme. In this chapter, we describe the detailed protocols including gene construction, AsfvPolX expression and purification, crystallization, structure determination, and in vitro cleavage assay. While the specific methods described herein were originally designed for the 8-17 DNAzyme, they can also be utilized to solve other DNAzyme structures.

DNAzyme Sensor Uses Chemiluminescence Resonance Energy Transfer for Rapid, Portable, and Ratiometric Detection of Metal Ions

DNAzymes have emerged as an important class of sensors for a wide variety of metal ions, with florescence DNAzyme sensors as the most widely used in different sensing and imaging applications because of their fast response time, high signal intensity, and high sensitivity. However, the requirements of an external excitation light source and its associated power increase the cost and size of the fluorometer, making it difficult to be used for portable detections. To overcome these limitations, we report herein a DNAzyme sensor that relies on chemiluminescence resonance energy transfer (CRET) without the need for external light. The sensor is constructed by combining the functional motifs from both Pb2+-dependent 8-17 DNAzyme conjugated to fluorescein (FAM) and hemin/G-quadruplex that mimics horseradish peroxidase to catalyze the oxidation of luminol by H2O2 to yield chemiluminescence. In the absence of Pb2+, the hybridization between the enzyme and substrate strands bring the FAM and hemin/G-quadruplex in close proximity, resulting in CRET. The presence of Pb2+ ions can drive the cleavage on the substrate strand, resulting in a sharp decrease in the melting temperature of hybridization and thus separation of the FAM from hemin/G-quadruplex. The liberated CRET pair causes a ratiometric increase in the donor's fluorescent signal and a decrease in the acceptor signal. Using this method, Pb2+ ions have been measured rapidly (<15 min) with a low limit of detection at 5 nM. By removing the requirement of exogenous light excitation, we have demonstrated a simple and portable detection using a smartphone, making the DNAzyme-CRET system suitable for field tests of lake water. Since DNAzymes selective for other metal ions or targets, such as bacteria, can be obtained using in vitro selection, the method reported here opens a new avenue for rapid, portable, and ratiometric detection of many targets in environmental monitoring, food safety, and medical diagnostics.

Hydrated metal ion as a general acid in the catalytic mechanism of the 8-17 DNAzyme

The RNA-cleaving 8-17 DNAzyme, which is a metalloenzyme that depends on divalent metal ions for its function, is the most studied catalytic DNA in terms of its mechanism. By the end of 2017, a report of the crystal structure of the enzyme-substrate complex in the presence of Pb²⁺ probed some of the previous findings and opened new questions, especially around the participation of the metal ion in the catalytic mechanism and the promiscuity exhibited by the enzyme in terms of the metal cofactor required for catalysis. In this article we explore the role of the divalent metal ion in the mechanism of the 8-17 DNAzyme as a general acid, by measuring the influence of pH over the activity of a slower variant of the enzyme in the presence of Pb²⁺. We replaced G14, which has been identified as a general base in the mechanism of the enzyme, by the unnatural analog 2-aminopurine, with a lower pK_a value of the N1 group. With this approach, we obtained a bell-shaped pH-rate profile with experimental pK_a values of 5.4 and 7.0. Comparing these results with previous pH-rate profiles in the presence of Mg²⁺, our findings suggest the stabilization of the 5'-O leaving group by the hydrated metal ion acting as a general acid, in addition to the activation of the 2'-OH nucleophile by the general base G14.

Probing Metal-Dependent Phosphate Binding for the Catalysis of the 17E DNAzyme

The RNA-cleaving 17E DNAzyme exhibits different levels of cleavage activity in the presence of various divalent metal ions, with Pb²⁺ giving the fastest cleavage. In this study, the metal-phosphate interaction is probed to understand the trend of activity with different metal ions. For the first-row transition metals, the lowest activity shown by Ni²⁺ correlates with the inhibition by the inorganic phosphate and its water ligand exchange rate, suggesting inner-sphere metal coordination. Cleavage activity with the two stereoisomers of the phosphorothioate-modified substrates, R_p and S_p, indicated that Mg²⁺, Mn²⁺, Fe²⁺, and Co²⁺ had the highest S_p:R_p activity ratio of >900. Comparatively, the activity was much less affected using the thiophilic metals, including Pb²⁺, suggesting inner-sphere coordination. The pH-rate profiles showed that Pb²⁺ was different than the rest of the metal ions in having a smaller slope and a similar fitted apparent pK_a and the pK_a of metal-bound water. Combining previous reports and our current results, we propose that Pb²⁺ most likely plays the role of a general acid while the other metal ions are Lewis acid catalysts interacting with the scissile phosphate.

Detection and Quantification of Tightly Bound Zn2+ in Blood Serum Using a Photocaged Chelator and a DNAzyme Fluorescent Sensor

DNAzymes have emerged as a powerful class of sensors for metal ions due to their high selectivity over a wide range of metal ions, allowing for on-site and real-time detection. Despite much progress made in this area, detecting and quantifying tightly bound metal ions, such as those in the blood serum, remain a challenge because the DNAzyme sensors reported so far can detect only mobile metal ions that are accessible to bind the DNAzymes. To overcome this major limitation, we report the use of a photocaged chelator, XDPAdeCage to extract the Zn2+ from the blood serum and then release the chelated Zn2+ into a buffer using 365 nm light for quantification by an 8-17 DNAzyme sensor. Protocols to chelate, uncage, extract, and detect metal ions in the serum have been developed and optimized. Because DNAzyme sensors for other metal ions have already been reported and more DNAzyme sensors can be obtained using in vitro selection, the method reported in this work will significantly expand the applications of the DNAzyme sensors from sensing metal ions that are not only free but also bound to other biomolecules in biological and environmental samples.

Zn2+-dependent DNAzymes that cleave all combinations of ribonucleotides

Although several DNAzymes are known, their utility is limited by a narrow range of substrate specificity. Here, we report the isolation of two zinc-dependent DNAzymes, ZincDz1 and ZincDz2, which exhibit compact catalytic core sequences with highly versatile hydrolysis activity. They were selected through in vitro selection followed by deep sequencing analysis. Despite their sequence similarity, each DNAzyme showed different Zn²⁺-concentration and pH-dependent reaction profiles, and cleaved the target RNA sequences at different sites. Using various substrate RNA sequences, we found that the cleavage sequence specificity of ZincDz2 and its highly active mutant ZincDz2-v2 to be 5'-rN↓rNrPu-3'. Furthermore, we demonstrated that the designed ZincDz2 could cut microRNA miR-155 at three different sites. These DNAzymes could be useful in a broad range of applications in the fields of medicine and biotechnology.

Characterization of a DNA-hydrolyzing DNAzyme for generation of PCR strands of unequal length

I-R3 DNAzyme is a small, highly active catalytic DNA for DNA hydrolysis. In here, we designed two cis-structure DNAzymes (I-R3N and I-R3S) based on the different locates of the joint linker between I-R3 and its substrate. Data demonstrated that both DNAzymes were highly dependent on Zn²⁺, and worked at a narrow range around pH 7.0. They exhibited strong anti-interference with Mg²⁺ and Ca²⁺, but inhibited by Na⁺ and K⁺. Moreover, single and multiple-site mutations were generated within the catalytic core to carry out a comprehensive mutational study of I-R3 motif, in which most nucleotides were highly conserved and the nucleotides A5, T11 and T8 were identified as the mutational hotspots. Furthermore, an efficient variant A5G was obtained and its reaction condition was optimized. Finally, we constructed A5G to the 3' end of a single-stranded DNA (ssDNA) and applied it for asymmetrical PCR amplification to produce a single and double-stranded DNA mixture, in which A5G within ssDNA can self-cleave to generate a shorter desired ssDNA by denaturing gel separation. This would provide a new non-chemical modification approach for preparation of the expected ssDNA for in vitro selection of DNAzymes.

Insights into DNA catalysis from structural and functional studies of the 8-17 DNAzyme

The review examines functional knowledge gathered over two decades of research on the 8-17 DNAzyme, focusing on three aspects: the structural requirements for catalysis, the role of metal ions and the participation of general acid-base catalysis.

DNAzymes as Activity-Based Sensors for Metal Ions: Recent Applications, Demonstrated Advantages, Current Challenges, and Future Directions

Metal ions can be beneficial or toxic depending on their identity, oxidation state, and concentration. Therefore, the ability to detect and quantify different types of metal ions using portable sensors or in situ imaging agents is important for better environmental monitoring, in vitro medical diagnostics, and imaging of biological systems. While numerous metal ions in different oxidation states are present in the environment and biological systems, only a limited number of them can be detected effectively using current methods. In this Account, we summarize research results from our group that overcome this limitation by the development of a novel class of activity-based sensors based on metal-dependent DNAzymes, which are DNA molecules with enzymatic activity. First, we have developed an in vitro selection method to obtain DNAzymes from a large DNA library of up to 1015 sequences that can carry out cleavage of an oligonucleotide substrate only in the presence of a specific metal ion with high selectivity. Negative selection steps can further be used to improve the selectivity against potentially competing targets by removing sequences that recognize the competing metal ions. Second, we have developed a patented catalytic beacon method to transform the metal-dependent DNAzyme cleavage reaction into a turn-on fluorescent signal by attaching a fluorophore and quenchers to the DNAzyme complex. Because of the difference in the melting temperatures of DNA hybridization before and after metal-ion-dependent cleavage of the DNAzyme substrate, the fluorophore on the DNA cleavage product can be released from its quenchers to create a turn-on fluorescent signal. Because DNAzymes are easy to conjugate with other signaling moieties, such as gold nanoparticles, lanthanide-doped upconversion nanoparticles, electrochemical agents, and gadolinium complexes, these DNAzymes can also readily be converted into colorimetric sensors, upconversion luminescence sensors, electrochemical sensors, or magnetic resonance contrast agents. In addition to describing recent progress in developing and applying these metal ion sensors for environmental monitoring, point-of-care diagnostics, cellular imaging, and in vivo imaging in zebrafish, we summarize major advantages of this class of activity-based sensors. In addition to advantages common to most activity-based sensors, such as enzymatic turnovers that allow for signal amplification and the use of initial rates instead of absolute signals for quantification to avoid interferences from sample matrices, the DNAzyme-based sensors allow for in vitro selection to expand the method to almost any metal ion under a variety of conditions, negative selection to improve the selectivity against competing targets, and reselection of DNAzymes and combination of active and inactive variants to fine-tune the dynamic range of detection. The use of melting temperature differences to separate target binding from signaling moieties in the catalytic beacon method allows the use of different fluorophores and nanomaterials to extend the versatility and modularity of this sensing platform. Furthermore, sensing and imaging artifacts can be minimized by using an inactive mutant DNAzyme as a negative control, while spatiotemporal control of sensing/imaging can be achieved using optical, photothermal, and endogenous orthogonal caging methods. Finally, current challenges, opportunities, and future perspectives for DNAzymes as activity-based sensors are also discussed.

The Two Classic Pb2+ -Selective DNAzymes Are Related: Rational Evolution for Understanding Metal Selectivity

In 1994, the first DNAzyme named GR5 was reported, which specifically requires Pb²⁺ for its RNA cleavage activity. Three years later, the 8-17 DNAzyme was isolated. The 8-17 DNAzyme and the related 17E DNAzyme are also most active with Pb²⁺ , although other divalent metals can work as well. GR5 and 17E have the same substrate sequence, and their catalytic loops in the enzyme strands also have a few similar and conserved nucleotides. Considering these, we hypothesized that 17E might be a special form of GR5. To test this hypothesis, we performed systematic rational evolution experiments to gradually mutate GR5 toward 17E. By using the activity ratio in the presence of Pb²⁺ and Mg²⁺ for defining these two DNAzymes, the critical nucleotide was identified to be T₁₂ in 17E for metal specificity. In addition, G₉ in GR5 is a position not found in most 17E or 8-17 DNAzymes, and G₉ needs to be added to rescue GR5 activity if T₁₂ becomes a cytosine. This study highlights the links between these two classic and widely used DNAzymes, and offers new insight into the sequence-activity relationship related to metal selectivity.

Dynamical ensemble of the active state and transition state mimic for the RNA-cleaving 8-17 DNAzyme in solution

We perform molecular dynamics simulations, based on recent crystallographic data, on the 8-17 DNAzyme at four states along the reaction pathway to determine the dynamical ensemble for the active state and transition state mimic in solution. A striking finding is the diverse roles played by Na+ and Pb2+ ions in the electrostatically strained active site that impact all four fundamental catalytic strategies, and share commonality with some features recently inferred for naturally occurring hammerhead and pistol ribozymes. The active site Pb2+ ion helps to stabilize in-line nucleophilic attack, provides direct electrostatic transition state stabilization, and facilitates leaving group departure. A conserved guanine residue is positioned to act as the general base, and is assisted by a bridging Na+ ion that tunes the pKa and facilitates in-line fitness. The present work provides insight into how DNA molecules are able to solve the RNA-cleavage problem, and establishes functional relationships between the mechanism of these engineered DNA enzymes with their naturally evolved RNA counterparts. This adds valuable information to our growing body of knowledge on general mechanisms of phosphoryl transfer reactions catalyzed by RNA, proteins and DNA.

Functionalization of 8-17 DNAzymes modulates catalytic efficiency and divalent metal ion preference

8-17 and 17E DNAzyme are being explored as biosensors for metal ions and RNA motifs of interest, more sensitive and efficient DNAzymes are required to meet the practical applications. Their similarity in the catalytic cores and differences in catalytic efficiency and metal ion dependence initiated great interest about the contribution of the catalytic residues. Functionalization of four adenine residues in the catalytic cores of 8-17 DNAzyme and 17E was conducted with amino, guanidinium, and imidazolyl groups. In the bulge loops of 8-17 and 17E, N⁶-(3-aminopropyl)-2'-deoxyadenosine (residue 1) at A15 led to new DNAzymes 8-17DZ-A15-1 and 17E-A15-1, with much more efficient cleavage ability in the Ca²⁺-mediated reaction and the greater preference for Ca²⁺ over Mg²⁺ than 8-17 DNAzyme and 17E, respectively, especially with a concentration-dependent increase of the selectivity, which is different from most DNAzymes with the similar dependence on both Mg²⁺ and Ca²⁺. With this kind of post-selection modification on 8-17 DNAzymes, for the first time, the catalytic efficiency and metal ion selectivity could be positively modulated. It is also helpful for the catalyic mechanistic studies of these DNAzymes, especially, the role of the unconserved A15 should be emphasized.

Cationic copolymer-chaperoned short-armed 10-23 DNAzymes

The cationic copolymer poly(L-lysine)-graft-dextran (PLL-g-Dex) has nucleic acid chaperone-like activity. The copolymer facilitates both DNA hybridization and strand exchange reactions. For these reasons, DNA-based enzyme (DNAzyme) activity is enhanced in the presence of copolymer. In this study, we evaluated activities of DNAzymes with substrate-binding arms (S-arms) of various lengths. The copolymer promoted DNAzyme reactivity and turnover efficacy, and, depending on S-arm length, maximally accelerated the reaction rate by 250-fold compared to the rate in the absence of copolymer. The copolymer permitted up to six nucleotides truncation of the S-arms having initial length of 10 and 11 nucleotides without loss of catalytic efficiency, enable tuning of the optimal temperature ranging from 30 to 55 °C. The approach might be useful for the development of DNAzyme systems targeting short or highly structured RNAs as well for improvement of DNAzyme-based nanomachines and biosensors.

Cationic copolymer-chaperoned DNAzyme sensor for microRNA detection

Multi-component nucleic acid enzymes (MNAzymes) are allosteric deoxyribozymes that are activated upon binding of a specific nucleic acid effector. MNAzyme activity is limited due to an insufficient assembly of the MNAzyme and its turnover. In this work, we describe the successful improvement of MNAzyme reactivity and selectivity by addition of cationic copolymers, which exhibit nucleic acid chaperone-like activity. The copolymer allowed a 210-fold increase in signal activity and a 95-fold increase in the signal-to-background selectivity of MNAzymes constructed for microRNA (miRNA) detection. The selectivity of the MNAzyme for homologous miRNAs was demonstrated in a multiplex format in which isothermal reactions of two different MNAzymes were performed. In addition, the copolymer permitted miRNA detections even in the presence of a ribonuclease which is ubiquitous in environments, indicating the protective effect of the copolymer against ribonucleases.

Ultrasensitive and Portable Assay for Lead(II) Ions by Electronic Balance as a Readout

Lead ions (Pb²⁺) cause harm to human health. Therefore, the development of fast, effective, and convenient sensors for Pb²⁺ monitoring has received great attention. In this study, a portable method has been proposed for Pb²⁺ detection using normal electronic balance as a readout. Magnetic bead-catalytic strand is hybridized with platinum nanoparticles (Pt NPs) functioned substrate strand (Pt-Sub) to form double-stranded DNA first. In the presence of Pb²⁺, the DNAzyme is activated and cleaved at the ribo-adenosine site of the substrate strand and hence causes Pt NPs to be released into the supernatant, which can be easily separated from the Pt-Sub by a magnet. The separated Pt NPs can effectively catalyze the decomposition of H₂O₂ to produce O₂. In a sealed bottle, the pressure inside the bottle is increased by the generation of oxygen so that the water is discharged from the drainage device, and the weight of the water can be easily and precisely measured by a normal electronic balance. The weighting water has a linear relationship with the concentration of Pb²⁺ in the range of 2.5-100 nM and the detection limit of 0.83 nM (S/N = 3). The proposed method has been applied to detect Pb²⁺ in water with satisfactory results. Because the electronic balance is one of the most commonly used analytical tools for the laboratory, it is very practical and convenient without the need for expensive instruments and complicated data processing.

Growing prospects of DNA nanomaterials in novel biomedical applications

As an important genetic material for life, DNA has been investigated widely in recent years, especially in interdisciplinary fields crossing nanomaterials and biomedical applications. It plays an important role because of its extraordinary molecular recognition capability and novel conformational polymorphism. DNA is also a powerful and versatile building block for the fabrication of nanostructures and nanodevices. Such DNA-based nanomaterials have also been successfully applied in various aspects ranging from biosensors to biomedicine and special logic gates, as well as in emerging molecular nanomachines. In this present mini-review, we briefly overview the recent progress in these fields. Furthermore, some challenges are also discussed in the conclusions and perspectives section, which aims to stimulate broader scientific interest in DNA nanotechnology and its biomedical applications.

Reselection Yielding a Smaller and More Active Silver-Specific DNAzyme

Ag10c is a recently reported RNA-cleaving DNAzyme obtained from in vitro selection. Its cleavage activity selectively requires Ag⁺ ions, and thus it has been used as a sensor for Ag⁺ detection. However, the previous selection yielded very limited information regarding its sequence requirement, since only ∼0.1% of the population in the final library were related to Ag10c and most other sequences were inactive. In this work, we performed a reselection by randomizing the 19 important nucleotides in Ag10c in such a way that a purine has an equal chance of being A or G, whereas a pyrimidine has an equal chance of being T or C. The round 3 library of the reselection was carefully analyzed and a statistic understanding of the relative importance of each nucleotide was obtained. At the same time, a more active mutant was identified, containing two mutated nucleotides. Further analysis indicated new base pairs leading to an enzyme with smaller catalytic loops but with ∼200% activity of the original Ag10c, and also excellent selectivity for Ag⁺. Therefore, a more active mutant of Ag10c was obtained and further truncations were successfully performed, which might be better candidates for developing new biosensors for silver. A deeper biochemical understanding was also obtained using this reselection method.

Re-engineering 10-23 core DNA- and MNAzymes for applications at standard room temperature

DNA- and MNAzymes are nucleic acid-based enzymes (NAzymes), which infiltrated the otherwise protein-rich field of enzymology three decades ago. The 10-23 core NAzymes are one of the most widely used and well-characterized NAzymes, but often require elevated working temperatures or additional complex modifications for implementation at standard room temperatures. Here, we present a generally applicable method, based on thermodynamic principles governing hybridization, to re-engineer the existing 10-23 core NAzymes for use at 23 °C. To establish this, we first assessed the activity of conventional NAzymes in the presence of cleavable and non-cleavable substrate at 23 °C as well as over a temperature gradient. These tests pointed towards a non-catalytic mechanism of signal generation at 23 °C, suggesting that conventional NAzymes are not suited for use at this temperature. Following this, several novel NAzyme-substrate complexes were re-engineered from the conventional ones and screened for their performance at 23 °C. The complex with substrate and substrate-binding arms of the NAzymes shortened by four nucleotides on each terminus demonstrated efficient catalytic activity at 23 °C. This has been further validated over a dilution of enzymes or enzyme components, revealing their superior performance at 23 °C compared to the conventional 10-23 core NAzymes at their standard operating temperature of 55 °C. Finally, the proposed approach was applied to successfully re-engineer three other new MNAzymes for activity at 23 °C. As such, these re-engineered NAzymes present a remarkable addition to the field by further widening the diverse repertoire of NAzyme applications.

The Cucurbit[7]Uril-Based Supramolecular Chemistry for Reversible B/Z-DNA Transition

As a left-handed helical structure, Z-DNA is biologically active and it may be correlated with transcription and genome stability. Until recently, it remained a significant challenge to control the B/Z-DNA transition under physiological conditions. The current study represents the first to reversibly control B/Z-DNA transition using cucurbit[7]uril-based supramolecular approach. It is demonstrated that cucurbit[7]uril can encapsulate the central butanediamine moiety [HN(CH2)4NH] and reverses Z-DNA caused by spermine back to B-DNA. The subsequent treatment with 1-adamantanamine disassembles the cucurbit[7]uril/spermine complex and readily induces reconversion of B- into Z-DNA. The DNA conformational change is unequivocally demonstrated using different independent methods. Direct evidence for supramolecular interactions involved in DNA conformational changes is further provided. These findings can therefore open a new route to control DNA helical structure in a reversible way.

Evidence of a General Acid-Base Catalysis Mechanism in the 8-17 DNAzyme

DNAzymes are catalytic DNA molecules that can perform a variety of reactions. Although advances have been made in obtaining DNAzymes via in vitro selection and many of them have been developed into sensors and imaging agents for metal ions, bacteria, and other molecules, the structural features responsible for these enzymatic reactions are still not well understood. Previous studies of the 8-17 DNAzyme have suggested conserved guanines close to the phosphodiester transfer site may play a role in the catalytic reaction. To identify the specific guanine and functional group of the guanine responsible for the reaction, we herein report the effects of replacing G1.1 and G14 (G; p Ka,N1 = 9.4) with analogues with a different p Ka at the N1 position, such as inosine (G14I; p Ka,N1 = 8.7), 2,6-diaminopurine (G14diAP; p Ka,N1 = 5.6), and 2-aminopurine (G14AP; p Ka,N1 = 3.8) on pH-dependent reaction rates. A comparison of the pH dependence of the reaction rates of these DNAzymes demonstrated that G14 in the bulge loop next to the cleavage site, is involved in proton transfer at the catalytic site. In contrast, we did not find any evidence of G1.1 being involved in acid-base catalysis. These results support general acid-base catalysis as a feasible strategy used in DNA catalysis, as in RNA and protein enzymes.

Splitting a DNAzyme enables a Na+-dependent FRET signal from the embedded aptamer

Recently, a few Na⁺-specific RNA-cleaving DNAzymes have been reported, and a Na⁺ aptamer was identified from the NaA43 and Ce13d DNAzymes. These DNAzymes and the embedded aptamer have been used for Na⁺ detection. In this work, we studied the Na⁺-dependent folding of the Ce13d DNAzyme using fluorescence resonance energy transfer (FRET). When a FRET donor and an acceptor were respectively labeled at the ends of the DNAzyme, Na⁺ failed to induce an obvious end-to-end distance change, suggesting a rigid global structure. To relax this rigidity, the Ce13d DNAzyme was systematically split at various sites on both the enzyme and the substrate strands. The Na⁺ binding activity of the split structures was characterized by 2-aminopurine fluorescence, enzymatic activity, Tb³⁺-sensitized luminescence, and DMS footprinting. Among the various constructs, the only one that retained Na⁺ binding was the split at the cleavage site, and this construct was further labeled with two dyes near the split site. This FRET result showed Na⁺-dependent folding with a K_d of 26 mM Na⁺. This study provides important structural information related to Na⁺ binding to this new aptamer, which might also be useful for future work in biosensor design.

Preparation of Ru(ii)@oligonucleotide nanosized polymers as potential tumor-imaging luminescent probes

The development of Ru(ii) complexes as luminescent probes has attracted increasing attention in recent decades. In this study, the nanosized polymers of two Ru(ii) complexes [Ru(phen)₂(dppz)](ClO₄)₂ (1, phen = 1,10-phenanthrolin; dppz = dipyrido[3,2-a:2′,3′-c]phenazine) and [Ru(phen)₂(Br-dppz)](ClO₄)₂ (2, Br-dppz = 11-bromodipyrido[3,2-a:2′,3′-c]phenazine) with oligonucleotides were prepared and investigated as potential tumor-imaging probes. The formation of the nanosized polymers, which had an average width of 125–438 nm and an average height of 3–6 nm, for 1 and 2@oligonucleotides were observed through atomic force microscopy. The emission spectra indicated that the luminescence of 1 and 2 markedly increased after binding to oligonucleotides and double-strand DNA (calf thymus DNA), respectively. Moreover, further studies indicated that 1@oligonucleotides and 2@oligonucleotides can easily enter into tumor cells and selectively highlight the tumor area in the zebrafish bear xenograft tumor (MDA-MB-231). In summary, this study demonstrated that 1@oligonucleotides and 2@oligonucleotides could be developed as potential tumor-imaging luminescent probes for clinical diagnosis and therapy.

Ru(ii)@oligonucleotide nanoparticles can be developed as potential tumor selective tracker and have potential applications of tumor targeting imaging.

Crystal structure of an RNA-cleaving DNAzyme

In addition to storage of genetic information, DNA can also catalyze various reactions. RNA-cleaving DNAzymes are the catalytic DNAs discovered the earliest, and they can cleave RNAs in a sequence-specific manner. Owing to their great potential in medical therapeutics, virus control, and gene silencing for disease treatments, RNA-cleaving DNAzymes have been extensively studied; however, the mechanistic understandings of their substrate recognition and catalysis remain elusive. Here, we report three catalytic form 8-17 DNAzyme crystal structures. 8-17 DNAzyme adopts a V-shape fold, and the Pb²⁺ cofactor is bound at the pre-organized pocket. The structures with Pb²⁺ and the modification at the cleavage site captured the pre-catalytic state of the RNA cleavage reaction, illustrating the unexpected Pb²⁺-accelerated catalysis, intrinsic tertiary interactions, and molecular kink at the active site. Our studies reveal that DNA is capable of forming a compacted structure and that the functionality-limited bio-polymer can have a novel solution for a functional need in catalysis.

Rapid Enrichment and Sensitive Detection of Multiple Metal Ions Enabled by Macroporous Graphene Foam

Nanomaterials have shown great promise in advancing biomedical and environmental analysis because of the unique properties originated from their ultrafine dimensions. In general, nanomaterials are separately applied to either enhance detection by producing strong signals upon target recognition or to specifically extract analytes taking advantage of their high specific surface area. Herein, we report a dual-functional nanomaterial-based platform that can simultaneously enrich and enable sensitive detection of multiple metal ions. The macroporous graphene foam (GF) we prepared displays abundant phosphate groups on the surface and can extract divalent metal ions via metal-phosphate coordination. The enriched metal ions then activate the metal-responsive DNAzymes and produce the fluorescently labeled single-stranded DNAs that are adsorbed and quenched by the GF. The resultant fluorescence reduction can be used for metal quantitation. The present work demonstrated duplexed detection of Pb2+ and Cu2+ using the Pb- and Cu-responsive DNAzymes, achieving a low detection limit of 50 pM and 0.6 nM, respectively. Successful quantification of Pb2+ and Cu2+ in human serum and river water were achieved with high metal recovery. Since the phosphate-decorated GF can enrich diverse types of divalent metal cations, this dual-functional GF-DNAzyme platform can serve as a simple and cost-effective tool for rapid and accurate metal quantification in determination of human metal exposure and inspection of environmental contamination.

Local conformational changes in the 8–17 deoxyribozyme core induced by activating and inactivating divalent metal ions

Placing 2-aminopurine at position 15 of the 8–17 DNAzyme allows the detection of a specific metal-induced conformational change, apparently coupled to the activation of catalysis.

Characterization of Highly Efficient RNA-Cleaving DNAzymes that Function at Acidic pH with No Divalent Metal-Ion Cofactors

Here, we describe the characterization of new RNA‐cleaving DNAzymes that showed the highest catalytic efficiency at pH 4.0 to 4.5, and were completely inactive at pH values higher than 5.0. Importantly, these DNAzymes did not require any divalent metal ion cofactors for catalysis. This clearly suggests that protonated nucleic bases are involved in the folding of the DNAzymes into catalytically active structures and/or in the cleavage mechanism. The trans‐acting DNAzyme variants were also catalytically active. Mutational analysis revealed a conservative character of the DNAzyme catalytic core that underpins the high structural requirements of the cleavage mechanism. A significant advantage of the described DNAzymes is that they are inactive at pH values close to physiological pH and under a wide range of conditions in the presence of monovalent and divalent metal ions. These pH‐dependent DNAzymes could be used as molecular cassettes in biotechnology or nanotechnology, in molecular processes that consist of several steps. The results expand the repertoire of DNAzymes that are active under nonphysiological conditions and shed new light on the possible mechanisms of catalysis.

A highly specific sodium aptamer probed by 2-aminopurine for robust Na+ sensing

Sodium is one of the most abundant metals in the environment and in biology, playing critical ecological and physiological roles. Na⁺ is also the most common buffer salt for nucleic acids research, while its specific interaction with DNA has yet to be fully studied. Herein, we probe a highly selective and robust Na⁺ aptamer using 2-aminopurine (2AP), a fluorescent adenine analog. This aptamer has two DNA strands derived from the Ce13d DNAzyme. By introducing a 2AP at the cleavage site of the substrate strand, Na⁺ induces ∼40% fluorescence increase. The signaling is improved by a series of rational mutations, reaching >600% with the C₁₀A₂₀ double mutant. This fluorescence enhancement suggests relaxed base stacking near the 2AP label upon Na⁺ binding. By replacing a non-conserved adenine in the enzyme strand by 2AP, Na⁺-dependent fluorescence quenching is observed, suggesting that the enzyme loop folds into a more compact structure upon Na⁺ binding. The fluorescence changes allow for Na⁺ detection. With an optimized sequence, a detection limit of 0.4 mM Na⁺ is achieved, reaching saturated signal in less than 10 s. The sensor response is insensitive to ionic strength, which is critical for Na⁺ detection.

A Selective Na(+) Aptamer Dissected by Sensitized Tb(3+) Luminescence

A previous study of two RNA-cleaving DNAzymes, NaA43 and Ce13d, revealed the possibility of a common Na(+) aptamer motif. Because Na(+) binding to DNA is a fundamental biochemical problem, the interaction between Ce13d and Na(+) was studied in detail by using sensitized Tb(3+) luminescence spectroscopy. Na(+) displaces Tb(3+) from the DNAzyme, and thus quenches the emission from Tb(3+) . The overall requirement for Na(+) binding includes the hairpin and the highly conserved 16-nucleotide loop in the enzyme strand, along with a few unpaired nucleotides in the substrate. Mutation studies indicate good correlation between Na(+) binding and cleavage activity, thus suggesting a critical role of Na(+) binding for the enzyme activity. Ce13d displayed a Kd of ∼20 mm with Na(+) (other monovalent cations: 40-60 mm). The Kd values for other metal ions are mainly due to non-specific competition. With a single nucleotide mutation, the specific Na(+) binding was lost. Another mutant improved Kd to 8 mm with Na(+) . This study has demonstrated a Na(+) aptamer with important biological implications and analytical applications. It has also defined the structural requirements for Na(+) binding and produced an improved mutant.

Lanthanum induced B-to-Z transition in self-assembled Y-shaped branched DNA structure

Controlled conversion of right-handed B-DNA to left-handed Z-DNA is one of the greatest conformational transitions in biology. Recently, the B-Z transition has been explored from nanotechnological points of view and used as the driving machinery of many nanomechanical devices. Using a combination of CD spectroscopy, fluorescence spectroscopy, and PAGE, we demonstrate that low concentration of lanthanum chloride can mediate B-to-Z transition in self-assembled Y-shaped branched DNA (bDNA) structure. The transition is sensitive to the sequence and structure of the bDNA. Thermal melting and competitive dye binding experiments suggest that La³⁺ ions are loaded to the major and minor grooves of DNA and stabilize the Z-conformation. Our studies also show that EDTA and EtBr play an active role in reversing the transition from Z-to-B DNA.

Catalytic DNA: Scope, Applications, and Biochemistry of Deoxyribozymes

The discovery of natural RNA enzymes (ribozymes) prompted the pursuit of artificial DNA enzymes (deoxyribozymes) by in vitro selection methods. A key motivation is the conceptual and practical advantages of DNA relative to proteins and RNA. Early studies focused on RNA-cleaving deoxyribozymes, and more recent experiments have expanded the breadth of catalytic DNA to many other reactions. Including modified nucleotides has the potential to widen the scope of DNA enzymes even further. Practical applications of deoxyribozymes include their use as sensors for metal ions and small molecules. Structural studies of deoxyribozymes are only now beginning; mechanistic experiments will surely follow. Following the first report 21 years ago, the field of deoxyribozymes has promise for both fundamental and applied advances in chemistry, biology, and other disciplines.

Biochemical and Biophysical Understanding of Metal Ion Selectivity of DNAzymes

This review summarizes research into the metal-binding properties of catalytic DNAzymes, towards the goal of understanding the structural properties leading to metal ion specificity. Progress made and insight gained from a range of biochemical and biophysical techniques are covered, and promising directions for future investigations are discussed.