Enhanced Stabilization and Easy Phase Transfer of CsPbBr3 Perovskite Quantum Dots Promoted by High-Affinity Polyzwitterionic Ligands

Synthesis, characterization, and practical applications of perovskite quantum dots: recent update

This review paper provides an in-depth analysis of Perovskite quantum dots (PQDs), a class of nanomaterials with unique optical and electronic properties that hold immense potential for various technological applications. The paper delves into the structural characteristics, synthesis methods, and characterization techniques of PQDs, highlighting their distinct advantages over other Quantum Dots (QDs). Various applications of PQDs in fields such as solar cells, LEDs, bioimaging, photocatalysis, and sensors are discussed, showcasing their versatility and promising capabilities. The ongoing advancements in PQD research and development point towards a bright future for these nanostructures in revolutionizing diverse industries and technologies.

Ligand Engineering of Inorganic Lead Halide Perovskite Quantum Dots toward High and Stable Photoluminescence

The ligand engineering of inorganic lead halide perovskite quantum dots (PQDs) is an indispensable strategy to boost their photoluminescence stability, which is pivotal for optoelectronics applications. CsPbX3 (X = Cl, Br, I) PQDs exhibit exceptional optical properties, including high color purity and tunable bandgaps. Despite their promising characteristics, environmental sensitivity poses a challenge to their stability. This article reviews the solution-based synthesis methods with ligand engineering. It introduces the impact of factors like humidity, temperature, and light exposure on PQD's instability, as well as in situ and post-synthesis ligand engineering strategies. The use of various ligands, including X- and L-type ligands, is reviewed for their effectiveness in enhancing stability and luminescence performance. Finally, the significant potential of ligand engineering for the broader application of PQDs in optoelectronic devices is also discussed.

High-Efficiency Blue-Emitting Mn-Ligand passivated CsPbBr3 nanoplatelets

Perovskite nanoplatelets (NPLs), as a promising material to achieve pure blue emission, have attracted significant attention in high gamut displays. However, the high surface-to-volume ratio and the loosely connected ligands of NPLs make them susceptible to degradation from light, air and heat. As a result, NPLs often exhibit low photoluminescence (PL) intensity and instability. Here, an Mn-ligand passivation strategy is proposed, in which Mn-doped DMAPbBr3 is used as a precursor. During the perovskite transformation, Mn2+ ions migrate from the lattice of DMAPbBr3 to the surface of CsPbBr3 NPLs, which have strong binding forces with ligands. The final products Mn-CsPbBr3 (M-CPB) NPLs are then acquired by the ligand-induced ripening growth process, which not only exhibit pure blue emission with narrow full width at half maximum (FWHM), but also possess near-unity PL quantum yields (QYs). Besides, M-CPB NPLs show excellent stability due to the strong Mn-ligand passivation layer. Based on the new growth mechanism discovery, the reaction time can be shortened to several minutes by heating. The innovative growth model proposed in this work will provide a paradigm for designing and optimizing future synthesis schemes.

Pattern-Matched Polymer Ligands Toward Near-Perfect Synergistic Passivation for High-Performance and Stable Br/Cl Mixed Perovskite Light-Emitting Diodes

Mixed Br/Cl perovskite nanocrystals (PeNCs) exhibit bright pure-blue emission benefiting for fulfilling the Rec. 2100 standard. However, phase segregation remains a significant challenge that severely affects the stability and emission spectrum of perovskite light-emitting diodes (PeLEDs). Here, we demonstrate the optimization of the spacing between polydentate functional groups of polymer ligands to match the surface pattern of CsPbBr1.8Cl1.2 PeNCs, resulting in effective synergistic passivation effect and significant improvements in PeLED performances. The block and alternating copolymers with different inter-functional group spacing are facilely synthesized as ligands for PeNCs. Surprisingly, block copolymers with a higher functional group density do not match PeNCs, while alternating copolymers enable efficient PeNCs with the high photoluminescence intensity, low non-radiative recombination rate and high exciton binding energy. Density functional theory calculations clearly confirm the almost perfect match between alternating copolymers and PeNCs. Finally, pure-blue PeLEDs are achieved with the emission at 467 nm and Commission Internationale de l'Eclairage (CIE) coordinates of (0.131, 0.071), high external quantum efficiency (9.1 %) and record spectral and operational stabilities (~80 mins) in mixed-halide PeLEDs. Overall, this study contributes to designing the polymer ligands and promoting the development of high-performance and stable pure-color PeLEDs towards display applications.

Organosilicon-Based Ligand Design for High-Performance Perovskite Nanocrystal Films for Color Conversion and X-ray Imaging

Perovskite nanocrystals (PNCs) bear a huge potential for widespread applications, such as color conversion, X-ray scintillators, and active laser media. However, the poor intrinsic stability and high susceptibility to environmental stimuli including moisture and oxygen have become bottlenecks of PNC materials for commercialization. Appropriate barrier material design can efficiently improve the stability of the PNCs. Particularly, the strategy for packaging PNCs in organosilicon matrixes can integrate the advantages of inorganic-oxide-based and polymer-based encapsulation routes. However, the inert long-carbon-chain ligands (e.g., oleic acid, oleylamine) used in the current ligand systems for silicon-based encapsulation are detrimental to the cross-linking of the organosilicon matrix, resulting in performance deficiencies in the nanocrystal films, such as low transparency and large surface roughness. Herein, we propose a dual-organosilicon ligand system consisting of (3-aminopropyl)triethoxysilane (APTES) and (3-aminopropyl)triethoxysilane with pentanedioic anhydride (APTES-PA), to replace the inert long-carbon-chain ligands for improving the performance of organosilicon-coated PNC films. As a result, strongly fluorescent PNC films prepared by a facile solution-casting method demonstrate high transparency and reduced surface roughness while maintaining high stability in various harsh environments. The optimized PNC films were eventually applied in an X-ray imaging system as scintillators, showing a high spatial resolution above 20 lp/mm. By designing this promising dual organosilicon ligand system for PNC films, our work highlights the crucial influence of the molecular structure of the capping ligands on the optical performance of the PNC film.

Efficient CsPbBr3 Perovskite Light-Emitting Diodes via Novel Multi-Step Ligand Exchange Strategy Based on Zwitterionic Molecules

Perovskite nanocrystals have absorbed increasing interest, especially in the field of optoelectronics, owing to their unique characteristics, including their tunable luminescence range, robust solution processability, facile synthesis, and so on. However, in practice, due to the inherent instability of the traditional long-chain insulating ligands surrounding perovskite quantum dots (PeQDs), the performance of the as-fabricated QLED is relatively disappointing. Herein, the zwitterion 3-(decyldimethylammonio)propanesulfonate (DLPS) with the capability of double passivating perovskite quantum dots could effectively replace the original long-chain ligand simply through a multistep post-treatment strategy to finally inhibit the formation of defects. It was indicated from theexperimental results that the DLPS, as one type of ligand with the bimolecular ion, was very adavntageous in replacing long-chain ligands and further suppressing the formation of defects. Finally, the perovskite quantum dots with greatly enhanced PLQY as high as 98% were effectively achieved. Additionally, the colloidal stability of the corresponding PeQDs has been significantly enhanced, and a transparent colloidal solution was obtained after 45 days under ambient conditions. Finally, the as-fabricated QLEDs based on the ligand-exchanged PeQDs exhibited a maximum brightness of 9464 cd/m2 and an EQE of 12.17%.

Defects in lead halide perovskite light-emitting diodes under electric field: from behavior to passivation strategies

Lead halide perovskites (LHPs) are emerging semiconductor materials for light-emitting diodes (LEDs) owing to their unique structure and superior optoelectronic properties. However, defects that initiate degradation of LHPs through external stimuli and prompt internal ion migration at the interfaces remain a significant challenge. The electric field (EF), which is a fundamental driving force in LED operation, complicates the role of these defects in the physical and chemical properties of LHPs. A deeper understanding of EF-induced defect behavior is crucial for optimizing the LED performance. In this review, the origins and characterization of defects are explored, indicating the influence of EF-induced defect dynamics on LED performance and stability. A comprehensive overview of recent defect passivation approaches for LHP bulk films and nanocrystals (NCs) is also provided. Given the ubiquity of EF, a summary of the EF-induced defect behavior can enhance the performance of perovskite LEDs and related optoelectronic devices.

Aqueous-Based Inorganic Colloidal Halide Perovskites Customizing Liquid Scintillators

Compared to solid scintillators and organic liquid scintillators, aqueous-based liquid scintillators (AbLS) have more superiority in highly flexible scalability, yet are now limited by their low light yield (≈100 photons MeV-1 ). Here, aqueous-based inorganic colloidal halide perovskites with high photoluminescence quantum yield (PLQY) of three primary color luminescence up to 88.1% (red), 96% (green), and 81.8% (blue) are respectively synthesized, and a new generation of colloidal perovskite-mediated AbLS (PAbLS) with light yield increased in comparison with the commercial scintillator AbLS is fabricated. This paper exhibits that the excellent PLQY and colloidal dispersion of halide perovskites benefit from poly(ethylene glycol) modification and this modification ensures the vacancy inhibition and formation of defect-free surfaces in an aqueous solution. Moreover, their high luminescent emission can be maintained for 100 days at low temperatures, and such modification also promises the heat-to-cold customization of operating temperature even in ice below 0 °C. Finally, depending on the light yield of around 3058 and 8037 photons MeV-1 at room temperature and low temperature, PAbLS with shape/size scalability exhibit their robust radiation hardness (dose rate as high as 23 mGy s-1 ) and conceptual application potential in high-energy ray radiation detection from every angle of 360°.

Highly Luminescent and Stable Halide Perovskite Nanocrystals by Interfacial Defect Passivation and Amphiphilic Ligand Capping

Halide vacancies cause lattice degradation and nonradiative losses in halide perovskites. In this study, we strategically fill bromide vacancies in CsPbBr3 perovskite nanocrystals with NaBr, KBr, or CsBr at the organic-aqueous interface for hydrophobic ligand-capped nanocrystals or in a polar solvent (2-propanol) for amphiphilic ligand-capped nanocrystals. Energy-dispersive X-ray spectra, powder X-ray diffraction data, and scanning transmission electron microscopy images help us confirm vacancy filling and the structures of samples. The bromide salts increase the photoluminescence quantum yield (98 ± 2%) of CsPbBr3 by decreasing the nonradiative decay rate. Single-particle studies show the quantum yield increase originates from the poorly luminescent nanocrystals becoming highly luminescent after filling vacancies. Furthermore, we tune the optical band gap (ultraviolet-visible-near-infrared) of the hydrophobic ligand-capped nanocrystals by halide exchange at the toluene-water interface using saturated NaCl or NaI solutions, which completes in about 60 min under continuous mixing. In contrast, the amphiphilic ligand accelerates the halide exchange in 2-propanol, suggesting ambipolar functional groups speed up the ion-exchange reaction. The bromide vacancy-filled or halide-exchanged samples in a toluene-water biphasic solvent show higher stability than amphiphilic ligand-capped samples in 2-propanol. This strategy of defect passivation, ion exchange, and ligand chemistry to improve quantum yields and tune band gaps of halide perovskite nanocrystals can be promising for designing stable and water-soluble perovskite samples for solar cells, light-emitting diodes, photodetectors, and photocatalysts.

Simultaneous Enhancement of the Luminescence Intensity and Stability of Deep-Red CsPbI3 Perovskite Quantum Dots Achieved by a Doping Strategy

The phase instability of CsPbI3 perovskite quantum dots (PQDs) restricts their practical applications due to the easy conversion from the luminescent cubic phase to the non-luminescent orthorhombic phase. The elemental doping route has been regarded as one of the most effective strategies to achieve high-quality PQDs-based phosphors. Herein, a stoichiometric amount of nickel chloride (NiCl2) has been effectively doped into the CsPbI3 lattice. The incorporation of Ni2+ ions has little effect on the crystal phase, structure, and morphology of the CsPbI3 PQDs but greatly influences their luminescence properties. The Ni2+ doping not only improves the luminescence performance but also greatly enhances the stability against temperature, storage time, and polar solvent. The formation process and luminescence and stability improvement mechanisms have been discussed. Moreover, the influence of a series of other metal chlorides (KCl, NaCl, MgCl2, ZnCl2, SnCl2, and CaCl2) on the luminescence performance of CsPbI3 PQDs has been systematically investigated, revealing that the luminescence intensity increases by introducing CaCl2, SnCl2, or ZnCl2 but decreases after doping MgCl2, NaCl, or KCl into the CsPbI3 lattice. The as-proposed doping strategy may have a significant impact on tackling the intrinsic instability of all-inorganic CsPbX3 PQDs, shedding light on their future applications in light-emitting diode (LED) devices and solid-state lighting.

Interfacial Engineering of In2Se3/h-BN/CsPb(Br/I)3 Heterostructure Photodetector and Its Application in Automatic Obstacle Avoidance System

Driven by the rapid development of autonomous vehicles, ultrasensitive photodetectors with high signal-to-noise ratio and ultraweak light detection capability are urgently needed. Due to its intriguing attributes, the emerging van der Waals material, indium selenide (In2Se3), has attracted extensive attention as an ultrasensitive photoactive material. However, the lack of an effective photoconductive gain mechanism in individual In2Se3 inhibits its further application. Herein, we propose a heterostructure photodetector consisting of an In2Se3 photoactive channel, a hexagonal boron nitride (h-BN) passivation layer, and a CsPb(Br/I)3 quantum dot gain layer. This device manifests a signal-to-noise ratio of 2 × 106 with responsivity of 2994 A/W and detectivity of 4.3 × 1014 Jones. Especially, it enables the detection of weak light as low as 0.03 μW/cm2. These performance characteristics are ascribed to the interfacial engineering. In2Se3 and CsPb(Br/I)3 with type-II band alignment promote the separation of photocarriers, while h-BN passivates the impurities on CsPb(Br/I)3 and promises a high-quality carrier transport interface. Furthermore, this device is successfully integrated into an automatic obstacle avoidance system, demonstrating promising application prospects in autonomous vehicles.

Application of Perovskite Nanocrystals as Fluorescent Probes in the Detection of Agriculture- and Food-Related Hazardous Substances

Halide perovskite nanocrystals (PNCs) are a new kind of luminescent material for fluorescent probes. Compared with traditional nanosized luminescent materials, PNCs have better optical properties, such as high fluorescence quantum yield, tunable band gap, low size dependence, narrow emission bandwidth, and so on. Therefore, they have broad application prospects as fluorescent probes in the detection of agriculture- and food-related hazardous substances. In this paper, the structure and basic properties of PNCs are briefly described. The water stabilization methods, such as polymer surface coating, ion doping, surface passivation, etc.; are summarized. The recent advances of PNCs such as fluorescent probes for detecting hazardous substances in the field of agricultural and food are reviewed, and the detection effect and mechanism are discussed and analyzed. Finally, the problems and solutions faced by PNCs as fluorescent probes in agriculture and food were summarized and prospected. It is expected to provide a reference for further application of PNCs as fluorescent probes in agriculture and food.

Ligands in Lead Halide Perovskite Nanocrystals: From Synthesis to Optoelectronic Applications

Ligands are indispensable for perovskite nanocrystals (NCs) throughout the whole lifetime, as they not only play key roles in the controllable synthesis of NCs with different sizes and shapes, but also act as capping shell that affects optical properties and electrical coupling of NCs. Establishing a systematic understanding of the relationship between ligands and perovskite NCs is significant to enable many potential applications of NCs. This review mainly focuses on the influence of ligands on perovskite NCs. First of all, the ligands-dominated size and shape control of NCs is discussed. Whereafter, the surface defects of NCs and the bonding between ligands and perovskite NCs are classified, and corresponding post-treatment of surface defects via ligands is also summarized. Furthermore, advances in engineering the ligands towards the high performance of optoelectronic devices based on perovskite NCs, including photodetector, solar cell, light emitting diode (LED), and laser, and finally to potential challenges are also discussed.

Lattice-Distortion-Induced Change in the Magnetic Properties in Br-Defect Host CsPbBr3 Perovskite Quantum Dots

Herein, we report temperature- and field-induced magnetic states in CsPbBr₃ perovskite quantum dots (PQDs) attributed to Br defects. We find that temperature-dependent structural distortion is the main source of various temperature-induced magnetic states in Br-defect host CsPbBr₃ PQDs. Comprehensively examined magnetization data through Arrott plots, Langevin and Brillouin function fitting, and structural analysis reveal the presence of various oxidation states (i.e., Pb⁰, Pb⁺, Pb²⁺, and Pb³⁺) yielding different magnetic states, such as diamagnetic states above 90 K, paramagnetic states below ≈90 K, and perhaps locally ordered states between 58 and 90 K. It is realized from theoretical fits that paramagnetic ions exist (i.e., superparamagnetic behavior) due to Br defects causing Pb⁺ (and/or Pb³⁺ ions) in the diamagnetic region. We anticipate that our findings will spur future research of the development of spin-optoelectronics, such as spin light-emitting diodes, and spintronics devices based on CsPbBr₃ PQDs.

Highly efficient silica coated perovskite nanocrystals with the assistance of ionic liquids for warm white LEDs

Given the inherent characteristics of defect-tolerant, tunable emission performance, and high extinction coefficient, lead halide perovskite nanocrystals (NCs) have attracted widespread attention as a promising material in optoelectronic fields. However, their poor structural stability greatly impedes their practical applications. Herein, a novel strategy for synthesizing stable CsPbBr₃@SiO₂ NCs via the hydrolytic polycondensation of (3-aminopropyl)triethoxysilane (APTES) in the presence of ionic liquids (ILs) is deliberately designed. The problems of fluorescence quenching and undesirable agglomeration of NCs resulting from ligand loss and surface erosion existing in common encapsulation methods can be effectively resolved. The fast and controllable growth of the SiO₂ shell around the CsPbBr₃ NCs is realized owing to the high polarity and hygroscopicity of the IL. Moreover, the dual effects of the IL for passivating the surface defects and avoiding the structural degradation of NCs during the hydrolysis process of APTES are demonstrated. As a result, CsPbBr₃@SiO₂ NCs with a high photoluminescence quantum yield of 85.7% and excellent stability are realized. Furthermore, this method proves to be a versatile tool to obtain CsPbX₃@SiO₂ NCs with different halide compositions, realizing a broad tunable wavelength from 421.2 nm to 651.6 nm. A warm white LED with a high color rending index was assembled through packaging CsPbBr₃@SiO₂ NCs and Cu-In-Zn-S/ZnS/PVP composites on a commercial blue chip. These findings are expected to facilitate the development of perovskite NCs, which provides access to their optoelectronic applications.

Polymerizable Surfactant Ligand for Stabilization and Film Formation of CsPbBr3 Nanocrystals

Surfactant ligands are important in the synthesis of inorganic perovskite nanocrystals (NCs), not only for stabilizing NCs but also for surface defect passivation. A new polymerizable surfactant ligand with a multidentate l-cysteine head, a long oleoyl tail, and a polymerizable styrenyl group (NOSVC) is designed for the post-synthesis treatment and stabilization of colloidal CsPbBr₃ NCs in this work. ¹H nuclear magnetic resonance and X-ray photoelectron spectroscopy analysis show that the l-cysteine head has strong interactions with the NCs. The absolute photoluminescence quantum yields of the colloidal NCs are increased from 45.1% of the pristine NCs stabilized with oleic acid/oleyl amine to 91.8% after NOSVC treatment. NOSVC-stabilized CsPbBr₃ colloidal NCs show enhanced stabilities when exposed in polar solvents. The NOSVC-stabilized CsPbBr₃ NCs in a solid film state allow for a photopolymerization to be carried out with the assistance of a photoinitiator. The polymerized films of NOSVC-treated NCs exhibit significantly enhanced stability against thermal radiation, ultraviolet irradiation, and humidity. We also fabricated self-healing polymer films incorporating NOSVC-treated CsPbBr₃ NCs as a green filter for a white light-emitting diode device. The green light-emitting films are very stable in humid environments, revealing the great application potential of NOSVC-treated CsPbBr₃ NCs in flexible display and lighting devices.

Ligand-flexible synthesis of strongly confined perovskite nanocrystals: a microwave synthetic approach

Perovskite nanocrystals (PNCs) and their strongly confined versions have traditionally been synthesized via hot injection methods. However, there is a pressing need for a new synthesis method that offers more flexible surface chemistry, improved optical properties, and greater sample stability. Here we explore and exploit the recently introduced microwave (MW) synthesis method, focusing on temperature and coating ligands, including a polymer ligand for which the hot injection method is unsuitable. The optimized microwave synthetic protocols produce PNCs with better exciton definition, lower polydispersity, and stronger ligand attachment than their hot injection counterparts. A variety of characterization techniques were employed to compare the properties of PNCs produced by the hot injection versus microwave methods. Insight into the molecular basis for the improved PNC properties was provided by FTIR and several NMR experiments that revealed the nature of the attachment of different ligands and their interactions with the PNCs. The overall results demonstrate that MW synthesis is a promising alternative to the HI method, particularly if smaller PNCs with strong quantum confinement are desired.

Ultrahigh Stability of Perovskite Nanocrystals by Using Semiconducting Molecular Species for Displays

The instability of perovskite nanocrystals (NCs) to moisture, heat, and blue light severely hinders their commercial applications in quantum dot displays. Here, organic semiconducting molecules are introduced onto CsPbBr₃ NCs, and the as-obtained CsPbBr₃ NCs have a high photoluminescent quantum yield (PLQY) of 82% and extremely high stability in harsh commercial accelerated operational stability tests (such as high temperature (85 °C) and high humidity (85%)). The products can survive and maintain more than 80% of the initial PL intensity value under high temperature, high humidity, and long-term blue light irradiation for hundreds to thousands of hours. They are among the most stable perovskite NCs and even superior to those encapsulated by inert shells and commercial green-emissive CdSe@ZnS quantum dots (QDs). The mechanism of the exceptional stability has been proposed, mainly including the strong interaction and moderate photocarrier transfer between the quasi type II heterostructure formed by the molecule and CsPbBr₃. By using these stable CsPbBr₃ NCs, a QD-enhanced liquid crystal display prototype has been successfully fabricated with a wide color gamut. This work provides understandings on the functionality of ligands in perovskite fields and a promising prospect in perovskite-based display technologies.

Enhancing the Intrinsic and Extrinsic Stability of Halide Perovskite Nanocrystals for Efficient and Durable Optoelectronics

Over the past few years, metal halide perovskite nanocrystals have been at the forefront of colloidal semiconductor nanomaterial research because of their fascinating properties and potential applications. However, their intrinsic phase instability and chemical degradation under external exposures (high temperature, water, oxygen, and light) are currently limiting the real-world applications of perovskite optoelectronics. To overcome these stability issues, researchers have reported various strategies such as doping and encapsulation. The doping improves the optical and photoactive phase stability, whereas the encapsulation protects the perovskite NCs from external exposures. This perspective discusses the rationale of various strategies to enhance the stability of perovskite NCs and suggests possible future directions for the fabrication of optoelectronic devices with long-term stability while maintaining high efficiency.

Alcohol-Stable Perovskite Nanocrystals and Their In Situ Capsulation with Polystyrene

In recent years, lead halide perovskite nanocrystals (PNCs) have presented potential scalable applications in all fields due to their outstanding properties. However, most commonly used PNCs capped with oleic acid (OA) and oleylamine (OAm) suffer from bad stability in polar solutions and thus require various surface protections with organic or inorganic materials. Encapsulation with highly hydrophobic polystyrene (PS) is one of the most efficient ways to protect PNCs; however, the presently used swelling-shrinking strategy faces several challenges, such as weak interaction between PS chains and the surface ligands in nonpolar media causing a low encapsulation efficiency, and serious aggregation of PS particles during the shrinkage process leading to very different particle sizes. Herein, alcohol-stable polyacrylic acid-capped CsPbBr3 PNCs (i.e., PAA-PNCs) are first synthesized and then in situ encapsulated with PS shells by polymerizing styrene monomer on the PNC surfaces in a polar organic solvent (e.g., ethanol). The in situ PS-encapsulated PAA-PNCs (i.e., PAA-PNCs@iPS) exhibit outstanding monodispersity, remarkable water, heat, and UV stability, high fluorescence activity, and color purity. The unique synthesis strategy and good performances of PAA-PNCs@iPS will boost the applications of PNCs in LEDs, biological imaging, and chemosensing.

The Rise and Future of Discrete Organic-Inorganic Hybrid Nanomaterials

Hybrid nanomaterials (HNs), the combination of organic semiconductor ligands attached to nanocrystal semiconductor quantum dots, have applications that span a range of practical fields, including biology, chemistry, medical imaging, and optoelectronics. Specifically, HNs operate as discrete, tunable systems that can perform prompt fluorescence, energy transfer, singlet fission, upconversion, and/or thermally activated delayed fluorescence. Interest in HNs has naturally grown over the years due to their tunability and broad spectrum of applications. This Review presents a brief introduction to the components of HNs, before expanding on the characterization and applications of HNs. Finally, the future of HN applications is discussed.

4-Bromo-Butyric Acid-Assisted In Situ Passivation Strategy for Superstable All-Inorganic Halide Perovskite CsPbX3 Quantum Dots in Polar Media

A crucial challenge is to develop an in situ passivation treatment strategy for CsPbX₃ (CPX, X=Cl, Br, and I) quantum dots (QDs) and simultaneously retain their luminous efficiency and wavelength. Here, a facile method to significantly improve the stability of the CPX QDs via in situ crystallization with the synergistic effect of 4-bromo-butyric acid (BBA) and oleylamine (OLA) in polar solvents including aqueous solution and a possible fundamental mechanism are proposed. Monodispersed CsPbBr₃ (CPB) QDs obtained in water show high photoluminescence quantum yields (PLQYs) of 86.4 % and their PL features of CPB QDs have no significant change after being dispersed in aqueous solution for 96 h, which implies the structure of CPB QDs is unchanged. The results provide a viable design strategy to synthesize all-inorganic perovskite CPX QDs with strong stability against the attack of polar solvents and shed more light on their surface chemistry.

Ultra-Stable CsPbX3 @Pyrophosphate Nanoparticles in Water over One Year

All-inorganic lead halide perovskite (CsPbX₃ , X = Cl, Br, I, or their mixture) nanocrystals (NCs) have achieved inspiring advancements in optoelectronic fields but still suffer from poor durability when exposed to environmental stimuli such as water, irradiation and heat. Herein, a strategy of employing pyrophosphate as the inert shell for CsPbX₃ NCs is reported. The strong binding between pyrophosphate and CsPbBr₃ surface can stabilize the perovskite structure well. The as-obtained core@shell CsPbBr₃ @NH₄ AlP₂ O₇ NCs exhibit impressive stability against water and maintain the initial optical properties with negligible change in 400 days. Furthermore, significant improvement of irradiation/thermal resistance is realized due to the protecting role of pyrophosphate. The NCs can retain 100% and ≈90% of the original PL after hundreds of heating/cooling cycles and several hundred hours of UV light irradiation, respectively. As a result, the core@shell products can be directly used for high-resolution inkjet printing, enabling the printed fluorescent information to be resistant under harsh environmental conditions. This work provides a promising way for the synthesis of highly stable encapsulated perovskite NCs and demonstrates a great potential in practical applications.

One-pot synthesis of stable and functional hydrophilic CsPbBr3 perovskite quantum dots for "turn-on" fluorescence detection of Mycobacterium tuberculosis

All-inorganic CsPbBr3 perovskite quantum dots (QDs) are widely studied owing to their excellent optoelectronic properties; however, they are usually hydrophobic and unstable in water and thus their biomedical applications are seriously limited. In this study, stable and hydrophilic CsPbBr3 QDs functionalized with carboxyl groups (CsPbBr3-COOH QDs) were prepared in one-pot with the aid of new ligands amino-poly(ethylene glycol)-carboxyl and perfluorooctyltriethoxylsilane. The aqueous solution of CsPbBr3-COOH QDs maintained the initial fluorescence intensity after 8 days of storage; the free carboxyl groups on the surface of CsPbBr3-COOH QDs were covalently conjugated with amino-terminal DNA to construct CsPbBr3 QDs-DNA probes for subsequent application. Then, a biosensing platform utilizing fluorescence resonance energy transfer between hydrophilic CsPbBr3 QDs-DNA and MoS2 nanosheets was developed for the sensitive and selective detection of the Mycobacterium tuberculosis DNA with a low limit of detection of 51.9 pM and the identification of drug-resistant clinical strains. This study advances the preparation of hydrophilic carboxyl-functionalized CsPbBr3 QDs with enhanced stability and extends their application in biomolecule detection.

Synthesis of Stable Lead-Free Cs3 Sb2 (Brx I1- x )9 (0 ≤ x ≤ 1) Perovskite Nanoplatelets and Their Application in CO2 Photocatalytic Reduction

Exploring photocatalysts to foster CO₂ photoreduction into high value-added chemicals is of great significance. Lead halide perovskites (LHPs) have recently been extensively investigated as photocatalysts, owing to their facile fabrication and prominent optoelectronic properties. However, the toxicity of lead and instability will hinder their future large-scale applications. To address these challenges, a series of lead-free Sb-based all-inorganic mixed halide perovskite Cs₃ Sb₂ (Br_x I_{1- x} )₉ (0 ≤ x ≤ 1) nanoplatelets (NPLs) is synthesized. The perovskite NPLs are prepared using a ligand-assisted re-precipitation approach at 50 °C. The authors observe the tunability of their optical band gaps from 2.1 to 2.5 eV, and they can maintain the excellent stability over 120 h under heating at 100 °C or UV light irradiation. The resultant materials are employed as efficient photocatalysts for visible-light driven CO₂ reduction at the gas-solid interface. The Cs₃ Sb₂ (Br_0.7 I_0.3 )₉ perovskite NPLs afford an impressive overall yield of 27.7 µmol g^-1 for the selective photocatalytic conversion of CO₂ into CO. This study represents a significant demonstration for practical artificial photosynthesis by using LHP materials as photocatalysts.

A Charge-Switchable Zwitterionic Peptide for Rapid Detection of SARS-CoV-2 Main Protease

The transmission of SARS-CoV-2 coronavirus has led to the COVID-19 pandemic. Nucleic acid testing while specific has limitations for mass surveillance. One alternative is the main protease (Mpro ) due to its functional importance in mediating the viral life cycle. Here, we describe a combination of modular substrate and gold colloids to detect Mpro via visual readout. The strategy involves zwitterionic peptide that carries opposite charges at the C-/N-terminus to exploit the specific recognition by Mpro . Autolytic cleavage releases a positively charged moiety that assembles the nanoparticles with rapid color changes (t<10 min). We determine a limit of detection for Mpro in breath condensate matrices <10 nM. We further assayed ten COVID-negative subjects and found no false-positive result. In the light of simplicity, our test for viral protease is not limited to an equipped laboratory, but also is amenable to integrating as portable point-of-care devices including those on face-coverings.

Organic building blocks at inorganic nanomaterial interfaces

This tutorial review presents our perspective on designing organic molecules for the functionalization of inorganic nanomaterial surfaces, through the model of an "anchor-functionality" paradigm. This "anchor-functionality" paradigm is a streamlined design strategy developed from a comprehensive range of materials (e.g., lead halide perovskites, II-VI semiconductors, III-V semiconductors, metal oxides, diamonds, carbon dots, silicon, etc.) and applications (e.g., light-emitting diodes, photovoltaics, lasers, photonic cavities, photocatalysis, fluorescence imaging, photo dynamic therapy, drug delivery, etc.). The structure of this organic interface modifier comprises two key components: anchor groups binding to inorganic surfaces and functional groups that optimize their performance in specific applications. To help readers better understand and utilize this approach, the roles of different anchor groups and different functional groups are discussed and explained through their interactions with inorganic materials and external environments.

Perovskite chemical gardens: highly fluorescent microtubes from self-assembly and ion exchange

We report the shape-preserving conversion of self-assembled CaCO3 microtubes to PbCO3 and MAPbBr3 perovskite.

Recent Advances in Synthesis, Properties, and Applications of Metal Halide Perovskite Nanocrystals/Polymer Nanocomposites

Metal halide perovskite nanocrystals (PNCs) have recently garnered tremendous research interest due to their unique optoelectronic properties and promising applications in photovoltaics and optoelectronics. Metal halide PNCs can be combined with polymers to create nanocomposites that carry an array of advantageous characteristics. The polymer matrix can bestow stability, stretchability, and solution-processability while the PNCs maintain their size-, shape- and composition-dependent optoelectronic properties. As such, these nanocomposites possess great promise for next-generation displays, lighting, sensing, biomedical technologies, and energy conversion. The recent advances in metal halide PNC/polymer nanocomposites are summarized here. First, a variety of synthetic strategies for crafting PNC/polymer nanocomposites are discussed. Second, their array of intriguing properties is examined. Third, the broad range of applications of PNC/polymer nanocomposites is highlighted, including light-emitting diodes (LEDs), lasers, and scintillators. Finally, an outlook on future research directions and challenges in this rapidly evolving field are presented.

Application of Perovskite Quantum Dots as Absorber for Perovskite Solar Cell

Perovskite quantum dots (QDs) preserve the attractive properties of perovskite bulk materials and present additional advantages, owing to their quantum confinement effect, leading to their applicability as an absorber in perovskite solar cells. In this article, the issues and advantages of perovskite QDs are analyzed in terms of purification, device fabrication with perovskite QDs, light absorption, charge transport and stability. In addition, promising strategies to enhance perovskite QDs and QD-based solar cells are elucidated based on exchange chemistry (ion and ligand exchange), passivation engineering (ion and ligand passivation) and structure engineering (conventional/inverted, planar/mesoscopic and dimensionally graded structures). All these discussions will give a clue to the further development of perovskite QDs and thus the advancement of QD-based solar cells.

Polysalt ligands achieve higher quantum yield and improved colloidal stability for CsPbBr3 quantum dots

Colloidal lead halide perovskite quantum dots (PQDs) are relatively new semiconductor nanocrystals with great potential for use in optoelectronic applications. They also present a set of new scientifically challenging fundamental problems to investigate and understand. One of them is to address the rather poor colloidal and structural stability of these materials under solution phase processing and/or transfer between solvents. In this contribution, we detail the synthesis of a new family of multi-coordinating, bromide-based polysalt ligands and test their ability to stabilize CsPbBr₃ nanocrystals in polar solutions. The ligands present multiple salt groups involving quaternary cations, namely ammonium and imidazolium as anchors for coordination onto PQD surfaces, along with several alkyl chains with varying chain length to promote solubilization in various conditions. The ligands provide a few key benefits including the ability to repair damaged surface sites, allow rapid ligand exchange and phase transfer, and preserve the crystalline structure and morphology of the nanocrystals. The polysalt-coated PQDs exhibit near unity PLQY and significantly enhanced colloidal stability in ethanol and methanol.

Defect Passivation in Lead-Halide Perovskite Nanocrystals and Thin Films: Toward Efficient LEDs and Solar Cells

Lead-halide perovskites (LHPs), in the form of both colloidal nanocrystals (NCs) and thin films, have emerged over the past decade as leading candidates for next-generation, efficient light-emitting diodes (LEDs) and solar cells. Owing to their high photoluminescence quantum yields (PLQYs), LHPs efficiently convert injected charge carriers into light and vice versa. However, despite the defect-tolerance of LHPs, defects at the surface of colloidal NCs and grain boundaries in thin films play a critical role in charge-carrier transport and nonradiative recombination, which lowers the PLQYs, device efficiency, and stability. Therefore, understanding the defects that play a key role in limiting performance, and developing effective passivation routes are critical for achieving advances in performance. This Review presents the current understanding of defects in halide perovskites and their influence on the optical and charge-carrier transport properties. Passivation strategies toward improving the efficiencies of perovskite-based LEDs and solar cells are also discussed.

Switchable Anion Exchange in Polymer-Encapsulated APbX3 Nanocrystals Delivers Stable All-Perovskite White Emitters

We report a one-step synthesis of halide perovskite nanocrystals embedded in amphiphilic polymer (poly(acrylic acid)-block-poly(styrene), PAA-b-PS) micelles, based on injecting a dimethylformamide solution of PAA-b-PS, PbBr₂, ABr (A = Cs, formamidinium, or both) and "additive" molecules in toluene. These bifunctional or trifunctional short chain organic molecules improve the nanocrystal-polymer compatibility, increasing the nanocrystal stability against polar solvents and high flux irradiation (the nanocrystals retain almost 80% of their photoluminescence after 1 h of 3.2 w/cm² irradiation). If the nanocrystals are suspended in toluene, the coil state of the polymer allows the nanocrystals to undergo halide exchange, enabling emission color tunability. If the nanocrystals are suspended in methanol, or dried as powders, the polymer is in the globule state, and they are inert to halide exchange. By mixing three primary colors we could prepare stable, multicolor emissive samples (for example, white emitting powders) and a UV-to-white color converting layer for light-emitting diodes entirely made of perovskite nanocrystals.

Ligand Locking on Quantum Dot Surfaces via a Mild Reactive Surface Treatment

At the outermost surface of colloidal QDs are organic surface ligands which dynamically bind and release in solution to control the growth kinetics, control the size/shape of the crystals, passivate surface states, and provide colloidal stability through favorable interactions with the solvent. However, the dynamicity comes at the expense of the stability of the QD suspension. Here, we show that ligands can be permanently locked on the QD surface by a thin layer of an inert metal oxide which forms within the ligand shell, over the headgroup. By interrogating the surface chemistry with different spectroscopic methods, we prove the ligand locking on the QD surface. As a result, an exceptional stability of the coated QD inks is achieved in a wide concentration range, even in the presence of chemically competing surface ligands in solution. We anticipate that this critical breakthrough will benefit different areas related to colloidal QDs, spanning from single-particle studies to displays and solar cells and biological applications. Furthermore, the same chemistry could be easily translated to surface treatments of bulk materials and thin films.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

Multidentate ligand approach for conjugation of perovskite quantum dots to biomolecules

Building compatible surface on perovskite quantum dots (PQDs) for applications like sensing analytes in aqueous medium is highly challenging and if achieved by simple means can revolutionize disease diagnostics. The present work reports the surface engineering of CsPbBr₃ QDs via "simple ligand exchange process" to achieve water-compatible QDs towards detection of biomolecules. The monodentate oleic acid ligand in CsPbBr₃ QDs is exchanged with dicarboxylic acid containing (bidentate) ligands such as folic acid (FA), ethylenediamine tetra-acetic acid (EDTA), succinic acid (SA) and glutamic acid (GA) to develop an efficient water-compatible PQD-ligand system. optical and theoretical studies showed the existence of a stronger binding between the perovskite and succinic acid ligand as compared to oleic acid (OA) and all other ligands. Replacement of OA with SA and retention of crystal structure is validated using spectroscopic and microscopic tools. It is observed that SA ligands facilitate better electronic coupling with PQDs and show significant improvement in fluorescence and stability. Further N-Hydroxy succinimide (NHS), which is a well-known compound to activate carboxyl groups, is used to bind onto SA PQDs as multidentate ligand, to form water stable PQDs. SA PQDs react with NHS (in water) to form multidentate ligand passivated PQDs that show very high photoluminescence (PL) as compared to OA PQDs in toluene. This also results in the formation of an NHS ester that allows bioconjugation with PQDs. This simple probe in water is further utilized for sensing a highly hydrophilic bovine serum albumin (BSA) protein as a model target to demonstrate the potential and effectiveness of this process to create compatible QDs for the successful conjugation of biomolecules. Although the focus of this work is to demonstrate bioconjugation and not achieving higher sensitivity levels, the intrinsic sensing level of these compatible QDs towards BSA shows a detection limit of 51.47 nM, which is above par with other reports in literature.

Improved photophysical properties and durability of CsPbBr3 NCs endowed by inorganic oxoacid and bromide ions

All-inorganic lead halide perovskite nanocrystals (NCs) have been promising candidates in various optoelectrical fields. It is still challenging to further enhance their optical properties and stability to meet the requirements of practical applications. Herein, we develop a passivation strategy towards CsPbBr3 NCs by using inorganic phosphate and bromide anions. Phosphate can coordinate with lead ions on CsPbBr3 NCs as capping ligands; meanwhile, excess bromide can strengthen the repair of surface trapping sites. The treated NCs exhibit near-unity quantum yield and boosted radiative recombination. In addition, obvious enhancement has been realized in their durability against polar solvents. A white light emitting diode (WLED) has been fabricated by employing the passivated NCs as a green light source, which possesses high luminous efficiency and operational stability.

Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals

Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.

Trioctylphosphine-Assisted Pre-protection Low-Temperature Solvothermal Synthesis of Highly Stable CsPbBr3/TiO2 Nanocomposites

Lead halide perovskite quantum dots (PQDs) are reported as a promising branch of perovskites, which have recently emerged as a field in luminescent materials research. However, before the practical applications of PQDs can be realized, the problem of poor stability has not yet been solved. Herein, we propose a trioctylphosphine (TOP)-assisted pre-protection low-temperature solvothermal synthesis of highly stable CsPbBr₃/TiO₂ nanocomposites. Due to the protection of branched ligands and the lower temperature of shell formation, these TOP-modified CsPbBr₃ PQDs are successfully incorporated into a TiO₂ monolith without a loss of fluorescence intensity. Because the excellent nature of both parent materials is preserved in CsPbBr₃/TiO₂ nanocomposites, it is found that the as-prepared CsPbBr₃/TiO₂ nanocomposites not only display excellent photocatalytic activity but also yield improved PL stability, enabling us to build highly stable white light-emitting diodes and to photodegrade rhodamine B.

Ligand-Assisted Direct Photolithography of Perovskite Nanocrystals Encapsulated with Multifunctional Polymer Ligands for Stable, Full-Colored, High-Resolution Displays

Micropatterns with a high stability, definition, and resolution are an absolute requirement in advanced display technology. Herein, patternable perovskite nanocrystals (PNCs) with excellent stability were prepared by exchanging pristine ligands with multifunctional polymer ligands, poly(2-cinnamoyloxyethyl methacrylate). The polymer backbone contains a cinnamoyl group that has been widely employed as a photo-cross-linker under 365 nm UV irradiation. Also, the terminal group is readily adjustable among NH₃Cl, NH₃Br, and NH₃I, allowing us to obtain multicolored PNCs via instant anion exchange. Furthermore, the resulting ligand exchanged PNCs exhibited enhanced stability toward polar solvents without any undesirable influence on the structural or optical properties of the PNCs. Using anion exchanged PNCs, RGB microarrays with a subpixel size of 10 μm × 40 μm were successfully demonstrated. Our results highlight the versatility and feasibility of a simplified patterning strategy for nanomaterials, which can be generally applied in the fabrication of various optoelectronic devices.

Synthesis of Lead-Free Cs2AgBiX6 (X = Cl, Br, I) Double Perovskite Nanoplatelets and Their Application in CO2 Photocatalytic Reduction

Morphology control represents an important strategy for the development of functional nanomaterials and has yet to be achieved in the case of promising lead-free double perovskite materials so far. In this work, high-quality Cs₂AgBiX₆ (X = Cl, Br, I) two-dimensional nanoplatelets were synthesized through a newly developed synthetic procedure. By analyzing the optical, morphological, and structural evolutions of the samples during synthesis, we elucidated that the growth mechanism of lead-free double perovskite nanoplatelets followed a lateral growth process from mono-octahedral-layer (half-unit-cell in thickness) cluster-based nanosheets to multilayer (three to four unit cells in thickness) nanoplatelets. Furthermore, we demonstrated that Cs₂AgBiBr₆ nanoplatelets possess a better performance in photocatalytic CO₂ reduction compared with their nanocube counterpart. Our work demonstrates the first example with two-dimensional morphology of this important class of lead-free perovskite materials, shedding light on the synthetic manipulation and the application integration of such promising materials.

Luminescent Quantum Dots Stabilized by N-Heterocyclic Carbene Polymer Ligands

We have tested the ability of N-heterocyclic carbene (NHC)-modified ligands to coordinate and stabilize luminescent CdSe-ZnS core-shell quantum dot (QD) dispersions in hydrophilic media. In particular, we probed the effects of ligand structure and coordination number on the coating affinity to the nanocrystals. We find that such NHC-based ligands rapidly coordinate onto the QDs (requiring ∼5-10 min of reaction time), which reflects the soft Lewis base nature of the NHC groups, with its two electrons sharing capacity. Removal of the hydrophobic cap and promotion of carbene-driven coordination on the nanocrystals have been verified by ¹H NMR spectroscopy, while ¹³C NMR was used to identify the formation of carbene-Zn complexes. The newly coated QD dispersions exhibit great long-term colloidal stability over a wide range of conditions. Additionally, we find that coordination onto the QD surfaces affects the optical and spectroscopic properties of the nanocrystals. These include a size-dependent red-shift of the absorption and fluorescence spectra and a pronounced increase in the measured fluorescence intensity when the samples are stored under white light exposure compared to those stored in the dark.