Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange

Layered/Olivine Composite Structure-Induced Stable Gradient Interfacial Chemistry toward High-Temperature Lithium-Ion Batteries

The state-of-the-art layered oxide as the cathode material for lithium-ion batteries has attracted wide attention; however, harsh operations of high-energy and high-safety energy-storage technology at high temperature is challenging owing to the aggravated structural instability and parasitic reactions at the cathodes. Herein, the layered/olivine composite structure architecture is designed at the grain surface to govern constant electrochemistry in a harsh environment, and a gradient LiF interlayer is developed onto the cathodes to suppress the interfacial degradation. By a combination of interfacial-sensitive characterizations and theoretical analysis at the cathode/interface, the formation mechanism of this special interphase induced by the composite structure cathode is revealed. The composite structure cathode could deliver an excellent high-temperature cycling stability with 90.8% retention for 300 cycles in the half cell and 95.6% retention for 1000 cycles in the pouch cell and simultaneously enhances ∼51% of the thermal stability, which broadens the approaches for developing high-stable cathodes that work in extreme environments.

Achieving High-Capacity Cathode Presodiation Agent Via Triggering Anionic Oxidation Activity in Sodium Oxide

Compensating for the irreversible loss of limited active sodium (Na) is crucial for enhancing the energy density of practical sodium-ion batteries (SIBs) full-cell, especially when employing hard carbon anode with initially lower coulombic efficiency. Introducing sacrificial cathode presodiation agents, particularly those that own potential anionic oxidation activity with a high theoretical capacity, can provide additional sodium sources for compensating Na loss. Herein, Ni atoms are precisely implanted at the Na sites within Na2O framework, obtaining a (Na0.89Ni0.05□0.06)2O (Ni-Na2O) presodiation agent. The synergistic interaction between Na vacancies and Ni catalyst effectively tunes the band structure, forming moderate Ni-O covalent bonds, activating the oxidation activity of oxygen anion, reducing the decomposition overpotential to 2.8 V (vs Na/Na+), and achieving a high presodiation capacity of 710 mAh/g≈Na2O (Na2O decomposition rate >80%). Incorporating currently-modified presodiation agent with Na3V2(PO4)3 and Na2/3Ni2/3Mn1/3O2 cathodes, the energy density of corresponding Na-ion full-cells presents an essential improvement of 23.9% and 19.3%, respectively. Further, not limited to Ni-Na2O, the structure-function relationship between the anionic oxidation mechanism and electrode-electrolyte interface fabrication is revealed as a paradigm for the development of sacrificial cathode presodiation agent.

Nonflammable All-Fluorinated Electrolyte Enabling High-Voltage and High-Safety Lithium-Ion Cells

In this study, a nonflammable all-fluorinated electrolyte for lithium-ion cells with a Li(Ni0.8Mn0.1Co0.1)O2 cathode is investigated under high voltages. This electrolyte, named FT46, consists of fluoroethylene carbonate (FEC) and bis(2,2,2-trifluoroethyl) carbonate (TFEC) in a mass ratio of 4:6. Compared to a commercially available electrolyte and several other fluorinated electrolytes, cells containing FT46 demonstrate significantly better cycling performances under high voltage (3.0-4.5 V). This result may be ascribed to the generation of a stable, smooth, and thin passivation layer and the improved solvation structure formed by FT46. The LiF-rich passivation layer strengthens the electrode/electrolyte interface, inhibits the degradation of the electrode, and suppresses side reactions between the electrodes and electrolytes under high voltage. The solvation structure formed by FT46 is derived from anions, enabling an enhanced Li+ migration rate and inhibiting lithium plating generation. Additionally, due to the nonflammability of the electrolyte and the stable passivation layers, FT46 cells also demonstrate promising safety characteristics when exposed to typical abusive conditions, such as thermal abuse, mechanical abuse, and electrical abuse.

Approaching Sustainable Lithium-Ion Batteries through Voltage-Responsive Smart Prelithiation Separator with Surface-Engineered Sacrificial Lithium Agents

The surge in lithium-ion batteries has heightened concerns regarding metal resource depletion and the environmental impact of spent batteries. Battery recycling has become paramount globally, but conventional techniques, while effective at extracting transition metals like cobalt and nickel from cathodes, often overlook widely used spent LiFePO4 due to its abundant and low-cost iron content. Direct regeneration, a promising approach for restoring deteriorated cathodes, is hindered by practicality and cost issues despite successful methods like solid-state sintering. Hence, a smart prelithiation separator based on surface-engineered sacrificial lithium agents is proposed. Benefiting from the synergistic anionic and cationic redox, the prelithiation separator can intelligently release or intake active lithium via voltage regulation. The staged lithium replenishment strategy was implemented, successfully restoring spent LiFePO4's capacity to 163.7 mAh g-1 and a doubled life. Simultaneously, the separator can absorb excess active lithium up to approximately 600 mAh g-1 below 2.5 V to prevent over-lithiation of the cathode This innovative, straightforward, and cost-effective strategy paves the way for the direct regeneration of spent batteries, expanding the possibilities in the realm of lithium-ion battery recycling.

Thermal Runaway Mechanism in Ni-Rich Cathode Full Cells of Lithium-Ion Batteries: The Role of Multidirectional Crosstalk

Crosstalk, the exchange of chemical species between battery electrodes, significantly accelerates thermal runaway (TR) of lithium-ion batteries. To date, the understanding of their main mechanisms has centered on single-directional crosstalk of oxygen (O2) gas from the cathode to the anode, underestimating the exothermic reactions during TR. However, the role of multidirectional crosstalk in steering additional exothermic reactions is yet to be elucidated due to the difficulties of correlative in situ analyses of full cells. Herein, the way in which such crosstalk triggers self-amplifying feedback is elucidated that dramatically exacerbates TR within enclosed full cells, by employing synchrotron-based high-temperature X-ray diffraction, mass spectrometry, and calorimetry. These findings reveal that ethylene (C2H4) gas generated at the anode promotes O2 evolution at the cathode. This O2 then returns to the anode, further promoting additional C2H4 formation and creating a self-amplifying loop, thereby intensifying TR. Furthermore, CO2, traditionally viewed as an extinguishing gas, engages in the crosstalk by interacting with lithium at the anode to form Li2CO3, thereby accelerating TR beyond prior expectations. These insights have led to develop an anode coating that impedes the formation of C2H4 and O2, to effectively mitigate TR.

An in-situ polymerization strategy for gel polymer electrolyte Si||Ni-rich lithium-ion batteries

Coupling the Si-based anodes with nickel-rich LiNixMnyCo1-x-yO2 cathodes (x ≥ 0.8) in the energy-dense cell prototype suffers from the mechanical instability of the Li-Si alloys, cathode collapse upon the high-voltage cycling, as well as the severe leakage current at elevated temperatures. More seriously, the cathode-to-anode cross-talk effect of transitional metal aggravates the depletion of the active Li reservoir. To reconcile the cation utilization degree, stress dissipation, and extreme temperature tolerance of the Si-based anode||NMC prototype, we propose a gel polymer electrolyte to reinforce the mechanical integrity of Si anode and chelate with the transitional cations towards the stabilized interfacial property. As coupling the conformal gel polymer electrolyte encapsulation with the spatial arranged Si anode and NMC811 cathode, the 2.7 Ah pouch-format cell could achieve the high energy density of 325.9 Wh kg-1 (based on the whole pouch cell), 88.7% capacity retention for 2000 cycles, self-extinguish property as well as a wide temperature tolerance. Therefore, this proposed polymerization strategy provides a leap toward the secured Li batteries.

Ultra-High Temperature Operated Ni-Rich Cathode Stabilized by Thermal Barrier for High-Energy Lithium-Ion Batteries

The pursuit of high energy density batteries has expedited the fast development of Ni-rich cathodes. However, the chemo-mechanical degradation induced by local thermal accumulation and anisotropic lattice strain is posing great obstacles for its wide applications. Herein, a highly-antioxidative BaZrO3 thermal barrier engineered LiNi0.8Co0.1Mn0.1O2 cathode through an in situ construction strategy is first reported to circumvent the above issues. It is found that the Zr ions are incorporated to Ni-rich material lattice and influence on the topotactic lithiation as well as enhance the oxygen electronegativity through the rigid Zr─O bonds, which effectively alleviates the lattice strain propagation and decreases the excessive oxidization of lattice oxygen for charge compensation. More importantly, the BaZrO3 thermal barrier with an ultra-low thermal conductivity validly impedes the fast heat exchange between electrode and electrolyte to mitigate the severe surface side reactions. This helps an ultra-high mass loading Li-ion pouch cell deliver a specific energy density of 690 Wh kg-1 at active material level and an excellent capacity retention of 92.5% after 1400 cycles under 1 C at 25 °C. Tested at a high temperature of 55 °C, the pouch type full-cell also exhibits 88.7% in capacity retention after 1200 cycles.

Smart Solid-State Interphases Enable High-Safety and High-Energy Practical Lithium Batteries

With the electrochemical performance of batteries approaching the bottleneck gradually, it is increasingly urgent to solve the safety issue. Herein, all-in-one strategy is ingeniously developed to design smart, safe, and simple (3S) practical pouch-type LiNi0.8Co0.1Mn0.1O2||Graphite@SiO (NCM811||Gr@SiO) cell, taking full advantage of liquid and solid-state electrolytes. Even under the harsh thermal abuse and high voltage condition (100 °C, 3-4.5 V), the pouch-type 3S NCM811||Gr@SiO cell can present superior capacity retention of 84.6% after 250 cycles (based pouch cell: 47.8% after 250 cycles). More surprisingly, the designed 3S NCM811||Gr@SiO cell can efficiently improve self-generated heat T1 by 45 °C, increase TR triggering temperature T2 by 40 °C, and decrease the TR highest T3 by 118 °C. These superior electrochemical and safety performances of practical 3S pouch-type cells are attributed to the robust and stable anion-induced electrode-electrolyte interphases and local solid-state electrolyte protection layer. All the fundamental findings break the conventional battery design guidelines and open up a new direction to develop practical high-performance batteries.

Operando Building of a Superior Interface Hybrid Film Enables Chemomechanically Durable Co-Free Ni-Rich Cathodes

The Co-free Ni-rich layered cathodes become pivotal to reduce cost and increase benefit toward next-generation Li-ion batteries yet raise a major challenge for their extremely fragile cathode-electrolyte interface (CEI) film. Herein, we report the in situ construction of the Si/B-enriched organic-inorganic hybrid CEI films on LiNi0.9Mn0.1O2 (NM91) with the assistance of tris(trimethylsilyl) borate (TMSB) additive. The hybrid film exhibits superior Young's modulus, mechanical strength, and ductility, which greatly dissipate the microstrain of Co-free Ni-rich cathodes under various states of charge with high structural integrity. Furthermore, the surface oxygen anions have been significantly stabilized by bonding with the Si and B ions of TMSB with high safety. These merits enable a durable Co-free Ni-rich layered cathode with 96.9% and 87.7% capacity retentions (versus 72.7% and 70.2% of NM91) at a high rate of 5C and a high-temperature of 55 °C after 100 cycles. In a pouch-type full cell, 88.8% of initial capacity is still maintained after cycling at 1C for 500 times, greatly expediting the development and application of Co-free Ni-rich layered cathodes.

Oxygen Vacancies Driven by Co in the Deeply Charged State Inducing Intragranular Cracking of Ni-Rich Cathodes

Intragranular cracking within the material structure of Ni-rich (LiNixCoyMn1 - x - y, x ≥0.9) cathodes greatly threatens cathode integrity and causes capacity degradation, yet its atomic-scale incubation mechanism is not completely elucidated. Notably, the physicochemical properties of component elements fundamentally determine the material structure of cathodes. Herein, a diffusion-controlled incubation mechanism of intragranular cracking is unraveled, and an underlying correlation model with Co element is established. Multi-dimensional analysis reveals that oxygen vacancies appear due to the charge compensation from highly oxidizing Co ions in the deeply charged state, driving the transition metal migration to Li layer and layered to rock-salt phase transition. The local accumulation of two accompanying tensile strains collaborates to promote the nucleation and growth of intragranular cracks along the fragile rock-salt phase domain on (003) plane. This study focuses on the potential risks posed by Co to the architectural and thermal stability of Ni-rich cathodes and is dedicated to the compositional design and performance optimization of Ni-rich cathodes.

Oxygen vacancy chemistry in oxide cathodes

Secondary batteries are a core technology for clean energy storage and conversion systems, to reduce environmental pollution and alleviate the energy crisis. Oxide cathodes play a vital role in revolutionizing battery technology due to their high capacity and voltage for oxide-based batteries. However, oxygen vacancies (OVs) are an essential type of defect that exist predominantly in both the bulk and surface regions of transition metal (TM) oxide batteries, and have a crucial impact on battery performance. This paper reviews previous studies from the past few decades that have investigated the intrinsic and anionic redox-mediated OVs in the field of secondary batteries. We focus on discussing the formation and evolution of these OVs from both thermodynamic and kinetic perspectives, as well as their impact on the thermodynamic and kinetic properties of oxide cathodes. Finally, we offer insights into the utilization of OVs to enhance the energy density and lifespan of batteries. We expect that this review will advance our understanding of the role of OVs and subsequently boost the development of high-performance electrode materials for next-generation energy storage devices.

Gradient Interphase Engineering Enabled by Anionic Redox for High-Voltage and Long-Life Li-Ion Batteries

Intelligent utilization of the anionic redox reaction (ARR) in Li-rich cathodes is an advanced strategy for the practical implementation of next-generation high-energy-density rechargeable batteries. However, due to the intrinsic complexity of ARR (e.g., nucleophilic attacks), the instability of the cathode-electrolyte interphase (CEI) on a Li-rich cathode presents more challenges than typical high-voltage cathodes. Here, we manipulate CEI interfacial engineering by introducing an all-fluorinated electrolyte and exploiting its interaction with the nucleophilic attack to construct a gradient CEI containing a pair of fluorinated layers on a Li-rich cathode, delivering enhanced interfacial stability. Negative/detrimental nucleophilic electrolyte decomposition has been efficiently evolved to further reinforce CEI fabrication, resulting in the construction of LiF-based indurated outer shield and fluorinated polymer-based flexible inner sheaths. Gradient interphase engineering dramatically improved the capacity retention of the Li-rich cathode from 43 to 71% after 800 cycles and achieved superior cycling stability in anode-free and pouch-type full cells (98.8% capacity retention, 220 cycles), respectively.

Protonation Stimulates the Layered to Rock Salt Phase Transition of Ni-Rich Sodium Cathodes

Protonation of oxide cathodes triggers surface transition metal dissolution and accelerates the performance degradation of Li-ion batteries. While strategies are developed to improve cathode material surface stability, little is known about the effects of protonation on bulk phase transitions in these cathode materials or their sodium-ion battery counterparts. Here, using NaNiO2 in electrolytes with different proton-generating levels as model systems, a holistic picture of the effect of incorporated protons is presented. Protonation of lattice oxygens stimulate transition metal migration to the alkaline layer and accelerates layered-rock-salt phase transition, which leads to bulk structure disintegration and anisotropic surface reconstruction layers formation. A cathode that undergoes severe protonation reactions attains a porous architecture corresponding to its multifold performance fade. This work reveals that interactions between electrolyte and cathode that result in protonation can dominate the structural reversibility/stability of bulk cathodes, and the insight sheds light for the development of future batteries.

Enabling Electrochemical-Mechanical Robustness of Ultra-High Ni Cathode via Self-Supported Primary-Grain-Alignment Strategy

The electrochemical-mechanical degradation of ultrahigh Ni cathode for lithium-ion batteries is a crucial aspect that limits the cycle life and safety of devices. Herein, the study reports a facile strategy involving rational design of primary grain crystallographic orientation within polycrystalline cathode, which well enhanced its electro-mechanical strength and Li+ transfer kinetics. Ex situ and in situ experiments/simulations including cross-sectional particle electron backscatter diffraction (EBSD), single-particle micro-compression, thermogravimetric analysis combined with mass spectrometry (TGA-MS), and finite element modeling reveal that, the primary-grain-alignment strategy effectively mitigates the particle pulverization, lattice oxygen release thereby enhances battery cycle life and safety. Besides the preexisting doping and coating methodologies to improve the stability of Ni-rich cathode, the primary-grain-alignment strategy, with no foreign elements or heterophase layers, is unprecedently proposed here. The results shed new light on the study of electrochemical-mechanical strain alleviation for electrode materials.

Thermal Stability and Outgassing Behaviors of High-nickel Cathodes in Lithium-ion Batteries

LiNiO2 -based high-nickel layered oxide cathodes are regarded as promising cathode materials for high-energy-density automotive lithium batteries. Most of the attention thus far has been paid towards addressing their surface and structural instability issues brought by the increase of Ni content (>90 %) with an aim to enhance the cycle stability. However, the poor safety performance remains an intractable problem for their commercialization in the market, yet it has not received appropriate attention. In this review, we focus on the gas generation and thermal degradation behaviors of high-Ni cathodes, which are critical factors in determining their overall safety performance. A comprehensive overview of the mechanisms of outgassing and thermal runaway reactions is presented and analyzed from a chemistry perspective. Finally, we discuss the challenges and the insights into developing robust, safe high-Ni cathodes.

Multifunctional electrolyte additive for realizing high-temperature and high-voltage lithium metal batteries

Methyl 1H-1,2,4-triazole-3-carboxylate (MTC) was added into lithium metal batteries as an electrolyte additive, and not only did this addition lead to formation of solid electrolyte interfaces to protect both the anode and cathode, but the added MTC also served as a Lewis base in removing HF from the electrolyte to prevent the electrolyte from deteriorating. Therefore, the addition of MTC, in an appropriate amount, can be very effective at improving the electrochemical performance of lithium metal batteries.

Influence of Al doping on the structure and electrochemical performance of the Co-free LiNi0.8Mn0.2O2 cathode material

The transformation from LiNi1-x-yCoxMnyO2 (NCM) cathodes to Co-free LiNi1-xMnxO2 (NM) cathodes is considered as an effective solution for the electric vehicle (EV) industry to deal with the high cost of cobalt. However, severe Li/Ni disorder, structural instability and poor cycling stability are the main obstacles to their practical application. Al doping has proven to be an effective method to improve the electrochemical performance of Ni-rich NCMs. However, with regard to Ni-rich Co-free NM cathodes, the influence of Al doping on the structural stability and electrochemical performance of NM cathodes is still not clear. In this work, Al doped LiNi0.8Mn0.2-xAlxO2 cathodes are designed and their structural stability and electrochemical performance are investigated by a combination of XRD, SEM, TEM, CV, GITT, cycling testing and EIS techniques. As a result, Al doping can effectively inhibit Li/Ni disorder and improve the structural and thermal stability. In detail, 5% is the optimal doping amount for LiNi0.8Mn0.2O2 cathodes to obtain the best electrochemical performance and the LiNi0.8Mn0.15Al0.05O2 cathode shows an excellent capacity retention of 91.97% after 300 cycles at 3.0-4.3 V. This work provides an effective strategy for the development of Ni-rich Co-free NM cathodes.

Manganese and Cobalt-Free Ultrahigh-Ni-Rich Single-Crystal Cathode for High-Performance Lithium Batteries

Current commercial nickel (Ni)-rich Mn, Co, and Al-containing cathodes are employed in high-energy-density lithium (Li) batteries all around the globe. The presence of Mn/Co in them brings out several problems, such as high toxicity, high cost, severe transition-metal dissolution, and quick surface degradation. Herein, a Mn/Co-free ultrahigh-Ni-rich single-crystal LiNi_0.94Fe_0.05Cu_0.01O₂ (SCNFCu) cathode with acceptable electrochemical performance is benchmarked against a Mn/Co-containing cathode. Despite having a slightly lower discharge capacity, the SCNFCu cathode retaining 77% of its capacity across 600 deep cycles in full-cell outperforms comparable to a high-Ni single-crystal LiNi_0.9Mn_0.05Co_0.05O₂ (SCNMC; 66%) cathode. It is shown that the stabilizing ions Fe/Cu in the SCNFCu cathode reduce structural disintegration, undesirable side reactions with the electrolyte, transition-metal dissolution, and active Li loss. This discovery provides a new extent for cathode material development for next-generation high-energy, Mn/Co-free Li batteries due to the compositional tuning flexibility and quick scalability of SCNFCu, which is comparable to the SCNMC cathode.

Having Your Cake and Eating It Too: Electrode Processing Approach Improves Safety and Electrochemical Performance of Lithium-Ion Batteries

A layered Li[Ni_xCo_yMn_1-x-y]O₂ (NCM)-based cathode is preferred for its high theoretical specific capacity. However, the two main issues that limit its practical application are severe safety issues and excessive capacity decay. A new electrode processing approach is proposed to synergistically enhance the electrochemical and safety performance. The polyimide's (PI) precursor is spin-coated on the LiNi_0.5Co_0.2Mn_0.3O₂ (NCM523) electrode sheet, and the homogeneous sulfonated PI layer is in situ produced by thermal imidization reaction. The PI-spin coated (PSC) layer provides improvements in capacity retention (86.47% vs 53.77% after 150 cycles at 1 C) and rate performance (99.21% enhancement at 5 C) as demonstrated by the NCM523-PSC||Li half-cell. The NCM523-PSC||graphite pouch full cell proves enhanced capacity retention (76.62% vs 58.58% after 500 cycles at 0.5 C) as well. The thermal safety of the NCM523-PSC cathode-based pouch cell is also significantly improved, with the critical temperature of thermal safety T₁ (the beginning temperature of obvious self-heating temperature) and thermal runaway temperature T₂ increased by 60.18 and 44.59 °C, respectively. Mechanistic studies show that the PSC layer has multiple effects as a passivation layer such as isolation of electrode-electrolyte contact, oxygen release suppression, solvation structure tuning, and the decomposition of carbonate solvents as well as LiPF₆ inhibition. This work provides a new path for a cost-effective and scalable design of electrode decoration with synergistic safety-electrochemical kinetics enhancement.

Surface Lattice Modulation through Chemical Delithiation toward a Stable Nickel-Rich Layered Oxide Cathode

Nickel-rich layered oxides (NLOs) are considered as one of the most promising cathode materials for next-generation high-energy lithium-ion batteries (LIBs), yet their practical applications are currently challenged by the unsatisfactory cyclability and reliability owing to their inherent interfacial and structural instability. Herein, we demonstrate an approach to reverse the unstable nature of NLOs through surface solid reaction, by which the reconstructed surface lattice turns stable and robust against both side reactions and chemophysical breakdown, resulting in improved cycling performance. Specifically, conformal La(OH)₃ nanoshells are built with their thicknesses controlled at nanometer accuracy, which act as a Li⁺ capturer and induce controlled reaction with the NLO surface lattices, thereby transforming the particle crust into an epitaxial layer with localized Ni/Li disordering, where lithium deficiency and nickel stabilization are both achieved by transforming oxidative Ni³⁺ into stable Ni²⁺. An optimized balance between surface stabilization and charge transfer is demonstrated by a representative NLO material, namely, LiNi_0.83Co_0.07Mn_0.1O₂, whose surface engineering leads to a highly improved capacity retention and excellent rate capability with a strong capability to inhibit the crack of NLO particles. Our study highlights the importance of surface chemistry in determining chemical and structural behaviors and paves a research avenue in controlling the surface lattice for the stabilization of NLOs toward reliable high-energy LIBs.

Surface Stabilization of Cobalt-Free LiNiO2 with Niobium for Lithium-Ion Batteries

Lithium nickel oxide (LiNiO₂) is a promising next-generation cathode material for lithium-ion batteries (LIBs), offering exceptionally high specific capacity and reduced material cost. However, the poor structural, surface, and electrochemical stabilities of LiNiO₂ result in rapid loss of capacity during prolonged cycling, making it unsuitable for application in commercial LIBs. Herein, we demonstrate that incorporation of a small amount of niobium effectively suppresses the structural and surface degradation of LiNiO₂. The niobium-treated LiNiO₂ retains 82% of its initial capacity after 500 cycles in full cells with a graphite anode compared to 73% for untreated LiNiO₂. We utilize a facile method for incorporating niobium, which yields Li_xNbO_y phase formation as a surface coating on the primary particles. Through a combination of X-ray diffraction, electron microscopy, and electrochemical analyses, we show that the resulting niobium coating reduces active material loss over long-term cycling and enhances lithium-ion diffusion kinetics. The enhanced structural integrity and electrochemical performance of the niobium-treated LiNiO₂ are correlated to a reduction in the formation of nanopore defects during cycling compared to the untreated LiNiO₂.

Thermal Runaway of Nonflammable Localized High-Concentration Electrolytes for Practical LiNi0.8 Mn0.1 Co0.1 O2 |Graphite-SiO Pouch Cells

With continuous improvement of batteries in energy density, enhancing their safety is becoming increasingly urgent. Herein, practical high energy density LiNi0.8 Mn0.1 Co0.1 O2 |graphite-SiO pouch cell with nonflammable localized high concentration electrolyte (LHCE) is proposed that presents unique self-discharge characteristic before thermal runaway (TR), thus effectively reducing safety hazards. Compared with the reference electrolyte, pouch cell with nonflammable LHCE can increase self-generated heat temperature by 4.4 °C, increase TR triggering temperature by 47.3 °C, decrease the TR highest temperature by 71.8 °C, and extend the time from self-generated heat to triggering TR by ≈8 h. In addition, the cell with nonflammable LHCE presents superior high voltage cycle stability, attributed to the formation of robust inorganic-rich electrode-electrolyte interphase. The strategy represents a pivotal step forward for practical high energy and high safety batteries.

A medium-entropy transition metal oxide cathode for high-capacity lithium metal batteries

The limited capacity of the positive electrode active material in non-aqueous rechargeable lithium-based batteries acts as a stumbling block for developing high-energy storage devices. Although lithium transition metal oxides are high-capacity electrochemical active materials, the structural instability at high cell voltages (e.g., >4.3 V) detrimentally affects the battery performance. Here, to circumvent this issue, we propose a Li_1.46Ni_0.32Mn_1.2O_4-x (0 < x < 4) material capable of forming a medium-entropy state spinel phase with partial cation disordering after initial delithiation. Via physicochemical measurements and theoretical calculations, we demonstrate the structural disorder in delithiated Li_1.46Ni_0.32Mn_1.2O_4-x, the direct shuttling of Li ions from octahedral sites to the spinel structure and the charge-compensation Mn³⁺/Mn⁴⁺ cationic redox mechanism after the initial delithiation. When tested in a coin cell configuration in combination with a Li metal anode and a LiPF₆-based non-aqueous electrolyte, the Li_1.46Ni_0.32Mn_1.2O_4-x-based positive electrode enables a discharge capacity of 314.1 mA h g⁻¹ at 100 mA g⁻¹ with an average cell discharge voltage of about 3.2 V at 25 ± 5 °C, which results in a calculated initial specific energy of 999.3 Wh kg⁻¹ (based on mass of positive electrode’s active material).

Structural instability is a major drawback of high-capacity lithium-based battery cathodes. Here, the authors report a cathode active material with a medium-entropy state created by partial cation disordering capable of restraining the structural evolution in the high-capacity operated spinel phase.

A High-Energy and Safe Lithium Battery Enabled by Solid-State Redox Chemistry in a Fireproof Gel Electrolyte

Recent years have witnessed thriving efforts in pursuing high-energy batteries at an unaffordable cost of safety. Herein, a high-energy and safe quasi-solid-state lithium battery is proposed by solid-state redox chemistry of polymer-based molecular Li₂ S cathode in a fireproof gel electrolyte. This chemistry fully eliminates not only the negative effect of extremely reactive Li metal and oxygen species on cell safety but also the damage of electrode reversibility by soluble redox intermediates. The molecular Li₂ S cathode exhibits an exceptional lifetime of 2000 cycles, 100% Coulombic efficiency, high capacity of 830 mA h g^-1 with ultralow capacity loss of 0.005-0.01% per cycle and superior rate capability up to 10 C. Meanwhile, it shows high stability in the carbonate-involving electrolyte for maximizing the compatibility with carbonate-efficient Si anode. The optimized cell chemistry exerts high energy over 750 W h kg^-1 for 500 cycles with fast rate response, high-temperature adaptability, and no self-discharge. A fire-retardant composite gel electrolyte is developed to further strengthen the intrinsic safe redox between the Li₂ S cathode and the Si anode, which secures remarkable safety against extreme abuse of overheating, short circuits, and mechanical damage in air/water or even when on fire.

Thermal-healing of lattice defects for high-energy single-crystalline battery cathodes

Single-crystalline nickel-rich cathodes are a rising candidate with great potential for high-energy lithium-ion batteries due to their superior structural and chemical robustness in comparison with polycrystalline counterparts. Within the single-crystalline cathode materials, the lattice strain and defects have significant impacts on the intercalation chemistry and, therefore, play a key role in determining the macroscopic electrochemical performance. Guided by our predictive theoretical model, we have systematically evaluated the effectiveness of regaining lost capacity by modulating the lattice deformation via an energy-efficient thermal treatment at different chemical states. We demonstrate that the lattice structure recoverability is highly dependent on both the cathode composition and the state of charge, providing clues to relieving the fatigued cathode crystal for sustainable lithium-ion batteries.

The lattice strain and defects in layered oxides is critical to the intercalation chemistry and battery performance. Here, the authors demonstrate a thermal-healing of lattice defects in single-crystalline cathodes caused by the thermal-induced release of lattice strain and the structure ordering.

Multiscale Understanding of Surface Structural Effects on High-Temperature Operational Resiliency of Layered Oxide Cathodes

The worldwide energy demand in electric vehicles and the increasing global temperature have called for development of high-energy and long-life lithium-ion batteries (LIBs) with improved high-temperature operational resiliency. However, current attention has been mostly focused on cycling aging at elevated temperature, leaving considerable gaps of knowledge in the failure mechanism, and practical control of abusive calendar aging and thermal runaway that are highly related to the eventual operational lifetime and safety performance of LIBs. Herein, using a combination of various in situ synchrotron X-ray and electron microscopy techniques, a multiscale understanding of surface structure effects involved in regulating the high-temperature operational tolerance of polycrystalline Ni-rich layered cathodes is reported. The results collectively show that an ultraconformal poly(3,4-ethylenedioxythiophene) coating can effectively prevent a LiNi_0.8 Co_0.1 Mn_0.1 O₂ cathode from undergoing undesired phase transformation and transition metal dissolution on the surface, atomic displacement, and dislocations within primary particles, intergranular cracking along the grain boundaries within secondary particles, and intensive bulk oxygen release during high state-of-charge and high-temperature aging. The present work highlights the essential role of surface structure controls in overcoming the multiscale degradation pathways of high-energy battery materials at extreme temperature.

Mitigating the Kinetic Hindrance of Single-Crystalline Ni-Rich Cathode via Surface Gradient Penetration of Tantalum

Single-crystalline Ni-rich cathodes are promising candidates for the next-generation high-energy Li-ion batteries. However, they still suffer from poor rate capability and low specific capacity due to the severe kinetic hindrance at the nondilute state during Li⁺ intercalation. Herein, combining experiments with density functional theory (DFT) calculations, we demonstrate that this obstacle can be tackled by regulating the oxidation state of nickel via injecting high-valence foreign Ta⁵⁺ . The as-obtained single-crystalline LiNi_0.8 Co_0.1 Mn_0.1 O₂ delivers a high specific capacity (211.2 mAh g^-1 at 0.1 C), high initial Coulombic efficiency (93.8 %), excellent rate capability (157 mAh g^-1 at 4 C), and good durability (90.4 % after 100 cycles under 0.5 C). This work provides a strategy to mitigate the Li⁺ kinetic hindrance of the appealing single-crystalline Ni-rich cathodes and will inspire peers to conduct an intensive study.

Multifunctionality of cerium decoration in enhancing the cycling stability and rate capability of a nickel-rich layered oxide cathode

The structural collapse and surface chemical degradation of nickel-rich layered oxide cathodes (NCM) of lithium-ion batteries during operation, which result in severe capacity attenuation, are the major challenges that hinder their commercial development. To improve the cycle and rate performances of LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811), in this study, we have constructed a double-shell structure protective layer with a surface CeO_2-x coating and interfacial spinel-like phase, which mitigate particle microcrack formation and isolate the NCM811 particles from electrolyte erosion. Additionally, during heat-treatment calcination, tetravalent cerium ions with strong oxidation ability can be partially doped into the material, which causes partial oxidation of Ni²⁺ to Ni³⁺, thereby reducing the Li⁺/Ni²⁺ mixing. The strong Ce-O bonds formed in the lattice help to improve the stability of the structure in the highly de-lithiated state. Thus, the synergy of multifunctional cerium modification effectively improves the structural stability and electrochemical kinetics of the material during cycling. Impressively, the obtained Ce-NCM811 exhibits capacity retention of 80.3% at a high discharge rate of 8 C after 500 cycles, which is much higher than that of the pristine cathode (only 44.3%). This work successfully designed a material with multi-functional Ce modification to provide a basis for Ni-rich cathode materials, which is crucial as it effectively improves the electrochemical performance.

Elucidating the Effect of the Dopant Ionic Radius on the Structure and Electrochemical Performance of Ni-Rich Layered Oxides for Lithium-Ion Batteries

The merits of Ni-rich layered oxide cathodes in specific capacity and material cost accelerate their practical applications in electric vehicles and grid energy storage. However, detrimental structural deterioration occurs inevitably during long-term cycling, leading to potential instability and capacity decay of the cathodes. In this work, we investigate the effect of the doped cation radius on the electrochemical performance and structural stability of Ni-rich cathode materials by doping with Mg and Ca ions in LiNi_0.8Co_0.1Mn_0.1O₂. The results reveal that an increase in the doping ion radius can enlarge the interlayer spacing but lead to the collapse of the layered structure if the ion radius is too large, which undermines the cycling stability of the cathode material. Compared with the Ca-doped sample and the pristine material, Mg-doped LiNi_0.8Co_0.1Mn_0.1O₂ presents improved structural stability and superior thermal stability due to the pillar and glue roles of medium-sized Mg ions in the lithium layer. The results of this study suggest that a suitable ionic radius of the dopant is critical for stabilizing the structure and improving the electrochemical properties of Ni-rich layered oxide cathode materials.

Highly efficient selective recovery of lithium from spent lithium-ion batteries by thermal reduction with cheap ammonia reagent

The rapid development of new energy technology leads to explosive growth of lithium-ion batteries (LIBs) industry which greatly alleviates the problems of environmental pollution and energy shortage. However, how to realize resource circulation of critical metals including lithium (Li) and cobalt (Co) becomes the new problem of LIBs industry. This paper proposes an improved thermal reduction technology to efficiently recycle Li and Co from spent LIBs, where cheap urea is applied as the only additive to provide ammonia (NH₃). By thermal reduction, LiCoO₂ was thermally reduced into water-soluble lithium carbonate and water-insoluble cobalt metal Under the optimal conditions, 99.96% Li with nearly 100% selectivity was obtained by water leaching. More importantly, the concept of "oxygen elements removal (OER)" was proposed to explain the metal extraction from spent LIBs, which could help to describe the reaction mechanism as O-cage digestion mechanism. Furthermore, metal extraction from spent LIBs was re-understood as "seeking an applicable reductant", which provided a fresh perspective for understanding Li selective recovery. These concepts and findings can provide some inspiration for metal recovery from spent LIBs.

Heterogeneous Degradation in Thick Nickel-Rich Cathodes During High-Temperature Storage and Mitigation of Thermal Instability by Regulating Cationic Disordering

The thermal instability is a major problem in high-energy nickel-rich layered cathode materials for large-scale battery application. Due to the scarce investigation of thick electrodes at the practical full-cell level, the understanding of thermal failure mechanism is still insufficient. Herein, an intrinsic origin of thermal instability in fully charged industrial pouch cells during high-temperature storage is discovered. Through the investigation from crystals to particles, and from electrodes to cells, it is shown that serious top-down heterogeneous degradation occurs along the depth direction of the thick electrode, including phase transition, cationic disordering, intergranular/intragranular cracks, and side reactions. Such degradation originates from the abundant oxygen vacancies and reduced catalytic Ni²⁺ at cathode surface, causing microstructural defects and directly leading to the thermal instability. Nonmagnetic elements doping and surface modification are suggested to be effective in mitigating the thermal instability through modulating cationic disordering.

Surface enrichment and diffusion enabling gradient-doping and coating of Ni-rich cathode toward Li-ion batteries

Critical barriers to layered Ni-rich cathode commercialisation include their rapid capacity fading and thermal runaway from crystal disintegration and their interfacial instability. Structure combines surface modification is the ultimate choice to overcome these. Here, a synchronous gradient Al-doped and LiAlO₂-coated LiNi_0.9Co_0.1O₂ cathode is designed and prepared by using an oxalate-assisted deposition and subsequent thermally driven diffusion method. Theoretical calculations, in situ X-ray diffraction results and finite-element simulation verify that Al³⁺ moves to the tetrahedral interstices prior to Ni²⁺ that eliminates the Li/Ni disorder and internal structure stress. The Li⁺-conductive LiAlO₂ skin prevents electrolyte penetration of the boundaries and reduces side reactions. These help the Ni-rich cathode maintain a 97.4% cycle performance after 100 cycles, and a rapid charging ability of 127.7 mAh g⁻¹ at 20 C. A 3.5-Ah pouch cell with the cathode and graphite anode showed more than a 500-long cycle life with only a 5.6% capacity loss.

The commercialisation of promising Ni-rich cathodes is limited by capacity fading and thermal runaway. Here, the authors design a gradient Al-doped and LiAlO₂-coated LiNi_0.9Co_0.1O₂ cathode, which addresses the crystal degradation and interfacial instability and thus improves the cycle and thermal stabilities.

In situ observation of thermal-driven degradation and safety concerns of lithiated graphite anode

Graphite, a robust host for reversible lithium storage, enabled the first commercially viable lithium-ion batteries. However, the thermal degradation pathway and the safety hazards of lithiated graphite remain elusive. Here, solid-electrolyte interphase (SEI) decomposition, lithium leaching, and gas release of the lithiated graphite anode during heating were examined by in situ synchrotron X-ray techniques and in situ mass spectroscopy. The source of flammable gas such as H₂ was identified and quantitively analyzed. Also, the existence of highly reactive residual lithium on the graphite surface was identified at high temperatures. Our results emphasized the critical role of the SEI in anode thermal stability and uncovered the potential safety hazards of the flammable gases and leached lithium. The anode thermal degradation mechanism revealed in the present work will stimulate more efforts in the rational design of anodes to enable safe energy storage.

The role of the lithiated graphite anode in battery thermal runaway failure remains under intense investigation. In this work, with multiple in situ synchrotron X-ray characterizations, the phase evolution, gas release, and lithium leaching of lithiated graphite anode are illustrated in detail.

Insight into the Redox Reaction Heterogeneity within Secondary Particles of Nickel-Rich Layered Cathode Materials

Nickel-rich LiNi_xCo_yMn_1-x-yO₂ (nickel-rich NCM, 0.6 ≤ x < 1) cathode materials suffer from multiscale reaction heterogeneity within the electrode during the electrochemical energy storage process. However, owing to the lack of appropriate diagnostic tools, the systematic understanding and observation on the redox reaction heterogeneity at the individual secondary-particle level is still limited. Raman spectroscopy can not only reflect the depth of the redox reaction through probing the vibrational information on the metal-oxygen coordination structure but also sensitively detect the local structure changes of different regions within the secondary particle with suitable spatial resolution. Therefore, Raman spectroscopy is applied here to conveniently conduct the high-resolution and in-depth analysis of the rate-dependent reaction heterogeneity within nickel-rich NCM secondary particles. It is found that, under high-rate conditions, the oxidation/reduction reaction mainly occurs in the surface region of the particles and the cause of this particle-scale reaction heterogeneity is the limitation of the slow solid-phase Li⁺ diffusion and the transient charging/discharging processes. In addition, this reaction heterogeneity would aggravate the structural instability of the material continuously during the charging/discharging cycles, thus resulting in a slowdown in the kinetics of Li⁺ de/intercalation and the apparent capacity decay. This work can not only provide fundamental insight into the rational modification of high-power nickel-rich NCM materials but also guide the setting of electrochemical operating conditions for high-power lithium-ion batteries (LIBs).

Oncological Ligand-Target Binding Systems and Developmental Approaches for Cancer Theranostics

Targeted treatment of cancer hinges on the identification of specific intracellular molecular receptors on cancer cells to stimulate apoptosis for eventually inhibiting growth; the development of novel ligands to target biomarkers expressed by the cancer cells; and the creation of novel multifunctional carrier systems for targeted delivery of anticancer drugs to specific malignant sites. There are numerous receptors, antigens, and biomarkers that have been discovered as oncological targets (oncotargets) for cancer diagnosis and treatment applications. Oncotargets are critically important to navigate active anticancer drug ingredients to specific disease sites with no/minimal effect on surrounding normal cells. In silico techniques relating to genomics, proteomics, and bioinformatics have catalyzed the discovery of oncotargets for various cancer types. Effective oncotargeting requires high-affinity probes engineered for specific binding of receptors associated with the malignancy. Computational methods such as structural modeling and molecular dynamic (MD) simulations offer opportunities to structurally design novel ligands and optimize binding affinity for specific oncotargets. This article proposes a streamlined approach for the development of ligand-oncotarget bioaffinity systems via integrated structural modeling and MD simulations, making use of proteomics, genomic, and X-ray crystallographic resources, to support targeted diagnosis and treatment of cancers and tumors.