Increasing Iridium Oxide Activity for the Oxygen Evolution Reaction with Hafnium Modification

Insulator-Transition-Induced Degradation of Pyrochlore Ruthenates in Electrocatalytic Oxygen Evolution and Stabilization through Doping

Ru-based pyrochlores (e.g., Y2Ru2O7-δ) are promised to replace IrO2 in polymer electrolyte membrane (PEM) electrolyzers. It is significant to reveal the cliff attenuation on the oxygen evolution reaction (OER) performance of these pyrochlores. In this work, we monitor the structure changes and electrochemical behavior of Y2Ru2O7-δ over the OER process, and it is found that the reason of decisive OER inactivation is derived from an insulator transition occurred within Y2Ru2O7-δ due to its inner "perfecting" lattice induced by continuous atom rearrangement. Therefore, a stabilization strategy of the Ir-substituted Y2Ru2O7-δ is proposed to alleviate this undesirable behavior. The double-exchange interaction between Ru and Ir in [RuO6] and [IrO6] octahedra leads the charge redistribution with simultaneous spin configuration adjustment. The electronic state in newly formed octahedrons centered with Ru 4d3 (with the state of eg'↑↑a1g ↑ eg 0) and Ir 5d6 (eg'↑↓↑↓a1g ↑↓ eg 0) relieves the uneven electron distributions in [RuO6] orbital. The attenuated Jahn-Teller effect alleviates atom rearrangement, represented as the mitigation of insulator transition, surface reconstruction, and metal dissolution. As results, the Ir-substituted Y2Ru2O7-δ presents the greatly improved OER stability and PEM durability. This study unveils the OER degradation mechanism and stabilization strategy for material design of Ru-based OER catalysts for electrochemical applications.

Research Progress in Structure Evolution and Durability Modulation of Ir- and Ru-Based OER Catalysts under Acidic Conditions

Green hydrogen energy, as one of the most promising energy carriers, plays a crucial role in addressing energy and environmental issues. Oxygen evolution reaction catalysts, as the key to water electrolysis hydrogen production technology, have been subject to durability constraints, preventing large-scale commercial development. Under the high current density and harsh acid-base electrolyte conditions of the water electrolysis reaction, the active metals in the catalysts are easily converted into high-valent soluble species to dissolve, leading to poor structural durability of the catalysts. There is an urgent need to overcome the durability challenges under acidic conditions and develop electrocatalysts with both high catalytic activity and high durability. In this review, the latest research results are analyzed in depth from both thermodynamic and kinetic perspectives. First, a comprehensive summary of the structural deactivation state process of noble metal oxide catalysts is presented. Second, the evolution of the structure of catalysts possessing high durability is discussed. Finally, four new strategies for the preparation of stable catalysts, "electron buffer (ECB) strategy", combination strength control, strain control, and surface coating, are summarized. The challenges and prospects are also elaborated for the future synthesis of more effective Ru/Ir-based catalysts and boost their future application.

Advances in Noble Metal Electrocatalysts for Acidic Oxygen Evolution Reaction: Construction of Under-Coordinated Active Sites

Renewable energy-driven proton exchange membrane water electrolyzer (PEMWE) attracts widespread attention as a zero-emission and sustainable technology. Oxygen evolution reaction (OER) catalysts with sluggish OER kinetics and rapid deactivation are major obstacles to the widespread commercialization of PEMWE. To date, although various advanced electrocatalysts have been reported to enhance acidic OER performance, Ru/Ir-based nanomaterials remain the most promising catalysts for PEMWE applications. Therefore, there is an urgent need to develop efficient, stable, and cost-effective Ru/Ir catalysts. Since the structure-performance relationship is one of the most important tools for studying the reaction mechanism and constructing the optimal catalytic system. In this review, the recent research progress from the construction of unsaturated sites to gain a deeper understanding of the reaction and deactivation mechanism of catalysts is summarized. First, a general understanding of OER reaction mechanism, catalyst dissolution mechanism, and active site structure is provided. Then, advances in the design and synthesis of advanced acidic OER catalysts are reviewed in terms of the classification of unsaturated active site design, i.e., alloy, core-shell, single-atom, and framework structures. Finally, challenges and perspectives are presented for the future development of OER catalysts and renewable energy technologies for hydrogen production.

Grain Boundary Defect Engineering in Rutile Iridium Oxide Boosts Efficient and Stable Acidic Water Oxidation

Proton exchange membrane water electrolysis (PEMWE) is considered a promising technology for coupling with renewable energy sources to achieve clean hydrogen production. However, constrained by the sluggish kinetics of the anodic oxygen evolution reaction (OER) and the acidic abominable environment render the grand challenges in developing the active and stable OER electrocatalyst, leading to low efficiency of PEMWE. Herein, we develop the rutile-type IrO2 nanoparticles with abundant grain boundaries and the continuous nanostructure through the joule heating and sacrificial template method. The optimal candidate (350-IrO2) demonstrates remarkable electrocatalytic activity and stability during the OER, presenting a promising advancement for efficient PEMWE. DFT calculations verified that grain boundaries can modulate the electronic structure of Ir sites and optimize the adsorption of oxygen intermediates, resulting in the accelerated kinetics. 350-IrO2 affords a rapid OER process with 20 times higher mass activity (0.61 A mgIr -1) than the commercial IrO2 at 1.50 V vs. RHE. Benefiting from the reduced overpotential and the preservation of the stable rutile structure, 350-IrO2 exhibits the stability of 200 h test at 10 mA cm-2 with only trace decay of 11.8 mV. Moreover, the assembled PEMWE with anode 350-IrO2 catalyst outputs the current density up to 2 A cm-2 with only 1.84 V applied voltage, long-term operation for 100 h without obvious performance degradation at 1 A cm-2.

KIr4O8 Nanowires with Rich Hydroxyl Promote Oxygen Evolution Reaction in Proton Exchange Membrane Water Electrolyzer

The sluggish kinetics for anodic oxygen evolution reaction (OER) and insufficient catalytic performance over the corresponding Ir-based catalysts are still enormous challenges in proton exchange membrane water electrolyzer (PEMWE). Herein, it is reported that KIr4O8 nanowires anode catalyst with more exposed active sites and rich hydroxyl achieves a current density of 1.0 A cm-2 at 1.68 V and possesses excellent catalytic stability with 1230 h in PEMWE. Combining in situ Raman spectroscopy and differential electrochemical mass spectroscopy results, the modified adsorbate evolution mechanism is proposed, wherein the rich hydroxyl in the inherent structure of KIr4O8 nanowires directly participates in the catalytic process for favoring the OER. Density functional theory calculation results further suggest that the enhanced proximity between Ir (d) and O (p) band center in KIr4O8 can strengthen the covalence of Ir-O, facilitate the electron transfer between adsorbents and active sites, and decrease the energy barrier of rate-determining step from OH* to O* during the OER.

Atomically thin iridium nanosheets for oxygen evolution electrocatalysis

2D nanostructures of noble metals hold great potential for developing efficient electrocatalysts due to their high atom efficiency associated with their large specific surface area and abundant active sites. Here, we introduce a one-pot solvothermal synthesis method that can enable the fabrication of freestanding atomically thin Ir nanosheets. The thermal decomposition of a complex of Ir and a long-chain amine, which could readily be formed with the assistance of a strong base, under CO flow conditions successfully yielded Ir nanosheets consisting of 2-4 atomic layers. The prepared Ir nanosheets showed prominent activity and stability toward oxygen evolution electrocatalysis in acidic conditions, which can be attributed to their ultrathin 2D structure.

Beyond the ordinary: exploring the synergistic effect of iodine and nickel doping in cobalt hydroxide for superior energy storage applications

This study explores the iodine and nickel-doped cobalt hydroxide (I & Ni-co-doped-Co(OH)2) as a potential material for energy storage and conversion applications owing to its excellent electrochemical characteristics. According to our analysis, it was revealed that this material exhibits pseudocapacitive-like behavior, as evident from distinct redox peaks observed in cyclic voltammetry, which confirms its ability to store charges. The diffusion coefficient analysis reveals that this material possesses conductivity and rapid diffusion kinetics, making it particularly advantageous compared to materials synthesized in previous studies. Charge-discharge measurements were performed to analyze the charge storage capacity and stability of this material after 3000 consecutive cycles, showing its excellent stability with minimum loss of capacitance. Furthermore, its anodic and cathodic linear sweep voltammetry curves were measured to evaluate its oxygen evolution and hydrogen evolution reaction performance. The results showed that the material exhibited an excellent water splitting performance, which suggests its potential practical application for hydrogen production. This increased activity was attributed to the doping of α-Co(OH)2, which improved its structural stability, electrical conductivity, and charge transfer efficiency. Thus, I & Ni-co-doped-Co(OH)2 possesses enhanced properties that make it an excellent material for both energy storage and hydrogen generation applications.

Research Advances of Non-Noble Metal Catalysts for Oxygen Evolution Reaction in Acid

Water splitting is an important way to obtain hydrogen applied in clean energy, which mainly consists of two half-reactions: hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). However, the kinetics of the OER of water splitting, which occurs at the anode, is slow and inefficient, especially in acid. Currently, the main OER catalysts are still based on noble metals, such as Ir and Ru, which are the main active components. Hence, the exploration of new OER catalysts with low cost, high activity, and stability has become a key issue in the research of electrolytic water hydrogen production technology. In this paper, the reaction mechanism of OER in acid was discussed and summarized, and the main methods to improve the activity and stability of non-noble metal OER catalysts were summarized and categorized. Finally, the future prospects of OER catalysts in acid were made to provide a little reference idea for the development of advanced OER catalysts in acid in the future.

Sr-Stabilized IrMnO2 Solid Solution Nano-Electrocatalysts with Superior Activity and Excellent Durability for Oxygen Evolution Reaction in Acid Media

The development of cost-effective catalysts for oxygen evolution reaction (OER) in acidic media is of paramount importance. This work reports that Sr-doped solid solution structural ultrafine IrMnO2 nanoparticles (NPs) (≈1.56 nm) on the carbon nanotubes (Sr-IrMnO2 /CNTs) are efficient catalysts for the acidic OER. Even with the Ir use dosage 3.5 times lower than that of the commercial IrO2 , the Sr-IrMnO2 /CNTs only need an overpotential of 236.0 mV to drive 10.0 mA cm-2 and show outstanding stability for >400.0 h. Its Ir mass activity is 39.6 times higher than that of the IrO2 at 1.53 V. The solid solution and Sr-doping structure of Sr-IrMnO2 are the main origin of the high catalytic activity and excellent stability of the Sr-IrMnO2 /CNTs. The density function theory calculations indicate that the solid solution structure can promote strong electronic coupling between Ir and Mn, lowering the energy barrier of the OER rate-determining step. The Sr-doping can enhance the stability of Ir against the chemical corrosion and demetallation. Water electrolyzers and proton exchange membrane water electrolyzers assembled with the Sr-IrMnO2 /CNTs show superb performance and excellent durability in the acid media.

Structural Evolution of Ultrathin SrFeO3-δ Films during Oxygen Evolution Reaction Revealed by In Situ Electrochemical Stress Measurements

We report the electrochemical stress analysis of SrFeO3-δ (SFO) films deposited on Au substrates during oxygen evolution reactions (OERs). Our in situ analysis of Au reveals conversion reactions from Au to Au(OH)3, AuOOH, and AuOx during the OER. Au reactions cause a monotonic compressive stress on surfaces assigned to the formation of Au hydroxides and oxides. Electrochemical stress analysis of SrFeO3-δ/Au shows a dramatically different behavior during the OER, which we attribute to structural evolutions and conversion reactions, such as the conversion of SFO to iron (oxy)hydroxides. Interestingly, electrochemical stress analysis of SrFeO3-δ/Au shows a tensile trend, which evolves with cycling history. Electrochemical stress analysis of SFO films before the onset of the OER shows in situ changes, which cause tensile stresses when cycling to 1.2 V. We attribute these stresses to the formation of Fe2+δOδ(OH)2-δ (0 ≤ δ ≤ 1.5)-type materials where δ approaches 1.5 at higher potentials. At potentials higher than 1.2 V and during OER, surface stress response is rather stable, which we assign to the full conversion of SFO to iron (oxy)hydroxides. This analysis provides insight into the reaction mechanism and details of in situ structural changes of iron perovskites during the OER in alkaline environments.

Defective blue titanium oxide induces high valence of NiFe-(oxy)hydroxides over heterogeneous interfaces towards high OER catalytic activity

Nickel-iron (oxy)hydroxides (NiFeOxHy) have been validated to speed up sluggish kinetics of the oxygen evolution reaction (OER) but still lack satisfactory substrates to support them. Here, non-stoichiometric blue titanium oxide (B-TiOx) was directly derived from Ti metal by alkaline anodization and used as a substrate for electrodeposition of amorphous NiFeOxHy (NiFe/B-TiOx). The performed X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculations evidenced that there is a charge transfer between B-TiOx and NiFeOxHy, which gives rise to an elevated valence at the Ni sites (average oxidation state ∼ 2.37). The synthesized NiFe/B-TiOx delivers a current density of 10 mA cm-2 and 100 mA cm-2 at an overpotential of 227 mV and 268 mV, respectively, which are better than that of pure Ti and stainless steel. It also shows outstanding activity and stability under industrial conditions of 6 M KOH. The post-OER characterization studies revealed that the surface morphology and valence states have no significant change after 24 h of operation at 500 mA cm-2, and also can effectively inhibit the leaching of Fe. We illustrate that surface modification of Ti which has high corrosion resistance and mechanical strength, to generate strong interactions with NiFeOxHy is a simple and effective strategy to improve the OER activity and stability of non-precious metal electrodes.

Valence Oscillation of Ru Active Sites for Efficient and Robust Acidic Water Oxidation

The continuous oxidation and leachability of active sites in Ru-based catalysts hinder practical application in proton-exchange membrane water electrolyzers (PEMWE). Herein, robust inter-doped tungsten-ruthenium oxide heterostructures [(Ru-W)Ox ] fabricated by sequential rapid oxidation and metal thermomigration processes are proposed to enhance the activity and stability of acidic oxygen evolution reaction (OER). The introduction of high-valent W species induces the valence oscillation of the Ru sites during OER, facilitating the cyclic transition of the active metal oxidation states and maintaining the continuous operation of the active sites. The preferential oxidation of W species and electronic gain of Ru sites in the inter-doped heterostructure significantly stabilize RuOx on WOx substrates beyond the Pourbaix stability limit of bare RuO2 . Furthermore, the asymmetric Ru-O-W active units are generated around the heterostructure interface to adsorb the oxygen intermediates synergistically, enhancing the intrinsic OER activity. Consequently, the inter-doped (Ru-W)Ox heterostructures not only demonstrate an overpotential of 170 mV at 10 mA cm-2 and excellent stability of 300 h in acidic electrolytes but also exhibit the potential for practical applications, as evidenced by the stable operation at 0.5 A cm-2 for 300 h in PEMWE.

Synergistic effects of nitrogen-doped carbon and praseodymium oxide in electrochemical water splitting

Hybrid materials featuring perovskite-type metal oxide in conjunction with heteroatom-doped graphene hold immense promise as alternatives to costly noble metal catalysts for electrochemical water splitting, facilitating the generation of environmentally friendly hydrogen. In this study, perovskite-type oxide containing praseodymium, barium, strontium, cobalt, and iron atoms dispersed in a carbon matrix as a catalyst is synthesized via annealing of the carbon material with substrates for the preparation of perovskite oxide. The mass ratio of reagents regulates the porous structure and elemental composition. The result of the hydrogen evolution reaction (HER), suggests that the hybrid catalysts exhibit intermediate HER kinetics compared to the commercial Pt/C and the catalyst without carbon. The Tafel slope for HER is lower for materials containing carbon, because of the improved reaction kinetics, facilitated proton transfer, and enhanced electrochemical surface area. Therefore, the study provides an effective strategy for the preparation of catalyst and their use as the active catalyst of water splitting.

Ir-Sn pair-site triggers key oxygen radical intermediate for efficient acidic water oxidation

The anode corrosion induced by the harsh acidic and oxidative environment greatly restricts the lifespan of catalysts. Here, we propose an antioxidation strategy to mitigate Ir dissolution by triggering strong electronic interaction via elaborately constructing a heterostructured Ir-Sn pair-site catalyst. The formation of Ir-Sn dual-site at the heterointerface and the resulting strong electronic interactions considerably reduce d-band holes of Ir species during both the synthesis and the oxygen evolution reaction processes and suppress their overoxidation, enabling the catalyst with substantially boosted corrosion resistance. Consequently, the optimized catalyst exhibits a high mass activity of 4.4 A mgIr-1 at an overpotential of 320 mV and outstanding long-term stability. A proton-exchange-membrane water electrolyzer using this catalyst delivers a current density of 2 A cm-2 at 1.711 V and low degradation in an accelerated aging test. Theoretical calculations unravel that the oxygen radicals induced by the π* interaction between Ir 5d-O 2p might be responsible for the boosted activity and durability.

Loading IrOx Clusters on MnO2 Boosts Acidic Water Oxidation via Metal-Support Interaction

Noble metal-based electrocatalysts are crucial for efficient acidic water oxidation to develop green hydrogen energy. However, traditional noble metal catalysts loaded on inactive substrates show limited intrinsic catalytic activity, and their large sizes have compromised the atom efficiency of these noble metals. Herein, IrOx nanoclusters with sizes below 2 nm, displaying high atom-utilization efficiency of Ir species, were supported on a redox-active MnO2 nanosubstrate (IrOx/MnO2) with different phases (α-MnO2, δ-MnO2, and ε-MnO2) to explore the optimal combination. Electrochemical measurements showed that IrOx/ε-MnO2 had excellent OER performance with a low overpotential of 225 mV at 10 mA cm-2 in 0.5 M H2SO4, superior to its counterpart, IrOx/α-MnO2 (242 mV) and IrOx/δ-MnO2 (286 mV). Moreover, it also delivered robust stability with no obvious change in operating potential at 10 mA cm-2 during 50 h of continuous operation. Combining the XPS results and Bader charge analysis, we demonstrated that the strong metal-support interactions of IrOx/ε-MnO2 could effectively regulate the electronic structures of the active Ir atoms and stabilize IrOx nanoclusters on supports to suppress their detachment, resulting in significantly enhanced catalytic activity and stability for acidic OER. DFT calculations further supported that the enhanced catalytic OER performance of IrOx/ε-MnO2 could be ascribed to the appropriate strength of interactions between the active Ir sites and the reaction intermediates of the potential-determining step (*O and *OOH) regulated by the redox-active substrates.

Structurally-Distorted RuIr-Based Nanoframes for Long-Duration Oxygen Evolution Catalysis

Oxygen evolution reaction (OER) plays a key role in proton exchange membrane water electrolysis (PEMWE), yet the electrocatalysts still suffer from the disadvantages of low activity and poor stability in acidic conditions. Here, a new class of CdRu2 IrOx nanoframes with distorted structure for acidic OER is successfully fabricated. Impressively, CdRu2 IrOx displays an ultralow overpotential of 189 mV and an ultralong stability of 1500 h at 10 mA cm⁻2 toward OER in 0.5 M H2 SO4 . Moreover, a PEMWE using the distorted CdRu2 IrOx can be steadily operated at 0.1 A cm⁻2 for 90 h. Microstructural analyses and X-ray absorption spectroscopy (XAS) demonstrate that the synergy between Ru and Ir in CdRu2 IrOx induces the distortion of Ru-O, Ir-O, and Ru-M (M = Ru, Ir) bonds. In situ XAS indicates that the applied potential leads to the deformation octahedral structure of RuOx /IrOx and the formation of stable Ru5+ species for OER. Theoretical calculations also reveal that the distorted structures can reduce the energy barrier of rate-limiting step during OER. This work provides an efficient strategy for constructing structural distortion to achieve significant enhancement on the activity and stability of OER catalysts.

Acid-Base Chemistry of a Model IrO2 Catalytic Interface

Iridium oxide (IrO2) is one of the most efficient catalytic materials for the oxygen evolution reaction (OER), yet the atomic scale structure of its aqueous interface is largely unknown. Herein, the hydration structure, proton transfer mechanisms, and acid-base properties of the rutile IrO2(110)-water interface are investigated using ab initio based deep neural-network potentials and enhanced sampling simulations. The proton affinities of the different surface sites are characterized by calculating their acid dissociation constants, which yield a point of zero charge in agreement with experiments. A large fraction (≈80%) of adsorbed water dissociation is observed, together with a short lifetime (≈0.5 ns) of the resulting terminal hydroxy groups, due to rapid proton exchanges between adsorbed H2O and adjacent OH species. This rapid surface proton transfer supports the suggestion that the rate-determining step in the OER may not involve proton transfer across the double layer into solution, as indicated by recent experiments.

Reconstructed Ir‒O‒Mo species with strong Brønsted acidity for acidic water oxidation

Surface reconstruction generates real active species in electrochemical conditions; rational regulating reconstruction in a targeted manner is the key for constructing highly active catalyst. Herein, we use the high-valence Mo modulated orthorhombic Pr₃Ir_1-xMo_xO₇ as model to activate lattice oxygen and cations, achieving directional and accelerated surface reconstruction to produce self-terminated Ir‒O_bri‒Mo (O_bri represents the bridge oxygen) active species that is highly active for acidic water oxidation. The doped Mo not only contributes to accelerated surface reconstruction due to optimized Ir‒O covalency and more prone dissolution of Pr, but also affords the improved durability resulted from Mo-buffered charge compensation, thereby preventing fierce Ir dissolution and excessive lattice oxygen loss. As such, Ir‒O_bri‒Mo species could be directionally generated, in which the strong Brønsted acidity of O_bri induced by remaining Mo assists with the facilitated deprotonation of oxo intermediates, following bridging-oxygen-assisted deprotonation pathway. Consequently, the optimal catalyst exhibits the best activity with an overpotential of 259 mV to reach 10 mA cm_geo^-2, 50 mV lower than undoped counterpart, and shows improved stability for over 200 h. This work provides a strategy of directional surface reconstruction to constructing strong Brønsted acid sites in IrO_x species, demonstrating the perspective of targeted electrocatalyst fabrication under in situ realistic reaction conditions.

Dynamic orbital hybridization triggered spin-disorder renormalization via super-exchange interaction for oxygen evolution reaction

The oxygen evolution reaction (OER) underpins many aspects of energy storage and conversion in modern industry and technology, but which still be suffering from the dilemma of sluggish reaction kinetics and poor electrochemical performance. Different from the viewpoint of nanostructuring, this work focuses on an intriguing dynamic orbital hybridization approach to renormalize the disordering spin configuration in porous noble-metal-free metal-organic frameworks (MOFs) to accelerate the spin-dependent reaction kinetics in OER. Herein, we propose an extraordinary super-exchange interaction to reconfigure the domain direction of spin nets at porous MOFs through temporarily bonding with dynamic magnetic ions in electrolytes under alternating electromagnetic field stimulation, in which the spin renormalization from disordering low-spin state to high-spin state facilitates rapid water dissociation and optimal carrier migration, leading to a spin-dependent reaction pathway. Therefore, the spin-renormalized MOFs demonstrate a mass activity of 2,095.1 A gmetal-1 at an overpotential of 0.33 V, which is about 5.9 time of pristine ones. Our findings provide a insight into reconfiguring spin-related catalysts with ordering domain directions to accelerate the oxygen reaction kinetics.

In Situ Activation Endows Orthorhombic Fluorite-Type Samarium Iridium Oxide with Enhanced Acidic Water Oxidation

Developing electrochemical catalysts for acidic water oxidation with improved activity and stability has been the key to the further popularization of proton exchange membrane electrolyzers. In this work, an orthorhombic fluorite-type samarium iridium oxide (Sm3IrO7) catalyst is synthesized by a simple solid-state reaction. After in situ activation, the as-prepared Sm3IrO7 exhibits higher mass activity and durability than that of commercial IrO2. The in-depth analyses indicate the formation of amorphous IrOx species on the surface to evolve to a new heterostructure IrOx/Sm3IrO7, along with Sm leaching during the in situ activation process. More importantly, strong electronic interactions exist between newborn IrOx species and remaining Sm3IrO7, leading to the compressed Ir-O bonds in IrOx compared to commercial IrO2, thus reducing the energy barrier for oxygen evolution reaction (OER) intermediates to improve the OER process. Based on the above-mentioned analyses, it is speculated that the actual active species for enhanced acidic water oxidation should be IrOx/Sm3IrO7, rather than Sm3IrO7 itself. Theoretical calculations confirm that the optimal energy level path of IrOx/Sm3IrO7 follows the lattice oxygen mechanism, and the energy level of surface Ir 5d orbitals is lower than O 2p orbitals in IrOx/Sm3IrO7, enabling it a superior OER activity.

Remarkably Enhanced Lattice Oxygen Participation in Perovskites to Boost Oxygen Evolution Reaction

Enhancing the participation of the lattice oxygen mechanism (LOM) in several perovskites to significantly boost the oxygen evolution reaction (OER) is daunting. With the rapid decline in fossil fuels, energy research is turning toward water splitting to produce usable hydrogen by significantly reducing overpotential for other half-cells' OER. Recent studies have shown that in addition to the conventional adsorbate evolution mechanism (AEM), participation of LOM can overcome their prevalent scaling relationship limitations. Here, we report the acid treatment strategy and bypass the cation/anion doping strategy to significantly enhance LOM participation. Our perovskite demonstrated a current density of 10 mA cm^-2 at an overpotential of 380 mV and a low Tafel slope (65 mV dec^-1) much lower than IrO₂ (73 mV dec^-1). We propose that the presence of nitric acid-induced defects regulates the electronic structure and thereby lowers oxygen binding energy, allowing enhanced LOM participation to boost OER significantly.

Customized reaction route for ruthenium oxide towards stabilized water oxidation in high-performance PEM electrolyzers

The poor stability of Ru-based acidic oxygen evolution (OER) electrocatalysts has greatly hampered their application in polymer electrolyte membrane electrolyzers (PEMWEs). Traditional understanding of performance degradation centered on influence of bias fails in describing the stability trend, calling for deep dive into the essential origin of inactivation. Here we uncover the decisive role of reaction route (including catalytic mechanism and intermediates binding strength) on operational stability of Ru-based catalysts. Using MRuO_x (M = Ce⁴⁺, Sn⁴⁺, Ru⁴⁺, Cr⁴⁺) solid solution as structure model, we find the reaction route, thereby stability, can be customized by controlling the Ru charge. The screened SnRuO_x thus exhibits orders of magnitude lifespan extension. A scalable PEMWE single cell using SnRuO_x anode conveys an ever-smallest degradation rate of 53 μV h^-1 during a 1300 h operation at 1 A cm^-2.

Dynamic rhenium dopant boosts ruthenium oxide for durable oxygen evolution

Heteroatom-doping is a practical means to boost RuO₂ for acidic oxygen evolution reaction (OER). However, a major drawback is conventional dopants have static electron redistribution. Here, we report that Re dopants in Re_0.06Ru_0.94O₂ undergo a dynamic electron accepting-donating that adaptively boosts activity and stability, which is different from conventional dopants with static dopant electron redistribution. We show Re dopants during OER, (1) accept electrons at the on-site potential to activate Ru site, and (2) donate electrons back at large overpotential and prevent Ru dissolution. We confirm via in situ characterizations and first-principle computation that the dynamic electron-interaction between Re and Ru facilitates the adsorbate evolution mechanism and lowers adsorption energies for oxygen intermediates to boost activity and stability of Re_0.06Ru_0.94O₂. We demonstrate a high mass activity of 500 A g_cata.^-1 (7811 A g_Re-Ru^-1) and a high stability number of S-number = 4.0 × 10⁶ n_oxygen n_Ru^-1 to outperform most electrocatalysts. We conclude that dynamic dopants can be used to boost activity and stability of active sites and therefore guide the design of adaptive electrocatalysts for clean energy conversions.

Enhanced Acidic Water Oxidation by Dynamic Migration of Oxygen Species at the Ir/Nb2 O5-x Catalyst/Support Interfaces

Catalyst/support interaction plays a vital role in catalysis towards acidic oxygen evolution (OER), and the performance reinforcement is currently interpreted by either strain or electron donation effect. We herein report that these views are insufficient, where the dynamic evolution of the interface under potential bias must be considered. Taking Nb₂ O_5-x supported iridium (Ir/Nb₂ O_5-x ) as a model catalyst, we uncovered the dynamic migration of oxygen species between IrO_x and Nb₂ O_5-x during OER. Direct spectroscopic evidence combined with theoretical computation suggests these migrations not only regulate the in situ Ir structure towards boosted activity, but also suppress its over-oxidation via spontaneously delivering excessive oxygen from IrO_x to Nb₂ O_5-x . The optimized Ir/Nb₂ O_5-x thus demonstrated exceptional performance in scalable water electrolyzers, i.e., only need 1.839 V to attain 3 A cm^-2 (surpassing the DOE 2025 target), and no activity decay during a 2000 h test at 2 A cm^-2 .

Progress of Heterogeneous Iridium-Based Water Oxidation Catalysts

The water oxidation reaction (or oxygen evolution reaction, OER) plays a critical role in green hydrogen production via water splitting, electrochemical CO₂ reduction, and nitrogen fixation. The four-electron and four-proton transfer OER process involves multiple reaction intermediates and elementary steps that lead to sluggish kinetics; therefore, a high overpotential is necessary to drive the reaction. Among the different water-splitting electrolyzers, the proton exchange membrane type electrolyzer has greater advantages, but its anode catalysts are limited to iridium-based materials. The iridium catalyst has been extensively studied in recent years due to its balanced activity and stability for acidic OER, and many exciting signs of progress have been made. In this review, the surface and bulk Pourbaix diagrams of iridium species in an aqueous solution are introduced. The iridium-based catalysts, including metallic or oxides, amorphous or crystalline, single crystals, atomically dispersed or nanostructured, and iridium compounds for OER, are then elaborated. The latest progress of active sites, reaction intermediates, reaction kinetics, and elementary steps is summarized. Finally, future research directions regarding iridium catalysts for acidic OER are discussed.

Green synthesis of water splitting electrocatalysts: IrO2 nanocages via Pearson's chemistry

Highly porous iridium oxide structures are particularly well-suited for the preparation of porous catalyst layers needed in proton exchange membrane water electrolyzers. Herein, we report the formation of iridium oxide nanostructured cages, via a water-based process performed at room temperature, using cheap Cu2O cubes as the template. In this synthetic approach, based on Pearson's hard and soft acid-base theory, the replacement of the Cu2O core by an iridium shell is permitted by the difference in hardness/softness of cations and anions of the two reactants Cu2O and IrCl3. Calcination followed by acid leaching allow the removal of residual copper oxide cores and leave IrO2 hierarchical porous structures with outstanding activity toward the oxygen evolution reaction. Fundamental understanding of the reaction steps and identification of the intermediates are permitted by coupling a set of ex situ and in situ techniques including operando time-resolved X-ray absorption spectroscopy during the synthesis.

Multistage Electron Distribution Engineering of Iridium Oxide by Codoping W and Sn for Enhanced Acidic Water Oxidation Electrocatalysis

Developing efficient and robust anodic electrocatalysts to implement the proton-exchange membrane (PEM) electrolyzer is critical for hydrogen generation. Nevertheless, the only known applicable anode catalyst IrO_x in PEM electrolyzers still requires high overpotential due to the weak binding energy between oxygen intermediates and active sites, limiting its wide applications. Herein, a ternary Ir_0.7 W_0.2 Sn_0.1 O_x nanocatalyst synthesized through a sol-gel strategy, exhibits a low overpotential of 236 mV (10 mA cm^-2 _geo ) for thoxygen evolution reaction (OER), accompanied with robust durability over 220 h at 1 A cm^-2 _geo in 0.5 m H₂ SO₄ . Moreover, the optimized Ir_0.7 W_0.2 Sn_0.1 O_x delivers a prominent mass activity of 722.7 A g^-1 _Ir at 1.53 V (vs RHE), which is around 34 times higher compared with that of IrO_x . The mircrostructural analyses reveal that codoping of W and Sn stabilizes Ir with a valence state lower than 4+ through multistage charge redistribution, avoiding the overoxidation of Ir above 1.6 V versus RHE and enhancing the acidic OER performance. Additionally, density functional theory calculations reveal that codoping of W and Sn moves the d band center of Ir to the Fermi level, thus enhancing the binding energies of oxygen intermediates with Ir sites and decreasing the energy barrier toward acidic OER.

Iridium Doped Pyrochlore Ruthenates for Efficient and Durable Electrocatalytic Oxygen Evolution in Acidic Media

Developing highly active, durable, and cost-effective electrocatalysts for the oxygen evolution reaction (OER) is of prime importance in proton exchange membrane (PEM) water electrolysis techniques. Ru-based catalysts have high activities but always suffer from severe fading and dissolution issues, which cannot satisfy the stability demand of PEM. Herein, a series of iridium-doped yttrium ruthenates pyrochlore catalysts is developed, which exhibit better activity and much higher durability than commercial RuO₂ , IrO₂ , and most of the reported Ru or Ir-based OER electrocatalysts. Typically, the representative Y₂ Ru_1.2 Ir_0.8 O₇ OER catalyst demands a low overpotential of 220 mV to achieve 10 mA cm^-2 , which is much lower than that of RuO₂ (300 mV) and IrO₂ (350 mV). In addition, the catalyst does not show obvious performance decay or structural degradation over a 2000 h stability test. EXAFS and XPS co-prove the reduced valence state of ruthenium and iridium in pyrochlore contributes to the improved activity and stability. Density functional theory reveals that the potential-determining steps barrier of OOH* formation is greatly depressed through the synergy effect of Ir and Ru sites by balancing the d band center and oxygen intermediates binding ability.

Regulating Sn self-doping and boosting solar water splitting performance of hematite nanorod arrays grown on fluorine-doped tin oxide via low-level Hf doping

Hematite (α-Fe₂O₃) nanorod arrays grown on fluorine-doped tin oxide (FTO) substrate exhibit outstanding solar water splitting efficiency, benefiting from Sn self-doping induced by high-temperature annealing. However, this Sn self-doping couldn't be freely controlled without changing the optimized annealing conditions, which limits the further improvement of their photoelectrochemical (PEC) properties. Here, we report a facile hydrothermal synthesis with subsequent annealing approach to regulate the Sn diffusion via hafnium (Hf) doping as well as enhance the PEC performance of hematite photoanode. Upon increasing the Hf doping concentration, the Sn self-doping content was continuously suppressed. The very low doping-level of Hf (i.e., atomic Hf/Fe = 0.13 ∼ 1.54%) was sufficient for enhancing the electrical conductivity. The Hf-doped α-Fe₂O₃ with the optimized dopant concentration (Hf/Fe = 1.34%, denoted as 0.25-Hf-Fe₂O₃) showed a photocurrent density of 1.79 mA/cm² at 1.23 V vs. RHE, 70% higher than that of the Sn self-doped one (Pristine-Fe₂O₃). The donor density of 0.25-Hf-Fe₂O₃ increased 2.5 times compared to Pristine-Fe₂O₃ while its space-charge resistance and charge transfer resistance declined by 40% and 22%, respectively, verifying Hf doping improves the charge carrier density and accelerates the charge transfer for solar water oxidation. We offered here a prospective dopant alternative for preparing superior hematite-based photoanode.