Complex Liquid Crystal Emulsions for Biosensing

Controllable enzymatic hydrolysis in reverse Janus emulsion microreactors

HYPOTHESIS

The key feature of living cells is multicompartmentalization for enzymatic reactions. Artificial cell-like multicompartments with micro domains are appealing to mimic the biological counterparts. In addition, establishing a sustainable, efficient, and controllable reaction system for enzymatic hydrolysis is imperative for the production of natural fatty acids from animal and plant-based fats.

EXPERIMENTS

Reverse Janus emulsion microreactors, i.e. (W1 + W2)/O, is constructed through directly using natural fats as continuous phase and aqueous two-phase solutions (ATPS) as inner phases. Enzyme is confined in the compartmented aqueous droplets dominated by the salt of Na2SO4 and polyethylene glycol (PEG). Enzyme catalyzed ester hydrolysis employed as a model reaction is performed under the conditions of agitation-free and mild temperature. Regulation of reaction kinetics is investigated by diverse droplet topology, composition of inner ATPS, and on-demand emulsification.

FINDINGS

Excellent enzymatic activity toward hydrolysis of plant and animal oils achieves 88.5 % conversion after 3 h. Compartmented micro domains contribute to condense and organize the enzymes spatially. Timely removal of the products away from reaction sites of oil/water interface "pushed" the reaction forward. Distribution and transfer of enzyme in two aqueous lobes provide extra freedom in the regulation of hydrolysis kinetics, with equilibrium conversion controlled freely from 14.5 % to 88.5 %. Reversible "open" and "shut" of hydrolysis is acheived by on-demand emulsification and spontaneous demulsification. This paper paves the way to advancing progress in compartmentalized emulsion as a sustainable and high-efficiency platform for biocatalytic applications.

Water in liquid crystal emulsion-based sensing platform for colorimetric detection of organophosphorus pesticide

Development of a simple and convenient method for the rapid detection of organophosphorus pesticides (OPs) is particular important for the safety of environmental water and agriculture products. In this work, the water/liquid crystal (W/LC) emulsion is obtained via dispersing an aqueous solution of sodium dodecyl sulfate (SDS) and peroxidase from horseradish (HRP) into a water-immiscible nematic LC and employed as a sensing platform for the detection of dichlorvos (2, 2-dichlorovinyl dimethyl phosphate, DDVP) that is a typical OP with acute toxicity. Remarkably, the stepwise release of the encapsulated cargo HRP from the W/LC emulsion can be triggered upon the addition of the cationic surfactant myristoylcholine chloride (Myr) due to the strong interfacial charge interactions with the anionic surfactant SDS. The released HRP induces an obvious color change of the overlaying bulk aqueous solution via the H2O2-HRP-TMB reaction system. As Myr can be enzymatically cleaved by AChE, the detection of AChE is fulfilled successfully. This approach is also employed to detect DDVP that can irreversibly inhibit the activity of AChE. This assay shows a linear response between the absorbance of the oxidized TMB solution and the DDVP concentration in the range of 0.001-10 μg/mL (R2 = 0.99). The limit of detection (LOD) and the limit of quantity (LOQ) of DDVP are determined to be 1.9 ng/mL and 6.3 ng/mL, respectively. In addition, this strategy also demonstrates excellent performance for the DDVP detection in real samples, the detection recovery rate of DDVP in water samples (lake water and tap water) and vegetables (tomatoes and cole) by this method is 88.0 % ∼112.6 %, the relative standard deviation (RSD) ≤ 7.5 %. These results suggest the W/LC emulsion-based sensing platform shows great potential for visual detection of DDVP in real samples. In conclusion, the proposed approach is scalable for practical application in food safety as well as environmental monitoring fields, and will provide promising solutions for the assay of pesticide residues.

Exploiting Molecular Orders at the Interface of Microdroplets for Intelligent Materials

ConspectusThe intrinsic molecular order of liquid crystals (LCs) and liquid crystalline elastomers (LCEs) is the origin of their stimuli-responsive properties. The programmable responsiveness and functionality, such as shape morphing and color change under external stimuli, are the key features that attract interest in designing LC- and LCE-based intelligent material platforms. Methods such as mechanical stretching and shearing, surface alignment, and field-assisted alignment have been exploited to program the order of LC molecules for the desired responsiveness. However, the huge size mismatch between the nanometer-sized LC mesogens and the targeted macroscopic objects calls for questions about how to delicately control molecular order for desired performance. Microparticles that can be synthesized with intrinsic molecular order precisely controlled to micrometer size can be used as building blocks for bulk materials, thus offering opportunities to bridge the gap and transcend molecular orders across scales. By taking advantage of the interfacial anchoring effects, we can control and engineer the molecular orders inside the microdroplets, allowing for the realization of various responsive behaviors. Furthermore, designer LC microparticles with multiple responsiveness can be assembled and confined within a matrix, opening a new pathway to engineering LC-enabled intelligent materials.In this Account, we present our recent work on exploiting the molecular order inside microdroplets for the construction of intelligent materials. We briefly introduce the typical chemicals used in the synthesis and the methods developed to control LC molecular alignment within a microdroplets. We then present examples of microparticles synthesized from microdroplets that can transform into complex morphologies upon cooling from the isotropic to nematic phase or due to phase separation within the droplets coupled with the segregation of LC oligomers (LCOs) with polydisperse chain lengths. Furthermore, we show the synthesis of elliptical LCE microparticles and exploit their thermal and magnetic responsiveness to program shape-morphing behaviors and microarrays with switchable optical polarization. By mixing magnetic nanoparticles in cholesteric liquid crystals (CLCs) and silicone oils, we created Janus microparticles capable of color switching for camouflage and information encryption. Moreover, we can engineer complex molecular orders in LCE microparticles by mixing different surfactants, yielding microparticles of diverse anisotropic, temperature-responsive shapes after photopolymerization and extraction of the template LC molecules with different solvents. We conclude the Account with an outlook on the design of intelligent material systems via the design of unprecedented molecular ordering within the microparticles and their coupling with bulk materials.

Complex-Shape Solid-State Photonic Droplets Prepared via Phase Separation and Microfluidics

Complex-shape solid-state cholesteric liquid crystal (CLCsolid) droplets were prepared via solvent removal, phase separation, and photopolymerization of uniformly sized reactive CLC (rCLC)/fluorocarbon oil (FCO)/dichloromethane (solvent) droplets produced via a microfluidic method. The interfacial energies between rCLC and FCO, rCLC and water, and FCO and water of a rCLC/FCO droplet in an aqueous solution were precisely controlled through the specified surfactants. The shape of the rCLC/FCO droplet was strongly dependent on the balances among these interfacial energies, enabling the preparation of complex-shape droplets through the controlled concentration of the used surfactants. The complex-shape rCLC/FCO droplets showed photonic patterns consisting of a central reflection from a convex surface, cross-communication from a convex surface between adjacent particles, a photonic reflection band from the outer upward-facing concave surface, and total internal reflection from the inner upward-facing surface. Complex-shape CLCsolid particles obtained after photopolymerization and extraction of a nonreactive chiral dopant and FCO showed photonic patterns similar to those before photopolymerization without much deterioration of the photonic structure. These complex patterns make CLCsolid and rCLC/FCO droplets promising anticounterfeiting materials.

Liquid foams as sensors for the detection of biomarkers

Bioassays are widely used in healthcare to detect and quantify biomarkers, such as molecules or enzymes, which are crucial in monitoring diseases and health conditions. In developed countries, healthcare professionals use specialized reagents and equipment's to perform these bioassays. However, in less-industrialized countries, the creation of low cost, fast, and technically simple bioassays is required. Herein, we propose a simple approach for detecting biochemical markers using host-guest complexes containing a surfactant. When the biochemical marker is present, the host-guest complex is disrupted, releasing the surfactant and producing foam. The read-out mechanism relies on the change of foam volume as function of biomarker concentration. This change is quantifiable by the naked eye and can be measured with a simple ruler. We claim that the use of foams as sensing tool is an attractive, inexpensive, fast, and easy to handle on-site detection method.

In situ Tracking of Exoenzyme Activity Using Droplet Luminescence Concentrators for Ratiometric Detection of Bacteria

We demonstrate a novel, rapid, and cost-effective biosensing paradigm that is based on an in situ visualization of bacterial exoenzyme activity using biphasic Janus emulsion droplets. Sensitization of the droplets toward dominant extracellular enzymes of bacterial pathogens is realized via selective functionalization of one hemisphere of Janus droplets with enzyme-cleavable surfactants. Surfactant cleavage results in an interfacial tension increase at the respective droplet interface, which readily transduces into a microscopically detectable change of the internal droplet morphologies. A macroscopic fluorescence read-out of such morphological transitions is obtained via ratiometrically recording the angle-dependent anisotropic emission signatures of perylene-containing droplets from two different angles. The optical read-out method facilitates detection of marginal morphological responses of polydisperse droplet samples that can be easily produced in any environment. The performance of Janus droplets as powerful optical transducers and signal amplifiers is highlighted by rapid (<4 h) and cost-effective antibody and DNA-free identification of three major foodborne pathogens, with detection thresholds of below 10 CFU mL-1 for Salmonella and <102 to 103 CFU mL-1 for Listeria and Escherichia coli.

Innovative Real-Time Flow Sensor Using Detergent-Free Complex Emulsions with Dual-Emissive Semi-Perfluoroalkyl Substituted Α-Cyanostilbene

In this study, the potential of complex emulsions is investigated as transducers in sensing applications. Complex emulsions are stabilized without external detergents by developing a novel α-cyanostilbene substituted with PEG and semi-perfluoroalkyl chain (CNFCPEG). CNFCPEG exhibits unique variable emission properties depending on its aggregation state, allowing dual blue and green emissions in complex emulsions with hydrocarbon-in-fluorocarbon-in-water (H/F/W) morphology. The green excimer emissions result from the self-assembly of CNFCPEG at the fluorocarbon/water interface, while the blue emission observed is due to aggregation in the organic phase. A novel flow-injection method is developed by incorporating complex emulsions with CNFCPEG into multiple-well flow chips (MWFC). Iodine is successfully detected in a mobile aqueous solution by monitoring morphology changes. The findings demonstrate that self-stabilized complex emulsions with MWFC hold great promise for real-time sensing without costly instruments.

Tunable Structural Coloration in Eccentric Water-in-Oil-in-Water Droplets

Structural colors show diverse advantages such as fade resistance, eco-friendliness, iridescence, and high saturation in comparison with chemical pigments. In this paper, we show tunable structural coloration in colorless water-in-oil-in-water double emulsion droplets via total internal reflection and interference at the microscale concave interfaces. Through experimental work and simulations, we demonstrate that the shell thickness and the eccentricity of the core-shell structures are key to the successful formation of iridescent structural colors. Only eccentric thin-shell water-in-oil-in-water droplets show structural colors. Importantly, structural colors based on water-oil interfaces are readily responsive to a variety of environmental stimuli, such as osmotic pressure, temperature, magnetic fields, and light composition. This work highlights an alternative structural coloration that expands the applications of droplet-based structural colors to aqueous systems.

Liquid Crystal Emulsions: A Versatile Platform for Photonics, Sensing, and Active Matter

The self-assembly of liquid crystals (LCs) is a fascinating method for controlling the organization of discrete molecules into nanostructured functional materials. Although LCs are traditionally processed in thin films, their confinement within micrometre-sized droplets has recently revealed new properties and functions, paving the way for next-generation soft responsive materials. These recent findings have unlocked a wealth of unprecedented applications in photonics (e.g. reflectors, lasing materials), sensing (e.g. biomolecule and pathogen detection), soft robotics (e.g. micropumps, artificial muscles), and beyond. This Minireview focuses on recent developments in LC emulsion designs and highlights a variety of novel potential applications. Perspectives on the opportunities and new directions for implementing LC emulsions in future innovative technologies are also provided.

Liquid Crystal Materials for Biomedical Applications

Liquid crystal is a state of matter being intermediate between solid and liquid. Liquid crystal materials exhibit both orientational order and fluidity. While liquid crystals have long been highly recognized in the display industry, in recent decades, liquid crystals provide new opportunities into the cross-field of material science and biomedicine due to their biocompatibility, multifunctionality, and responsiveness. In this review, the latest achievements of liquid crystal materials applied in biomedical fields are summarized. The start is made by introducing the basic concepts of liquid crystals, and then shifting to the components of liquid crystals as well as functional materials derived therefrom. After that, the ongoing and foreseeable applications of liquid crystal materials in the biomedical field with emphasis put on several cutting-edge aspects, including drug delivery, bioimaging, tissue engineering, implantable devices, biosensing, and wearable devices are discussed. It is hoped that this review will stimulate ingenious ideas for the future generation of liquid crystal-based drug development, artificial implants, disease diagnosis, health status monitoring, and beyond.

Multicompartment colloid systems with lipid and polymer membranes for biomedical applications

Multicompartment structures have the potential for biomedical applications because they can act as multifunctional systems and provide simultaneous delivery of drugs and diagnostics agents of different types. Moreover, some of them mimic biological cells to some extent with organelles as separate sub-compartments. This article analyses multicompartment colloidal structures with smaller sub-units covered with lipid or polymer membranes that provide additional protection for the encapsulated substances. Vesosomes with small vesicles encapsulated in the inner pools of larger liposomes are the most studied systems to date. Dendrimer molecules are enclosed by a lipid bilayer shell in dendrosomes. Capsosomes, polymersomes-in-polymer capsules, and cubosomes-in-polymer capsules are composed of sub-compartments encapsulated within closed multilayer polymer membranes. Janus or Cerberus emulsions contain droplets composed of two or three phases: immiscible oils in O/W emulsions and aqueous polymer or salt solutions that are separated into two or three phases and form connected droplets in W/O emulsions. In more cases, the external surface of engulfed droplets in Janus or Cerberus emulsions is covered with a lipid or polymer monolayer. eLiposomes with emulsion droplets encapsulated into a bilayer shell have been given little attention so far, but they have very great prospects. In addition to nanoemulsion droplets, solid lipid nanoparticles, nanostructured lipid carriers and inorganic nanoparticles can be loaded into eLiposomes. Molecular engineering of the external membrane allows the creation of ligand-targeted and stimuli-responsive multifunctional systems. As a result, the efficacy of drug delivery can be significantly enhanced.

Responsive Janus droplets as modular sensory layers for the optical detection of bacteria

The field of biosensor development is fueled by innovations in new functional transduction materials and technologies. Material innovations promise to extend current sensor hardware limitations, reduce analysis costs, and ensure broad application of sensor methods. Optical sensors are particularly attractive because they enable sensitive and noninvasive analyte detection in near real-time. Optical transducers convert physical, chemical, or biological events into detectable changes in fluorescence, refractive index, or spectroscopic shifts. Thus, in addition to sophisticated biochemical selector designs, smart transducers can improve signal transmission and amplification, thereby greatly facilitating the practical applicability of biosensors, which, to date, is often hampered by complications such as difficult replication of reproducible selector-analyte interactions within a uniform and consistent sensing area. In this context, stimuli-responsive and optically active Janus emulsions, which are dispersions of kinetically stabilized biphasic fluid droplets, have emerged as a novel triggerable material platform that provides as a versatile and cost-effective alternative for the generation of reproducible, highly sensitive, and modular optical sensing layers. The intrinsic and unprecedented chemical-morphological-optical coupling inside Janus droplets has facilitated optical signal transduction and amplification in various chemo- and biosensor paradigms, which include examples for the rapid and cost-effective detection of major foodborne pathogens. These initial demonstrations resulted in detection limits that rival the capabilities of current commercial platforms. This trend article aims to present a conceptual summary of these initial efforts and to provide a concise and comprehensive overview of the pivotal kinetic and thermodynamic principles that govern the ability of Janus droplets to sensitively and selectively respond to and interact with bacteria.

Ultra-stable liquid crystal droplets coated by sustainable plant-based materials for optical sensing of chemical and biological analytes

Herein, we demonstrate for the first time the synthesis of ultra-stable, spherical, nematic liquid crystal (LC) droplets of narrow size polydispersity coated by sustainable, biodegradable, plant-based materials that trigger a typical bipolar-to-radial configurational transition in dynamic response to chemical and biological analytes. Specifically, a highly soluble polymer, potato protein (PoP) and a physically-crosslinked potato protein microgel (PoPM) of ∼100 nm in diameter, prepared from the PoP, a byproduct of the starch industry, were compared for their ability to coat LC droplets. Although both PoP and PoPM were capable of reducing the interfacial tension between water and n-tetradecane <30 mN m^-1, PoPM-coated LC droplets showed better stability than the PoP-coated droplets via a Pickering-like mechanism. Strikingly, the Pickering LC droplets outperformed PoP-stabilized droplets in terms of dynamic response with 5× lower detection limit to model chemical analytes (sodium dodecyl sulphate, SDS) due to the difference in SDS-binding features between the protein and the microgel. To eliminate the effect of size polydispersity on the response, monodisperse Pickering LC droplets of diameter ∼16 μm were additionally obtained using microfluidics, which mirrored the response to chemical as well as biological analytes, i.e., primary bile acid, an important biomarker of liver diseases. We demonstrate that these eco-friendly microgels used for creating monodisperse, ultra-stable, LC complex colloids are powerful templates for fabricating next generation, sustainable optical sensors for early diagnosis in clinical settings and other sensing applications.

Smartphone-based hand-held polarized light microscope for on-site pharmaceutical crystallinity characterization

Polarized light microscopy (PLM) is a common but critical method for pharmaceutical crystallinity characterization, which has been widely introduced for research purposes or drug testing and is recommended by many pharmacopeias around the world. To date, crystallinity characterization of pharmaceutical solids is restricted to laboratories due to the relatively bulky design of the conventional PLM system, while little attention has been paid to on-site, portable, and low-cost applications. Herein, we developed a smartphone-based polarized microscope with an ultra-miniaturization design ("hand-held" scale) for these purposes. The compact system consists of an optical lens, two polarizers, and a tailor-made platform to hold the smartphone. Analytical performance parameters including resolution, imaging quality of interference color, and imaging reproducibility were measured. In a first approach, we illustrated the suitability of the device for pharmaceutical crystallinity characterization and obtained high-quality birefringence images comparable to a conventional PLM system, and we also showed the great promise of the device for on-site characterization with high flexibility. In a second approach, we employed the device as a proof of concept for a wider application ranging from liquid crystal to environmental pollutants or tissues from plants. As such, this smartphone-based hand-held polarized light microscope shows great potential in helping pharmacists both for research purposes and on-site drug testing, not to mention its broad application prospects in many other fields.

Optical Fingerprinting of Dynamic Interfacial Reaction Pathways Using Liquid Crystals

Reactions at interfaces between fluid phases are widely used to synthesize small molecules, polymers, and nanoparticles. In situ monitoring of the underlying dynamic reaction pathways remains challenging. Liquid crystals (LCs) have been used to detect simple chemical transformations at interfaces in situations where interface-bound reactants and products trigger distinct equilibrium orientations of LCs. However, whether or not LCs can be used to report complex reaction pathways via nonequilibrium states generated by reactions has not been explored. Here we explore this question using S_N2' nucleophilic substitution reactions that involve a synthetic amphiphile and a series of amine-based nucleophiles with one to four reaction sites. Although all reactants and products generate the same equilibrium LC orientation, we find that each nucleophile defines a distinct set of possible reaction pathways with a characteristic spatial and temporal LC optical response unique to the nucleophile. Additional experiments reveal that the nonequilibrium orientational states of the LCs arise from a combination of dynamic interfacial processes that include adsorption/desorption of reactants, the presence of reaction intermediates on the LC interface, and the generation of interfacial tension gradients (Marangoni stresses). Overall, our results reveal that the spatiotemporal optical outputs of LCs ("optical fingerprints") can be a rich source of information regarding interfacial reactions.

Janus Microdroplets with Tunable Self-Recoverable and Switchable Reflective Structural Colors

Microdroplets made from chiral liquid crystals (CLCs) can display reflective structural colors. However, the small area of reflection and their isotropic shape limit their performance. Here, Janus microdroplets are synthesized through phase separation between CLCs and silicone oil. The as-synthesized Janus microdroplets show primary structural colors with ≈14 times larger area compared to their spherical counterparts at a specific orientation; the orientation and thus the colored/transparent states can be switched by applying a magnetic field. The color of the Janus microdroplets can be tuned ranging from red to violet by varying the concentration of the chiral dopant in the CLC phase. Due to the density difference between the two phases, the Janus microdroplets prefer to orientate the silicone oil side up vertically, enabling the self-recoverable structural color after distortion. The Janus microdroplets can be dispersed in aqueous media to track the configuration and speed of magnetic objects. They can also be patterned as multiplexed labels for data encryption. The magnetic field-responsive Janus CLC microdroplets presented here offer new insights to generate and switch reflective colors with high color saturation. It also paves the way for broader applications of CLCs, including anti-counterfeiting, data encryption, display, and untethered speed sensors.

Morphology-Dependent Aggregation-Induced Emission of Janus Emulsion Surfactants

We report a novel stimuli-responsive fluorescent material platform that relies on an evocation of aggregation-induced emission (AIE) from tetraphenylethylene (TPE)-based surfactants localized at one hemisphere of biphasic micro-scale Janus emulsion droplets. Dynamic alterations in the available interfacial area were evoked through surfactant-induced dynamic changes of the internal droplet morphology that can be modulated as a function of the balance of interfacial tensions of the droplet constituent phases. Thus, by analogy with a Langmuir-Blodgett trough that enables selective concentration of surfactants at a liquid-gas interface, we demonstrate here a method for controllable modulation of the available interfacial area of surfactant-functionalized liquid-liquid interfaces. We show that a morphology-dependent alteration of the interfacial area can be used to evoke an optical signal, by selectively assembling synthesized TPE-based surfactants on the respective droplet interfaces. A trigger-induced increase in the concentration of TPE-based surfactants at the liquid-liquid interfaces results in an evocation of aggregation-induced emission (AIE), inducing an up to 3.9-fold increase in the measured emission intensity of the droplets.

Liquid Crystal Droplet-Based Biosensors: Promising for Point-of-Care Testing

The development of biosensing platforms has been impressively accelerated by advancements in liquid crystal (LC) technology. High response rate, easy operation, and good stability of the LC droplet-based biosensors are all benefits of the long-range order of LC molecules. Bioprobes emerged when LC droplets were combined with biotechnology, and these bioprobes are used extensively for disease diagnosis, food safety, and environmental monitoring. The LC droplet biosensors have high sensitivity and excellent selectivity, making them an attractive tool for the label-free, economical, and real-time detection of different targets. Portable devices work well as the accessory kits for LC droplet-based biosensors to make them easier to use by anyone for on-site monitoring of targets. Herein, we offer a review of the latest developments in the design of LC droplet-based biosensors for qualitative target monitoring and quantitative target analysis.

Ordering Transitions of Liquid Crystals Triggered by Metal Oxide-catalyzed Reactions of Sulfur Oxide Species

Liquid crystals (LCs), when supported on reactive surfaces, undergo changes in ordering that can propagate over distances of micrometers, thus providing a general and facile mechanism to amplify atomic-scale transformations on surfaces into the optical scale. While reactions on organic and metal substrates have been coupled to LC-ordering transitions, metal oxide substrates, which offer unique catalytic activities for reactions involving atmospherically important chemical species such as oxidized sulfur species, have not been explored. Here, we investigate this opportunity by designing LCs that contain 4'-cyanobiphenyl-4-carboxylic acid (CBCA) and respond to surface reactions triggered by parts-per-billion concentrations of SO₂ gas on anatase (101) substrates. We used electronic structure calculations to predict that the carboxylic acid group of CBCA binds strongly to anatase (101) in a perpendicular orientation, a prediction that we validated in experiments in which CBCA (0.005 mol %) was doped into an LC (4'-n-pentyl-4-biphenylcarbonitrile). Both experiment and computational modeling further demonstrated that SO₃-like species, produced by a surface-catalyzed reaction of SO₂ with H₂O on anatase (101), displace CBCA from the anatase surface, resulting in an orientational transition of the LC. Experiments also reveal the LC response to be highly selective to SO₂ over other atmospheric chemical species (including H₂O, NH₃, H₂S, and NO₂), in agreement with our computational predictions for anatase (101) surfaces. Overall, we establish that the catalytic activities of metal oxide surfaces offer the basis of a new class of substrates that trigger LCs to undergo ordering transitions in response to chemical species of relevance to atmospheric chemistry.

Design of a Super-Liquid Crystal-Phobic Coating for Immobilizing Liquid Crystal μ-Droplets─Without Affecting Their Sensitivity

The aqueous interface of nematic liquid crystal (LC) that undergoes a triggered change in ordering transition of mesogens under an appropriate stimulus has emerged as an important tool for various relevant applications. Further, the confinement of LC into a micrometer dimension appeared to be a facile approach for improving their relevant features and performance. However, the optical characterization of ordering transition in a single micrometer-sized, bare, and free-floating LC droplet in the aqueous phase is an extremely challenging task due to unavoidable Brownian motion, which limits its scope for practical applications. Here, we exploited the 1,4-conjugate addition reaction to report a multilayer coating of a reactive nanocomplex that displayed an extreme repellence to beaded LC droplets with tailored adhesive force through the association of adequate orthogonal chemical modifications with glucamine and selected alkyl acrylates. Further, a spatially selective underwater adhesive super-LC-phobic pattern on a hydrophobic background was developed for immobilizing bare and micrometer-sized LC droplets from their aqueous dispersion without having any arbitrary spillage of the aqueous medium. The settled micrometer-sized LC droplets remained efficient for the triggered change in ordering transition from bipolar (having boojum defects at poles) to radial (with a single defect in the center) configuration. Eventually, a simple and fundamentally distinct chemical strategy of immobilizing a soft and functional material by associating bio-inspired wettability allowed to demonstrate the repetitive triggered LC ordering transition in a single and bare LC droplet.

Chiral nematic liquid crystal droplets as a basis for sensor systems

For a series of phospholipid coated calamitic nematic liquid crystal droplets (5CB, 6CB, 7CB, E7 and MLC7023) of diameter ∼18 μm, the addition of chiral dopant leaves the sign of surface anchoring unchanged. Herein we report that for these chiral nematic droplets an analyte induced transition from a Frank-Pryce structure (with planar anchoring) to a nested-cup structure (with perpendicular anchoring) is accompanied by changes in the intensity of reflected light. We propose this system as both a general scheme for understanding director fields in chiral nematic liquid crystal droplets with perpendicular anchoring and as an ideal candidate to be utilised as the basis for developing cheap, single use LC-based sensor devices.

Advanced Functional Liquid Crystals

Liquid crystals have been intensively studied as functional materials. Recently, integration of various disciplines has led to new directions in the design of functional liquid-crystalline materials in the fields of energy, water, photonics, actuation, sensing, and biotechnology. Here, recent advances in functional liquid crystals based on polymers, supramolecular complexes, gels, colloids, and inorganic-based hybrids are reviewed, from design strategies to functionalization of these materials and interfaces. New insights into liquid crystals provided by significant progress in advanced measurements and computational simulations, which enhance new design and functionalization of liquid-crystalline materials, are also discussed.

Detection of PFAS and Fluorinated Surfactants Using Differential Behaviors at Interfaces of Complex Droplets

Contamination of per- and polyfluoroalkyl substances (PFAS) in water supplies will continue to have serious health and environmental consequences. Despite the importance of monitoring the concentrations of PFAS at potential sites of contamination and at treatment plants, there are few suitable and rapid on-site methods. Many nonconventional techniques do not possess the necessary selectivity and sensitivity to distinguish PFAS from other surface-active components and to quantify the low concentrations in real-world conditions. Herein, we report a novel and rapid method for the detection of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) by leveraging their differential behaviors at the interfaces of emissive complex droplets. Measurement of surface and interfacial tensions via a force tensiometer reveals that PFAS preferentially self-assemble at the water-fluorocarbon oil interface (F/W) rather than the water-hydrocarbon oil interface (H/W). We also observe an opposite behavior for hydrocarbon surfactants. This difference in interfacial behavior produces distinct effects on the morphological change and optical emission of biphasic oil-in-water droplets. The change in the intensity of fluorescence emission, measured with a simple spectroscopic setup, correlates with the concentrations of PFAS. We also demonstrate that the range of detection and sensitivity can be tuned by adjusting the initial composition of the complex droplets. Our results illustrate an alternative mode of sensors that may provide a rapid and on-site detection of PFAS.

Chiral Liquid Crystal Microdroplets for Sensing Phospholipid Amphiphiles

Designing simple, sensitive, fast, and inexpensive readout devices to detect biological molecules and biomarkers is crucial for early diagnosis and treatments. Here, we have studied the interaction of the chiral liquid crystal (CLC) and biomolecules at the liquid crystal (LC)-droplet interface. CLC droplets with high and low chirality were prepared using a microfluidic device. We explored the reconfiguration of the CLC molecules confined in droplets in the presence of 1,2-diauroyl-sn-glycero3-phosphatidylcholine (DLPC) phospholipid. Cross-polarized optical microscopy and spectrometry techniques were employed to monitor the effect of droplet size and DLPC concentration on the structural reorganization of the CLC molecules. Our results showed that in the presence of DLPC, the chiral LC droplets transition from planar to homeotropic ordering through a multistage molecular reorientation. However, this reconfiguration process in the low-chirality droplets happened three times faster than in high-chirality ones. Applying spectrometry and image analysis, we found that the change in the chiral droplets’ Bragg reflection can be correlated with the CLC–DLPC interactions.

Overview of Liquid Crystal Biosensors: From Basic Theory to Advanced Applications

Liquid crystals (LCs), as the remarkable optical materials possessing stimuli-responsive property and optical modulation property simultaneously, have been utilized to fabricate a wide variety of optical devices. Integrating the LCs and receptors together, LC biosensors aimed at detecting various biomolecules have been extensively explored. Compared with the traditional biosensing technologies, the LC biosensors are simple, visualized, and efficient. Owning to the irreplaceable superiorities, the research enthusiasm for the LC biosensors is rapidly rising. As a result, it is necessary to overview the development of the LC biosensors to guide future work. This article reviews the basic theory and advanced applications of LC biosensors. We first discuss different mesophases and geometries employed to fabricate LC biosensors, after which we introduce various detecting mechanisms involved in biomolecular detection. We then focus on diverse detection targets such as proteins, enzymes, nucleic acids, glucose, cholesterol, bile acids, and lipopolysaccharides. For each of these targets, the development history and state-of-the-art work are exhibited in detail. Finally, the current challenges and potential development directions of the LC biosensors are introduced briefly.

Liquid Crystals: Versatile Self-Organized Smart Soft Materials

Smart soft materials are envisioned to be the building blocks of the next generation of advanced devices and digitally augmented technologies. In this context, liquid crystals (LCs) owing to their responsive and adaptive attributes could serve as promising smart soft materials. LCs played a critical role in revolutionizing the information display industry in the 20th century. However, in the turn of the 21st century, numerous beyond-display applications of LCs have been demonstrated, which elegantly exploit their controllable stimuli-responsive and adaptive characteristics. For these applications, new LC materials have been rationally designed and developed. In this Review, we present the recent developments in light driven chiral LCs, i.e., cholesteric and blue phases, LC based smart windows that control the entrance of heat and light from outdoor to the interior of buildings and built environments depending on the weather conditions, LC elastomers for bioinspired, biological, and actuator applications, LC based biosensors for detection of proteins, nucleic acids, and viruses, LC based porous membranes for the separation of ions, molecules, and microbes, living LCs, and LCs under macro- and nanoscopic confinement. The Review concludes with a summary and perspectives on the challenges and opportunities for LCs as smart soft materials. This Review is anticipated to stimulate eclectic ideas toward the implementation of the nature's delicate phase of matter in future generations of smart and augmented devices and beyond.

Label-Free Detection and Spectrometrically Quantitative Analysis of the Cancer Biomarker CA125 Based on Lyotropic Chromonic Liquid Crystal

Compared with thermotropic liquid crystals (LCs), the biosensing potential of lyotropic chromonic liquid crystals (LCLCs), which are more biocompatible because of their hydrophilic nature, has scarcely been investigated. In this study, the nematic phase, a mesophase shared by both thermotropic LCs and LCLCs, of disodium cromoglycate (DSCG) was employed as the sensing mesogen in the LCLC-based biosensor. The biosensing platform was constructed so that the LCLC was homogeneously aligned by the planar anchoring strength of polyimide, but was disrupted in the presence of proteins such as bovine serum albumin (BSA) or the cancer biomarker CA125 captured by the anti-CA125 antibody, with the level of disturbance (and the optical signal thus produced) predominated by the amount of the analyte. The concentration- and wavelength-dependent optical response was analyzed by transmission spectrometry in the visible light spectrum with parallel or crossed polarizers. The concentration of CA125 can be quantified with spectrometrically derived parameters in a linear calibration curve. The limit of detection for both BSA and CA125 of the LCLC-based biosensor was superior or comparable to that of thermotropic LC-based biosensing techniques. Our results provide, to the best of our knowledge, the first evidence that LCLCs can be applied in spectrometrically quantitative biosensing.